4 Control engineering
|
|
|
- Mercy Cameron
- 6 years ago
- Views:
Transcription
1 General safety precautions for electrical products Operate the respective product only as described in the operating instruction. Only authorized electricians are allowed to carry out any kind of maintenance work or technical service! It is absolutely necessary to ground all moulds! Cartridge heaters, Connecting power/signal cable, Microprocessor temperature s, Thermocouples, Pressure- and temperature measuring devices 4.01
2 Injection moulding machine with integrated piezo-pressure measuring system 4.02
3 Page New product Ordering example : Z 110 / 6,5 x 40 / 125 Cartridge heater Cartridge Cartridge length Watt Z 110 /...* 4.1 Cartridge heater cylindrical DIN Z 1167/ Protective earth line for grounding of moulds and Z 106 /... ; Z /... Z 1226 /...* 4.16 Power/signal adapter Conductor : Copper/ Fe-CuNi conforming to VDE 0100 Z 111/...* 4.6 Cartridge heater tapered with taper 1: 50 Z 1168 / Compensating line for thermocouples Fe-CuNi suitable for Z 101 and Z 1295 Z 1227/...* 4.17 Connection housing Pins : Brass / Fe-CuNi conforming to VDE 0100 Z 1133 / Heater band used for heating up of sprue bushing Z 1055 /... Z 122/1/1/ control circuit Z 1228 /...* 4.18 Connection housing Pins : Brass / Fe-CuNi conforming to VDE 0100 Z 1134 / Heater band with integrated thermocouple, same application as Z 1055 /... Z 122/1/2/ control circuits Z 1229 / Plug insert spare part for Z 1227/... and Z 1228 /... Z 116 /...* 4.8 Assembly set contains pliers, cables and connectors for electrical installations Z 122/1/4/ control circuits Z 128 / Coupling multi-polar design 230 V/10 Amp. Z 1161/...* 4.8 Extension cable for cartridge heaters and heated nozzles Z 122/1/6/ control circuits Z 1281/ Free connector DIN IEC Z 1162 /...* 4.9 Crimp type bracket DIN for electrical wiring Z 122/1/9/ control circuits max W /16 A Z 1295 / Thermocouple Mat.: Fe-CuNi Z 1165 /...* 4.9 Butt joint DIN for extenting of electrical cables Z 1224 / Socket insert spare part for Z 1225 /... and Z 1226 /... Z 1295 / Thermocouple Mat.: Fe-CuNi Z 1166 /...* 4.10 Cable end sleeve DIN for electrical wiring Z 1225 /...* 4.16 Power/signal cable Conductor : Copper/ Fe-CuNi plugs conform to VDE 0100 Z 1295 / Thermocouple Mat.: Fe-CuNi ** = For technical details please refer to INFO-section ** = Product to be phased out 4.03
4 Page Z 1296 / Z 1382 /...* 4.29 Z 1395 /...* 4.34 Coupling nipple used for Z 1295 / 3 for all pressure and force transducers max. 300 C Retaining plate Mat.: for Z 1381/... or Z 1382 /... Z 1297/ Z 1383 /...* 4.30 Z 1396 /...* 4.35 Fastening nipple used for Z 1295 / 5 for connecting of mould with Z 1384 / 1 and Z 1384 / 2 Spacer tube Mat.: Installation aid for pressure transducer Z 1370 /... Z 131/...* 4.22 Z 1384 /1 * 4.30 Z 1397/...* 4.35 Wiring box 250 V ~ used for prewiring of hotrunner moulds Charge amplifier for conversion of signals for the machine control system Mounting nut Mat.: for securing pressure transducer Z 1370 /... Z 1312 / Z 1385 /2 * 4.31 Z 1398 /...* 4.36 Thermal insul. sheet Mat.: Synthetic resin / Glass fibre = 0,13 W/mK used for Z 131/... Data converter for recording measurements including software Tubular wrench Mat.: for mounting of nut Z 1397/... Z 1370 /...* 4.27 Z 1387/...* 4.32 Z 1399 /...* 4.36 Pressure transducer for direct measurement of the cavity pressure for connecting of Z 1384 / 1 or Z 1384 / 2 with moulding maschine Insertion tool Mat.: for fitting Z 1381 /... with Z 1372 /... Z 1371/...