LWU701i/LW751i/LX801i/LWU601i/LW651i User's Manual (detailed) Operating Guide

Transcription

1 User's Manual (detailed) Operating Guide

2

3 Projector LWU701i/LW751i/LX801i LWU601i/LW651i User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING Safety Guide WARNING CAUTION NOTICE NOTE Trademark acknowledgment 1

4 Introduction Setting up Remote control Status Monitor...31 Power on/off...35 Operating...37 Adjusting the volume PbyP (Picture by Picture) / PIP (Picture in Picture) 57 EASY MENU IMAGE SETTINGS menu SIZE AND POSITION menu INPUT menu SETUP menu AUDIO menu MENU PREFERENCES OPTION menu NETWORK menu SECURITY menu Maintenance Troubleshooting

5 Introduction Features HDMI TM /Display Port/HDBaseT TM Checking the contents of package Contents of packagesetup Guide WARNING NOTE

6 Introduction Part names Projector , AC WARNING CAUTION 4

7 Part names (continued) Control panel and Indicators STANDBY/ON 35 INPUT MENU 57 LENS SHIFT 41 ZOOM 41 FOCUS SHUTTER 52 FUNCTION FILTER 121 SHUTTER 52 SECURITY 107 LAMP TEMP POWER SHUTTER Introduction 5

8 Introduction Part names (continued) Ports 13~22 COMPUTER IN HDBaseT LAN WIRELESS HDMI 1 HDMI 2 DisplayPort VIDEO SDI AUDIO IN1 AUDIO IN2 L, R AUDIO OUT MONITOR OUT REMOTE CONTROL IN REMOTE CONTROL OUT CONTROL LWU601i/LW651i/LW751i/LX801i LWU701i 6

9 Introduction Part names (continued) Remote control STANDBY 35 ON 35 ID COMPUTER 1 38 COMPUTER 2 VIDEO 38 LAN 38 USB TYPE A USB TYPE B HDMI 1 38 HDMI 2 38 DisplayPort 38 HDBaseT 38 SDI 38 DIGITAL FOCUS + / - 41 ZOOM + / - 41 LENS SHIFT 41 LENS MEMORY LOAD / SAVE 42 LENS LOCK 94 OSD MSG 79 ENTER 33, 57 AV MUTE 37 MENU 57 GEOMETRY 74, 75 PICTURE 63 ~ 65 LAMP 75, 76 RESET 57 ASPECT 39 AUTO 43 MAGNIFY ON OFF 51 VOL FREEZE 52 PbyP 53 MY BUTTON - 1 / 2 / 3 / 4 89, NOTE 116 ID ID 29 7

10 Setting up Installing the lens unit 8

11 Setting up Setting up (continued) 9

12 9.5 Setting up Arrangement T-1T-3Setup Guide Projector top Elevator feet Projector bottom 10

13 Setting up Arrangement (continued) WARNING Install the projector where you can access the power outlet easily. Do not subject the projector to unstable conditions. Do not install the pro things. Do not place the projector where any oils, such as cooking or machine oil, are used. Do not place the projector in a place where it may get wet. Do not block the intake vents and exhaust vents of the projector. 11

14 Setting up Arrangement (continued) CAUTION ventilation. Avoid placing the projector in smoky, humid or dusty place. NOTICE 93 NOTE 12

15 Setting up Connecting with your devices Network Guide WARNING Use only the appropriate accessories. CAUTION For a cable with a core at only one end, connect the end with the core to the projector. NOTE 14~22 About Plug-and-Play capability COMPUTER IN

16 Setting up Connecting with your devices (continued) LWU601i/LW651i/LW751i/LX801i Computer DisplayPort LWU701i Computer DisplayPort 14

17 Setting up Connecting with your devices (continued) NOTE 71 15

18 Setting up Connecting with your devices (continued) LWU601i/LW651i/LW751i/LX801i Computer External device USB wireless adapter Access point LWU701i Computer External device USB wireless adapter Access point 16

19 Setting up Connecting with your devices (continued) WARNING 24, 25 CAUTION LAN 17

20 Setting up Connecting with your devices (continued) LWU601i/LW651i/LW751i/LX801i VCR/DVD/ Blu-ray Disc TM player LWU701i VCR/DVD/ Blu-ray Disc TM player 18

