Drawing. ก Viewports. ก Paper space Model space. Coordinate System (WCS) User coordinate System (UCS) Single
|
|
- Jane Bond
- 5 years ago
- Views:
Transcription
1 14 ก Drawing ก ก Drawing ก Workspaces ก ก Drawing ก ก ก Paper space Multiple Views ก ก ก ก Drawing ก - Paper space Model space ก Viewports ก (Print) Plot ก Paper space Model space ก Layout ก (Print) Plot ก ก Printer Plotter ก Paper space Model space Drawing ก ก Model space Model space ก 2-3- World Coordinate System (WCS) User coordinate System (UCS) Single viewport ก Viewports ก Drawing ก ก 2-3- Screen ก Viewport Viewport ก Viewport
2 Model space ON (Tilemode = 1) ก 2 ก Workspace ก ก ก ก Paper space mode Paper space ก Model space Paper space Paper space ก ก ก ก (Drawing Detail) ก ก Paper space Viewport ก Drawing ก Viewport ก ก Viewport ก Viewport ก Drawing ก Paper space Paper space ก ก Drawing
3 Paper space ON (Tilemode = 0) ก ก Model space Paper space Viewport Floating Viewport Viewport ก ก, ก Paper space ก ก Viewport ก กก Zoom Pan ก ก Paper space Workspace ก Model space with floating viewports ก ก Model space ก Viewport ก Viewport ก ก ก Viewport ก ก Model space with floating viewport ก ก Viewport Model space ก Zoom Pan Model space with floating viewport ก Viewport Status bar Workspace ก
4 ก Paper space ก View > Workspace ก Toolbar ก Status bar PMSPACE ก Enter 2. ก ก Paper space 3. ก OK ก Paper space Drawing ก Paper space ก Viewport Paper space ก Model space floating viewports ก View > Workspace ก Toolbar ก Status bar PMSPACE ก Enter 2. ก ก Model space, with floating viewports 3. ก OK ก Model space tiles viewports ก View > Workspace ก Toolbar ก Status bar PMSPACE ก Enter 2. ก ก Model space, with tiles viewports 3. ก OK
5 ก Model space with floating viewports Model space with tiles viewports Viewport ก ก Viewport Model space ก ก ก Paper space Model space with floating viewports A. ก Model space, with floating viewports B. ก Model space, with tiles viewports C. ก Paper space D. ก Viewport Paper space ก Layout Drawing Model space ก ก Viewport Viewport ก Model space ก Paper space Viewport Drawing Paper space ก ก ก Drawing Viewport Viewport ก ก ก, ก ก Viewport Paper space Viewport Model space Viewport Paper space ก Viewport Paper space Viewport ก Drawing Paper space Viewport Drawing ก Viewport ก Viewport 1. ก Tilemode OFF TILEMODE ก Enter ก (Prompt box) ก OFF 2.
6 ก View > Paper Space Views ก Toolbar MVIEW ก Enter 3. ก (Prompt box) ก Fit to view, Create 2 Viewports, Create 3 Viewports, Create 4 Viewports ก Drawing ก ก ก ก ก ก Viewport 4. ก (Prompt box) ก Horizontal, Vertical, Above, Below, Left Right ก Viewport 5. ก Model space Paper space ก (Prompt box) ก Fit To Screen ก Viewport ก ก Viewport ก ก ก ก : Viewport ก Viewport ก ก Viewport ก Viewport ก ก ก ก Viewport ก ก ก ก Viewport ก ก Viewport Viewport ก Paper space ก Viewport Vertical ( A), Horizontal ( B),
7 Three viewports arrange left ( C), Three viewports arrange right ( D), Three viewports arrange above ( E), Three viewports arrange below ( F), Three viewports arrange vertical ( G), Three viewports arrange horizontal ( H) Four viewports ( I) ก ก Viewport configuration ก View > Workspace ก Toolbar VPORT ก Enter 2. ก Save ก (Prompt box) 3. Viewport ก Enter 31 ก ก,, ($), (-) (_) ก ก ก Viewports ก Viewport ก ก Viewport ก Paper space Object snap ก Viewport ก,,, ก Drawing ก ก Viewport Paper space ก ก ก Viewport ก ก Viewports ก Viewport ก Viewport ก Model space with floating viewports ก Viewport ก ก ก ก ก Viewport ก ก ก ก Viewport ก ก Viewport ก Grip, Snap setting, Zoom Viewpoint orientation ก Viewport ก ก Viewports 1. Model space with floating viewports 2. ก Viewport ก ก 3. ก ก ก ก ก Viewport Viewpoint orientation Model space with floating viewports ก ก Model space Zoom
8 Paper space ก ก - Viewport ก ก Scale factor ก ก - Viewport ก (Suffix) xp กก Scale factor ก Viewport ก 2xp ก Viewport ก ก 0.5xp ก - Viewport Model space with floating viewports 1. Model space with floating viewports 2. ก Viewport ก ก 3. ก View > Zoom > Zoom 4. Scale factor ก ก Enter ก ก ก ก ก ก ก ก ก ก ก ก ก ก ก, ก ก ก ก lineweight. ก ก ก ก PCP ก ก ก ก ก ก ก ก ก ก File > Print Setup PRINT ก Enter ก ก ก Print Setup psetup ก Enter 2. ก ก ก ก ก ก ก OK ก ก ก drawing ก 1. ก ก 2. ก File > Print PRINT ก Enter
