Actualtests.9A QA

Transcription

1 Actualtests.9A QA Number: 9A0-351 Passing Score: 800 Time Limit: 120 min File Version: A0-351 Adobe Illustrator CC Recertification Exam Marvelous planning guide pass your ideas in exceptionally genuine way. Dump is flawlessly legitimate, You recently need to precisely comprehend the Questions and the Answers and you don't spare it by heart however comprehend it. I picked the right track for passing my certification exam with time-saving and pragmatic study material of Examcollection. It is sole wellspring of my success in light of substantial Questions with suitable Answers. Good Luck to all for the next certification exam.

2 Exam A QUESTION 1 You are starting with the text shown at the left side of the exhibit. How should you edit it so that the text follows the inside of the circle as shown at the right side of the exhibit? A. Adjust the value for D to move the text inside the circle. B. Adjust the value for C to move the text inside the circle. C. Drag bracket B toward the center of the circle. D. Drag bracket A toward the center of the circle. QUESTION 2 How would you navigate between multiple artboards using the Artboards panel? A. Click the Artboard Options icon. B. Click the arrows at the bottom of the panel. C. Double-click the name of the artboard. D. Double-click the number of the artboard. Correct Answer: D QUESTION 3

3 You created area type but the container is too wide. How should you make it narrower without distorting the type? A. With the Type tool, drag the right side of the container. B. With the Scale tool, drag the right side of the container. C. With the Selection tool, drag the middle square handle on the right side of the container. D. With the Selection tool, drag the round blue handle on the right side of the container. QUESTION 4 After exporting an Illustrator file to PDF, you notice that some transparent objects were flattened. What are two reasons objects would have been flattened? (Choose two) A. The document was saved with Compatibility set to Acrobat 4 (PDF 1.3). B. The Illustrator file contained PSD files with transparent areas. C. The PDF document was created by using File > Export instead of File > Save As. D. The PDF document was saved with Standard set to PDF/X-4:2008. E. The Illustrator file contained Illustrator artwork placed as EPS files. D QUESTION 5 You have built a color illustration. Before printing, you want to see how each ink color plate will appear, individually. Which technique should you use? A. Use the Flattener Preview Panel B. Choose View > Overprint Preview C. Choose View > Proof Colors D. Use the Separations Preview Panel QUESTION 6 How should you replace an existing global swatch with another swatch? A. Delete the existing swatch, then rename the new swatch to match the deleted swatch.

4 B. Open the Swatch Options dialog box and change the new swatch name to match the existing swatch. C. Command+drag (OS X) or Ctrl+drag (Windows) the new swatch over the existing swatch. D. Option+drag (OS X) or Alt+drag (Windows) the new swatch over the existing swatch. Correct Answer: D QUESTION 7 Which of these goals is a reason to use point type instead of area type? A. You want to add labels under city symbols on a map. B. You want to convert type to editable outlines. C. You want to enter text that wraps at a specific width. D. You want to thread paragraphs of text from one shape to another. QUESTION 8 You are working on a document that contains objects on multiple layers. You want to edit several objects on a specific layer while still seeing artwork on other layers, but without the chance of accidentally modifying artwork on those other layers. What is the best way to do this? A. Select the layer you want to edit and choose Enter Isolation Mode from the Layers panel menu. B. Double click an object located on the layer that you want to edit. C. Ctrl+Shift+click (Windows) or Option+Shift+dick (OS X) the lock icon next to the layer you want to edit. D. Click the target icon on the layer that you want to edit. QUESTION 9 How can you find the complementary color for a selected swatch? A. Choose a swatch in the Kuler Panel. B. Choose Edit > Edit Colors > Blend Front to Back. C. Choose a Color Guide Harmony Rule. D. Choose a color in the Swatches Panel. Correct Answer: D QUESTION 10 You apply a drop shadow to your object and notice it appears to be low resolution. What is the reason for

5 this? A. In the Flatten Transparency dialog box, the Low Resolution preset is selected B. In the Flattener Preview panel, the Low Resolution preset is selected. C. In the Document Setup dialog box, the Low Resolution transparency preset is selected. D. In the Document Raster Effects Settings dialog box, Screen Resolution is selected. QUESTION 11 Identify a unique benefit of using an SVG compared to other web graphic formats. A. Creates an editable raster format. B. Supported on all web browsers. C. Won't lose quality if zoomed or resized. D. Smaller file size compared to other formats. QUESTION 12 You print a document with gradients and it has a banding issue. What can you do to lessen the banding? A. Change the blending mode or opacity of the gradient. B. Use only gradients blending less than three colors. C. Rasterize your gradient during printing. D. Expand your gradient into a gradient mesh. QUESTION 13 If you delete the custom name of a process color swatch and then click OK, what happens? A. The swatch name will be left blank. B. You will be prompted to enter a swatch name. C. The swatch will be named using the color formula. D. The existing swatch name will not change.