* 4.27 Z 1391/...* 4.32 Z 140 / Measuring tongue Pressure transducer for indirect measurement of cavity pressure Dummy Mat.: installed if Z 1371 /... is not used Limit switch for electronic mouldsafety device Z 1372 /...* 4.28 Z 1392 /...* 4.33 Z 1401/ Miniature measuring tongue Pressure transducer for indirect measurement of cavity pressure Bracket Mat.: used with Z 1371/... and Z 1391/... with straight plug used for Z 140 /... and Z 1471/... ; Z 1473 /... ; Z 1475 /... Z 1373 /...* 4.28 Z 1393 /...* 4.33 Z 1402 / Force transducer for indirect measurement of the cavity pressure Dummy Mat.: installed if Z 1372 /... is not used with 90 -design plug used for Z 140 /... ; Z 1471 /... ; Z 1473 /... ; Z 1475 /... Z 1381/...* 4.29 Z 1394 /...* 4.34 Z 141/ for all pressure and force transducers max. 200 C Bracket Mat.: for mounting pipe Z 1399 /... Tester for checking /adjusting of Z 140 / ** = For technical details please refer to INFO-section ** = Product to be phased out
5 Page New product Z 145 /...* 4.39 Infrared 230 V ~ Z 1471/...* 4.44 Inductive proximity switch threaded max. 75 C Z 2511/...* 4.49 Temperature feeler used with Z 251/2 Z 1451/...* 4.40 Infrared transmitter 90 design Z 1473 /...* 4.44 Inductive proximity switch smooth max. 75 C Z 2512 /...* 4.49 Temperature feeler used with Z 251/2 Z 1452 /...* 4.40 Infrared receiver 90 design Z 1475 /...* 4.45 Inductive proximity switch square max. 75 C Z 2515 /...* 4.50 Temperature feeler used with Z 251/2 Z 1453 /...* 4.41 Infrared transmitter straight Z 1454 /...* 4.41 Infrared-receiver straight Z 240 /...* 4.46 Pneumatic for controlling of pneumatic operated fixtures Z 2401/ Rocker arm valve 3/2 ways valve for pneumatic circuits Z 252 /...* 4.50 Pocket temperature measuring device with multi-pupose feeler Z 1455 /...* 4.42 Bracket Mat.: for Z 1471/... or Z 1381/... Z 2411/ Lubro- with pressure adjustment, water separater filter and lubricator Z 1457/...* 4.42 Wiring box Z 2412 / Lubro- with pressure adjustment, and filter Z 1458 /...* 4.43 for connecting of Z 145 /... with Z 1457/... Z 2416 / Silencer spare part for Z 240 /... Z 1460 /...* 4.43 Thermal insul. sheet Mat.: synthetic resin / Glass fibre = 0,13 W/mK for Z 1457/... Z 251/2 * 4.48 Temperature measuring device used for surface and immers. measurements ** = For technical details please refer to INFO-section ** = Product to be phased out 4.05
6 .06
This is trial version
s, s, Shut-of nozzles, Needle valves, Hot runner manifold s and accessory 3.01 3.02 Page Ordering example : Z 51 / 18 x 27 / 3,5 Shaft Shaft length Bore Z50/... 3.2, blank 740 N/mm 2 Z51/...* 3.2 1 30
This is trial version
s, s, Ejector coupling devices, Unscrewing components, Two-stage ejectors, Latch locking units, Mould slides-modular system 2.01 2.02 Ordering example : Z 40 / 1,6 x 40 Shaft Overall length Z02/... 2.1
Valid for item nos.: (1-zone) (2-zone) (4-zone) (6-zone) HPS-C-Slot Hotrunner controllers Operating manual
Valid for item nos.: 68030.001 (1-zone) 68030.002 (2-zone) 68030.004 (4-zone) 68030.006 (6-zone) HPS-C-Slot Hotrunner controllers Operating manual 2 Content Safety instructions...3 Introduction...4 Operating
Connecting cables for valves, plug pattern ZC, metric screw Type codes
Type codes NEBV Z4 WA 2 L R E 5 N M8 G 3 S1 Function NEBV Connecting cables for valves Connection technology on left, field device side Z4 Socket, plug pattern ZC, metric screw Cable outlet left WA Angled
