T2GPX XMC. Installation Manual. User Manual. Graphics Card

Transcription

1 Installation Manual User Manual T2GPX XMC Graphics Card XMC Module 3D Graphics card/ AMD/ATI Radeon E4690 Discrete GPU based embedded graphics XMC Module

2 T2GPX T2GPX XMC XMC Graphics Graphics Card Card T2GPX T2GPX XMC XMC Graphics Graphics Card Card T2GPX T2GPX XMC XMC Graphics Graphics Card Card T2GPX T2GPX XMC XMC Graphics Graphics Card Card T2GPX T2GPX XMC XMC Graphics Graphics Card Card T2GPX T2GPX XMC XMC Graphics Graphics Card Card T2GPX T2GPX XMC XMC Graphics Graphics Card Card T2GPX T2GPX XMC XMC Graphics Graphics Card Card AMD/ATI Radeon E4690 Discrete GPU based Embedded Graphics XMC Module AMD/ATI Radeon E4690 Discrete GPU based Embedded Graphics XMC Module AMD/ATI Radeon E4690 Discrete GPU based Embedded Graphics XMC Module AMD/ATI Radeon E4690 Discrete GPU based Embedded Graphics XMC Module AMD/ATI Radeon E4690 Discrete GPU based Embedded Graphics XMC Module AMD/ATI Radeon E4690 Discrete GPU based Embedded Graphics XMC Module AMD/ATI Radeon E4690 Discrete GPU based Embedded Graphics XMC Module AMD/ATI Radeon E4690 Discrete GPU based Embedded Graphics XMC Module

3 T2GPX XMC Graphics Card Installation Manual Version 1.0 June 20 1 Americas and Pacific Rim Bayside Parkway Fremont, CA Phone (510) Fax (510) Rest of World 5 Rue Irene Joliot-Curie Eybens, France Phone Fax

4 Copyright 2011, Inc. ALL RIGHTS RESERVED. No part of this publication may be reproduced in any form, by photocopy, microfilm, retrieval system, or by any other means now known or hereafter invented without the prior written permission of. The information in this publication has been carefully checked and is believed to be accurate. However, assumes no responsibility for inaccuracies. retains the right to make changes to this publication at any time without prior notice. does not assume any liability arising from the application or use of this publication or the product(s) described herein. RESTRICTED RIGHTS LEGEND: Use, duplication, or disclosure by the United States Government is subject to the restrictions set forth in DFARS (c)(1)(ii) and FAR TRADEMARKS THEMIS is a registered trademark of, Inc. AMD and ATI are registered trademarks of Advanced Micro Devices, Inc. Avivo and Radeon are trademarks of Advanced Micro Devices, Inc. VESA and DisplayPort are registered trademarks of Video Electronics Standards Association. All other trademarks or registered trademarks used in this publication are the property of their respective owners. Safety Precautions Instructions regarding safety precautions during installation, operation, or maintenance of the equipment are given in the section entitled Safety Instructions on page iv. WARNINGS and CAUTIONS The definitions of WARNINGS and CAUTIONS as used in this document are given in the Preface in the section entitled Notes, Cautions, Warnings, and Sidebars. Themis Customer Support North America, South America, and Pacific Rim Telephone: Fax: support@themis.com Web Site: T2GPX XMC Graphics Card Installation Manual, Version 1.0 June 2011 Part Number:

5 T2GPX XMC Graphics Card Installation Manual Version Revision History Version June 2011 iii

6 T2GPX XMC Graphics Card Installation Manual Version 1.0 Safety Instructions To maximize user safety and ensure correct device operation, all instructions contained in this section should be read carefully. Caution: It is important that the user observe all warnings and instructions that are on the device and contained in this manual. The device must be used in accordance with the instructions for use. Electrical installations in the room must correspond to the requirements of respective regulations. Take care that there are no cables, particularly mains cables, in areas where persons can trip over them. Do not use a mains connection in sockets shared by a number of other power consumers. Do not use an extension cable. Only use the mains cable supplied. The unit is completely disconnected from the power source only when the power cord is disconnected from the power source. Therefore the power cord and its connectors must always remain easily accessible. Do not set up the device in the proximity of heat sources or in a damp location. Make sure the device has adequate ventilation. All connection cables must be screwed or locked to the chassis housing. The device is no longer safe to operate when the device has visible damage or the device no longer functions. In these cases, the device must be shut down and secured against unintentional operation. Repairs may only be carried out by a person authorized by. The device may only be opened for the installation and removal of extension (PCI) cards, memory modules, storage drives, fan housings, power supplies, and the lithium battery all in accordance with the instructions given in this and correlating manuals. iv

