Original Zeiss Axiovert Illuminator. Nanodyne Replacement Illuminator for Zeiss Axiovert
|
|
- Morris Henry
- 5 years ago
- Views:
Transcription
1 Zeiss xiovert Replacement Instructions - Original and Nanodyne Replacement Original Zeiss xiovert Illuminator Nanodyne Replacement Illuminator for Zeiss xiovert Copyright 06 Nanodyne Measurement Systems. Document authorized for installation of Nanodyne equipment only. Wayne onin /5/09 PN 0760 Zeiss xiovert OF 6
2 Zeiss xiovert Replacement Instructions - Included Items dditional Items Included ut Not Shown: PN 090 Hex Key 5/6 inch for set screw PN 098 TPI Main ssy with Lens - Top djust PN 07 Power Supply - XP Power 5V Fixed lade US Input/US Output and PN 07 Cable ssy.5mm ID x.5mm OD R plug to US, 6 foot. The illuminator may be powered by plugging the cable into the power supply provided, or into a suitable US port on a computer or other device. PN 067 rass Tip Set Screw 8- Power supplies are subject to substitution without notice due to availability issues and changes in regulations. PN 0756 Zeiss xiovert Mounting Ring Copyright 06 Nanodyne Measurement Systems. Document authorized for installation of Nanodyne equipment only. Wayne onin /5/09 PN 0760 Zeiss xiovert OF 6
3 Zeiss xiovert Replacement Instructions - Remove Original Illuminator, part. Remove the lamp housing by twisting counter clock wise and pulling it off. Note the three screws holding the lamp/condenser lens assembly in place. Do Not Remove the rm From the Microscope. It is shown that way only because that is all we had access to. Copyright 06 Nanodyne Measurement Systems. Document authorized for installation of Nanodyne equipment only. Wayne onin /5/09 PN 0760 Zeiss xiovert OF 6
4 Zeiss xiovert Replacement Instructions - Remove Original Illuminator, part. Remove the three screws holding the lamp/condenser lens assembly. Retain the three screws and the filter holder as they will be used with the new illuminator. Cut the power leads to the old lamp as shown above. Either insulate the end of the wires remaining in the microscope, or completely remove the wire and/or original power supply so there is no possibility of power being applied to the old wiring. Copyright 06 Nanodyne Measurement Systems. Document authorized for installation of Nanodyne equipment only. Wayne onin /5/09 PN 0760 Zeiss xiovert OF 6
5 Zeiss xiovert Replacement Instructions - Remove Original Illuminator, part, Replace Filter Holder. Replace the filter holder in its original position as shown above. Pull the illuminator assembly free from the arm as shown above. It is no longer needed. Copyright 06 Nanodyne Measurement Systems. Document authorized for installation of Nanodyne equipment only. Wayne onin /5/09 PN 0760 Zeiss xiovert 5 OF 6
6 Zeiss xiovert Replacement Instructions - Mount Nanodyne Illuminator. Using the three screws from the original illuminator, attach PN 0756 adapter ring as shown above. lthough not visible above, the brass tip set screw should be visible but not protruding into the inner diameter of the adapter ring. Copyright 06 Nanodyne Measurement Systems. Document authorized for installation of Nanodyne equipment only. Insert PN 0759 Illuminator ssembly into the adapter ring and secure in place using the 5/6 hex key to tighten the set screw. fter attaching the power supply, the unit is ready to operate. To avoid confusion it would be good to black out the "6V 5W / 0W" text from the original illuminator with a permanent marker. Wayne onin /5/09 PN 0760 Zeiss xiovert 6 OF 6
Nanodyne Replacement Illuminator for Zeiss Axiovert Microscope Installation Instructions
Nanodyne Replacement Illuminator for Zeiss xiovert Microscope Installation Instructions Note that this photo shows an older version of the illuminator. The current version is shown on the sheet. Original
More informationOlympus BX43_46 Installation Instruction (OEM Adjust) 4
Olympus X_6 Installation Instruction (OEM djust) If you are not an experienced repair tech please consider the alternate (easy install) version dditional Items Included ut Not Shown: PN 07 Olympus X Illuminator
More informationOlympus BX43 and BX46 Installation Instruction for Microscope End Users (easy install version) 4
Olympus X and X6 Installation Instruction for Microscope End Users (easy install version) PN 07 Olympus X_6 Illuminator ssy dditional Items Included ut Not Shown: PN 077 Hex Key mm PN 060 Hex Key mm M
More informationMicroscope with original illuminator. Microscope with Nanodyne replacement illuminator.