21 Setting up Connecting with your devices (continued) About HDBaseT connection NOTE HDMI HDMI 23 19

22 Setting up Connecting with your devices (continued) LWU601i/LW651i/LW751i/LX801i Another projector Monitor Speakers (Wired) Remote control LWU701i Another projector Monitor Speakers (Wired) Remote control 20

23 Setting up Connecting with your devices (continued) NOTE REMOTE CONTROL IN REMOTE CONTROL OUT REMOTE CONTROL IN OUT REMOTE CONTROL INOUT 21

24 Setting up Connecting with your devices (continued) LWU701i SDI OUT Camera for commercial use NOTE SDI 22

25 Setting up Fastening the cables screw No cable tie With cable tie HDMI cable holder cable tie WARNING CAUTION

26 Setting up Fastening the adapter cover USB wireless adapter WIRELESS WIRELESS DC5V 0.5A LAN WIRELESS WIRELESS DC5V 0.5A WIRELESS DC5V 0.5A LAN WARNING 24

27 Setting up Attaching the terminal cover Terminal cover Hook NOTE 25

28 Setting up Using the security bar and slot 11mm Anti-theft chain or wire security bar Security slot 19mm 15mm WARNING CAUTION NOTE 4 26

29 Connecting power supply Setting up AC AC POWER WARNING NOTICE 27

30 Remote control Installing the batteries WARNING

31 Remote control Using the REMOTE ID function 95 ID ID ID NOTE ID ID ID Changing the frequency of remote control signal MENU MY BUTTON-4 AV MUTE MY BUTTON-1 AV MUTE MY BUTTON-1 MENU MY BUTTON

32 Remote control About the remote control signal 3m m NOTE 95

33 Status Monitor Displaying the condition of the projector NOTE In a normal state 1st line 2nd line # LAN LAN LAN 3rd line

34 Status Monitor Displaying the condition of the projector (continued) NOTE In error state Related messages114 ~ 116) Regarding the indicator lamps V Warnings; 115 LAMP TEMP 120 LAMP TEMP 120 Errors; LAMP 118 TEMP 118 LAMP 118 TEMP 119 LAMP NOTE

35 Status Monitor Displaying the log NOTE 78 FUNCTION ENTER MY BUTTON To display the setup information including usage time FUNCTION ENTER F nd page 1st page 3rd page

36 Status Monitor Displaying the log (continued) NOTE FUNCTIONENTER 75 To display error history 1 V 7 F V 5 NOTE FUNCTIONENTER

37 Turning on the power POWER 117 STANDBY/ON ON POWER 117 Selecting an input signal 38 Turning off the power STANDBY/ONSTANDBY STANDBY/ONSTANDBY POWER POWER 117 POWER POWER Power on/off STANDBY ON STANDBY/ON

38 Power on/off WARNING NOTE 88 88

39 Operating Adjusting the volume VOL + - VOL + / - NOTE Temporarily turning off the screen and audio AV MUTE 81 AV MUTE AV MUTE NOTE CAUTION 52

40 Operating Selecting an input signal INPUT LAN COMPUTER IN HDMI 1 VIDEO HDMI 2 INPUT SDI* HDBaseT DisplayPort NOTE COMPUTER 1, VIDEO, LAN HDMI 1 / 2, DisplayPort, HDBaseT SDI Button Ports COMPUTER 1 COMPUTER IN COMPUTER 2 - VIDEO VIDEO LAN LAN USB TYPE A - USB TYPE B - HDMI 1 HDMI 1 HDMI 2 HDMI 2 DisplayPort DisplayPort HDBaseT HDBaseT SDI SDI* DIGITAL - NOTE 87

41 Operating Selecting an aspect ratio ASPECT For a computer signal LX801i: LWU601i, LW651i, LWU701i, LW751i: ASPECT For HDMI TM, HDBaseT TM, and DisplayPort signals LX801i: LWU601i, LW651i, LWU701i, LW751i: For a video signal LX801i: LWU601i, LW651i, LWU701i, LW751i: For an SDI signal (LWU701i only) For an input signal from the LAN port, or if there is no signal LX801i: LWU601i, LW651i, LWU701i, LW751i: NOTE ASPECT

42 Operating Adjusting the projector s elevator 5 5 WARNING CAUTION Installation angle Vertical and horizontal direction in portrait mode NOTE 40