Miniature Push-Pull Series Atto Miniature Push-Pull
J Miniature Push-Pull Series Atto Miniature Push-Pull Technical Data Panel connector Cable connector Coupler connector Panel connector, cable connector and coupler connector circular housing Locking Push-Pull,
Repair Parts List DRYER MODEL NUMBER MDG50PNHWW. When requesting service or ordering parts, always provide the following information:
Repair Parts List DRYER MODEL NUMBER MDG50PNHWW When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005
05 - TKT // Thermocouples with a ceramic protection tube and a built-in thermocouple
05-TKT The 05 product group comprises ready-to-install large and small straight thermocouples with ceramic protection tubes and built-in thermocouples. The elements are used for technical temperature measurements
Model QRS CPVS
SPARE PARTS LIST EN CP COMPRESSOR Model QRS 0-5 - 0 CPVS 0-5 - 0 6 05 50 65 KEY - Door Panel: 655900 Lock - Door Panel: 005076 QRS 0 CONTENTS Title Page MAINTENANCE HOW TO READ THIS SPARE PART LIST? KIT
Radiator Lockshield Valves ADN.. AEN..
07 EN - Straight version ADN.. Angle version AEN.. ACVATIX TM Radiator Lockshield Valves ADN.. AEN.. for -pipe heating systems Valve bodies made of brass, mat nickel-plated DN 0, DN and DN 0 Integrated
Blower Purge Air Dryers
Blower Purge Air Dryers PB-250 to PB-750 Parts List November 2013 2 Table of contents 1 PB - 250... 4 2 PB - 325... 6 3 PB - 400... 8 4 PB - 500... 10 5 PB - 650... 12 6 PB - 750... 14 7 Control Panel...
LH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio
Forward and reversible plate Hatz Electric start 0 mm Hatz Electric start 0 mm Bio Hatz Electric start mm Bio Valid from serial number 0000 0000 0000 Contents Contents General information.....................................................................................................................................
Parts Manual Kleen Sweep 32R Rider Sweeper
Parts Manual Kleen Sweep 32R Page 2 Table of Contents Side broom R.H., part 1... Side broom R.H., part 2... Front wheel drive... Accelerator... Steering... Seat group... Group of main sweeper roller, part
LH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio
LH 00 Spare parts list Forward and reversible plate LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio Valid from serial
RD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No
RD 100 Spare parts list RD 100 s/n BES100496 2018 Construction Tools PC AB No. 9800153901 2018-10 General information This spare parts list applies to the following: Part number 8311030410 RD 100 Description
Compact Inductive Proximity Sensor
SERIES Compact Inductive Proximity Sensor Amplifier Built-in High functionality together with robust housing and flexible cable Miniature is an amplifier built-in inductive proximity sensor having a diameter
Repair Parts List DRYER MODEL NUMBER MDG75MNVWQ. When requesting service or ordering parts, always provide the following information:
Repair Parts List DRYER MODEL NUMBER MDG75MNVWQ When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005
The Polarization Cell Replacement (PCRH)
The Polarization Cell Replacement (PCRH) Installation Instructions Introduction The Polarization Cell Replacement for use in Hazardous Locations (PCRH) is a solid-state DC isolation/ac grounding (or coupling)
DEPARTMENT OF DEFENSE STANDARD PRACTICE ELECTRICAL CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF
DEPARTMENT OF DEFENSE STANDARD PRACTICE ELECTRICAL CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF RFConnector@dla.mil MIL-DTL-55302/190
Level sensor Stainless steel version Model RLT-1000, for industrial applications
Level measurement Level sensor Stainless steel version Model RLT-1000, for industrial applications WIKA data sheet LM 50.02 Applications Level measurement of liquids in machine building Control and monitoring
Emergency Luminaire for Fluorescent Lamps Series EXLUX 6009
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or
Parts / Spares Reference Sheet
Parts / Spares Reference Sheet Graco GMAX 5900 GMAX II 5900/5900HD Standard Series GMAX II 5900/5900HD Standard Series 0 28 22 30 2 5 38 4 46 6 37 50 9 45 2 20 45 43 8 0 52 05 23 40 27 38 5 3 32 33a 33b
CATALOGUE CAPACITIVE SENSORS KXS
CATALOGUE CAPACITIVE SENSORS KXS 2 For all transactions the newest version of "General Conditions of Sale and Delivery for Products and Services of the Electrical Industry ZVEI" shall apply, with the supplementary
Conductor and Cable Marking Description and Handling
Conductor and Cable Marking Description and Handling 566 Wire marking The following markers are available: Markers for plotter marking. Markers on roll for thermal transfer printing. Remove the printed
Temperature sensors and accessories for heat and cooling measurement points
Temperature sensors and accessories for heat and cooling measurement points Applications Temperature sensors are metrological components for heat or cold measuring points. They are used in pairs and measure
Operating Manual / IEC. Explosion-Proofed Junction Boxes, Polyester. Wallücker Bahndamm 7 DE Kirchlengern
Operating Manual / IEC Explosion-Proofed Junction Boxes, Polyester Wallücker Bahndamm 7 DE- 32278 Kirchlengern Tel.: +49 5223 49107-0 Fax: +49 5223 49107-28 info@multi-box.com www.multi-box.com Contents
FDS / FDS-R / FDS-PS
FDS / FDS-R / FDS-PS USER MANUAL For use with 120V 60Hz input. Output is 120V 60Hz at 5amps 600W MAX. switched. ETL LISTED Conforms to UL STD 1241 3091594 79-15167-00 REV. A www.fiberstars.com Page 1 of
8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
DMP 333 DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial
DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Industrial Pressure Transmitter DMP Nominal pressure
Proximity sensors, block design
Proximity sensors, block design Proximity sensors, block design Product range overview Measuring principle Version Type Mounting Switching element function Switching Electrical connection N/O contact N/C
GX SERIES. Cylindrical Compact Inductive Proximity Sensor Amplifier Built-in. Robust enclosure and flexible cable types are also available
8 Cylindrical Compact Inductive Proximity SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.86~ selection guide... P.757~ General precautions... P.05 PHOTO PHOTO Conforming
THERMASGARD TM 65. Immersion screw-in duct temperature measuring transducer, calibratable, with multi-range switching and active output TECHNICAL DATA
Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer THERMASGARD with eight switchable measuring ranges, continuous linear output, enclosure
Amphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1
Amphenol Miniature Cylindrical Proprietary/ PT PT-SE SP 3 DESIGN CHARACTERISTICS Medium size, widely used cylindrical Operating voltage to 1,000 VAC (RMS) at sea level Environment resistant Quick positive
LMP 308. Separable Stainless Steel Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO / 0.
