WIFI KIT WallCam Quick Setup Guide

Transcription

1 WIFI KIT WallCam Quick Setup Guide V-Con Intelligent Security Pvt. Ltd. B-71 Phase VII, Industrial Area, Mohali , Punjab (India) Toll Free No I customercare.wallcam@videocon.com

2 Videocon WallCam WIFI KIT Welcome Thank you for purchasing Videocon WallCam product. This manual is designed as a reference for the installation and operation of our CCTV cameras. Before installation and operation please read the following instructions carefully! Certification & Compliance: This equipment has been tested and found to comply with FCC, CE, RoHS and ISO standards. Note: This document contains preliminary information and subject to change without notice. PACKING DETAIL:- The content of the package include: 1. Fully assembled WIFI/IP Camera - 4N/8N 2. WIFI NVR 1N 3. Screw Set 4N/8N 4. Caution Sticker - 4N 5. Power Adapter for NVR 1N 6. Power Adapter for Cameras 4N/8N 7. Mouse 1N 8. User Manual 1N 9.Remote - 1N If any of the part is missing or damaged, please contact the dealer you purchased the WallCam from or call WallCam Customer Service. 2. Camera Installation Instruction of WIFI NVR KIT Safety Caution: Please do not put any fluid container on the product. Please use the product in ventilated environment and prevent blocking the vents. Please use the original power supply to prevent damage to the product. Please use the product under its standard working temperature and humidity i.e. xxxxxxxx. Dust on PCB may cause short circuit. It is suggested to clean the dust on PCB timely to make the product work properly. 1. NVR

3 Note: A network cable is required to connect the Wireless NVR to the Wi-Fi Router. Setup The System This NVR has embedded Linux operating system and just like a desktop PC, need to connect with any TV or monitor by using HDMI or VGA input. 1.Install antennas for the cameras and the NVR. 2.Connect a screen to the NVR via HDMI or VGA cable (HDMI and VGA cable are not included in the kit). 3.Plug the NVR to a power source. 4.Plug the Cameras to a power source. 5.As soon as you switch on the power, the cameras would start functioning. 6.Plug in the mouse to an USB port if a wired mouse is included in the kit. Video Playback on NVR To enter the video playback system, click the right button on the mouse>>> video playback>>>manual search. Now you can select the specific channel and time and click on playback to start the same. The default user id is admin and password is <blank>. To change the password, right click the mouse>>>go to system setup>>>system admin>>>>user management. HDD Installation Video Backup With the help of a U disk, it is very convenient and easy to copy a video for backup. Follow the instructions below for taking a video backup. 1.2 USB Ports: Plug U flash drive in the USB port of NVR. Right click on main menu>>>video backup>>>choose backup channel>>>choose video mode>>setup searching time>>>search>>>choose recording file on the list>>>video backup. It supports U-flash disk up to 32GB, recording videos at hourly intervals, i.e. one hour at a time 2. 1 USB Port : Right click on main menu>>>video backup>>>choose backup channel>>>choose video mode>>>setup searching time>>>search>>>choose recording file on the list>>>video backup, insert U flash disk within reminding 1 minute, the system will backup recording file to U flash disk. Video Recording 1.Record Time: You can set the time periods for video recording in your NVR. Right click the mouse>>>system Setup>>>Record Setup>>>Record Plan. The default recording time is 24x7. 2.Manual Record: Right click the mouse>>>manual Record. You can turn on or off the recording of a particular channel as you desire. The Red dot right on the corner means that manual recording is ON. 3.Motion Record: Motion record means certain channel(s) will be recorded only when movement is detected. Click right button on the mouse>>>system Setup>>>Record Setup>>>Record Plan. By unselecting time and selecting motion, the channel(s) will record only when motion is detected.

4 Remote view on Desktop/Laptop 1. If your PC and NVR is connected with the same LAN(which means they are connected to the same router).find the IP address and port number of your NVR. The IP address of the NVR can be found in System Setup>>>Network Setup. (a.) Open your internet explorer browser and go to (b.) Enter device ID, User name and password to login. Default user name is admin and password is <blank>. ( C.) Device ID can be found at the right bottom corner of the NVR screen, the status of the NVR should be online. 2. Enter the NVR s IP address in your IE browser. For example, (if the default web port 80 has been changed to e.g. 100, you will have to add new port when entering the IP address in the browser e.g. Live Viewing on Mobile 1. Download the IP PRO app from your play store/app store. 3. Follow the following steps if you want to access your NVR from different location.

5 2. Add the NVR system to your application s device list. Open the IP PRO app, login with your account and choose trail>>>click on + to add device by ID (you can find the same in network setup or right bottom corner of NVR screen)>>>>enter description e.g Home Camera>>> enter Username and password and submit to get back to the device list. Now click on the device to view the cameras. Menu Bar Click right button of your mouse to enter the main menu. The following screen will appear. Video playback on Mobile While viewing the live video streaming, by clicking on playback option, you will enter in playback menu. The app will play the video of channel 1 but you can switch the same as per your desire. Split Screen : In this option, you can select the single or multiple camera view. Video Manage : Manage IP cameras and NVR channels. System Setup : All System settings. Video Playback : Playback recorded videos Video Backup : Backup recorded videos. Color adjust : Adjust the image setting of each camera. Manual record : shortcut to change the record settings. Volume: Adjust volume of audio cameras (works only for audio cameras). Setup Wizard: Step by step guide of general settings. Fast Network : Shortcut to network settings. Exit System : Options for logout, reboot, close screen output and shutdown the system. System Setup Click the right button on your mouse>>>select System Setup to enter into this system setup option. 1. General Setup: This enables you to choose a desired Language, adjust the Time or Display resolution, Name of each channel, or even switch from one camera to another. 2. System Admin: This enables you to view or set System Version, System Maintenance including system upgrade, User and password management, Restore to default settings, System log, also providing HDD information. 3. Record Setup : Record pan for each channel video detection. 4. Channel Setup : Allows you to manage channels and cameras. 5. Network Setup : All network related settings are available in this option. Add Cameras: In order to add cameras manual, user can follow following steps:

6 Note: For detailed operation introduction, please download detailed manual from our website All the designs, software and user interface are subject to change without prior written notice. All trademarks and registered trademarks mentioned are the properties of their respective owners. If there is any uncertainty or controversy, please refer to the final explanation of us. Please visit our website or contact your local service engineer for more information. The user interface may slightly vary according to your Smartphone. All the features and specifications mentioned in this manual may vary from model to model. For details on warranty, please visit our website Right click on main menu>>>video management to enter the interface. There are two ways to add IP cameras 1) Match code and 2) Auto add. Select auto add option and the cameras will transmit video image to NVR by network cable. If users need to re-match code, camera will transmit video image to NVR wirelessly and IP address Extend WIFI Range The range of the WIFI single will decrease while going through obstacles. Some methods can be applied to extend the WIFI range. > Position the Antenna Correctly. The antenna of the NVR should be put straight up, if not, the WIFI signal will be weak. Refer below images for the same. correct method fault method