6 QUESTION 14 How can you select a group of objects that are contained within another group (i.e., a nested group)? A. Click on the group with the Selection tool B. Alt+click (Windows) or Option+click (OS X) with the Selection tool C. Click on the group with the Direct Selection tool D. Alt+click (Windows) or Option+click (OS X) with the Direct Selection tool QUESTION 15 You are drawing a shape with the Pen tool. As you are drawing you click and drag to add an anchor point with a direction line. You then realize you need to reposition the anchor point. Without releasing the mouse button, how can you reposition that anchor point while drawing? A. Hold down Ctrl+Alt (Windows) or Cornrnand+Option (OS X) and reposition the anchor point. B. Hold down the Shift key on the keyboard and reposition the anchor point. C. Hold down the spacebar key on the keyboard and reposition the anchor point. D. Continue dragging until the anchor point begins to move. Correct Answer: D QUESTION 16 Which option lets you expand the height and width of the selected text without changing the size of the container? A. A B. B C. C D. D

7 Correct Answer: D QUESTION 17 You select a path that contains a solid color fill and choose Object > Create Gradient Mesh. Now, with the Mesh Tool active, how would you add additional mesh points of a different color? A. With the gradient mesh deselected, set the desired fill color and click to create a new mesh point. B. With the gradient mesh deselected, set the desired fill color and click on an existing mesh point. C. With the gradient mesh selected, set the desired fill color and click on an existing mesh point. D. With the gradient mesh selected, set the desired fill color and click to create a new mesh point. QUESTION 18 You are printing a document with multiple artboards. What will happen if "Ignore Artboards" is enabled? A. Only the selected artboard will print. B. None of the artboards will print. C. All artboards will print on a single page. D. Each art board will print on separate pages. QUESTION 19 You are designing assets for the user interface of an OS X application, but the type you set in Illustrator doesn't match up well with how type looks in the operating system. How should you adjust the type? A. In the OpenType panel, choose the Contextual Alternates option. B. In the Character panel, choose an Anti-Aliasing Method. C. In the Appearance panel, choose Rasterize from the Effects menu. D. In the Paragraph panel, choose a Justification option.

8 QUESTION 20 You have several images in your Links Panel. What does the symbol to the right of Image03.jpg mean? A. The image is a symbol. B. The image is embedded. C. The image link is missing. D. The image link has been modified. QUESTION 21 You have drawn a shape in Illustrator with a fill of none and a stroke of 1 pt. With the Width tool selected, how could you precisely adjust one side of the stroke to 7.5 pt and the other side of the stroke to 8 pt? A. Double-click on the path and enter the desired values for each side of the stroke. B. Press the shift key and drag each side of the stroke to the desired amount. C. Press Alt (Windows) or Option (OS X) and drag each side of the stroke to the desired amount. D. Click and drag each side of the stroke to the desired amount. QUESTION 22 What is a good reason to create a paragraph style and apply it to text? A. You want to enable OpenType features for a line of text. B. You want to format text consistently across all artboards. C. You want to apply different formatting to individual words. D. You want to format tabular content such as a restaurant menu.

9 QUESTION 23 You paint with the Eraser tool over an area containing multiple objects. When you release the mouse button, only a few of the objects in the painted area have been erased. What are two reasons not all the objects were erased? (Choose two.) A. Several items were symbols. B. Several items were filled with a spot color when erasing. C. Several items were selected when erasing. D. Several items were expanded objects when erasing. E. Several items were mapped to a perspective grid. E QUESTION 24 What would you conclude is the difference between Sublayer A and Sublayer B? A. Sublayer A is a clipping group. B. Sublayer A contains appearance attributes. C. Sublayer A is currently in isolation mode. D. Sublayer A is currently selected.

