Electronic scoring systems

Size: px

Start display at page:

Download "Electronic scoring systems"

Cory Evans
5 years ago
Views:

1 Worldwide only 0m laser target with ISSF approval phase, and Installation overview and components Basic configuration of the target for airguns and small bore rifles SIUS AG Im Langhag CH-807 Effretikon Switzerland Phone info@sius.com

2 B-KB- -en 06/8 like this......or like that Standard configuration Target with basic equipment SA9. Option Target with Windows based PC/Laptop (Windows 7 / 8 / 0), USB-LON-Dongle and SIUSLANE software. > see brochure SIUSLANE

B-KB- -en 06/8 Air rifle / air pistol installation 0m and small bore rifle installation 0m Installation overview for 0 lanes The installation is divided into article groups: article group target line

The article groups target line (A) and firing line (C) are needed x per lane.

In addition, country-specific power supply cables are required (device to country specific plug = pos. ).

Description A Article group target line A Target 0m resp. 0, incl. LED Illumination A KL00-T T-Adapter fem/fem/male LTW IP67 A KL00-.0 Cable LTW male fem.

0m (for 0m) B KL00-R Terminating resistor, red, male LTW IP67 C Article group firing line C M9 Monitor TFT 0. (6cm) Touchscreen, incl.

3 B-KB- -en 06/8 Air rifle / air pistol installation 0m and small bore rifle installation 0m Installation overview for 0 lanes The installation is divided into article groups: article group target line (A), article group for cables and power supply (B) and article group firing line (C). The article group for cables and power supply (B) is designed for 0 lanes maximum. The article groups target line (A) and firing line (C) are needed x per lane. The «0 Lane Command Desk» (D) enables the central printing and the display of the connected lanes for the spectators (see SIUS website > Products > «0 Lane Command Desk»). In addition, country-specific power supply cables are required (device to country specific plug = pos. ). A 0 A D B (max m) A A B D Central PC for data acquisition, display and evaluation C B B B C C > see brochure Large installations and components B D C C C Line Line Line 0 D D Pos. Article no. Pcs. Description A Article group target line A Target 0m resp. 0, incl. LED Illumination A KL00-T T-Adapter fem/fem/male LTW IP67 A KL00-.0 Cable LTW male fem.0m B Article group cables and power supply B NTV0 Power supply for 0 lines W with LTW 0V B KL0 Y power cable for NT B KL Cable LTW male fem 0.0m (for 0m) KL Cable LTW male fem 6.0m (for 0m) B KL00-R Terminating resistor, red, male LTW IP67 C Article group firing line C M9 Monitor TFT 0. (6cm) Touchscreen, incl. power supply AAG, USB connection cable for touchscreen and protection cover M9AN00. AA-. Connection cable USB.0,.m (option if monitor is installed separately from CU9) KV0-.-MM Cable extension VGA,.0m (option if monitor is installed separately from CU9) C CU9-CLUB Control unit for clubs, schools etc. (ISSF approval phase and ) CU9-ISSF Control unit with software for ISSF competitions (ISSF approval phase, and ) C KL00-.0 Cable LTW male fem.0m C KL00-T T-Adapter fem/fem/male LTW IP67 D 0-Lane-Command-Desk (option) D TLCD Software 0-Lane-Command-Desk incl. USB-LON-Dongle SNI0-TLCD (blue) D Windows PC with up-to-date hardware (on request or provided directly by customer) D Laserprinter (on request or provided by customer) D Monitor for spectators > TV / beamer in any size (on request or provided directly by customer) Country-specific power supply cable > AA**

4 B-KB- -en 06/8 Target for air rifles / air pistols, The target is designed for all airguns and small bore rifles (see page 6). The high definition infrared detection system guarantees the highest scoring precision. 6 6b 9 6a 6b a 8

B-KB- -en 06/8 Air rifle target front mask 0m Air pistol target front mask 0m Witness paper 7 Pos. Article no. Description Target GV Complete target incl. reinforced front frame for airguns, incl.

