Modeling a CPU case. Lesson 5. This tutorial illustrates how to create the external case of a Central Processing Unit using the following commands.
|
|
- Bernice Flowers
- 5 years ago
- Views:
Transcription
1 Modeling a CPU case Lesson 5 Modeling a CPU case This tutorial illustrates how to create the external case of a Central Processing Unit using the following commands. NURBS curves. Pipe. NURBS surface editing. Trim. Edge extract. Snap to Point / Snap in 3D. Coons. Learning solidthinking 1
2 Lesson 5 You will start modeling by drawing the base curves. Building the case 1) If you are already working with solidthinking, choose the New command from the File main menu and save the scene you were working on. Otherwise, you must first run solidthinking. 2) Choose the default layout option from the Layouts panel (choose View 4 Layouts). 2 Learning solidthinking
3 Modeling a CPU case 3) Select the NURBS curve tool and create a curve in the Front view for the frontal profile of the workstation. Insert 0,0,0 as default Local axes origin (use the image below for reference guide). Try to keep as few control points as you possibly can. For your convenience, we provide herewith points coordinates: #1(-5, 0, 0); #2(-5, 0, 3); #3(-4.4, 0, 3); #4(-4.4, 0, 4); #5(-4.4, 0, 13); #6(-3, 0, 14); #7(-2, 0, 14). 4) Select the NURBS curve tool and create a curve in the Top view for the upper profile of the workstation. Insert 0,0,0 as default Local axes origin and use the image below as reference guide. Just as before, try to keep as few control points as you possibly can. Learning solidthinking 3
4 Lesson 5 Points coordinates are: #1(-5, 12, 0); #2(-5, 11, 0); #3(-5, 0, 0); #4(0, -2, 0); #5(5, 0, 0); #6(5, 11, 0); #7(5, 12, 0). The curves you have created should be similar to those in the below figure. 4 Learning solidthinking
5 Modeling a CPU case 5) Click the Pipe icon. Then, click the front profile curve, followed by the top profile curve. Note: if the surface you have just attained is slightly different from the one shown in the figure, you just need to act on the two curves that have generated the surface (the Construction Curves). Just click the Edit Mode icon in the Application Toolbar and drag the curves points with the mouse: solidthinking will adjust the surface accordingly. 6) To create the front part of the workstation, select now the surface and click the NURBS surface editing icon. An alert panel warns you: The selected surface is part of a Construction Tree. In order to edit with this Modeling Tool, the surface needs not to be a part of the Construction Tree. Do you want the surface to be set as hidden and a copy to be created for editing? Click Yes to confirm your choice. Note: When you apply the NURBS Surface Editing action, the Construction Tree is broken. The original parametric surface is hidden from the 3D views but still displayed in the browser. The newly created NURBS surface is NOT linked in any way to the original parametric one. Learning solidthinking 5
6 Lesson 5 Thus, modifying the shape of the original parametric surface will NOT cause the NURBS surface to change its shape accordingly. 7) Now click the Edit Mode icon in the Application Toolbar. 8) Hold down the mouse button and drag in the view to select any point included in a selection box. You can keep the. Ctrl key pressed to add any ulterior points to the first selection. 6 Learning solidthinking
7 Modeling a CPU case Note: you will probably make the selection of points easier by simply orbiting the camera in the Perspective View. 9) Disable X and Y and click the Translation tool to move the points downward. Once moved, deselect all of them and go on moving only those needed to get your final shape. Note: getting a surface identical to the one below is unnecessary; the issue here is understanding how the command works. Let s now move to the upper side. This area is not flat as it may appear, but rather puffed up. 10) Select the points, switch to Edit Mode and Translate the points onto the Z axis. You will so get a lightly rounded surface. Learning solidthinking 7
8 Lesson 5 Here is the surface viewed in Shade mode (Perspective window) after the translation of the points upwards. You can now distinguish its actual shape. 8 Learning solidthinking
9 Modeling a CPU case Creating a slot Let s now see how to create a simple slot. 1) Enable now X and Y dragging. 2) Click the Front View and then click the NURBS curve icon. Draw a curve as illustrated below: Points coordinates are: #1(-1, 0, 2); #2(-1, 0, 1); #3(-1, 0, 0); #4(0, 0, 0); #5(1, 0, 0); #6(1, 0, 1); #7(1, 0, 2). This curve will now be used to trim the surface. 3) Click the Trim icon and, first, select the curve to cast, and then the surface. The outcome should be as depicted in the following figure Learning solidthinking 9
