Manual. Navico SW Upgrade Tool. English.
|
|
- Angela Greer
- 6 years ago
- Views:
Transcription
1 Manual Navico SW Upgrade Tool English Brands by Navico - Leader in Marine Electronics
2 Manual NAVICO Software Upgrade Tool English Document no: Revision: B Date: October 2008 The original language for this document is English. In the event of any discrepancy between translated versions and the English version of this document, the English document will be the official version. To the best of our knowledge, the content in this publication was correct at the time of printing. As we are continuously improving our products we retain the right to make changes to the product and the documentation at any time. Updated manuals are available from our website and are free to download. Copyright 2008 by Navico Holding AS.
3 About the Navico Software Upgrade Tool This program is mainly used for upgrading the software of Simrad products/devices. It can also be used for other purposes like: Get an overview of devices found on a SimNet network Copy device information to clipboard Export device information to HTML Perform factory reset of Simrad devices Verify that the network is well terminated Yard commissioning with export of device information to Excel Content Cable connection...3 Installation from CD...3 Getting started...4 How to verify correct network termination...5 How to troubleshoot connection errors...6 How to copy device information...6 How to export device information to HTML...6 How perform factory reset of devices...7 How to perform software upgrade...7 Troubleshooting software upgrade...8 How to use the yard commissioning wizard...9 Simnet Diagnostics Appendix A Parameter files Navico software upgrade tool 2
4 Cable connection Make sure the USB connector of the Kvaser Leaf is connected to the PC. Plug the D-connector of the enclosed cable to the Kvaser Leaf. Plug the SimNet connector of the same cable to a free SimNet connection of the SimNet installation to be updated. It is important that the connection of the upgrade hardware follows the SimNet installation rules and is limited to a drop cable length of max 6 meters. Installation from CD The setup process should start automatically when you insert the CD. If it don t you will need to locate the Setup.exe on the CD and double-click it. Continue pressing the Next-button until installation starts. After successful installation, the program icon will be located on the desktop. The software upgrade tool requires that the.net Framework 2.0 is installed on the computer. If it is not installed, the setup.exe will detect this and prompt you to install it. You must be connected to Internet to install.net Framework 2.0. Navico software upgrade tool 3
5 Press the Accept button to start installation of.net Framework 2.0. Getting started Start the Software Upgrade tool by double clicking the program icon on the desktop. At startup, the program will search for a connected Kvaser Leaf so that it can be connected to a SimNet network running on a CAN bus. After startup a screen similar to this will be displayed: Navico software upgrade tool 4
6 The device list will display an overview of every device found on the SimNet network. The connection status can be found in the lower right of the screen. How to verify correct network termination If the network is not terminated correctly, you will be notified on the status bar: The Network termination problems message will persist as long as error frames are detected on the network. More details on the network status can be found using Tools Simnet Diagnostics Navico software upgrade tool 5
7 How to troubleshoot connection errors At startup time, the Software Upgrade will try to connect to CAN bus using the Kvaser Leaf USB device. The connection status will be shown at the status bar. Here we will present some connection errors and their solution. This means that the Kvaser Leaf USB device is not installed or that the Kvaser Leaf USB cable is not inserted into the installed USB port at your PC. You need to make sure that the USB cable is inserted into the same USB port that you used when the Kvaser Leaf USB device was installed. Exit the Software Upgrade tool and correct the situation. This means that the Kvaser Leaf USB device is installed correct but that it is already used by another application on your PC. Please close any other application that can be using the Kvaser Leaf USB device and restart the Software Upgrade tool. How to copy device information Pressing Ctrl+C will copy the device name, software version and serial number for all devices in the list to the clipboard. Alternatively use Edit Copy device info. Then it can be pasted into any documents (Excel, Word etc) by pressing Ctrl+V. How to export device information to HTML Device information for all devices on the network can be exported to HTML-file using the menu File Export to HTML. The HTML-file will contain detailed information. Navico software upgrade tool 6
8 How perform factory reset of devices Select the device(s) you want to reset and use Tools Factory reset. Please note that the factory reset only applies to Simrad products. Performing a factory reset will set all parameters of the actual device(s) back to default settings. How to perform software upgrade This tool can reprogram or upgrade software on all products supporting the Navico NDP2k1) protocol for Software Upgrade. At present time it will only apply to Simrad products produced in 2007 or later. Supported products (November 2007) are AP24, AP28, AC12, AC42, SG05, RF25, RC42, FC40, IS20 Graphic, IS20 Combi, IS20 Analog Compass, IS20 Wind, IS20 Tack and IS20 Rudder. Before you can start the software upgrade wizard, you need to open a Sofware Upgrade Package (SWUP) for the actual product. This can be done by File Open, or by pressing the No package loaded click here sign. You can also select a SWUP from the list of recently used files found on the File menu. Select the device you intend to upgrade by clicking on the checkbox for the actual device. Multiple product of the same type can be upgraded simultaneously. When a device is selected, the device icon will change to. Click on the Upgrade wizard-button. Follow the on screen instructions in the wizard. When the software upgrade starts, a progress bar will be displayed in the wizard: Navico software upgrade tool 7