43 Operating Adjusting the lens Adjusting the zoom and focus ZOOM ZOOM - ZOOM + FOCUS + FOCUS - ZOOM / - ZOOM FOCUS - FOCUS + - ZOOM + - LENS SHIFT NOTE Adjusting the lens position LENS SHIFT LENS SHIFT CENTERING ENTERINPUT FUNCTION LENS SHIFT FOCUS - + LENS SHIFT ZOOM FUNCTION CAUTION NOTE 41

44 Operating Adjusting the lens (continued) Lens memory LOAD FUNCTION FUNCTION LENS MEMORY SAVE: ENTER LOAD: ENTER CLEAR LENS MEMORY: ENTER NOTE LENS MEMORY 42

45 Using the automatic adjustment feature AUTO For a computer signal Operating AUTO For a video signal 70 For a component video signal NOTE 93

46 Operating Correcting the distortion GEOMETRY GEOMETRY NOTE GEOMETRY ENTER KEYSTONE: ENTER NOTE ENTER 44

47 Correcting the distortion (continued) 3D KEYSTONE: ENTER ENTER ENTER INPUT Operating ENTERINPUT 45

48 Operating Correcting the distortion (continued) SAVE: ENTERINPUT LOAD: ENTERINPUT NOTE WARPING: 46

49 Operating Using the EDGE BLENDING features ENTER INPUT 47

50 Operating ENTERINPUT 48

51 Operating ENTERINPUT ENTERINPUT ENTERINPUT Input Image Cropping Input Image Cropping 49

52 Operating NOTE 50

53 Using the magnify feature MAGNIFY ON MAGNIFY ON Operating MAGNIFY ON / OFF MAGNIFY ON For computer signals, HDMI TM (RGB) signals, HDBaseT TM signals, DisplayPort signals, input signals from the LAN port For video signals, DisplayPort signals, HDBaseT signals, SDI signals, or HDMI TM signals MAGNIFY OFF NOTE MAGNIFY ON 51

54 Operating Temporarily freezing the screen FREEZE 79 FREEZE FREEZE NOTE Temporarily shading the screen SHUTTER SHUTTER SHUTTER SHUTTER SHUTTER CAUTION 37 NOTE 88 52

55 PbyP (Picture by Picture) / PIP (Picture in Picture) Operating PbyP PbyP PbyP PbyP PbyP NOTE LAN PbyP MENU 116

56 Operating PbyP (Picture by Picture) / PIP (Picture in Picture) (continued) Setting information Changing the main area 54

57 PbyP (Picture by Picture) / PIP (Picture in Picture) (continued) Operating Changing the picture input signal INPUT NOTE 87 55

58 Operating PbyP (Picture by Picture) / PIP (Picture in Picture) (continued) PbyP / PIP SWAP function MY BUTTON89 NOTE Changing the size of main area in PbyP mode Changing the position of sub area in PIP mode 73 56

59 Using the menu function Operating MENU ENTER MENU RESET INPUT SHUTTER MENU In the EASY MENU In the ADVANCED MENU ENTER ENTER 57

60 Operating Using the menu function (continued) MENU ENTER NOTE RESET Indication in OSD (On Screen Display) Indication Meaning MENU 58

61 Operating Using the menu function (continued) Menu items Menu EASY MENU 60 IMAGE SETTINGS 62 SIZE AND POSITION 66 INPUT 69 SETUP 74 AUDIO 80 MENU PREFERENCES 81 OPTION 87 NETWORK 100 SECURITY 101 Items 59

62 EASY MENU Item ASPECT KEYSTONE 3D KEYSTONE PICTURE MODE Description

63 EASY MENU Item ECO MODE INSTALLATION RESET FILTER HOURS LANGUAGE ADVANCED MENU EXIT Description ENTER ENTER 61

64 IMAGE SETTINGS menu ENTER Item BRIGHTNESS CONTRAST COLOR TINT SHARPNESS DYNAMIC IRIS Description 62

65 IMAGE SETTINGS menu Item PICTURE QUALITY Description PICTURE MODE GAMMA

66 IMAGE SETTINGS menu Item Description PICTURE QUALITY (continued) GAMMA (continued) ENTER COLOR TEMP ENTER 64

67 IMAGE SETTINGS menu Item PICTURE QUALITY (continued) MY MEMORY Description eclarity HDCR Advanced Color Adjustment ENTER MY BUTTON 89 65

