MEB COMPUTER INTEGRATED MANUFACTURING. Unit - I Part - A
|
|
- Dana Warren
- 5 years ago
- Views:
Transcription
1 MEB COMPUTER INTEGRATED MANUFACTURING One Mark Questions: Unit - I 1. What is meant by CIM? 2. Define: CAD 3. What are the different types of CAD system? 4. What is meant by graphic workstation? 5. Define: Geometric modeling. 6. List the CAD application software. 7. List the operating software. 8. What is meant by translation? 9. What is meant by scaling? 10. What us meant by concatenation? 12. Write the transformation matrix for 2D and 3D translation. 13. Write the transformation matrix for 2D and 3D rotation. 14. Write the transformation matrix for 2D and 3D scaling. 15. List the geometric modeling techniques. 16. What is meant by wire frame model? 17. What is meant by surface model? 18. What is meant by solid model? 19. List the solid modeling methods. 20. What is meant by graphic standard? 21. Expand IGES and PHIGS. 22. What is meant by DFX? 23. What is meant by DFM? 24. What is meant by DFA? 25. Define: FEM. 26. List the Boolean operations used in CSG. 27. List the common graphic standards used in CAD/CAM applications. 28. List the CAD hardware. 29. List the entities used in wire frame modeling. 30. List the surface features used in surface. 31. List out applications of surface modeling. 32. List the applications of solid modeling. 33. List the disadvantages of IGES. 1. Explain the concept of CIM 2. Draw the CIM wheel and explain 3. What are the benefits of CIM? 4. What is meant by integrated CAD/CAM? Explain. 5. Explain Shigley s design process. 6. Explain the activities of CAD.
2 7. List the benefits of CAD. 8. List the functions of graphic workstation. 9. Explain 2D and 3D translation. 10. Explain 2D and 3D rotation. 11. Explain 2D and 3D scaling. 12. Explain wire frame modeling 13. List the advantages and disadvantages of wire surface model. 14. Explain surface modeling. 15. List the advantages and disadvantages of surface model. 16. Explain solid modeling. 17. Explain CSG and B-rep approaches of solid modeling. 18. List the advantages and disadvantages of solid models. 19. What is the need for graphic standard? (or) List the benefits of graphic standards. 20. Explain in details about GKS. 21. Explain in details IGES methodology. 22. Explain in details PHIGS. 23. Explain in details about DXF. 24. Discuss in details about DFM guide lines. 25. Discuss in details about DFA guide lines. 26. Explain the basic steps involved in FEM. 27. What are the advantages and disadvantages of FEM?
3 One Mark Questions: Unit - II 1. Define: CAM 2. List major functions of CAM. 3. What is meant by group technology? 4. Define: Part family 5. What are the methods of forming part family? 6. Define: Process planning. 7. Define: Computer aided process planning. 8. What are the types of CAPP? 9. What is coding structures? 10. What are the types coding structures? 11. What is meant by production planning and control? 12. What is master production schedule? 13. What is meant by capacity planning? 14. What is meant by material requirement planning? 15. Define: Manufacturing resources planning. 16. What is meant by shop floor control? 17. Define: JIT manufacturing philosophy. 18. List the objectives of JIT. 19. List the goals of JIT. 20. Define: Product development cycle. 21. Define: Rapid prototyping. 22. List the materials used in SLA. 23. List the materials used in laser sintering 24. List the materials used in FDM. 25. List the materials used in 3D printing. 1. Discuss in details about functions of CAM. 2. List the benefits of CAM. 3. What are the methods of forming part family? Explain. 4. Discuss in details about parts classification and coding. 5. Explain optiz classification and coding system. 6. Explain the different types of coding structures. 7. Explain MICLASS classifications and coding system. 8. Discuss in details about CODE system. 9. What are the advantages and limitations of GT? 10. What is meant by process planning? 11. List the data s required for process planning. 12. Explain different types of CAPP 13. List the advantages of CAPP. 14. Discuss in details about production planning and control. 15. Explain about master production schedule.
4 16. Explain about capacity planning. 17. Discuss in details about MRP. 18. List the input to the MRP software. 19. List the output to the MRP software. 20. What are the benefits of MRP system? 21. Explain MRP - II. 22. Explain SFC. 23. Discuss in details about JIT. 24. What is meant by ERP? Explain. 25. Discuss about product development cycle. 26. Explain a).sequential engineering b). Concurrent engineering 27. Discuss the basic steps involved in RP process. 28. What are the different types of RP process? 29.With neat sketch explain the SLA process. 30. List the applications, advantages and disadvantages of SLA process. 31. With neat sketch explain the laser sintering process. 32. List the applications, advantages and disadvantages of laser sintering. 33. With neat sketch explain the FDM process. 34. List out applications, advantages and disadvantages of FDM process. 35. With neat sketch explain the 3D printing. 36. List the applications, advantages and disadvantages of 3D printing.