9 After a successful upgrade, the device will verify the new software by calculating a checksum. If the checksum is correct, the device icon will change to. In the case of an incorrect checksum or if the upgrade process was interrupted or aborted, the device icon will display. Repeat the above if you want to upgrade other products on the list. Troubleshooting software upgrade The software upgrade process will normally complete without any problems. To minimize the risk of failure, please close down all other PC applications running on your computer. In the case of an unsuccessful upgrade, the device may be in a state where it seems to be completely lost or dead. To be able to reprogram it again, you may need to unplug the device from the network and connect it as a stand alone unit directly to the SimNet connector of the upgrade tool with separate SimNet power and termination. Navico software upgrade tool 8
10 How to use the yard commissioning wizard The commissioning wizard is used to generate an Excel report of all devices on the SimNet bus, including serial number and software version. Press the Commissioning wizard button to get started. The first time you run the commissioning wizard, you will be prompted to select the folder where the log file and Excel reports will be saved. Select an existing folder, or make a new. Press OK to continue. Navico software upgrade tool 9
11 Before the wizard can start, we need to determine the installed Excel language. If this cannot be done automatically, you will be prompted to select it from a list. The first page on the wizard is used to verify that the connection to the CAN bus is OK. There should only be green markings. If everything seems to be OK, press Next to continue. Navico software upgrade tool 10
12 On the second wizard page you select the boat type and enter the hull number. If the boat type is not in the list, just enter a new type directly in the text field, or click on the New-button. Select the boat dealer and destination country from the list. If the boat dealer is not in the list, just enter the information directly in the text field. Navico software upgrade tool 11
13 Clicking the Next button will create an Excel sheet with the information provided at Step 2 and 3. Device information (name, version and serial) from all devices on the SimNet bus will be added to the sheet. Notice that the filename is given automatically and consists of the boat type, hull number and country code. The file is saved in the selected log folder. The commissioning wizard will go to the next page. Navico software upgrade tool 12
14 In this page you select the devices that should be reset to factory defaults (see below) after the installation has been completed. The Plug and Play reset is used to reset all source selections on devices complying with the SimNet Plug & Play standard. Plug and Play reset can be useful if for instance a preliminary wind vane has been used for system testing and the mast with a final wind vane is mounted later on. If any of the boxes are checked, the text on the Nextbutton changes to Reset. Pressing Next/Reset button will take you to the next step in the wizard. If the instrument language differs from the language in the destination country, you will be prompted to switch. Navico software upgrade tool 13
15 Default instrument units are imperial. If the destination country uses metric units, you will be prompted to switch units to metric. The effect would be: Depth: Feet Meters Volume: Gallons Litres Temperature: Fahrenheit Celsius The next page is the sea trial parameter setting page. This page can be used to command the autopilot sea trial settings. If these settings are known for a given boat type, they can be provided in a parameter file. The Yard Commissioning Wizard will search for a file named <boat type>_params.xml where <boat type> refers to the boat type entered at Step 2 of the wizard. Navico software upgrade tool 14
16 Parameter files for different boat types should be put in a Params folder as illustrated above. See Appendix A for an explanation of how to make the parameter files for different boat types. Clicking on the Set default parameters or Skip button takes you to the final page of the wizard. On the final page of the wizard, a summary of the commissioning process will be presented. 1) NDP2k: Navico Data Protocol compatible to NMEA2000 Navico software upgrade tool 15
17 Simnet Diagnostics You can use the Simnet Diagnostics dialog to get a quick overview of the status and activity on the network. Open the dialog using meny Tools->Simnet Diagnostics. Data CAN Status Tx Status Rx Status Frames / s Busload Tx errors Rx errors Rx overflow Error frames/s Description Read the network connection status of the software upgrade tool. The transmit status of the software upgrade tool. The receive status of the software upgrade tool. Total number of frames How many percent of the network that is being utilized. CAN tx error counter read from the CAN controller in the Kvaser dongle. CAN rx error counter read from the CAN controller in the Kvaser dongle. Number of frames that could not be received into the software upgrade tool. The number of error frames read on the network last second. Navico software upgrade tool 16
