Duramax E98 Quick Start Guide
|
|
- Milo Bryan
- 5 years ago
- Views:
Transcription
1 Cindy Myers
2 2016 EFILive Limited All rights reserved First published 29 February 2016 Revised 8 June 2017 EFILive, FlashScan and AutoCal are registered trademarks of EFILive Limited. All other trademarks belong to their respective owners.
3 Contents Contents... 1 Introduction... 2 Additional Support Resources... 2 Software Version Overview... 2 Tune File Locking... 2 DSP 4 Duramax Switchable Programming... 3 Licensing Requirements... 3 GM Tuning Option Enabled... 3 VIN Licensing... 4 Reading an ECM... 5 EFILive Scan and Tune... 5 FlashScan V AutoCal... 7 Editing a Tune File... 8 Flashing the ECM EFILive Scan and Tune FlashScan V AutoCal Setting up FlashScan V2/AutoCal for Reading, Flashing and Logging using V8 Scan and Tune BBL (Black Box Logging) Configuration BBR & BBF (Black Box Reading and Flashing) Configuration Switchable Tune Configuration Quick Setup support@efilive.com
4 Introduction This document is intended to assist new EFILive customers with the basic operations and steps necessary to work with the E98 GM Diesel supported vehicles. While this guide is specific to the E98 GM Diesel ECM, it will also assist those customer who wish to tune their matching T43 TCM. For customers already familiar with existing vehicle support most of the document contents will be familiar to you already. Additional Support Resources If after reviewing this guide further assistance is required please contact the EFILive Authorised Reseller from whom you purchased your product. They are your first point of contact for EFILive support related inquiries. If your question is in relation to the actual tuning of your vehicle (i.e. how to gain performance, economy etc.) then please ask these questions on the EFILive Forum ( EFILive does not provide support or assistance for the actual tuning of any supported vehicles. Software Version Overview EFILive presently has two major software versions (V8 and V7) that service different parts of the tuning and scanning process. The V8 software is undergoing significant development and will eventually supersede V7 entirely for FlashScan V2 customers. For the moment, however, both versions are required. The following is a brief view of the activities that are performed with the different software versions: Feature V7 V8 Scanning OBDII Diagnostics Reading Flashing Tune Editing VIN License Management Firmware Management Congifure FlashScan V2/AutoCal for DSP 4 tune switching Tune File Locking Security features exist in the EFILive Tune Tool to protect tune files from being read by other tuners. Refer to the EFILocker COS Patch.pdf for detailed instructions on how to lock tune files. support@efilive.com
5 DSP 4 Duramax Switchable Programming EFILive's DSP custom operating systems for the E98 GM Diesel ECM allows customers to be able to switch 'on the fly' between multiple tunes, all stored in the ECM's flash memory. Refer to the Duramax 2p8l DSP4 User Guide.pdf for detailed instructions on how to upgrade your operating system. Licensing Requirements To Flash an E98 GM Diesel ECM, the following licensing conditions must be met: 1. For FlashScan V2, the GM Tuning Option must be enabled. 2. FlashScan V2/AutoCal must have and available VIN License (if not already licensed). GM Tuning Option Enabled To ensure that your FlashScan V2 device is licensed to tune GM vehicles: 1. Connect your FlashScan V2 or AutoCal device to your PC. 2. Open the EFILive Scan and Tune application. 3. Select the [F7: License] option in the left-hand pane. 4. Select [F2: Hardware] to display Tuning License details. 5. To purchase additional Tuning Licenses for FlashScan V2, click on the Purchase Tuning License Activation Code(s) link to order products. NOTE: AutoCal Users should contact their tuner before purchasing Tuning Licenses. 6. Enter ed Activation Code and select Activate.. support@efilive.com
6 VIN Licensing Each vehicle that you tune requires an available VIN license. The license is allocated during the flashing process. Reflashing the same controller multiple times using the same FlashScan V2/AutoCal only uses one license. To check that you have an available VIN license to allocate to your vehicle perform these steps. 1. Connect your FlashScan V2 or AutoCal device to your PC. 2. Open the EFILive Scan and Tune application. 3. Select the [F7: License] option in the left-hand pane. 4. Select [F3: VINs] to display VIN License details. 5. To purchase additional VIN Licenses, click on the Purchase Activation Code(s) link to order products. NOTE: AutoCal Users should contact their Tuner before purchasing additional VIN licenses to discuss tune file compatibility. 6. Enter ed Activation Code and select Activate
7 Reading an ECM E98 GM Diesel ECM reading is supported by; 1. EFILive Scan and Tune software (V8 software). 2. FlashScan V2. 3. AutoCal. EFILive Scan and Tune Follow these steps to read the selected controller using EFILive Scan and Tune software. 1. Connect your FlashScan V2 or AutoCal device to your PC and vehicle. 2. Turn the vehicle ignition to the On or Accessory position (vehicle must not be cranked/running when reading). 3. Open the EFILive Scan and Tune application. 4. Click on the [F3: Tune] menu and select the [F2: Read] menu option. In the Controllers: field either select Auto Detect, or right click on the controller box to use the dropdown list to select the correct controller type. A picture of the currently selected controller is shown to assist in identification. support@efilive.com