5 One Mark Questions: Unit - III 1. Define: NC 2. Define: CNC 3. Define: DNC 4. List the components of NC system 5. List the components of CNC system 6. List the components of DNC system 7. List the functions of CNC system 8. List the functions of DNC system 9. What is meant by adaptive control? 10. List the functions performed by adaptive control 11. Draw the axis convention for turning centre. 12. Draw the axis convention for machining centre. 13. What are the types of turning centers? 14. What are the types of machining centers? 15. What is the principle of EDM machine? 16. What is CMM? 17. What are the types of spindle drives? 18. What are the types of feed divers? 19. What is stepping motor? 20. What is servo motor? 21. List the component of hydraulic drive system. 22. List the types of slide ways. 23. What is meant by tool ATC? 24. What is meant by tool magazine? 25. List the feed back devices used in CNC machines. 26. What is meant by in process probing? 27. What is meant by transducers? 28. What is encoder? 29. List any two antifriction linear motion slide ways. 30. Mention the types of slide ways. 31. What is the purpose of using ATC in CNC machine? 32. List the tool material used in EDM process. 33. List the dielectric fluid used in EDM process 34. What are the types of DC motors? 35. What is the feed back device? 1. Explain the working of NC system with suitable line diagram. 2. Explain the CNC system with suitable line diagram. 3. Explain the DNC system with suitable line diagram. 4. List the difference between NC and CNC system. 5. List the advantages and disadvantages of NC machine.
6 6. List the applications of NC system. 7. List the advantages of CNC system. 8. List the advantages of DNC system. 9. Explain adaptive control system. 10. Briefly explain the salient features of turning centre. 11. Briefly explain the salient features of machining centre. 12. Explain the working of CNC EDM die sinking machine. 13. Explain the working of CNC wire EDM machine. 14. List the advantage and advantages of EDM process. 15. Explain the construction and working of CMM 16. List the different configuration of CMM 17. List the requirements of spindle drive motors. 18. Explain any one type of CNC machine spindle drive. 19. List the requirements of feed drives. 20. Explain servo drive used in CNC machine. 21. Explain stepping motor. 22. Explain hydraulic drive system 23. List the advantages of hydraulic drives. 24. List the requirements of slide ways. 25. Explain linear motion bearings. 26. Explain recirculation ball screw used in CNC machine. 27. What are the advantages of linear motion bearings? 28. What are the advantages of recirculation ball screw? 29. Explain the working of rotary transducer (encoder). 30. Explain the working of linear transducer. 31. What is meant by in process probing? Explain. 32. List the advantages of in process probing. 33. Explain the working of ATC. 34. Explain the tool magazine.
7 One Mark Questions: Unit - IV 1. Define part program. 2. List different methods of programming 3. What is meant by Format? 4. List the different types of format. 5. What is the significance of co-ordinate system? 6. Define machine zero point. 7. Define work piece zero point. 8. What is meant by home position? 9. What is Interpolation? 10. List the different types if interpolation. 11. Define circular interpolation. 12. Define absolute dimensioning. 13. Define relative dimensioning. 14. What are preparatory functions? 15. What are miscellaneous functions? 16. Name four G-codes and their functions for turning. 17. Name four M-codes and their functions for milling. 18. Define sub-routing. 19. Define canned cycle. 20. What is meant by mirroring? 1. What is a part program? Explain the structure of a part program. 2. Explain zero point and reference point. 3. Explain manual part programming. 4. Explain in detail the NC co-ordinate system 5. Distinguish between absolute dimensioning and incremental dimensioning. 6. What are G-codes and M-codes? Give at least 5 examples for each. 7. Explain the concept of conversational programming. 8. Explain the method of APT programming. 9. What is interpolation? List the different types of interpolation. 10. Explain the use of canned cycle in programming. 11. Briefly explain the concept of subroutine. 12. Briefly explain the concept of mirroring. 13. Explain in detail, the different types of Format 14. Write a part program for drilling 12 holes of dia 10mm in 3 rows and 4 columns on a billet of size 100mm 80mm 10mm. The distance between the rows is 25mm and that of columns is 30mm.
8 One Mark Questions: Unit - IV 1. Define FMS 2. What are the components, of FMS? 3. What is meant by FMS layout? 4. List the different types of FMS layout. 5. Define flexible manufacturing cell. 6. Define flexible turning cell. 7. Define AGV. 8. Give a list of different types AVGs. 9. Expand ASRS. 10. Define Robot. 11. Give different configurations of Robot. 12. Name different Robot programming methods. 13. State the functions of a sensor in the Robot. 14. What are the different types of sensors? 15. State the applications of a Robot. 16. An FMS is versatile - Why? 17. An FMS is Adaptable - How? 1. Explain in detail, the different components of FMS. 2. What are FMS layouts? Explain the different layouts? 3. Write short notes of a. Flexible Manufacturing cell b. Flexible Manufacturing system c. Flexible turning cell d. Intelligent manufacturing system e. ASRS f. Computer integrated material handling. 4. Define AGV. Explain the working of an AGV 5. Explain the different types of AGV. 6. State the benefits of AGV. 7. Explain the different configurations of Robot. 8. Explain the different methods of programming for a Robot. 9. Write short notes on Robot sensors. 10.State the applications of Robot.
INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad
INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad -500 043 Course Name : CAD CAM Course Code : A0328 Class : IV B. Tech I Semester MECHANICAL ENGINEERING TUTORIAL QUESTION BANK Branch
More informationINSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad
INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad-500043 MECHANICAL ENGINEERING ASSIGNMENT QUESTIONS Title Code Class Structure Coordinator Team of Instructors CAD/CAM A70328-R15 IV
More informationComputer Aided Engineering Applications 3. Advanced Manufacturing 3.5 NC programming 3.6 Automated Manufacturing systems 3.7 Rapid prototyping
Computer Aided Engineering Applications 3. Advanced Manufacturing 3.5 NC programming 3.6 Automated Manufacturing systems 3.7 Rapid prototyping Engi 6928 - Fall 2014 3.5 Part programming Structure of an
More informationChapter 1 Introduction to Numerically Controlled Machines
Chapter 1 Introduction to Numerically Controlled Machines The primary building blocks of flexible manufacturing and computer integrated manufacturing systems are numerically controlled (CNC) machine tools.
More information2. INTRODUCTION TO CNC
Q. Define NC Machines. 2. INTRODUCTION TO CNC A method of automation, in which various functions and processing of machine tools are controlled by letters and symbols. The general objective of NC technology
More informationManufacturing Processes with the Aid of CAD/CAM Systems AMEM 405
AMEM 405 slide 1 Manufacturing Processes with the Aid of CAD/CAM Systems AMEM 405 Dr. Sotiris Omirou AMEM 405 slide 2 CONTENTS 1. CAD/CAM definition 2. Review of Milling Process 3. Know The CNC Machine
More informationSOFTWARE. CAD/CAM software. Interpreter software. Programming software. Software and control organization isy-cam 2.5 PLUS...
SOFTWARE Software and control organization... 4-2 CAD/CAM isy-cam 2.5 PLUS... 4-4 Interpreter Remote... 4-5 Programming... 4-6 PAL-PC 2.1... 4-7 Software and controller organisation Software and controller
More informationCAD/CAM DESIGN TOOLS. Software supplied with all new and upgraded Boxford Lathes, Mills and Routers
CAD/CAM DESIGN TOOLS Software supplied with all new and upgraded Boxford Lathes, Mills and Routers The Boxford CAD/CAM Design Tools software is a unique suite of integrated CAD and CAM tools designed specifically
More informationDaVinci Systems. Features Machine Specifications And Bid Proposals
DaVinci Systems Features Machine Specifications And Bid Proposals Chapter Three Catalog Numbers DaVinci 8x8: HL33SBME242500 DaVinci 8x10: HL33SBME242510 DaVinci 10x12: HL33SBME242512 DaVinci 14x19: HX33VBME242201
More informationSOFTWARE. CAD / CAM-Software. Interpreter software. Programming software. Software and control organization... D-2. isy-cam D-4. Remote...
SOFTWARE Software and control organization... D-2 CAD / CAM-Software isy-cam 2.8... D-4 Interpreter Remote... D-6 Programming... D-7 Software and controller organisation Software and controller organisation
More informationMANUFACTURING PROCESSES
MANUFACTURING PROCESSES - AMEM 201 Lecture 7: CNC MACHINE TOOLS 1 CNC MACHINE TOOLS TERMINOLOGY NC Numerical Control CNC Computer Numerical Control CAD Computer Aided Design CAM Computer Aided Manufacturing
More informationsoftware isy-cam 2.8 and 3.6 CAD/CAM software Features isy-cam 2.8 Features isy-cam 3.6 D-4 CAD functionality (without volume modeller)
CAD/CAM isy-cam 2.8 and 3.6 isy-cam 2.8 CAD functionality (without volume modeller) works with Win XP, Windows 7 and 8, 32-/64-bit version Import: DXF / EPS / AI / 3D STL data Export: NCP format proven
More informationMILL CONTROL. Industrial Motion Control. Control Software Features. Alexsys - Conversational Assistant
Control Software Features MILL CONTROL Industrial Motion Control Configurable for any size knee mill, bed mill, (VMC/HMC) vertical or horizontal machining center, and large horizontal boring mill Large
More informationThe 8 th International Scientific Conference elearning and software for Education Bucharest, April 26-27, / X
The 8 th International Scientific Conference elearning and software for Education Bucharest, April 26-27, 2012 10.5682/2066-026X-12-168 MODERN CAD/CAM APPLICATIONS- INTUITIVE AND EFFICIENT Adrian BUT "Politehnica"
More informationReverse Engineering: Mechanical. Dr. Tarek A. Tutunji
Reverse Engineering: Mechanical Dr. Tarek A. Tutunji Mechanical RE References: 1. RE (reverse engineering) as necessary phase by rapid product development by Sokovic and Kopac 2. A Practical Appreciation
More informationCIM CIM. db-tech TRAINING OBJECTIVE: Students are expected to be knowledgeable in COMPUTER INTEGRATED MANUFACTURING
Computer Integrated Manufacturing Our CIM systems are modular flexible solutions for educating training students in the principles technologies of computer integrated manufacturing. CIM TRAINING OBJECTIVE:
More informationEML 2322L -- MAE Design and Manufacturing Laboratory. CNC Machining
EML 2322L -- MAE Design and Manufacturing Laboratory CNC Machining Intro to CNC Machining CNC stands for computer numeric controlled. It refers to any machine tool (i.e. mill, lathe, drill press, etc.)