68 SIZE AND POSITION menu ENTER Item ASPECT Description For a computer signal LX801i: LWU601i, LW651i, LWU701i, LW751i: For HDMI TM, HDBaseT, and DisplayPort signals LX801i: LWU601i, LW651i, LWU701i, LW751i: For a video signal LX801i: LWU601i, LW651i, LWU701i, LW751i: For an SDI signal (LWU701i only) For an input signal from the LAN port, or if there is no signal LX801i: LWU601i, LW651i, LWU701i, LW751i: 66

69 SIZE AND POSITION menu Item OVER SCAN V POSITION H POSITION Description RESET above LAN HDMI 1 / 2, HDBaseT, DisplayPort SDI RESET above LAN HDMI 1 / 2, HDBaseT, DisplayPort SDI 67

70 SIZE AND POSITION menu Item H PHASE H SIZE AUTO IMAGE Description LAN HDMI TM 1 / 2 HDBaseT TM DisplayPort SDI LAN VIDEO HDMI 1 / 2 HDBaseT DisplayPort SDI RESET For a computer signal For a video signal

71 INPUT menu ENTER Item PROGRESSIVE VIDEO NR COLOR SPACE Description LAN HDBaseT 69

72 INPUT menu Item VIDEO FORMAT DIGITAL FORMAT Description VIDEO VIDEO HDMI 1 2, HDBaseT, and DisplayPort HDMI 1 2, HDBaseT, DisplayPort, and SDI DIGITAL RANGE 70

73 INPUT menu Item COMPUTER IN Description COMPUTER IN FRAME LOCK 71

74 INPUT menu Item RESOLUTION Description COMPUTER IN ENTER ENTER ENTER 72

75 INPUT menu Item PbyP / PIP SETUP Description PIP POSITION 56 PbyP / PIP FRAME LOCK

76 SETUP menu ENTER Item GEOMETRY CORRECTION Description KEYSTONE Correcting the distortion D KEYSTONE Correcting the distortion WARPING 4445 EDGE BLENDING 47 ~ 50 74

77 SETUP menu Item GEOMETRY CORRECTION (continued) Description TEST PATTERNS LAMP & FILTER ECO MODE LAMP HOURS RESET Replacing the lamp

78 SETUP menu Item LAMP & FILTER (continued) HDCR LiteLoc Description FILTER HOURS LAMP & FILTER RESET FILTER MESSAGE 76

79 SETUP menu Item PICTURE POSITION INSTALLATION Description ENTER INPUT

80 SETUP menu Item STANDBY MODE COLOR UNIFORMITY Description AUDIO OUT MONITOR OUT 78

81 SETUP menu Item Description OSD MESSAGE FREEZE OSD MSG OSD MSG 79

82 AUDIO menu ENTER Item VOLUME SPEAKER Description AUDIO OUT AUDIO SOURCE AUDIO IN1 AUDIO IN2 HDMI 1 HDMI 2 DisplayPort HDBaseT LAN VIDEO COMPUTER IN 86 80

83 MENU PREFERENCES ENTER Item LANGUAGE MENU POSITION BLANK Description ENTERINPUT MENU 37 AV MUTE 83 81

84 MENU PREFERENCES Item AUTO BLANK START UP Description

85 MENU PREFERENCES Item My Screen Description ENTER INPUT RESET ENTER INPUT RESET LAN, HDMI 1 / 2, HDBaseTSDI

86 MENU PREFERENCES Item My Screen Lock Description 102 ENTER SOURCE NAME ENTERINPUT ENTERINPUT ENTERINPUT 84

87 MENU PREFERENCES Item SOURCE NAME continued TEMPLATE Description ENTERINPUT RESET INPUT ENTERINPUT ENTERINPUT ENTERINPUT ENTERINPUT ENTER MY BUTTON 89 RESET 85

88 MENU PREFERENCES Item Closed Caption C.C. Description DISPLAY MODE CHANNEL

89 OPTION menu Item Description below SOURCE SKIP AUTO SEARCH 53 87

90 OPTION menu Item DIRECT POWER ON Description 35 below AUTO POWER OFF SHUTTER TIMER CONTROL Turning off the power 35 88

91 OPTION menu Item MY BUTTON Description MY BUTTON 14 7 ENTER ENTERINPUT 5. My Image Function Network Guide 6. Messenger Function Network Guide MY BUTTON

