RP-hermetic 75 FB6 bullet-resistant doors and partitions - E.E. And we reserve the right to effect modifications - Tel: Fax:

Size: px

Start display at page:

Download "RP-hermetic 75 FB6 bullet-resistant doors and partitions - E.E. And we reserve the right to effect modifications - Tel: Fax:"

Claud Jennings
5 years ago
Views:

1 bullet-resistant doors and partitions (+9) -(0) (+9) -(0)

2 General information supplies systems for the metal construction industry. RP Systems are designed to be handled by specialist firms familiar with the generally accepted guidelines and rules of metal construction technology and and glazing and who can be expected to be familiar with the applicable standards, specifications, and industry best practice. For coatings, including pre-treatment, the procedures recommended by the coating industry must be observed. Details regarding possible applications and conditions should be discussed with the coating plant in question before awarding the coating contract. All technical data, advice and recommendations are voluntary services and intended to provide without obligation proposals to planners and fabricators. The user must, however, examine and decide for theirself whether the proposed products fully meet all requirements for his intended application in each individual case. RP products are sold under registered trademark. They also form component parts of tested and approved assemblies. In the case of loss or damage resulting from the use of other products not only does the company deny all liability, but also all testing certificates applicable to the construction lose their validity. With systems from stainless steel please observe that not all accessory parts are made from stainless steel. For the use in highly corrosive environment these components must be protected by applying grease. Special solutions must be carried out with great care since these are not covered by system tests. Equally, workshop made components must be controlled for completeness and function before installation. Every care has been taken to ensure that the data, explanations and illustrations in the document is accurate and whilst the publishers would be grateful to learn of any error, they regret they can accept no responsibility. Nevertheless mistakes cannot be entirely excluded. For the use of the suggestions, drawings and data we cannot take any responsibility or liability. Please note also our sales and delivery terms. Because of the constraints printing technology and/or graphics illustrations may not always correspond to the stated scales and norm sizes. reserves the right to undertake technical modifications without prior notice. The publication of new documentation renders invalid all previous versions. Edition (+9) -(0) (+9) -(0)

3 Advantages: - profiles with reinforcement inside - no additional reinforcement inside for the lock and the miter corners - only some additional reinforments on site necessary with usual steel profiles - resistant against Kalaschnikow flak - burglary-resistant fittings useable - shatterproof glass applicable 1.1 Overview test category bullet-resistant - windows, doors, partitions EN 15 / 15 - glazing EN 106 category type of weapon rifle hand-gun hand-gun hand-gun rifle. long Rifle 9 mm Luger.57 Mag.. Rem. Mag. 5,56 x 5 rifle 7,6 x 51 soft core rifle 7,6 x 51 hard core bore Energy of muzzle(j) V target (m/s) (+9) -(0) (+9) -(0)

4 Test report 1. (+9) -(0) (+9) -(0)

5 Test report 1. (+9) -(0) (+9) -(0)

6 .1 System cuts single-leaf door and partition z.b. xxx1xx reinforcement on site partitions connections to buildings have to be carried out according to resistance demand and weight of the construction reinforcement on site 08/ 07 (+9) -(0) (+9) -(0)

7 .1 System cuts double-leaf door opening inwards z.b. xxx1xx reinforcement on site opening outwards z.b. xxx1xx S connections to buildings have to be carried out according to resistance demand and weight of the construction reinforcement on site S 08/ 07 (+9) -(0) (+9) -(0)

8 .1 Main profiles RP 7600 RP , ,8 1, RP 7616 RP ,8 1, RP 7618 RP RP ,8 1,8 75 (+9) -(0) (+9) -(0)

9 .1 Articles overview Main profiles art.-no. description additional info profile charac. values 1) PU Z Z Z Z Z Y Y Y Y Y RP 7600 RP 7601 RP 7610 RP 7618 RP 7615 frame profile t = 1,8 mm pregalvanized frame profile t = 1,8 mm pregalvanized leaf / frame profile t = 1,8 mm pregalvanized leaf / frame profile t = 1,8 mm pregalvanized bottom profile t = 1,8 mm pregalvanized A = 9,1 cm O = 0,57 m /m G = 7,9 kg/m I y = 56,5 cm W y = 1,6 cm I z = 6,06 cm W = 9,0 cm z A = 9,1 cm O = 0,57 m /m G = 7,9 kg/m I y = 6,0 cm W y = 15,60 cm I z = 6,06 cm W = 9,0 cm z O = 0,78 m /m I y = 59,80 cm W y = 1,78 cm I z = 55,87 cm W = 10,80 cm z O = 0,78 m /m I y = 66,9 cm W y = 16, cm I z = 55,87 cm W = 10,80 cm z A = 9,68 cm O = 0,7 m /m G = 7,60 kg/m I y = 5,1 cm W y = 1,08 cm I z = 9,78 cm W = 8,95 cm z A = section surface, O = outside circumference, G = weight, I = moment of surface inertia, W = resistance momentum 1) Z Z Y Y RP 761 RP 7616 frame profile t = 1,8 mm pregalvanized sash profile t = 1,8 mm pregalvanized A = 9,7 cm O = 0,9 m /m G = 7,8 kg/m I y = 59,06 cm W y = 1,1 cm I z =, cm W = 9,5 cm z A = 9,61 cm O = 0,68 m /m G = 7,55 kg/m I y = 6, cm W y = 1,60 cm I z = 51,70 cm W = 10,88 cm z (+9) -(0) (+9) -(0)