10 QUESTION 25 You have created a symbol and have added several instances of it to the artboard. You want to make an edit to the symbol and update all instances of the symbol. What are two ways this be achieved? (Choose two). A. Double-click on the symbol instance with one of the symbolism tools. B. Double-click on the symbol instance with the Direct Selection tool. C. Select an instance of the symbol, choose Object > Expand, and edit the symbol. D. Double-click on the symbol instance with the Selection tool. E. Right-click on a symbol instance and choose Isolate Selected Group. D QUESTION 26 You want to vary the width of one side of a stroke, in one area of a path, using the Width tool. How can you achieve this result? A. Choose an option from the Variable Width Profile menu in the Control panel, then click and drag to the side of the path that you want to modify. B. In the Stroke panel, change the alignment of the stroke on the path in the direction that you want the stroke modified. C. Using the Width tool, click and drag to the side of the path that you want to modify. D. Choose the Width tool, hold down the Option key (OS X) or Alt key (Windows), and drag in the direction that you want to modify the stroke. QUESTION 27 How would you adjust the color of selected artwork using a Color Group in your Swatches Panel? A. Choose a Harmony Rule In the Color Guide panel. B. Click the Color Group button in the Swatches panel. C. Click the Edit or Apply Colors button in the Color Guide panel. D. Choose Edit > Edit Colors > Adjust Color Balance. QUESTION 28 You have created 10 circles and you would like them to be distributed across the entire width of the artboard. You select the circles and click the Horizontal Distribute Center button in the Align panel but nothing happens. What changes would you make to fix the problem? A. Choose Align to Selection from the Align To pop-up menu in the Align panel. B. Choose Align to Artboard from the Align To pop-up menu in the Align panel. C. After selecting all the objects, click the artboard to set the key object.

11 D. Enter the page width in the Distribute Spacing field. Correct Answer: D QUESTION 29 You want to create several circles that appear within the shape of a star, which two methods could you use to achieve this result? (Choose two.) A. Draw a star, enable Draw Inside mode, select the Ellipse tool, and draw circles inside of the star. B. Draw the star on top of the circles, select all of the items, and then create a compound path. C. Draw the star on top of the circles, select all of the items, and then create a clipping mask. D. Draw the star on top of the circles, select all of the items, and then group them together. C Accurate now. QUESTION 30 You have generated CSS in your design, and in the CSS Properties Panel you want to paste one character style's CSS code into a web design application. How should you transfer the code? A. Right+click on a style and choose Export Options from the context menu. B. Right+click on a style and choose Generate CSS from the context menu. C. Select a style, then click the Export Selected CSS button. D. Select a style, then click the Copy Selected Style button. QUESTION 31 You want to see if the font you are using contains the ligature that you can use instead of the fl letter combination. Where can you examine the complete character set of the font? A. The Character panel. B. The Glyphs panel. C. TheOpenType panel. D. The Find Font dialog box Updated. QUESTION 32 How would you view only the artboard on screen and hide your toolbar and panels?

12 A. Choose View > Edit Views. B. Click the Document Setup button in the Control panel. C. Click the Change Screen Mode button in the Tools panel. D. Choose View > Hide Windows. E. Choose Window > Hide All Windows. Correct Answer: E QUESTION 33 You are exporting a document with multiple artboards in the.png format. What would the results be if the "Use Artboards" option is selected? A. The artboards will be exported separately with a transparent backgrounds. B. Each artboard will be exported separately with white backgrounds. C. The artboards will be exported in one file with a white background. D. The artboards will be exported in one file with a transparent background. Correct Answer: D QUESTION 34

13 How should you modify an existing fill for text using the Appearance panel? A. Double-click Type (A). B. Double-click Characters (B). C. Click the Add New Stroke button (C). D. Click the Add New Fill button (D). QUESTION 35 You want to make specific areas of an object partially or completely transparent based on the gray values of a second object placed in front. How should you set up the two objects? A. Select both objects and choose Object > Compound Path > Make. B. Group the two objects and choose Object > Clipping Mask > Make. C. Select the object in front and apply the Overlay blending mode. D. Draw or paste the second object into the first object's opacity mask. QUESTION 36 Which symbolism tool allows you to change the stacking order of symbol instances? A. Symbol Shifter B. Symbol Scruncher

14 C. Symbol Sizer D. Symbol Spinner QUESTION 37 You are attempting to convert an object from spot color to RGB using Edit Colors but Convert to RGB is dimmed (you cannot select it). What must you do first to allow Edit Colors to convert to RGB? A. Delete the spot color swatches in the Swatches Panel. B. Choose Edit > Assign Profile. C. Choose File > Document Color Mode > RGB. D. Choose Edit > Edit Colors > Convert to CMYK first. Correct Answer: D QUESTION 38 Which two image types are acceptable choices when creating an art brush? (Choose two.) A. A linked AI file. B. An embedded PSD file. C. An embedded PDF file containing text. D. A linked PSD file. E. An embedded grayscale TIFF file. Correct Answer: DE QUESTION 39 You'd like to set numbers in type using old style proportional figures, and the font you're using contains those characters. Where do you select the Proportional Oldstyle option? A. TheOpenType panel. B. The Character panel. C. The Glyphs panel. D. The Find Font dialog box. QUESTION 40