More informationCOMPUTER AIDED DESIGN-COMPUTER AIDED MANUFACTURING
COMPUTER AIDED DESIGN-COMPUTER AIDED MANUFACTURING Subject code: A708 Regulations: R-JNTUH Class: IV Year B. Tech MECH I Sem Department of Mechanical Engineering BHARAT INSTITUTE OF ENGINEERING AND TECHNOLOGY
More informationUp to 4-axis plus closed-loop spindle Conversational and G-Code programming in one control Systems for knee mills, bed mills and VMC s USB interface
Up to 4-axis plus closed-loop spindle Conversational and G-Code programming in one control Systems for knee mills, bed mills and VMC s USB interface Acu-Rite 3500i boosts efficiency, versatility, touch
More information9000 CNC 9000 CNC: THE NEW STANDARD OF CONTROL. INTUITIVE EFFICIENT PRODUCTIVE
3D Solid Model Graphics Solid Model with Tool Path Overlay 9000 CNC 9000 CNC: THE NEW STANDARD OF CONTROL. At Milltronics we are constantly refining our controls to simplify operation, shorten setup times
More informationMIT DIPLOMA IN COMPUTER INTEGRATED MANUFACTURE (LEVEL 5) MN COURSE INFORMATION
CNC Programming Course Code: 22910 To develop CNC programming procedures for machining centres and turning centres. Anyone with an interest in the programming of CNC machinery or in the CAD/CAM industry.
More informationMachine Tool Products. Siemens SINUMERIK 828 CNC Kit. for. Knee Mills
Machine Tool Products Siemens SINUMERIK 828 CNC Kit for Knee Mills Revised: 08/22/2018 For more information or to request a quote please contact: MTP Support Email: support@machinetoolproducts.com Cell:
More informationSOFTWARE. CAD / CAM software. Interpreter software. Programming software. Software and control organization... D-2
SOFTWARE Software and control organization... D-2 CAD / CAM isy-cam 2.8... D-4 OneCNC... D-5 Mastercam... D-5 Interpreter Remote... D-6 Programming PAL-PC 2.1... D-7 ProNC... D-8 CAD/CAM OneCNC milling
More informationOF MECHANICAL ENGINERING COMPUTER INEGRATED MANUFACTURING SYSTEMS 8ME1A
Solution of Midterm as Follows BHARTIYA INSTITUTE OF ENGINEERING &TECHNOLOGY,SIKAR Q1.(A) Explain the role of computer in manufacturing? Ans: Computer based control systems can be combined with manufacturing
More informationIntroduction to CAD/CAM/CAE
Introduction to CAD/CAM/CAE Introduction CAD(Computer Aided Design) CAM(Computer Aided Manufacturing) CAE(Computer Aided Engineering) Memory capacity, processing speed, Interactive graphics Quality, Cost,
More informationGENIO CAD/CAM software powered by Autodesk technology for parametric programming of boring, routing and edge-banding work centers Genio SPAI SOFTWARE
GENIO CAD/CAM software powered by Autodesk technology for parametric programming of boring, routing and edge-banding work centers Overview is a powerful CAD/CAM system powered by Autodesk 3D environment
More informationGITAM. Skill Development Centre. Computer Aided Engineering UNIVERSITY H Y D E R A B A D. (Estd.u/s 3 of the UGC, 1956)
GITAM Skill Development Centre Computer Aided Engineering A University Committed to Excellence Modeling and Analysis Software tools Creo (Pro/ENGINEER) : Creo is a powerful 3D CAD solutions package optimized
More informationComputers & related hardware in the factory floor. Computers in The Factory Floor
LECTURE #4 Computers & related hardware in the factory floor Computers in The Factory Floor Numerical control NC machines Computerized numerical control Direct numerical control Distributed numerical control
More informationIndustrial Automation (Automação de Processos Industriais)
MEEC 2011-2012 Industrial Automation (Automação de Processos Industriais) http://users.isr.ist.utl.pt/~jag/courses/api1112/api1112.html Slides 2010/2011 Prof. Paulo Jorge Oliveira Rev. 2011/2012 Prof.