18 Appendix A Parameter files Parameter files are edited in a text editor like Notepad. Use the sample file provided in the Samples folder as a base. Quick instructions Copy the sample file from the Samples folder into the Params folder. Rename the file to <boattype>_params.xml Edit the parameter values in the new file. Detailed instructions Copy the sample file from the Samples folder into the Params folder. The sample file is called BoatX_Params.xml. The Samples and Params folders are found in the Software Upgrade application directory. On an English Windows PC this will be C:\Program Files\Navico Egersund AS\Software Upgrade. Rename the file to <boattype>_params.xml. Change <boattype> with the actual name you use as boattype in the commissioning wizard. So if you have a boattype called 320, then the corresponding parameter file should be named 320_Params.xml. Edit the parameter values in the new file. Use a text editor like notepad. Rightclick on the parameter file in My Computer / Explorer and choose Open with and select Notepad. When the file is opened you will see something like this Navico software upgrade tool 17
19 Change the value for each of the parameters so that it corresponds to the sea trial parameter values in the Autopilot (AP24, AP28 or similar). In order to know which values to use you need to perform a real sea trial with this or a similar boat. Navico software upgrade tool 18
20 Navico Software Upgrade Tool, Doc.no
Simrad Marine Electronics. Setup and Commissioning Instructions for Boatbuilders and Dealers
Simrad Marine Electronics Setup and Commissioning Instructions for Boatbuilders 18_8_2010 1. Introduction and Contents The purpose of this document is to set out, in clear and simple instructions, the
More informationManual. Simrad IS70/IS80 Rudder Indicators RI70 and RI80. English
Manual Simrad IS70/IS80 Rudder Indicators RI70 and RI80 English www.simrad-yachting.com A brand by Navico - Leader in Marine Electronics Manual Simrad IS70/IS80 Rudder indicators RI70 and RI80 English
More informationIS35 Color Display. User Manual ENGLISH. simrad-yachting.com
IS35 Color Display User Manual ENGLISH simrad-yachting.com Preface Navico is continuously improving this product, therefore we retain the right to make changes to the product at any time which may not
More informationManual. Simrad IS70/IS80 RPM Indicators RPM70 and RPM80 Speed Indicators SP70 and SP80. English
Manual Simrad IS70/IS80 RPM Indicators RPM70 and RPM80 Speed Indicators SP70 and SP80 English www.simrad-yachting.com A brand by Navico - Leader in Marine Electronics Manual Simrad IS70/IS80 RPM indicators
More informationManual. Network Expansion Port 2 NEP-2. English. Brands by Navico - Leader in Marine Electronics
Manual Network Expansion Port 2 NEP-2 English www.lowrance.com www.simrad-yachting.com Brands by Navico - Leader in Marine Electronics Disclaimer As Navico is continuously improving this product, we retain
More informationTechnical Bulletin DS2
Product: DS-Matrix Software TB 221 Date: July 25 th, 2012 Subject: How to Upgrade DS-Matrix Software This document describes the procedure for upgrading the DS-Matrix software. If you are upgrading from
More informationTemperature-Humidity Sensor Configuration Tool Rev. A 1/25/
Rev. A 1/25/213 172 Contents Contents Temperature-Humidity Sensor Configuration Tool... 3 Read Sensor Screen... 3 Manual Calibration Screen... 4 Register View Screen... 5 Modbus Registers... 6 Reprogram
More informationSimrad NSS evo2 & NSO evo2 Software upgrade instructions
Simrad NSS evo2 & NSO evo2 Software upgrade instructions ENGLISH For versions 52.1.103 and above www.simrad-yachting.com Preface As Navico is continuously improving this product, we retain the right to
More informationDBT-120 Bluetooth USB Adapter
DBT-120 Bluetooth USB Adapter Rev.2.1 (09/25/2002) 2 Contents Introduction... 5 Package Contents... 6 Installing Bluetooth Software... 6 Hardware Installation... 8 Introduction to Bluetooth Software...
More informationThis guide provides instructions in the installation and configuration of XrayVision DCV.
Apteryx Inc. 313 S. High St. Suite 200 Akron, OH 44308 330-376-0889 voice 330-376-0788 fax sales@apteryx.com www.apteryx.com XrayVision DICOM Capture View (DCV) Installation Guide Abstract Abstract Abstract
More informationBESTCOMSPlus Software
9440300990 Rev P 123 General Description BESTCOMSPlus is a Windows -based, PC application that provides a user-friendly, graphical user interface (GUI) for use with Basler Electric communicating products.
More informationHUMAC2015 Software Installation Instructions
1. Program Requirements 1.1. Available USB 1.1 or 2.0 port. HUMAC2015 Software Installation Instructions 101 Tosca Drive Stoughton, MA 02072 USA (Phone) 781.297-2034 (FAX) 781.297-2039 (Web) www.csmisolutions.com
More informationRev T 237
9424200996 Rev T 237 BESTCOMSPlus is a Windows -based, PC application that provides a user-friendly, graphical user interface (GUI) for use with Basler Electric communicating products. The name BESTCOMSPlus
More informationEXPRESS. Users Guide. Version 3.5
EXPRESS Users Guide Version 3.5 Table of Contents 1 System Overview... 3 2 System Requirements... 3 3 Contents in ECMTUNE System Box... 3 4 Installation Information... 4 5 Registration Information... 7
More informationSpectrometer Visible Light Spectrometer V4.4
Visible Light Spectrometer V4.4 Table of Contents Package Contents...3 Trademarks...4 Manual Driver and Application installation...5 Manual Application Installation...6 First Start of the Application...8
More informationInstallation of Hot Disk v 7.3 and later on a PC with Windows 7, 8 or 10
Installation Instruction for Hot Disk TPS 7 2.1 2017-05-09 1(44) Installation of Hot Disk v 7.3 and later on a PC with Windows 7, 8 or 10 Installation Instruction for Hot Disk TPS 7 2.1 2017-05-09 2(44)
More informationWinMarkpro v6 for the FH Marking Head Quick Start Guide
Laser Marking Software (WinMark ): Important Prior to installation of the WinMark pro laser marking software on your computer, review the requirements in the WinMark pro Operation Manual, remove power
More informationNetwork License Manager and Client Toolchain. Installation Guide
Network License Manager and Client Toolchain Contents This guide is intended to help you to install HEW and the Network License Manager and obtain a license key (if entitled). It will cover: 1. Installing
More informationBoxed messages as shown below need your special attention. Read them carefully.