10 Lesson 5 Note: The Trim modeling tool allows you to determine the area of the surface you want to keep. In the Modeling Tool panel, just switch on the chosen radio button to specify if you want to Keep exterior or to Trim exterior. 10 Learning solidthinking
11 Modeling a CPU case You now need to close the trim hole. 4) With the trimmed surface selected, use the Copy and Paste command to create a copy of the object. Note: the World Browser will emphasize the duplication of the object by adding a new object to the list. 5) Select again the original trimmed surface (not the copy) in the World Browser and, in the Modeling Tool panel, enable Trim exterior in the Loop exterior section to highlight the inner portion. Learning solidthinking 11
12 Lesson 5 Closing up the case To create the lid, we must extract the necessary curves. 1) Click the Edge extract icon and click the left border to extract it. Do the same with the right one. You will so obtain two separate curves. The figure below shows you the edges to be extracted. 12 Learning solidthinking
13 Modeling a CPU case Note: You will find it easier executing Edge extract in the Perspective view. 2) Do the same to extract the edge relative to the frontal portion. Refer to the below image. You now have three profiles. You are only missing the fourth and then you will build the surface that will close up the cpu case. 3) Select Edit 4 Active Snap 4 Point and Edit 4 Active Snap 4Snap in 3D. The active snaps will allow you to create a precise curve. Learning solidthinking 13
14 Lesson 5 4) Click the Top View and then click the NURBS curve icon to create the fourth and last curve. Confirm the default Local axes origin (0,0,0) and click the two points indicated in the figure below. 5) We will now use the Coons surface creation tool, which creates a surface blended between four boundary curves. Click the Coons icon and then pick the four curves (1, 2, 3, 4) which define the perimeter of the surface to be created making sure to select them consecutively Learning solidthinking
15 Modeling a CPU case Once you have completed this last surface, your CPU case is ready. We encourage you to repeat it a few more times or, at least, until you will feel more confortable with the concepts and commands explained up this point. Learning solidthinking 15
16 Lesson 5 16 Learning solidthinking
Designing a Chair. Lesson 6
Designing a Chair Lesson 6 Designing a Chair This lesson will show you how to design a chair by using the Curves Network modeling tool in a few steps. We will focus your attention on the following modeling
More informationsolidthinking User Interface
Lesson 1 solidthinking User Interface This lesson introduces you to the solidthinking interface. The functions described represent the tools necessary for effectively managing the modeling of a project.
More informationHow to Create a Fountain Pen
How to Create a Fountain Pen Lesson 4 How to Create a Fountain Pen This lesson will guide you in building a fountain pen. You will use the following tools: NURBS curves. Extrusion. Mirror. Trim. Blend
More informationTextures. Textures. Lesson 9
Lesson 9 Textures In this lesson we are going to analyze the use of textures. You will look at two specific examples of material, for which the use of textures is essential to obtain a correct result:
More informationDesigning a Chair. Lesson 6
Lesson 6 Designing a Chair This lesson illustrates how to design a chair using the Curves Network modeling tool. The following modeling tools will be covered: Curves Network. Skin. Intersect. Trim. Mirror.
More informationsolidthinking Environment...1 Modeling Views...5 Console...13 Selecting Objects...15 Working Modes...19 World Browser...25 Construction Tree...
Copyright 1993-2009 solidthinking, Inc. All rights reserved. solidthinking and renderthinking are trademarks of solidthinking, Inc. All other trademarks or service marks are the property of their respective
More informationuser manual vol. 2: modeling
user manual vol. 2: modeling An Company solidthinking Release 8.0 User Manual Modeling - Volume 2 1993-2009 solidthinking Inc. Part N. 80-25041-10301 Copyright 1993-2009 solidthinking, Inc. All rights
More informationTUTORIAL 07: RHINO STEREOTOMIC MODELING PART 2. By Jeremy L Roh, Professor of Digital Methods I UNC Charlotte s School of Architecture
TUTORIAL 07: RHINO STEREOTOMIC MODELING PART 2 By Jeremy L Roh, Professor of Digital Methods I UNC Charlotte s School of Architecture This tutorial will explore the Stereotomic Modeling Methods within
More informationThe Villa Savoye ( ), Poisy, Paris.