Nanodyne Replacement Illuminator for Zeiss xioskop Microscope Microscope with original illuminator. Microscope with Nanodyne replacement illuminator. Copyright 09 Nanodyne Measurement Systems. Document
More informationIncluded Items Not Shown:
PN 09 HP Illuminator ssy Olympus HS Installation Instructions - Nanodyne Illuminator for Olympus HS Microscope Figure. Parts included in Olympus HS Illuminator System. Included Items Not Shown: PN 057.5mm
More informationBPL SERIES INSTALLATION INSTRUCTIONS THIS SHEET CONTAINS IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
BPL SERIES INSTALLATION INSTRUCTIONS Important Warning THIS SHEET CONTAINS IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS. This product must be installed in accordance with National Electrical
More informationCONSOLE CONNECTOR KIT 9501 INSTALLATION INSTRUCTIONS
CONSOLE CONNECTOR KIT 9501 INSTALLATION INSTRUCTIONS FOR USE WITH: HAMMOND Organ Models L-100, M-100 Series, M-l, M-2, M-3 LESLIE Speaker Models 760, 770, 825 KIT CONTENT Console Connector Assembly 043075
More information1. Mount the echo and tremolo control switches under the keyboard shelf, in a position convenient for the organist.
CONSOLE CONNECTOR KIT 8101 INSTALLATION INSTRUCTIONS FOR USE WITH: HAMMOND Organ Models A-100, D-100, RT2, RT3 LESLIE Speaker Models 122, 122RV KIT CONTENT Console Connector Assembly 047357 Echo Control
More informationHeathkit HR-1680 PC Card Extender. Heathkit HR-1680 PC Assembly Extender Assembly
Heathkit HR-1680 PC Assembly Extender Assembly Version Date Author Comment 1.0 August 15, 2009 RM Groh Original draft Table of Contents Introduction...1 Heathkit s Approach...2 Parts Required...3 Assembly
More informationParts List: Part # Tools List: Instructions:
Parts List: Part # 1 pair of Dayton Audio B652s 300-652 1 Dayton Audio DTA-2 amplifier 300-385 1 MP3 module 320-350 1 7805 +5 VDC voltage regulator 7805 1 12 VDC 2A power supply 129-077 1 2.1 mm panel
More informationCAMERA ASSEMBLY. Removal/Replacement of the Camera Box Assembly APR-CA. Install Camera Assembly. Remove Camera Assembly
CAMERA ASSEMBLY Removal/Replacement of the Camera Box Assembly APR-CA REQUIRED TOOLS: 9/64 hex key Small flat-tip screwdriver Remove Camera Assembly camera 1. Locate the camera assembly underneath the
More informationCONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Receptacle Kit and a Protective Cover Assembly.
Revised Sept-28-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Instructions CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Kit
More informationPreparing for a Docking Drawer Slim Installation To prepare for a successful Docking Drawer Slim installation please ensure that the cable management
Docking Drawer Install Manual Docking Drawer Slim Series Applicable Models: 0290 00031(W) / 24 0290-00030(W) / 21 0290-00047(W) / 18 0230-00004. r6 1/19/2016 CAUTION READ CAREFULLY Failure to follow these
More informationUSBCNC USB Disk Key reader for CNC Controls Machine Mount instructions
USBCNC USB Disk Key reader for CNC Controls Machine Mount instructions 2008-2015 Calmotion LLC, All rights reserved Calmotion LLC 21720 Marilla St. Chatsworth, CA 91311 www.calmotion.com Introduction This
More informationM20 Metallurgical Microscope User s Manual. Fein.
