Appearance Type Setting distance Sensing area Model Remarks Camera with lighting. 34mm to 49mm 5mm x 4.9mm to 9mm x 8.

Transcription

1 -C/25 Easy Vision Touch, Connect & Go Easy vision intuitive teach & go user interfaces Live built-in LCD touch monitors for setup and iediate feedback Counication centralized setup & inspection via Ethernet Flexible 1 or 2 camers, colour or monochrome Performance High speed & additional processing tools Ordering Information Controllers Appearance Power supply Circuit type Model DC21.6 to 26.4V NPN -C PNP -C25 Cameras Appearance Type Setting distance Sensing area Model Remarks Camera with lighting Monochrome type to 49 5 x 4.9 to 9 x.9 -SR10 Cable length: 2m 3 to x 9. to 50 x 49 -SR50 (-SC50) Color type to 49 5 x 4.9 to -SC10 9 x.9 Camera only Monochrome type Color type to x 9. to 50 x to x 49 to 90 x to x 9 to 150 x 14 The CCTV lens is selected according to the of detection and the installation distance. -SC50 -SC50W(IP67) -SC90 -SC90W(IP67) -SC150 -SC150W(IP67) -S -SC 1

2 Cables Type Cable Model length Camera Normal type 3m, m -VS Cable *1 Robot cable type 3m -VSR Camera Normal type 3m -XC3A *2 Extension m -XCA *2. Cable Robot cable type 3m -XC3AR *2. Parallel I/O Cable 2m, 5m -VP RS-2C Cable 2m -XPT2A RS-422 Cable 2m -XPT2B Monitor Cable 2m, 5m FZ-VM *1. It is necessary for -S and -SC. -SR_/SC_ is a cable drawing out type, it doesn't use it. *2. Up to two camera extension cables can be connected to the camera cable as long as the total cable length between the controller and the camera does not exceed 19 m. Accessories Type Model Console -KP (2m / 5m) LCD Monitor FZ-M0 Panel Mount Adapters -XPM Optional bar lighting ZFV-LTL01 Lighting *1 bar doublelighting ZFV-LTL02 bar low-angle ZFV-LTL04 lighting light source for through beam ZFV-LTF01 CCTV Lenses/Extension Tubes series External Lighting 3Z4S-LT series Strobe Controller *2 Manufactured by MORITEX Corporation 3Z4S-LT MLEK-CE1TSX *1. It is possible to -SC50 and -SC90 use it. Specifications Controller *2. It is possible to -S and -SC use it. It uses it so that the controller may control an external lighting. Item -C -C25 Number of connected cameras 2 Connectable camera -SR_/SC_/S/SC Processing resolution When -SR_/SC_ is connected:464 (H) x464 (V) When -S/SC is connected:60 (H) x464 (V) Display LCD monitor 3.5" TFT color LCD (3 x 240 pixels) Indicator "Measuring" indicator (color: green): RUN Trigger indicator (color: blue): ENABLE Judgment indicator (color: o): OUTPUT Error indicator (color: red): ERROR External I/F Parallel Interface Input 12 points (RESET, DSA, DI0 to, TRIG) Output 22 points (OR, ERROR, RUN, ENABLE, GATE, STGOUT0, DO0 to 15) Circuit type NPN PNP Serial Interface USB2.0 1 port, FULL SPEED, MINI-B connector RS-2C 1 port, max bps (cannot be used simultaneously with RS-422 interface) RS port, max bps (cannot be used simultaneously with RS-2C interface) Network Ethernet 1 port, BASE-TX/10BASE-T counications Monitor output Analog RGB output, 1 ch (resolution VGA: 640 x 40) Memory card I/F SD card slot 1 ch Operation I/F Touch panel, key operation, console connection Main Number of registered banks banks functions Number of setup items 12 items/1 bank Measurement Shape inspection Pattern search, sensitive search, flexible search, graphic search items Size inspection Area, labeling Edge inspection Position, width, count Brightness/ Brightness, HUE color inspection Application-based Defects, grouping inspection Position correction 1 model search, 2 model search, position, area, labeling Additional Image memory function Max. images (when 2 cameras are connectred, 50 images/camera) functions Analysis function Logging monitor Menu language Japanese/English (can be switched) Ratings Power supply voltage 21.6 to 26.4 VDC (including ripple) Current consumption 1.5 A max. Insulation resistance Across all lead wires and controller case: MΩ (by 250 V megger) Dielectric strength Across all lead wires and controller case, 0 VAC, 50/60 Hz, 1 min 2 Vision Systems