8 5. Click the Read button to initiate the read operation. While the ECM is reading an Elapsed time indicator, an Estimated Time Remaining indicator, and a Progress bar will display detailing the Read progress. 6. When the read process is complete a countdown timer will be shown. When prompted perform the following actions: a. Turn the vehicle ignition Off. b. Click on the Start button to begin the countdown timer. c. DO NOT turn the vehicle ignition on until the countdown timer expires. This time is critical to allow the ECM to perform internal functions after a read operation. 7. [F3: Calibration] summary is displayed after the countdown time is complete. 8. Save the tune file. NOTE: If this is your vehicle's stock calibration, you should ensure you make a backup of this file in case you ever need to return the vehicle to stock. support@efilive.com
9 FlashScan V2 Follow these steps to read the selected controller using FlashScan V2. 1. Setup FlashScan V2 for BBX features if not already setup. 2. Connect your FlashScan V2 device to your vehicle. 3. Turn the vehicle ignition to the On or Accessory position (vehicle must not be cranked/running when reading). 4. Navigate to the F2 Tune Tool -> F1 Tuning -> F1 Read Tune menu option. 5. Select correct controller type from BBX configured controllers. 6. Click the OK button to initiate the read operation. AutoCal Follow these steps to read the selected controller using AutoCal. 1. Install AutoCal configuration files provided by your Tuner if not already setup. 2. Connect your AutoCal device to your vehicle. 3. Turn the vehicle ignition to the On or Accessory position (vehicle must not be cranked/running when reading). 4. Navigate using the arrow keys to the Read menu option. 5. Select the correct controller type from the previously configured BBX controllers in the Read 1-5 options. 6. Click the OK button to initiate the read operation. To move calibration read files from FlashScan V2/AutoCal to your PC for editing and backup purposes; 1. Connect your FlashScan V2/AutoCal device to your PC. 2. Open EFILive Explorer. 3. Navigate to the directory on your PC where you wish to save the file. 4. Navigate to the [F3: Data Files] -> EFILive ->Tune -> Read location and drag the selected tune file to your PC
10 Editing a Tune File Follow the steps below to modify your E98 GM Diesel ECM calibration. 1. Open the EFILive V7.5 Tune Tool application 2. Click the File Open button. 3. Navigate to the location on your computer where the saved tune file you wish to open is located. Then click on the tune file to select it, and click Open. 4. Navigate to the table(s) you wish to modify by using the Windows Explorer style navigation window. 5. Edit selected table(s) by changing the values or by using the adjustment functions. support@efilive.com
11 6. A range of tune file security options can be applied in the Permissions tab (or via the V8 software using [F3: Tune] -> [F4: Properties] -> Security Restrictions tab). 7. Save changes to the tune file by using the Save tuning file, Save tuning file as, or Save tuning file for AutoCal option. If using the Save option, ensure you have a copy of your stock tune saved elsewhere. Save tuning file as, and Save tuning file for AutoCal options automatically appends a sequence number to the filename to make it unique giving users a history of sequentially numbered files with each saved change made. support@efilive.com
12 Flashing the ECM E98 GM Diesel ECM flashing is supported by; 1. EFILive Scan and Tune software (V8 software). 2. FlashScan V2. 3. AutoCal. EFILive Scan and Tune Follow the steps below to flash your E98 GM Diesel ECM controller. 1. Connect your FlashScan V2 or AutoCal device to your PC and your vehicle. 2. Turn the vehicle ignition to the On positon (not the Accessory position. Vehicle must not be cranked/running when flashing). 3. Open the EFILive Scan and Tune application. 4. Select the [F3: Tune] option in the left-hand pane. 5. Click on the Open button at the bottom left of the screen. 6. Select the calibration file for the controller you wish to flash or license. 7. If tune file security has been applied to the tune file, review and accept the Security Warning. 7. Click on the [F6:Cal Flash] or [F7: Full Flash] options in the left-hand pane
13 8. Click on the Check License button. This will indicate if the controller is already licensed or not. 9. When the Check License process is complete a countdown timer will be shown. When prompted perform the following actions: a. Turn the vehicle ignition Off. b. Click on the Start button to begin the countdown timer. c. DO NOT turn the vehicle ignition on until the countdown timer expires. This time is critical to allow the ECM to perform internal functions after a read operation. 10. If the controller is not licensed, select the Activate License button, and follow the prompts to license the controller. 11. Select Cal Flash / Full Flash button to commence the flash. Three notification screens will display. Please ensure that you read and understand the contents of these screens before proceeding with the flash operation. 12. While the ECM is flashing an Elapsed time indicator, an Estimated Time Remaining indicator, and a Progress bar will display detailing the Flash progress. 13. When the flash process is complete a countdown timer will be shown. When prompted perform the following actions: a. Turn the vehicle ignition Off. b. Click on the Start button to begin the countdown timer. c. DO NOT turn the vehicle ignition on until the countdown timer expires. This time is critical to allow the ECM to perform internal functions after a read operation. 14. Once the countdown timer is completed the flash summary will be shown. support@efilive.com