15 Which Image Trace Panel option gives you the ability to trace your image using the Document Library swatches? A. Preset (A) B. View (B) C. Mode (C) D. Palette (D) Correct Answer: D QUESTION 41 You have added a perspective grid to your document. You create some text and move it onto one of the planes of the grid, but notice that the text is no longer editable. Which technique allows you to apply text to a perspective grid but keeps the text editable? A. Convert the text to a compound path and move the compound path to the perspective grid. B. Convert the text to a symbol and move the symbol to the perspective grid, C. Create the text as an area type object and move it to the perspective grid. D. Use an OpenType font for the text and, move it to the perspective grid. Super valid. QUESTION 42 How would you preview your artwork in a grayscale color mode?

16 A. Choose Edit > Color Settings and adjust to Grayscale. B. Delete all color swatches from the Swatches panel except grayscale swatches, C. Choose View > Proof Setup and then choose Customize. D. Choose File > Document Color Mode > Grayscale. QUESTION 43 You are creating a pattern in Illustrator and would like to experiment with the H Spacing and V Spacing options in the Pattern Options panel however those options are grayed out. What changes would you make in the Pattern Options panel to enable the H Spacing and V Spacing options. A. Enable the Move Tile with Art option. B. Enable the Size Tile to Art option. C. Switch to the Grid tile type. D. Switch to the Brick by Row or Brick by Column tile type. QUESTION 44

17 You want to convert an area type object to a point type object. How should you do this? A. Right+double+click the edge of the frame. B. Right+click the edge of the frame and choose Point. C. Double-click the center point handle. D. Double-click handle B. E. Double-click handle A. Refrence: QUESTION 45 You've drawn a rectangle on the artboard, then you add multiple ovals on top of that rectangle. You want the ovals to "punch through" the rectangle. Which shape mode in the Pathfinder panel will achieve this result? A. A B. B C. C D. D QUESTION 46

18 What would you conclude about the Illustrator object displayed in the Exhibit? A. The object is a gradient mesh. B. The object is a live paint object. C. The object is a nested group. D. The object is being viewed in isolation mode. E. The object is a compound path. 'A' is appropriate option. QUESTION 47 Which properties are only displayed in the Info panel when transforming or moving an object? A. Radius and Diameter B. Distance and Angle C. x and Y Coordinates D. Width and Height QUESTION 48 You notice using Pixel Preview that the edges of some objects appear fuzzy. How should you identify these objects? A. Choose Select > Same > Appearance B. Choose Select > Object > Not Aligned To Pixel Grid C. Choose Select > Object > Point Type Objects D. Choose Select > Same > Blending Mode

19 QUESTION 49 How can you change this so that where the two objects overlap, you see green (a combination of yellow and blue)? A. Select the blue object and choose Screen from the Blending Mode pop-up menu in the Transparency panel. B. Select both objects and choose Unite in the Shape Modes section of the Pathfinder panel. C. Select the blue object and enable the Overprint Fill checkbox in the Attributes panel. D. Select both objects and choose Intersect in the Shape Modes section of the Pathfinder panel. Correct Answer: D QUESTION 50 You are working on an Illustrator image and wish to receive comments as a Work In Progress in Behance. How would you do this while in Illustrator? A. Choose File > Share on Behance and tag your document as Work In Progress. B. Choose File > Export and choose Behance as the format. Then choose Work in Progress C. Choose File > Share on Behance. Then change the Visible To setting to Feedback Circle. D. Choose File > Share on Behance. Then change your Visible To setting to Everyone. QUESTION 51 You create several overlapping objects in Illustrator and apply the Screen blending mode to those objects. You then group the objects and move the group onto a different colored background and notice that the appearance of those objects changes. How can you prevent the colors from changing when moved onto a background object of a different color?

20 A. Choose Isolate Blending in the Transparency panel. B. Change the opacity to 0% in the Transparency panel. C. Choose Knockout Group in the Transparency panel. D. Choose Opacity & Mask Define Knockout Shape in the Transparency panel. Rechecked.