7 T2GPX XMC Graphics Card Installation Manual If extensions are made to the device, the legal stipulations and the device specifications must be observed. The device must be switched off when removing the top cover; for example, before installing extension (PCI) cards. Electrostatic Discharge (ESD) A sudden discharge of electrostatic electricity can destroy static-sensitive devices or micro-circuitry. Proper packaging and grounding techniques are necessary precautions to prevent damage. Always take the following precautions: 1. Transport boards in static-safe containers such as boxes or bags. 2. Keep electrostatic-sensitive parts in their containers until they arrive at staticfree stations. 3. Always be properly grounded when touching a sensitive board, component, or assembly. 4. Store electrostatic-sensitive boards in protective packaging or on conductive foam. Grounding Methods Guard against electrostatic damage at workstations by following these steps: 1. Cover workstations with approved anti-static material. Provide a wrist strap connected to a work surface and properly grounded tools and equipment. 2. Use anti-static mats, heel straps, or air ionizers to give added protection. 3. Handle electrostatic-sensitive components, boards, and assemblies by the case or the PCB edge. 4. Avoid contact with pins, leads, or circuitry. 5. Turn off power and input signals before inserting and removing connectors or test equipment. 6. Keep the work area free of non-conductive materials such as ordinary plastic assembly aids and Styrofoam. 7. Use field service tools, such as cutters, screwdrivers, and vacuums that are conductive. v

8 T2GPX XMC Graphics Card Installation Manual Version Always place drives and boards PCB-assembly-side down on the foam. vi

9 Table of Contents Safety Instructions... iv Preface... xvii 1. T2GPX Overview and Specifications Main Features Display and Video Features T2GPX Display Features Graphics Acceleration DirectX Anti-Aliasing Filtering Anisotropic Filtering High Efficiency Memory Controller Video Display Ports DisplayPort DVI Technical Support Hardware and Software Installation Hardware Installation A. Connector Pinouts and LEDs... A-1 A.1 I/O Port Specifications... A-1 A.2 DisplayPort Digital Display Interface... A-2 A.3 DVI-I Digital/Analog Video Port... A-3 A.4 XMC Connector... A-4 A.5 Front-Panel LEDs... A-7 Appendix B. Solder Beads...B-1 B.1 Factory-Configurable Solder Beads...B-1 B.1.1 T2GPX XMC Graphics Card Solder Beads...B-1 v

10 T2GPX XMC Graphics Card Installation Guide Version 1.0 Index... Index-1 Reader Comment Card vi

11 Table of Contents List of Figures Figure 1 T2GPX XMC Graphics Card (Heat Sink Installed)... xvii Figure 2 Three-Quarter Front View of the XV1,XV2,LV1... xviii Figure 3 Three-Quarter Front View of the T2GPX... xix Figure 4 Front View of the T2GPX... xix Figure 1-1 T2GPX XMC Graphics Card (Heat Sink Removed) Figure 1-2 T2GPX XMC Graphics Card Block Diagram Figure 1-3 ATI Radeon E4690 Graphics Processor Figure 1-4 T2GPX Front I/O Ports Figure 2-1 Host System Board for the T2GPX Figure 2-2 T2GPX XMC Graphics Card Figure A-1 T2GPX XMC Graphics Card I/O Ports... A-1 Figure A-2 T2GPX DisplayPort 1.1a Connector Pinout... A-2 Figure A-3 T2GPX DVI-I Connector Pinout... A-3 Figure A-4 T2GPX XMC Connector Pinout... A-4 Figure A-5 T2GPX Front-Panel LEDs... A-7 Figure B-1 T2GPX XMC Graphics Card Solder-Bead Locations (Bottom Side)... B-4 List of Tables Table 1-1 DisplayPort Maximum Pixel Rate Per 2.7-GHz Link Rate Table 1-2 DVI-I Example Dual Link Display Modes Table A-1 T2GPX DisplayPort 1.1a Signal Descriptions... A-2 Table A-2 T2GPX DVI-I Signal Descriptions... A-3 Table A-3 T2GPX XMC Signal Descriptions... A-5 Table A-4 T2GPX Front-Panel LED Behavior... A-7 Table B-1 T2GPX XMC Graphics Card Solder-Bead Settings (Bottom Side)... B-2 vii

12 T2GPX XMC Graphics Card Installation Guide Version 1.0 viii

13 Preface This document, entitled T2GPX XMC Graphics Card Installation Guide, provides a hardware overview of the Themis T2GPX XMC Graphics Card (see Figure 1 below), which is based on the ATI Radeon E4690 Embedded Graphics Processor (located under heat sink). T2GPX XMC Graphics Card is supported by XMC based platforms such as: Themis XV2 6RU VME64 Platform single board computer Themis XV1 6RU VME64 Platform single board computer Themis LV1 6RU VME64 Platform single board computer (Each product mentioned above can be found in the following figure: XV1;XV2;LV1, Figure 2 on page xviii).. Figure 1. T2GPX XMC Graphics Card (Heat Sink Installed) xvii