14 FlashScan V2 Follow these steps to license and flash the selected controller. 1. Setup FlashScan V2 for BBX features if not already setup. 2. Copy selected tune file(s) from your PC to FlashScan V2 if not already copied. 3. Connect your FlashScan V2 device to your vehicle. 4. Turn the vehicle ignition to the On positon (not the Accessory position. Vehicle must not be cranked/running when flashing). 5. Navigate to the F2 Tune Tool -> F1 Tuning and select either F2 Program Cal or F3 Program Full menu option. 6. Using the arrow keys, navigate to the correct tune file and select OK. 7. If the controller has not been licensed by the selected FlashScan V2 previously, you will be presented with the License this controller now? message. Select Yes to license the controller. 8. Click the OK button to initiate the flash operation. 9. When the flash process is complete the Reset Controller notification will be shown. When prompted perform the following actions: a. Turn the vehicle ignition Off. b. Click on the Start button to begin the countdown timer. c. DO NOT turn the vehicle ignition on until the countdown timer expires. This time is critical to allow the ECM to perform internal functions after a read operation. support@efilive.com
15 AutoCal Follow these steps to license and flash the selected controller. 1. Install AutoCal configuration files provided by your Tuner if not already setup. 2. Copy selected tune file(s) from your PC to FlashScan V2 if not already copied. 3. Connect your AutoCal device to your vehicle. 4. Turn the vehicle ignition to the On or Accessory position (vehicle must not be cranked/running when flashing). 5. Navigate using the arrow keys to the Prog 1-5 option for Cal Flash or the Full 1-5 options for full flash. 6. Select the correct tune file from those listed and select OK. 7. If the controller has not been licensed by the selected AutoCal device, you will be presented with the License controller? message. Select OK to license the controller. 8. Click the OK button to initiate the flash operation. 9. When the flash process is complete the Reset Controller notification will be shown. When prompted perform the following actions: a. Turn the vehicle ignition Off. b. Click on the Start button to begin the countdown timer. c. DO NOT turn the vehicle ignition on until the countdown timer expires. This time is critical to allow the ECM to perform internal functions after a read operation. support@efilive.com
16 Setting up FlashScan V2/AutoCal for Reading, Flashing and Logging using V8 Scan and Tune There are a range of configuration files that need to be programmed onto FlashScan and AutoCal to enable hardware to work in standalone mode for your controller. Each step can be programmed into the device individually, or collectively. With your FlashScan V2/AutoCal plugged in to a USB port, open V8 Scan and Tune and click on the [F5: BBX] option. BBL (Black Box Logging) Configuration 1. Select the [F2: Scan] option in the left-hand pane. 2. Remove any unnecessary controller configurations to ensure capacity restrictions are not exceeded. 3. Add the correct controller to your list; a. Press the green '+' icon. b. Right clock on the Engine Controller box. c. Select controller. d. Read and accept the BBL Information display. e. Select OK. 4. Navigate and select Available PIDs to facilitate logging. 5. Drag PID selections from the Available PIDs window into the Selected PIDs window. support@efilive.com
17 BBR & BBF (Black Box Reading and Flashing) Configuration 1. Select the [F3: Tune] option in the left-hand pane. 2. Remove any unnecessary controller configurations to ensure capacity restrictions are not exceeded. 3. Add your chosen controller(s) to your list; a. Press the green '+' icon. b. Right click on the Engine Controller or Transmission Controller box. c. Click on a selected controller. d. Select OK Switchable Tune Configuration Switchable tune configuration is only required when DSP 4 tune files are to be flashed into the ECM. 1. Select the [F4: Switch] option in the left-hand pane. 2. Enter switchable tune names you wish to display on FlashScan V2/AutoCal as appropriate. support@efilive.com
18 Quick Setup 1. Select the [F6: Quick Setup] option in the left-hand pane. 2. Edit FlashScan V2 or AutoCal Settings as required. Ensure that DSP 4 tunes can be switched after powering off FlashScan V2/AutoCal by selecting 1. [F6: Logging] > At start-up, automatically re-select the most recently used PID list. 3. Select appropriate BBX Quick Setup options. 4. To place tune files on FlashScan V2/AutoCal, add tune files to the Quick Setup using the green '+' icon. Write this configuration to FlashScan V2 or AutoCal using the [Program Quick Setup] function. The [Program Quick Setup] programs all selected Scan, Tune, Switch options, as well as selected device settings, BBX Quick Setup selections and tune files. Once the device is programmed, FlashScan V2 or AutoCal is configured for BBX functions and tune switching via FlashScan V2 or AutoCal. Each option can be programmed individually using the [Program] button on each tab, or collectively using the [Program Quick Setup] option. support@efilive.com
Duramax 2.8L E98 DSP 4 User Guide. Cindy Myers
Duramax 2.8L E98 DSP 4 User Guide Cindy Myers Duramax 2.8L E98 DSP 4 User Guide 1998 EFILive Limited All rights reserved First published 29 October 2015 Revised 7 June 2017 EFILive, EFILive FlashScan and
More informationEFILive Cummins HD User Guide - CM2350A, CM2250, CM2220, CM2880
- CM2350A, CM2250, CM2220, CM2880 Cindy Myers - CM2350A, CM2250, CM2220, CM2880 1998 EFILive Limited All rights reserved First published 7 September 2017 Revised 9 February 2018 EFILive, EFILive FlashScan
More informationDuramax LB7/LLY DSP 5 User Guide