M20 Metallurgical Microscope User s Manual info@feinoptic.com M20 Microscope Components Lamp Housing C-Mount Adapter Eyepieces Analyzer Objective Lens Coarse Focus Mechanical Stage Stage X-Y Control Fine
More informationUpgrade Instructions. P/N Revision A. October Printer Terminal Holder * *
Upgrade Instructions P/N 96-08-0 Revision A October 000 480 Printer Terminal Holder P/N 96-08-0 Revision A *96080* Instructions This terminal holder connects the INTERMEC R 600 Series and 700 Series Computers
More informationZ-Truck (Vertical Moving) Z-truck Flag. Y-Truck (Horizontal Moving) FIGURE 1: VIEW OF THE Z-TRUCK. Flexshaft Assembly
Replacing the LCD Cable To remove and replace the LCD Cable you will need the following tools: #2 Phillips screwdriver (magnetic tip preferred) Socket wrench with 10mm socket Removing the Side Panel 1.
More informationMicroscope. Dual Magnification Microscope 20X / 40X. Base: 115 x 180mm Net weight: 4.0kg. Stereo Zoom Microscope 7X to 45X
Dual Magnification Microscope XTJ6000-B1 Magnification: 10X/20X, 10X/30X, 20X/40X Objective: 1X/2X, 1X/3X, 2X/4X Working distance: XTJ6012: 110mm, XTJ6013: 102mm, XTJ6024: 90mm Illuminator: 8W fluorescent
More informationArecont Vision MegaDome Installation Manual
0 P age MegaDome Installation Manual. recont Vision MegaDome B. Mounting template C. Magnetic core D. Pack of four (4) wood screws and four (4) dry wall anchors E. One double sided hex key F. One single
More informationRING LIGHT. LED Strobe Indicator ON = Light Active Green Indicator LED
R80 Series RING LIGHT product introduction The all metal construction of the Series of lights provides a small particle resistant and all around durable light. Its simple plug and play 5 Pin M12 connector
More informationUHP-T-LED User Manual
UHP-T-LED User Manual Ver 03 July 2014 UHP-T-LED System Description The UHP-T-LED is an Ultra High Power LED light source for fluorescence microscopy, Optogenetics, High power illumination and other applications.
More informationCAUTION READ CAREFULLY
DOCKING DRAWER INSTALL MANUAL, 0230-00004 Rev 2 7/1/15 Applicable Models: 0290-00030, 0290-00031 JTech Solutions, Inc. 12893 Alcosta Blvd. Ste M San Ramon, CA 94583 www.jtechsolutions.us CAUTION READ CAREFULLY
More informationMi50 Inverted Microscope User s Manual. Fein.
Mi50 Inverted Microscope User s Manual Fein info@feinoptic.com Mi50 Microscope Components Siedentopf Trinocular Head Stage Plate Mechanical Stage Locking Screw Hex Wrench Storage Beam Splitter Dust Protector
More informationIS-DM220/IR/HB IS-DM220
IS-DM220/IR/HB IS-DM220 Installation Guide Indoor/Outdoor Ver. 1.2 00P6NX223ZXSEA2 Table of Contents 1. Indoor Camera Installation... 3 1.1 Hard Ceiling... 3 1.2 In-Ceiling (T-Bar) Mounting... 13 1.3 4S
More informationLANCNC FTP Data Server for CNC Controls Machine Mount instructions
LANCNC FTP Data Server for CNC Controls Machine Mount instructions 2008-2016 Calmotion LLC, All rights reserved Calmotion LLC 21720 Marilla Street Chatsworth, CA 91311 www.calmotion.com Introduction This
More informationShadowLESS lighting systems for microscopy
ShadowLESS lighting systems for microscopy Brightfield illumination (BF) BF-5400 BF-6500 Darkfield illumination (DF) DF-5400 DF-6500 INSTRUCTION MANUAL CONTENTS A. GENERAL INSTRUCTIONS 1 A1. Safety instructions
More informationRING LIGHT. ON = Light Rest (LED inactive) OFF = LED/Light Ready Green Indicator LED
product introduction ODR130-16 Series RING LIGHT OverDrive The ODR130-16 Series ring light features an Overdrive driver with NPN or PNP signal options. The all metal construction of the Ring Light Series
More informationM40 and M40RT Series. Metallurgical Microscopes
M40 and M40RT Series Metallurgical Microscopes M40 / M40RT Metallurgical Microscope Features LWD Plan Achromat MET Infinity Corrected Objectives Part # Objective N.A. FMPLN5 FMPLN10 FMPLN20 FMPLN50 5x
More informationABM's High Resolution Mask Aligner Features:
ABM's High Resolution Mask Aligner is a very versatile instrument with interchangeable light sources which allow Near-UV (405-365 nm) as well as Mid- and Deep-UV (254 nm, 220 nm) exposures in proximity
More informationUSBCNC-SW USB Disk Key reader for CNC Controls Machine Mount instructions for Universal Switcher Version