LMP 08 Separable Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.25 % FSO / 0. % FSO Nominal pressure from 0... mh 2 O up to 0... 250 mh 2 O Output signals 2-wire:
Air gap sensors SOPA
Product range overview Key features General Lightweight, compact and highly precise, this pneumatic solution offers impressive scope for integration: SOPA features a control module, compressed air regulation,
Filtered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
Proximity sensors, block-shaped Product range overview
Proximity sensors, block-shaped Product range overview Measuring Version Type Assembly Switching element function Switch output Electricalconnection principle N/C contact Cable Plug Magneto- Operating
Atlas Copco. Dryers BD 480. Parts list. From following serial No. onwards: APF
Atlas Copco Dryers BD 480 Parts list From following serial No. onwards: APF 56 875 Copyright 0, Atlas Copco Airpower n.v., Antwerp, Belgium. Any unauthorized use or copying of the contents or any part
Product and Applications Description. Application Programs. Note. instabus EIB Technical Product Information. June 2005
Product and Applications Description Application Programs The application programs of the dimmer UP 525/01 consist of two elements: the actuating and the sensor program element. The tasks actuating program
Electrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
IDC Field Wireable eurofast & picofast Connectors
Advanced Connection Solutions for Manufacturers Worldwide! IDC Field Wireable eurofast & picofast Connectors picofast Field Wireable IDC Connector eurofast Field Wireable IDC Connector Overview Connection
Posi-Lok Plugs and Panels
THE SAFEST ELECTRICAL SYSTEM FOR HIGH AMPERAGE CONNECTIONS, POSI-LOK IS PART OF THE CAM-LOK FAMILY OF CONNECTORS. THE GROUND ALWAYS MAKES FIRST AND BREAKS LAST ALL POSI-LOK SYSTEMS ARE UL LISTED AND CSA
PHOENIX CONTACT - 01/2008
Ex Basic Terminal Blocks for Intrinsically Safe Signals With Knife Disconnection and Test Connections INTERFACE Data Sheet 102957_00_en PHOENIX CONTACT - 01/2008 1 Description PI-EX-TB and PI-EX-TB/T Ex
Industrial Wet/Wet Differential Pressure Transducer
Industrial Wet/Wet Differential Pressure Transducer With High Over Pressure Capacity mv/v Output 0-5 Vdc Output 4-20 ma Output Model MD1-002DV Model MB1-100DV L 735 Basic Unit 1 bar = 14.5 psi 1 kg/cm
Datasheet. Datasheet-No Type: RS(W)T(S) - RK(W)T(S) -.../ M. Page: 1 of 7
The information/details in this datasheet merely contain general descriptions or performance factors which, when applied in an actual situation, do not always correspond with the described form, and may
CONSOLE CONNECTOR KIT 9501 INSTALLATION INSTRUCTIONS
CONSOLE CONNECTOR KIT 9501 INSTALLATION INSTRUCTIONS FOR USE WITH: HAMMOND Organ Models L-100, M-100 Series, M-l, M-2, M-3 LESLIE Speaker Models 760, 770, 825 KIT CONTENT Console Connector Assembly 043075
PIONJÄR. Spare parts list. Petrol drills and breakers 120, 120 AV, 121 A, 130, 130 AV, 131 A
PIONJÄR 0, 0 AV, A, 0, 0 AV, A Spare parts list Petrol drills and breakers 0 Atlas Copco Construction Tools AB 00 00 0b 00 PIONJÄR 0, 0 AV, A, 0, 0 AV, A Contents Contents General Information................................................................
IP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
XW3B. Connector Terminal Boxes. Ratings and Specifications. Compatible Connectors. Materials and Finish
es XWB Series Includes New Lightweight, Low-profile Connector Terminal Boxes for Use Outside of Control Boxes to Centralize I/O with Reduced Labor and Greater Environmental Resistance Tough model with
MK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial
JL05 SERIES CONNECTORS
The J0 Series connectors conforms to JISB0 specifications. J0 is a circular, waterproof connector using IPF structure. There is a one-touch locking mechanism for ease in mating and unmating. With first-to-make/last-to-break
Pneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
Model 332 Differential Pressure Transmitter
Model Differential Pressure Transmitter USERS GUIDE Please read carefully before using. Manufactured by: FURNESS CONTROLS LIMITED Beeching Road, Bexhill, East Sussex, TN9 LJ, England. Telephone (044) 706
DIP. Spare parts list. Centrifugal pumps 25, 25-US, 35, 35-US, 65, 65-US Atlas Copco Construction Tools AB No c
DIP 5, 5US, 35, 35US, 65, 65US Spare parts list Centrifugal pumps 0 Atlas Copco Construction Tools AB No. 9800 5 0c 003 DIP 5, 5US, 35, 35US, 65, 65US Contents Contents General information................................................................
PureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
Standard Series Standard
Standard Series Standard Technical Data Coupler connector, cable connector and coupler connector rectangular housing Locking screw connection Protection IP 50 to IP 54 with conexil in the housing, flat-gasket
RA /2.95. Gear Pump Model G2 (Series 4X) For Flange Mounting with SAE threaded Ports. Functional description. Symbols
/2.9 Gear Pump Model G2 (Series X For Flange Mounting with SE threaded Ports s to 22... 6 PSI (2 bar....7 in /rev. (22. cm /rev. /2.9 eplaces: 2.92 New principle of sealing the pump body, increases service
Cylindrical Compact Inductive Proximity Sensor Amplifier Built-in. panasonic.net/id/pidsx/global
8 PHOTO PHOTO MEASURE Cylindrical Compact Inductive Proximity SERIES Related Information General terms and conditions... F- Glossary of terms... P.576~ panasonic.net/id/pidsx/global guide... P.78~ General
Photoelectric Sensor
Sensing Supply Voltage Output 3m 1.cm,2m 10cm 2 to 20 VAC, 0/60 Hz to200ma, 20 VAC 100 ma, 2 VDC Photoelectric Sensor Threaded Cylindrical M1 Size Sensors with Built-in Amplifier Chemical resistant, ABS
Removal and Installation8
8 Screw Types 8-4 Top Cover Assembly 8-5 Left Hand Cover 8-6 Right Hand Cover 8-10 Front Panel Assembly 8-14 Left Rear Cover 8-15 Right Rear Cover 8-16 Extension Cover (60" Model only) 8-17 Media Lever
10 - TMM // Thermocouples with a metal thermowell and a built-in sheath measurement insert
10 - TMM // Thermocouples with a metal thermowell and a built-in sheath measurement insert 10-TMM This product group comprises ready-to-install large and small straight thermocouples with built-in sheath
Ferrous metal (The sensing distance decreases with non-ferrous metal.) Power supply voltage (operating voltage range)
Description The sensors provide excellent results even with difficult-to-detect objects, e.g. small or thin parts, wires or bright metals. A variety of types cover a wide range of individual requirements
Pipe fittings and flanges, sockets for bayonet locks
Data Sheet 909750 (909725) Page 1/7 Pipe fittings and flanges, sockets for bayonet locks for temperatures up to 600 C for different fitting lengths simple installation and replacement pressure-tight sealing
Immersion Temperature Sensors
1 782 1782P01 Symaro Immersion Temperature Sensors QAE2164 QAE2174 Active sensors for acquiring the water temperature in pipes and tanks Operating voltage AC 24 V or DC 13535 V Signal output DC 010 V or
CONNECTOR AND RECEPTACLE WIRE/CABLE ASSEMBLY INSTRUCTIONS
CONNECTOR AND RECEPTACLE WIRE/CABLE ASSEMBLY INSTRUCTIONS Throughout this manual, look for this symbol. It means BE ALERT YOUR SAFETY IS INVOLVED. If you do not follow these safety instructions, personal
Digital electropneumatic positioner
Digital electropneumatic positioner Type 879 can be combined with Compact metal housing Graphic display with backlight Easy start-up Comprehensive range of additional software functions Profibus DPV1 (optional)
High-density multi-pin connectors
High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there
Round Water-resistant Connectors (M12) XS2
Round Water-resistant Connectors (M) XS Water- and Environment-resistive FA Connectors Save Wiring and Maintenance Effort Compact FA connectors satisfy IP67 requirements and ensure a 9V-0 fire retardant
Inductive sensor with analog output BI15-M30-LI-EXI
ATEX category II 1 G, Ex-zone 0 ATEX category II 2 D, Ex-zone 21 Threaded barrel, M30 x 1.5 Chrome-plated brass Analog+ Extended operating range 2-wire, 14 30 VDC Analog output 4 20 ma Cable connection
ODU MINI-SNAP PC Product Description. ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic
ODU MINI-SNAP PC Product Description ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic Cylindrical Connectors are generally available with several locking mechanisms: The most frequently
nano ultrasonic sensors Extract from our online catalogue: Current to:
Extract from our online catalogue: Current to: 2018-09-13 microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E info@microsonic.de microsonic is
SPARE PARTS LIST CP COMPRESSOR. Model CPD CPD 75
SPARE PARTS LIST CP COMPRESSOR Model CPD 75-00 EN 05 0 5 CPD 75 CONTENTS Title Page MAINTENANCE HOW TO READ THIS SPARE PART LIST? MAINTENANCE KITS STANDARD UNITS MOTOR-COMPRESSOR UNIT -7 AIR CIRCUIT -9
IECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: IECEx BKI 07.0001X issue No.:1
VMEbus systems System description Technical characteristics System description
Directory chapter 06 / inverse Page VMEbus systems................................................ 06.02 System description.............................................. 06.03 Technical characteristics..........................................