Duramax LB7/LLY DSP 5 User Guide Cindy Myers Duramax LB7/LLY DSP 5 User Guide 1998 EFILive Limited All rights reserved First published 18 January, 2007 Revised 29 August 2018 EFILive, EFILive FlashScan
More informationEFILive AutoCal Information for End Users
EFILive AutoCal Information for End Users Cindy Myers EFILive AutoCal Information for End Users 2010 EFILive Limited All rights reserved First published 01 July 2010 Revised 7 June 2017 EFILive, EFILive
More informationDuramax LBZ/LMM DSP 5 User Guide
Duramax LBZ/LMM DSP 5 User Guide Cindy Myers Duramax LBZ/LMM DSP 5 User Guide 1998 EFILive Limited All rights reserved First published 03 October, 2009 Revised 29 August 2018 EFILive, EFILive FlashScan
More informationDSP 4 Phone / Tablet App for E98 GM Diesel Controllers. Cindy Myers
DSP 4 Phone / Tablet App for E98 GM Diesel Controllers Cindy Myers DSP 4 Phone / Tablet App for E98 GM Diesel Controllers 1998 EFILive Limited All rights reserved First published 28 February 2017 Revised
More informationInstalling the EFILive LB7/LLY DSP2 & DSP5 Custom Operating Systems
Installing the EFILive LB7/LLY DSP2 & DSP5 Custom Operating Systems Ross Myers Installing the EFILive LB&/LLY DSP2 & DSP5 Custom Operating Systems 2007 EFILive Limited. All rights reserved First published
More informationInstalling the EFILive DSP2 & DSP5 Custom Operating Systems Revision 2
Installing the EFILive DSP2 & DSP5 Custom Operating Systems Revision 2 Installing the EFILive DSP2 & DSP5 Custom Operating Systems Copyright 1998-2008 EFILive Limited. All rights reserved First published
More informationInstalling the EFILive DSP² Custom Operating System & Using the DSP² features of EFILive V7
Installing the EFILive DSP² Custom Operating System & Using the DSP² features of EFILive V7 Ross Myers Installing an EFILive DSP² Custom Operating System & Using the DSP² features of EFILive V7 Copyright
More informationEFILive HD File Conversion Guide
EFILive 1998 EFILive Limited All rights reserved First published 26 January 2018 Revised 12 February 2018 EFILive, EFILive FlashScan and EFILive AutoCal are registered trademarks of EFILive Limited. All
More informationNext thing you want to check for is if the truck has an aftermarket key fob or security system or satellite radio. If you are not sure, please check
Next thing you want to check for is if the truck has an aftermarket key fob or security system or satellite radio. If you are not sure, please check the back of the OBD port for a PURPLE wire. Follow that
More informationSerial Wideband Tutorial
Serial Wideband Tutorial Andy Reyna (TAQuickness) Serial Wideband Tutorial Copyright 1998-2008 EFILive Limited and Andy Reyna All rights reserved First published Aug 16, 2008 Revised Sep 02, 2008 Disclaimer:
More informationLoading ed.CTZ or.coz tune files onto your AutoCal or V2 Step 1: EFILive Scan and Tune
Loading Emailed.CTZ or.coz tune files onto your AutoCal or V2 Step 1: EFILive Scan and Tune 1. Make sure you have the most up to date EFILive software downloaded to your Windows Computer. 2. Most Current
More informationInstalling the EFILive E38 / E67 ECM Ethanol Custom Operating System
Installing the EFILive E38 / E67 ECM Ethanol Custom Operating System Installing the EFILive E38 / E67 Ethanol Custom Operating System Copyright 1998-2009 EFILive Limited. All rights reserved First published
More informationDodge Cummins Package Contents
2010 2012 Dodge Cummins EFILive Instructions ------------------------------------------------------------------ Package Contents AutoCal W/ 1 Pre-loaded Tune AutoCal Cables USB & OBDII Koozi PPEI Flash
More informationEFILive Error Codes. Paul Blackmore
EFILive Error Codes Paul Blackmore EFILive Error Codes 2009 EFILive Limited All rights reserved First published 5 May 2009 Revised 16 June 2017 EFILive, FlashScan and AutoCal are registered trademarks
More information*.csv. EFILive V8 Reference. Cindy Myers
*.csv EFILive V8 Reference Cindy Myers 2012 EFILive Limited All rights reserved First published 09 August 2012 Revised 30 June 2018 EFILive, FlashScan and AutoCal are registered trademarks of EFILive Limited.
More informationEFILive USB driver Error Code Error Description Cause Action
EFILive USB driver Error Code Error Description Cause Action $0001 USB internal driver error (invalid handle) $0002 USB device is not connected FlashScan or AutoCal is not connected to the PC s USB system.
More informationGreen Diesel Flash-Scan 3 Tool Instructions
Green Diesel Flash-Scan 3 Tool Instructions GDE Flash Tunes are installed and modified by our new touch screen hand-held programmer. The tool is delivered after being tested for functionality. Below are
More informationFlashScan V2 Quick Start
This page deliberately left blank. Inside front cover. Paul Blackmore and Jesse Bubb Copyright 1998-2008 EFILive Limited All rights reserved First published Oct 25, 2006 Revised Sep 21, 2011 Edited by:
More informationBench Harness Wiring Pinouts
Bench Harness Ross Myers Bench Harness Copyright 1998-2007 EFILive Limited All rights reserved First published Oct 16, 2005 Revised Apr 17, 2007 EFILive, FlashScan and AutoCal are a registered trademarks
More informationEXPRESS. Users Guide. Version 3.5
EXPRESS Users Guide Version 3.5 Table of Contents 1 System Overview... 3 2 System Requirements... 3 3 Contents in ECMTUNE System Box... 3 4 Installation Information... 4 5 Registration Information... 7
More informationPROFESSIONAL. Users Guide. Version 3.5
PROFESSIONAL Users Guide Version 3.5 Table of Contents 1 System Overview... 3 2 System Requirements... 3 3 Contents in ECMTUNE System Box... 3 4 Installation Information... 4 5 Registration Information...