Learning SketchUp Villa Savoye This tutorial will involve modeling the Villa Savoye by Le Corbusier Files needed to complete this tutorial are available in Mr. Cochran s Web Site The Villa Savoye (1929-1931),
More informationCreate a Rubber Duck. This tutorial shows you how to. Create simple surfaces. Rebuild a surface. Edit surface control points. Draw and project curves
Page 1 of 24 Create a Rubber Duck This exercise focuses on the free form, squishy aspect. Unlike the flashlight model, the exact size and placement of the objects is not critical. The overall form is the
More informationTutorial - Steering Wheel
Tutorial - Steering Wheel (written by Jacob Tremmel, Student at Altair) This tutorial is about modeling (CAD) and rendering of a Steering Wheel with Altair s solidthinking Evolve 9.0. 1 Modeling 1. At
More informationMaya Lesson 3 Temple Base & Columns
Maya Lesson 3 Temple Base & Columns Make a new Folder inside your Computer Animation Folder and name it: Temple Save using Save As, and select Incremental Save, with 5 Saves. Name: Lesson3Temple YourName.ma
More informationModeling a Gear Standard Tools, Surface Tools Solid Tool View, Trackball, Show-Hide Snaps Window 1-1
Modeling a Gear This tutorial describes how to create a toothed gear. It combines using wireframe, solid, and surface modeling together to create a part. The model was created in standard units. To begin,
More informationSketchUp. SketchUp. Google SketchUp. Using SketchUp. The Tool Set
Google Google is a 3D Modelling program which specialises in making computer generated representations of real-world objects, especially architectural, mechanical and building components, such as windows,
More informationExercise Guide. Published: August MecSoft Corpotation
VisualCAD Exercise Guide Published: August 2018 MecSoft Corpotation Copyright 1998-2018 VisualCAD 2018 Exercise Guide by Mecsoft Corporation User Notes: Contents 2 Table of Contents About this Guide 4
More informationAutoCAD 2009 Tutorial
AutoCAD 2009 Tutorial Second Level: 3D Modeling Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD 2009
More informationCharacter Modeling COPYRIGHTED MATERIAL
38 Character Modeling p a r t _ 1 COPYRIGHTED MATERIAL 39 Character Modeling Character Modeling 40 1Subdivision & Polygon Modeling Many of Maya's features have seen great improvements in recent updates
More informationLesson 14 Blends. For Resources go to > click on the Creo Parametric Book cover
Lesson 14 Blends Figure 14.1 Cap OBJECTIVES Create a Parallel Blend feature Use the Shell Tool Create a Swept Blend REFERENCES AND RESOURCES For Resources go to www.cad-resources.com > click on the Creo
More informationSpring 2011 Workshop ESSENTIALS OF 3D MODELING IN RHINOCEROS February 10 th 2011 S.R. Crown Hall Lower Core Computer Lab
[1] Open Rhinoceros. PART 1 INTRODUCTION [4] Click and hold on the Boundary Lines in where they form a crossing and Drag from TOP RIGHT to BOTTOM LEFT to enable only the PERSPECTIVE VIEW. [2] When the
More information3 AXIS STANDARD CAD. BobCAD-CAM Version 28 Training Workbook 3 Axis Standard CAD
3 AXIS STANDARD CAD This tutorial explains how to create the CAD model for the Mill 3 Axis Standard demonstration file. The design process includes using the Shape Library and other wireframe functions
More informationAdvance Design. Tutorial
TUTORIAL 2018 Advance Design Tutorial Table of Contents About this tutorial... 1 How to use this guide... 3 Lesson 1: Preparing and organizing your model... 4 Step 1: Start Advance Design... 5 Step 2:
More informationFeature-based CAM software for mills, multi-tasking lathes and wire EDM. Getting Started
Feature-based CAM software for mills, multi-tasking lathes and wire EDM www.featurecam.com Getting Started FeatureCAM 2015 R3 Getting Started FeatureCAM Copyright 1995-2015 Delcam Ltd. All rights reserved.
