Standard Releasing Spear. Manual B215
|
|
- Vincent Adams
- 6 years ago
- Views:
Transcription
1 Standard Releasing Spear Manual B215
2 NOTES
3 Contents Standard Releasing Spear Overview... 2 Use... 2 Construction... 2 Illustrations Spear Assembly with Flush-Type Mandrel... 3 Spear Assembly with Shoulder-Type Mandrel... 3 Optional Nuts... 3 Operation... 2 Precautions... 2 Internal Cutting... 4 Engaging a Fish... 4 Releasing a Fish... 4 Assembly... 4 Assembly of Releasing Spear... 4 Assembly of Spear Pack-off... 4 Maintenance... 4 Disassembly of Releasing Spear... 5 Disassembly of Spear Pack-off... 5 Principal Dimensions Complete Assemblies and Parts Lists Recommended Tightening Torques Releasing Spear Grapple Range Charts Calculated Strengths Segmented Spear Grapple Assembly Illustration Complete Assemblies and Parts Lists Releasing Spear Pack-off Assembly Assembly... 4 Maintenance... 4 Disassembly... 5 Illustration... 5 Replacement Packing Cups and Thimbles Releasing Spear Stop Sub Assembly Illustration Complete Assemblies and Parts Lists All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. 2nd Printing, August Rev. 1 Page 1 Standard Releasing Spear Manual B215
4 OVERVIEW Logan Standard Releasing Spears provide a positive means to internally engage and retrieve a fish from the well. The design of this rugged, dependable, and inexpensive internal catch fishing tool ensures positive engagement, easy release, and reengagement. USE The Logan Standard Releasing Spear can engage and retrieve tubing, casing, and drill pipe of all sizes. It may be used with other equipment such as spear pack-off assemblies and internal cutters. CONSTRUCTION The Logan Standard Releasing Spear consists of a mandrel, grapple, releasing ring, and a bull nose nut. The size and type of the upper box connection is furnished according to customer specification. Mandrel The mandrel type may be specified as either flush or shoulder. Flush-type mandrels are designed to completely enter the fish. Shoulder-type mandrels provide a positive landing position on top of the fish. The mandrel is made of high strength, specially heat-treated alloy steel. The lower end is threaded to accept a bull nose nut, or the optional sub, mill, and sidehill type nuts. Standard Spear Grapple One-piece spear grapples are designed and manufactured to engage a specific size and weight of tubing, casing, or drill pipe to ensure maximum surface engagement and minimum fish distortion. Segment-Type Spear Grapple The segment-type spear grapple enhances the spear s usefulness by providing an extended catching range beyond the maximum range of the standard one-piece grapple. The Logan Segment-Type Spear Grapple consists of a grapple body, eight grapple segments, two retainer rings, four retainer ring screws, six retainer ring spacers, and sixteen grapple segment screws. Refer to the illustration on page 12. Release Ring The cammed release ring matches the cammed nut ensuring a positive locking device that will not freeze or jam. It is a standard component of the releasing spear. Nut The standard bottom nut is a bull nose nut. Optional nut types sub, mill, and sidehill are available. Refer to the illustrations on page 3. When other tools, such as a spear pack-off assembly or internal cutters, will be utilized below the releasing spear, the sub type nut replaces the standard bull nose nut to provide the required connection. The mill type nut mills away jagged ends of a fish to ensure entry into the fish. It can also effectively drill out sand from a plugged fish. A sidehill type nut is used to align the Releasing Spear with a fish that is imbedded in the side wall of the hole. Heavy Duty Releasing Spears Logan Heavy Duty Releasing Spears (assemblies designated as HD in the parts lists) are used in situations where a swelling of the fish presents a problem. These assemblies have relatively longer mandrels and grapples than standard (STD) spears resulting in more supported wickered area to engage the fish. The longer mandrel and grapple distribute the swelling forces over a greater area, thereby substantially reducing those forces. Heavy Duty Releasing Spears are less prone to damage from swelling of the fish and are actually stronger than a Standard Releasing Spear even though the tensile strength of the mandrels are the same. Stop Sub Assembly The Logan Releasing Spear Stop Sub Assembly is an accessory designed to convert a releasing spear with a flush-type mandrel into a shouldered type spear. It is installed in the box connection at the top of the mandrel when the use of a positive stop is desired or required. A stop ring can be added to increase shoulder diameter. All stop rings are furnished with left-hand threads. See page 32 for more information. Spear Pack-off Assembly Pack-off assemblies are available for all Logan Standard Releasing Spear Assemblies and are designed to efficiently pack off all sizes of drill pipe, tubing and casing. Circulation through the fish is enabled by attaching the Spear Pack-off Assembly to the bottom of the spear with a sub type nut. See pages for more information. OPERATION Precautions Always maintain a moderate upward strain on the fishing string when rotating either to the left or right during operation. It may be necessary to rotate the fishing string more than a full turn to set or release the Releasing Spear in deep or crooked holes. Additional moderate rotation does not harm the Releasing Spear or the operation. Always bump down the full weight of the fishing string before beginning the releasing operation. Manual B215 Standard Releasing Spear Page 2
5 Flush-Type Mandrel Shoulder-Type Mandrel Spear Grapple Spear Grapple Release Ring Release Ring Bull Nose Nut Bull Nose Nut Spear Assembly with Flush Type Mandrel Spear Assembly with Shoulder Type Mandrel Optional Nuts Sidehill Type Nut Sub Type Nut Mill Type Nut Page 3 Standard Releasing Spear Manual B215
6 Internal Cutting When running an internal cutter below the releasing Spear, replace the bullnose nut with a sub type nut. Pipe between the internal cutter and Releasing Spear enables the Spear to remain above the fish during the cutting operation. The Spear is lowered into the cut-off section to retrieve it after the cut has been completed. Engaging a Fish The Logan Releasing Spear is made up to the bottom of the fishing string and lowered to the desired depth into the fish. Rotate the mandrel one full rotation to the left to turn the mandrel through the spear grapple and move the spear grapple into engaging position. Pulling straight up will cause the tapers on the mandrel to expand the spear grapple and allow it to positively engage the fish. Releasing a Fish To release the fish, bump down and make two to three rotations to the right. This right-hand rotation allows the mandrel to move up through the spear grapple thereby placing the spear grapple against the release ring and putting the spear in release position. Combined right-hand rotation with straight upward pull will release the spear from the fish. Continue with slow, right-hand rotation until the Releasing Spear is clear of the fish. ASSEMBLY Assembly of Releasing Spear The Logan Standard Releasing Spear can easily be assembled at the rig site where it will be used. Check all parts to ensure that they are in good working condition before beginning assembly. Make sure the Releasing Spear is the proper size for the operation. (Refer to the Releasing Spear Grapple Range Charts on pages ) Thoroughly clean and lubricate parts. If the tool will be stored for a long period, paint or lubricate the exterior surfaces to prevent corrosion. Refer to the illustration on page 3 and proceed with assembly as follows: 1. Clamp the Releasing Spear horizontally into a suitable vise, securing the upper mandrel joint end. CAUTION: Use only enough gripping action in the vise to break the connections. Avoid making heavy tool marks. 