More informationIndustrial Automation (Automação de Processos Industriais)
Industrial Automation (Automação de Processos Industriais) http://users.isr.ist.utl.pt/~jag/courses/api1213/api1213.html Slides 2010/2011 Prof. Paulo Jorge Oliveira Rev. 2011-2013 Prof. José Gaspar Page
More informationApplication Case. Application: Delta s AC Servo System on Robot Arms for CNC Machine Tools. Issued by Solution Center Date March 2013 Pages 5
Case Application: Delta s AC Servo System on Robot Arms for CNC Machine Tools Issued by Solution Center Date March 2013 Pages 5 Applicable to Delta s AC Servo Drives and Motors Key words Servo System,
More informationCNC MACHINE CONTROLLER
CNC MACHINE CONTROLLER PERFECT CNC SOLUTION FOR MACHINE TOOLS INDUSTRY USB AC MAIN SUPPLY RS485 COMMUNICATION RS232 COMMUNICATION EMG SMPS I/O Module MPG XYZ Structure Spindle Encoder Spindle System TURNING
More informationDemonstration -3D Printer -CNC Milling Machine
Demonstration -3D Printer -CNC Milling Machine ENGINEERING LABORATORY EE-100 Lahore University of Management Sciences Electrical Engineering Department, SSE Non-conventional Manufacturing 3D Printing A
More information(Refer Slide Time: 00:01:27 min)
Computer Aided Design Prof. Dr. Anoop Chawla Department of Mechanical engineering Indian Institute of Technology, Delhi Lecture No. # 01 An Introduction to CAD Today we are basically going to introduce
More informationChapter 9 3D Modeling
Chapter 9 3D Modeling Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display. 3D Modeling Snapshot Since Mid 1980 s become common place in industry Software Types Wireframe
More informationCOMPUTER NUMERICAL CONTROL OF MACHINE TOOLS
COMPUTER NUMERICAL CONTROL OF MACHINE TOOLS Department of Mechanical Engineering and Aeronautics University of Patras, Greece Dr. Dimitris Mourtzis Associate professor Patras, 2017 1/52 Chapter 8: Two
More informationGeometric Modeling. Introduction
Geometric Modeling Introduction Geometric modeling is as important to CAD as governing equilibrium equations to classical engineering fields as mechanics and thermal fluids. intelligent decision on the
More informationSoftware designed to work seamlessly with your CNC Masters machine. Made to work with Windows PC. Works with standard USB
Software designed to work seamlessly with your CNC Masters machine Made to work with Windows PC Works with standard USB Clutter free interface. The software is engineered for the machine so you don t have
More informationUNIT IV - Laser and advances in Metrology 2 MARKS
UNIT IV - Laser and advances in Metrology 2 MARKS 81. What is interferometer? Interferometer is optical instruments used for measuring flatness and determining the lengths of slip gauges by direct reference
More informationThe PTC Creo Suite of NC and Tooling Solutions
The PTC Creo Suite What you need to capitalize on global manufacturing excellence of NC and Tooling Solutions To gain a competitive edge in product development, companies are increasingly leveraging globally
More informationPolar coordinate interpolation function G12.1
Polar coordinate interpolation function G12.1 On a Turning Center that is equipped with a rotary axis (C-axis), interpolation between the linear axis X and the rotary axis C is possible by use of the G12.1-function.
More informationA-SERIES BED MILLS. 3-Axis CNC for Job Shops, Tool Rooms, and Production Operations. Featuring Semi-Automatic + Conversational Programming + G-Code
A-SERIES BED MILLS 3-Axis CNC for Job Shops, Tool Rooms, and Production Operations Featuring Semi-Automatic + Conversational Programming + G-Code A-Series Bed Mills are offered in two styles: NC HEAD The
More informationDolphin 3DCAM Help. Copyright <2018> by <Dolphin Cadcam Systems Ltd>. V All Rights Reserved.
Copyright by . V1.020216 All Rights Reserved. Table of Contents Introduction... 3 Getting Started... 4 The Ribbon Toolbar... 5 File... 6 Geom... 9 Solids... 24 View...
More informationINDU411 Computer Integrated Manufacturing Lab Manual
INDU411 Computer Integrated Manufacturing Lab Manual JULY 2009 Onur Kuzgunkaya Gilles Huard Brad Luckhart Iman Niroomand INDU 411 Computer Integrated Manufacturing Lab Manual Table of Contents: Table of
More informationCopyright Warning & Restrictions
Copyright Warning & Restrictions The copyright law of the United States (Title 17, United States Code) governs the making of photocopies or other reproductions of copyrighted material. Under certain conditions
More informationKA3-6VS 300mm KA3-6VS 400mm Vertical Spindle
Vertical KA3-6VS 300mm KA3-6VS 400mm Vertical Spindle The Kira KA3- Series of traveling column (3) Axis CNC Machining Modules are an excellent choice for special application machine builders. These modules
More informationProgramming Features PERFORMANCE & SPECIFICATIONS
PERFORMANCE & SPECIFICATIONS Essentials Processor Intel Pentium Instruction Set 32-bit Performance Number of Cores 1 Processor Base Frequency 1.8 GHz Memory Data Storage 1 GB System Memory Installed 2
More informationReconfigurable Mechanisms for Application Control (RMAC): Applications
549 Reconfigurable Mechanisms for Application Control (RMAC): Applications Wei Li 1, Edward Red 2, Greg Jensen 3 and Mark Evans 4 1 General Motors, China, weili109@yahoo.com 2 Brigham Young University,
More informationMachine Tool Products. Siemens SINUMERIK 828 CNC Kit. for. Large-Small Bed Mills. (6Nm/12Nm)
Machine Tool Products Siemens SINUMERIK 828 CNC Kit for Large-Small Bed Mills (6Nm/12Nm) Revised: 10/08/2018 For more information or to request a quote please contact: MTP Support Email: support@machinetoolproducts.com
More informationL1 - Introduction. Contents. Introduction of CAD/CAM system Components of CAD/CAM systems Basic concepts of graphics programming
L1 - Introduction Contents Introduction of CAD/CAM system Components of CAD/CAM systems Basic concepts of graphics programming 1 Definitions Computer-Aided Design (CAD) The technology concerned with the
More informationFixed Headstock Type CNC Automatic Lathe
Fixed Headstock Type CNC Automatic Lathe MSY Configured with two spindles and one turret and equipped with a Y axis and X2 axis, the BNA42MSY is able to handle complex machining, with short cycle times
More informationTHE FACTORY AUTOMATION COMPANY. Power Motion i. CNC + PLC technology for high-performance motion applications. 60 years of CNC experience
THE FACTORY AUTOMATION COMPANY Power Motion i CNC + PLC technology for high-performance motion applications 60 years of CNC experience 100% FANUC experience FANUC is the leading global manufacturer of
More informationLesson 4 Introduction To Programming Words
Lesson 4 Introduction To Programming Words All CNC words include a letter address and a numerical value. The letter address identifies the word type. The numerical value (number) specifies the value of
More informationTOOLPATHS TRAINING GUIDE. Sample. Distribution. not for MILL-LESSON-4-TOOLPATHS DRILL AND CONTOUR
TOOLPATHS TRAINING GUIDE MILL-LESSON-4-TOOLPATHS DRILL AND CONTOUR Mill-Lesson-4 Objectives You will generate a toolpath to machine the part on a CNC vertical milling machine. This lesson covers the following
More informationSPHINX-5X/30. Five Axis Machining Center SPHINX-5X/30. NAMSUN Machinery Corporation 1. With Hidenhain i TNC 530. Five Axis Machining Center
Five Axis Machining Center With Hidenhain i TNC 530 The external color and design may be modified for improvements NAMSUN Machinery Corporation 1 High Speed, High Precision Spindle Because we adopt high
More informationServo-conventional milling machine
Universal Milling Machine Servo-conventional milling machine Control developed and built in Germany Positioning control for traveling pre-selected paths on all axes Constant cutting speed, whereby the
More informationABSTRACT I. INTRODUCTION II. METHODS AND MATERIAL
2017 IJSRSET Volume 3 Issue 2 Print ISSN: 2395-1990 Online ISSN : 2394-4099 Themed Section: Engineering and Technology Generating Point Cloud Data by Using CMM for Modeling and Select Proper Cutting Method
More informationComputer Integrated Manufacturing
Computer Integrated anufacturing Performance Objectives 1 Fundamentals Demonstrate the ability to store, retrieve copy, and output drawing files depending upon system setup. Show-e Content Show-e Goals
More informationTechnical Specification for 5-AXIS CNC MACHINE SPECIFICATION REQUIREMENT of Purchase Requisition No
INDIAN INSTITUTE OF TECHNOLOGY BOMBAY MATERIALS MANAGEMENT DIVISION Direct : (+91-22) 2576 8800 (DR) / 8803 (Local) / 8804 (Import) / 8805 (Enquiry & Bill tracking), 8802(Progress) Email : drmm@iitb.ac.in,
More informationMILLPWR G2. The New Industry Standard. Powered by Factory installed on KENT USA CNC Mills. Since KTM-5VKF w/millpwr G2
MILLPWR G2 The New Industry Standard KTM-5VKF w/millpwr G2 Powered by Factory installed on KENT USA CNC Mills MILLPWR G2 CNC Milling Machine New & Powerful Features Digital Spindle RPM Display Color Spindle
More informationComputer Aided Engineering Applications
Computer Aided Engineering Applications 1A.Geometric Modeling 1.1 Geometric modelling methods 1.2 Data representation 1.3 Modeling functions 1.4 Structure of a CAD system Engi 6928 - Fall 2014 1.Geometric
More informationIntroduction to Solid Modeling Parametric Modeling. Mechanical Engineering Dept.
Introduction to Solid Modeling Parametric Modeling 1 Why draw 3D Models? 3D models are easier to interpret. Simulation under real-life conditions. Less expensive than building a physical model. 3D models
More informationWelcome to. the workshop on the CNC 8055 MC
Welcome to the workshop on the CNC 8055 MC Sales Dpt-Training: 2009-sept-25 FAGOR CNC 8055MC seminar 1 Sales Dpt-Training: 2009-sept-25 FAGOR CNC 8055MC seminar 2 This manual is part of the course for
More informationINSTITUTE OF AERONAUTICAL ENGINEERING
Name Code Class Branch Page 1 INSTITUTE OF AERONAUTICAL ENGINEERING : ROBOTICS (Autonomous) Dundigal, Hyderabad - 500 0 MECHANICAL ENGINEERING TUTORIAL QUESTION BANK : A7055 : IV B. Tech I Semester : MECHANICAL
More informationIntelligent Machining through Automation
Intelligent Machining through Automation CAMWorks is a 3D based CAM system that helps manufacturers improve productivity and profitability by combining world-class technologies and adaptable automation
More informationGeometric Modeling Lecture Series. Prof. G. Wang Department of Mechanical and Industrial Engineering University of Manitoba
Geometric Modeling 25.353 Lecture Series Prof. G. Wang Department of Mechanical and Industrial Engineering University of Manitoba Introduction Geometric modeling is as important to CAD as governing equilibrium
More informationProduct Information. POSITIP PT 8016 Digital Readout for Manually Operated Machine Tools
Product Information POSITIP PT 816 Digital Readout for Manually Operated Machine Tools 11/218 POSITIP PT 816, PT 816 Active The convenient digital readout for milling, drilling, and boring machines, and
More informationCNC PART PROGRAMMING
CNC PART PROGRAMMING (1) Programming fundamentals Machining involves an important aspect of relative movement between cutting tool and workpiece. In machine tools this is accomplished by either moving
More informationSurface Roughness Control Based on Digital Copy Milling Concept to Achieve Autonomous Milling Operation
Available online at www.sciencedirect.com Procedia CIRP 4 (2012 ) 35 40 3rd CIRP Conference on Process Machine Interactions (3rd PMI) Surface Roughness Control Based on Digital Copy Milling Concept to
More informationThe CNC SUPRA serves both types of customers:
Turn-Key Operation for any beginner or experienced machinist who needs a user-friendly, easy to use cnc control to begin cutting parts the same day it arrives! The CNC SUPRA Vertical Knee Mill provides
More informationEdge banders CNC machining centres Vertical panel saws Pressure beam saws Panel Handling. Nesting Technology with High-End Format DYNESTIC 7521
Edge banders CNC machining centres Vertical panel saws Pressure beam saws Panel Handling Nesting Technology with High-End Format DYNESTIC 7521 P R O D U C T I V I T Y A N D P R E C I S I O N D Y N E S
More informationGIGA 8888 CNC 45 TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS INDEX 1. General description and overview page 1 2. Giga 8000 series base machine description page 1 3. Drilling heads page 2 4. Tooling plates page 3
More informationKeywords Stepper motor, spindle motor, leadscrew, ball bearings, flexible coupling, and control system by Arduino micro controller in Easel software.