More informationLesson 5 Solid Modeling - Constructive Solid Geometry
AutoCAD 2000i Tutorial 5-1 Lesson 5 Solid Modeling - Constructive Solid Geometry Understand the Constructive Solid Geometry Concept. Create a Binary Tree. Understand the basic Boolean Operations. Create
More informationV-BOX Cloud Configuration
V-BOX Cloud Configuration Website: http://www.we-con.com.cn/en Technical Support: support@we-con.com.cn Skype: fcwkkj Phone: 86-591-87868869 QQ: 1043098682 Technical forum: http://wecon.freeforums.net/
More information3D Design with 123D Design
3D Design with 123D Design Introduction: 3D Design involves thinking and creating in 3 dimensions. x, y and z axis Working with 123D Design 123D Design is a 3D design software package from Autodesk. A
More informationUser Guide. for. JewelCAD Professional Version 2.0
User Guide Page 1 of 121 User Guide for JewelCAD Professional Version 2.0-1 - User Guide Page 2 of 121 Table of Content 1. Introduction... 7 1.1. Purpose of this document... 7 2. Launch JewelCAD Professional
More informationChapter 15: Penguin - Point Editing and Blending
This tutorial demonstrates point-editing techniques including moving and scaling control points and adding knots to surfaces to increase control. In addition, you will use blends to create smooth transitions
More informationCATIA V5 Parametric Surface Modeling
CATIA V5 Parametric Surface Modeling Version 5 Release 16 A- 1 Toolbars in A B A. Wireframe: Create 3D curves / lines/ points/ plane B. Surfaces: Create surfaces C. Operations: Join surfaces, Split & Trim
More informationLesson 17 Shell, Reorder, and Insert Mode
Lesson 17 Shell, Reorder, and Insert Mode Figure 17.1 Oil Sink OBJECTIVES Master the use of the Shell Tool Reorder features Insert a feature at a specific point in the design order Create a Hole Pattern
More informationHow to Use the Explore Service Area Tool: By Geography.
How to Use the Explore Service Area Tool: By Geography How to Use the Explore Service Area Tool: By Geography 2 Acronyms Used in This Lesson Acronym UDS ZCTA What It Stands For Uniform Data System ZIP
More informationVERO UK TRAINING MATERIAL
VERO UK TRAINING MATERIAL VISI Basic 2-D Modelling course (V-16) VISI Modelling 2D Design Introduction Many component designs follow a similar route, beginning with a 2D design, part modelled using solids
More informationPublication Number spse01695
XpresRoute (tubing) Publication Number spse01695 XpresRoute (tubing) Publication Number spse01695 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens
More informationMaya 2014 NURBS Modeling Tutorial Airship
Maya 2014 NURBS Modeling Tutorial Airship Airships have captured human imagination for centuries and are featured prominently in books, film and video games. As an introduction to modeling with NURBS (non
More informationGetting Started. The main tasks described in this section are the following:
Getting Started Getting Started Before getting into the detailed instructions for using Interactive Drafting workbench, the following tutorial aims at giving you a feel of what you can do with the product.
More informationParametric Modeling. With. Autodesk Inventor. Randy H. Shih. Oregon Institute of Technology SDC PUBLICATIONS
Parametric Modeling With Autodesk Inventor R10 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com 2-1 Chapter 2 Parametric
More informationLesson 14 Blends. For Resources go to > click on the Creo Parametric 2.0 Book cover
Lesson 14 Blends Figure 14.1 Cap OBJECTIVES Create a Parallel Blend feature Use the Shell Tool Create a Hole Pattern REFERENCES AND RESOURCES For Resources go to www.cad-resources.com > click on the Creo
More informationTRAINING SESSION Q3 2016
There are 6 main topics in this training session which is focusing on 3D Import and 2D Drawing Tips and Tricks in IRONCAD. Content 3D modeling kernels... 2 3D Import... 3 Direct Face Modeling... 5 Unfold
More informationLesson 1 Parametric Modeling Fundamentals
1-1 Lesson 1 Parametric Modeling Fundamentals Create Simple Parametric Models. Understand the Basic Parametric Modeling Process. Create and Profile Rough Sketches. Understand the "Shape before size" approach.