10 . Articles overview Main profiles pre-fabricated art.-no. description additional info profile charac. values 1) PU lock profile pre-fabricated for single locking DIN right external opening lock art.no lock profile pre-fabricated for single locking DIN left external opening lock art.no lock profile pre-fabricated for single locking DIN right internal opening lock art.no O = 0,78 m /m O = 0,78 m /m O = 0,78 m /m 000 mm 000 mm 000 mm A = section surface, O = outside circumference, G = weight 1) lock profile pre-fabricated for single locking DIN left internal opening lock art.no O = 0,78 m /m 000 mm lock profile pre-fabricated for multiple locking DIN right external opening lock art.no O = 0,78 m /m 000 mm lock profile pre-fabricated for multiple locking DIN left external opening lock art.no O = 0,78 m /m 000 mm lock profile pre-fabricated for multiple locking DIN right internal opening lock art.no lock profile pre-fabricated for multiple locking DIN left internal opening lock art.no O = 0,78 m /m O = 0,78 m /m 000 mm 000 mm (+9) -(0) (+9) -(0)

11 . Articles overview Glazing beads steel art.-no. RP 168 RP 1591 RP 167 RP 1606 RP 1668 RP 1657 RP 1819 description additional info glazing bead 8,5 mm glazing bead 1 mm glazing bead 18 mm glazing bead mm glazing bead 8 mm glazing bead mm glazing bead mm profile charac. values 1) A = 1,00 cm O = 0,071 m /m G = 0,78 kg/m A = 1,11 cm O = 0,079 m /m G = 0,87 kg/m A = 1,6 cm O = 0,089 m /m G = 0,99 kg/m A = 1,1 cm O = 0,099 m /m G = 1,11 kg/m A = 1,56 cm O = 0,109 m /m G = 1, kg/m A = 1,71 cm O = 0,119 m /m G = 1, kg/m A =,01 cm O = 0,19 m /m G = 1,58 kg/m PU A = section surface, O = outside circumference, G = weight 1) (+9) -(0) (+9) -(0)

12 . Articles overview Seals art.-no. description additional info PU glazing seal mm X glazing seal mm, self-adhesive X glazing seal 5 mm, self-adhesive glazing seal mm 0 10 glazing seal mm glazing seal 5 mm glazing seal 6 mm glazing seal 7 mm 010 rebate seal (+9) -(0) (+9) -(0)

13 .5 Articles overview Automatic floor seals art.-no. description additional info PU automatic floor seal including accessories and fixation material primary leaf - available length 67 mm (for leaf rebate dimension mm) primary leaf - available length 76 mm ( for leaf rebate dimension mm) primary leaf - available length 887 mm ( for leaf rebate dimension mm) 00 0 primary leaf - available length 101 mm ( for leaf rebate dimension mm) 00 0 primary leaf - available length 117 mm ( for leaf rebate dimension mm) 00 0 primary leaf - available length 16 mm ( for leaf rebate dimension mm) 00 5 primary leaf - available length 187 mm ( for leaf rebate dimension mm) primary leaf - special dimension on request secondary leaf - available length 67 mm (for leaf rebate dimension mm) secondary leaf - available length 76 mm (for leaf rebate dimension mm) secondary leaf - available length 887 mm (for leaf rebate dimension mm) secondary leaf - available length 101 mm (for leaf rebate dimension mm) secondary leaf - available length 117 mm (for leaf rebate dimension mm) secondary leaf - available length 16 mm (for leaf rebate dimension mm) secondary leaf - available length 187 mm (for leaf rebate dimension mm) secondary leaf - special dimension on request 08/ 07 (+9) -(0) (+9) -(0)

14 .5 Articles overview Automatic floor seals art.-no. description additional info PU automatic floor seal including accessories and fixation material replacement seal for automatic floor seal 1m 0 0 brush seal 08/ 07 (+9) -(0) (+9) -(0)

15 .6 Articles overview Fittings art.-no. description additional info PU multiple locking with hook-swing-bolt, 9 mm backset, useable for DIN left and right latch bolt 1 mm proceeding, 9 mm distance, 9 mm square, PC pre-fabricated, with lever handle face plate stainless steel brushed 1 00 lock plate for main lock of the multiple locking art.-no stainless steel brushed need: per locking 1 00 lock plate for multiple locking with hook-swing-bolt art.-no stainless steel brusched need: pieces per locking mortise dead lock 0 mm backset, 9 mm distance, 9 mm square, PC pre-fabricated, flush bolt and latch bolt justified, with lever handle face plate stainless steel brushed 1 00 DIN right DIN left lock plate for mortise dead lock stainless steel brushed secondary leaf set flush bolt DIN right/left, backset 0 component parts: lock plate floor bush espagnolette lock flush bolt 10 espagnolette rod top 0 espagnolette rod bottom lens head countersunk screw M5x universal rivet nut M5 08/ 07 (+9) -(0) (+9) -(0)

16 .6 Articles overview Fittings art.-no. description additional info PU Additional set, rod lock bottom, back set 0 component parts: lock plate latch push cam cranked espagnolette rod rod guide for espagnolette rod lens head countersunk screw M5x universal rivet nut M5 NOT IN COMBINATION WITH MULTIPLE LOCKING 1 010! 1 10 cover-rosette ZA PC, oval, x 7 mm invisible screwing stainless steel brushed ornament ring, diameter 5 mm with PC cutout stainless steel brushed 8 90 weld-on hinge, steel, threepart in special model: hardened for leaf weight up to max. 50 kg hinges per leaf! 08/ 07 (+9) -(0) (+9) -(0)

Single action door patch fittings

Single action door patch fittings The flexible system for all installation situations. CONTENTS Technical details - 5 Materials and surface finishes Product information Patch fittings / none rebated frame