PSM-ME-RS232/TTY-P Interface converter for RS-232 to TTY transmission systems
|
|
- Teresa Francis
- 6 years ago
- Views:
Transcription
1 Interface converter for RS- to transmission systems. Short Description The rail-mountable and compact interface converters have been designed especially for industrial use in the switch cabinet or switch box. They convert the RS- interface signals bidirectionally to the standard. The devices are simply snapped onto standard EN mounting rails and supplied with V DC or AC. The main areas of application are: Interface adaptation to devices Permanent line for process data evaluation Temporary programming connections The following features of the interface converter are particularly outstanding: operating mode, either active, passive or semiactive Logical signal position can be inverted via plug-in bridge Transmission ranges up to 000 m Transmission rate up to 9. kbit/s High-quality -way isolation (Vcc // RS- // ) Integrated surge voltage protection with transient discharge to the mounting rail Supply voltage ( V DC/AC) to suit the switch cabinet Low nominal current consumption (0 ma) connection with pluggable COMBICON screw terminal blocks RS- connection with 9-pos. SUB-D connector Diagnostics LEDs If you have any technical questions, please contact us at: PSM-HOTLINE:+9/(0) /-9890 FAX:+9/(0) / interface-service@phoenixcontact.com Headquarters: Phoenix Contact GmbH & Co. KG Flachsmarktstraße 8 8 Blomberg Germany Phone +9-(0) --00 Fax +9-(0)
2 RS RS8 D(A) D(B) T(A) T(B) RS RS8 D(A) D(B) T(A) T(B) Interface converter for transmission systems Example application Interface adaptation between the RS- standard and the standard. PSM-ME... permanent line for visualization and process data acquisition (fig. ) Temporary programming and parameterizing connection (fig. ) PSM ME RS/RS8 P Ord.-No.: 8 9 max. 000 m fundamentals RS max. m Nowadays, the current loop interface is also to be found in programmable logic controls (PLC), on visual display units and printers. two shielded and twisted wire pairs are required, one for the transmit and one for the recieve line. Data transmission is carried out using the full duplex procedure with software handshake. Control lines are not provided for. A loop current of 0 ma represents the status logical "". An interrupted circuit represents the logical value "0". A source current is required in each loop, coupled in on either the transmitting or receiving side. The current sourcing side is described as "active" to the "passive" side is always opposite it. We distinguish between three interface configurations (fig. ):.Fully active interfaces with current sources in both the transmitter and receiver branch..passive interfaces without the relevant constant- current sources..semi-active interfaces with current sources only on the transmitter side (TD). The receiver (RD) is designed as passive. To make a transmission path, it is necessary to be familiar with the type of interface. The transmission path is a connection between two semi-active devices or between an active and a passive one. Such transmission can bridge distances of up to 000 m. The conductor pairs should be twisted in pairs for both the transmit and receive loop. In the latest recommendations, the maximum transmission speed was increased from 900 bit/s to 900 bit/s. fully active RS max. m passive semiactive semiactive PSM-ME... PSM ME RS/RS8 P Ord.-No.: 8 9 max. 000 m Fig. Fig. Fig. Standards: DIN 8- DIN 8- Transmission rate: 9. kbit/s Transmission length: 000 m Procedure: current loop Principle: full duplex, point-to-point PHOENIX CONTACT page of 8
3 Interface converter for transmission systems. Order data Type Order No. Pcs. Pkt. Interface converter, for the conversion of RS- to standard, -way isolation, rail-mountable 8.. Accessories Power supply, primary switched-mode, 0 V AC V DC, 0 ma, rail-mountable 0 V AC MCR-PS 0 AC/ DC/0 8 9 MCR-PS 0 AC/ DC/0 8 9 RS- cable, m, to connect the PSM-ME-RS- converter to a 9-pos. device interface RS- cable, m, to connect the PSM-ME-RS- converter to a -pos. device interface SUB-D plug, 9-pos., with screw connection and one cable entry SUB-D9/SUB-D9 (socket/socket) SUB-D9/SUB-D (socket/socket) socket pin PSM-KA-9SUB 9/BB/METER 99 PSM-KA-9SUB /BB/METER 0 SUBCON 9/F-SH 9 9 SUBCON 9/M-SH Technical Data Supply voltage Frequency Rated current consumption Connection LED operational availability RS- interface Type of transmission Coding option Control lines Data indicator Transmission length Connection V AC/DC ± 0 % DC-0 Hz typ. ma pluggable COMBICON screw terminal block LED green acc. to DIN 9 T, CCITT V.8 protocol transparent /DCE switchover via DIP switch RTS/CTS and DTR/DSR permanently bridged internally LED green (RD) RS- receive data (dynamic) LED yellow (TD) RS- transmit data (dynamic) 0... m shielded 9-pos. SUB-D pin strip interface Loop current Load Transmission rates Transmission length Transmission method Connection Coding option Output impedance/transmitter Input impedance/receiver Bit distortion Bit delay. General data data/shield acc. to CL and DIN 8 T x 0 ma ±0% 00 Ω up to 9. kbit/s m twisted pair, shielded -wire, full duplex pluggable COMBICON screw terminal block /shield connector passive, semi-active or active operation via insertion bridges max. Ω Ω % µs Protection circuit Transient discharge Electrical -way isolation Test voltage Resistance to vibration Ambient temperature range Protection type Housing: Connection data (conductor cross section) - COMBICON plug connectors Weight Approval Material Dimensions (W / H / D) Y-capacitors, suppressor diodes, gas-filled surge arresters via metal foot on EN mounting rail power supply // RS- // kvrms, 0 Hz, min. g in acc. with IEC C to + C IP 0 PA-V0 (99 /./ 8.) mm mm (AWG -) approx. g u ) NRZ: Non Return To Zero PHOENIX CONTACT page of 8