Introduction Thank you for choosing MEQNET WINDRIVER for Lactate Pro TM 2. This Operating Manual explains how to use this software in order to obtain blood lactate data stored in lactate analyzers manufactured
More informationRoastLogger Arduino/TC4 driver installation for Windows 9/10/13 By John Hannon (JackH) at Homeroasters.org
This procedure was written for the Arduino Uno board with the TC4 shield. Please check the Arduino site for software if you are using a different model. I have not tested it, but this procedure should
More informationUSER MANUAL for USB Data Link
Driver Installation Under Win 95 OSR2.1 1.Step1: Double click "My Computer" "System Properties" "Device Manager" Step2: While installing USB Data Link Cable under Windows 95 OSR2.1 mode, make sure "Universal
More informationManual. Simrad AP26 and AP27 Autopilots for Volvo Penta IPS system
Manual Simrad AP26 and AP27 Autopilots for Volvo Penta IPS system English Sw.1.2 www.simrad-yachting.com A brand by Navico - Leader in Marine Electronics Instruction manual Instruction Manual This manual
More informationLabChip EZ Reader V3.0 SP2 Software Release Notes
LabChip EZ Reader V3.0 SP2 Software Release Notes Installation Notes... 2 Starting the Installation... 2 Upgrading From V2.0, V2.1, or V2.2 to V3.0 SP2... 2 Uninstalling the Software... 3 Documentation...
More informationIS40 PRO. Operator Manual ENGLISH
IS40 PRO Operator Manual ENGLISH Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be reflected in this
More informationRenaming the Projector Adapter Advanced Settings Troubleshooting... 25
010-0730-00 Contents Contents... 2 Introduction... 4 Wireless Range... 4 System Requirements... 4 What's in the Box... 4 Adapter Status Indicators and Details... 5 What s the difference between Wireless
More informationSensorWATCH Basic RH - Wireless Setup Users Help Guide Part Number: A Revision: 1.1.0
SensorWATCH Basic RH - Wireless Setup Users Help Guide Part Number: A53-7974-13-001 Revision: 1.1.0 Page 1 SensorWATCH Basic RH - Wireless SetupUsers Help Guide 1.1.0 Table of Contents 1.0 - Quick Setup
More informationMaris ECDIS900 Backup/ Restore Procedures for SW 4.7.x.x and 4.8.x.x. User Guide ENGLISH. navico-commercial.com
Maris ECDIS900 Backup/ Restore Procedures for SW 4.7.x.x and 4.8.x.x User Guide ENGLISH navico-commercial.com Disclaimer As Navico is continuously improving this product, we retain the right to make changes
More informationSaab TransponderTech. R4 Transponder Upgrade Tool User Instruction
Saab TransponderTech R4 Transponder Upgrade Tool User Instruction i COPYRIGHT The entire contents of this instruction and its appendices, including any future updates and modifications, shall remain the
More informationSage Fixed Assets Single User
Single User 2018.0 Installation guide October 2017 Last updated October 17, 2017 2017 The Sage Group plc or its licensors. All rights reserved. Sage, Sage logos, and Sage product and service names mentioned
More informationInstallation Guide. Cimatron Site Manager 2.0 Release Note
Installation Guide Cimatron Site Manager 2.0 Release Note Installation Guide i Table of Contents Introduction... 1 Cimatron Site Manager Components... 2 Installation... 3 Hardware Requirements... 3 Software
More informationRTE for WIN32. Installation Manual (Rev.7.0) Midas lab
Midas lab REVISION HISTORY Date Revision Chapter Explanation of revision March 11,2000 4.0 RTE4W32 Ver.5.0 (First edition) January 10,2002 4.1 Add Windows XP support (RTE4W32 Ver.5.05) October 29,2002
More informationLIVE PLAYER. VR-5033 (Applicable to VR-5000 software version )
LIVE PLAYER VR-5033 (Applicable to VR-5000 software version 2.07.00) TABLE OF CONTENTS FOREWORD... ii 1. INSTALLATION... 1 1.1 Requirements... 1 1.2 Software Installation... 1 2. PLAYER CONFIGURATION...