9 3. ก Advanced 4. ก Print Upside Down 5. ก Save Changes to Layout, ก Apply กก ก ก Printer Plotter ก ก Printer Plotter ก ก ก Printer Plotter ก File > Print Setup PRINT ก Enter ก ก ก Print Setup psetup ก Enter 2. Name ก Printer Plotter ก ก Printer Plotter ก Name NOTE ก ก ก ก ก ก ก ก Print Setup ก ก Scale View Drawing ก ก ก ก ก Scale/View ก ก ก ก ก ก Drawing ก ก ก Origin ก - ก ก 0,0 - ก - ก ก ก Origin ก ก Coordinate ก ก
10 Drawing ก ก ก ก ก ก ก ก ก ก ก ก ก ก Drawing ก Drawing ก ก ก File > Print PRINT ก Enter 2. ก ก ก Scale/View 3. ก Drawing ก ก ก ก Check box Fit print area to size of page Print Scale ก ก ก ก File > Print PRINT ก Enter 2. ก ก ก Scale/View 3. ก ก Check box Fit print area to size of page Print Scale 4. User Defined Scale ก 5. ก ก ก Inches Millimeters
11 A. ก ก ก B. ก C. ก X Y 2 ก ก Select Print Area ก ก Drawing D. ก ก ก ก ก E. ก ก ก ก F. ก G. Drawing ก ก H. ก Print area I. J. กก ก K. ก ก ก ก ก ก File > Print
12 PRINT ก Enter 2. ก ก ก Scale/View 3. Print Area ก Current View ก Saved View ก ก ก Extent ก Drawing Limits ก ก Windows ก ก Drawing ก Windows ก ก Windows Print Area ก X Y coordinates ก Select Print Area ก Drawing ก ก ก ก ก ก Check box Print Only Area Within Specified Windows 4. Entities To Print ก All Entities Within Print Area Print area Selected Entities Within Print Area ก Print area ก ก ก ก File > Print PRINT ก Enter 2. ก Advanced 3. Print offset ก ก ก Drawing ก Center On Page ก ก ก X Y coordinates ก Select Origin ก ก ก Drawing
13 ก ก Lineweight กก Lineweight ( : 0.5mm, 1mm) ก drawing ก lineweight ก ก ก Scale/View ก ก ก layout ก ก ก lineweight ก 1. ก ก 2. ก File > Print PRINT ก Enter 3. ก Advanced 4. ก ก ก lineweight Print Lineweights ก ก lineweight Scale Lineweights ก ก lineweight drawing ก 5. ก ก Save Changes to Layout ก ก Apply กก NOTE ก ก lineweight ก
14 A. ก ก ก B. ก ก C. ก ก ก ก ก PCP D. ก ก ก ก ก ก PCP E. ก F. lineweight G. lineweight ก ก Scale/View H. ก ก ก ก Drawing I. ก ก ก X Y coordinate J. ก ก ก Drawing K. ก ก L. ก M. กก ก N. ก ก ก
15 ก ก (Print styles) CAD ก ก (Print style) ก ก ก ก, กก, lineweight ก drawing ก ก ก drawing ก drawing ก ก ก ก ก ก ก ก lineweight ก ก ก ก ก ก ก ก ก ก ก ก drawing ก ก ก ก ก ก ก ก ก ก ก drawing ก ก ก ก ก drawing ก 1 ก 2 Color-dependent (CTB) ก ก ก ก ก drawing 255 Named (STB) ก ก ก ก color-dependent ก ก ก ก ก ก ก ก ก named ก ก ก ก ก ก กก
16 ก ก ก drawing ก ก ก ก ก ก ก ก drawing ก ก ก Drawing ก ก 1 1 ก ก 1 ก ก 1 ก ก ก ก WallPstyle ก ก ก ก ก ก ก ก ก ก ก drawing ก ก ก ก ก ก ก drawing ก ก, กก, ก ก ก ก ก ก ก ก ก ก 1. ก ก 2. ก ก File > Print. print ก Enter. 3. ก Advanced 4. Print Style Table (Pen Assignments), ก ก None applies no print style table. Entities print according to their own properties. Icad uses the default print style table and its color assignments. Monochrome prints all colors as black. 5. ก Yes ก ก ก drawing ก No ก ก 6. ก Save Changes to Layout, ก Apply กก
17 ก ก CAD ก ก ก 1. ก ก File > Print Styles Manager stylesmanager ก Enter. 2. ก Create a Print Style Table. 3. ก ก ก Print Style Table Editor ก ก ก ก 1. ก ก File > Print Styles Manager stylesmanager ก Enter. 2. ก Print Style Table. ก ก 3. ก General description ก Apply Global Scale Factor to Non-ISO Linetypes scale factor ก non-iso ก ก fill pattern AutoCAD CAD scale factor 4. ก Properties ก ก ก, กก, ก ก ก ก ก ก Add Style ก OK ก ก ก ก ก ก ก ก ก Delete Style 5. ก OK
18 A Select a print style to modify it. B Enter a description for the selected print style. C Click to create a new print style. (Named print style tables only.) D Click to delete the selected print style. (Named print style tables only.) E Click to modify the list of available lineweights for the current print style table. F Click to save the print style table with a new name or in a new location. G Choose a lineweight for the selected print style. H Choose a linetype for the selected print style. I Type or scroll to the width of the virtual pen for the selected print style (for printers that don t have physical pens, such as laser or inkjet printers). J Type or scroll to the width of the physical pen for the selected print style. K Choose a color for the selected print style. ก copy, ก ก copy, Print Style Manager ก ก.