14 T2GPX XMC Graphics Card Installation Manual Version 1.0 Figure 2. Three-Quarter Front View of the XV1, XV2, LV1 xviii

15 Preface T2GPX XMC Graphics Card has been designed to fit on to a standard XMC carrier board and is provided with heat sink and installation hardware (not shown). The T2GPX is rugged enough to meet the demands associated with such markets as the military, aerospace, and telecommunications industries. Figure 3. Three-Quarter Front View of the T2GPX Figure 4. Front View of the T2GPX xix

16 T2GPX XMC Graphics Card Installation Manual Version 1.0 The T2GPX is based upon a x8 PCI-E gen 2.0 interface through the XMC (male) connector on the card. The XMC connector also allows for automatic switching between +12V and +5V VPWR. The XMC connection is fully Vita 42.3 XMC PCI-E protocol compliant. T2GPX XMC Graphics Card is based on the functionality and capability of the following AMD chipset: ATI Radeon E4690 Graphics Processor 128-bit memory interface and 512 MB GDDR3 An overview of T2GPX XMC Graphics Card design and specifications is given in Chapter 1, "T2GPX Overview and Specifications", of this manual. Connector pinout, LED, and solder bead descriptions is given in the Appendices of this manual. This manual is intended for an experienced system administrator with a knowledge of networking, VME based platforms, high-speed single board computers, and current OS software. Website Information corporate and product information may be accessed on the World Wide Web by browsing the website Your Comments are Welcome We are interested in improving our documentation and welcome your comments and suggestions. You can your comments to us at docfeedback@themis.com. Please include the document part number ( ) in the subject line of your . xx

17 Preface Notes, Cautions, Warnings, and Sidebars The following icons and formatted text are included in this document for the reasons described: Note: A note provides additional information concerning the procedure or action being described. Caution: A caution describes a procedure or action that may result in damage to the equipment. This may involve but is not restricted to heavy equipment or sharp objects. To reduce the risk, follow the instructions accompanying this symbol. Warning: A warning describes a procedure or action that may cause injury or death to the operator as a result of hazardous voltages. To reduce the risk, follow the instructions accompanying this symbol. Sidebar: A sidebar adds detail to the section within which it is placed, but is not absolutely vital to the description or procedure of the section. xxi

18 T2GPX XMC Graphics Card Installation Manual Version 1.0 xxii

19 Introductory Section Chapter 1 T2GPX Overview and Specifications The Themis T2GPX XMC Graphics Card (see Figure 1-1) is a high-resolution 3D graphics solution that is installed and runs on XMC-based system platforms such as the Themis XV2 single-board computer. The T2GPX has automatic switching between +12V and +5V VPWR input from the XMC connector. Figure 1-1. T2GPX XMC Graphics Card (Heat Sink Removed) 1-1

20 T2GPX XMC Graphics Card Installation Guide Version 1.0 Included below is a block diagram of the Themis T2GPX XMC Graphics Card. Dual Link (digital) DisplayPort DVI-I DAC (analog) DisplayPort Version 1.1a SPI M25P10 AMD ATI Radeon E4690 Embedded Graphics Processor PCI-E x8 gen 2.0 I2C P15 XMC Connector On Board DC/DC Thermal Sensor I2C FRU Figure 1-2. T2GPX XMC Graphics Card Block Diagram 1-2

21 1 T2GPX Overview and Specifications 1.1 Main Features The T2GPX XMC Graphics Card offers the following features: x8 PCI-E gen 2.0 link through the XMC connector +12V and +5V VPWR power switching from the XMC Full 30-bit Display Pipeline 320 shader processors Triple 10 bit DAC DirectX 10.1 OpenGL 3.X 128-bit memory interface 512 MB GDDR3 on chip memory Vita 42.3 XMC PCI Express Protocol Compliant Dual-monitor support DisplayPort v1.1a and DVI-I connector ports for a wide range of monitors (see Figure 1-4 on page 1-6) Video Decode 3D Graphics Supports: Windows XP, Windows Vista, Windows 7, and Linux (x86) 1.2 Display and Video Features T2GPX XMC Graphics Card s embedded ATI Radeon E4690 Graphics Processor (Figure 1-3, page 1-4) utilizes the Avivo Display System supporting VGA, VESA super VGA, and accelerator mode graphics display on two independent display controllers. The Avivo Display system was designed to lessen the strain placed on a CPU by allowing available GPU(s) to handle video decoding, encoding, and image post-processing. 1-3