More informationEXPERIMENT NO: NAME OF EXPERIMENT: -01 2D & 3D CAD modelling methodology using package AutoCAD.
SHRI SHIVAJI EDUCATION SOCIETY, AMRAVATI S, COLLEGE OF ENGINEERING & TECHNOLOGY, AKOLA Babhulgaon (JH) N.H.No.6, Akola-444104 DEPARTMENT OF MECHANICAL ENGINEERING COMPUTER SOFTWARE APPLICATIONS -I LAB.
More informationTrimmed Surfaces Maya 2013
2000-2013 Michael O'Rourke Trimmed Surfaces Maya 2013 Concepts Trimming works only on patches (in Maya, this means NURBS patches) Does not work with polygonal models A trim can look similar to a Boolean
More informationRevit Architecture 2015 Basics
Revit Architecture 2015 Basics From the Ground Up Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationGraphWorX64 Productivity Tips
Description: Overview of the most important productivity tools in GraphWorX64 General Requirement: Basic knowledge of GraphWorX64. Introduction GraphWorX64 has a very powerful development environment in
More informationThe Rectangular Problem
C h a p t e r 2 The Rectangular Problem In this chapter, you will cover the following to World Class standards: The tools for simple 2D Computer Aided Drafting (CAD) The Command Line and the Tray The Line
More informationIntroduction And Overview ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary
Introduction And Overview 2006 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary The ANSYS Workbench represents more than a general purpose engineering tool. It provides a highly integrated engineering
More informationClick the buttons in the interactive below to learn how to navigate the Access window.
Access 2010 Getting Started in Access Introduction Page 1 Whenever you're learning a new program, it's important to familiarize yourself with the program window and the tools within it. Working with Access
More informationCreate the Through Curves surface
Create the Through Curves surface 1. Open ffm4_mc_fender. 2. Select all three strings, and then on the Analyze Shape toolbar, click Show End Points. Notice there are two curves in the strings on the left
More informationSolidWorks Implementation Guides. User Interface
SolidWorks Implementation Guides User Interface Since most 2D CAD and SolidWorks are applications in the Microsoft Windows environment, tool buttons, toolbars, and the general appearance of the windows
More informationGrade: 7 Lesson name: Creating a School News Letter Microsoft Word 2007
Grade: 7 Lesson name: Creating a School News Letter Microsoft Word 2007 1. Open Microsoft Word 2007. Word will start up as a blank document. 2. Change the margins by clicking the Page Layout tab and clicking
More informationSolidworks 2006 Surface-modeling
Solidworks 2006 Surface-modeling (Tutorial 2-Mouse) Surface-modeling Solid-modeling A- 1 Assembly Design Design with a Master Model Surface-modeling Tutorial 2A Import 2D outline drawing into Solidworks2006
More informationWord 2007 Tables Objectives
Word 2007 Tables In this lesson you will learn how to create, modify and format tables. You will also learn to use the AutoFormat table option and to sort table rows. Objectives Create a table Modify a
More informationTutorial 4: Texture Mapping Techniques
Tutorial 4: Texture Mapping Techniques Completion time 40 minutes In the previous tutorial we learned how to create materials, and how to assign texture maps to those materials. In this tutorial we will
More informationBasic Modeling 1 Tekla Structures 12.0 Basic Training September 19, 2006
Tekla Structures 12.0 Basic Training September 19, 2006 Copyright 2006 Tekla Corporation Contents Contents 3 1 5 1.1 Start Tekla Structures 6 1.2 Create a New Model BasicModel1 7 1.3 Create Grids 10 1.4
More informationTower Drawing. Learning how to combine shapes and lines
Tower Drawing Learning how to combine shapes and lines 1) Go to Layout > Page Background. In the Options menu choose Solid and Ghost Green for a background color. This changes your workspace background
More informationPublication Number spse01695
XpresRoute (tubing) Publication Number spse01695 XpresRoute (tubing) Publication Number spse01695 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens
More informationSketchUp Starting Up The first thing you must do is select a template.