Pressure sensors SDE1, with display
Product range overview Method of measurement Piezoresistive pressure sensor with display Operating voltage Measured variable Pressure measuring range Pneumatic connection Type of mounting Electrical output
Optical distance sensors. Dimensioned drawing
Optical distance sensors Dimensioned drawing en 03-2012/11 50110829 120 1400mm 18-30 V DC We reserve the right to make changes DS_ODS96BMV61400S12_en_50110829.fm Reflection-independent distance information
Assembling and testing electronic circuits. Outcome one
006 UNIT 036 Assembling and testing electronic circuits Learning outcomes 1 2 Know how to assemble and test electronic circuits Performance evidence must be the main form of evidence gathered. Candidates
97100 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: /4 (ISO G or NPT), NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve >
CROWN LINE Power Bus Bar Distribution System
COWN LINE Power Bus Bar Distribution System COWN LINE Power Bus Bar Distribution System The pluggable bus bar system Currents up to 300 Amps Up to 2 meters in length Pluggable breakers VDE finger proof
ADAPTERS AMPLIFIERS ATTENUATORS DIAL ADAPTERS GONG ATTACHMENTS MAGNETIC AMPLIFIERS TRANMITTER ARMS TRANSMITTER ATTACHMENTS
Table of Contents A... 2 B... 2 C... 3 D... 4 E... 4 F... 4 G... 4 H... 4 I... 5 J... 5 K... 5 L... 6 M... 6 N... 6 O... 7 P... 7 R... 7 S... 8 T... 9 U... 10 V... 10 W... 10 A ADAPTERS AMPLIFIERS ATTENUATORS
ERNIPRESS Trapezoidal-Connectors Series TMC
ERNIPRESS Trapezoidal-Connectors Series TMC Subminiatur-D Connectors to DIN 41 652/IEC 807-3 with Press-fit zone General Solderless press-in technology for connectors in bus systems permits rationalized
Digital electropneumatic positioner
Digital electropneumatic positioner Type 879 can be combined with Compact metal housing Graphic display with backlight Easy start-up Comprehensive range of additional software functions Profibus DPV1 (optional)
Transparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling
Transparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling 572 Assembly Application Snapping a cover carrier onto the carrier rail. Application examples: cover
COBRA. Spare parts list. Petrol drills and breakers COMBI Atlas Copco Construction Tools AB No c
COBRA COMBI Spare parts list Petrol drills and breakers 0 Atlas Copco Construction Tools AB 00 0 0c 00 COBRA COMBI Contents Contents General information................................................................
ODU AMC HIGH-DENSITY RECEPTACLE STYLE 6 ASSEMBLY INSTRUCTION
1 Assembly sequence max. cable mm 00 (C) 5.0 0 7.0 1 8.5 1.5 (A) 10.5 Plug Crimp adapter Crimp sleeve Note: Cable with foil shield such as foiled twisted pair-cable (FTP) not suitable for shield termination
Spare Parts List Hydraulic Hammer. HM 720 Eco (V)
Spare Parts List Hydraulic Hammer HM 720 Eco (V) Pt. Id. No. 3361 8557 11 Valid from: 09/2003 GB Spare Parts List Hydraulic Hammers HM 720 Eco HM 720 Eco V E Atlas Copco Construction Tools GmbH Atlas
E2K-X4ME1 2M E2K-X4ME2 2M
Cylindrical Proximity Sensor EK- CSM_EK-_DS_E 1 General-purpose Threaded Sensor That Detects Metals and Non-metals Alike Detects both metallic and nonmetallic objects (water, oil, glass, plastic, etc.).