22 T2GPX XMC Graphics Card Installation Guide Version 1.0 Figure 1-3. ATI Radeon E4690 Graphics Processor The T2GPX screen resolution is only limited to the capability of the monitor it is connected to, up to a maximum screen resolution of 3840x2400 per display output. Note: Not all resolutions are supported by all monitors. Maximum screen resolution is achievable as long as available memory and interface bandwidth are not oversubscribed, and is supported by the monitor. Please refer to the manufacturers documentation regarding your monitors resolution capabilities T2GPX Display Features The T2GPX XMC Graphics Card hosts a number of display features including: Dual independent display controllers that support true 30-bpp (bits per pixel i.e., color depth) throughout the display pipe. Advanced video capabilities, including high fidelity gamma, color correction and scaling. Adaptive per-pixel de-interlacing and frame rate conversion (temporal filtering). Enhanced dithering algorithm for LCD panels. Full RMX for sources up to 2560 pixels/line. YPrPb component output for direct drive of HDTV displays. T2GPX supports all region CGMSA/WSS (including CEA-A type B packets) on NTSC/PAL/SECAM. 1-4

23 1 T2GPX Overview and Specifications Graphics Acceleration Display and Video Features The T2GPX XMC Graphics Card boasts a full graphics acceleration feature set allowing for Desktop-level performance in the small form factor offered by the T2GPX. 3D resources are virtualized to a 36-b addressing space, for support of large numbers of render targets and textures. Up to 8k x 8k textures, including 128-b/pixel texture are supported DirectX 10.1 The T2GPX is fully DirectX 10.1 compliant, with 32-bit and 64-bit floating point processing per component and Shader Model 4.0 geometry and pixel support. Further capabilities include 16-bit and 32-bit floating point components for high dynamic range computations. Full anti-aliasing on render surfaces up to 128-bit floating point formats Anti-Aliasing Filtering Anti-aliasing filtering is available in 2x, 4x, and 8x modes, running a multi-sample algorithm with gamma correction, programmable sample patterns, and centroid sampling. The anti-aliasing filtering also supports: temporal anti-aliasing, adaptive antialiasing, and lossless color compression (up to 8:1) at all resolutions including wide screen HDTV Anisotropic Filtering Anisotropic filtering is available in 2x, 4x, 8x, and 16x modes, allowing up to 128- tap texture filtering. The anisotropic filtering uses Advanced Texture Compression (3Dc+ ).High quality 4:1 compression is available for normal maps and luminance maps High Efficiency Memory Controller The memory controller has a programmable arbitration logic which maximizes memory efficiency. Other features include: Fully Associative texture, color, and Z cache design. Hierarchical Z & Stencil buffers with Early Z Test. Lossless Z-buffer compression for both Z and Stencil. Fast Z-buffer Clear. Z cache optimized for real-time shadow rendering. Z and color compression resources virtualized to a 32-bit addressing space, for support of multiple render targets and textures simultaneously. 1-5

24 T2GPX XMC Graphics Card Installation Guide Version Video Display Ports The T2GPX XMC Graphics Card DisplayPort v1.1a only supports digital video formats. The DVI-I video port supports both analog (DVI-A) and digital (DVI-D Dual Link) video formats (see Figure 1-4 below). Although the DVI-I port supports both analog and digital video formats, they cannot be used simultaneously from the individual DVI-I port. The DVI-I connection will detect and choose the analog or digital portion of the interface depending on the monitor connected to it. For a detailed description of the LEDs and behaviors please see Table A-4 on page A-7. DisplayPort DVI-I A (Green LED) B (Yellow LED) Figure 1-4. T2GPX Front I/O Ports DisplayPort The T2GPX XMC Graphics Card utilizes a DisplayPort connection for a digital audio and video interface. The DisplayPort on the T2GPX follows the v1.1a standard specifications. Other features of the DisplayPort on the T2GPX include: 30-bpp (bits per pixel i.e., color depth) YCbCr 444 up to 30 bpp and 422 up to 20 bpp support Supports all video modes supported by the display controller as long as available memory and interface bandwidth are not oversubscribed 1-6

25 1 T2GPX Overview and Specifications Video Display Ports Link bandwidth (4 2.7-GHz link rate) allows pixel clocks of up to 359 MPixels/sec for 24 bpp or 287 MPixels/sec for 30 bpp Support for 24 bpp, 2560x1600@60Hz Some examples of optimal link rate per lane (2.7-GHz) transfer rates can be seen in Table 1-1 below. Table 1-1. DisplayPort Maximum Pixel Rate Per 2.7-GHz Link Rate Lanes 18 bpp 24 bpp 30 bpp 1 lane 119 MPixels/sec 89 MPixels/sec 71 MPixels/sec 2 lane 239 MPixels/sec 179 MPixels/sec 143 MPixels/sec 4 lane 359 MPixels/sec 359 MPixels/sec 287 MPixels/sec DVI For information regarding the DisplayPort connector pins and signal descriptions please see Figure A-2 on page A-2, and Table A-1 on page A-2. A DVI-I connector is used on the T2GPX XMC Graphics Card as an option which allows the user to connect with an analog, or digital signal. The Digital component of the DVI-I connection features dual link signals which provide for a second data link. The analog connections provides for red, green, blue, and horizontal sync signals. Other features of the DVI-I port include: 10-bit HDR output Support for industry standard CEA-861B video modes including 480p, 720p, 1080i, and 1080p. 162 MPixels/sec per link (for 30 bpp dual-link, double for 24 bpp dual-link) Fully compliant with the DVI electrical specification Compatibility with HDMI connections via DVI to HDMI cable adapter For some examples of display modes capable through the DVI-I dual link connection please see Table 1-2, page