19 ก ก drawing ก ก ก color-dependent (*.ctb) named (*.stb) drawing drawing ก drawing PSTYLEMODE ก drawing ก (named print style table) 1. ก color-dependent ก convert ( convert) 2. drawing color-dependent (*.ctb) 3. convertpstyles ก Enter 4. convert ก OK convert ก Cancel ก convertctb convert color-dependent (named print style table) 5. ก (named print style table)(*.stb) 6. ก Open ก drawing ก color-dependent ก ก ก ก ก ก ก ก ก ก ก ก 1. ก ก 2. ก ก File > Print. print ก Enter. 3. ก Advanced 4. Print Style Table (Pen Assignments), ก None. 5. ก Yes ก ก ก No ก ก 6. ก Save Changes to Layout, ก Apply ก
20 ก Printer configuration files Print configuration ก ก ก ก ก ก ก ก ก ก Plot configuration (PCP) Format ก AutoCAD ก ก CAD ก : ก Convert AutoCAD PC2 PCP Device And Default selection ก ก AutoCAD ก - ก PCP ก File > Print PRINT ก Enter 2. ก Advanced 3. Print Configuration File ก Open ก PCP ก Save ก ก ก ก (Print Plot) Drawing ก Print Plot Microsoft Windows ก ก ก Drawing ก ก Drawing ก Drawing Plot configuration (PCP) ก ก ก Printer configuration ก ก ก (Header) ก ก (Footer),,, ก ก ก ก Preview ก Drawing ก Default Printer ก ก ก Preview ก Drawing ก
21 ก File > Print Preview ก Toolbar PPreview ก Enter 2. ก Drawing ก ก Print Print setting ก ก Drawing ก ก Close Zoom in ก Zoom out ก ก - ก ก Print setting ก ก ก ก Print Cancel ก Preview กก ก Drawing ก ก (Print) ก ก ก 3 Scale/View, Color/Width Map Advanced ก 3 NOTE ก Render ก Printer ก Render ก Export Drawing ก Format Bitmap (.bmp), Postscript (.PS) TIFF (.TIF) ก ก ก ก ก Chapter 15
22 ก ก (Print) 2. ก File > Print ก Toolbar PRINT ก Enter 3. ก ก ก ก ก 4. ก Print NOTE ก ก ก ก ก ก ก ก ( Default) ก Reset กก ก ก Color Width ก Drawing ก ก ก ก ก ก Drawing ก ก ก ก ก ก Plotter ก Plotter ก Microsoft Windows ก Printer ก Color ก File > Print PRINT ก Enter 2. ก ก Color/Width Map 3. Output Color ก ก ( ก ก Color) 4. ก Color ก ก ก OK 5. ก ก Map Properties NOTE ก ก ก CTRL SHIFT ก ก ก ก Screen color ก ก ก Output Color ก (Line width)
23 ก File > Print PRINT ก Enter 2. ก ก Color/Width Map 3. Line width ก ก ( ก Active ) 4. ก 5. ก Map Properties ก NOTE ก ก ก ก A. B. ก C. D. ก ก ก ก File > Print PRINT ก Enter 2. ก ก Color/Width
24 3. Screen Color ก ก ก ก Screen Color ก ก ก SHIFT ก 4. Map properties ก ก Output Color ก ก ก OK ก ก Output Color ก ก ก Map Properties ก NOTE ก ก ก ก ก ก ก ก ก ( Default) ก Reset ก ก
Setting Up Your Drawing Environment
Setting Up Your Drawing Environment In This Chapter 3 After you start a drawing, you can change its settings, including drawing units and limits, snap and grid settings, and layer, linetype, and lettering
More informationControlling the Drawing Display
Controlling the Drawing Display In This Chapter 8 AutoCAD provides many ways to display views of your drawing. As you edit your drawing, you can control the drawing display and move quickly to different
More informationEDUCATIONAL REND LAKE COLLEGE CAD INTRODUCTION TO COMPUTER-AIDED DRAFTING PLOTTING FROM MODEL SPACE/PAPER SPACE(LAYOUTS) REVISED: FALL 2010
INSTRUCTOR: THOMAS ARPASI REND LAKE COLLEGE CAD 1201-51 INTRODUCTION TO COMPUTER-AIDED DRAFTING PLOTTING FROM MODEL SPACE/PAPER SPACE(LAYOUTS) 1 Plotting From Model Space Even with the advent of CAD, the
More informationGetting Started. In This Chapter
Getting Started In This Chapter 2 This chapter introduces concepts and procedures that help you get started with AutoCAD. You learn how to open, close, and manage your drawings. You also learn about the
More informationRun Specifi by clicking on the icon on your Desktop.
Run Specifi by clicking on the icon on your Desktop. Note: If you are using a demo version, once the program is loaded, a message will tell you the remaining days of the evaluation period. The main screen
More informationAccessing Rhino Page Layouts
Accessing Rhino Page Layouts In this exercise, we will use the Page (Sheet) Layout feature to create sheet with Details and title block. The Details will include text and dimensions that are sized correctly
More informationAdding a New Plotter using Tools/Preferences. First you must select tools from the menu bar, then select preferences to add a new plotter.