2. Heavily grease the helix of the mandrel. 3. Install the spear grapple on the lower pin end of the mandrel, screwing it on with left-hand (counterclockwise) rotation. Grease the interior of the grapple if it is large. 4. Slip the release ring onto the mandrel with the cams facing downward towards the nut. 5. Apply thread dope or lubricant to the threads on the lower end of the mandrel. Install the nut and tighten. 6. Screw the grapple down the helix until it rests against the release ring and nut. Hand tighten. 7. Paint or lubricate exterior surfaces to prevent corrosion. 8. Tighten all connections to the recommended torque before running the Standard Releasing Spear in the hole. Refer to the Recommended Tightening Torque tables on page 12. Assembly is now complete and the tool is ready for service. Assembly of Spear Pack-off Refer to the illustration on page 5 and proceed with assembly as follows: 1. Clamp the assembly horizontally into a suitable vise, securing the lower end of the pack-off mandrel. CAUTION: Use only enough gripping action in the vise to break the connections. Avoid making heavy tool marks. 2. Slide the stabilizer onto the mandrel. 3. Slide the packing cup onto the mandrel with the large open end facing downward. Make sure it is seated properly on the mandrel shoulder. 4. Slide the thimble onto the mandrel and onto the packing cup. Force it down tightly around the upper end of the packing cup. 5. Apply thread dope or grease to the mandrel threads. Install the adapter sub onto the mandrel and tighten. 6. Paint or lubricate the exterior metal surfaces of the assembly. NOTE: Do not paint or lubricate the packing cup. Paint, sunlight, solvents, and most lubricants are harmful to rubber products. Assembly is now complete. MAINTENANCE Maintenance of the Standard Releasing Spear and Spear Pack-off Assembly is simple, but important. After each use, the tools should be completely disassembled, thoroughly inspected, and repaired as required. Before reassembling, inspect all parts, especially the grapple. Check the wickers for damage and wear to ensure safe operation. Clean and lubricate parts as they are reassembled. Grease or paint the exterior to prevent corrosion. Examine the packing cup of the Releasing Spear Pack-off Assembly for wear or damage. Replace the packing cup if necessary. (Refer to pages for packing cup and thimble part numbers.) Manual B215 Standard Releasing Spear Page 4
7 NOTE: Do not paint or lubricate the packing cup. Paint, sunlight, solvents, and most lubricants are harmful to rubber products. Disassembly of Releasing Spear Refer to the illustration at right and proceed with disassembly as follows: 1. Clamp the Releasing Spear horizontally into a suitable vise and secure the upper mandrel joint end. CAUTION: Use only enough gripping action in the vise to break the connections. Avoid making heavy tool marks. 2. Loosen and remove the nut or spear pack-off-assembly. 3. Slide the release ring from the mandrel. 4. Remove the spear grapple by screwing it down the helix with righthand (clockwise) rotation. Disassembly is now complete. Disassembly of Spear Pack-off Refer to illustration at right and proceed with disassembly as follows: 1. Clamp the assembly horizontally into a suitable vise and secure the lower end of the pack-off mandrel. Adapter Sub Thimble Packing Cup Stabilizer (removable) Pack-off Mandrel CAUTION: Use only enough gripping action in the vise to break the connections. Avoid making heavy tool marks. 2. Loosen and remove the adapter sub. 3. Slide off the thimble. 4. Remove the packing cup. Logan Releasing Spear Pack-off Assembly 5. Remove the stabilizer. Disassembly is now complete. Page 5 Standard Releasing Spear Manual B215
8 STANDARD RELEASING SPEARS PRINCIPAL DIMENSIONS B C E G F A H I J SHOULDER TYPE SPEAR SHOULDER FLUSH TYPE ONLY TYPE ONLY MANDREL SPEAR SIZE CLASS ID A B C D E F OD Pipe Standard 1-1/2 4-1/ /8 F OD Pipe Standard 1-5/ /16 F OD Tubing Standard 1-13/ /32 3-5/16 F OD Tubing Standard 2-1/ /16 F /8 OD Drill Pipe Standard 3-1/ /32 F /8 OD Tubing Standard 3/8 3-1/ /4 F /8 OD Tubing Standard 3/8 3-1/ F /8 OD Tubing Standard 3/8 3-3/ /4 6-3/4 F /8 OD Tubing Heavy Duty 3/8 3-3/ /4 9 F /2 OD Tubing Standard 1/2 3-3/ /2 10-1/2 12 F /2 OD Drill Pipe Heavy Duty 1/2 3-3/ /2 10-1/2 9-3/4 F OD Tubing Light Duty 3/4 3-3/4 7-1/ /8 8-1/8 F OD Tubing Standard 3/4 4-1/8 7-1/ /2 12 F /2 OD Tubing Light Duty 3/4 4-1/ /2 3-3/4 9-3/4 F /2 OD Tubing Standard 3/4 4-1/ /2 9-1/2 14-1/4 F OD Casing Light Duty 7/8 4-3/ /2 9-1/2 9-3/4 F OD Casing Standard 7/ / /4 F OD Casing Light Duty / F OD Casing Standard / F OD Casing Standard /2 16-1/2 14-5/8 F OD Casing Heavy Duty /2 13-1/2 21-3/8 F /8 OD Casing Standard 2-3/4 8-5/ /8 14-5/8 F /8 OD Casing Heavy Duty 2-3/4 8-5/8 20-7/8 21-3/8 F /8 OD Casing Standard 2-13/16 9-5/8 15-3/ /8 14-5/8 F /8 OD Casing Standard 2-13/16 9-5/8 20-7/8 21-3/8 F /8 OD Casing Standard 3-1/2 13-3/8 17-7/ /8 16-7/8 Notes: 1) For Flush or Shoulder type, specify O.D. of shoulder, A 2) Mandrel length desired, C Manual B215 Standard Releasing Spear Page 6
9 STANDARD RELEASING SPEARS PRINCIPAL DIMENSIONS D E G M F H L H K FLUSH TYPE SPEAR SHOULDER FLUSH TYPE ONLY TYPE ONLY MANDREL F G H I J K L M F1000 7/8 2-3/8 11/16 9-5/8 15-1/4 3/16 F /8 2-1/2 15/ / /16 1/4 F /8 2-1/2 1-1/8 7-11/ /16 3/8 F /4 5-5/8 1-3/8 10-5/ /16 7/16 F /4 6-17/ / /16 5/8 F /4 6-5/8 1-7/ /8 23-3/8 5/8 F /4 6-5/8 1-7/8 14-1/4 25-5/8 22-5/8 5/8 F / / /4 23-3/4 21 5/8 F / / / /4 5/8 F / / /2 32-1/2 5/8 F /8 8-1/8 2-1/2 16-5/8 31-1/8 5/8 F / /4 13-5/8 26-5/8 26-1/2 5/8 F / /4 18-1/2 31-1/2 31-1/2 5/8 F /2 10-3/4 3-5/8 16-3/ F / /8 21-1/4 35-3/4 33-3/4 3/4 F /2 10-5/8 4-1/ /4 31-7/8 29-7/8 13/16 F /2 10-5/8 4-1/ /4 36-3/8 36-7/8 13/16 F / /8 39-3/ /16 3-5/16 1-1/4 F / / /16 1-1/4 F /2 12-3/4 5-11/ /4 3-1/2 1-5/8 F /2 12-3/4 5-11/ /8 53-3/ /2 1-5/8 F /2 13-3/4 7-1/4 26-1/8 53-7/8 49-1/ /8 F /2 13-3/4 7-1/ /4 1-5/8 F / /4 25-1/ /4 6-1/4 1-5/8 F /2 13-3/4 8-1/ /4 1-5/8 F / /4 27-3/8 53-3/4 51-1/4 7-3/4 1-5/8 Notes: 1) For Flush or Shoulder type, specify O.D. of shoulder, A 2) Mandrel length desired, C Page 7 Standard Releasing Spear Manual B215
