Single-Core PVC 6491X

Transcription

1 Single-Core PVC X 0/0 V Application PVC insulated only cable for fixed wiring purposes. Used in trunking or conduit, or may be surface mounted when used for earthing. Specifications In accordance with BS EN 0-- and Cenelec Harmonised codes - H0V-U (solid conductor) H0V-R (stranded conductor) Conductors: Solid Class or Stranded Class copper conductors to BS EN 0 Insulation: PVC Insulation Type TI. to BS EN 0- Flame retardant to BS EN 0-- Normal colours available: green/yellow, blue, black, brown and grey Other colours available if required Temperature Rating: 0 C maximum conductor operating temperature Voltage Rating: 0/0 V 0 0 anixter.com

2 Anixter Number Cenelec Code Nominal Conductor Area mm -XX = colour, -0 = black, -0 = blue, -0 = brown, -0 = grey, -0 = green/yellow. Other colours available upon request. All dimensions are nominal unless otherwise stated. For further technical information see page :. For conductor short-circuit ratings see page :. Conductor Class Insulation Thickness mm Single-Core PVC X 0/0 V Maximum O/D mm Approx Weight kg/km A-A0-00-XX H0V-U. 0.. A-A0-00-XX H0V-R. 0.. A-A0-00-XX H0V-U. 0.. A-A-00-XX H0V-R A-A0-000-XX H0V-R 0.. A-A0-000-XX H0V-R 0.. A-A0-00-XX H0V-R.0. 0 A-A0-00-XX H0V-R.0. 0 A-A0-00-XX H0V-R.. 0 A-A0-00-XX H0V-R A-A-000-XX H0V-R A-A-000-XX H0V-R A-A-00-XX H0V-R A-A-00-XX H0V-R A-A-00-XX H0V-R A-A-0-XX H0V-R A-A-00-XX H0V-R A-A-000-XX H0V-R A-A-000-XX H0V-R A-A-000-XX H0V-R A-A-00-XX H0V-R Min Bending Radius (fixed bend) mm 0

3 Single-core PVC Single-core PVC/PVC (00/00 V) Single-core PVC/PVC (Y Types - 00/00 V) Single-core PVC/PVC (Y Types - 0/0 V) CURRENT - CARRYING CAPACITY (Amperes): Conductor Cross Sectional Area Reference Method A (enclosed in conduit in thermally insulating wall etc) Cables, Single Phase a.c. or d.c. or Cables Reference Method B (enclosed in conduit on a wall or in trunking etc) Cables, Single Phase a.c. or d.c. or Cables Reference Method C ( clipped direct ) Cables, Single Phase a.c. or d.c. Flat and Touching or Cables Flat and Touching or Trefoil mm A A A A A A

4 If cables are to be used in ambient air temperatures other than 0 C the following rating factors should be applied: Ambient air temp C Rating factor Reference Method F (in free air or on perforated cable tray horizontal or vertical) Cables, Single Phase a.c. or d.c. flat and Touching or Cables Three Phase a.c. Flat and Touching Reference Method F (in free air or on perforated cable tray horizontal, vertical or trefoil) Horizontal Flat Spaced Vertical Flat Spaced Trefoil Cables, Single Phase a.c. or d.c. or Cables Cables, Single Phase a.c. or d.c. or Cables Three Phase a.c. A A A A A Cables Trefoil 0

5 Single-core PVC Single-core PVC/PVC (00/00 V) Single-core PVC/PVC (Y Types - 00/00 V) Single-core PVC/PVC (Y Types - 0/0 V) VOLTAGE DROP (per Ampere per metre): Conductor Cross Sectional Area cables d.c. Reference Methods A & B (enclosed in conduit etc in or on a wall) Cables - Single Phase a.c. Reference Methods C & F (clipped direct or on trays, touching) Reference Method C & F (spaced*) mm mv mv mv mv r x z r x z r x z

6 or Cables - Reference Methods A & B (enclosed in conduit etc in or on wall) Reference Methods C & F (in trefoil) Reference Methods C & F (flat touching) Reference Methods C & F (flat spaced*) mv mv mv mv r x z r x z r x z r x z For further guidance refer to the BS (IEE Wiring Regulations - latest edition). * spaced by one cable diameter. 0

7 Short-Circuit Ratings Additional Conductor Short-Circuit Ratings PVC Insulated Cables Conductor Size mm 0.s duration ka.0s duration ka s duration ka N.B: The above ratings assume an adiabatic temperature rise and are based on a conductor temperature of 0 C at start of short-circuit and 0/0 C* at end of short-circuit. * 0 C cables up to and including 00mm * 0 C cables above 00mm