Adding a New Plotter using Tools/Preferences First you must select tools from the menu bar, then select preferences to add a new plotter. Preferences Dialog Box In Order to add a new Printer you must select
More informationLABORATORY 4: TO CONSTRUCT CAD MULTIPLE VIEWS I AND II
LABORATORY 4: TO CONSTRUCT CAD MULTIPLE VIEWS I AND II OBJECTIVES: After completing this session, you should be able to: 1. Use the User Coordinate System 2. Convert a solid model to a multiview using
More informationAccessing the Internet
Accessing the Internet In This Chapter 23 You can use AutoCAD to access and store AutoCAD drawings and related files on the Internet. This chapter assumes familiarity with basic Internet terminology. You
More informationClass #2 Lab: Basic CAD Skills & Standards. Basic AutoCAD Interface AutoCAD Skills AutoCAD Standards
Class #2 Lab: Basic CAD Skills & Standards 1230 Building Tech II NYC College of Technology Professor: Daniel Friedman AIA LEED AP Fall 2012 Paperspace/ Layouts Paperspace Paperspace Paperspace Paperspace
More informationAutoVue Desktop Edition. User s Manual
AutoVue Desktop Edition User s Manual Support Information If you have any questions or require support for AutoVue please contact Contact Information If at any time you have questions or concerns regarding
More informationTo change the shape of a floating toolbar
Modifying toolbars You can change the size of toolbar buttons and reposition, add, or delete toolbar buttons. You can also change the toolbar name and turn tooltips on and off. An important item to note-
More informationNEWSCenter. InfoQuest Limited / Updated: 5-Feb-07 NEWSCenter Call Center: Ext. 222
1 ก ก NEWSCenter (1) (2) ก ก 1 ก ก 9 ก ก 2 ก 9 ก 2 NEWSCenter Toolbars 10 ก ก 2 ก Query Builder 10 ก ก 3 ก Word List 11 ก 4 ก User Defined Topics 12 ก ก 5 ก Previous / Next Highlight 12 ก ก 6 ก 13 ก ก
More informationRun Specifi by clicking on the icon on your Desktop.
Run Specifi by clicking on the icon on your Desktop. Note: If you are using a demo version, once the program is loaded, a message will tell you the remaining days of the evaluation period. The main screen
More informationCMI Standards Manager v11 User Training Manual
CMI Standards Manager v11 User Training Manual CAD Masters, Inc. 1111 Civic Drive, Suite 130 Walnut Creek, CA 94596 (925) 939-1378 sales (925) 939-1399 support Table of Contents CONVENTIONS USED IN THIS
More informationTable of contents. What is new in Advance CAD 2016
What's New in Advance CAD 2016 Table of contents NEWS... 5 1: New feel for the interface... 5 2: New and improved Help Documentation... 5 3: TRANSPARENCY property added... 5 4: ETRANSMIT command included...
More informationDWG FastView for Web. User Guide
DWG FastView for Web User Guide Contents 1. Software installation and start-up... 1 1.1 Software installation... 1 1.2 Software start-up... 1 2.Operation interface and functions... 3 2.1 Operation interface...
More informationCADAM Drafting Hints and Tips
CADAM Drafting Hints and Tips Editing Associative Dimensions: Circles: You can globally associate all dimensions with their referenced geometry. That means you can import an unintelligent drawing using
More informationTable of content CONTENT OF THE TRAINING PACKAGE... 1 MODULE 1: UNDERSTANDING A DWG-DRAWING... 2
V14 Basic Training Table of content CONTENT OF THE TRAINING PACKAGE... 1 1 Documentation... 1 2 Exercises... 1 3 Software... Fout! Bladwijzer niet gedefinieerd. MODULE 1: UNDERSTANDING A DWG-DRAWING...
More informationThe Department of Construction Management and Civil Engineering Technology CMCE-1110 Construction Drawings 1 Lecture Introduction to AutoCAD What is
The Department of Construction Management and Civil Engineering Technology CMCE-1110 Construction Drawings 1 Lecture Introduction to AutoCAD What is AutoCAD? The term CAD (Computer Aided Design /Drafting)
More informationReport Generator for DPOPWR
Online Help Report Generator for DPOPWR Adapted from the Report Generator for DPOPWR Online Help www.tektronix.com Copyright Tektroni x. All rights reserved. Licensed software products are owned by Tektronix
More informationFLATTERY TO PRINT TUTORIAL
FLATTERY TO PRINT TUTORIAL 1. With building shell completely unfolded and flat, select all pieces to print 2. Move flattened pattern to unoccupied area of model space 3. Turn off perspective: Camera >
More informationStickFont v2.12 User Manual. Copyright 2012 NCPlot Software LLC
StickFont v2.12 User Manual Copyright 2012 NCPlot Software LLC StickFont Manual Table of Contents Welcome... 1 Registering StickFont... 3 Getting Started... 5 Getting Started... 5 Adding text to your
More information3D AUTOCAD. The view we ve been working in is a top or plan view. From this view even a 3D drawing will appear 2D.
3D AUTOCAD Thus far, we ve looked at tools and operations in 2D with work completed on only the X- and Y- axes. The axes symbol has been present on our screen but we haven t had much use for it. The view
More informationAssignment 5 Layers CAD Fundamentals I Due February 15 Architecture 411
Due February 15 Architecture 411 Objective To learn to use layers to group drawing information and manipulate the appearance of drawings. To understand the concepts of paper space, model space, and viewports.
More informationFixed problem with PointXYZ command's Z value changing to previous Y value.