SketchUp Starting Up The first thing you must do is select a template. While there are many different ones to choose from the only real difference in them is that some have a coloured floor and a horizon
More informationProducing Project Deliverables: Creating a Plan Set
Practice Workbook This workbook is designed for use in Live instructor-led training and for OnDemand selfstudy. The explanations and demonstrations are provided by the instructor in the classroom, or in
More informationAdobe Illustrator CS5 Part 2: Vector Graphic Effects
CALIFORNIA STATE UNIVERSITY, LOS ANGELES INFORMATION TECHNOLOGY SERVICES Adobe Illustrator CS5 Part 2: Vector Graphic Effects Summer 2011, Version 1.0 Table of Contents Introduction...2 Downloading the
More informationGoogle SketchUp. and SketchUp Pro 7. The book you need to succeed! CD-ROM Included! Kelly L. Murdock. Master SketchUp Pro 7 s tools and features
CD-ROM Included! Free version of Google SketchUp 7 Trial version of Google SketchUp Pro 7 Chapter example files from the book Kelly L. Murdock Google SketchUp and SketchUp Pro 7 Master SketchUp Pro 7 s
More informationCreating or enlarging a hole in the center of a kaleidoscope (Paint Shop Pro)
TM Kaleidoscope Kreator Tutorial Series Creating or enlarging a hole in the center of a kaleidoscope (Paint Shop Pro) There may be times when you want to create (or enlarge) a hole in the center of a kaleidoscope:
More information2 Working with Selections
2 Working with Selections Learning how to select areas of an image is of primary importance you must first select what you want to affect. Once you ve made a selection, only the area within the selection
More informationSolid Modeling: Part 1
Solid Modeling: Part 1 Basics of Revolving, Extruding, and Boolean Operations Revolving Exercise: Stepped Shaft Start AutoCAD and use the solid.dwt template file to create a new drawing. Create the top
More informationHow to...create a Video VBOX Gauge in Inkscape. So you want to create your own gauge? How about a transparent background for those text elements?
BASIC GAUGE CREATION The Video VBox setup software is capable of using many different image formats for gauge backgrounds, static images, or logos, including Bitmaps, JPEGs, or PNG s. When the software
More informationParametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC
Parametric Modeling with Autodesk Inventor 2009 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. 2-1 Chapter
More informationParametric Modeling with. Autodesk Fusion 360. First Edition. Randy H. Shih SDC. Better Textbooks. Lower Prices.
Parametric Modeling with Autodesk Fusion 360 First Edition Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
More informationAutodesk Inventor Tips & Tricks Placing Features On
1 Autodesk Inventor Tips & Tricks Placing Features On Cylindrical Shapes The adoption of parametric, feature based solid modeling will present many challenges to the new user as they are confronted for
More information2. Drag and drop the cloud image onto your desktop to be used later in the tutorial.
Do the following tutorial. You will use the Earth Map image and Photo image below. 1. Copy the Earth Map image and paste it into photoshop. Open photoshop. Go to menu/file/new. Name it lastname-earth.
More information1 In the Mini Window Editor, double-click phase 1 (GF-Wall-External) to make it current:
1 This Quick Start tutorial introduces you to the basics of creating an intelligent drawing using the BIM components supplied with MicroGDS 2010. Here we demonstrate how to construct the external walls
More informationSETTING UP A. chapter
1-4283-1960-3_03_Rev2.qxd 5/18/07 8:24 PM Page 1 chapter 3 SETTING UP A DOCUMENT 1. Create a new document. 2. Create master pages. 3. Apply master pages to document pages. 4. Place text and thread text.
More informationAn Approach to Content Creation for Trainz
An Approach to Content Creation for Trainz Paul Hobbs Part 6 GMax Basics (Updates and sample files available from http://www.44090digitalmodels.de) Page 1 of 18 Version 3 Index Foreward... 3 The Interface...