More informationNetwork USB over IP Server With 1-USB2.0 Port. User Manual V1.0
Network USB over IP Server With 1-USB2.0 Port User Manual V1.0 1 2 TABLE OF CONTENTS COPYRIGHT...4 1. INTRODUCTION...5 PRODUCT OVERVIEW...5 COMPONENTS AND FEATURES...5 HARDWARE INSTALLATION...5 2. THE
More informationPROFESSIONAL. Users Guide. Version 3.5
PROFESSIONAL Users Guide Version 3.5 Table of Contents 1 System Overview... 3 2 System Requirements... 3 3 Contents in ECMTUNE System Box... 3 4 Installation Information... 4 5 Registration Information...
More informationSetting up FT3000 and version on Windows 7. This is a step by step guide for setting up the FT3000 on a new Windows 7 or 8 PC
Setting up FT3000 and version 3.0.1 on Windows 7 This is a step by step guide for setting up the FT3000 on a new Windows 7 or 8 PC PROBLEM: Computer being updated from XP to WIN 7 or 8. New PC does not
More informationWinMarkpro v6 for the FH Marking Head Quick Start Guide
Important See the FH Flyer Marking Head (MH) Operators Manual for complete installation details and instructions. A PDF version is available online at: http://www.synrad.com/manuals/ manuals_laser.htm.
More informationRST INSTRUMENTS LTD.
RST INSTRUMENTS LTD. VW0420 Analog VW Interface Instruction Manual Ltd. 11545 Kingston St Maple Ridge, BC Canada V2X 0Z5 Tel: (604) 540-1100 Fax: (604) 540-1005 Email: Info@rstinstruments.com i VW0420
More informationInstalling and Setting Up SiteMaster 200 v4 What you need to know.
Installing and Setting Up SiteMaster 200 v4 What you need to know. Table of Contents Important Information 1 System Requirements 2 Installing SiteMaster 200 v4 2 When You First Run SiteMaster 200 v4 4
More informationA Division of Cisco Systems, Inc. PrintServer for USB. with 4-Port Switch. User Guide WIRED PSUS4. Model No.
A Division of Cisco Systems, Inc. WIRED PrintServer for USB with 4-Port Switch User Guide Model No. PSUS4 Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered
More informationField PC 2 Windows OS Update Guide
Field PC 2 Windows OS Update Guide All efforts have been made to ensure the accuracy and completeness of the information contained in this document. RST Instruments Ltd reserves the right to change the
More informationUser s Manual. SLP-F7M Smart Loader Package for the F7M Micro Flow Rate Liquid Flow Meter. No. CP-SP-1423E
No. CP-SP-1423E SLP-F7M Smart Loader Package for the F7M Micro Flow Rate Liquid Flow Meter User s Manual Thank you for purchasing the Smart Loader Package. This manual contains information for ensuring
More informationPro Focus 2202 Software Upgrade Procedure
Pro Focus 2202 Software Upgrade Procedure IMPORTANT: The installation procedure must be carried out only by B-K service personnel or their authorised representatives, who are aware of the hazards involved.
More informationN2KAnalyzer. User s Manual
N2KAnalyzer NMEA 2000 Network Analysis Software User s Manual Revision 1.3.9 Copyright 2008 Maretron, LLP All Rights Reserved Maretron, LLP 9014 N. 23 rd Ave #10 Phoenix, AZ 85021-7850 http://www.maretron.com
More informationN2KExtractor. Maretron Data Extraction Software User s Manual
N2KExtractor Maretron Data Extraction Software User s Manual Revision 3.1.6 Copyright 2017 Maretron, LLP All Rights Reserved Maretron, LLP 9014 N. 23rd Ave #10 Phoenix, AZ 85021-7850 http://www.maretron.com
More informationUSB-Link 2 Technical Guide
www.wattmaster.com USB-Link 2 USB-Link 2 Code: SS0073 Version 4.11 and up Table of Contents General Information... 3 USB-Link 2 Overview...3 System Requirements...3 Quick Guide... 4 USB-Link 2 Driver Installation
More informationIS42J. Operator Manual. ENGLISH
IS42J Operator Manual ENGLISH www.simrad-yachting.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not
More informationWireless Bluetooth USB Dongle User s Guide
Wireless Bluetooth USB Dongle User s Guide 1 Table of Content CHAPTER 1 INTRODUCTION... 5 INTRODUCTION TO BLUETOOTH... 5 INTRODUCTION TO THE WIRELESS BLUETOOTH USB DONGLE... 5 CHAPTER 2 CONTENTS OF PACKAGE...
More information2009 Davis Instruments Corp. All rights reserved. Information in this document is subject to change without notice.