26 T2GPX XMC Graphics Card Installation Guide Version 1.0 Table 1-2. DVI-I Example Dual Link Display Modes Graphics Array Pixel Width Pixel Height Refresh Rate Aspect Ratio QXGA 2,048 1, Hz 4:3 HDTV 1,920 1,080 85Hz 16:9 WUXGA 1,920 1, Hz 16:10 WQXGA 2,560 1,600 60Hz 16:10 WQUXGA 3,840 2,400 33Hz 16:10 For information regarding the DVI-I connector pin and signal descriptions please see Figure A-3 on page A-3, and Table A-2 on page A Technical Support For assistance and other information not found in this document concerning the T2GPX XMC Graphics Card or any other Themis product, please call Themis Customer Support in Fremont, CA, USA, at (510) , or For all inquiries by phone, Themis operational hours are: 8:00am 5:00pm Pacific Standard Time. 1-8

27 Installation Section Chapter 2 Hardware and Software Installation 2.1 Hardware Installation The T2GPX XMC Graphics Card can be installed within any product that supports XMC module-card protocol, such as Themis XV2 single-board VME-based computer system. To install thet2gpx XMC Graphics Card, follow these steps: 1. Remove the blank PMC/XMC faceplate or existing card from the XMC module slot on the host system board (see Figure 2-1 on page 2-2). 2. Insert the T2GPX into the XMC-card opening with the proper orientation and align the XMC connector with the mating connector on the host board. 3. Press the XMC connector into the mating host-pcb connector until the T2GPX is firmly seated. 4. To secure the T2GPX to the host PCB, use two threaded standoffs on the T2GPX (see Figure 2-2, page 2-2) and attach to the two mounting holes (see Figure 2-1) on the host PCB with two M2.5x5mm panhead screws. Attach the two threaded standoffs to the host PCB with the two screws. Important: If your T2GPX card is being installed into a system that has standoffs already attached to the host PCB, the T2GPX standoffs should be removed. All necessary hardware will be provided with the order. 2-1

28 T2GPX XMC Graphics Card Installation Guide Version 1.0 Remove Blank PMC/XMC Faceplate(s) Holes for standoffs XMC connectors (without standoffs installed) Holes for standoffs Figure 2-1. Host System Board for the T2GPX Holes for standoffs XMC connector (without standoffs installed) Figure 2-2. T2GPX XMC Graphics Card 2-2

29 A Appendix Connector Pinouts and LEDs This appendix provides the I/O port specifications for the T2GPX XMC Graphics Card. A.1 I/O Port Specifications T2GPX external I/O ports, DVI-I and DisplayPort v1.1a (see Figure A-1), are accessible through the I/O connectors on the T2GPX bezel panel (faceplate). DisplayPort v1.1a DVI I port Figure A-1. T2GPX XMC Graphics Card I/O Ports Both DVI-I and DisplayPort v1.1a video ports are described in the following sections of this appendix, along with LED behaviors. A drawing of the I/O port is provided to display physical pin locations followed by a table describing signal definitions. A-1

30 T2GPX XMC Graphics Card Installation Manual Version 1.0 A.2 DisplayPort Digital Display Interface Connector Type: 2-row, 20-pin connector (Male) digital display interface Manufacturer; Part: Molex; T2GPX XMC Graphics Card DisplayPort connector pinout and signal descriptions are shown in Figure A-2 and Table A-1. The digital display port is a DisplayPort 1.1a 20-pin connector that connects to the workstation monitor. The DisplayPort audio/video connector supports High Definition monitors of different manufacturers and various screen resolutions. The DisplayPort supports the v1.1a standard. Standard DisplayPort signal does not support DVI or HDMI. Symbol Pin 19 Pin 1 Card Front Edge Pin 20 Pin 2 Figure A-2. T2GPX DisplayPort 1.1a Connector Pinout Table A-1. T2GPX DisplayPort 1.1a Signal Descriptions Pin Number Signal Pin Number Signal 1 ML_Lane 0 (positive) 11 Ground 2 Ground 12 ML_Lane 3 (negative) 3 ML_Lane 0 (negative) 13 Pin_13 4 ML_Lane 1 (positive) 14 Pin_14 5 Ground 15 6 ML_Lane 1 (negative) 16 Ground 7 ML_Lane 2 (positive) 17 Auxiliary Channel (positive) Auxiliary Channel (negative) 8 Ground 18 Hot Plug Detect 9 ML_Lane 2 (negative) 19 Return for power 10 ML_Lane 3 (positive) 20 DisplayPort power (3.3V) A-2