USBCNC-SW USB Disk Key reader for CNC Controls Machine Mount instructions for Universal Switcher Version 2015 Calmotion LLC, All rights reserved Calmotion LLC 21720 Marilla Street Chatsworth, CA 91311
More informationPalomar. Metallurgical Microscopes. Palomar Metallurgical Microscopes
Palomar Metallurgical Microscopes 1 2 3 4 Ergonomically inclined head with eyetubes at 30 places user in the best working position, creating less tension and fatigue. Interpupillary distance is adjustable
More informationArecont Vision MegaDome TM Installation Manual
0 P age MegaDome Installation Manual. recont Vision MegaDome TM B. Mounting template C. Magnetic core D. Pack of four (4) wood screws and four (4) dry wall anchors E. One double sided hex key F. One single
More information9100 Series. Card Edge Fixture Kit. P/N September , John Fluke Mfg. Co., Inc. All rights reserved. Litho in U.S.A.
9100 Series Card Edge Fixture Kit P/N 830349 September 1987 1987, John Fluke Mfg. Co., Inc. All rights reserved. Litho in U.S.A. CONTENTS Section Title Page 1. Introduction......................................
More informationTerminal Blocks - Single Row. Series A2000, LP2000 & CB2000 Single Row Terminal Blocks
Series A2000, LP2000 & C2000 Single Row Terminal A20510807WR SPECIFICATIONS Rating: A2: 30A, 300V* LP2: 30A, 150V* C2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range: #12-22 AWG CU Screw Size:
More informationMemory Expansion for DriveLogix Controller
Installation Instructions Memory Expansion for rivelogix ontroller!!! TTENTION: To avoid an electric shock hazard, verify that the voltage on the bus capacitors has discharged before performing any work
More informationInstallation Guide. Retrofit Kit for USB Ready Intraoral Systems
Installation Guide Retrofit Kit for USB Ready Intraoral Systems Table of Contents Wall-Mount Retrofit Kit... 2 Introduction... 2 Connecting the Articulating and Horizontal Arm Cables... 2 Installing the
More informationSetup Guide. Confirming the Installation Space. Installation space (W x D x H) 70.5 x 66.3 x 61.5 inches (1790 x 1684 x 1560 mm) 23.
Introductory Information Setup Guide ENGLISH Read this manual before attempting to operate the printer. Keep this manual in a handy location for future reference. Caution Instructions in this Setup Guide
More informationLUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, ring nut fixing LUMOTAST 25 keylock switch 1-30 LUMOTAST 25 keylock switch 1-31
TAST General data TAST pushbutton range Illuminable pushbuttons and signal lamps. Please order lamps/leds separately. Mounting hole diameter: 6.2 mm 42 V/00 ma max. Water-jet proof IP65 Low profile Lamp
More informationSeeburg JCU-DEC Kit Convert Your Seeburg DEC Wallbox Into a Jukebox
Seeburg JCU-DEC Kit Convert Your Seeburg DEC Wallbox Into a Jukebox MP3 Compact Flash Player Coin Operated or Free Play Integrated Power Amplifier Line-Out to External Amplifier Programmable Autoplay IR
More informationReplacement Instructions
imac G5 Inverter, 20-inch Replacement Instructions Follow the instructions in this document carefully. Failure to follow these instructions could damage your equipment and void its warranty. Note: Online
More informationUser Manual. Binocular Zoom Stereo Microscope with Boom Stand. MicroscopeNet.com
User Manual Binocular Stereo Microscope with Boom Stand Model W42C1 Series MicroscopeNet.com Table of Contents i. Caution.. 1 ii. Care and Maintenance... 1 1. Component Illustration... 2 2. Installation...3
More informationDescription: Detailed procedure on removing old bushing and installing new Brake Bushing Replacement Kit 10447
Procedure: BRAKE BUSHING REPLACEMENT PROCEDURE Product: Document #: Rev: Page: MODEL 7000, 7000A, & 8000 GYRO 078 1 1 of 14 Description: Detailed procedure on removing old bushing and installing new Brake
More informationM50 and M50RT Series. Brightfield / Darkfield Metallurgical Microscopes
M50 and M50RT Series Brightfield / Darkfield Metallurgical Microscopes M50 / M50RT Brightfield / Darkfiefld Metallurgical Microscope Features Semi APO BF MET Infinity Corrected Objectives Part # Objective
More informationRaven Adapter Harness
Note: Indented items indicate parts included in an assembly listed above Quantity by System Part Name/Description Part Number With Switch Box With Built-in Switches Raven Harness Adapter Kit 4100504 1
More informationWARNING SPECIAL HANDLING REQUIRED!!!