FCC Part 15 Class B Registration Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
More informationTherefore, before you can use the Microlog Inspector application for the first time, you must perform the following steps:
SKF Microlog Inspector Setup Guide Microlog Inspector setup overview The new Microlog Inspector application uses a different, much easier communication method than previous MARLIN versions. With the new
More informationMF9300. Software setup guide
MF900 Software setup guide 0000 79-0 S INTRODUCTION This manual explains how to install and configure the software that is required for the printer function of the machine. The procedure for viewing the
More informationOTC 3210 Update Instructions
OTC 3210 Update Instructions Date of Release: June 2016 New Software ID: ACAC Previous Software ID: D4A8 or 6D2B Note: Scanning Suite should already be installed on the PC. Verify Scan Tool Software Version
More informationTF-3239DL 10/100Mbps PCI Network Adapter
Rev: 1.1.0 1910010553 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks
More informationQuick-Start Guide. BNS Solutions. QSK62P Plus
BNS Solutions Quick-Start Guide QSK62P Plus RS-232 Port Link LED 8-character x 2-line LCD Expansion Port (2) Reset Switch Power LED Thermistor I/O Ring (4) M16C MCU Analog Adjust Pot MCU Crystal Expansion
More informationIMPORTANT. Installing your EASE Scan Tool Software
Thank You for purchasing the EASE Diagnostics Scan Tool! Video install instructions to supplement these print instructions are available, if necessary, at www.fixcarsfaster.com. The videos are broken down
More informationWLAN MIERUZZO BASIC SOFTWARE
DK-5000 Series WLAN MIERUZZO BASIC SOFTWARE USER S MANUAL DK-5005A, DK-5010A, DK-5030A DK-5005B, DK-5010B, DK-5030B DK-5005C, DK-5010C, DK-5030C DK-5005D, DK-5010D, DK-5030D This manual was last revised
More informationSimrad EK80. Software Release Note Introduction
Simrad EK80 Software Release Note 1.12.1 Introduction This document describes the changes introduced with the new software version. Product: EK80 Software version: 1.12.1 This software controls all functionality
More information3M Temperature Logger TL20/TL25 - Software Installation Guide
3M Temperature Logger TL20/TL25 - Software Installation Guide Please follow this procedure to install the TL series software correctly on a personal computer (PC). You have the choice to download the software
More informationOlimex Field Update Kit
Olimex Field Update Kit Table of Contents Overview... 2 To download the field update software... 2 To install the HQLoader software... 2 To install the USB to Serial Converter driver... 2 To install the
More informationMX OPC Server 5.0 Help Documentation
5.0 Help Documentation Contents 1. Introduction to MX OPC Server 1-1 2. Starting MX OPC Server Configuration 2-1 3. Address Space 3-1 4. Alarm Definitions 4-1 5. Simulation Signals 5-1 6. Runtime Operations
More informationInstalling a Trial License
PSCAD Installing a Trial License Written for Certificate and Lockless Legacy Licensing, and for PSCAD X4: Version 4.5 (v4.5.0 to v4.5.5) and Version 4.6 (v4.6.0) November 30, 2015 Revision: 6 Contents
More informationEnGenius Mesh AP Reset Tool Quick Guide
EnGenius Mesh AP Reset Tool Quick Guide Revision : 1.1 Table of Contents EnGenius MESH AP Reset Tool Quick Guide 1. Overview...3 2. Installation Procedure...3 3. Uninstallation Procedure...3 4. Tool Layout...4
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION MS1000 2U STANDARD PROCESSOR P/N 901-10320000 Specifications subject to change without notice 901-10327902 Iss. 1.0 KONGSBERG MESOTECH LTD. 1598 Kebet Way, Port Coquitlam B.C. Canada
More informationMetasys Export Utility Installation Instructions Code No. LIT Software Release 9.0 Issued August 2017
Code No. LIT-12011527 Software Release 9.0 Issued August 2017 Refer to the QuickLIT website for the most up-to-date version of this document. Introduction...2 Summary of Changes...2 Metasys Help Files...2
More information9936A LogWare III. User s Guide. Revision
9936A LogWare III User s Guide Revision 850701 Table of Contents 1 Introduction...1 1.1 Symbols Used... 1 1.2 Conventions... 1 1.3 What is LogWare?... 1 1.4 License Agreement... 2 1.5 Requirements...