10 LOGAN STANDARD RELEASING SPEAR NOMINAL CATCH SIZE O.D /8 2-3/8 2-3/8 SPEAR O.D. 11/16 7/8 NOM 1-1/8 1-3/8 1-11/16 1-7/8 1-7/8 SPEAR I.D. 3/8 3/8 DUTY CLASS STD STD STD STD STD STD STD COMPLETE ASSEMBLY Logan Part No Bowen No REPLACEMENT PARTS TOP SUB Logan Part No. F1000-A F1001-A F1002-A Bowen No A 19351A 11196A MANDREL (FLUSH TYPE) Logan Part No. F1000 F1001 F1002 F1004 F1005 F1007 F1008 Bowen No B 19351B 11196B GRAPPLE* Logan Part No. F3000 F3001 F3002 F3004 F3005 F3007 F3008 Bowen No RELEASE RING Logan Part No. F4000 F4001 F4002 F4004 F4005 F4007 F4007 Bowen No BULL NOSE NUT Logan Part No. F5000 F5001 F5002 F5004 F5005 F5007 F5007 Bowen No OPTIONAL PARTS MANDREL (SHOULDER TYPE) Logan Part No. F1000 F1001 F1002 F1004 F1005 F1007 F1008 Bowen No MANDREL EXTRA LENGTH PER INCH (C & D) ACCESSORIES MILL TYPE NUT Logan Part No. F5000-A F5001-A F5002-A F5004-A F5005-A F5007-A F5007-A Bowen No A A A 9919-A 9648-A 1346-A 1346-A SUB TYPE NUT Logan Part No. F5000-B F5001-B F5002-B F5004-B F5005-B F5007-B F5007-B Bowen No B B B 9919-B 9648-B 1346-B 1346-B SIDE HILL NUT Logan Part No. F5000-C F5001-C F5002-C F5004-C F5005-C F5007-C F5007-C Bowen No C C C 9919-C 9648-C 1346-C 1346-C When ordering, please specify: (1) Name and part number of assembly or part (2) Size and type of top connection (3) Size and weight(s) of pipe to catch (4) Flush or Shoulder type (specify O.D. of shoulder, A ) (5) Mandrel length desired C (6) Thread size and type of nut, if wanted Recommended Spare Parts: (1) 2 Grapples for each catch size All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Manual B215 Standard Releasing Spear Page 8
11 LOGAN STANDARD RELEASING SPEAR NOMINAL CATCH SIZE O.D. 2-7/8 2-7/8 2-7/8 3-1/2 3-1/2 4 4 SPEAR O.D. 2-5/16 2-5/16 2-5/ /16 2-1/2 3-1/4 3-1/4 SPEAR I.D. 3/8 3/8 3/8 1/2 1/2 3/4 3/4 DUTY CLASS STD STD LH HD STD HD LD STD COMPLETE ASSEMBLY Logan Part No Bowen No REPLACEMENT PARTS TOP SUB Logan Part No. Bowen No. MANDREL (FLUSH TYPE) Logan Part No. F1009 F10095 F1010 F1012 F1013 F1014 F1015 Bowen No GRAPPLE * Logan Part No. F3009 F30095 F3010 F3012 F3013 F3014 F3015 Bowen No RELEASE RING Logan Part No. F4009 F4009 F4009 F4012 F4013 F4015 F4015 Bowen No BULL NOSE NUT Logan Part No. F5009 F50095 F5009 F5012 F5013 F5014 F5015 Bowen No OPTIONAL MANDREL (SHOULDER TYPE) Logan Part No. F1009 F10095 F1010 F1012 F1013 F1014 F1015 Bowen No MANDREL EXTRA LENGTH PER INCH (C & D) ACCESSORIES MILL TYPE NUT Logan Part No. F5009-A F50095-A F5010-A F5012-A F5013-A F5014-A F5015-A Bowen No A 1228-A 9413-A 533-A 9488-A SUB TYPE NUT Logan Part No. F5009-B F50095-B F5009-B F5012-B F5013-B F5014-B F5015-B Bowen No B 1228-B 9413-B 533-B 9488-B SIDE HILL NUT Logan Part No. F5009-C F50095-C F5009-C F5012-C F5013-C F5014-C F5015-A Bowen No C 1228-C 9413-C 533-C 9488-C When ordering, please specify: (1) Name and part number of assembly or part (2) Size and type of top connection (3) Size and weight(s) of pipe to catch (4) Flush or Shoulder type (specify O.D. of shoulder, A ) (5) Mandrel length desired C (6) Thread size and type of nut, if wanted Recommended Spare Parts: (1) 2 Grapples for each catch size All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Page 9 Standard Releasing Spear Manual B215
12 LOGAN STANDARD RELEASING SPEAR NOMINAL CATCH SIZE O.D. 4-1/2 4-1/ SPEAR O.D. 3-5/8 3-5/8 4-1/32 4-1/ /4 SPEAR I.D. 3/4 3/4 7/ DUTY CLASS LD STD LD STD LD STD STD COMPLETE ASSEMBLY Logan Part No Bowen No REPLACEMENT PARTS TOP SUB Logan Part No. Bowen No. MANDREL (FLUSH TYPE) Logan Part No. F1016 F1017 F1018 F1019 F1022 F1023 F1024 Bowen No GRAPPLE * Logan Part No. F3016 F3017 F3018 F3019 F3022 F3023 F3024 Bowen No RELEASE RING Logan Part No. F4017 F4017 F4019 F4019 F4023 F4023 F4024 Bowen No BULL NOSE NUT Logan Part No. F5017 F5017 F5019 F5019 F5023 F5023 F5024 Bowen No OPTIONAL PARTS MANDREL (SHOULDER TYPE) Logan Part No. F1016 F1017 F1018 F1019 F1022 F1023 F1024 Bowen No MANDREL EXTRA LENGTH Logan Part No. PER INCH (C & D) Bowen No. ACCESSORIES MILL TYPE NUT Logan Part No. F5017-A F5017-A F5019-A F5019-A F5023-A F5023-A F5024-A Bowen No A A 1335-A 1335-A 9719-A 9719-A 9269-A SUB TYPE NUT Logan Part No. F5017-B F5017-B F5019-B F5019-B F5023-B F5023-B F5024-B Bowen No B B 1335-B 1335-B 9719-B 9719-B 9269-B SIDE HILL NUT Logan Part No. F5017-C F5017-C F5019-C F5019-C F5023-C F5023-C F5024-C Bowen No C C 1335-C 1335-C 9719-C 9719-C 9269-C When ordering, please specify: (1) Name and part number of assembly or part (2) Size and type of top connection (3) Size and weight(s) of pipe to catch (4) Flush or Shoulder type (specify O.D. of shoulder, A ) (5) Mandrel length desired C (6) Thread size and type of nut, if wanted Recommended Spare Parts: (1) 2 Grapples for each catch size All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Manual B215 Standard Releasing Spear Page 10
13 LOGAN STANDARD RELEASING SPEAR NOMINAL CATCH SIZE O.D /8 8-5/8 9-5/8 9-5/8 13-3/8 SPEAR O.D. 5-3/4 7-1/4 7-1/4 8-1/4 8-1/4 11-3/4 SPEAR I.D /4 2-3/4 2-13/ /16 3-1/2 DUTY CLASS HD STD HD STD HD STD COMPLETE ASSEMBLY Logan Part No Bowen No REPLACEMENT PARTS TOP SUB Logan Part No. Bowen No. MANDREL (FLUSH TYPE) Logan Part No. F1026 F1029 F1030 F1032 F1034 F1035 Bowen No GRAPPLE * Logan Part No. F3026 F3029 F3030 F3032 F3034 F3035 Bowen No RELEASE RING Loagn Part No. F4024 F4029 F4029 F4032 F4032 F4033 Bowen No BULL NOSE NUT Logan Part No. F5024 F5029 F5029 F5032 F5032 F5033 Bowen No OPTIONAL PARTS MANDREL (SHOULDER TYPE) Logan Part No. F1026 F1029 F1030 F1032 F1034 F1035 Bowen No MANDREL EXTRA LENGTH PER INCH (C & D) ACCESSORIES MILL TYPE NUT Logan Part No. F5024-A F5029-A F5029-A F5032-A F5032-A F5035-A Bowen No A 9384-A 9384-A 9284-A 9284-A A SUB TYPE NUT Logan Part No. F5024-B F5029-B F5029-B F5032-B F5032-B F5035-B Bowen No B 9384-B 9384-B 9284-B 9284-B B SIDE HILL NUT Logan Part No. F5024-C F5029-C F5029-C F5032-C F5032-C F5035-C Bowen No C 9384-C 9384-C 9284-C 9284-C C When ordering, please specify: (1) Name and part number of assembly or part (2) Size and type of top connection (3) Size and weight(s) of pipe to catch (4) Flush or Shoulder type (specify O.D. of shoulder, A ) (5) Mandrel length desired C (6) Thread size and type of nut, if wanted Recommended Spare Parts: (1) 2 Grapples for each catch size All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Page 11 Standard Releasing Spear Manual B215
14 LOGAN STANDARD RELEASING SPEAR NOMINAL CATCH SIZE O.D /8 8-5/8 9-5/8 9-5/8 13-3/8 SPEAR O.D. 5-3/4 7-1/4 7-1/4 8-1/4 8-1/4 11-3/4 SPEAR I.D /4 2-3/4 2-13/ /16 3-1/2 DUTY CLASS HD STD HD STD HD STD COMPLETE ASSEMBLY Logan Part No Bowen No REPLACEMENT PARTS TOP SUB Logan Part No. Bowen No. MANDREL (FLUSH TYPE) Logan Part No. F1026 F1029 F1030 F1032 F1034 F1035 Bowen No GRAPPLE * Logan Part No. F3026 F3029 F3030 F3032 F3034 F3035 Bowen No RELEASE RING Loagn Part No. F4024 F4029 F4029 F4032 F4032 F4033 Bowen No BULL NOSE NUT Logan Part No. F5024 F5029 F5029 F5032 F5032 F5033 Bowen No OPTIONAL PARTS MANDREL (SHOULDER TYPE) Logan Part No. F1026 F1029 F1030 F1032 F1034 F1035 Bowen No MANDREL EXTRA LENGTH PER INCH (C & D) ACCESSORIES MILL TYPE NUT Logan Part No. F5024-A F5029-A F5029-A F5032-A F5032-A F5035-A Bowen No A 9384-A 9384-A 9284-A 9284-A A SUB TYPE NUT Logan Part No. F5024-B F5029-B F5029-B F5032-B F5032-B F5035-B Bowen No B 9384-B 9384-B 9284-B 9284-B B SIDE HILL NUT Logan Part No. F5024-C F5029-C F5029-C F5032-C F5032-C F5035-C Bowen No C 9384-C 9384-C 9284-C 9284-C C When ordering, please specify: (1) Name and part number of assembly or part (2) Size and type of top connection (3) Size and weight(s) of pipe to catch (4) Flush or Shoulder type (specify O.D. of shoulder, A ) (5) Mandrel length desired C (6) Thread size and type of nut, if wanted Recommended Spare Parts: (1) 2 Grapples for each catch size All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Page 11 Standard Releasing Spear Manual B215