WRNING SPECIL HNDLING REQUIRED!!! Electrostatic Discharge (ESD) Information Electrostatic discharge, the uncontrolled release of static electricity, can damage electronic parts and assemblies. ESD occurs
More informationUpgrade Instructions Printer Terminal Holder
Upgrade Instructions 6820 Printer Terminal Holder Instructions Terminal Holder Installation Kit The terminal holder connects INTERMEC R computers to the 6820 Printer. Do these instructions, in the order
More informationRichter Optica. Instructions for: S6-BL, S6-TS, S6-SPS, S6-ILST Models
Richter Optica info@richter-optica.com Instructions for: S6-BL, S6-TS, S6-SPS, S6-ILST Models Trinocular port for c-mount adapter Zoom Knob Focusing Holder Clamp Diopter adjustable eyepieces Magnification
More informationNational Optical & Scientific Instruments Inc Tri-County Parkway Schertz, Texas Phone (210) Fax (210)
National Optical & Scientific Instruments Inc. 6508 Tri-County Parkway Schertz, Texas 78154 Phone (210) 590-9010 Fax (210) 590-1104 INSTRUCTIONS FOR STEREOSCOPIC ZOOM MICROSCOPE MODELS 420-430PHF-10 (Binocular
More informationDear user. You will find actual information about our products on Seite 1 / 6
User manual THALES EASY Dear user Thank you for using the THALES EASY. This tonearm is designed differently than all other tonearms. If you follow this manual accurately the most precise analogue playback
More informationPrinthead alignment. 1. Turn the printer off. 2. Remove the top cover. See Additional information top cover removal on page 8.
Printhead alignment Warnings: Whenever a printhead is replaced, it is necessary to perform the Mechanical alignment. Then, if a black printhead is replaced, perform the Black Printhead electronic alignment
More informationDisplay Lights. Display Lights. SLC30-IPS Series: 1.18" (30mm) SLC30-IPS Series Panel Mounted Annunciators
S30-IPS Series: 1.18" (30mm) S30-IPS Series Panel Mounted Annunciators The S30-IPS combination display lights with control units combine display lights with control units such as pushbuttons, illuminated
More informationEPILOG LASER Table Mountain Parkway Golden, Colorado Phone FAX
EPILOG LASER 16371 Table Mountain Parkway Golden, Colorado 80403 Phone 303-277-1188 - FAX 303-277-9669 www.epiloglaser.com Procedure Title: Replacing the Optics in your FiberMark Laser Engraver Tools Needed:
More informationTransit Color Light Signal. (6-3/8 Outer Lens Diameter)
645 Russell Street Batesburg, SC 29006 Service Manual 7080 Transit Color Light Signal (6-3/8 Outer Lens Diameter) Installation, Operation and Maintenance November, 997 997, Union Switch & Signal Inc. Printed
More informationRSS Series Wired Electronic Ballasts
RSS Series Wired s Specifications Charts RSS Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline 120 Volts, 50/60Hz No. of Lamp Circuits
More informationOperating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
More informationM40 Microscope User s Manual
M40 Microscope User s Manual for M40 and M40RT Microscope Components: Trinocular Port Eyepieces Beam Splitter Field Diaphragm Adjustment Aperture Diaphragm Adjustment Filter Slots Analyzer Polarizer Hex
More information* * Agilent Power Distribution Unit (PDU) Installation Guide
Agilent Power Distribution Unit (PDU) Installation Guide For use with Agilent PDU kits and PDU installation kits for Agilent instrument racks June 2008 Edition 7 E0608 *5000-0039* 5000-0039 Notice The
More informationJAN 16 Rev B
ANSI C136.41-2013 Rotatable Dimming Receptacles Application Specification 20 JAN 16 Rev B NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