More informationNURBS Sailboat on Ocean (Modeling/Animation)
Course: 3D Design Title: NURBS Sailboat Blender: Version 2.6X Level: Beginning Author; Neal Hirsig (nhirsig@tufts.edu) (April 2013) NURBS Sailboat on Ocean (Modeling/Animation) The objective of this PDF
More information3D Studio Max Lesson 1.1: A Basic Overview of 3DSMax's Main Tool Bar
3D Studio Max Lesson 1.1: A Basic Overview of 3DSMax's Main Tool Bar Introduction In this tutorial, we'll just be taking a look at parts of the environment of 3D Studio Max version 4.26, and helping you
More informationMicrosoft Visio 2010
Microsoft Visio 2010 Bryton Burling Table of Contents Opening Microsoft Visio 2010... 2 Getting Started... 3 Creating a Conceptual Web Site Diagram... 3 Analyzing the Shapes Toolbar... 3 Adding a Home
More informationIntroduction to SolidWorks Basics Materials Tech. Wood
Introduction to SolidWorks Basics Materials Tech. Wood Table of Contents Table of Contents... 1 Book End... 2 Introduction... 2 Learning Intentions... 2 Modelling the Base... 3 Modelling the Front... 10
More informationFreeStyle Shaper & Optimizer
FreeStyle Shaper & Optimizer Preface What's New Getting Started Basic Tasks Advanced Tasks Workbench Description Customizing Glossary Index Dassault Systèmes 1994-99. All rights reserved. Preface CATIA
More informationARCHITECTURE & GAMES. A is for Architect Simple Mass Modeling FORM & SPACE. Industry Careers Framework. Applied. Getting Started.
A is for Architect Simple Mass Modeling One of the first introductions to form and space usually comes at a very early age. As an infant, you might have played with building blocks to help hone your motor
More informationFLATTERY TO PRINT TUTORIAL
FLATTERY TO PRINT TUTORIAL 1. With building shell completely unfolded and flat, select all pieces to print 2. Move flattened pattern to unoccupied area of model space 3. Turn off perspective: Camera >
More informationExercise 1a: Interacting With HyperMesh
Exercise 1a: Interacting With HyperMesh This exercise will cover many of the basic concepts that are central to many of the features in HyperMesh. By the end of this exercise you should be familiar with
More informationDrawing Tips ME170. Instructor: Mike Philpott (
Drawing Tips Instructor: Mike Philpott (email: mphilpot@illinois.edu) Configuration of Creo Prepare Creo for drawing creation. - Open Creo Parametric 3.0 from the Start Menu. - Set your working directory.
More informationIn this lesson, you ll learn how to:
LESSON 5: ADVANCED DRAWING TECHNIQUES OBJECTIVES In this lesson, you ll learn how to: apply gradient fills modify graphics by smoothing, straightening, and optimizing understand the difference between
More informationModule 1: Basics of Solids Modeling with SolidWorks
Module 1: Basics of Solids Modeling with SolidWorks Introduction SolidWorks is the state of the art in computer-aided design (CAD). SolidWorks represents an object in a virtual environment just as it exists
More informationDraw Guide. Chapter 7 Working with 3D Objects
Draw Guide Chapter 7 Working with 3D Objects Copyright This document is Copyright 2011 2014 by the LibreOffice Documentation Team. Contributors are listed below. You may distribute or modify it under the
More information4) Finish the spline here. To complete the spline, double click the last point or select the spline tool again.