15 LOGAN SEGMENTED SPEAR GRAPPLE ASSEMBLY Retainer Ring Screw 4 required Retainer Ring Screw Spacer 4 required Segment Body Retainer Ring 2 required Grapple Segment Screw 16 required Grapple Segments 8 required LOGAN SEGMENTED SPEAR GRAPPLE ASSEMBLY ASSEMBLES TO SPEAR Logan Part No Bowen No CATCH SIZE (PIPE SIZE) 10-3/4 11-3/4 12-3/4 13-3/8 10-3/4 11-3/4 12-3/4 13-3/8 PIPE WEIGHT COMPLETE ASSEMBLY Logan Part No Bowen No GRAPPLE BODY Logan Part No. F3029-A F3030-A Bowen No A A GRAPPLE SEGMENT Logan Part No. F3029-B F3030-B (8 per 1 set) Bowen No B B SEGMENT SCREW Logan Part No. T3000 T3000 Bowen No No. Req d RETAINER RING Logan Part No. T4000 T4000 Bowen No No. Req d 2 2 RETAINER RING SCREW Logan Part No. T5000 T5000 Bowen No No. Req d 4 4 RETAINER RING SCREW Logan Part No. T6000 T6000 SPACER Bowen No No. Req d 4 4 All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Page 13 Standard Releasing Spear Manual B215
16 LOGAN SEGMENTED SPEAR GRAPPLE ASSEMBLY ASSEMBLES TO SPEAR Logan Part No Bowen No CATCH SIZE (PIPE SIZE) 13-3/ / / /8 20 PIPE WEIGHT COMPLETE ASSEMBLY Logan Part No Bowen No GRAPPLE BODY Logan Part No. F3032-A F3034-A Bowen No A A GRAPPLE SEGMENT Logan Part No. F3032-B F3034-B (8 per 1 set) Bowen No B B SEGMENT SCREW Logan Part No. T3001 T3001 Bowen No No. Req d RETAINER RING Logan Part No. T4001 T4001 Bowen No No. Req d 2 2 RETAINER RING SCREW Logan Part No. T5001 T5001 Bowen No No. Req d 4 4 RETAINER RING Logan Part No. T6000 T6000 SCREW SPACER Bowen No No. Req d 4 4 LOGAN SEGMENTED SPEAR GRAPPLE ASSEMBLY ASSEMBLES TO SPEAR Logan Part No Bowen No CATCH SIZE (PIPE SIZE) /8 20 PIPE WEIGHT COMPLETE ASSEMBLY Logan Part No Bowen No GRAPPLE BODY Logan Part No. F3035-A Bowen No A GRAPPLE SEGMENT Logan Part No. F3035-B (8 per 1 set) Bowen No B SEGMENT SCREW Logan Part No. T3002 Bowen No No. Req d 16 RETAINER RING Logan Part No. T4002 Bowen No No. Req d 2 RETAINER Logan Part No. T5002 RING SCREW Bowen No No. Req d 4 RETAINER RING Logan Part No. T6000 SCREW SPACER Bowen No No. Req d 4 All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Manual B215 Standard Releasing Spear Page 14
17 LOGAN RELEASING SPEAR GRAPPLE RANGE CHART LOGAN SPEAR GRAPPLE Logan Part No. F3000 F3000 F3000 F3000 F3000 F3000 F3000 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 3/4 ID & 3/4 Std Pipe.875 to.864 ID.937 ID.957 ID 3/4 X-STG.824 ID 1.0 to 2.25# 1" X-STG Pipe CS Hydril Pipe LOGAN SPEAR GRAPPLE Logan Part No. F3000 F3000 F3000 F3000 F3001 F3001 F3001 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES).982 ID 1" ID 1" Std Pipe 1-1/8 ID.957 ID 1" ID ID ID 1" X-STG Pipe 1" Std Pipe LOGAN SPEAR GRAPPLE Logan Part No. F3001 F3001 F3002 F3002 F3002 F3002 F3002 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) ID ID ID to to to to ID ID ID ID LOGAN SPEAR GRAPPLE Logan Part No. F3002 F3002 F3002 F3002 F3002 F3002 F3002 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 1-3/8 ID ID to 1-1/2 Std Pipe ID 1 9/16 ID to 1-1/4 Tbg ID & 1-5/8 ID ID LOGAN SPEAR GRAPPLE Logan Part No. F3002 F3002 F3002 F3002 F3002 F3002 F3004 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 1-3/4 to ID 1-7/8 to 1-15/16 ID 2 ID ID ID to 1-25/32 ID 1-29/32 1-1/2 X-STG Pipe Note: Grapples are stenciled with nominal catch size. All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Page 15 Standard Releasing Spear Manual B215
18 LOGAN RELEASING SPEAR GRAPPLE RANGE CHART LOGAN SPEAR GRAPPLE Logan Part No. F3004 F3004 F3004 F3004 F3004 F3004 F3004 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 1-1/2 Std Pipe 1-5/8 ID ID ID 1-3/4 to ID ID LOGAN SPEAR GRAPPLE Logan Part No. Bowen No. Price LOGAN SPEAR GRAPPLE Logan Part No. F3004 F3004 F3004 F3004 F3004 F3005 F3005 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) ID ID 1-7/8 ID ID 2 ID to 2-3/8 Drill ID Pipe, 65.5# LOGAN SPEAR GRAPPLE Logan Part No. F3007 F3007 F3007 F3007 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3005 F3005 F3005 F3008 F3008 F3008 F3008 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 1-7/8 & to 2-3/8 Tbg, ID ID to 2-3/8 Tbg, 1-27/32 ID ID 4 to 4.7# Turn Body Turn Body ID 4 to 4.7# Down Down LOGAN SPEAR GRAPPLE Logan Part No. F3007 F3007 F3007 F3007 F3007 F3007 F3007 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3008 F3008 F3008 F3008 F3008 F3008 F3008 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) to 2-1/8 ID 2-7/8 DP, 2-1/4 to 2-17/64 ID 2-5/16 ID 2-7/8 OD ID 9.75 to 10.4# 2-3/16 ID 7.8 to 8.35# DP Note: Grapples are stenciled with nominal catch size. All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Manual B215 Standard Releasing Spear Page 16
19 LOGAN RELEASING SPEAR GRAPPLE RANGE CHART LOGAN SPEAR GRAPPLE Logan Part No. F3007 F3007 F3007 F3007 F3007 F3007 F3007 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3008 F3008 F3008 F3008 F3008 F3008 F3008 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 2-3/8 ID NX 2-3/8 ID 2-7/8 Tbg 2-7/16 ID 2-5/8 ID & 2-5/8 ID & 2-3/4 ID 1/2 Rod 2-7/16 ID #, 2-1/2 ID 2-9/16 ID 2-11/16 ID 2-7/8 OD LOGAN SPEAR GRAPPLE Logan Part No. F3007 F3007 F3007 F3007 F3009 F3009 F3009 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3008 F3008 F3008 F3008 F3010 F3010 F3010 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 3 ID & 3-1/16 ID 3-1/4 ID & 3-11/32 ID 2-3/8 ID 2-3/8 to 2-7/8 Tbg 2-15/16 ID & 3-1/8 ID 3-3/16 ID & 3-9/32 ID 2-7/16 ID #, - NX DRIVE 2-7/8 OD LOGAN SPEAR GRAPPLE Logan Part No. F3009 F3009 F3009 F3009 F3009 F3009 F3009 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3010 F3010 F3010 F3010 F3010 F3010 F3010 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) to 3-1/2 OD 2-11/16 3-1/2 OD 2-13/16 ID & 3-1/2 OD 2-7/8 to 2-15/32 ID 15.5# Drill 2-5/8 ID 12.4 to 13.3# 2-3/4 ID 10.2 to 11.2# 2-15/16 ID Pipe Drill Pipe Drill Pipe Note: Grapples are stenciled with nominal catch size. All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Page 17 Standard Releasing Spear Manual B215
20 LOGAN RELEASING SPEAR GRAPPLE RANGE CHART LOGAN SPEAR GRAPPLE Logan Part No. F3009 F3009 F3009 F3009 F3009 F3009 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3010 F3010 F3010 F3010 F3010 F3010 F3012 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 3-1/2 OD 3-1/2 OD 3-1/8 3-1/ to 3-1/2 ID 3-1/2 OD # Tbg 7.7# Tbg 3-1/16 ID 3-3/16 ID ID # Tbg LOGAN SPEAR GRAPPLE Logan Part No. Bowen No. LOGAN SPEAR GRAPPLE Logan Part No. F3012 F3012 F3012 F3012 F3012 F3012 F3012 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 3-1/2 OD 3-1/8 ID 3-1/4 ID 4 OD 4 OD 4 OD to 7.7 to 9.2# 3-3/16 ID 12.5 to 14.0# 11.0 to 11.6# 9.5 to 11.0# ID Drill Pipe LOGAN SPEAR GRAPPLE Logan Part No. F3014 F3014 F3014 F3014 F3014 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3012 F3012 F3015 F3015 F3015 F3015 F3015 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 3-11/16 ID 3-3/4 ID 4 OD 4 OD 4 OD 3-5/8 ID & 4-1/2 OD 12.5 to 11.0 to 9.5 to 3-9/16 ID 18.1 to 14.0 Tbg 11.6# Tbg 11.0# Tbg 22.0# Tbg Note: Grapples are stenciled with nominal catch size. All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Manual B215 Standard Releasing Spear Page 18