31 A Connector Pinouts and LEDs A.3 DVI-I Digital/Analog Video Port Connector Type: 3-row, 24-pin, plus 5-pin (adjacent to 3-row) connector (female) DVI-I (digital/analog) interface Manufacturer; Part: Molex; T2GPX XMC Graphics Card DVI-I connector pinout and signal descriptions are shown in Figure A-3 and Table A-2. The DVI-I Integrated (digital/analog) video output port is a 29-pin connector for a supported digital, or analog workstation monitor. The DVI-I Integrated video port supports both analog and digital signals, although both signals will not be transmitted simultaneously. The DVI standard does not support audio signals. Symbol #4 40 UNC Thread Pin 1 Pin 8 Pin C2 Pin C5 Card Front Edge Pin 17 Pin 24 Pin C4 Figure A-3. T2GPX DVI-I Connector Pinout Table A-2. T2GPX DVI-I Signal Descriptions Pin Number Signal Pin Number Signal 1 TMDS Data2 (negative) 16 Hot Plug Detect 2 TMDS Data2 (positive) 17 TMDS Data0 (negative) 3 TMDS Data2/4 Shield 18 TMDS Data0 (positive) 4 TMDS Data4 (negative) 19 TMDS Data0/5 Shield 5 TMDS Data4 (positive) 20 TMDS Data5 (negative) 6 DDC clock [SCL] 21 TMDS Data5 (positive) 7 DDC data [SDA] 22 TMDS Clock Shield A-3

32 T2GPX XMC Graphics Card Installation Manual Version 1.0 Table A-2. T2GPX DVI-I Signal Descriptions (Continued) Pin Number Signal Pin Number Signal 8 Analog VSYNC 23 TMDS Clock (positive) 9 TMDS Data1 (negative) 24 TMDS Clock (negative) 10 TMDS Data1 (positive) C1 Analog Red 11 TMDS Data1/3 Shield C2 Analog Green 12 TMDS Data3 (negative) C3 Analog Blue 13 TMDS Data3 (positive) C4 Analog HSYNC 14 +5V Power C5 Analog GND 15 Ground for +5V A.4 XMC Connector Connector Type: 6-row x 19-pins, 114-pin (male) module connector Manufacturer; Part: Samtec; ASP The (male) XMC connection on the T2GPX XMC Graphics Card allows it to be connected to any available XMC carrier slot on a SBC (Single Board Computer). The T2GPX supports a x8 PCI-E gen 2.0 link through its XMC connector. Pin A1 Pin A19 Note: Column 1 starts on edge with larger key opening Pin F1 Pin F19 Figure A-4. T2GPX XMC Connector Pinout A-4

33 A Connector Pinouts and LEDs XMC Connector XMC connector pin signals on the T2GPX are described in Table A-3. Table A-3. T2GPX XMC Signal Descriptions Pin Signal Pin Signal Pin Signal A1 PCIe_XMC_TX0P B1 PCIe_XMC_TX0N C1 V_3V3 A2 GND B2 GND C2 XMC_TRST_L A3 PCIe_XMC_TX2P B3 PCIe_XMC_TX2N C3 V_3V3 A4 GND B4 GND C4 XMC_TCK A5 PCIe_XMC_TX4P B5 PCIe_XMC_TX4N C5 V_3V3 A6 GND B6 GND C6 XMC_TMS A7 PCIe_XMC_TX6P B7 PCIe_XMC_TX6N C7 V_3V3 A8 GND B8 GND C8 XMC_TDI A9 No Connection B9 No Connection C9 No Connection A10 GND B10 GND C10 XMC_TDO A11 PCIe_XMC_RX0P B11 PCIe_XMC_RX0N C11 MBIST# A12 GND B12 GND C12 XMC_GA1_R A13 PCIe_XMC_RX2P B13 PCIe_XMC_RX2N C13 3.3V AUX A14 GND B14 GND C14 XMC_GA2_R A15 PCIe_XMC_RX4P B15 PCIe_XMC_RX4N C15 No Connection A16 GND B16 GND C16 MVMRO A17 PCIe_XMC_RX6P B17 PCIe_XMC_RX6N C17 No Connection A18 GND B18 GND C18 No Connection A19 REFCLK_100MHZ_P B19 REFCLK_100MHZ_N C19 No Connection A-5