More informationUNIVERSAL SOFTWARE. Universal Software. Data Sheet
Universal Software Data Sheet System Requirements: The minimum requirements for using the Software are: 1). Windows XP/Vista/7 2). A minimum of 512 MB RAM 3). 1 GB of hard disk space 4). Microsoft Office
More informationVAPOR PRO COMMUNICATIONS
ARIZONA INSTRUMENT LLC VAPOR PRO COMMUNICATIONS OPERATION MANUAL Version 1.0.3 September 2010 Arizona Instrument LLC 3375 N Delaware Street Chandler, AZ 85225 (800) 528-7411 (602) 470-1414 Fax (480) 804-0656
More informationNavigator Software User s Manual. User Manual. Navigator Software. Monarch Instrument Rev 0.98 May Page 1 of 17
User Manual Navigator Software Monarch Instrument Rev 0.98 May 2006 Page 1 of 17 Contents 1. NAVIGATOR SOFTWARE 2. INSTALLATION 3. USING NAVIGATOR SOFTWARE 3.1 STARTING THE PROGRAM 3.2 SYSTEM SET UP 3.3
More informationMega 100WR ADSL 2+ Router - Easy Start
Mega 100WR ADSL 2+ Router - Easy Start Mega 100WR ADSL 2+ Router - Easy Start Chapter 1 Introduction Thank you for purchasing a Mega 100WR Router. This Easy start guide is a complete guide to configuring
More informationWizard-512 USB DMX-Software + Interface Wizard-1024 USB DMX-Software + Interface
Installation Guide Wizard-512 USB DMX-Software + Interface Wizard-1024 USB DMX-Software + Interface PC-Lighting Control System 1 CONTENT 1 CONTENT...2 2 CHECK YOUR ITEMS...3 3 INSTALLATION PROCESS...3
More informationQ-Stress 4.6 Software Installation & Upgrade
Q-Stress 4.6 Software Installation & Upgrade REF 70-00260-03-ENG Rev A1 Contents Scope 1 Software Installation 3 Software Upgrade 5 Configure Operating System Parameters 7 Stress Application Configuration
More informationINSTALLATION GUIDE. Trimble AllTrak Software
INSTALLATION GUIDE Trimble AllTrak Software INSTALLATION GUIDE Trimble AllTrak software Version 3.5 Revision A_ENG November 2012 F Trimble Navigation Limited Building Construction 5475 Kellenburger Road
More informationNEW YORK AIR BRAKE CORPORATION. Contents
INSTR. Contents 1.0 SCOPE 2 2.0 PURPOSE 2 3.0 DEFINITIONS 3 4.0 REQUIRED EQUIPMENT 4 4.1 PTU INTERFACE KIT (NYAB P/N 784312) 4 4.2 PC REQUIREMENTS 4 4.2.1 PC System Requirements 4 4.2.2 Installed Software
More informationDot Matrix Indicator Programming
Dot Matrix Indicator Programming Preparation: USB Dongle and USB cable. Part No. 100-159 (see page 3 Dongle Installation Instruction ). Display Programmer V2.0 (see page 10 Display Programmer V2 Installation
More informationSedao Ltd. Content User Manual. User Manual to cover all basic functions of Content Manager version 1.5.4
Sedao Ltd Content User Manual User Manual to cover all basic functions of Content Manager version 1.5.4 Contents Introduction... 2 Installing Sedao content manager... 2 Starting Sedao Content Manager...
More informationProSightPC Version 2.0 SP1
Thermo ProSightPC Version 2.0 SP1 Installation Guide XCALI-97246 Revision B August 2011 2011 Thermo Fisher Scientific Inc. All rights reserved. ProSightPC, ProSight PTM, and ProSightHT are trademarks of
More informationUSB DRIVER INSTALLATION GUIDE
USB DRIVER INSTALLATION GUIDE Use these instructions to install the USB drivers and Microsoft synchronization software for your Pathfinder 6057 printer. You need these utilities for your printer to communicate
More informationInstalling and Configuring hopto Work for Citrix. System Requirements Be sure you have these system requirements to install and use hopto Work.
Installing and Configuring hopto Work for Citrix To configure and install hopto Work for Citrix on your Microsoft Windows server, you ll need to have Administrator status. Note: The recommended setup is
More informationInstruction Manual. HH610-SW Application Software for Portable & Bench Meters
Instruction Manual HH610-SW Application Software for Portable & Bench Meters Dear Customer, Thank you for choosing an Omega product. Please read this instruction manual carefully before using the software.
More informationEASE Vehicle Interface Setup Instructions
USB Interface Setup Note: These directions should be followed only after the EASE Scan Tool has been installed. Note: Visit www.fixcarsfaster.com for video setup instructions to supplement these instructions.
More informationXIV. XV. XVI. XVII. Manufacturer reserves the right to change the contents of this manual without notice.