92 OPTION menu Item MY BUTTON (continued) Description How to setup the item NOTE Item DATE & TIME SPECIFIC DATE PROGRAM EDIT Description SCHEDULE How to activate (DATE AND TIME / SPECIFIC DATE) 90

93 Item Description OPTION menu SCHEDULE (continued) PROGRAM EDIT RETURN SELECT COPY TO APPLY 91

94 OPTION menu Item Description How to edit the selected PROGRAM SCHEDULE (continued) NOTE 92

95 OPTION menu Item Description ENTER ALTITUDE SERVICE AUTO IMAGE ADJUST

96 OPTION menu Item SERVICE (continued) Description LENS TYPE ENTER ENTER LENS LOCK ZOOM ZOOM + - FOCUS + - LENS SHIFT LENS MEMORY 94

97 OPTION menu Item SERVICE (continued) Description KEY LOCK STANDBY ON STANDBY/ON REMOTE RECEIV. REMOTE FREQ REMOTE ID ID 95

98 OPTION menu Item Description CONTROL SERVICE (continued) COMMUNICATION below Network Guide COMMUNICATION TYPE CONTROL CONTROL 7. Network Bridge Function Network Guide CONTROL 97 96

99 Item SERVICE (continued) COMMUNICATION (continued) Description OPTION menu SERIAL SETTINGS CONTROL BAUD RATE PARITY 96 TRANSMISSION METHOD CONTROL 98 97

100 OPTION menu Item SERVICE (continued) COMMUNICATION (continued) Description RESPONSE LIMIT TIME CONTROL CONTROL 97 STACK Instant Stack Guide 98

101 OPTION menu Item Description INFORMATION SERVICE (continued) 106 FACTORY RESET 99

102 NETWORK menu Network Guide 100

103 SECURITY menu Enter to the SECURITY menu LWU601i/LWU701i LW651i/LW751i LX801i below If you have forgotten your password RESET INPUT Item SECURITY PASSWORD CHANGE Description ENTER 101

104 SECURITY menu Item My Screen PASSWORD Description 1 Turning on the My Screen PASSWORD ENTER 2 Turning off the My Screen PASSWORD 3 If you have forgotten your password 102

105 SECURITY menu Item PIN LOCK Description 1 Turning on the PIN LOCK ENTER COMPUTER 1INPUT 2 Turning off the PIN LOCK 3 If you have forgotten your PIN code RESET INPUT

106 SECURITY menu Item TRANSITION DETECTOR Description 1 Turning on the TRANSITION DETECTOR ENTER ENTER 2 Turning off the TRANSITION DETECTOR 3 If you have forgotten your password 104

107 SECURITY menu Item MY TEXT PASSWORD Description 1 Turning on the MY TEXT PASSWORD ENTER 2 Turning off the MY TEXT PASSWORD 3 If you have forgotten your password 105

108 SECURITY menu Item MY TEXT DISPLAY MY TEXT WRITING Description ENTER ENTERINPUT RESET INPUT ENTERINPUT ENTERINPUT ENTERINPUT ENTERINPUT 106

109 SECURITY menu Item SECURITY INDICATOR STACK LOCK Description SECURITY 103, 104 Instant Stack Guide 107

110 Maintenance Replacing the lamp Type number : (DT01885) <LWU701i/LW751i/LX801i> (DT01875) <LWU601i/LW651i> Replacing the lamp In case of replacement by yourself, follow the following procedure. MENU 3 4, 5 6 CAUTION NOTE 108

111 Maintenance Replacing the lamp (continued) Lamp warning HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING About disposal of a lamp: 109

112 Maintenance Type number : (UX40821) 3 2 4,

113 Maintenance 11 MENU ENTER RESET WARNING NOTE 111

114 Maintenance Replacing the internal clock battery OPEN HITACHI MAXELL CR2032CR2032H CLOSE OPEN CLOSE OPEN CLOSE OPEN CLOSE OPEN CLOSE WARNING 112

115 Other care Maintenance Inside of the projector Caring for the lens Caring for the cabinet and remote control WARNING CAUTION NOTICE

116 Troubleshooting WARNING Troubleshooting Warnings displayed on the Status Monitor 31 Related messages Regarding the indicator lamps Related messages Message Description There is no input signal. 114

117 Troubleshooting Related messages (continued) Message Description The horizontal or vertical frequency of the input An improper signal is input. The internal temperature is rising. User's Manual (concise)

118 Troubleshooting Related messages (continued) Message Description Cleaning and replacing the air The button operation is not available