34 T2GPX XMC Graphics Card Installation Manual Version 1.0 Table A-3. T2GPX XMC Signal Descriptions (Continued) Pin Signal Pin Signal Pin Signal D1 PCIe_XMC_TX1P E1 PCIe_XMC_TX1N F1 V_PWR D2 GND E2 GND F2 PCIe_XMC_RSTIN_L D3 PCIe_XMC_TX3P E3 PCIe_XMC_TX3N F3 V_PWR D4 GND E4 GND F4 XMC_PWRGD_R D5 PCIe_XMC_TX5P E5 PCI_XMC_TX5N F5 V_PWR D6 GND E6 GND F6 V_12V_AUX D7 PCIe_XMC_TX7P E7 PCIe_XMC_TX7N F7 V_PWR D8 GND E8 GND F8 V_12VN_AUX D9 No Connection E9 No Connection F9 V_PWR D10 GND E10 GND F10 XMC_GA0_R D11 PCIe_XMC_RX1P E11 PCIe_XMC_RX1N F11 V_PWR D12 GND E12 GND F12 XMC_PRESENT_L D13 PCIe_XMC_RX3P E13 PCIe_XMC_RX3N F13 V_PWR D14 GND E14 GND F14 SMB_DATA D15 PCIe_XMC_RX5P E15 PCIe_XMC_RX5N F15 V_PWR D16 GND E16 GND F16 SMB_CLK D17 PCIe_XMC_RX7P E17 PCIe_XMC_RX7N F17 No Connection D18 GND E18 GND F18 No Connection D19 PCIe_WAKE_L E19 PCIe_ROOT_L F19 No Connection A-6

35 A Connector Pinouts and LEDs A.5 Front-Panel LEDs Manufacturer; Part: Kingbright; 130WCP/2GYW This section is to describe the Font-Panel LEDs on the T2GPX XMC Graphics Card. Callouts indicating front-panel LEDs are shown in Figure A-5. Description and interpretation of front-panel LEDs are given in Table A-4. DisplayPort DVI-I A (Green LED) B (Yellow LED) Figure A-5. T2GPX Front-Panel LEDs Table A-4. T2GPX Front-Panel LED Behavior LED Callout Color Behavior Top a (on) A Green This LED indicates normal operating temperatures. Bottom a (on) B Yellow This LED indicates temperatures exceeding normal parameters but still under the critical temperature. Top and Bottom (on) A and B Green and Yellow Both LEDs on indicate critical temperature and requires immediate action to prevent system damage. Top and Bottom (off) A and B Frosted White (color of LED lens in off state) Both LEDs off indicate an invalid condition. Possible causes being: card is not receiving power, card is not operating correctly. Contact Themis customer support for help. a Reference to Top and Bottom applies to the orientation of the Front Panel as seen in Figure A-5. A-7

36 T2GPX XMC Graphics Card Installation Manual Version 1.0 A-8

37 B Appendix Solder Beads This appendix provides solder-bead locations and configurations for the T2GPX XMC Graphics Card. Solder beads are considered factory-configurable and must not be altered by the user. If a solder bead requires reconfiguration, contact Themis Customer Service. Warning: Solder beads are set by Themis at the factory. Attempting to alter a solder-bead configuration could seriously damage the T2GPX XMC Graphics Card. If you encounter a problem, contact Themis Customer Support. DO NOT ATTEMPT TO ALTER SOLDER-BEAD CONFIGURATIONS. B.1 Factory-Configurable Solder Beads B.1.1 T2GPX XMC Graphics Card Solder Beads Solder beads are only found on the bottom side of the T2GPX XMC Graphics Card. All solder beads are described in Table B-1 on page B-2. In Table B-1, Short means a solder bead is installed, creating an electrical path between two contacts. Open means no solder bead is installed, hence the path between the contacts is open. B-1

38 T2GPX XMC Graphics Card Installation Manual Version 1.0 Figure B-1, page B-4, shows the location of all bottom-side solder beads on the T2GPX XMC Graphics Card and their default setting. Table B-1 is arranged in groups by functionality, and all solder beads within each specific functionality will be listed in numerical order. Caution: When dealing with a 3-pin solder-bead switch, a solder bead will short only one set of pins, either 1 2 or 2 3. If a solder bead shorts more than 2 pins, call Themis Customer Support. Table B-1. T2GPX XMC Graphics Card Solder-Bead Settings (Bottom Side) Solder Bead SB1 SB4 SB5 SB6 SB7 SB8 SB9 SB10 SB13 Setting a Short Open Short Open Short Open Short Open Short Open Short Open Short Open Short Open Short Open Description A short on all the listed solder beads is required for the T2GPX XMC Graphics Card to operate as designed (normal state). B-2

39 B Solder Beads Factory-Configurable Solder Beads Table B-1. T2GPX XMC Graphics Card Solder-Bead Settings (Bottom Side) (Continued) Solder Bead SB14 SB15 SB16 SB17 SB18 SB2 SB3 SB11 SB12 Setting a Short Open Short Open Short Open Short Open Short Open Short Open Short Open Short Open Short Open Description A short on all the listed solder beads is required for the T2GPX XMC Graphics Card to operate as designed (normal state) Enable access to the onboard thermal sensor via SMBus Disable access to the onboard thermal sensor via SMBus Enable access to the onboard thermal sensor via SMBus Disable access to the onboard thermal sensor via SMBus Enables voltage monitoring of the GPU core. An open setting for this functionality results in an invalid state for the normal operation of the T2GPX XMC Graphics Card. a Boldface = the default solder-bead setting. The T2GPX XMC Graphics Card does not contain any 3-pin solder bead switches. B-3