Content Pages I. Software Overview 1 o What is Digitorq?...1 II. Software Requirement and Initial Information 1 III. Reminders 2 IV. Set up Procedures.2 o How to Install the software..3 o Why do we need
More informationUSB driver and Software Installation. UPS Monitoring and Management Software
USB driver and Software Installation UPS Monitoring and Management Software LEN.MAN.SOF.143 Rev.1.00/2008 Installing USB driver and Easy-Mon X for LEONICS UPS 1. Installing and uninstalling the USB driver
More informationSage Fixed Assets Lite Depreciation
Sage Fixed Assets Lite Depreciation 2018.0 Quick start guide October 2017 Last updated October 17, 2017 2017 The Sage Group plc or its licensors. All rights reserved. Sage, Sage logos, and Sage product
More informationOperating Instructions. LMI 5000 LaVA Suite Quick Start Manual. Rev:
LMI 5000 LaVA Suite Quick Start Manual Operating Instructions -1- Notice This manual contains descriptions, drawings and specifications for an Alpha Technologies Product. Equipment or products made prior
More informationWorking with SQL SERVER EXPRESS
Table of Contents How to Install SQL Server 2012 Express Edition... 1 Step 1.... 1 Step 2.... 2 Step 3.... 3 Step 4.... 3 Step 5.... 4 Step 6.... 5 Step 7.... 5 Step 8.... 6 Fixing Database Start-up Connection
More informationSage Fixed Assets Single User. Installation guide
Single User Installation guide Last updated January 15, 2019 2019 The Sage Group plc or its licensors. All rights reserved. Sage, Sage logos, and Sage product and service names mentioned herein are the
More information5.4.8 Optional Lab: Managing System Files with Built-in Utilities in Windows Vista
5.4.8 Optional Lab: Managing System Files with Built-in Utilities in Windows Vista Introduction Print and complete this lab. In this lab, you will use Windows built-in utilities to gather information about
More informationWireless Bluetooth USB Dongle User s Guide
Wireless Bluetooth USB Dongle User s Guide 1 Table of Content CHAPTER 1 INTRODUCTION... 5 INTRODUCTION TO BLUETOOTH... 5 INTRODUCTION TO THE WIRELESS BLUETOOTH USB DONGLE... 5 CHAPTER 2 CONTENTS OF PACKAGE...
More informationTax-Aide TrueCrypt - Version 6.2. Quick Start Guide
Tax-Aide TrueCrypt - Version 6.2 Quick Start Guide Welcome to the Version 6.2 Tax-Aide TrueCrypt Installer. This Quick Start Guide contains what you need to know to obtain and use the Installer when your
More informationRevision PLANET Ethernet Adapter - ENW-9503 User's Guide Rev: 2.0 Part No. EM9503V2
Trademarks Copyright PLANET Technology Corp. 1998. Contents subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corporation. All other trademarks belong to their
More informationVersion 3.00 User s Guide
Xantrex TM XW Config Version 3.00 User s Guide www.schneider-electric.com Xantrex XW Config Version 3.00 User s Guide www.schneider-electric.com Copyright and Contact Copyright 2012 Schneider Electric.
More informationSMS Basic and Advanced Version x Release Notes. Contents:
English SMS Basic and Advanced Version 18.00.000x Release Notes Contents: 1. Minimum System Requirements 2. Installing the Software 3. Upgrading from v17.5 to v18.0 4. New Features 5. Bug Fixes 6. General
More informationfactory field upgrade
CK721-A Network Controller factory field upgrade version 3.1 build 25 24-10025-75 Revision B October, 2013 Copyright 2013 Johnson Controls, Inc. All Rights Reserved No part of this document may be reproduced
More informationDriveRight. Fleet Management Software. Getting Started Guide. CarChip. DriveRight. Drivers. Vehicles. Product #8186
DriveRight Fleet Management Software Getting Started Guide CarChip DriveRight Drivers Vehicles Product #8186 DriveRight Fleet Management Software Getting Started Guide; P/N 8186 Davis Instruments Part
More informationActel FlashPro v3.3. User s Guide. Windows
Actel FlashPro v3.3 User s Guide Windows Actel Corporation, Mountain View, CA 94043-4655 2004 Actel Corporation. All rights reserved. Printed in the United States of America Part Number: 5029138-9 Release:
More informationTable of Contents. Manual Overview
Table of Contents Manual Overview D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions
More informationCover. MATWorX Installation Guide NWA ISSUE 2.1
Cover MATWorX Installation Guide NWA-008862-001 ISSUE 2.1 LIABILITY DISCLAIMER NEC Corporation reserves the right to change the specifications, functions, or features, at any time, without notice. NEC
More informationThis manual is the property of mce systems ltd. No part of this manual may be copied, reproduced, stored in a retrieval system, translated or transmit
This manual is the property of mce systems ltd. No part of this manual may be copied, reproduced, stored in a retrieval system, translated or transmitted in any form or by any means, electronic, mechanical,
More informationNiceLabel Suite. Installation guide. Euro Plus d.o.o. English Edition. Version
NiceLabel Suite Installation guide Euro Plus d.o.o. English Edition Version 021114-04 Copyright 1996-2002 Euro Plus d.o.o. All rights reserved. Contents Contents 1. Installation 1-1 1.1 Contents of the
More informationWindows NT Server Printer Driver Upgrade Instructions
Windows NT Server Printer Driver Upgrade Instructions The steps detailed below describe the most reliable method to upgrade printer driver versions after v1.6.0227a on a Windows NT 4.0 Server that is shared
More information1 / 20. User Manual. Getting started with devention DfuSe USB upgrade tool
1 / 20 User Manual Getting started with devention DfuSe USB upgrade tool 2 / 20 1. Contents 2. Introduction... 3 3. System requirements... 4 4. Package contents... 5 5. How to enter program update interface...
More information