DesignCAD 3D Max 19.1 Release Notes Mar. 20, 2009 DesignCAD 19.1 offers the following fixes and enhancements: The number of useable layers was increased from 1,000 to 2,000. Fixed problem with PointXYZ
More informationBack to Flat Producing 2D Output from 3D Models
Back to Flat Producing 2D Output from 3D Models David Cohn Modeling in 3D is fine, but eventually, you need to produce 2D drawings. In this class, you ll learn about tools in AutoCAD that let you quickly
More informationCHAPTER 1 COPYRIGHTED MATERIAL. Getting to Know AutoCAD. Opening a new drawing. Getting familiar with the AutoCAD and AutoCAD LT Graphics windows
CHAPTER 1 Getting to Know AutoCAD Opening a new drawing Getting familiar with the AutoCAD and AutoCAD LT Graphics windows Modifying the display Displaying and arranging toolbars COPYRIGHTED MATERIAL 2
More informationMANUAL NO. OPS647-UM-151 USER S MANUAL
MANUAL NO. OPS647-UM-151 USER S MANUAL Software Usage Agreement Graphtec Corporation ( Graphtec ) hereby grants the purchaser and authorized User (the User ) the right to use the software (the Software
More informationAutoCAD guide. EZ Cutter 200. (EZ Laser Cutter LCW-200R) Follow this guide step by step to prepare your file for the Laser cutter.
AutoCAD guide EZ Cutter 200 (EZ Laser Cutter LCW-200R) Follow this guide step by step to prepare your file for the Laser cutter. STEP #1 Open your *.dwg file in AutoCAD, where * is the name of your dwg
More informationContents. Overview...2. Server Install...2. Client Install...4. Administration Module...6. FastLook Features...10
Contents Overview...2 Server Install...2 Client Install...4 Administration Module...6 FastLook Features...10 This guide is intended to help you install the LAN version of FastLook. Please refer to the
More informationFastLook. LAN License. This guide is intended to help you install the FastLook LAN version.
FastLook LAN License This guide is intended to help you install the FastLook LAN version. Please refer to the electronic help file for more details on the operation of FastLook. Contents Overview...1 Server
More informationPLEASE READ: Important information about using some software applications with your HP DesignJet 750C or 750C Plus Plotter!
PLEASE READ: Important information about using some software applications with your HP DesignJet 750C or 750C Plus Plotter! This document contains information you need to set up your application software
More informationAutoCAD HDI Printer Drivers. User Manual
AutoCAD HDI Printer Drivers User Manual Océ-Technologies B.V. Copyright Océ-Technologies B.V. Venlo, The Netherlands 2004 All rights reserved. No part of this work may be reproduced, copied, adapted, or
More informationOgres Have Layers: Beginning with their Templates
12/3/2008-10:15 am - 11:45 am Room:Murano 3301 (PTD) Ogres Have Layers: Beginning with their Templates Colleen Klein - Training Content Manager, MasterGraphics and David Braun (Assistant); Volker Cocco
More informationQuick Start Guide. ASR Automated Systems Research Inc. Toll free: Fax:
Quick Start Guide ASR Automated Systems Research Inc. Toll free: 1-800-818-2051 Phone: 604-539-0122 e-mail: support@asrsoft.com Fax: 604-539-1334 www.asrsoft.com Copyright 1991-2014 ASR Automated Systems
More informationDendrogram export options
BioNumerics Tutorial: Dendrogram export options 1 Introduction In this tutorial, the export options of a dendrogram, displayed in the Dendrogram panel of the Comparison window is covered. This tutorial
More informationAEMLog Users Guide. Version 1.01
AEMLog Users Guide Version 1.01 INTRODUCTION...2 DOCUMENTATION...2 INSTALLING AEMLOG...4 AEMLOG QUICK REFERENCE...5 THE MAIN GRAPH SCREEN...5 MENU COMMANDS...6 File Menu...6 Graph Menu...7 Analysis Menu...8
More informationAutoCAD Preview Guide.
AutoCAD 2009 Preview Guide www.autodesk.com/autocad Contents Introduction... 3 User Interface... 3 Application Window... 3 Menu Browser... 3 Quick Access Toolbar... 6 InfoCenter... 6 Ribbon... 7 Status
More informationIBM TRIRIGA Application Platform Version 3.2. Graphics User Guide. Copyright IBM Corp i
IBM TRIRIGA Application Platform Version 3.2 Graphics User Guide Copyright IBM Corp. 2011 i Note Before using this information and the product it supports, read the information in Notices on page 31. This
More informationIBM TRIRIGA Application Platform Version 3.3. Graphics User Guide. Copyright IBM Corp i
IBM TRIRIGA Application Platform Version 3.3 Graphics User Guide Copyright IBM Corp. 2011 i Note Before using this information and the product it supports, read the information in Notices on page 33. This
More informationStickFont Editor v1.01 User Manual. Copyright 2012 NCPlot Software LLC
StickFont Editor v1.01 User Manual Copyright 2012 NCPlot Software LLC StickFont Editor Manual Table of Contents Welcome... 1 Registering StickFont Editor... 3 Getting Started... 5 Getting Started...
More informationChapter 4. Part 1 AutoCAD Basics
Chapter 4. Part 1 AutoCAD Basics Chapter Objectives Describe the AutoCAD screen layout. Perform an AutoCAD drawing setup, including setting units, limits, layers, linetypes, and lineweights. Explain the
More informationXnView 1.9. a ZOOMERS guide. Introduction...2 Browser Mode... 5 Image View Mode...15 Printing Image Editing...28 Configuration...