21 LOGAN RELEASING SPEAR GRAPPLE RANGE CHART LOGAN SPEAR GRAPPLE Logan Part No. F3014 F3014 F3014 F3014 F3014 F3014 F3014 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3015 F3015 F3015 F3015 F3015 F3015 F3015 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 4-1/2 OD 4-1/2 OD 4-1/2 OD 4-1/2 OD 5 OD 5 OD 5 Tbg 15.3 to 13.7 to 11.0 to 9.5 to 18.0 to 17.7 to 12.6 to15.0# 18.1# Tbg 15.3# Tbg 13.7# Tbg 11.6# Tbg 21.0# Tbg 18.0# Tbg (4.408 ID) LOGAN SPEAR GRAPPLE Logan Part No. F3014 F3014 F3016 F3016 F3016 F3016 F3016 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3015 F3015 F3017 F3017 F3017 F3017 F3017 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 5 OD 5-1/2 OD 4-1/2 OD 4-1/2 OD 4-1/2 OD 4-1/2 OD 5 OD 11.5# Tbg 14.0 to 15.3 to 13.7 to 11.0 to 9.5 to 18.0 to 17.0# Tbg 18.1# Tbg 15.3# Tbg 13.7# Tbg 11.6# Csg 21.0# Csg LOGAN SPEAR GRAPPLE Logan Part No. F3016 F3016 F3018 F3018 F3018 F3018 F3018 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3017 F3017 F3019 F3019 F3019 F3019 F3019 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 5 OD 5 OD 5 OD 5 OD 5 OD 5 OD 5 OD, 8# 15.0 to 12.6 to 18.0 to 15.0 to 11.5 to 9.0 to 5-1/2 OD 18.0# Csg 15.0# Csg 21.0# Csg 18.0# Csg 15.0# Csg 13.0# Csg 23 to 25# Csg Note: Grapples are stenciled with nominal catch size. All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Page 19 Standard Releasing Spear Manual B215
22 LOGAN RELEASING SPEAR GRAPPLE RANGE CHART LOGAN SPEAR GRAPPLE Logan Part No. F3018 F3018 F3018 F3018 F3018 F3018 F3018 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3019 F3019 F3019 F3019 F3019 F3019 F3019 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 5 1/2 OD 5-1/2 OD 5-1/2 OD 5-3/4 OD 5-3/4, 5-3/4 OD 6 OD 20.0 to 17.0 to 14.0 to 19.5 to # 14.0 to 20.0# Csg to 23.0# Csg 20.0# Csg 17.0# Csg 22.5# Csg 5 1/2 OD 17.0 Csg 23.0# Csg 9.0 to 13.0# Csg LOGAN SPEAR GRAPPLE Logan Part No. F3018 F3018 F3018 F3022 F3022 F3022 F3022 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3019 F3019 F3019 F3023 F3023 F3023 F3023 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 6 OD 6 OD 6-5/8 OD 6 OD 6 OD 6 OD 6 OD 17.0 to 14.0 to 32.0 to 23.0 to 20.0 to 17.0 to 14.0 to 20.0# Csg 17.0# Csg 34.0# Csg 26.0# Csg 23.0# Csg 20.0# Csg 17.0# Csg LOGAN SPEAR GRAPPLE Logan Part No. F3022 F3022 F3022 F3022 F3022 F3022 F3022 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3023 F3023 F3023 F3023 F3023 F3023 F3023 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 6 OD 6-5/8 OD 6-5/8 OD 6-5/8 OD 7 OD 6-5/8 OD 7 OD 10.5 to 28.0 to 26.0 to 24.0 to 38.0 to 20.0 to 33.7 to 14.0# Csg 32.0# Csg 29.0# Csg 28.0# Csg 40.0# Csg 24.0# Csg 38.0# Csg Note: Grapples are stenciled with nominal catch size. All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Manual B215 Standard Releasing Spear Page 20
23 LOGAN RELEASING SPEAR GRAPPLE RANGE CHART LOGAN SPEAR GRAPPLE Logan Part No. F3022 F3022 F3022 F3022 F3022 F3022 F3024 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3023 F3023 F3023 F3023 F3023 F3023 F3026 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 6-5/8 OD 7 OD 7 OD 7 OD 7 OD 7 OD 7" # 17.0 to 29.0 to 26.0 to 22.0 to 20.0 to 17.0 to & 6-5/8 22.0# Csg 33.7# Csg 29.0# Csg 26.0# Csg 23.0# Csg 20.0# Csg 24.0# Csg LOGAN SPEAR GRAPPLE Logan Part No. F3024 F3024 F3024 F3024 F3024 F3024 F3024 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3026 F3026 F3026 F3026 F3026 F3026 F3026 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 7 OD 7 OD 7 OD 7-5/8 OD 7-5/8 OD 7-5/8 OD 8-1/8 OD 26.0 to 22.0 to 13.0 to 33.7 to 26.4 to 14.7 to 32.0 to 35.0# Csg 33.7# Csg 24.0# Csg 45.0# Csg 39.0# Csg 26.4# Csg 42.0#Csg LOGAN SPEAR GRAPPLE Logan Part No. F3024 F3024 F3024 F3024 F3024 F3024 F3024 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3026 F3026 F3026 F3026 F3026 F3026 F3026 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 8 OD 7-9/16 ID 8-5/8 OD 8-5/ /8 OD 9 OD 9-5/8 OD 16.0 to 34.0 to 38.0#, 17.6 to 34.0 to 29.3 to 26.0# Csg 48.0# Csg 9" 55# Csg 29.3# Csg 45.0# Csg 42.0# Csg Note: Grapples are stenciled with nominal catch size. All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Page 21 Standard Releasing Spear Manual B215
24 LOGAN RELEASING SPEAR GRAPPLE RANGE CHART LOGAN SPEAR GRAPPLE Logan Part No. F3024 F3029 F3029 F3029 F3029 F3029 F3029 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3026 F3030 F3030 F3030 F3030 F3030 F3030 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 9-5/8 OD 8-5/8 OD 8-5/ to 8-5/ to 9 OD 19.0# 9-5/8 OD 9-5/8 OD 43.5 to 36.0 to 38.0#, 9 OD 29.3#, 9 OD & 9-5/8 OD 40.0 to 29.3 to 53.5# Csg 48.0# Csg 45.0 to 34.0 to 43.5 to 53.5# Csg 42.0# Csg 55.0# Csg 45.0# Csg 58.0# Csg LOGAN SPEAR GRAPPLE Logan Part No. F * * * * * * Bowen No LOGAN SPEAR GRAPPLE Logan Part No * * * * * * * Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 10-3/4 OD 10-3/4 OD 10-3/4 OD 11-3/4 OD 11-3/4 OD 13-3/8 OD 13-3/8 OD 55.5 to 40.0 to 32.7 to 47.0 to 38.0 to 61.0 to 48.0 to 65.7# Csg 55.5# Csg 48.0# Csg 60.0# Csg 54.0# Csg 85.0# Csg 68.0# Csg LOGAN SPEAR GRAPPLE Logan Part No. F3032 F3032 F3032 F3032 F3032 F3032 F3032 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3034 F3034 F3034 F3034 F3034 F3034 F3034 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 9-5/8 OD 9-5/8 OD 9-5/8 OD 9-5/8 OD 10-3/4 OD 10-3/4 OD 10-3/4 OD 43.5 to 40.0 to 36.0 to 29.3 to 40.0 to 32.7 to 71.0 to 58.0# Csg 53.5# Csg 43.5# Csg 40.0# Csg 55.5# Csg 48.0# Csg 76.0# Csg Note: Grapples are stenciled with nominal catch size * Segmented grapples. All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Manual B215 Standard Releasing Spear Page 22
25 LOGAN RELEASING SPEAR GRAPPLE RANGE CHART LOGAN SPEAR GRAPPLE Logan Part No * F3032 F3032 F3032 F * * Bowen No LOGAN SPEAR GRAPPLE Logan Part No * F3034 F3034 F3034 F * * Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 11.5 ID 11-3/4 OD 11-3/4 OD 11-3/4 OD 11-3/4 OD 13-3/8 OD 13-3/8 OD 54.0 to 38.0 to 60.0# Csg 47.0 to ID 96.0#, # Csg 54.0# Csg 60.0# Csg Csg ID Csg LOGAN SPEAR GRAPPLE Logan Part No * * * * * * * Bowen No LOGAN SPEAR GRAPPLE Logan Part No * * * * * * * Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 13-3/8 OD 13-3/8 OD 12-3/4 OD 14 OD to 13-5/8 ID 16 OD 72.0 to 48.0 to 12-3/4 ID 42.0 to ID 55.0 to 85.0# Csg 68.0# Csg 57.0# Csg 75.0# Csg LOGAN SPEAR GRAPPLE Logan Part No * * * * Bowen No LOGAN SPEAR GRAPPLE Logan Part No * * * * Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 16 OD 17-1/2 ID 20 OD 18-5/8 OD 65.0 to 90.0 to 87.0# Csg 84.0# Csg 106.5# Csg Note: Grapples are stenciled with nominal catch size * Segmented grapples. All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Page 23 Standard Releasing Spear Manual B215
Airetool Condenser Expanders Selection Guide G-900 Series Heat Exchanger and Condenser Tube Expanders. Airetool Heat Exchanger Condenser Expanders
Airetool Heat Exchanger Condenser Expanders Step Rolling Step rolling is required when expanding tubes in thick tube sheets. Typically the first expansion is made at the innermost location, away from the
More informationHeat Exchanger Condenser Expanders
Heat Exchanger Condenser Expanders The world standard in tube expanders Airetool heat exchanger and condenser expanders have long been recognized as the standard to which all other brands are measured.
More informationClean packaging Class M3.5 Standard packaging Class M5.5. The U type is recommended when changing tubing sizes. Packaging
eries LQ Options Panel mounting nut LQ U Applicable fitting LQN P Applicable fitting LQ LQ Application For LQ For LQ insert bushing Clean packaging M. tandard packaging M. The U type is recommended when
More informationRaptor Series Adapters
Raptor Series Adapters 3-6 ADAPTER 6-10 ADAPTER For Air Powered Lug and Torque Chucks Adapter Sizes 3 5 3 6 3 6.75 3 150mm 3 7.415 3 8 6 8 6 10 6 12 TABLE OF CONTENTS Caution... 3 Tidland Customer Service...