nano ultrasonic sensors Extract from our online catalogue: Current to:
Extract from our online catalogue: nano ultrasonic sensors Current to: 2013-07-30 microsonic gmbh, hauert 16, d-44227 dortmund, telephone: +49 231 975151-0, fax: +49 231 975151-51, e-mail: info@microsonic.de
Power Transducers. Measuring most electrical parameters
Measuring most electrical parameters Wide range of power measuring transducers including AC volts, AC current, power factor, watts, vars and phase angles measurements. Multi power monitor has output options
WIFI TOUCH PANEL WALL CONTROL F-TS
WIFI TOUCH PANEL WALL CONTROL F-TS T INSTALLATION INSTRUCTIONS DC WET MOTOR SMART works with the Google Assistant OVERVIEW For the best results with your WIFI Touch Panel wall control, please read these
poles type cable gland type or connection color approvals order no.
DIN 43650-A/ISO 4400 GDM Series Cable socket, self-assembly Product description durable angled connectors, dust and splash protected (IEC 60529 IP 65) vibration-proof locking using a central screw available
Smart Multivariable Transmitter (SMV 3000) Electronics Module Replacement Kit Instruction
Smart Multivariable Transmitter (SMV 3000) Electronics Module Replacement Kit Instruction Electronics Module (Part number 51404208 503, -513) Document Form: 34-SM-33-01 Effective: 09-01 Supersedes: 34-SM-33-01,
Positive-guided relay outputs: 4 safety contacts (N/O), instantaneous
Contact expander module for increasing the number of available contacts Approvals Unit features Positive-guided relay outputs: 4 safety contacts (N/O), instantaneous LED indicator for: Switch status channel
ELECTRIC ON-OFF JOYSTICK SERIES JEO
1 Index of content: Page Description: 3 Technical data: 4 Dimensional data: 5-6-7 Kinematic mechanism configuration: 8 Electric circuit configuration: 9-10 Protection boots: 11 Ordering key: 12 2 Descripton:
Pneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
µcom-10gb + MAIN FEATURES FEATURES AND BENEFITS MARKETS & APPLICATIONS Harsh Environment 10Gb Ethernet Micro Connectors Amphenol Socapex
Harsh Environment 10Gb Ethernet Micro Connectors 15mm µcom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the highest resistance
VM series. features. web contents. code description. available models. inductive sensors. Cylindrical M12 in AC B H
VM series Cylindrical M2 in AC inductive sensors warranty features warranty Output: cable and M2 plug cable exit Models with 2 wires IP67 protection degree Multivoltage 20...253 Vac web contents Application
Spare parts list. Forward and reversible plate MV Valid from serial number. MV 500 Hatz Electric start 850 mm
Spare parts list Forward and reversible plate MV 00 MV 00 Hatz Electric start 0 mm Valid from serial number BGF00000 www.cp.com MV 00 00 0 0 MV 00 Contents Contents General information...............................................................
Temperature Measurement SITRANS TS300
Siemens AG 018 For food, pharmaceuticals and biotechnology modular design Dimensional drawings Cable gland M1x1.5 for cable Ø 3... 6.5 (0.1... 0.6) Ø 60 (.36) Ø d = N + H 1 Ø 50.5 (1.99) U X H 1 N H Ø
MI-4 Melt Flow Indexer
Göttfert Werkstoff-Prüfmaschinen GmbH Siemensstraße 2 74722 Buchen E-Mail: info@goettfert.de Internet: http://www.goettfert.com WERKSTOFF-PRÜFMASCHINEN GMBH MI-4 Melt Flow Indexer This unique melt indexer
Operating pressure (bar)
/ poppet valves electromagnetic actuated, directly controlled G /4, /4 NPT, G /, / NPT or flanged with NAMUR Interface Main application: single operated actuators for plants Valves for safety systems up