More informationPRODUCT SERVICE INFORMATION
PRODUCT SERVICE INFORMATION Document number: P0019 For further technical information regarding testing, repairs or to search for New or Remanufactured Automotive electronic products, please visit www.injectronics.com.au,
More informationPredator Revision Update Instructions PREP:
Predator Revision Update Instructions (for Trinity, please see Trinity Update Instructions): PREP: You Need USB/Serial Cable and Power Source #U7778 OR Serial/Serial Cable and Power Source #U7777 (For
More informationFirmware, Database, & PC Application Update Installation Instructions
Firmware, Database, & PC Application Update Installation Instructions IMPORTANT Please read before you begin the installation. To avoid possible errors, it is recommended to install the updates as described
More informationSpectrometer Visible Light Spectrometer V4.4
Visible Light Spectrometer V4.4 Table of Contents Package Contents...3 Trademarks...4 Manual Driver and Application installation...5 Manual Application Installation...6 First Start of the Application...8
More informationEFILive Command Line Reference
Paul Blackmore 2012 EFILive Limited All rights reserved First published 28 August 2016 Revised 11 June 2018 EFILive, FlashScan and AutoCal are registered trademarks of EFILive Limited. All other trademarks
More informationActive Power Programmer Instructions
Active Power Programmer Instructions Installation 1. Before you install the software, DO NOT PLUG the devices usb port into your computer. You will be ask to do this later in the installation 2. Run the
More informationOBDI RT Tuner Quick Start Guide
OBDI RT Tuner Quick Start Guide Revision A Page 1 Table of Contents Introduction...3 Minimum PC Requirements...3 Program Installation...3 Registering the Program...4 Select the Desired ECM Definition Files...6
More informationData Acquisition Instructions
Page 1 of 26 Form DAQ2_A 01/23/2007 Superchips Inc. Superchips flashpaq Data Acquisition Instructions Visit Flashpaq.com for downloadable updates & upgrades to your existing tuner. Page 2 of 26 Form DAQ2_A
More informationFirmware, Database, & PC Application Update Installation Instructions
Firmware, Database, & PC Application Update Installation Instructions IMPORTANT Please read before you begin the installation. To avoid possible errors, it is recommended to install the updates as described
More informationDynamic Spectrum Tuner Quick Start Guide
COPYRIGHT The JET DST OBDII Tuner software is copyright 2005 with all rights reserved. The distribution and sale of this software are for the exclusive use of the original purchaser for use exclusively
More informationPREMIUM FUEL REQUIRED VEHICLE CALIBRATION INFORMATION
VEHICLE CALIBRATION INFORMATION THIS KIT WAS SHIPPED WITH AN UNPROGRAMMED SCT HAND HELD PROGRAMMING DEVICE (7416-INST). THE DEVICE MAY NOT HAVE THE LATEST SOFTWARE INSTALLED. FAILURE TO UPDATE SCT DEVICE
More informationUser Guide. Subaru Turbo (North American Models)
User Guide Subaru Turbo (North American Models) Page 2 Table of Contents Product Introduction 4 Supported Vehicle List 4 In-Box Contents 5 What Is A Map? 7 AccessPORT Installation 8 Pre-Installation 8
More informationMy Personal Flasher (MPF) - User Guide for Android
My Personal Flasher (MPF) - User Guide for Android Table of Contents Connection to Android... 2 Droid Personal Flasher Use... 5 Dealer update... 7 1 Connection to Android Pre-Requisites: You MUST have
More informationEASE Vehicle Interface Setup Instructions
USB Interface Setup Note: These directions should be followed only after the EASE Scan Tool has been installed. Note: Visit www.fixcarsfaster.com for video setup instructions to supplement these instructions.
More information!!!---WARNING---!!! 2011 DYNOJET RESEARCH ALL RIGHTS RESERVED FOR RACING VEHICLE USE ONLY
!!!---WARNING---!!! FOR RACING VEHICLE USE ONLY Note: This product is not for use on roads or vehicles subject to emission control requirements and is not legal for use or installation on motor vehicles
More informationvbound User Guide vbound User Guide Version Revised: 10/10/2017
vbound User Guide Version 4.1.1 Revised: 10/10/2017 Copyright 2014-2017 FFL Solutions Inc. Page 1 of 87 Table of Contents Using vbound...5 Starting vbound... 5 Bound Book List... 6 vbound Ribbon Menu...
More informationNumaView Software. Addendum to T-Series Manuals TELEDYNE API (TAPI) 9970 CARROLL CANYON ROAD SAN DIEGO, CALIFORNIA USA
NumaView Software Addendum to T-Series Manuals TELEDYNE API (TAPI) 9970 CARROLL CANYON ROAD SAN DIEGO, CALIFORNIA 92131-1106 USA Toll-free Phone: 800-324-5190 Phone: +1 858-657-9800 Fax: +1 858-657-9816
More informationFURIOUS TRUE-D DIVERSITY RECEIVER V3.6 Attitude
FURIOUS TRUE-D DIVERSITY RECEIVER V3.6 Attitude USER S MANUAL Please contact us if you need further assistance: Tech support: tech@furiousfpv.com Sales support: sales@furiousfpv.com Website: http://furiousfpv.com/
More informationClient Care Desktop V4
Client Care Desktop V4 V4.1 Quay Document Manager V4.1 Contents 1. LOCATIONS...3 1.1. Client... 3 1.2. Holdings... 4 1.3. Providers... 4 1.4. Contacts/Introducers... 5 1.5. Adviser... 5 2. ADDING EXISTING
More informationUser Manual Australia
User Manual Australia April 2009 EAZ0057B06A Rev. A Trademarks Acknowledgements Snap-on, ShopStream Connect, ETHOS, MODIS, SOLUS, SOLUS PRO, and Vantage PRO are trademarks of Snap-on Incorporated. All
More informationIMPORTANT. Installing your EASE Scan Tool Software
Thank You for purchasing the EASE Diagnostics Scan Tool! Video install instructions to supplement these print instructions are available, if necessary, at www.fixcarsfaster.com. The videos are broken down
More informationIn order to receive a user name, password and tunes, you must do the following 3 things:
1 GETTING STARTED In order to receive a user name, password and tunes, you must do the following 3 things: 1. Fill out the disclaimer with all of your info and fax to 828-692-9968 or email it to sales@spartandieseltech.com.