3 Item -C -C25 Operation environment robustness Material Weight Accessories Camera Ambient temperature Ambient humidity Ambient atmosphere Degree of protection Vibration resistance (durability) Shock resistance (destructive) Operating: 0 to + 50 C, Storage: -15 to +60 C (with no icing or condensation) Operating and storage: 35% to 5% (with no condensation) No corrosive gases allowed IP (IEC60529) Vibration frequency: 10 to 150 Hz Single-amplitude: 0.35 Acceleration: 50 m/s 2 10 times for minutes in X, Y, and Z directions 150 m/s 2 3 times each in 6 directions (up/down, left/right, forward/backward) Case: Polycarbonate (PC), Plate face: PMMA Approx. 650 g Touch pen (-TP), Exhaust unit (-EU), Terminal block adapter (-XTB), (2 p'ces), Item -SR10 -SR50 -SC10 -SC50 /SC50W Detection (H x V) Detection V H Relationship between setting distance and detection 5 x 4.9 to 9 x.9 to x 9. to 50 x 49 3 to x 4.9 to 9 x.9 to x 9. to 50 x to SC90 /SC90W 50 x 49 to 90 x 9 67 to SC150 /SC150W 90 x 9 to 150 x to S (monochrome type) -SC (color type) The CCTV lens is selected according to the detection and the setting distance. Image capture element All-pixel capture inter-line transfer type 1/3" CCD (monochrome) All-pixel capture inter-line transfer type 1/3" CCD (color) All-pixel capture inter-line transfer type 1/3" CCD (monochrome) Effective number of pixels 659(H) x 494 (V) Pixel size 7.4 µm (H) x 7.4 µm (V) Shutter speed 1/0 to 1/4000 1/500 to 1/000 1/500 to 1/000 Partial function (partial capture) All-pixel capture inter-line transfer type 1/3" CCD (color) OFF 1/2 partial, 1/4 partial Not available 1/2 partial, 1/4 partial Image rate function Fine, Normal, High speed Not available Fine, Normal, High speed Frame rate (at capture of entire screen) 96 fps 90 fps Lens mount C mount Lighting Lighting method Pulse lighting LED Red LED White LED Type Guide light Optional lighting I/F 5 9 Direct lighting Available (center, measurement region) Not available Not available Not available Available (ZFV-LT Series) Not available Indicator Class 1 Class 2 Class 2 Class 1 Class * Not available Available External lighting: 3Z4S-LT *1. Series Flash Controller: made by Moritex Corporation 3Z4S-LT MLEK-CE1TS *1 3

4 Item -SR10 -SR50 -SC10 -SC50 /SC50W Ratings Operation environment robustness Power supply voltage (supplied from Controller) Current consumption Ambient temperature Ambient humidity Ambient atmosphere Degree of protection Dielectric strength Vibration resistance (durability) Shock resistance (destructive) 15 VDC 15 VDC, 4 VDC 15 VDC, 4 VDC Approx. 0 ma Approx. 350 ma (15 VDC: approx. 150 ma, 4 VDC: approx. 0 ma) (including current consumption when optional lighting is connected) Operating: 0 to + 40 C, Storage: - to +65 C (with no icing or condensation) Operating and storage: 35% to 5% (with no condensation) No corrosive gases allowed IP65 (IEC60529) 0 VAC 50 Hz/60 Hz 1 min -SC : IP65 (IEC60529), -SC W: IP67 (IEC60529) 10 to 150 Hz Single-amplitude times for min each in X, Y, and Z directions 150 m/s 2 3 times each in 6 directions (up/down, left/right, forward/backward) Approx. 0 ma (15 VDC: approx. 150 ma, 4 VDC: approx. 0 A) (including current consumption when external lighting is connected) Operating: 0 to + 50 C, Storage: - to +65 C (with no icing or condensation) IP (IEC60529) Connection method Cable built-in type (cable length: 2 m) Connector connection type (camera cable -VS/VSR required) Material Case: ABS, : PBT Case: Aluminum die-cast, Cover: Zinc-plated copper plate 0.5 thick, Camera base: ABS Weight Accessories Approx. 0 g (including and cable) (ZFV-XMF) 1 p'ce, 2 p'ce, (ZFV-XMF) 1 p'ce, Approx. 270 g (including and cable) (ZFV-XMF2) 1 p'ce, Warning label 1, *1. 3Z4S-LT are not yet released for oversaeas. *2. Applicable standards IEC6025-1:1993 +A1:1997 +A2:01, EN6025-1:1994 +A2:01 -SC90 /SC90W Approx. 0 g (including and cable) (ZFV-XMF2) 1 p'ce, Warning label 1, -SC150 /SC150W Approx. 600 g (including and cable) -S (monochrome type) Approx. 0 g -SC (color type) 4 Vision Systems