XnView 1.9 a ZOOMERS guide Introduction...2 Browser Mode... 5 Image View Mode...15 Printing... 22 Image Editing...28 Configuration... 36 Written by Chorlton Workshop for hsbp Introduction This is a guide
More informationAutoCAD 2009 User InterfaceChapter1:
AutoCAD 2009 User InterfaceChapter1: Chapter 1 The AutoCAD 2009 interface has been enhanced to make AutoCAD even easier to use, while making as much screen space available as possible. In this chapter,
More informationUsing Layers Chapter 4
Using Layers Chapter 4 Sacramento City College EDT 310 EDT 310 - Chapter 4 1 Introduction to Layers EDT 310 - Chapter 4 2 Introduction To Layers In manual drafting, details of a design are separated by
More informationRoadway Alignments and Profiles
NOTES Module 15 Roadway Alignments and Profiles In this module, you learn how to create horizontal alignments, surface profiles, layout (design) profiles, and profile views in AutoCAD Civil 3D. This module
More informationBuildersCAD 8.3 New Features
BuildersCAD 8.3 New Features Plotting PDF Plotting The plot functions for PDF have been moved to their own menu You can access it from a button at the lower right of the regular plot menu: Or from the
More informationONYX 12 Finishing Tools
WHITE PAPER ONYX 12 ONYX 12 Finishing Tools ONYX 12 provides the ability to add bleed and grommets to any job. They are a part of the new Finishing tools. This document explains how to use bleed and grommets.
More informationFastLook. Distributed Network License
FastLook Distributed Network License This guide is intended to help you install the Distributed Network version of FastLook. Please refer to the electronic help file for more details on the operation of
More informationAppendix A General Information
Appendix A General Information Symbols/Blocks (for Main Extensions only) Note: Dynamic blocks do not work with Civil 3D styles. Rotate symbols to the proper orientation. INCORRECT CORRECT Adjust the hydrant
More informationNiceLabel Designer Standard User Guide
NiceLabel Designer Standard User Guide English Edition Rev-1112 2012 Euro Plus d.o.o. All rights reserved. Euro Plus d.o.o. Poslovna cona A 2 SI-4208 Šenčur, Slovenia tel.: +386 4 280 50 00 fax: +386 4
More informationAutoCAD & CADPIPE Electrical Template Drawing Setup
AutoCAD & CADPIPE Electrical Template Drawing Setup Setting up a template drawing ensures that when starting a new drawing the AutoCAD and CADPIPE settings are all setup and will be consistent in all drawings.
More informationXPEL DAP SUPPORT. DAP Tool List & Overview DESCRIPTION ICON/TOOL (SHORTCUT)
Pointer (S) Left-click on individual entities to add them to the current selection (selected entities will turn red). If the entity selected is a member of a group, the entire group will be added to the
More informationUSING DATA DRIVEN PAGES
USING DATA DRIVEN PAGES Mid-West ESRI Utility User s Group Conference March 26, 2014 Presented by: Hillary Bjorstrom, GIS Analyst STAR Energy Services LLC Alexandria, Minnesota EXERCISE 1 CREATING A GRID
More informationSOEM 024: Computer Aided Design. E. Rozos
SOEM 024: Computer Aided Design E. Rozos Lesson structure Construct 3D objects with revolving WCS UCS Master plotting Realism Geometrical analysis Stress analysis Kinematics dynamic simulation Revolve,
More informationKate Morrical s Tips and Tricks for Using AutoCAD LT 2011
Kate Morrical s s and Tricks for Using AutoCAD LT 2011 This table of contents is interactive! Clicking on the section title or page number will bring you right to that section. The User Interface 2 The
More informationTetra4D Reviewer. Version 5.1. User Guide. Details on how to use Tetra4D Reviewer.
Tetra4D Reviewer Version 5.1 User Guide Details on how to use Tetra4D Reviewer. ii Contents Chapter 1: Work area... 7 Looking at the work area... 7 Toolbars and toolbar presets... 8 About toolbars and
More informationAcrobat X Professional
Acrobat X Professional Toolbar Well Page Navigations/Page Indicator Buttons for paging through document Scroll Bar/box page indicator appears when using the scroll button to navigate. When you release
More informationAwesome Presentations Using Autodesk Land Desktop 2006
11/30/2005-3:00 pm - 4:30 pm Room:Osprey 2 [Lab] (Swan) Walt Disney World Swan and Dolphin Resort Orlando, Florida Lucy Kuhns - Holman's Inc. and David Blanchette (Assistant); Jessica Montoya (Assistant)
More informationContents. Overview...2. License manager Installation...2. Configure License Manager...3. Client Installation...8. FastLook Features...
Contents Overview...2 License manager Installation...2 Configure License Manager...3 Client Installation...8 FastLook Features...10 This guide is intended to help you install the Distributed Network version
More informationTexGraf4 GRAPHICS PROGRAM FOR UTEXAS4. Stephen G. Wright. May Shinoak Software Austin, Texas
TexGraf4 GRAPHICS PROGRAM FOR UTEXAS4 By Stephen G. Wright May 1999 Shinoak Software Austin, Texas Copyright 1999, 2007 by Stephen G. Wright - All Rights Reserved i TABLE OF CONTENTS Page LIST OF TABLES...v
More informationCustomizing Interface Elements and Commands Part 02
Customizing Interface Elements and Commands Part 02 Sacramento City College Engineering Design Technology Customizing Interface Elements and Commands 1 Creating New Commands Customizing Interface Elements
More informationExcel Level Three. You can also go the Format, Column, Width menu to enter the new width of the column.