1) Select the line tool 3) Move the cursor along the X direction (be careful to stay on the X axis alignment so that the line is perpendicular) and click for the second point of the line. Type 0.5 for
More informationAn Introduction to Autodesk Inventor 2010 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation
An Introduction to Autodesk Inventor 2010 and AutoCAD 2010 Randy H. Shih SDC PUBLICATIONS Schroff Development Corporation www.schroff.com 2-1 Chapter 2 Parametric Modeling Fundamentals Create Simple Extruded
More informationLesson 03: We will add water and will set the placing conditions for the material. WorldBuilder 3.5. for. About Digital Element Tutorials:
Lesson 03: We will add water and will set the placing conditions for the material for WorldBuilder 3.5 About Digital Element Tutorials: This tutorial is available both in.pdf format and in Qarbon format,
More informationCreating Vector Shapes Week 2 Assignment 1. Illustrator Defaults
Illustrator Defaults Before we begin, we are going to make sure that all of us are using the same settings within our application. For this class, we will always want to make sure that our application
More informationTRAINING SESSION Q2 2016
There are 8 main topics in this training session which focus on the Sketch tools in IRONCAD. Content Sketch... 2 3D Scene Background Settings... 3 Creating a new empty Sketch... 4 Foam with cut out for
More informationAutodesk Inventor 2019 and Engineering Graphics
Autodesk Inventor 2019 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the
More informationCS3240 Human-Computer Interaction Lab Sheet Lab Session 2
CS3240 Human-Computer Interaction Lab Sheet Lab Session 2 Key Features of Silverlight Page 1 Overview In this lab, you will get familiarized with the key features of Silverlight, such as layout containers,
More informationDigital City: Introduction to 3D modeling
Digital City: Introduction to 3D modeling Weixuan Li, 2017 PART I: Install SketchUp and Introduction 1. Download SketchUp Download SketchUp from their official website: https://www.sketchup.com Go to the
More information12 MEL. Getting Started with Maya 631
12 MEL MEL (Maya Embedded Language) is a powerful command and scripting language that gives you direct control over Maya's features, processes, and workflow. Maya s user interface is built using MEL scripts
More informationA Step-by-step guide to creating a Professional PowerPoint Presentation
Quick introduction to Microsoft PowerPoint A Step-by-step guide to creating a Professional PowerPoint Presentation Created by Cruse Control creative services Tel +44 (0) 1923 842 295 training@crusecontrol.com
More informationINVESTIGATE: PARAMETRIC AND CUSTOMIZABLE MODELS
LEARNING OBJECTIVES General Confidence writing basic code with simple parameters Understanding measurement and dimensions 3D Design (Parametric Modeling) Modifying parameters Basic OpenSCAD code Translation
More informationAutodesk Maya 2019 BASICS GUIDE
Kelly L. Murdock Autodesk Maya 2019 BASICS GUIDE SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com ACCESS CODE UNIQUE CODE INSIDE Powered by TCPDF (www.tcpdf.org) Visit
More informationTutorial THE BASICS GEOMETRY CLEANUP AND SHELL MESHING
Tutorial THE BASICS GEOMETRY CLEANUP AND SHELL MESHING Table of Contents 1. Introduction... 2 1.2. Prerequisites... 2 1.3. Problem description... 2 1.4. Data files... 2 2. Read the CAD file... 3 3. Checking
More information2 SELECTING AND ALIGNING
2 SELECTING AND ALIGNING Lesson overview In this lesson, you ll learn how to do the following: Differentiate between the various selection tools and employ different selection techniques. Recognize Smart
More informationlundi 7 janvier 2002 Blender: tutorial: Building a Castle Page: 1
lundi 7 janvier 2002 Blender: tutorial: Building a Castle Page: 1 www.blender.nl this document is online at http://www.blender.nl/showitem.php?id=4 Building a Castle 2000 07 19 Bart Veldhuizen id4 Introduction
More informationL E S S O N 2 Background
Flight, Naperville Central High School, Naperville, Ill. No hard hat needed in the InDesign work area Once you learn the concepts of good page design, and you learn how to use InDesign, you are limited
More information3 Polygonal Modeling. Getting Started with Maya 103
3 Polygonal Modeling In Maya, modeling refers to the process of creating virtual 3D surfaces for the characters and objects in the Maya scene. Surfaces play an important role in the overall Maya workflow
More informationIntroduction. tthink[box] OMAX 5555 JetMachining Center Tutorial: Drawing and Toolpath Generation With Intelli-MAX LAYOUT
tthink[box] OMAX 5555 JetMachining Center Tutorial: Drawing and Toolpath Generation With Intelli-MAX LAYOUT Introduction The OMAX 5555 Jetmachining Center is a precision abrasive jet machining tool. It
More information3ds Max Cottage Step 1. Always start out by setting up units: We re going with this setup as we will round everything off to one inch.
3ds Max Cottage Step 1 Always start out by setting up units: We re going with this setup as we will round everything off to one inch. File/Import the CAD drawing Be sure Files of Type is set to all formats
More information