More informationArtisan Scientific is You~ Source for: Quality New and Certified-Used/Pre:-awned ECJuiflment
Looking for more information? Visit us on the web at http://www.artisan-scientific.com for more information: Price Quotations Drivers Technical Specifications. Manuals and Documentation Artisan Scientific
More informationSurvival Laser SL-002PB Laser Parts Bundle w/g-1 Lens Assembly & Operation Instructions
Survival Laser SL-002PB Laser Parts Bundle w/g-1 Lens Assembly & Operation Instructions WARNING: READ ALL INSTRUCTIONS AND THE ENCLOSED SAFETY PRECAUTIONS BEFORE ASSEMBLY AND USE Assemble and use these
More informationSurvival Laser SL-005PB Laser Parts Bundle Assembly & Operation Instructions
Survival Laser SL-005PB Laser Parts Bundle Assembly & Operation Instructions WARNING: READ ALL INSTRUCTIONS AND THE ENCLOSED SAFETY PRECAUTIONS BEFORE ASSEMBLY AND USE Assemble and use these parts ONLY
More informationQuick Start Guide. Mounting the Essential Plus and Elite
Quick Start Guide Congratulations on purchasing an Essential Plus or Elite access control system. This Quick Start Guide provides simple instructions on how to get the system up and running. For more detailed
More informationFront View. Right Section View. Back View. Assy. Number Assy. Description A Control unit, MDU. Date 08.
18 av 94-2013-11-05 Front View Right Section View Back View 2011-10-14 Date 08 Revision Drawn KRT 6400007 Control unit, MDU 1:2 19 av 94-2013-11-05 1 Tighten lens nuts very carefully, lenses break easily
More informationMounting DIGITAL DISPLAY
Mounting The Class digital display mounts in a. by. cutout. Overall area necessary for installation is. by.. Two 0.0 diameter holes are provided for mounting screws..0".0..0.900 Ø 0.0" () HOLES."." DIGITAL
More informationRSS Series Wired Electronic Ballasts
REV 02/16 RSS Series Wired s Specifications Charts RSS Installation Wiring Diagrams RSS Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline
More informationRSS Series Wired Electronic Ballasts
RSS Series Wired s Specifications Charts RSS Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline 120 Volts, 50/60Hz Per Circuit Combined
More informationTCM-4 Data Logger Battery Replacement Instructions
TCM-4 Data Logger Battery Replacement Instructions These instructions apply to the following product: TCM-4 Shallow Water Current Meter These instructions assume that the user has purchased a TCM-4 Battery
More informationConstructing a Newtonian Achromatic Refracting Telescope Dr. Larry Browning, SDSU Physics Department
Constructing a Newtonian Achromatic Refracting Telescope Dr. Larry Browning, SDSU Physics Department These are plans to construct a Newtonian achromatic refractor telescope with a 70-mm aperture and an
More informationCable clips and ties
H 130 Cable clips and ties Cable clip with driven nail white colour O P brown colour 50 25 Type for cable O - round P - flat Nail dimension lenght / diameter H.7001 H.7001-50 H.7001-25 3 mm O 18 / 2 H.7001B
More informationMicroscopic Imaging Research Station (MIRS) Assembly Guide. Version 1.0.0
Microscopic Imaging Research Station (MIRS) Assembly Guide www.adsyscontrols.com Adsys Controls, Inc.2012 Version 1.0.0 I. Assembly of the Adsys Controls MIRS system This document explains the assembly
More informationPrint Head Replacement and Adjustment Guide for the CD Printer Revision C
Print Head Replacement and Adjustment Guide for the CD Printer 110488-001 Revision C Rimage is the trademark of the Rimage Corporation. Perfect Image is a registered trademark of the Rimage Corporation.