More informationHARD DISK INSTALLATION:
7. PC INTERFACE SIMCHECK II OWNER S MANUAL 7. PC PROGRAMS While SIMCHECK II, or SIMCHECK II se, is a stand-alone unit, the product includes the Communications Programs that allow you to upgrade your SIMCHECK
More informationUser Guide. Rebit Backup. https://rebitbackup.rebitgo.com
User Guide Information in this document is subject to change without notice. 2017 Rebit Inc. All rights reserved. Reproduction of this material in any manner whatsoever without the written permission of
More informationOVERVIEW: This bulletin involves inspecting and if required, updating the radio software.
NUMBER: 08 046 17 GROUP: 08 Electrical DATE: June 8, 2017 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced,
More informationSmarty Touch User Guide
Smarty Touch User Guide Thank you for purchasing the Smarty Touch! We have put a lot of hard work into the production of this tuner, and we sincerely hope you enjoy it. This is a guide that explains most
More informationClient Care Desktop v4.3. Document Manager V4.3
Client Care Desktop v4.3 Document Manager V4.3 Contents 1. LOCATIONS... 3 1.1. Client... 3 1.2. Enquiries... 4 1.3. Holdings... 4 1.4. Providers... 5 1.5. Contacts/Introducers... 6 1.6. Adviser... 6 2.
More informationServer Edition. V8 Peregrine User Manual. for Linux and Unix operating systems
Server Edition V8 Peregrine User Manual for Linux and Unix operating systems Copyright Notice and Proprietary Information All rights reserved. Attix5, 2015 Trademarks - Red Hat is a registered trademark
More informationAbrites Diagnostics for Mitsubishi User Manual
Abrites Diagnostics for Mitsubishi User Manual Version: 1.6 www.abrites.com Manual version: 1.6 1 List of Revisions Date Chapter Description Revision 29.Aug.2012 First version of the document. 1.0 06.Jun.2013
More informationDesktop & Laptop Edition
Desktop & Laptop Edition USER MANUAL For Mac OS X Copyright Notice & Proprietary Information Redstor Limited, 2016. All rights reserved. Trademarks - Mac, Leopard, Snow Leopard, Lion and Mountain Lion
More informationTECHNICAL BULLETIN DATE: 15-DEC-2015
CUSTOM TUNE INSTALLATION INSTRUCTIONS JEEP- JK (3.8L) NON-INTERCOOLED / INTERCOOLED SUPERCHARGER SYSTEM SUMMARY: In conjunction with Diablosport, Sprintex is continually seeking to ensure you have the
More informationCLIQ Web Manager. User Manual. The global leader in door opening solutions V 6.1
CLIQ Web Manager User Manual V 6.1 The global leader in door opening solutions Program version: 6.1 Document number: ST-003478 Date published: 2016-03-31 Language: en-gb Table of contents 1 Overview...9
More informationServer Edition. V8 Peregrine User Manual. for Microsoft Windows
Server Edition V8 Peregrine User Manual for Microsoft Windows Copyright Notice and Proprietary Information All rights reserved. Attix5, 2015 Trademarks - Microsoft, Windows, Microsoft Windows, Microsoft
More informationServer Edition USER MANUAL. For Mac OS X
Server Edition USER MANUAL For Mac OS X Copyright Notice & Proprietary Information Redstor Limited, 2016. All rights reserved. Trademarks - Mac, Leopard, Snow Leopard, Lion and Mountain Lion are registered
More informationOutlook and Outlook Web App. Sharing and Accessing Subfolders
Outlook and Outlook Web App Sharing and Accessing Subfolders Table of Contents Sharing a Subfolder... 3 Outlook 2013/2016... 3 Assign Sharing Permission to The Desired Folder(s)... 3 Assign Folder Visible
More informationSpork Installation Instructions
Table of Contents 1. Table of Contents 1 2. Requirements... 1 3. Bluetooth Connection Process 2 4. Software Installation... 3 5. Retrieving Spork s Serial Number... 4 6. Retrieving the ECU s ROM Calibration..
More informationDocAve Content Shield v2.2 for SharePoint
DocAve Content Shield v2.2 for SharePoint User Guide For SharePoint 2007 Revision A Issued August 2012 1 Table of Contents Table of Contents... 2 About DocAve Content Shield for SharePoint... 4 Complementary
More informationOBDII Programmer Quick Start Guide
COPYRIGHT The C.A.T.S. OBDII Programmer is copyright 2005 with all rights reserved. The distribution and sale of this software are for the exclusive use of the original purchaser for use exclusively on
More informationHPA OnePort Flashing Instructions for MED17 ECU. NOTE: Windows 8, 8.1, and 10 users will need to follow these instructions before proceeding:
HPA OnePort Flashing Instructions for MED17 ECU Congratulations on your purchase of the HPA OnePort flashing device. This compact OBD II dongle gives you the power to flash HPA software tunes to your ECU
More informationATS e-track Certified BAFX
Driver: Before you start, you must have a Driver Login, Password and Vehicle ID from your Administrator. Any other apps running on this tablet/phone that communicate to the BAFX must be stopped and shutdown.