40 T2GPX XMC Graphics Card Installation Manual Version 1.0 Front Panel SB17 SB14 SB15 SB8 SB3 SB2 SB16 SB1 SB10 SB13 SB7 SB5 SB9 SB11 SB12 Legend SB18 Solder short, pins 1 & 2 = Actual location of solder beads = Description of solder beads SB4 SB6 Bottom Side B-4 Figure B-1. T2GPX XMC Graphics Card Solder-Bead Locations (Bottom Side)

41 Index Numerics 10-bit HDR output bit memory interface bpp b addressing space x pin solder-bead switch B-2, B-3 A Advanced video capabilities 1-4 AMD xx analog 1-6 ATI Radeon xx ATI Radeon E ATI Radeon E4690 Graphics Processor 1-4 automatic power switching xx Avivo 1-3 C Cautions xxi CEA-861B video modes 1-7 CGMSA/WSS 1-4 Comments xx connector pinouts A-1 Customer Support ii D digital 1-6 DirectX DisplayPort 1.1a 1-3 DisplayPort v1.1a 1-6, A-1 Connector Pinout A-2 connector pinout and signal descriptions A-2 Signal Descriptions A-2 dithering 1-4 Dual independent display controllers 1-4 DVI-A 1-6 DVI-D Dual Link 1-6 DVI-I 1-3, A-1 Connector Pinout A-3 connector pinout and signal descriptions A-3 Signal Descriptions A-3 E E4690 Graphics Processor xx F factory-configurable B-1 Front Panel A-7 Front-Panel LED Behavior A-7 Front-Panel LEDs A-7 Full RMX 1-4 G GDDR3 1-3 GPU core B-3 Graphics Acceleration 1-5 Anisotropic Filtering 1-5 Anti-Aliasing Filtering 1-5 DirectX High Efficiency Memory Controller 1-5 H Hardware Installation 2-1 HDMI 1-7 HDTV display 1-4 Host System Board 2-2 I I/O Panel 1-6 I/O port specifications A-1 I/O Ports A-1 Index-1

42 T2GPX XMC Graphics Card Installation Manual Version 1.0 L LEDs A-7 LV1 xvii, xviii M Manual Part Number ii, xx maximum screen resolution 1-4 N Notes xxi NTSC/PAL/SECAM 1-4 O OpenGL 3.X 1-3 P PCB-Bottom B-4 PMC/XMC faceplate 2-1 S Safety Instructions iv Electrostatic Discharge (ESD) v Grounding Methods v Instructions for the Lithium Battery vi Sidebars xxi single board computer xvii SMBus B-3 Solder Bead Open B-1 Short B-1 Solder Beads B-1 Solder-Bead Locations B-4 Solder-Bead Settings B-2 Supported OS 1-3 T T2GPX 3D graphics accelerator 1-1 Features 1-3 Installation 2-1 Main Features 1-3 Overview 1-1 T2GPX (heat sink installed) xvii T2GPX (heat sink removed) 1-1, 1-2 T2GPX front panel xix T2GPX Solder Beads B-1 Technical Support 1-8 Themis Customer Support 1-8 Themis XV2 single-board computer 1-1 thermal sensor B-3 TRADEMARKS ii V Version Revision History iii Version 1.0 iii Video Display Ports 1-6 DisplayPort 1-6 DVI 1-7 Vita 42.3 Compliant 1-3 VME64 Platform xvii VME-based computer systems 2-1 voltage monitoring B-3 W Warnings xxi Website Information xx X x8 PCI-E gen 2.0 xx, 1-3 XMC based graphics solution 1-1 XMC Connector A-4 Pinouts A-4 Signal Descriptions A-5 XMC power switching 1-3 XV1 xvii, xviii XV2 xvii, xviii, 2-2 XV2 single-board computer 2-1 Y YPrPb 1-4 Index-2

43 Index Z Z cache 1-5 Z-buffer 1-5 Index-3

44 T2GPX XMC Graphics Card Installation Manual Version 1.0 Index-4

45 Place Stamp Here Bayside Parkway Fremont, CA Attn: Publications Department Fold here; tape at top to seal

46 Reader Comment Card We welcome your comments and suggestions to help improve the T2GPX XMC Graphics Card Installation Manual. Please take time to let us know what you think about this manual. Information provided in the manual was complete. Agree Disagree Not Applicable Information was well documented and easy to follow. Agree Disagree Not Applicable Information was easily accessible. Agree Disagree Not Applicable The manual was useful. Agree Disagree Not Applicable Please write down any comments you may have about this manual, including how it can be improved: Name: Title: Company: Address: