FB-Hygia.book Page 1 Monday, June 21, :58 PM GRUNDFOS PRODUCT GUIDE. Sanitary pumps. Centrifugal pumps 60 Hz

Size: px

Start display at page:

Download "FB-Hygia.book Page 1 Monday, June 21, :58 PM GRUNDFOS PRODUCT GUIDE. Sanitary pumps. Centrifugal pumps 60 Hz"

Marlene Short
5 years ago
Views:

1 FB-ygia.book Page Monday, June, : PM GRUNDFOS PRODUCT GUIDE Sanitary pumps FB Centrifugal pumps z

2 FB-ygia.book Page Monday, June, : PM Contents Mission Mission Introduction Grundfos sanitary pumps ygienic design Performance range FB, -pole FB, -pole Product data Technical data Applications Features and benefits Construction Pump housing 7 Impeller 7 Connections 7 Surface finish 7 Mechanical shaft seals 7 Motor Design variations Certification Approvals and certificates 9 Certificates 9 FB /, -pole FB /, -pole FB /, -pole FB /, -pole 7 FB /, -pole FB /, -pole 9 FB /, -pole FB /, -pole FB /, -pole FB /, -pole FB 7/, -pole FB 7/, -pole FB /, -pole FB /, -pole 7 FB /, -pole FB /, -pole 9 FB /, -pole FB /, -pole FB /, -pole FB /, -pole Dimensions FB pump on foot-mounted motor FB pump on foot-mounted motor FB pump with feet and support bars FB pump with feet and support bars 7 Identification Type key Installation Mechanical installation Space requirements Elimination of noise and vibration Curve charts ow to read the pump curves Curve conditions

our mission - the basis of our existence - to successfully develop,

contributing to a better quality of life and a healthy environment

Allentown, Pennsylvania Oakville, Ontario One of the largest pump

motors in the world World headquarters in Denmark North American

companies in countries More than million motors and pumps produced

3 FB-ygia.book Page Monday, June, : PM Mission Sanitary pumps FB Mission - It is our mission - the basis of our existence - to successfully develop, produce and sell high-quality pumps and pumping systems world-wide, contributing to a better quality of life and a healthy environment Bjerringbro, Denmark Fresno, California Olathe, Kansas Monterrey, Mexico Allentown, Pennsylvania Oakville, Ontario One of the largest pump companies in the world The second largest manufacturer of submersible motors in the world World headquarters in Denmark North American headquarters in Kansas City - Manufacturing in Fresno, California companies in countries More than million motors and pumps produced annually worldwide North American companies operating in USA, Canada and Mexico Continuous reinvestment in growth and development enables the company to BE responsible, TINK ahead, and INNOVATE

4 FB-ygia.book Page Monday, June, : PM Introduction Sanitary pumps FB Grundfos sanitary pumps Stainless steel sanitary pumps designed for a wide range of hygienic and sanitary applications such as: food and beverage life science/pharmaceutical personal care water treatment. The Grundfos range of sanitary pumps is comprised of a range of single- and multi-stage end-suction centrifugal pumps and side-channel, self-priming pumps, each state-of-the-art within its specific field of application. The pumps can be fitted with a variety of features to adapt to specific pumping tasks. In addition, it is possible to customize the pumps for optimum function or performance in relation to the job at hand. FB Single-stage, end-suction centrifugal pumps. The pumps offer heads up to 79 ft, flow rates up to US GPM and operating pressures up to PSI. Pipe connections range from. inch to inch and motor sizes from. to p. ygienic design The Grundfos sanitary pumps have been designed in accordance with the strictest hygienic design criteria. The surface finish of the materials used is of paramount importance to prevent possible breeding grounds for bacteria and to facilitate efficient and thorough cleaning using CIP (Cleaning-In-Place) processes. Fully drainable models are available, and the use of AISI L (DIN EN./.) cold-rolled and/or forged stainless steel ensures a homogeneous, pore-free surface in contrast to cast materials. The design, materials and material surface finish are subject to a variety of national and international rules and regulations, guidelines and laws. Among these are the EU Machinery Directive, the GMP (Good Manufacturing Practices) rules and regulations, the FDA (Food and Drug Administration) regulations, the A Sanitary Standards, the EU foodstuff hygienic guidelines, the DIN EN Biotechnology Standard as well as the EEDG (European ygienic Engineering & Design Group) and the QD (Qualified ygienic Design) criteria. Mechanical shaft seals Single-seal and quenched seal arrangements are available as required for the application and the pumped liquid. The seals offer trouble-free operation. Connections A variety of connections are available, such as Tri- Clamp to DIN 7, female NPT and ANSI lb flanges.

5 FB-ygia.book Page Monday, June, : PM Performance range Sanitary pumps FB FB, -pole 9 / / FB rpm 7 / / / 7/ / / / Q [US GPM] / Q [m³/h] TM 9 9 FB, -pole 9 FB 7 rpm / / 7 / / / / / Q [US GPM] / 7/ / Q [m³/h] TM 9 9

6 FB-ygia.book Page Monday, June, : PM Product data Sanitary pumps Fig. FB Technical data TM 9 Construction FB pumps are single-stage, end-suction centrifugal pumps, designed to meet the hygienic requirements of sterile process technology. The pumps are CIP and SIP capable in compliance with the DIN EN performance criteria. The design of the wetted parts complies with: QD criteria EEDG recommendations for CIP cleanability (validated by the TNO Quality of Life institute) A Sanitary Standards (A -). For explanation, see Certificates, page 9. ead: up to ft Flow rate: up to 7 US GPM Operating pressure: up to PSI Operating temperature: up to F (up to F on request) Sterilization temperature: F (SIP) (Sterilization-In-Place). Applications The unique hygienic design and the materials used make the FB pump range suitable for these applications: Fig. Certification Materials A- Beverages Beer, soft drinks, alcohol, wine, fruit drinks, yeast, etc. Dairies Milk, whey, cream, condensed milk, etc. Confectionery Syrup, sugar solutions, etc. Meat packing Liquid fat, frying oil, smokehouse spray, blood processing, etc. Features and benefits Support options for motor and pump for flexible installation meeting -A requirements. Extremely reliable operation under most working conditions for low maintenance cost; use same pump in variety of applications. Optimized hydraulics for high efficiency and reduced power consumption. Semi-closed impeller design for increased suitability for applications involving low-viscosity liquids and liquids containing particles. Fig. Sectional drawing of FB pump Pos. Component Material DIN/EN AISI/ ASTM Impeller CrNiMo steel. L Pump housing CrNiMo steel. L Shaft seal Seal faces: Carbon/stainless steel or SiC/SiC O-rings: EPDM or FKM Pump shaft CrNiMo steel.7 Ti Motor Feet and support bars Stainless steel TM 7 9

FB-ygia.book Page 7 Monday, June, : PM Product data Sanitary pumps FB Pump housing The pump housing is made of heavy-duty, rolled and deep-drawn CrNiMo steel to DIN EN., the equivalent of AISI L.

7 FB-ygia.book Page 7 Monday, June, : PM Product data Sanitary pumps FB Pump housing The pump housing is made of heavy-duty, rolled and deep-drawn CrNiMo steel to DIN EN., the equivalent of AISI L. Impeller FB pumps feature a cast stainless steel, semi-closed impeller. Mechanical shaft seals The operating range of the shaft seal depends on the type of shaft seal, the operating pressure and the liquid temperature. As standard, FB is fitted with a single, inboard, mechanical shaft seal with an optimum position in the pumped liquid. This ensures lubrication and cooling as well as CIP (Cleaning-In-Place) and SIP (Sterilization- In-Place), according to the criteria of hygienic design. Seal faces of carbon/stainless steel or SiC/SiC and O-rings of EPDM or FKM are standard. Other seal face material pairings are available on request. Grundfos offers the following shaft seal types as standard: Fig. Semi-closed impeller Connections GR99 O-ring shaft seal with open spring driver The seal is suitable for non-sanitary applications. Standard connections Clamps for Tri-Clamp. Connections on request ANSI lb flanges Internal NPT thread. Surface finish In order to meet the demands of the pharmaceutical, food and beverage industries, all contact surfaces of the product have a surface finish of <.µ Ra. Fig. O-ring shaft seal with open spring driver p [bar] TM t [ C] TM Fig. Operating range of O-ring shaft seal with open spring driver : EPDM : EPDM and FKM. 7

8 FB-ygia.book Page Monday, June, : PM Product data Sanitary pumps O-ring shaft seal with enclosed spring The seal is suitable for hygienic applications or those requiring compliance with -A Sanitary Standards. Fig. 7 O-ring shaft seal with enclosed spring p [bar] TM 9 Motor The standard motor is a totally enclosed, fan-cooled Baldor Washdown Duty motor. Options for non-washdown duty types, Premium Efficiency, Stainless Steel and alternative voltages are available. Design variations Grundfos offers FB models with or without feet and support bars. FB feet comply with current -A sanitary standards. Fig. 9 FB on foot-mounted motor TM t [ C] TM 97 9 Fig. FB with stainless steel feet and support bars TM 9 Fig. Operating range of O-ring shaft seal with enclosed spring : EPDM : EPDM and FKM. Quench seal All shaft seal types are available in quench design.

9 FB-ygia.book Page 9 Monday, June, : PM Certification Sanitary pumps FB Approvals and certificates The design, materials used and surface finish are subject to a variety of national and international rules and regulations, such as the A Sanitary Standards, the EEDG recommendations and the QD criteria. A Sanitary Standards Certificates Grundfos offers the following certificates and approvals for the FB models: ygienic design certificates. Certifies compliance with the A Sanitary Standards. Performance certificates. Test reports guaranteeing and certifying Q test data, power consumption, speed, curves, etc.) are available upon request. A Fig. A symbol The A Sanitary Standards for design and manufacture provide material specifications and requirements for surface finish. This ensures that dairy, food and other microbially sensitive products are protected from contamination and that all surfaces in contact with the products can be cleaned in place (CIP) or easily dismantled for manual cleaning. The A symbol is used by manufacturers to indicate compliance with the A Sanitary Standards. Initially Issued: //9 Authorization No.: This Is To Certify That Grundfos Pumps Mfg. Corp. 9 E. Shields Ave., Fresno, CA 977 Is hereby authorized to continue to apply the -A Symbol to the models of equipment, conforming to -A Sanitary Standards for: Centrifugal and Positive Rotary Pumps, Number: -, set forth below: Model Designations: FB / thru FB / in a series design in pipe sizes.,,., and inches. Valid through: December, 9 Timothy R. Rugh Executive Director, -A Sanitary Standards, Inc. ***** The issuance of this authorization for the use of the -A Symbol is based upon the voluntary certification, by the applicant for it, that the equipment listed above complies fully with the -A Sanitary Standards designated. Legal responsibility for compliance is solely that of the holder of this Certificate of Authorization, and -A Sanitary Standards, Inc. does not warrant that the holder of an authorization at all times complies with the provisions of the said -A Sanitary Standards. This in no way affects the responsibility of -A Sanitary Standards, Inc. to take appropriate action in such cases in which evidence of nonconformance has been established. R TM 9 9 Certificate Standard A hygienic design certificate A - Standard test report ISO 99 9

10 FB-ygia.book Page Monday, June, : PM Identification Sanitary pumps FB Type key FB/--ACAE-ASCE-FY-.-US Pump range Model name Impeller diameter (mm) Physical variations Connection type Materials Elastomer Type Rotating face material Stationary seat material Elastomer Leg / feet -A p Poles voltage Duty FB/--ACAE-ASCE-FY-.-US FB / A C A E A S C E F Y. U S /; /; /;/ /;7/; /; /; /;/ ; ; ; x; x; ; ; ; 7; 7; ; x; x9; 9; ; ; ; x; x Basic version (standard volute with o'clock discharge orientation and -A surface finish) A Special version (e.g. non-standard discharge orientation, surface finish, drain port, cart mounting, etc.) X Tri-Clamp C Internal NPT thread S ANSI flange G Other connections available on request. X Standard material (. stainless steel L) A Special material X EPDM E FKM V O-ring seal with enclosed spring (enclosed spring seal required for -A compliance) A O-ring seal with open spring driver (for non-sanitary applications) C Quench O-ring seal with enclosed spring (enclosed spring seal required for -A compliance) Q Quench O-ring seal with open spring driver (for non-sanitary applications) R Stainless steel S Other seal face materials available upon request. Silicon carbide Q Carbon C Other seal face materials available upon request. Silicon carbide Q EPDM E FKM V Stainless steel leg and foot assembly (-A compliant) F No feet X Complies with -A and carries label Y No -A label N ;.; ; ; ; 7.; ; ; ; ; / (USA) U 7 volt (Canada) C Other (e.g. V -phase) X Baldor Super E Washdown ( p has finned body) (CEWDM) E Baldor Premium Efficient (CEM) P Stainless steel motor S Other motors available on request X

11 FB-ygia.book Page Monday, June, : PM Installation Sanitary pumps FB Mechanical installation The pump should never be installed with the motor below the pump. TM 9 9 orizontal installation Pumps fitted with motors up to and including p require a " clearance behind the motor. Consult the motor manufacturer s instructions for details. Pumps fitted with motors of 7. p and up require a clearance behind and a ft clearance above the motor to allow the use of lifting equipment. Consult the motor manufacturer s instructions for details..7- p Fig. Installation The pumps must be installed in such a way that strain from the pipework is not transferred to the pump housing. Space requirements Vertical installation Pumps fitted with motors up to and including p require a clearance above the motor. Consult the motor manufacturer s instructions for details. Pumps fitted with motors of 7. p and up require at least a -feet clearance above the motor to allow the use of lifting equipment. Consult the motor manufacturer s instructions for details. 7.- p ft TM.7- p 7.- p Fig. orizontal installation " ft Fig. Vertical installation TM Elimination of noise and vibration In order to achieve optimum operation with minimum noise and vibration, consider vibration dampening of the pump. This is most important for pumps with motors above p. Smaller pumps may also cause undesirable noise and vibration. Noise and vibration are generated by the rotation in the motor and pump, by the flow in pipes and fittings and other equipment connected in the same or adjacent processes. The effect on the environment is subjective and depends on correct installation and the system design. The pipes should be anchored so that they do not stress the expansion joints and the pump. Follow the supplier s instructions and pass them on to advisers or pipe installers.

12 FB-ygia.book Page Monday, June, : PM Curve charts Sanitary pumps FB ow to read the pump curves FB / 7 rpm ISO 99 Annex A Pump type and speed of rotation. Q curve for the individual pump with a specific impeller diameter. % % 7 % % % The hydraulic efficiency curves are shown as dashed lines.9 %. %. % %. % % 7 % % % NPS.. P.. P Q [US GPM]. The NPS curve indicates the Net Positive Suction ead of the individual pump with a specific impeller diameter. The power curve indicates pump input power [P] for the individual pump with a specific impeller diameter Q [US GPM] Q [m³/h] TM 9 9

13 FB-ygia.book Page Monday, June, : PM Curve charts Sanitary pumps FB Curve conditions The guidelines below apply to the curves shown on the following pages:. Tolerances to ISO 99, Annex A.. p < P < p Flow rate: ± 9 % Total head: ± 7 % Efficiency: up to 7 %* * The efficiency of motor sizes below p are calculated on the basis of a formula stated in ISO 99. P > p Flow rate: ± % Total head: ± % Efficiency: %. Q curves of the individual pumps are shown with expected speed of a three-phase standard motor.. Measurements have been made with airless water at a temperature of + F.. The curves apply to a kinematic viscosity of υ =mm /s ( cst).. If the pumped liquid density and/or viscosity is higher than that of water, it may be necessary to use a motor with a higher performance.

14 FB-ygia.book Page Monday, June, : PM FB / / x / -pole, z FB /, / x /, -pole 7-9 % % %. % FB / rpm ISO 99 Annex A % % %. % % 7. % % 7. % 9. % % P P Q [US GPM] NPS Q [US GPM] Q [m³/h] TM 9 9

15 FB-ygia.book Page Monday, June, : PM FB / / x / -pole, z FB /, / x /, -pole -9 - % % % % FB / 7 rpm ISO 99 Annex A 7. %. %.9 % %. %. % % % % -9 - NPS P P 7 9 Q [US GPM] Q [US GPM] Q [m³/h] TM 9

16 FB-ygia.book Page Monday, June, : PM FB / / x / -pole, z FB /, / x /, -pole % % 9 % % FB / rpm ISO 99 Annex A. % 9 7. %. %. % % % 9 % P P 7 9 Q [US GPM] NPS 7 9 Q [US GPM] Q [m³/h] TM 9

17 FB-ygia.book Page 7 Monday, June, : PM FB / / x / -pole, z FB /, / x /, -pole FB / 7 rpm ISO 99 Annex A 7 % % % 7 % %. %.7 % 7. %. % 7 % % 7 % % % NPS P P Q [US GPM] Q [US GPM] Q [m³/h] TM

18 FB-ygia.book Page Monday, June, : PM FB / x -pole, z FB /, x, -pole -9-7 % % %. % % %. % 7 %. % % %. % FB / rpm ISO 99 Annex A. % -9 - NPS P P 7 9 Q [US GPM] Q [US GPM] Q [m³/h] TM 9

19 FB-ygia.book Page 9 Monday, June, : PM FB / x -pole, z FB /, x, -pole -9-7 % % % % 7 % %. % % FB / 7 rpm ISO 99 Annex A %. % %. %. %. % % 7 % % % % P P. - Q [US GPM] -9-9 NPS Q [US GPM] Q [m³/h] TM 9 9

20 FB-ygia.book Page Monday, June, : PM FB / x -pole, z FB /, x, -pole 7 % % % % FB / rpm ISO 99 Annex A %. % P 7 P. %.9 % Q [US GPM] % % % 7 % NPS Q [US GPM] Q [m³/h] TM 9 9

21 FB-ygia.book Page Monday, June, : PM FB / x -pole, z FB /, x, -pole FB / 7 rpm ISO 99 Annex A % % 7 % % %.9 %. %. % %. % % 7 % % % NPS.. P P 7 9 Q [US GPM] Q [US GPM] Q [m³/h] TM 9 9

22 FB-ygia.book Page Monday, June, : PM FB - / x / -pole, z FB /, / x /, -pole - - % % 9. % % % %. %. % FB / rpm ISO 99 Annex A 9 %. %.9 % %.7 % NPS P P Q [US GPM] Q [US GPM] Q [m³/h] TM 9

23 FB-ygia.book Page Monday, June, : PM FB / / x / -pole, z FB /, / x /, -pole % % % %.7 % 7. %. % 7.9 % 7.9 % % % FB / 7 rpm ISO 99 Annex A % 7 %. % NPS P P Q [US GPM] Q [US GPM] Q [m³/h] TM 9

24 FB-ygia.book Page Monday, June, : PM FB 7/ / x / -pole, z FB 7/, / x /, -pole % 9 % % % %. %.7 %. %. %. % 9. % 9 % FB 7/ rpm ISO 99 Annex A % % P P - 9- Q [US GPM] NPS Q [US GPM] Q [m³/h] TM 9

25 FB-ygia.book Page Monday, June, : PM FB 7/ / x / -pole, z FB 7/, / x /, -pole % 9 % 7 % % 7 % 9 % FB 7/ 7 rpm ISO 99 Annex A. % P P %. %.9 % 9.7 % 9.7 % Q [US GPM] 9 % 7 % % % 9 7 % % NPS Q [US GPM] Q [m³/h] TM 9

26 FB-ygia.book Page Monday, June, : PM FB / x -pole, z FB /, x, -pole % % % %. % FB / rpm ISO 99 Annex A 9 %. % %.7 % % 9. %. % NPS 9 P P Q [US GPM] 9 Q [US GPM] Q [m³/h] TM 7 9

27 FB-ygia.book Page 7 Monday, June, : PM FB / x -pole, z FB /, x, -pole % % 7 % 7 % 77 % FB / 7 rpm ISO 99 Annex A 7 9. % 77. % 7. % 7. %.9 % % % NPS 9 P P 7 Q [US GPM] 9 Q [US GPM] Q [m³/h] TM 9 7

28 FB-ygia.book Page Monday, June, : PM FB / x -pole, z FB /, x, -pole 9 % % 7 % 7 % 7. % FB / rpm ISO 99 Annex A % - 7 % 7 % 79 % % % % 7. % 7 % P P 9 % -.7 % % 79 % % 7 % % 7 % % Q [US GPM] 9. % 7 % NPS 7 - Q [US GPM] Q [m³/h] TM 9

29 FB-ygia.book Page 9 Monday, June, : PM FB / x -pole, z FB /, x, -pole P P % % % % % -.9 %. %. %. %.9 %. % FB / 7 rpm ISO 99 Annex A Q [US GPM] % 9 % 7 % % % NPS Q [US GPM] Q [m³/h] TM 9 9

30 FB-ygia.book Page Monday, June, : PM FB / x -pole, z FB /, x, -pole FB / rpm ISO 99 Annex A 9 % % %. % % 7. % %. % %. % NPS 9 P P Q [US GPM] 9 Q [US GPM] Q [m³/h] TM 9 9

31 FB-ygia.book Page Monday, June, : PM FB / x -pole, z FB /, x, -pole FB / 7 rpm ISO 99 Annex A 7 9 % % 9 % 7.9 % 9. % 7. %. % 9 % % % NPS 9 P P Q [US GPM] 9 Q [US GPM] Q [m³/h] TM 9

32 FB-ygia.book Page Monday, June, : PM FB / x -pole, z FB /, x, -pole P P % 7 % % % 7.9 %. % -. % FB / rpm ISO 99 Annex A Q [US GPM] 9. %. %. % 7 % - 7 % NPS Q [US GPM] Q [m³/h] TM 7 9

33 FB-ygia.book Page Monday, June, : PM FB / x -pole, z FB /, x, -pole 9 % % 9- % % 9 % % FB / 7 rpm ISO 99 Annex A 7.7 %. % - 9. % 9.9 %. % 9.7 % % 9 % % % P P - Q [US GPM] 9 % 9 NPS Q [US GPM] Q [m³/h] TM 9

34 FB-ygia.book Page Monday, June, : PM Dimensions Pump on foot-mounted motor FB pump on foot-mounted motor Models /, /, /, / TM 9 Pump dimensions P [p] No. of motor poles NEMA frame size Motor TEFC C-Face (Baldor Premium Efficient Washdown CEWDM) Dimensions [inch (mm)] n n a u k m ms ml s h. TCZ /. TCZ / 7 / / (). TCZ (9) (9) (). TCZ 7/. TCZ (7) 7. TCZ 9 / () / () / (7) () / () / () / () / () () / () / () / () / (.) 7 (7) / () / () Pipe connection dimensions Dimensions depend on housing size (DNs, DNd, a, h, e). Connections Pump model OD (DNs/DNd) FB /, FB / FB /, FB / ½ / ½ / Dimensions [inch (mm)] Tri-Clamp e / () (7) a / () (7) h 7 / () 7 / () Flange a 7/ (7) / () ANSI B. e / () (7) lbs h / (7) / (7) NPT thread Internal a / () () e / () (7) h / (7) / (7)

35 FB-ygia.book Page Monday, June, : PM Dimensions Pump on foot-mounted motor FB pump on foot-mounted motor Models /, 7/, /, /, /, / TM 9 Pump dimensions P [p] No. of motor poles NEMA frame size. TCZ. TCZ. TCZ. TCZ. TCZ 7. TCZ TCZ TCZ TCZ TSCZ Motor TEFC C-Face (Baldor Premium Efficient Washdown CEWDM) Dimensions [inch (mm)] n n a u k m ms ml s h / (9) 9 / () / () / () 7 / (9) / () () (79) / (9) / () 7/ (7) () / () 7/ (7) () 9.7 (7) / () / () / () / () / () / () (7) 9 / (9). () () / () / () / () / () / () 9 / () / () 7 (7) / (.) () 7/ (.) (79) / () / () / (9) 7(7) Pipe connection dimensions Dimensions depend on housing size (DNs, DNd, a, h, e). Connections Pump model OD (DNs/DNd) FB /, FB 7/ FB /, FB / FB /, FB / ½ / ½ / / Dimensions [inch (mm)] Tri-Clamp e 7/ (9) / () / () a / () / () / () h / () / (7) / () Flange a / () / () / () ANSI B. e 7/ (9) / () / () lbs h 7 7/ () 7 7/ () 7 7/ () NPT thread, internal a / () / () / () e 7/ (9) / () / () h 9 / (7) 9 / () 9 / ()

36 FB-ygia.book Page Monday, June, : PM Dimensions Pump with feet and support bars FB pump with feet and support bars Models /, /, /, / TM 9 Pump dimensions P [p] No. of motor poles NEMA frame size. TCZ /. TCZ 7 / 7 / (). TCZ (9) (9). TCZ 7/. TCZ (7) 7. TCZ ) Adjustable feet: +9/, / (+, ) Motor TEFC C-Face (Baldor Premium Efficient Washdown CEWDM) Dimensions [inch (mm)] n a u k m m h / () 7 / (9) () / () / () / () () () () () 7/ (7) 9 / () Pipe connection dimensions Dimensions depend on housing size (DNs, DNd, a, h, e). Connections Pump model OD (DNs/DNd) FB /, FB / FB /, FB / ½ / ½ / Dimensions [inch (mm)] Tri-Clamp e / () (7) a / () (7) h 7 / () 7 / () Flange a 7/ (7) / () ANSI B. e / () (7) lbs h / (7) / (7) NPT thread, internal a / () () e / () (7) h / (7) / (7)

37 FB-ygia.book Page 7 Monday, June, : PM Dimensions Pump with feet and support bars FB pump with feet and support bars Models /, 7/, /, /, /, / TM 9 Pump dimensions P [p] No. of motor poles NEMA frame size. TCZ. TCZ. TCZ. TCZ. TCZ 7. TCZ TCZ TCZ TCZ TSCZ ) Adjustable feet: +9/, / (+, ) Motor TEFC C-Face (Baldor Premium Efficient Washdown CEWDM) Dimensions [inch (mm)] n a u k m m h 7 / (9) / () () (79) / () 7/ () 9 7/ () 9 (9) / () 7/ (7) () 9 / (7) / () / () / () / () () / () () (7) 9 / (9). () 7 () 9 () () () () 7 () 9 / () 9 / () 7/ (7) / (9) Pipe connection dimensions Dimensions depend on housing size (DNs, DNd, a, h, e). Connections Pump model OD (DNs/DNd) FB /, FB 7/ FB /, FB / FB /, FB / ½ / ½ / / Dimensions [inch (mm)] Tri-Clamp e 7/ (9) / () / () a / () / () / () h / () / (7) / () Flange a / () / () / () ANSI B. e 7/ (9) / () / () lbs h 7 7/ () 7 7/ () 7 7/ () NPT thread, internal a / () / () / () e 7/ (9) / () / () h 9 / (7) 9 / () 9 / () 7

38 FB-ygia.book Page Monday, June, : PM

39 FB-ygia.book Page 9 Monday, June, : PM 9

40 FB-ygia.book Page Monday, June, : PM Being responsible is our foundation Thinking ahead makes it possible Innovation is the essence L-FB-PG- 7 Repl. /9 9, Grundfos Pumps Corp. US Subject to alterations. The name Grundfos, the Grundfos logo, and the payoff Be Think Innovate are registered trademarks owned by Grundfos Management A/S or Grundfos A/S, Denmark. All rights reserved worldwide. GRUNDFOS Pumps Corporation 7 West th Terrace Olathe, Kansas Phone: Telefax: GRUNDFOS Canada Inc. 9 Brighton Road Oakville, Ontario L C9 Canada Phone: Telefax: Bombas GRUNDFOS de Mexico S.A. de C.V. Boulevard TLC No. Parque Industrial Stiva Aeropuerto Apodaca, N.L. Mexico Phone: +-- Telefax: +--

CR, CRN high pressure

GRUNDFOS PRODUCT GUIDE CR, CRN high pressure Vertical multistage centrifugal pumps 6 z Contents Mission 3 Product overview Performance range Product range 5 Applications 6 CRNE 1 and 3 S 7 CRN 5, 1, 15,