More informationSecure Single Sign On with FingerTec OFIS
Secure Single Sign On with FingerTec OFIS User Guide CONTENTS 3 1 INTRODUCTION Welcome to OFIS Gateway 4-11 2 INSTALLATION & SETUP Registering Your OFIS Gateway Installing & Setting Up Your OFIS Gateway
More informationFUYLTower Software Upgrade - Instructions
Overview This instructional is intended for those wishing to upgrade their FUYL Tower software. This procedure may be required from time to time when significant features become available in a new software
More informationLab 3-1 Lab Installing Kofax Capture 10
In the following lab instructions, you re going to install and license Kofax Capture, turn on User Tracking, review the product documentation, and prepare your system for the lab exercises in this course.
More informationSetup support for RAMCHECK. Extensive, context-sensitive On-Line Help and Tutorials. HARD DISK INSTALLATION:
RAMCHECK OWNER S MANUAL While RAMCHECK is a stand-alone unit, the product includes the RAMCHECK PC Communications programs that allow you to upgrade your RAMCHECK s flash EPROM from our Web site (www.innoventions.com).
More informationTechnical Service Bulletin
37 Transmission shudders on acceleration 24 10 12 2022600/1 March 30, 2010 Model(s) Year VIN Range Vehicle-Specific Equipment A4 2009 2010 All A5 2009 2010 All 2.0 TFSI and 0AW Gearbox Condition Vehicle
More informationCONTROL4 INTEGRATION WITH THE SHADE STORE MOTORS CONTROL4 INTEGRATION OVERVIEW:
CONTROL4 INTEGRATION WITH THE SHADE STORE MOTORS CONTROL4 INTEGRATION OVERVIEW: Take your motorized window treatment experience to the next level by integrating them into your Savant smart home control
More informationQUICK START INSTALLATION GUIDE
QUICK START INSTALLATION GUIDE !!!---WARNING---!!! FOR RACING VEHICLE USE ONLY Note: This product is not for use on roads or vehicles subject to emission control requirements and is not legal for use or
More informationThank you for Purchasing a OVTune EcuTek Calibration four your 2016 Mazda MX5 ND
Thank you for Purchasing a OVTune EcuTek Calibration four your 2016 Mazda MX5 ND This Instruction PDF will cover: Updating your Kit with a EcuTek License Verifying your ECU Version Flashing a Supplied
More informationHARD DISK INSTALLATION:
While RAMCHECK is a stand-alone unit, the product includes the Communications Programs that allow you to upgrade your RAMCHECK s flash EPROM from our Web site (www.innoventions.com). The PC programs software
More informationTECHNICAL SERVICE BULLETIN
GROUP ELE NUMBER MODEL 2014MY Soul (PS) DATE 058 March 2014 TECHNICAL SERVICE BULLETIN SERVICE ACTION: BCM UPGRADE - IPM LOGIC This bulletin provides information related to the reprogramming of the Body
More informationTECHNICAL SERVICE BULLETIN
GROUP ELE NUMBER MODEL 2014MY Sorento (XMa) DATE 057 (Rev 3, 09/11/2014) January 2014 TECHNICAL SERVICE BULLETIN This bulletin has been revised to include additional information. New/revised sections of
More informationOBD Auto Doctor. User Manual for ios (iphone and ipad) Copyright 2018 Creosys Ltd
OBD Auto Doctor User Manual for ios (iphone and ipad) Copyright 2018 Creosys Ltd User Manual for ios (iphone and ipad) 1. Introduction 1.1 Platform and Hardware Requirements 1.2 Supported Adapters 1.3
More informationBackupVault Desktop & Laptop Edition. USER MANUAL For Microsoft Windows
BackupVault Desktop & Laptop Edition USER MANUAL For Microsoft Windows Copyright Notice & Proprietary Information Blueraq Networks Ltd, 2017. All rights reserved. Trademarks - Microsoft, Windows, Microsoft
More informationUser Documentation. Influx Technology. DiaLog Quick Start Guide
User Documentation DiaLog Quick Start Guide Influx Technology WWW.INFLUXTECHNOLOGY.COM 1 Introduction... 3 2 Software... 3 2.1 DiaLog Installation... 3 2.2 Rebel Drivers Installation... 5 2.3 Software
More informationALDL Bluetooth Adapter
1320 Electronics LLC for: ALDL Bluetooth Adapter Contents Warnings 3 Specifications 4 Quick Start Instructions 5 Installing the 'ALDL Bluetooth adapter' 6 Operating the ALDL Bluetooth Adapter 7 Bluetooth
More informationQuick Lookups OBD-II/EOBD. Scanner. Tools. Previous Vehicle and Data ETHOS EDGE G E TT I N G STA RT E D PAC K. diagnostics.snapon.
Scanner OBD-II/EOBD Previous Vehicle and Data Tools ETHOS EDGE BC diagnostics.snapon.com/ethosedge Quick Lookups G E TT I N G STA RT E D PAC K FEATURES Touch Screen No / Cancel Button Yes / Accept Button
More informationHEX FLASH ECU PROGRAMMING TOOL
HEX FLASH ECU PROGRAMMING TOOL Contents 2 introduction 3-4 installation in Windows 8 5-7 manual driver install 8-15 read and writing to ECU 1 P a g e INTRODUCTION Thank you for purchasing the HEX FLASH
More informationPortable Data Terminal
Arch User Guide ver. 25 Classification: Document History Date Version Changed By Details 2016-03-06 1.0 Michelle Lategan Created Document Document Version 1.0 Last Update: Table of Contents Page 1 of 16
More informationOVERVIEW: This bulletin involves inspecting and if required, updating the radio software.