More informationC-pan arm USERS INSTRUCTIONS
C-pan arm USERS INSTRUCTIONS Designed 1 of 12 and made in Denmark Thanks for purchasing a 9.Solutions product. With great passion, we design our products to be as versatile as possible. We hope that our
More informationDrilling Machine. Presenter: G. Tulloch
Drilling Machine Presenter: G. Tulloch Drilling machine A power operated machine tool which holds the drill in its spindle rotating at high speeds and when actuated move linearly against the work piece
More informationProduct Overview. Features
APCF1 Model Tripod Product Overview The Ravelli APCF1 is a Professional Quality Carbon Fiber Tripod providing a solid base for high-end photographic equipment. This model is a mix of carbon fiber and magnesium
More informationERGONOMIC MODULAR RAIL V3 M-LOK. ALG Defense 800 East Walnut Street North Wales, PA algdefense.com
TM ERGONOMIC MODULAR RAIL V3 M-LOK ALG Defense 800 East Walnut Street North Wales, PA19454 610.635.8937 algdefense.com TM ERGONOMIC MODULAR RAIL V3 M-LOK PACKAGE CONTENTS Ergonomic Modular Rail V3 with
More informationSAVE THESE INSTRUCTIONS
and Height Mounts Assembly, Installation and Operating Instructions Model Nos. QL, QLA, ARM250, QLM6 and QLAM6 NOTE: Check all parts for shipping damage. In case of shipping damage, DO NOT use. Contact
More informationIS-DM220/IR/HB IS-DM220
IS-DM220/IR/HB IS-DM220 Installation Guide Indoor/Outdoor Ver. 1.2 00P6NX223ZXSEA2 Table of Contents 1. Indoor Camera Installation... 3 1.1 Hard Ceiling... 3 1.2 In-Ceiling (T-Bar) Mounting... 13 1.3 4S
More informationSurvival Laser SL-005PB Laser Parts Bundle Assembly & Operation Instructions
Survival Laser SL-005PB Laser Parts Bundle Assembly & Operation Instructions WARNING: READ ALL INSTRUCTIONS AND THE ENCLOSED SAFETY PRECAUTIONS BEFORE ASSEMBLY AND USE Assemble and use these parts ONLY
More informationMounting Accessory Guide
Apr. 12 2010 Table of Contents Mounting Accessory Guide 1 Overview 5 Introduction... 5 Types of Mounting Methods... 5 Surface... 5 Wall... 5 L-Type Wall Mount (PMAX-0308) 6 Heavy Duty Wall Mounts (PMAX-0305
More informationSurvival Laser SL-002PB Laser Parts Bundle w/g-1 Lens Assembly & Operation Instructions
Survival Laser SL-002PB Laser Parts Bundle w/g-1 Lens Assembly & Operation Instructions WARNING: READ ALL INSTRUCTIONS AND THE ENCLOSED SAFETY PRECAUTIONS BEFORE ASSEMBLY AND USE Assemble and use these
More informationInstallation Guide Mounting Kit for Mounting Philips Avalon CTS Cordless Fetal Transducer System on Wall, 2'' Post, Rail, or Slide-on Mounting Plate
Installation Guide Mounting Kit for Mounting Philips Avalon CTS Cordless Fetal Transducer System on Wall, 2'' Post, Rail, or Slide-on Mounting Plate The purpose of this guide is to: 1. Describe mounting
More informationANCHORS EARTH HARDWARE POLELINE AERIAL DROP HARDWARE ATTACHMENTS DROP GROUNDING HARDWARE BANDING TOOLS ANCHORS WALL FASTENERS
EARTH ANCHORS POLELINE HARDWARE AERIAL DROP HARDWARE DROP ATTACHMENTS GROUNDING HARDWARE BANDING TOOLS WALL ANCHORS 2009-2010 FASTENERS EA1 Single Solid Square Hub Power Driven Anchor Installation is performed
More informationFeatures: Quality Testing and Documentation
1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice
More informationserial number A1159T or lower, which includes all manufactured in 2008 Not compatible and not required. Figure 1 Auger Update Sites Call-Outs R B
Installation Instructions 1 Auger Carrier Update ADC2350 Air Carts Used with: ADC2350B General Information These instructions explain how to install an Auger Carrier Update on a pre-2009 pull-behind air
More informationFurther Information can be found at
Below is a step by step guide to assembling the Hurricane-Rig. Remember that this is a precision optical instrument. Excessive force can bend critical parts. If treated well it should give many years of
More informationDescription: Detailed procedure on removing old bushing and installing new Brake Bushing Replacement Kit 10447
Procedure: BRAKE BUSHING REPLACEMENT PROCEDURE Product: Document #: Rev: Page: MODEL 7000, 7000A, & 8000 GYRO 078 1 1 of 14 Description: Detailed procedure on removing old bushing and installing new Brake
More informationG12/G12x USER S MANUAL
G12/G12x USER S MANUAL TABLE OF CONTENTS SECTION 1 SLIDE CONFIGURATION SECTION 2 SLIDE CONFIGURATION ACCESSORIES SECTION 3 TABLETOP CONFIGURATION SECTION 4 TABLETOP CONFIGURATION ACCESSORIES SECTION 5
More informationTroubleshooting: Installation 10. Troubleshooting: Door Jamming and Door Handing 11. Troubleshooting: Touchscreen 14. Troubleshooting: Battery 15
Programming and Troubleshooting Guide 1 2 3 4 5 6 Mastercode 2 Troubleshooting: Installation 10 Troubleshooting: Door Jamming and Door Handing 11 Troubleshooting: Touchscreen 14 Troubleshooting: Battery
More informationInstallation and User Guide
Installation and User Guide VADDIO DOMEVIEW HD INDOOR PENDANT MOUNT DOME ENCLOSURE FOR THE VADDIO HD-20, HD-19 AND HD-18 PTZ CAMERAS Part Number: 998-9100-200 2011 Vaddio - All Rights Reserved DomeVIEW
More informationInstallation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit
Installation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit The purpose of this guide is to: 1. Describe attachment of Table Top Mount to Mounting Adapter on Arm (page 2). 2.
More informationTable of Contents: TOPIC: Safe Operation: READ THIS FIRST Page: 3 Warranty 4 Specifications 4 Installation 5-7 Operating Instructions 8 Parts Diagram
INSTALLATION & OPERATIONS MANUAL FlexArm B-19 FlexArm Inc. Division of Midwest Specialties, Inc. 851 Industrial Drive Wapakoneta, Ohio 45895 419-738-8147 Book Part No 360740 12/2014 1 Table of Contents:
More informationML MLT-D104S TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
SAMSUNG ML-1660 1665 MLT-D104S TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS SAMSUNG MLT-D104S TONER CARTRIDGE REMANUFACTURING THE SAMSUNG ML-1660/1665 MLT-D104S TONER CARTRIDGE By Enrique Stura and the
More informationRemoval and Installation8
8 Screw Types 8-4 Top Cover Assembly 8-5 Left Hand Cover 8-6 Right Hand Cover 8-10 Front Panel Assembly 8-14 Left Rear Cover 8-15 Right Rear Cover 8-16 Extension Cover (60" Model only) 8-17 Media Lever
More informationASTRO UW-1C and RW-1C LABEL PRINTER UNWINDER & WINDER
ASTRO UW-1C and RW-1C LABEL PRINTER UNWINDER & WINDER OPERATOR MANUAL ASTRO MACHINE CORP. 630 Lively Blvd. Elk Grove Village, IL 60007 Phone: (847) 364-6363 Fax: (847) 364-9898 www.astromachine.com SAFETY
More informationHOW TO ORDER SWIVEL JOINTS
HOW TO ORDER SWIVEL JOINTS Emco Wheaton offers a wide variety of swivel joints to fit almost any application. In order to assist you in ordering the Correct swivel joint, we have developed a guideline
More informationOPERATING USER MANUAL for PRESSURE RECORDERS
Serial No. OPERATING USER MANUAL for PRESSURE RECORDERS MNW-004 Rev. E 03/21/16 Palmer Instruments Inc. 234 Old Weaverville Road Asheville, NC 28804 Toll Free: 800-421-2853 Phone: 828-658-3131 Fax: 828-658-0728
More informationCutter Option Installation Instructions
This kit includes the parts and documentation necessary to install the cutter option on the Zebra XiII, XiIII, and XiIIIPlus-Series printers. NOTE: The Cutter Option is not available for the 96XiIII. Adding
More informationWritten By: Walter Galan
imac Intel 21.5" EMC 2428 CPU Replacement Replace the CPU in your imac Intel 21.5" EMC 2428. Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 33 INTRODUCTION Use this guide to upgrade
More informationTABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION
S6 USER S MANUAL TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION SECTION 4 SLIDE CONFIGURATION ACCESSORIES SECTION 5 RACK MOUNT
More informationROVI EXPANDING COLLETS
ROVI EXPANDING COLLETS For 5C, 16C and 3J Spindles and Fixtures Diameters of.065" through 6" 800-423-5145 Expanding Collet Accessories Rovi Reworking Tools Plus Mini Collet Turning Ring Reworking Sleeve
More informationRemoving and Replacing Parts
Removing and Replacing Parts Preparing to Work Inside the Computer Recommended Tools Screw Identification System Components Hard Drive Fixed Optical Drive Media Bay Devices Memory Modules Mini PCI Card
More informationPROCEDURE FOR TENSILE TESTING OF REINFORCING BARS
1. PROCEDURE OVERVIEW This FSEL test standard is used to determine the tensile properties of reinforcing bars. The testing is in general conformance with ASTM A370-15 Standard Test Methods and Definition
More informationWCK Cleaning Pigs. Features
Sizes: 6- through 14-inch Bulletin No: 3000.002.03 Date: May 2010 Cross Indexing No: n/a Supersedes: 3000.002.02 (1/07) Options WCK3 Cleaning Pig WCK-12 and WCK-3 Pigs are available in sizes 6" (0 mm)
More informationMBE Mounts and Adapters
MBE Mounts and Adapters MBE Series en Installation Guide MBE Mounts and Adapters Table of Contents en 3 Table of Contents 1 Important safety instructions 4 2 MBE Series Mounts and Adapters 6 2.1 Unpacking
More informationUniversal Tristop Cylinder for Cam Brakes
Tristop for Cam Brakes 3rd Edition This publication is not subject to any update service. New versions are available in INFORM at www.wabco-auto.com Copyright WABCO 2006 Vehicle Control Systems An American
More information72 Heavy Duty Dual Trim Deck Parts Manual
2 Heavy Duty Dual Trim Deck Parts Manual Hustler Turf Equipment P.O. Box 000 Hesston, Kansas 02-209 02999 Rev 8/0 Table of Contents Chapter General Information.................................... - Chapter
More informationVacuum Maintenance Manual (EXCERPT Tim Benedict)
1. Position a ladder, scaffold, or work stand, on the right side of Vacuum Skid where the blower motors are installed. 2. Locate the six (6) vacuum hoses connecting the blower motors to the HEPA housings
More informationOperating Instructions Drill rigs DRU400 DRA400
Operating Instructions Drill rigs DRU400 DRA400 Index 001 Original operating instructions 10988838 en / 12.05.2017 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested
More informationDI-ACRO #24 HAND SHEAR INSTRUCTION MANUAL
DI-ACRO #24 HAND SHEAR INSTRUCTION MANUAL REV. G 6/12 1 TABLE OF CONTENTS A. SAFETY INFORMATION PG. 3 B. SET UP PROCEDURE PG. 3 C. MAINTENANCE PG. 3 D. TECHNICAL DATA PG. 3 E. OPERATING PROCEDURES PG.
More informationPreparation and Installation of the Composite Type Rupture Disc (Light Lip and Heavy Lip) in 30 Seat Insert, Full-Bolted, and Union Type Holder
GEP-7004 Rev. L 101251 Ref. ID: 5472 Preparation and Installation of the Composite Type Rupture Disc (Light Lip and Heavy Lip) in 30 Seat Insert, Full-Bolted, and Union Type Holder WARNING USER SHOULD
More informationEVOLVE1-M MONITOR ARM
EVOLVE1-M MONITOR ARM EVOLVE1-M Rev A 2/17 Model EVOLVE1-M-SLV Model EVOLVE1-M-BLK Model EVOLVE1-M-WHT ASSEMBLY AND ADJUSTMENT EVOLVE1-M MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before
More informationP F
12430 55 TH ST N OAK PARK HEIGHTS, MN 55082 P 651-342-1756 F 651-342-1293 INFO@DIACRO.COM Copyright 2014 REV. 9-MAY-2014 1 SAFETY INFORMATION PG. 3 SET-UP PROCEDURE PG. 3 MAINTENANCE PG. 3 TECHNICAL DATA
More informationSurvival Laser SL-VPB Laser Parts Bundle Assembly & Operation Instructions
Survival Laser SL-VPB Laser Parts Bundle Assembly & Operation Instructions WARNING: READ ALL INSTRUCTIONS AND THE ENCLOSED SAFETY PRECAUTIONS BEFORE ASSEMBLY AND USE Assemble and use these parts ONLY in
More informationDSLR NANO Camera Steadycam
DSLR NANO Camera Steadycam MF-DSLR-NANO-QR I N S T R U C T I O N M A N U A L Copyright Flyboyfilms NV. All rights Reserved Green Hill I Hoge Wei 16 I 1930 Zaventem I Belgium info@movofilms.be I www.movofilms.be
More informationimac Intel 21.5" EMC 2389 Stand Replacement
imac Intel 21.5" EMC 2389 Stand Replacement Replace a broken or cosmetically unappealing stand on the imac 2389 21.5 Written By: Aaron Cooke ifixit CC BY-NC-SA www.ifixit.com Page 1 of 30 INTRODUCTION
More informationTH ST N OAK PARK HEIGHTS, MN P F
12430 55 TH ST N OAK PARK HEIGHTS, MN 55082 P 651-342-1756 F 651-342-1293 INFO@DIACRO.COM SAFETY INFORMATION PG. 3 SET UP PROCEDURE PG. 3 MAINTENANCE PG. 3 TECHNICAL DATA PG. 3 OPERATING PROCEDURES PG.
More informationskyline 70 Fluid Head OPERATOR S MANUAL #1050 Skyline 70 Fluid Head
skyline 70 Fluid Head OPERATOR S MANUAL #1050 Skyline 70 Fluid Head Features and Controls Sliding Plate Lock Sliding Plate Pan Handle Clamp Tilt Lock Pan Handle Safety Lock Knob Pan Lock Threaded Stud
More informationZ-Truck (Vertical Moving) Z-truck Flag. Y-Truck (Horizontal Moving) FIGURE 1: VIEW OF THE Z-TRUCK. Flexshaft Assembly
Replacing the LCD Cable To remove and replace the LCD Cable you will need the following tools: #2 Phillips screwdriver (magnetic tip preferred) Socket wrench with 10mm socket Removing the Side Panel 1.
More informationMULTI-V FUL-GRIP SHEAVES AND BUSHINGS FUL-GRIP (QD) BUSHINGS FUL-GRIP (QD) SHEAVES STANDARD MULTI-V SHEAVES SPECIAL MADE-TO-ORDER SHEAVES
MULTI-V FUL-GRIP SHEAVES AND BUSHINGS FUL-GRIP (QD) BUSHINGS FUL-GRIP (QD) SHEAVES STANDARD MULTI-V SHEAVES SPECIAL MADE-TO-ORDER SHEAVES Industry puts Maurey sheaves on more drives every year simply because
More information* IMPORTANT * REGISTERING YOUR MACHINE
* IMPORTANT * REGISTERING YOUR MACHINE Thank you for your purchase of the Keyline 994 Laser. Before continuing with machine setup and use, please complete the following; COMPLETE PRODUCT REGISTRATION FORM
More informationFull HD Speed Dome IP Camera
Full HD Speed Dome IP Camera Installation Guide Indoor / Outdoor Ver. 1.6 Preface The information given in this manual was current when published. The company reserves the right to revise and improve its
More informationReplacing the SATA PCI Controller Card
Replacing the internal controller PCI card may be performed by a single administrator; no tools are necessary. Caution There are static-sensitive electronics inside the unit. Before you handle any parts,
More informationSurvival Laser SL-001.4PB Laser Parts Bundle Assembly & Operation Instructions
Survival Laser SL-001.4PB Laser Parts Bundle Assembly & Operation Instructions WARNING: READ ALL INSTRUCTIONS AND THE ENCLOSED SAFETY PRECAUTIONS BEFORE ASSEMBLY AND USE Assemble and use these parts ONLY
More information1 5 / 8" 7 /8" 2" 7 /8" 75. 3" 7 /8" 75 Polyurethane HI-TECH Delrin / /16 3/4
For use on wood furniture that can accept a 3 /8" diameter hole approximately 1 5 /8" deep. No.20 pressed steel adapter (Part #50011) with toothed base is supplied. size: 5 /16" diameter x 1 1 /2" long.
More informationContents. Previous View. Next Page. Vision. Maintenance Manual. Torque-Safe Tripods. Spares & Repairs. Camera Control Solutions
Maintenance Manual Vision Torque-Safe Tripods Spares & Repairs Vinten Camera Control Solutions VISION TORQUE-SAFE TRIPODS SPARES & REPAIRS PUBLICATION PART 3380-9 ISSUE 1 Copyright Vinten Broadcast Limited
More informationContents. Communications, Modular (excludes 17B, 17C, MK 21 and KMB BandMasks ) 1.1 Daily Maintenance. 1.2 Monthly Maintenance (or
Communications, Modular (excludes 17B, 17C, MK 21 and KMB BandMasks ) Daily Maintenance Communications, Modular (excludes 17B, 17C, MK 21 and KMB BandMasks ) Contents COM-1 COM-1 1.1 Daily Maintenance
More informationUS FUTABA. M 19 x 1.25 Ø 8. ESTABLISHED mm. Unlocked Locked LOCKS Door Thickness mm. 18.
ked 38.5 mm 9 M 19 x 1.5 ESTABLISHED 1983 18 mm 3 mm Ø 3.5 4 mm 46 6.7 mm.5 mm 4. mm 6.5 1 Ø 8.65 mm 31 mm 6 mm mm 18.4 mm 17.6 mm Ø Diam Cylind Unlocked 6.7 mm 3 mm 31 5 9 86.8 17 8.5 Locked 4 4 19.5
More informationM-2300-ZX Focus SVT Brake Conversion Kit INSTRUCTION SHEET
Please contact the Tech Hot Line for the most current instruction information (586) 468-1356!!! PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION!!! OVERVIEW: This kit is designed
More informationBPL SERIES INSTALLATION INSTRUCTIONS THIS SHEET CONTAINS IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
BPL SERIES INSTALLATION INSTRUCTIONS Important Warning THIS SHEET CONTAINS IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS. This product must be installed in accordance with National Electrical
More informationPrint Head Replacement and Adjustment Guide for the CD Printer Revision C
Print Head Replacement and Adjustment Guide for the CD Printer 110488-001 Revision C Rimage is the trademark of the Rimage Corporation. Perfect Image is a registered trademark of the Rimage Corporation.
More informationPeel/Rewind Upgrade Kit
Peel/Rewind Upgrade Kit Installation Instructions This kit includes the parts and documentation necessary to install the Peel/Rewind upgrade kit on the following printers: ZM400 ZM600 Read these instructions
More informationSADDLES & SNAP-ON SADDLES
SADDES & SAP-O SADDES When Assembling Spears Saddles to PVC pipe, Spears anufacturing Company recommends Spears PVC-19 Solvent Cement and Spears Primer-68/Primer-70 or equivalent. Although good connections
More informationC764i Integrated LCD Screen Option. Cardio Theater Integrated Bracket Assembly Instructions
C764i Integrated LCD Screen Option Cardio Theater Integrated Bracket Assembly Instructions Table of Contents 1 2 3 4 5 6 7 Before You Begin... 3 Obtaining Service... 3 Unpacking the Equipment... 3 Important
More informationZero Gravity Rig Operating Instructions
Welcome to our new top-of-the-line shoulder support system for cameras up to 15 lbs - the ZG Rig. In addition to its totally unique vertical balancing mechanism, this system is designed to be configurable
More informationTitan Media Cart. Installation and Operation Manual
Titan Media Cart Installation and Operation Manual Table of Contents INTRODUCTION SERVICE AND SUPPORT... 1 PRODUCT RETURNS... 1 UNPACKING... 1 TITAN SINGLE MEDIA CART... 2 TITAN DUAL MEDIA CART... 2 BEFORE
More informationDigital Overhead Stirrer
A Geno Technology, Inc. (USA) brand name Digital Overhead Stirrer Cat. No. BT1021 1-800-628-7730 1-314-991-6034 info@btlabsystems.com Thanks for choosing BT1021 Digital Overhead Stirrer. This operation
More informationipod Classic Headphone Jack & Hold Switch Replacement
ipod Classic Headphone Jack & Hold Switch Replacement Replace Headphone Jack & Hold Switch to fix no audio and/or no unlock Written By: irobot ifixit CC BY-NC-SA www.ifixit.com Page 1 of 22 INTRODUCTION
More informationApple 3.5 Drive External Floppy Drive
Apple 3.5 Drive External Floppy Drive Teardown This guide will show the disassembly down to the bare internal drive and other components of the Apple 3.5 Drive. Written By: rockinkat ifixit CC BY-NC-SA
More informationTools required: 1. 10mm combination wrench 2. 10mm socket, 6 + extension, and ratchet. 3. Torque Wrench ( in. lbs.) (11-18 ft. lbs.