5 CCTV Lenses The CCTV Lenses and Extension Tubes described in this page are not yet released. Optical Graph If using the -S/SC Camera (Camera only), refer to the optical graph below and select the lens and Extension Tubes. The lens to be selected will depend on the size of the measurement object and the camera distance. Camera Only -S/SC Camera distance A () Camera distance A () t1.5 t1.5 t35 t 5 t t1.5 t40 t 5 t1.5 t t t Field of vision L () 00 0 CCTV Lenses t40 t35 t45 0 t60 t 5 t 0 5 t t45 t35 t t Field of vision L () ML-0614 ML-013 ML-1214 ML-1614 ML-2514 ML-3519 ML-501 t: Extension Tube length The value "" indicates applications where an Extension Tube is not needed and the value "" indicates applications where a 5- Extension Tube is used. ML-7527 ML-35 Meaning of Optical Graph The X axis of the graph shows the field of vision L (), and the Y axis shows the camera distance A (). Camera distance A () Field of vision () Camera Extension Tube thickness: t () Lens Model Appearance ML-0614 ML-013 ML-1214 ML-1614 CCTV Lens ML-2514 ML-3519 ML-501 ML-7527 ML-35 dia. dia..5 dia..5 dia dia dia. 29 dia. 37 dia dia Focal length Brightness F1.4 F1.3 F1.4 F1.4 F1.4 F1.9 F1. F2.7 F3.5 Filter size M27 P05 M25.5 P0.5 M27 P0.5 M27 P0.5 M27 P0.5 M27 P0.5 M P0.5 M P0.5 M P0.5 5

6 External Dimensions Controllers (Unit: ) -C/C (1) (90) 72 (1) (75) Optional Lighting ZFV-LTL01 ZFV-LTL04 ± P5. 9 = Two sets of three, M3 Depth: 5 Four, M4 (through-hole) ± ±0.1 ± P5. 9 = Two, M3 Depth: 5 69± ZFV-LTL02 ZFV-LTF01 ±0.1 74±0.1 ±0.1 74±0.1 Four, M4 (through-hole) (light-emitting surface) P5. 9 = (light- emitting surface) Four, M3 Depth: Vision Systems

7 4 Cameras -SR10/SR50 -SC90/90W /4-UNC /4-UNC Mounting hole dimensions ± dia. standard length 2 m Mounting brackets can be mounted on each side Output for external lighting 6.2 dia. standard length 2 m 3.9 Mounting hole dimensions ± Mounting brackets can be mounted on each side SC10 -SC150/150W /4-UNC Mounting hole dimensions ± 0.1 Heat-resistant PVC shielded cable 6.2 dia. standard length 2 m dia. standard length 2 m 17.9 Mounting brackets can be mounted on each side. 10 ± Mounting surface Heat-/oil-resistant PVC shielded cable 5 dia. standard length Focus adjustment control Mounting hole dimensions, depth 6 U1/4-UNC, depth 5 -SC50/50W -S/SC /4-UNC 2 dia dia. standard length 2 m Mounting hole dimensions ± (14.5) (15.5) "-UN-2A (C mount) (46.5) 54.5 (6.3) (. dia.) (29.5) ± 2 1/4"-UNC, depth (4.).45 (1.5) Output for external lighting Mounting brackets can be mounted on each side ± 2 ± 0.1, depth LCD Monitor FZ-M0 Console -KP Mountable plate thickness: 1.6 to 4. (5.5) (6) (103.5) (129.4) (31.5) 161 (173.4) (15) 75 4-M (1) (172) 2 Panel cutout dimensions (90) dia. standard length 2 m,5m