4 8, Interface converter for transmission systems c Complies with EMC guideline 89//EEC EMC (electromagnetic compatibility) Immunity to interference in acc. with EN 008- Electrostatic discharge (ESD) Electromagnetic HF field: Amplitude modulation: Pulse modulation: Fast transients (Burst) Signal: Supply: Surge voltage capacities (Surge) Signal: Supply: Conducted disturbance Noise emission in acc. with EN 008- EN EN EN EN EN EN 0 Criterion B 8 kv discharge in air kv contact discharge Criterion A 0 V/m 0 V/m Criterion B kv/ khz kv/ khz Criterion B kv/ Ω 0. kv/ Ω Criterion A 0 V Class A EN 000 corresponds to IEC 000 EN 0 corresponds to CISPR Criterion A: Normal operating behavior within the defined limits. Criterion B: Temporary impairment of operational behavior that the device corrects itself. Class A: Area of application: industry, without special installation measures. 99, Fig. PHOENIX CONTACT page of 8
5 RS - Device-Typ RS DCE Inv. norm. VCC Interface converter for transmission systems Function elements (fig. ) Supply voltage V AC/DC LED supply voltage (VCC) LED-RS receive data (RD) LED-RS transmit data (TD) RS- interface connection (SUB-D 9-pos.) interface connection Shield connector 8 Snap-on foot for mounting rails in acc. with DIN EN 0 0 T+ S+ S+ T+ S+ S+ T R RS Ord.-Nr.: 8 Ord.-No.: 8 T R APPROBATIONEN / APPROVALS APPROBATIONEN / APPROVALS 8 Fig.. Operational Diagram SUB - D 9 pole Steckbare Schraubklemme Screw terminal block Bloc de jonction a`vis Borne de tornillo V V OV OV +V (Port B) +V (Port A) gn DCE 0mA S+ T + T - TxD RxD gn RTS CTS DSR 8 ye 0mA R - R + S+ DTR Shield Fig. PHOENIX CONTACT page of 8
6 Device-Typ RS DCE Inv. norm. Interface converter for transmission systems. Notes on connection V.. Connections (fig. 8) Plug connector power supply Connect V AC/DC ± 0 % via the COMBICON plug connector (PIN and ). Operational availability is signaled via the VCC LED. 0 V RS- interface 9-pos. SUB-D pin strip interface pluggable COMBICON screw terminal block PSM ME RS/ P Ord.-No.: RS T+ S+ S+ T R Fig. 8.. Mounting in the switch cabinet (fig. 9) Mounting (on mm mounting rails in acc. with DIN EN 0 0): Hinge the device into the upper edge of the mounting rail and snap it in with a downward motion. Note: The mounting rail must be connected to ground potential. This is the only way to guarantee that the integrated surge voltage protection functions and that the shield of the bus conductor makes contact effectively. Dismantling: Pull back the metal disassembling lever with the aid of a screwdriver and remove the device. T R T+ S+ S+ T+ S+ S+ T R RS Ord.-Nr.: 8 Ord.-No.: 8 APPROBATIONEN / APPROVALS APPROBATIONEN / APPROVALS Fig. 9 PHOENIX CONTACT page of 8
7 Interface converter for transmission systems. The RS- interface Designation SUB-D 9-pos. (pin) PSM-ME-RS... peripherals side Transmit data TXD PIN Receive data RXD PIN Clear to send CTS PIN 8 Request to send RTS PIN Functional ground PIN DEE data terminal ready DTR PIN Data set ready DSR PIN Ground Shield.. Interface coupling SUB-D 9-pos. (pin) TxD RxD CTS RTS DTR DSR 8 max. m SUB D TxD RxD CTS RTS DTR DSR Make a -to- connection between the PSM module and the peripheral device as shown in Fig. 0. Note: For a minimum configuration, you need to connect TXD, RXD and (software handshake)! Connect the 9-pin SUB-D plug to the module. Fig. 0.. Data indicator Two diagnostic LEDs indicate the RS- interface modes Yellow: Transmit data (TD), dynamic Green: Receive data (RD), dynamic T+ S+ S+ T+ S+ S+ T R PSM-ME-RS/T RS Ord.-Nr.: 8.. Configuration For configuration, release the top of the housing on both sides. Pull the p.c.b. out of the housing as far as possible (fig. ). T R Static charges can damage electronic devices. Discharge the electrical charge from your body before opening and configuring the device. To do so, touch a grounded surface, e.g. the metal housing of the switch cabinet. APPROBATIO Fig. PPROBATIO.. /DCE switchover (fig. ) The /DCE switches can be used to cross the cables TXD and RXD internally so that an adaptation can be performed easily. For the connection to: Data terminal equipment () switch to position (up). (Standard setting for most applications) /DCE Data communication equipment (DCE) switch to position DCE (down). If the connected interface type is unknown, you can determine the right configuration by trial and error (/DCE switch). Fig. PHOENIX CONTACT page of 8