More informationTEC APO 200 OWNER S MANUAL
TEC APO 200 OWNER S MANUAL 2005 IMPORTANT - PLEASE READ THIS MANUAL BEFORE USING YOUR TELESCOPE SAFETY WARNINGS Do not look at the sun through the telescope! Viewing the sun through the telescope without
More informationMicroLab Component Holders
$ Mirror and beamsplitter mounts $ Lens holders $ Optical component cell systems $ Prism/tilt table $ Polarizer holders $ Fiber holders Stable optical component holders are critical for aligning any optical
More informationATN IR850 Pro. LONG RANGE 850 mw INFRA-RED ILLUMINATOR. USER S GUIDE (IR850 PRO) REVISION 2 AUGUST, 2017 user s guide
ATN IR850 Pro LONG RANGE 850 mw INFRA-RED ILLUMINATOR USER S GUIDE (IR850 PRO) REVISION 2 AUGUST, 2017 user s guide Important Export Restrictions! Commodities, products, technologies and services contained
More informationClean packaging Class M3.5 Standard packaging Class M5.5. The U type is recommended when changing tubing sizes. Packaging
eries LQ Options Panel mounting nut LQ U Applicable fitting LQN P Applicable fitting LQ LQ Application For LQ For LQ insert bushing Clean packaging M. tandard packaging M. The U type is recommended when
More informationMacro View All in One Scope Description. 2. Features. 3. Package Contents
Macro View All in One Scope 26700-104-00 1. Description Portable system ideal for inline use This self-contained video inspection system is a compact unit, that simplifies quality checks at any stage of
More informationUniversal indicator body for flush mount, black plastic. Part No Flush mount adapter determines round, square or rectangular
Series 61 16mm 22.5mm 21 x 21mm 21 x 27mm IP65 5 250V INDITOR PUSHUTTON E-STOP KEYLOK SELETOR hoose one component from each of the colored sections to assemble a complete switch. For other options or further
More information21AE662M cc Elec Roto-Tiller (2008) Page 1 of 13 Drive System
21AE662M066 250cc Elec Roto-Tiller (2008) Page 1 of 13 Drive System 21AE662M066 250cc Elec Roto-Tiller (2008) Page 2 of 13 Drive System 1 710-0331 1 /P Hex Screw, 3/8-24 x 2.25 Model 662 1 710-0539 1 /P
More informationAirPro Surveyor 2 Manual
AirPro Surveyor 2 Manual AirPro Surveyor Specifications Table of Contents Size 3/8 x 7 1/2 x 4 3/8 Weight 4.6 lbs. 2094 g Dynamic Range 1-1000 ml/min. total flow/constant flow Flow Capacity (8 Hrs.) 1000
More informationPLEASE NOTE: These instructions are intended to be used by a person with average mechanical and electrical skills.
ClassicLEDs is please to present their latest line in Corvette LEDs. This covers the 1975 thru 1979 Corvette. This systems does not include the Corvette... PLEASE NOTE: These instructions are intended
More informationPower Supply, 17-inch
apple imac G5 Power Supply, 17-inch Replacement Instructions Follow the instructions in this sheet carefully. Failure to follow these instructions could damage your equipment and void its warranty. Note:
More informationUNIQUE DESIGN FEATURES
LIGHTING SYSTEM UNIQUE DESIGN FEATURES POWERITE The provides a totally new concept in Underwater Pool/Spa and Aquatic Landscape Lighting Design. Utilizing new technology moulding materials it has been
More informationIn-Sight 7000 Series Vision System. Optional Configurations
In-Sight 7000 Series Vision System Optional Configurations Legal Notices The software described in this document is furnished under license, and may be used or copied only in accordance with the terms
More informationINSTALLATION INSTRUCTIONS
Accessory Application Publication No. INSTALLATION INSTRUCTIONS (DCT TYPE) P/N 08E84-MKC-A00 GL1800D/DA Honda Dealer: Please give a copy of these instructions to your customer. MII 16426 Issue Date January
More informationPL Cold Light Fiber Optical Technology
A New Generation of Cold Light Sources PHOTONIC is one of the leading companies in the optics and opto-electronics industry and has gained a great deal of expertise in the field of light projection and
More informationHARP-NEF Front End Assembly