NUMBER: GROUP: 08 053 17 REV. C 08 Electrical DATE: October 27, 2017 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced,
More informationAutomate Pulse Set-Up Instructions
Automate Pulse Set-Up Instructions ABOUT THE AUTOMATE SHADES SKILL The Automate Pulse app allows for control of your motorized window coverings through your smartphone/tablet THE APP ALLOWS FOR: Individual
More informationDIABLOSPORT PREDATOR REVISION UPDATE INSTRUCTIONS
DIABLOSPORT PREDATOR REVISION UPDATE INSTRUCTIONS This page contains instructions that will guide you through the process of updating the DiabloSport Predator to the latest software revision available.
More informationECUTEK ON INFINITI VR30
ECUTEK ON INFINITI VR30 INTRODUCTION Welcome and thank you for being a customer of Visconti Tuning! This guide is broken into sections which you can jump around between by clicking on each of the chapters
More informationOMNI Flow Computers, Inc. Last Updated: 19-June-2009 OMNI CPU Rev B
OMNI Flow Computers, Inc Last Updated: 19-June-2009 TB-071201B OMNI 68 6201 CPU 52-0000-0015 Rev B NOTE: User Manual Reference This Technical Bulletin complements the information contained in the User
More informationDATE: February 27, 2018
NUMBER: GROUP: 08 002 18 REV. A 08 Electrical DATE: February 27, 2018 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be
More informationINTEGRATION OVERVIEW:
AMX Intergration AMX INTEGRATION OVERVIEW: Take your motorized window treatment experience to the next level by integrating them into your AMX smart home control system. The integration supports isolated
More informationALDL Bluetooth Adapter with USB (MK2)
1320 Electronics LLC for: ALDL Bluetooth Adapter with USB (MK2) Contents Warnings 3 Specifications 4 Quick Start Instructions 5 Installing the 'ALDL Bluetooth adapter' 6 Operating the ALDL Bluetooth Adapter
More informationSuperchips 1705 MAX MicroTuner Ford Powerstroke 7.3L Turbo Diesel Vehicles Vehicle Programming Instructions
Page 1 of 12 Form 0126K 10/26/2004 Superchips Inc. Superchips 1705 MAX MicroTuner Ford Powerstroke 7.3L Turbo Diesel Vehicles Vehicle Programming Instructions PLEASE READ THIS ENTIRE INSTRUCTION SHEET
More informationLOCAL FLEET TRACKING. Quick Start Guide
LOCAL FLEET TRACKING Quick Start Guide HOW TO SET UP THE CONTROL PANEL... 3 HOW TO SET UP A BOOKMARK... 5 HOW TO DISPLAY VEHICLE HISTORY... 7 HOW TO EDIT VEHICLE INFORMATION... 8 HOW TO CHANGE THE ACCOUNT
More informationELAN INTEGRATION WITH THE SHADE STORE MOTORS ELAN INTEGRATION OVERVIEW:
ELAN INTEGRATION WITH THE SHADE STORE MOTORS ELAN INTEGRATION OVERVIEW: Take your motorized window treatment experience to the next level by integrating them into your ELAN smart home control system. The
More informationipod Tutorial Includes lessons on transferring music to ipod, playing music, and storing files on ipod
ipod Tutorial Includes lessons on transferring music to ipod, playing music, and storing files on ipod apple Apple Computer, Inc. 2004 Apple Computer, Inc. All rights reserved. Apple, the Apple logo, Apple
More informationDIRECT LINK FLASH TUNER
DIRECT LINK FLASH TUNER Quick Start Guide This Guide is intended to answer basic Direct Link tuning questions and to act as a Quick Start Guide. It is not intended to be encyclopedic on the tuning process
More informationRelease Date: September 4, 2014
MV1DU User s Guide Release Date: September 4, 2014 Use of the MV1DU Diagnostic System requires an active license agreement or MV-1 Dealer Agreement. For information on obtaining a license, please email
More informationHPA OnePort Flashing Instructions for MED9 ECU. NOTE: Windows 8, 8.1, and 10 users will need to follow these instructions before proceeding:
HPA OnePort Flashing Instructions for MED9 ECU Congratulations on your purchase of the HPA OnePort flashing device. This compact OBD II dongle gives you the power to flash HPA software tunes to your ECU
More informationAvaya MultiService Software Update Manager User Guide
Avaya MultiService Software Update Manager User Guide April 2002 Avaya MultiService Software Update Manager 3.2 User Guide Copyright Avaya Inc. 2002 ALL RIGHTS RESERVED The products, specifications, and
More informationWireless Setup Instructions
Wireless Setup Instructions THESE INSTRUCTIONS ARE VERY IMPORTANT TO SECURE YOUR WIRELESS NETWORK The purpose of this procedure is to "lock" your router so other users can not access your network without
More informationCountdown Timers for TradeStation Author: Rick Maus Date: August 5, 2016 Version: 1.1
Countdown Timers for TradeStation Author: Rick Maus Date: August 5, 2016 Version: 1.1 Version Description 1.0 Initial document. 1.1 Added Version history table. Some minor font size adjustments throughout
More informationDBT-120 Bluetooth USB Adapter
DBT-120 Bluetooth USB Adapter Rev.2.1 (09/25/2002) 2 Contents Introduction... 5 Package Contents... 6 Installing Bluetooth Software... 6 Hardware Installation... 8 Introduction to Bluetooth Software...
More information