8 Interface converter for transmission systems. The interface.. Pin configurations Designation COMBI- CON (fr. right) PSM-ME- active S+ T+ T PSM-ME- passive R Current source neg. polarity PIN pos. polarity S+ PIN Current source neg. polarity PIN pos. polarity S+ PIN Transmit data neg. polarity T- PIN pos. polarity T+ PIN Receive data neg. polarity R- PIN pos. polarity PIN Ground connection shield 8 R S+ S+ T+ T R PSM-ME- semi-active T T+ PSM-ME- semi-active R T T+ S+ Fig. a.. Operating modes The desired operating mode active, passive (fig. a) or semi-active (fig. b) is set using external insertion bridges is determined scheme of wiring (bridges are included in the scope of supply). Note: Only one fully active interface may be connected to a passive interface, or two semi-active interfaces to one another! We recommend shielded twisted pair cables ( x cores twisted) as connecting cable. Jumper Fig. b.. Inverting the signal position The logical signal position is configured at delivery for normal operation (log. = current flow 0 ma). The logical signal position can be inverted by switching a jumper below the /DCE change-over switch (fig. ).. Shielding the data cables Use shielded twisted pair cables. Connect the cable shield to both sides of the transmission path! The data cables are shielded using a shield connector that is fixed in the terminal block (fig. ). The terminal block is connected capacitively to the mounting rail contact on the underside of the device. The shield connector is included in the scope of supply. insertion bridges example fully active T R T+ S+ S+ T+ S+ S+ T R RS RS Fig. ROB B Fig. PHOENIX CONTACT TNR: PHOENIX CONTACT page 8 of 8
MINI MCR-SL-UI-2I(-SP)(-NC)
Data Sheet 03/2005 Product Description Features Configurable signal duplicator MINI MCR-SL-UI-2I(-SP)(-NC) is used to electrically isolate, condition, amplify, and filter analog standard signals. On the
More informationMINI MCR-SL-UI-REL(-SP)
Configurable Threshold Value Switch Data Sheet 11/2004 Method of Operation The configurable 3-way threshold value switch MINI MCR-SL-UI-REL(-SP) is used to control and monitor analog standard signals.
More informationonlinecomponents.com
Repeater for RS-485 2-Wire Systems INTERFACE Data Sheet 102964_C01_en 1 Description The PSI-REP-RS485W2 DIN-rail mountable, modular RS-485 repeater is designed to meet the high requirements associated
More informationPHOENIX CONTACT - 07/2006
Buffer module with maintenance-free capacitor-based power storage device INTERFACE Data sheet 102035_03_en PHOENIX CONTACT - 07/2006 Description Short-term mains interruptions are bridged by QUINT BUFFER,
More informationMINI-PS AC/10-15DC/8
Primary-Switched Power Supply, Narrow Design Data Sheet 08/2004 MINI POWER provides: An extra narrow design, with widths of 22.5 mm, 45 mm, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a
More informationMINI MCR-SL-PT100-UI(-SP)(-NC)
Configurable Temperature Transducer for PT100 Data Sheet 04/2005 Functions MINI MCR-SL-PT100-UI(-SP)(-NC) is a configurable 3-way isolated temperature measuring transducer. It is suitable for the connection
More informationTRIO-DIODE/12-24DC/2X10/1X20
Redundancy module INTERFACE Data sheet 104278_en_00 1 Description PHOENIX CONTACT 20100423 Features TRIO DIODE is the DINrail mountable redundancy module from the TRIO POWER product range. Using the redundancy
More informationIB ST 24 AO 4/EF. INTERBUS-ST analog output module, 4 outputs, 0-10 V, ±10 V, 0-20 ma, 4-20 ma. Data sheet. 1 Description
INTERBUS-ST analog output module, 4 outputs, 0-10 V, ±10 V, 0-20 ma, 4-20 ma Data sheet 105597_en_01 PHOENIX CONTACT 2014-10-24 1 Description The module is designed for use within an ST station. It is
More informationILBIB24DO16-DSUB. Inline Block IO Module for INTERBUS With 16 Digital Outputs; Bus Connection via D-SUB Connectors
Inline Block IO Module for INTERBUS With 16 Digital Outputs; Bus Connection via D-SUB Connectors AUTOMATIONWORX Data Sheet 7119_en_02 PHOENIX CONTACT - 03/2007 Description The ILB IB 24 DO16-DSUB module
More informationPHOENIX CONTACT - 01/2007
Uninterruptible power supply INTERFACE Data Sheet 103123_00_en PHOENIX CONTACT - 01/2007 Description Especially compact and easy-to-use, the new MINI-DC-UPS/ 24 DC/2 is a combination of the power supply
More informationPower Supply, Primary Switch Mode, Narrow Design MINI-PS AC/24DC/1
Power Supply, Primary Switch Mode, arrow Design -PS-100-240AC/24/1 POWER provides: Extra narrow widths of 22.5, 45, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a wide range input A high
More informationonlinecomponents.com
Converter for RS-422/485 4-Wire/INTERBUS PSI-MOS-RS422/... This data sheet applies to the following items: PSI-MOS-RS422/ 660 E Order No. 27 08 34 2 PSI-MOS-RS422/ 660 T Order No. 27 08 38 4 PSI-MOS-RS422/
More informationQUINT-BUFFER/24DC/24DC/40
Buffer module Data sheet 105496_en_01 PHOENIX CONTACT 2013-11-01 1 Description The QUINT BUFFER buffer module combines the electronic switchover unit and power storage in the same housing. The buffer module
More informationPSM-ME-RS485/RS485-P. Repeater for RS wire bus systems. Data sheet. 1 Description
Repeater for RS-485 2-wire bus systems Data sheet 100273_en_06 PHOENIX CONTACT 2016-09-09 1 Description The PSM-ME-RS485/RS485-P RS-485 repeater was developed for the high requirements of fieldbus systems.
More informationPSI-MODEM-SHDSL/SERIAL
PSI-MODEM-/SERIAL -SERIAL permanent line modem Data sheet 104460_en_02 PHOENIX CONTACT 2011-12-06 1 Description The industrial SERIAL permanent line modem enables broadband networking of serial devices
More informationPSI-MODEM-SHDSL/PB. Broadband PROFIBUS extender, SHDSL PROFIBUS leased line modem. Data sheet _en_03. 1 Description. 1.
PSI-MODEM-/PB Broadband PROFIBUS extender, PROFIBUS leased line modem Data sheet 104396_en_03 1 Description PHOENIX CONTACT 2013-08-21 1.1 Features The PROFIBUS extender can be used to easily network PROFIBUS
More informationManual Industry Interfaces
Manual Industry Interfaces W&T Release. Type 0, 0 0, 00 0, 0 0, 0 Industry Interfaces 0/0 by Wiesemann & Theis GmbH Subject to errors and changes: Since we can make mistakes, none of our statements should
More informationOperating Manual UMB ISO Converter ISOCON Order Number: 8160.UISO
Order Number: 8160.UISO Status: V3; 17.09.2010c G. Lufft Mess- und Regeltechnik GmbH, Fellbach, Germany 1 TABLE OF CONTENTS PLEASE READ BEFORE USE... 3 DESCRIPTION... 5 UMB ISO CONVERTER ISOCON... 6 CONFIGURATION...
More informationILBPB24DO32. Inline Block IO Module for PROFIBUS With 32 Digital Outputs. AUTOMATIONWORX Data Sheet 6889_en_04. Description
Inline Block IO Module for PROFIBUS With 32 Digital Outputs AUTOMATIONWORX Data Sheet 6889_en_04 Description PHOENIX CONTACT - 03/2007 & & ' ) The ILB PB 24 DO32 module is designed for use within a PROFIBUS
More informationExtract from the online catalog
Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The
More informationPHOENIX CONTACT - 01/2010. Features. DANGER OF EXPLOSION! Only remove equipment when it is disconnected and not in the potentially explosive area.
Uninterruptible power supply with integrated power supply unit INTERFACE Data sheet 104211_en_00 1 Description PHOENIX CONTACT - 01/2010 Features The MINI-DC-UPS provide an uninterruptible DC voltage both
More informationPower Supply, Primary Switch Mode for Universal Use QUINT-PS AC/48DC/5
Power Supply, Primary Switch Mode for Universal Use -PS-100-240AC/48/5 POWER provides: Preventive function monitoring through professional signaling Global use due to a wide range input A high level of
More informationThis data sheet is only valid in association with the IL SYS INST UM E user manual.
Inline analog input terminal, 4 inputs for connecting voltage signals Data sheet 8081_en_01_C01 PHOENIX CONTACT 2015-04-14 1 Description The terminal is designed for use within an Inline station. It is
More informationMINI MCR-SL-UI-2I. Configurable signal duplicator. Data sheet. 1 Description
Configurable signal duplicator Data sheet 102382_en_03 PHOENIX CONTACT 2012-05-02 1 Description The MINI MCR-SL-UI-2I(-SP)(-NC) configurable signal duplicator is used to electrically isolate, condition,
More informationFL MC 2000E (SM40) LC
IEC 61850 fiber optic converter with LC fiber optic connection (1310 nm) to convert 100Base-Tx to single- or multi-mode fiber glass Data sheet 3205_en_C 1 Description PHOENIX CONTACT 2014-04-04 2 Features
More informationMINI MCR-SL-RPS-I-I. Repeater power supply, active. Data sheet. 1 Description
Repeater power supply, active Data sheet 09_en_0 PHOENIX CONTACT 0--0 Description The. mm wide... repeater power supply supplies transmitters in the field and electrically isolates the input signal from
More informationPHOENIX CONTACT - 08/2009. Features. DANGER OF EXPLOSION! Only remove equipment when it is disconnected and not in the potentially explosive area.
Primary-switched power supply for building automation INTERFACE Data sheet 103505_en_02 1 Description PHOENIX CONTACT - 08/2009 Features STEP POWER power supply units for building automation The new STEP
More informationonlinecomponents.com
Uninterruptible Power Supply Unitfor Universal Use. Short Description Uninterruptible Power Supply Units for Buffering Long-Term terruptions Saves space thanks to the compact, uniform design Integrated
More informationUninterruptible Power Supply Unit for Universal Use QUINT-DC-UPS/24DC/40
Uninterruptible Power Supply Unit for Universal Use QUINT-DC-UPS/4DC/40. Short Description Uninterruptible Power Supply Units for Buffering Long-Term terruptions Saves space thanks to the compact, uniform
More informationRAD-DO8-IFS. I/O extension module, eight digital transistor outputs. Data sheet. 1 Description
I/O extension module, eight digital transistor outputs Data sheet 105364_en_00 PHOENIX CONTACT 2013-03-26 1 Description The I/O extension module can be used in conjunction with Radioline wireless modules
More informationMINI MCR-SL-UI-2I-NC. Extract from the online catalog. Order No.:
Extract from the online catalog MINI MCR-SL-UI-2I-NC Order No.: 2864176 4-way signal duplicator for electrical isolation and duplication of analog signals with screw connection, standard configuration
More informationMINI MCR-SL-PT100-UI-200
Configurable temperature transducer for PT00 INTERFACE Data sheet 078_en_0 PHOENIX CONTACT 00-0-5 Description The MINI MCR-SL-PT00-UI-00... is a configurable -way isolated temperature transducer. It is
More informationSTEP-PS/1AC/24DC/1.75
Primary-switched power supply, 1 AC, output current 1.75 A INTERFACE Data Sheet 103506_en_00 1 Description PHOENIX CONTACT - 05/2008 Features STEP POWER power supply units for building automation The new
More informationPSI-MOS-PROFIB/FO 850 T
Extract from the online catalog PSI-MOS-PROFIB/FO 850 T Order No.: 2708261 FO converter with integrated optical diagnosis, alarm contact, for PROFIBUS up to 12 MBit/s, T-coupler with two FO interfaces
More informationDI561 Digital Input Module
Ordering Data DATA SHEET DI561 Digital Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R2101 1TNE 968 901 R3101 1TNE 968 901 R3103 1TNE 968 901 R3105 DI561, digital
More informationPHOENIX CONTACT - 04/2008
Serial Bluetooth adapter for a wireless connection of a serial interface to a Bluetooth access point AUTOMATION Data Sheet 7660_en_01 PHOENIX CONTACT - 04/2008 1 Description The FL BLUETOOTH Serial Port
More informationPHOENIX CONTACT - 10/2009
Factory Line Switches With Standard Functions AUTOMATIONWORX Data Sheet PHOENIX CONTACT - 10/2009 Description The range of Factory Line switches with standard functions in numerous versions can be used
More informationExtract from the online catalog
Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The
More informationFL COMSERVER /422/485
Serial RS-232/RS-422/RS-485 device server for industrial 10/100 BASE-T(X) networks Data sheet 103827_en_08 PHOENIX CONTACT 2014-12-11 1 Description The FL COMSERVER... 232/422/485 enables the integration
More informationAI561 Analog Input Module
Ordering Data DATA SHEET AI561 Analog Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R1101 AI561, analog input module, 4 AI, U/I 1TNE 968 901 R3101 1TNE 968
More informationDI572 Digital Input Module
Ordering Data DATA SHEET DI572 Digital Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 230 500 R0000 1TNE 968 901 R3101 1TNE 968 901 R3102 1TNE 968 901 R3103 1TNE 968
More informationAO561 Analog Output Module
Ordering Data DATA SHEET AO561 Analog Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R1201 AO561, analog output module, 2 AO, U/I 1TNE 968 901 R3102 Terminal
More informationEasy Analog RNB130. Technical Information. Primary switched-mode power supply
Technical Information Easy Analog RNB130 Primary switched-mode power supply Your benefits Small housing, 35 mm (1.38") width High availability Wide range input - can be used world-wide Power reserve (Power
More informationVL BPC MINI. A configurable industrial computer platform Intel Atom Z510PT CMAT IPC Module Option [I28] AUTOMATION Data Sheet 2930_en_A.
A configurable industrial computer platform Intel Atom Z0PT CMAT IPC Module Option [I8] AUTOMATION Data Sheet 90_en_A Description PHOENIX CONTACT 0-0-0 Features The VL BPC MINI is an embedded box PC and
More informationExtract from the online catalog
Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The
More informationVL BPC MINI. A configurable industrial computer platform. Data sheet 2930_en_F. 1 Description. 2 Features
A configurable industrial computer platform Data sheet 90_en_F Description PHOENIX CONTACT 0-08- Features The VL BPC MINI is an embedded box PC and is part of the Valueline family of industrial computers.
More informationPSI-GPRS/GSM-MODEM/RS232- QB
PSI-GPRS/GSM-MODEM/RS232- QB Serial mobile communication modem for GSM and GPRS Data sheet 103144_en_03 PHOENIX CONTACT 2015-05-12 1 Description The DIN-rail-mountable PSI-GPRS/GSM-MODEM/RS232- QB mobile
More informationPHOENIX CONTACT - 06/2007. DANGER OF EXPLOSION! Remove an item only when it is not connected to power or if it is located in the non-explosive area.
Primary switched power supply, 3-phase, output current: 40 A INTERFACE Data Sheet 102782_01_en PHOENIX CONTACT - 06/2007 Description TRIO POWER is the rail mountable 24 V power supply unit with basic functions.
More informationMINI MCR-SL-PT100-UI. Active resistance thermometer measuring transducer. Data sheet. 1 Description
Active resistance thermometer measuring transducer Data sheet 099_en_06 PHOENIX CONTACT 0-0- Description The 6. mm wide MINI MCR-SL-PT00-UI-... is a configurable, -way isolated temperature measuring transducer.
More informationManual Fiber Optic Interfaces
Manual Fiber Optic Interfaces Type 81210, 81211 61210, 61211 65210, 65211 41210 Release 1.4 Subject to error and alteration 31 06/2007 by Wiesemann & Theis GmbH Subject to error and alteration: Since it
More informationQUINT-PS-3x AC/24DC/10
3-Phase Primary-Switched Power Supply Unit INTERFACE Data Sheet PHOENIX CONTACT - 12/2005 Description QUINT POWER devices are 60...960 W power supply units for universal use. This is ensured by the wide-range
More informationDC562, digital input/output module,
Ordering Data DATA SHEET DC562 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 231 900 R0000 1TNE 968 901 R3101 1TNE 968 901 R3102 1TNE 968 901 R3103 1TNE
More informationRedundancy Module QUINT-DIODE/40
Redundancy Module QUT DIODE provides: 00% decoupling of power supplies connected in parallel Can be installed in potentially explosive areas Load currents up to 60 A supported Easy assembly by snapping
More informationMINI MCR-SL-CVS NC
Constant voltage source Data sheet 105264_en_01 PHOENIX CONTACT 2013-04-03 1 Description Configurable constant voltage source for generating highprecision constant voltages. The voltage supply is also
More informationTF501, TF521 Terminal Bases
Ordering Data DATA SHEET TF501, TF521 Terminal Bases 1 Ordering Data Part No. Scope of delivery Product life cycle status 1SAP 117 000 R0271 1SAP 317 000 R0271 1SAP 117 200 R0271 1SAP 317 200 R0271 TF501-CMS,
More informationPHOENIX CONTACT - 05/2007
Ex Universal Module Carrier (Motherboard) for Accommodating 3-Wire Measuring Transducers, Intrinsically Safe, for a Maximum of 8 PI Ex Modules INTERFACE Data Sheet 103030_00_en PHOENIX CONTACT - 05/2007
More informationPSR-SCP- 24DC/URM4/4X1/2X2/B PSR-SPP- 24DC/URM4/4X1/2X2/B
Safety Relay as a Contact Extension Block INTERFACE Data Sheet PHOENIX CONTACT - 05/2006 Description The PSR-...- 24DC/URM4/4X1/2X2/B safety relay can be used as a contact extension block in safety circuits
More informationPart No. Description Product Life Cycle Phase *) unit, 24 VDC, spring terminals. unit, 24 VDC, spring terminals, XC version
Ordering Data DATA SHEET TU520 Terminal Unit 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 214 400 R0001 1SAP 414 400 R0001 TU520-ETH, PROFINET I/O terminal unit, 24 VDC, spring
More informationDX561 Digital Input/Output Module
Ordering Data DATA SHEET DX561 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R2301 1TNE 968 901 R3101 DX561, digital input/output module, 8 DI
More informationIBS PCI SC/I-T. Controller Board for PC Systems With PCI Bus. Data Sheet 6039B
Controller Board for PC Systems With PCI Bus Data Sheet 6039B 01/2002 Product Description INTERBUS Generation 4 controller board with a host interface for the PCI bus. Features INTERBUS protocol (IEC 6
More informationPI-EX-ME-2NAM/COC-24VDC
Ex-i NAMUR Isolation Amplifier, With Intrinsically Safe Input and Relay Output, PDT, Two-Channel, 4 V DC Supply INTERFACE Data Sheet 0033_0_en PHOENIX CONTACT - /007 Description The PI-EX-ME-NAM/COC-4VDC
More informationPCD3.C90. Date Modification Asked by: Version E/A Bus Connector PCD2.K106 change to PCD3.K106 Müller.R 1.1
Manual PCD3.C90 Revision History Date Modification Asked by: Version 14.09.09 E/A Bus Connector PCD2.K106 change to PCD3.K106 Müller.R 1.1 22.09.09 Added E/A Bus Connector PCD3.K116 Müller.R 1.2 06.01.10
More informationChannel Switch CS. General Operating, Maintenance and Installation Manual
Channel Switch CS General Operating, Maintenance and Installation Manual D-91056 Erlangen Phone: +49 9131 7677 47 Fax: +49 9131 7677 74 Internet: http://www.ipcomm.de Email: info@ipcomm.de Edition September
More informationDC561, digital input/output module,
Ordering Data DATA SHEET DC561 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R2001 DC561, digital input/output module, 16 configurable inputs/outputs,
More informationPHOENIX CONTACT - 05/2008. Features. DANGER OF EXPLOSION! Only remove equipment when it is disconnected and not in the potentially explosive area.
Primary switched power supply, 1-phase, output current: 5 A ITERFACE Data Sheet 103349_en_00 1 Description PHOEIX COTACT - 05/2008 Features TRIO POWER is the DI-rail-mountable power supply unit with basic
More informationPHOENIX CONTACT - 12/2007
Ex-i NAMUR Isolation Amplifier, With Intrinsically Safe Input and Active Transistor Output, Two-Channel INTERFACE Data Sheet 0943_00_en PHOENIX CONTACT - /007 Description The PI-EX-ME-NAM/TO-A is a two-channel
More informationTU531, TU532 Terminal Unit
Ordering Data DATA SHEET TU531, TU532 Terminal Unit 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 217 200 R0001 1SAP 217 000 R0001 1SAP 417 000 R0001 TU531, terminal unit, 230 VAC,
More informationPI-EX-ME-2NAM/COC-120VAC
PI-EX-ME-NAM/COC-0VAC Ex-i NAMUR Isolation Amplifier, With Intrinsically Safe Input and Relay Output, PDT, Two-Channel, 0 V AC Supply INTERFACE Data Sheet 0944_00_en PHOENIX CONTACT - 0/008 Description
More information1-Phase Power Supply, Primary Switch Mode for Use in Potentially Explosive Areas QUINT-PS AC/24DC/5/EX
1-Phase Power Supply, Primary Switch Mode for Use in Potentially Explosive Areas -PS-100-240AC/24/5/EX POWER provides: Preventive function monitoring through professional signaling Global use due to a
More informationRAD-DI8-IFS. I/O extension module with 8 digital inputs or 2 pulse inputs. INTERFACE Data sheet. 1 Description
I/O extension module with 8 digital inputs or 2 pulse inputs INTERFACE Data sheet 0483_en_00 PHOENIX CONTACT 203-04-05 Description The I/O extension module can be used in conjunction with Radioline wireless
More informationElectronic timer CT-ERS.21
2CDC 251 057 F0t07 Features Rated control supply voltage 24 240 V AC/DC Single function ON delay timer One device includes 10 time ranges (0.05 s 300 h) 2 c/o contacts 2 LEDs for status indication Width
More informationPSR-SCP- 24DC/SSM/2X1 PSR-SPP- 24DC/SSM/2X1
PSR-SCP- DC/SSM/2X1 PSR-SPP- DC/SSM/2X1 Safety Relay With Downtime Monitoring INTERFACE Data Sheet PHOENIX CONTACT - 05/2006 Description The PSR-...- DC/SSM/2X1 safety relay can be used in safety circuits
More informationPHOENIX CONTACT - 11/2007. This data sheet is only valid in association with the IB IL SYS PRO UM E user manual.
INTERBUS Inline Bus Coupler; Remote Bus Connections Via D-SUB Connectors REMOTE IN BA UL RD RC DSUB LD AUTOMATIONWORX Data Sheet 6362_en_03 PHOENIX CONTACT - 11/2007 REMOTE OUT Description The bus coupler
More informationAO523 Analog Input Module
Ordering Data DATA SHEET AO523 Analog Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 250 200 R0001 1SAP 450 200 R0001 AO523, analog output module, 16 AO, U/I, 12 bits
More informationElectronic timer CT-ARS.11
2CDC 251 088 F0t07 Features Rated control supply voltage 24 240 V AC/DC Single function OFF delay timer without auxiliary voltage One device includes 7 time ranges (0.05 s 10 min) 1 c/o (SPDT) contact
More informationAccessories / 7XV5662
Accessories / XV Communication Converter XV-0AA00/GG for X. / RS / G.0. *) Fig. / Communication converter for X./ RS and G.0. The communication converter CC-XG for coupling to a communication network is
More informationElectronic timer CT-ERS.12 ON-delayed with 1 c/o contact Data sheet
2CDC 251 056 F0t07 Features Rated control supply voltage 24-48 V DC, 24-240 V AC Single-function ON-delay timer One device includes 10 time ranges (0.05 s - 300 h) 1 c/o contact 2 LEDs for status indication
More informationAI531 Analog Input Module
Ordering Data DATA SHEET AI531 Analog Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 250 600 R0001 AI531, analog input module, 8 AI, U/I/Pt100, TC, 15 bits + sign, 4-wires
More informationCM579-PNIO PROFINET Communication Module
Ordering Data DATA SHEET CM579-PNIO PROFINET Communication Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 170 901 R0101 1SAP 370 901 R0101 CM579-PNIO, PROFINET communication
More informationElectronic timer CT-ERD.12
2CDC 251 092 F0t06 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied
More informationW&T. Universal Fiber Optic Interface Converter W&T. Manual. Universal FO Interface Converter. Model Release 1.0. Subject to error and alteration
Manual Universal FO Interface Converter Model 81215 Release 1.0 Subject to error and alteration 13 10/2012 by Wiesemann & Theis GmbH Subject to error and alteration: Since it is possible that we make mistakes,
More informationVL BPC 100. Valueline configurable box PC. Data sheet 3063_en_E. 1 Description. 2 Features
Valueline configurable box PC Data sheet 0_en_E Description PHOENIX CONTACT 0-07- Features The VL BPC 000 is a configurable box PC that can be mounted either directly on a wall or on a DIN rail. The VL
More informationPower supply CP-C 24/5.0
2CDC 271 064 F0004 Features Supply voltage ranges: 85-264 V AC, 100-350 V DC Output voltage adjustable from 22-28 V DC, default setting 24 V DC 0,5 % 5 A output current Open-circuit, overload and continous
More informationElectronic timer CT-AHD.22
2CDC 251 093 F0t06 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied
More informationCM589 PROFINET Communication Module
Ordering Data DATA SHEET CM589 PROFINET Communication Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 172 900 R0011 1SAP 372 900 R0011 1SAP 172 900 R0111 1SAP 372 900 R0111
More informationFL MC 10/100BASE-T/FO-660
Extract from the online catalog FL MC 10/100BASE-T/FO-660 Order No.: 2708193 FO converter, for converting 10/100Base-T to polymer and HCS fiber, (660 nm), SCRJ FO connection (PROFINET standard), rail-mountable,
More informationFL SWITCH 8TX. Extract from the online catalog. Discontinued item. Order No.:
Extract from the online catalog FL SWITCH 8TX Discontinued item Order No.: 2832218 Ethernet Switch, 8 front Ethernet ports in RJ45 format, automatic detection of data transmission speed of 10 or 100 Mbps,
More informationRAD-DOR4-IFS. I/O extension module, 4 digital relay outputs. INTERFACE Data sheet. 1 Description
I/O extension module, 4 digital relay outputs INTERFACE Data sheet 104834_en_01 PHOENIX CONTACT 2013-01-21 1 Description The RAD-DOR4-IFS I/O extension module can be used in conjunction with Radioline
More informationETD-BL-1T-230(-PT) Multifunctional time relay with various functions and adjustable times. Data sheet. 1 Description
(-PT) Multifunctional time relay with various functions and adjustable times Data sheet 106395_en_02 PHOENIX CONTACT 20-06-08 1 Description Requirements pertaining to safety and system availability increase
More informationFL MC 2000T. Fiber optic converter for 10/100Base-Tx to single- or multi-mode fiberglass with SC-duplex and ST connections. Data sheet 3379_en_B
Fiber optic converter for 10/100Base-Tx to single- or multi-mode fiberglass with SC-duplex and ST connections Data sheet 3379_en_B 1 Description PHOENIX CONTACT 2015-07-14 2 Features Media converters provide
More informationPHOENIX CONTACT - 05/2008. Features. DANGER OF EXPLOSION! Only remove equipment when it is disconnected and not in the potentially explosive area.
Primary switched power supply, 1-phase, output current: 5 A ITERFACE Data Sheet 102777_en_03 1 Description PHOEIX COTACT - 05/2008 Features TRIO POWER is the DI-rail-mountable power supply unit with basic
More informationAX522 Analog Input/Output Module
Ordering Data DATA SHEET AX522 Analog Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 250 000 R0001 1SAP 450 000 R0001 AX522, analog input/output module, 8 AI
More informationOvervoltage Protection Devices
Siemens AG 2010 Overvoltage Protection Devices /2 Introduction /3 Lightning Arresters, Type 1 /5 Combination Surge Arresters, Type 1 and Type 2 /7 Surge Arresters, Type 2 /11 Surge Arresters, Type 3 /12
More informationPSR-MS60. Safety relay for emergency stop, safety door and light grid monitoring. Data sheet. 1 Description
SILCL IEC 62061 Safety relay for emergency stop, safety door and light grid monitoring Data sheet 106171_en_01 PHOENIX CONTACT 2015-05-19 1 Description Intended Use The PSR-MS60 safety relay can be used
More informationCM589 PROFINET Communication Module
Ordering Data DATA SHEET CM589 PROFINET Communication Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 172 900 R0011 1SAP 372 900 R0011 1SAP 172 900 R0111 1SAP 372 900 R0111
More informationOHIO SEMITRONICS, INC. AC MULTIFUNCTION PROGRAMMABLE TRANSDUCERS & -1000L
AC PROGRAMMABLE TRANSDUCERS MODBUS OR LONWORKS DESCRIPTION The DMT-1000 is a programmable transducer with an RS-485 bus interface (MODBUS ). It supervises several variables of a poly-phase electrical power
More informationOutput Voltage* (nom.)(adjustable)
Industrial Power Supplies TBLC Series, 6 90 W Low profile case, module depth only 55 mm Suitable for mounting in domestic installation panels Very high efficiency and low standby power -> compliance to
More informationCM597 Ethernet Communication Module
Ordering Data DATA SHEET CM597 Ethernet Communication Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 173 700 R0001 1SAP 373 700 R0001 CM597-ETH, communication module Ethernet
More informationPSR-SCP- 24DC/SDC4/2X1/B PSR-SPP- 24DC/SDC4/2X1/B
PSR-SCP- 24DC/SDC4/2X1/B PSR-SPP- 24DC/SDC4/2X1/B Safety Relay for Emergency Stop and Safety Door Circuits INTERFACE Data Sheet 102858_02_en PHOENIX CONTACT - 12/2006 Description The PSR-...- 24DC/SDC4/2X1/B
More informationCM592 PROFIBUS Communication Module
Ordering Data DATA SHEET CM592 PROFIBUS Communication Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 173 200 R0001 1SAP 373 200 R0001 CM592-DP, communication module PROFIBUS
More information