Introduction Excel Level Three This workshop shows you how to change column and rows, insert and delete columns and rows, how and what to print, and setting up to print your documents. Contents Introduction
More informationChapter 1. Getting Started with AutoCAD
Chapter 1 Getting Started with AutoCAD 3 4 AutoCAD 2002: The Complete Reference This chapter takes you on a tour of AutoCAD and provides an overview of the different components of the AutoCAD screen. It
More informationLinkMotion and CorelDraw 9, 10, 11, 12, X3, X4, X5, X6, X7 and X8:
LinkMotion and CorelDraw 9, 10, 11, 12, X3, X4, X5, X6, X7 and X8: After you install LinkMotion software and set up all settings launch CorelDraw software. Important notes: Solustan s LinkMotion driver
More informationLayer Filters. Sacramento City College Engineering Design Technology. Layer Filters 1
Layer Filters Sacramento City College Engineering Design Technology Layer Filters 1 Layer Filters A large number of layers in a drawing Is cumbersome to use when all layers are displayed. Layer filters
More informationGCC vinyl cutter, cutting plotter for sign making
Plotter Setup In "Plotter Setup," you can choose "Plotter List," "Environment," "Pen," and so on. [Plotter list] In this area, you can choose the machine type and set some basic information for your plotter
More informationAll of these Charts are Helpful but the real test is to download a fully functional 30 day Trial Copy and see for yourself. AutoCAD.
GstarCAD vs AutoCAD & Native IntelliCAD All of these Charts are Helpful but the real test is to download a fully functional 30 day Trial Copy and see for yourself GstarCAD AutoCAD Native IntelliCAD Features
More informationVizit Pro User Manual
Vizit Pro User Manual 1 Table of Contents Vizit Pro User Manual... 1 Using Vizit Pro... 3 The Vizit Pro User Interface... 3 Toolbars... 4 File Tab Toolbar... 4 Edit Tab Toolbar... 5 Annotations Tab Toolbar...
More informationAutoCAD 2004 What s New
AutoCAD 2004 What s New - 1 AutoCAD 2004 What s New Many have asked what is in the new version of AutoCAD with 2004. You will find many things have changed from large to small in size. Below is a break
More informationGetting Started Guide
Océ Client Tools software version 2.3 Overview Océ Client Tools software is a free collection of file processing and printing utilities for designers and engineers. The tools allow you to batch-process
More informationFrom the dock at the left, right, top, or bottom of your monitor screen, open the Finder.
GETTING STARTED Composition & Defamiliarization: Using Adobe Illustrator as a Tool Kristen Foster 2010 Drawing and Composition Module OTIS College of Art and Design Trash preferences + Open Illustrator
More informationCompatible with AutoCAD 2013 to 2018
CADMANAGERTOOLS.COM BatchInEditor 4.0 Automated Batch process tool for AutoCAD and Verticals Compatible with AutoCAD 2013 to 2018 BatchInEditor - Batch process for AutoCAD Introduction: The BatchInEditor
More informationTHE BELTBLOCK MAGIC OR SCIENCE?
Mark S. Schwendau www.cadproblems.us Draftsight s Unspoken 3-D Features - Lesson 11 A Short 3-D Tutorial of Draftsight THE BELTBLOCK MAGIC OR SCIENCE? DIRECTIONS: The following pages contain a Draftsight
More informationQuick & Simple Imaging. User Guide
Quick & Simple Imaging User Guide The Quick & Simple Imaging software package provides the user with a quick and simple way to search and find their documents, then view, print, add notes, or even e- mail
More informationMicrosoft Excel 2010 Part 2: Intermediate Excel
CALIFORNIA STATE UNIVERSITY, LOS ANGELES INFORMATION TECHNOLOGY SERVICES Microsoft Excel 2010 Part 2: Intermediate Excel Spring 2014, Version 1.0 Table of Contents Introduction...3 Working with Rows and
More informationLaser Engraving Using Base and Mass Production Modules
ARPATHIA GRAPHIC INTERFACE Users Reference Guide Laser Engraving Using Base and Mass Production Modules 1 Table of Contents Page CGI Modules Carpathia Installation Carpathia Document Writer installation
More informationTutorial 3: Constructive Editing (2D-CAD)
(2D-CAD) The editing done up to now is not much different from the normal drawing board techniques. This section deals with commands to copy items we have already drawn, to move them and to make multiple
More informationJUSTCROFT INTERNATIONAL PRINTING AND PLOTTING SOLUTIONS. JustCGM 5.0 User Manual
JUSTCROFT INTERNATIONAL PRINTING AND PLOTTING SOLUTIONS JustCGM 5.0 User Manual Justcroft International JustCGM 5.0 User Manual Revision: 1.5, March 7, 2012 Copyright 2011-2012 Justcroft International
More informationFiles Pro Std Pro Std Com LT
Files Pro Std Pro Std Com LT 32-bit / 64-bit Support.dwg/.dxf for AutoCAD version 2.5 to 2015.pat,.shx,.lin and etc Password Protection and Digital Signatures File Recover and Audit Purge Etransmit Sheet
More informationGstarCAD Files Pro Std. Interface Pro Std. 32-bit / 64-bit Support. .dwg and.dxf for AutoCAD version 2.5 to pat,.shx,.