Design and fabrication of 3-axis CNC Milling machine Sriranga V Deshpande 1, P U Karthik 2, Naveen Kumar D 3, Dr Vijendra Kumar 4, Dr K. S Badrinaryan 5 1.Student, department of mechanical engineering,
More informationUSB Indexer USB Indexer for CNC Controls
USB Indexer USB Indexer for CNC Controls 2009-2011 Calmotion LLC, All rights reserved Calmotion LLC 9909 Topanga Canyon Blvd. #322 Chatsworth, CA 91311 www.calmotion.com -1 2009-2011Calmotion LLC, All
More informationRretrofitting process optimization in CNC machines using PLC and labview
Rretrofitting process optimization in CNC machines using PLC and labview 1 Balaji A, 2 Jahir Hussain H, 3 Faheem Ashkar M R 1 Assistant Professor, 2 UG Scholar, 3 UG Scholar 1 Department of Mechatronics
More informationME COMPUTER AIDED DESIGN COMPUTER AIDED DESIGN 2 MARKS Q&A
ME6501 - COMPUTER AIDED DESIGN COMPUTER AIDED DESIGN 2 MARKS Q&A Unit I 1. What is CAD? Computer aided design (CAD) is the technology concerned with the use of computer systems to assist the creation,
More informationInteractive Virtual Hands-on Manufacturing
Interactive Virtual Hands-on Manufacturing Martin Jun 1 and Patrick Lee 2 1 Associate Professor, Purdue University, West Lafayette, IN 2 Assistant Professor, University of Vermont, Burlington, VM Current
More informationTouch Control Panels. Precision Built Solutions
Touch 2200 Control Panels Precision Built Solutions The Touch 2200 provides world class technology and advanced features not available in other controls proving that east-to-use does not have to mean compromising
More informationComputer-Aided Design / Computer-Aided Manufacturing MEE430,KIM,ME,NIU
Computer-Aided Design / Computer-Aided Manufacturing Computer-Aided Design and Computer-Aided Manufacturing and Applications with Pro/E, 4 th Edition, Meung J. Kim., 2013, LuLu Publishing Co. Reference
More informationFBB Series. Horizontal Boring and Milling Machine FBB-110L
Horizontal Boring and Milling Machine FBB-110L Expansive Solid and Rigid Design Greatly increases Boring and Milling Capability Wide Range of Machining Applications: With the heavy-duty, high-precision
More informationCNC enthusiast September, 2011
Instant Quote PC based CNC controls Machine tools and Custom applications SALES SERVICE TRAINING CNC enthusiast September, 2011 Thank you for inquiring about our Build it Yourself CNC control components
More informationL07 NC-programming and Simulation
Simulation and control of Production Plants L07 NC-programming and Simulation Dipl.-Ing. S. Bauer S.Bauer@wzl.rwth-aachen.de Tel.: 80-28478 Laboratory for Machine Tools and Production Engineering RWTH
More informationChapter 12 Solid Modeling. Disadvantages of wireframe representations
Chapter 12 Solid Modeling Wireframe, surface, solid modeling Solid modeling gives a complete and unambiguous definition of an object, describing not only the shape of the boundaries but also the object
More informationComputer Assisted Technologies in the Development of Prototypes
Computer Assisted Technologies in the Development of Prototypes Simões, José, Leite, Afonso, and Vieitas, José Abstract In the industry computer assisted technologies are being implemented very fast. Most
More informationEXPERIENCE THE POWER. THE NEW BobCAD-CAM V31. We have upgraded the entire customer experience to be more intuitive, modern and efficient.