Science Fibers HARP-NEF Front End Assembly Calib Fibers HARPN Front End Assembly ( w/ Partial Cover Plates ) HARPN Front End Assembly 1 HARP-NEF Front End Assembly Roger Eng December 6, 2007 2 HARP-NEF
More informationMK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial
More informationElecraft W1 SWR/Wattmeter Enclosure by W8FGU
Elecraft W1 SWR/Wattmeter Enclosure by W8FGU The W1 enclosure is made of Lexan, a polycarbonate, which is very strong. It also has a UV blocking coating on one side and was assembled carefully with this
More informationSYSTEM MAINTENANCE MANUAL TACTICAL ENGAGEMENT SIMULATION SYSTEM (TESS) TARGET TRAINING SYSTEM (TTS) OCONUS FIXED LOCATION INSTALLATION
SYSTEM MAINTENANCE MANUAL TACTICAL ENGAGEMENT SIMULATION SYSTEM (TESS) TARGET TRAINING SYSTEM (TTS) OCONUS FIXED LOCATION INSTALLATION INITIAL SETUP Preconditions Coordinate the TTS setup with the training
More informationVacuum Maintenance Manual (EXCERPT Tim Benedict)
1. Position a ladder, scaffold, or work stand, on the right side of Vacuum Skid where the blower motors are installed. 2. Locate the six (6) vacuum hoses connecting the blower motors to the HEPA housings
More informationFor documentation the instrument is available with a trinocular head which permits mounting of a video or digital camera system.
1. Introduction The PriorLux MET upright compound metallurgical microscope is a high quality instrument equipped with high resolution, chromatically corrected optics for excellent image quality in reflected
More informationSeries Single and double-pole rocker switches
Series 10 - Single and double-pole rocker switches to 1 (4) A 0 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches
More informationNavigator II INstallatIoN MaNUal For static and PaN/tIlt configurations
Navigator II Installation MANUAL For Static and Pan/Tilt Configurations Document Number: 432-0001-00-12, rev 100 FLIR Systems, Inc., 2008. All rights reserved worldwide. No parts of this manual, in whole
More informationInstruction Manual. Electrical Management System (EMS) EMS-HW30C & EMS-HW50C
Instruction Manual Electrical Management System (EMS) EMS-HW30C & EMS-HW50C EMS-HW50C EMS-HW30C! CAUTION These instructions are intended to provide assistance with the installation of this product, and
More informationUltra short throw lens installation
Ultra short throw lens installation The ultra short throw lens 0.36 UST GS (P/N: 140-133108-XX) allows you to position your projector as close as possible to your screen or display. Unless otherwise indicated,
More informationSEALED, ILLUMINATED ROCKER SWITCHES
K1/K2 The K series rockers are rugged, high performance sealed switches designed for use under severe conditions found in marine, appliance, heavy equipment and industrial control applications. They are
More information* See following pages for Assembly Breakdowns HMD914 Magnet Base Drill (120v Standard Base) HMD914 Magnet Base Drill
00 HMD Magnet Base Drill (0v Standard Base) 00 HMD Magnet Base Drill (0v Swivel Base) Item Qty Part No. 00 Description (0v standard base) a 0 (0v swivel base) 00 (0v standard base) a 0 0 Drill Housing
More informationSTEP-BY-STEP INSTRUCTIONS FOR BUILDING A MICHELSON INTERFEROMETER. TECHSPEC Optical Cage System
STEP-BY-STEP INSTRUCTIONS FOR BUILDING A MICHELSON INTERFEROMETER TECHSPEC Optical Cage System INTRODUCTION 2 What is a Michelson Interferometer? A Michelson Interferometer is a simple interferometric
More informationNikon Focus Drive Manual
Nikon Focus Drive Manual PRIOR SCIENTIFIC INC., 80 RESERVOIR PARK DRIVE, ROCKLAND, MA 02370-1062 TELEPHONE 781-878-8442 FAX 781-878-8736 WWW.PRIOR.COM Table of Contents Safety Information...1 Unpacking
More informationINSPECTION TOOL. Inspection Video Camera with Color LCD Monitor. EU Environmental Protection. Model: 8802LE,8803LE. Model: 8802LE,8803LE
INSPECTION TOOL Inspection Video Camera with Color LCD Monitor Model: 8802LE,8803LE EU Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle
More information