Files Pro Std 32-bit / 64-bit Support.dwg and.dxf for AutoCAD version 2.5 to 2016.pat,.shx,.lin and etc Password Protection and Digital Signatures File Recover and Audit Purge Etransmit Sheet Set Manager
More information1 Introduction to AutoCAD
1 Introduction to AutoCAD The term CAD (Computer Aided Design) applies to a wide range of programs that allow th user to created drawings, plans, and designs electronically. AutoCAD is one such program
More informationKIP AutoCAD 2000 / 2000i / 2002 / 2004 HDI Driver Version 2.36, Document Release
KIP AutoCAD 2000 / 2000i / 2002 / 2004 HDI Driver Version 2.36, Document Release 5.2.2003.2 1. Overview and Features The KIP America provided driver for AutoCAD 2000, 2000i, 2002, and 2004 has been designed
More informationimos Drawing Output The following document includes the topics borders and viewsets.
imos Drawing Output The following document includes the topics borders and viewsets. We have attempted to keep the content of the document complete, accurate and under permanent review. However, due to
More informationGstarCAD Files Pro Std. Interface Pro Std. Selection, Snap & Track Pro Std. Dimensions Pro Std
GstarCAD 2018 Files Pro Std 32-bit / 64-bit Support.dwg and.dxf for AutoCAD version 2.5 to latest.pat,.shx,.lin and etc Password Protection File Recover and Audit Purge Etransmit Sheet Set Manager CAD
More informationMIMAKI ENGINEERING CO., LTD.
For Windows XP/Windows 2000 Cutting Application Software SimpleCut Operation Manual MIMAKI ENGINEERING CO., LTD. D201463 Contents Introduction 1 About this Manual 2 Chapter 1 Installation Procedure 3
More informationDW-2016 Details_CPCS_EngStds.dwt
Section 10.4 DW-2016 Details_CPCS_EngStds.dwt Overview - Section 10.4 This template shall be used to create detail drawings for DW Engineering Standards and the Capital Projects Construction Standards
More informationAutoCAD DWG Drawing Limitations in SAP 3D Visual Enterprise 9.0 FP02
AutoCAD DWG Drawing Limitations in SAP 3D Visual Enterprise 9.0 FP02 AutoCAD Import Limitations The following is a list of AutoCAD features that will not give an expected viewable when using SAP 3D Visual
More informationKODAK Software User s Guide
KODAK Create@Home Software User s Guide Table of Contents 1 Welcome to KODAK Create@Home Software Features... 1-1 Supported File Formats... 1-1 System Requirements... 1-1 Software Updates...1-2 Automatic
More informationAutoCAD and AutoCAD LT Update Preview Guide
AutoCAD 2018.1 and AutoCAD LT 2018.1 Update Preview Guide The AutoCAD 2018.1 Update offers new software enhancements and tools to simplify your workflows and improve productivity. To help you quickly identify
More informationS206E Lecture 3, 5/15/2017, Rhino 2D drawing an overview
Copyright 2017, Chiu-Shui Chan. All Rights Reserved. S206E057 Spring 2017 Rhino 2D drawing is very much the same as it is developed in AutoCAD. There are a lot of similarities in interface and in executing
More informationDesigning & Creating your GIS Poster
Designing & Creating your GIS Poster Revised by Carolyn Talmadge, 11/26/2018 First think about your audience and purpose, then design your poster! Here are instructions for setting up your poster using
More informationHow Smart Are Your Tables? Jeanne Aarhus Aarhus Associates, LLC
How Smart Are Your Tables? Jeanne Aarhus Aarhus Associates, LLC AC2251-L Are you using tables in AutoCAD software to their fullest potential? Do you still manually collect data from your AutoCAD file,
More informationTeamcenter Working with 2D Images. Publication Number PLM00122
Teamcenter 10.1 Working with 2D Images Publication Number PLM00122 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens Product Lifecycle Management
More information42 X : ] [ : 100 : ] III IV. [ Turn over
B 2015 42 X : 30. 07. 2015 ] [ : 100 : 10-30 11-30 ] 1. 2. 3. 4. 5. I II III IV V [ Turn over Code No. 42 X 2 B Computer Examination, July, 2015 GRAPHIC DESIGNER COURSE ( Theory ) Time : 1 hour ] [ Max.
More information42 X : ] [ : 100 : ] III IV. [ Turn over
A 2015 42 X : 30. 07. 2015 ] [ : 100 : 10-30 11-30 ] 1. 2. 3. 4. 5. I II III IV V [ Turn over Code No. 42 X 2 A Computer Examination, July, 2015 GRAPHIC DESIGNER COURSE ( Theory ) Time : 1 hour ] [ Max.
More informationPl_Editor. August 24, 2017
Pl_Editor Pl_Editor ii August 24, 2017 Pl_Editor iii Contents 1 Introduction to Pl_Editor 2 2 Pl_Editor files 2 2.1 Input file and default title block........................................ 2 2.2 Output
More informationAdjusting the view. Magnifying the page view. Working with large page sizes. Choosing a page layout for scrolling ease. Setting a default view
Adjusting the view Magnifying the page view Working with large page sizes Choosing a page layout for scrolling ease Setting a default view Reading documents in Full Screen view Choosing a Web browser for
More informationIntroducing Gupta Report Builder
Business Reporting Chapter 1 Introducing Gupta Report Builder You can use Report Builder to design reports. This chapter describes: Our approach to building reports. Some of the reports you can build.
More information