119 Regarding the Troubleshooting indicator lamps Regarding the indicator lamps Indicator Status Description Orange The projector is in a standby state. Green The projector is warming up. Green The projector is in an on state. Orange The projector is cooling down. 117

120 Regarding the indicator lamps Regarding the indicator lamps (continued) Indicator Status Description Red descretionary Red Red Red Red Red Red The projector is cooling down. A certain error has been detected. POWER The cooling fan is not operating. The lamp does not light, and there is a possibility that interior portion has become heated. Otherwise, AC power supply is unstable (ACBLK). Replacing the lamp 118

121 Regarding the indicator lamps (continued) Indicator Status Red Red Regarding the indicator lamps Description The interior portion has become heated. Red Red Blinking at the same time Red Red Blinking alternately or Blinking at the same time Cleaning and Other error has occured. 119

122 Regarding the indicator lamps Regarding the indicator lamps (continued) Indicator Status Orange or Red Description dirty Yellow PIN LOCK function is active. 103 Yellow The mechanical shutter is closed. Green Red Blinking alternately There is a possibility that the interior portion has become overcooled. 120

123 Regarding the indicator lamps Regarding the indicator lamps (continued) NOTE SECURITY 107 SHUTTER Temporarily shading the screen 52 FILTER FILTER indicator off Description Orange Red NOTE FILTER FILTER Resetting all settings

124 Troubleshooting Issues that may be easy to be mistaken for machine defects Issue Cases not involving a machine defect The electrical power cord is not plugged in. The main power source has been interrupted during operation such as by a power outage (blackout), etc. Either there is no lamp and/or lamp cover, or either The signal cables are not correctly connected. Signal source does not correctly work. The input changeover settings are mismatched. AV MUTE function is working. Reference page

125 Troubleshooting Issues that may be easy to be mistaken for machine defects (continued) Issue Cases not involving a machine defect The signal cables are not correctly connected. The volume is adjusted to an extremely low level. The AUDIO SOURCE/SPEAKER setting is not correct. LAN The signal cables are not correctly connected. The brightness is adjusted to an extremely low level. The computer cannot detect the projector as a plug and play monitor. The shutter is closed. SHUTTER SHUTTER Reference page

126 Troubleshooting Issues that may be easy to be mistaken for machine defects (continued) Issue Cases not involving a machine defect The batteries in the remote control are near the end. The ID numbers set in the projector and the remote control are different. ID ID The FREEZE function is working. FREEZE Color settings are not correctly adjusted. COLOR SPACE setting is not suitable. The brightness and/or contrast are adjusted to an extremely low level. The projector is operating in Eco mode. The lamp is approaching the end of its product lifetime. The lens cover is attached. Either the focus and/or horizontal phase settings are not properly adjusted. FOCUS + / - Reference page

127 Troubleshooting Issues that may be easy to be mistaken for machine defects (continued) Issue Cases not involving a machine defect The lens is dirty or misty. Caring for the lens When the projector is operating in Eco mode, The OVER SCAN ratio is too big. Excessive VIDEO NR. The FRAME LOCK function cannot work on the current input signal. The POWER SAVE function is working. The COMMUNICATION TYPE for the CONTROL port is set to NETWORK BRIDGE. The POWER SAVE function is working. The same network address is set for both wireless and wired LAN. Reference page

128 Troubleshooting Issues that may be easy to be mistaken for machine defects (continued) Issue Cases not involving a machine defect Reference page The POWER SAVE function is working. 78 The POWER SAVE function is working. 78 The connected equipment may not be supported by HDBaseT. 14 Check if the IR setting is OFF under HDBaseT. 95 Check if the LAN setting is HDBaseT. Check if the LAN setting is HDBaseT. This projector is compatible with 100BASE-T only Check if the extension connector is compatible with CAT5e. 126

129 Troubleshooting Issues that may be easy to be mistaken for machine defects (continued) Issue Cases not involving a machine defect Reference page The NETWORK BRIDGE function is turned off. 96 The POWER SAVE function is working. 78 The internal clock has been reset. 127

130 Troubleshooting Issues that may be easy to be mistaken for machine defects (continued) Issue POWER Cases not involving a machine defect Disconnect the LAN cable and check that the projector is working properly. Reference page NOTE 128

131 Setup Guide End User License Agreement for the Projector Software 129

132