5 B-KB- -en 06/8 Air rifle target front mask 0m Air pistol target front mask 0m Witness paper 7 Pos. Article no. Description Target GV Complete target incl. reinforced front frame for airguns, incl. -row LED target illumination Size (WxHxD): 0x60x70mm, weight: 6. kg (without accessory), color: RAL60 pale green Consumption: W, detection surface: 70x70mm. Optional accessory and spare parts GAN00 Target holder for mounting incl. bullet trap for airguns Size (WxHxD): 8x0x6mm, weight:.8 kg (without target). A0 A0 GAN008 a S0D00 ISSF air rifle target front mask, bulls eye Ø 0.mm. ISSF air pistol target front mask, bulls eye Ø 9.mm. Shooting control device (option), ISSF standard Size (WxHxD): 90x8x70mm, weight: kg (without target). Paper tape roll m, black, for ISSF competitions. SHS08 Pedestal for and HS0, variable vertical adjustment > positions. Permits free set-up of the target. The target holder GAN00 () is needed for mounting the target on the pedestal. Size (WxHxD): 77x0x80mm, weight: 7,kg (without target), center of target: 0cm/80cm/0cm. 6 6a 6b ATE0GV ATE0AN00 ATE0AN00 Automated target elevator for. -position lifter for different shooter positions, integrated in LON-network, controlled by control unit / central PC. Mobile or fixed installation possible. Size (WxHxD): 0x60x00mm, weight: kg (without target). Consumption: 0W à V. Caster for target elevator (option) Floor fixation, temporarly, for caster (option), set with pieces 7 AZF06 Witness paper for replacement (option) > manual shot control (to be inserted into the provided slot in the bullet trap) 8 GAN007 Parallax panel (option), set with pieces The use of the parallax panel ensures a parallax free shot evaluation even in case of excessive movements of the shooter (f.ex. change of position). 9 RGL0 Red/green lightsignal, magnetic (option) KI09 Connecting calbe red/green lightsignal, length.m KI00 Cable to dim red/green lightsignal, lenght cm Reference Country-specific power supply cable > AA**

6 B-KB- -en 06/8 Target for small bore rifles, A reinforced front frame for small bore rifle and an enhanced bullet trap makes it possible to use target for 0 meters small bore rifle as well. 8 a a a 7b 7b 6

B-KB- -en 06/8 Small bore rifle target front mask 0m Pos. Article no. Description Target GV Complete target incl. reinforced front frame for airguns, incl.

7 B-KB- -en 06/8 Small bore rifle target front mask 0m Pos. Article no. Description Target GV Complete target incl. reinforced front frame for airguns, incl. -row LED target illumination Size (WxHxD): 0x60x70mm, weight: 6. kg (without accessory), Consumption: W, detection surface: 70x70mm. a a Optional accessory and spare parts GAN00 A0 AN007 A0 Target holder for mounting on mounting plate AN008. The target holder allows to mount the target on the mounting plate. It serves also as backboard of the target and protects it (incl. rubber sheet A0). Size (WxHxD): x6x0mm, weight:. kg (without target). Rubber sheet used for sun protection at the back and for blocking slivers from the bullet trap. Reinforced front frame for small bore rifles (incl. rubber membrane A0). Size (WxHxD): 7x70x6mm, weight:. kg (without target). Rubber membrane used for sun protection in front and interfering shadows. AN008 Mounting plate needed for mounting the target holder () and the reinforced target front frame (). Size (WxHxD): 7x70x90mm, weight:.kg (without target). HS0A0 ISSF small bore rifle target front mask 0m, bulls eye Ø.mm. 6 AN00 Weather protection box Closable, guarantees highest protection from weather influences. Size (WxHxD): 60x6x8mm, weight: 6.kg (without target). 7 7a 7b ATE0GV7 ATE0AN00 ATE0AN00 Automated target elevator for. -position lifter for different shooter positions, integrated in LON-network, controlled by control unit / central PC. Mobile or fixed installation possible. Size (WxHxD): 0x60x00mm, weight: kg (without target). Consumption: 0W à V. Caster for target elevator (option) Floor fixation, temporarly, for caster (option), set with pieces 8 HS0AN008 Bullet catcher connection plate (option) connection between target holder HS0AN00 and bullet catcher HS0AN00 9 ATE0D0 Reinforced front frame for small bore rifles (use on target lifter). Size (WxHxD): 70x8xmm, color: RAL60 pale green 0 HS0AN0 Shatter protection small bore (option), steel sheet, black Reference Country-specific power supply cable > AA** 7

8 B-KB- -en 06/8 SIUS worldwide There are SIUS representatives all around the globe. Find your local SIUS sales partner here: > contact 8

HS10 HYBRIDSCORE. Electronic scoring systems. Installation overview and components. ISSF approval phase 1

HS10 HYBRIDSCORE. Electronic scoring systems. Installation overview and components. ISSF approval phase 1 ISSF approval phase Basic configuration of the target for airguns and small bore rifles Installation overview and components SIUS AG Im Langhag CH-8307 Effretikon Switzerland Phone +4 52 354 60 60 Fax