01 EXPERIENCE THE POWER V31 Whether you re a leading manufacturer or just starting out, BobCAD-CAM has the features, training & support you need to machine better parts FASTER and EASIER, for LESS. THE
More informationSpecifications/price list CMA CNC controlled gantry drilling machines type RAPID-DRILL GRD CNC and GRD 60Z CNCZ
Specifications/price list CMA CNC controlled gantry drilling machines type RAPID-DRILL GRD 25-42 CNC and GRD 60Z CNCZ This newly concepted drilling machine is designed for the fully automatic execution
More informationMill Level 3. Capture Your Machining Knowledge
Mill Level 3 Capture Your Machining Knowledge Mastercam's full associativity gives you the power to capture your knowledge and build on your experience. Once you program a part - any part - you can modify
More informationMILLPWR G2. Powerful conversational CNC retrofit system for knee and bed mills. 2 or 3 Axes Control / 3 Axes Readout.
MILLPWR G2 2 or 3 Axes Control / 3 Axes Readout Powerful conversational CNC retrofit system for knee and bed mills www.acu-rite.com From the moment you power up your MILLPWR G2 system, you ll know it was
More informationNORMA PERALATAN PROGRAM PENGAJIAN POLITEKNIK DIPLOMA IN MECHATRONIC ENGINEERING
NORMA PERALATAN PROGRAM PENGAJIAN POLITEKNIK DIPLOMA IN MECHATRONIC ENGINEERING TERHAD NORMA PERALATAN PROGRAM NAMA JABATAN : BENGKEL WELDING 1 GAS WELDING SET 2 POWER SHEAR CUTTING MACHINE 3 HAND SHEARING
More informationME6703 COMPUTER INTEGRATED MANUFACTURING SYSTEMS Y ear / Sem : IV / VII A Branch: Mechanical Engineering (R2013) Lecturer Wise University Question Papers UNIT I INTRODUCTION LECTURER 1 Part A (2 Marks)
More informationKuang-Hua Chang, Ph.D. MACHINING SIMULATION USING SOLIDWORKS CAM 2018 SDC. Better Textbooks. Lower Prices.
Kuang-Hua Chang, Ph.D. MACHINING SIMULATION USING SOLIDWORKS CAM 2018 SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
More informationTHE POWERFUL AFFORDABLE SOLUTION FOR 2D & 3D CAD AND 3 AXIS CAM MILLING APPLICATIONS PRO 2D & 3D CAD-CAM SOFTWARE
THE POWERFUL AFFORDABLE SOLUTION FOR 2D & 3D CAD AND 3 AXIS CAM MILLING APPLICATIONS v26mill3 AXIS PRO 2D & 3D CAD-CAM SOFTWARE This software is quite frankly WAY underpriced in terms of it s advanced
More informationThe Oscar System Evolution
P.O. Box 30684 Amarillo, Texas 79120 806-381-8898 THE OSCAR SUPER PRO JEWELER S CNC SYSTEM The Oscar System Evolution Oscar was developed by Dan DeArmond, owner of DeArmond Enterprises. Dan has over 30
More informationXIMOTION LLP MAXNC CLOSED LOOP (CL) Software Operation Manual Rev 8/31/12 MAXWIN
XIMOTION LLP MAXNC CLOSED LOOP (CL) Software Rev 8/31/12 MAXWIN Table of Contents Introduction... Safety Guidelines... 1 COMPUTER REQUIREMENTS:... 1 2 CONNECTING TO THE COMPUTER:... 1 2.1 Parallel Port...
More informationDolphin PartMaster Wire EDM
Dolphin PartMaster Wire EDM Copyright 2000-2017 Dolphin CADCAM Systems Ltd. This document is copyrighted and all rights are reserved. This document may not, in whole or in part, be copied or reproduced
More informationIV/IV B. Tech (Regular) DEGREE EXAMINATION November Mechanical Engineering CAD/CAM (14ME 704)
IV/IV B. Tech (Regular) DEGREE EXAMINATION November 2017 Mechanical Engineering CAD/CAM (14ME 704) Scheme of Evaluation Max. Marks: 60 --------------------------------------------------------------------------------------------------------------------------------------
More informationMT 21_CAD/CAM 3(1-2) Than Lin, Ph.D. Assistant Professor Asian Institute of Technology. Lecture: Week 1
MT 21_CAD/CAM 3(1-2) Lecture: Week 1 Than Lin, Ph.D. Assistant Professor Asian Institute of Technology 1 Grading: Quizzes (5%) Mid-Term Exam (30%) Laboratory Exercises (10%) & Project (15%) and Final Exam
More informationModel 90. thermwood. Thermwood CNC Machining Centers. Machine Features Shown
22017 MADE IN USA 5 Axis Model 90 Thermwood, the industry leader in 5 Axis applications with more five-axis systems in operation than any other company. These 5 Axis CNC routers have become the accepted
More informationADVANCED TECHNIQUES APPENDIX A
A P CONTENTS þ Anilam þ Bridgeport þ Fanuc þ Yasnac þ Haas þ Fadal þ Okuma P E N D I X A ADVANCED TECHNIQUES APPENDIX A - 1 APPENDIX A - 2 ADVANCED TECHNIQUES ANILAM CODES The following is a list of Machinist
More informationMILLPWR G2. system, you ll know it was built with convenience in mind. From the moment you power up your MILLPWR G2
MILLPWR G2 2 or 3 Axes Control 3 Axes Readout Powerful conversational CNC retrofit system for knee & bed mills From the moment you power up your MILLPWR G2 system, you ll know it was built with convenience
More information