This tutorial will show you how to replace your weak factory Relay Lever Driver (1J0-711-256) with an upgraded Grüvenparts Cable Transmission Short Shift Kit. This procedure will only take about 5 minutes
More informationipod Classic Battery Replacement Replace the battery on your ipod classic. Written By: irobot ifixit CC BY-NC-SA
ipod Classic Battery Replacement Replace the battery on your ipod classic. Written By: irobot ifixit CC BY-NC-SA www.ifixit.com Page 1 of 18 INTRODUCTION Battery not lasting long? Swap it out. TOOLS: 1.5"
More informationStealthyPro Instructions
StealthyPro Instructions 3-point Shooter Mode / Handheld Mode / Monopod Mode Place the black piece between the handle and the silver ring (as pictured). Stabilizer Mode In stabilizer mode, thread the handle
More informationAssembly instructions VOSS quick connect system 203 N
Assembly instructions VOSS quick connect system 203 N The optimized classic A. Important notices Please observe before using the quick connect system VOSS quick connect system 203 N is suitable for air
More information060-Hardware. Clamps and Brackets Hose Clamps
Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"
More informationLeapers, Inc. Proudly Presents UTG OPTICS DOT SIGHTS TOTAL SOLUTION TO YOUR NEEDS -COMMITMENT TO BEST QUALITY, BEST VALUE AND BEST SERVICE-
Leapers, Inc. Proudly Presents MUO006011104 UTG OPTICS magnifiers scopes DOT SIGHTS TOTAL SOLUTION TO YOUR NEEDS -COMMITMENT TO BEST QUALITY, BEST VALUE AND BEST SERVICE- www.leapers.com 32700 Capitol
More informationDell Inspiron XPS and Inspiron 9100 Service Manual
Dell Inspiron XPS and Inspiron 9100 Service Manual Dell Inspiron XPS and Inspiron 9100 Service Manual Before You Begin Memory Module, Mini PCI Card, and Devices System Components Subwoofer Bluetooth Card
More informationMCH WIRE HARNESS WITH QUICK DISCONNECT REPLACEMENT Initial Release 1/31/2013
1. Table of Contents 1. Table of Contents Page 1 2. Remove Failed MCH-103.2 Page 1 3. Install MCH-103.2 to MCH-102NW Page 2 4. Install NC3FX-HD to MCH-103.2 Page 3 5. Install MCH-103.2 Battery Terminal
More informationLIST NO. F409 ROTARY HAMMER. Model DH 28PD (E1) DH28PD 22% TU Rev.1
Model ROTARY HAMMER LIST F409 (E1) 2009 9 7 22% TU01658 DH28PD Rev.1 113 1 2 3 4 5 6 7 8 9 10 11 14 15 16 20 21 17 18 22 23 24 25 29 27 30 31 19 32 33 34 35 36 37 38 62 63 64 67 68 69 65 66 70 71 72 73
More informationDSLR Nano HD Camera Stabilizer (FLCM-DN-HD-QT)
DSLR Nano HD Camera Stabilizer (FLCM-DN-HD-QT) I NSTRUC TI ON MANUA L For Demonstration Only All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted
More informationSeries Amp Quick Connect Input and Output Power Panels
Series 300 1200-1600 Amp Quick Connect Input and Output Power Panels DANGER is used in this manual to warn of a hazard situation which, if not avoided, will result in death or serious injury. WARNING is
More informationSMART FORCE AND TORQUE SENSORS. User s Guide
SMART FORCE AND TORQUE SENSORS Thank you Thank you for purchasing a Mark-10 Plug & Test TM remote sensor, designed for use with Mark-10 models 7i, 5i and 3i force/torque indicators. With proper usage,
More informationUser manual & Installation guide free flex. free. viveroo GmbH Wewelsburger Straße Salzkotten Germany
User manual & Installation guide free flex free viveroo GmbH Wewelsburger Straße 4 33154 Salzkotten Germany www.viveroo.com REV20180924 Safety information! Warning Please read the assembly instructions
More informationInstalling the NEMA 4X Hatch
Installing the NEMA 4X Hatch ET 350 Monitor (Models ET 350R and ET 350L3) and ET 3170 Terminal Intended Use When properly installed using the materials provided, and according to these instructions, the
More informationSeries Amp Pad Mount Quick Connect Input and Output Power Panels
Series 300 2000-4000 Amp Pad Mount Quick Connect Input and Output Power Panels DANGER is used in this manual to warn of a hazard situation which, if not avoided, will result in death or serious injury.
More informationDSLR Camera Cage Shoulder Rig Kit (FC-03)
FILMCITY DSLR Camera Cage Shoulder Rig Kit 1 DSLR Camera Cage Shoulder Rig Kit (FC-03) I N S T R U C T I O N M A N U A L All rights reserved. No part of this document may be reproduced, stored in a retrieval
More informationA-dec 570L Dental Light on a DCS System INSTALLATION GUIDE
A-dec 570L Dental Light on a DCS System INSTALLATION GUIDE C ONTENTS Choose an Installation Guide...... Before You Begin.............. 3 Disconnect the Light Cable........ 3 Cut the Light Cable............
More informationContents. Next Page. Previous View HDT. Heavy-Duty Tripod Range. Vinten Camera Control Solutions
HDT Heavy-Duty Tripod Range Vinten Camera Control Solutions HDT HEAVY-DUTY TRIPODS SPARES & REPAIRS PUBLICATION PART No. 390-9 ISSUE Copyright Vinten Broadcast Limited 004 All rights reserved throughout
More informationASSEMBLY INSTRUCTIONS. 8 Element 10/11 Meter Maximum Beam M108C
ASSEMBLY INSTRUCTIONS 8 Element 10/11 Meter Maximum Beam M108C www.macoantennas.net (815) 244-3500 Maco Antennas a Division of Charles Electronics, LLC 302 S. East St. Mount Carroll, IL 61053 Copyright
More informationMounting on the Ceiling Using Flush Mount (Face Down)
Mounting on the Ceiling Using Flush Mount (Face Down) Installation Guide 2014/02/14 Table of Contents Safety Information... 3 Installation Procedures... 5 Step 1: Drill a Hole on the Ceiling... 5 Step
More informationPRO. GPI PRO Systems Inc Anza Drive Unit B Valencia, CA (661) Fax (661) OWNER S MANUAL
PRO OWNER S MANUAL GPI PRO Systems Inc 25026 Anza Drive Unit B Valencia, CA 91355 (661)257-5771 Fax (661)257-5775 1 TABLE OF CONTENTS 2012 PAGE 4 PAGE 7 PAGE 8 PAGE 9 PAGE 11 PAGE 12 PAGE 14 PAGE 16 PAGE
More information1.8 METER SERIES 1194 ANTENNA SYSTEM
April 20, 2016 REVISION J ASSEMBLY MANUAL 1.8 METER SERIES 1194 ANTENNA SYSTEM General Dynamics SATCOM Technologies 1700 Cable Drive NE Conover NC 28613 USA Phone 770-689-2040 www.gdsatcom.com 1.8 METER
More informationPremium Drillpipe. for Optimal Performance
Premium Drillpipe for Optimal Performance DRILCO offers a full line of premium drillpipe available in a variety of sizes with API and non-standard wall thickness to deliver optimal torque, weight, and
More informationSnap Server 4400 Power Supply
Snap Server 4400 Power Supply Snap Server 4400 Note You can set up your system to send an e-mail alert in the event of a hardware failure. For details, see the section on e-mail notification in your Administrator
More informationFortiCam SD20 Mounting Guide
FortiCam SD20 Mounting Guide FortiCam SD20 Mounting Guide April 14, 2016 Copyright 2016 Fortinet, Inc. All rights reserved. Fortinet, FortiGate, FortiCare and FortiGuard, and certain other marks are registered
More informationOPTRON mobile. User Guide. magnified vision. Vers. 2.1AL Magnified Vision, Inc. 2013
OPTRON mobile User Guide Vers. 2.1AL Magnified Vision, Inc. 2013 magnified vision 2 Before operating this device, please read this user guide thoroughly and retain it for future reference. For questions,
More informationHeavy-Duty Tripod Range
Heavy-Duty Tripod Range Vinten Camera Control Solutions Heavy-Duty Tripod Range SPARES & REPAIRS PUBLICATION PART 3366-9 ISSUE 1 Copyright Vinten Broadcast Limited 2000 All rights reserved throughout the
More informationPowerFlex 755 Transition Section and Splicing Kit for Floormount Drives and CENTERLINE 2100 Motor Control Centers
Installation Instructions PowerFlex 755 Transition Section and Splicing Kit for Floormount Drives and CENTERLINE 2100 Motor Control Centers Topic Page Introduction, Compatibility 1 Additional Resources
More informationThanks for shopping with Improvements! Lighted Canterbury Christmas Greenery Doorway Arch Item #548443
Thanks for shopping with Improvements! Lighted Canterbury Christmas Greenery Doorway Arch Item #548443 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. PARTS LIST: 2 Metal Plate Stands 5 Greenery
More information