Shutter/Blind Controls
|
|
- Antonia Lloyd
- 5 years ago
- Views:
Transcription
1 /2 Inserts /5 /11 Accessories and spare parts /1
2 Siemens AG 2007 Inserts Selection and ordering data 5TA2 154 (front view) General information Non-insulated parts of inserts covered by molded plastic Self-retracting claws The screwless terminals are connecting terminals for Cu and aluminum conductors For extension claws, see... Functions / Switching/ Pushbutton Control/ Dimming / Accessories and spare parts 11/18 Shutter/blind, with electrical and mechanical interlock } 5TA / Tops, see section Page (ff.) Design / DELTA ambiente / Shutter/blind controls 8/11 Design / i-system / Shutter/blind controls 4/21 Design / DELTA natur / Shutter/blind controls 7/10 Design / DELTA profil / Shutter/blind controls 5/16 Design / DELTA style / Shutter/blind controls 6/ 19/44 / Shutter/blind with electrical and mechanical interlock 5TA2 154 (rear view) 5TA2 114 (front view) Shutter/blind pushbuttons, with electrical interlock } 5TA / Tops, see section Design / DELTA ambiente / Shutter/blind controls 8/11 Design / i-system / Shutter/blind controls 4/21 Design / DELTA natur / Shutter/blind controls 7/10 Design / DELTA profil / Shutter/blind controls 5/16 Design / DELTA style / Shutter/blind controls 6/ Page (ff.) / Shutter/blind pushbuttons, with electrical interlock 19/44 5TA2 114 (rear view) /2
3 Inserts 5TC TC1 270 sys shutter/blind control inserts For controlling a shutter/blind motor with mechanical or electronic limit Flush-mounting devices Operation is by means of sys shutter/blind pushbuttons and UP 211 wave shutter/blind pushbuttons (radio) Product features 2 relays which are interlocked against each other with a minimum switchover time of 1 s Group and central controls through combination of several sys shutter/blind control inserts The "wind alarm" safety function can be implemented through the UP secondary input Multiphase operation possible (i.e. different phases at the main and secondary branches) Bridging of voltage interruptions less than 0.2 s Conventional shutter/blind pushbutton (5TA2 114) or switch (5TA2 154) can be connected over secondary inputs Number of extension units: unlimited Rated voltage: 230 V AC, 50 Hz (neutral conductor required) Connected load: max. 1 motor up to 1000 VA Tops, see section Page (ff.) Design / i-system / Shutter/blind controls 4/21 Design / DELTA profil / Shutter/blind controls 5/16 Design / DELTA style / Shutter/blind controls 6/ 19/48 / sys shutter/blind control inserts Shutter/blind control flush-mounting isolating relays Double, with individual control Relay for the control of several shutters or blinds Two motors can be controlled per isolating relay, even if further isolating relays are connected downstream Option for individual control of connected motors over shutter/blind pushbutton (e.g. 5TA2 114) In order to ensure a sufficient degree of protection, the isolating relay must be installed in a surface-mounting or flush-mounting box Technical specifications Rated voltage 230 V/50 Hz ±10 % Relay switching voltage max. 250 V Relay switching capacity max. 8 A (AC1), 3 A (ind.) Control voltage 230 V AC ±10 % Relay power consumption 10 ma Temperature range C Terminals max. 2.5 mm 2 Dimensions 58 mm x 59 mm x 22 mm Weight approx. 75 g Installation flush-mounting box from 70 mm Ø, 4 mm deep or surface-mounting box 100 mm x 100 mm Interlock to prevent simultaneous actuation of central and individual control Priority switching of the central command The switchover time between an UP and DOWN command must be at least 0.5 sec Only for in-phase operation For further technical information, see... Technical Information / / Flush-mounting isolating relays for shutter/ blind controls 19/55 PU PS*/ } 5TC } 5TC /3
4 Siemens AG 2007 Inserts 5TC1 271 Shutter/blind control flush-mounting isolating relays, compact Relay for the control of several shutters or blinds A maximum of two motors can be connected per compact isolating relay, whereby the drive connected to the marked motor terminals can also be individually controlled over a shutter/blind pushbutton If cascaded, a motor can be connected to each compact isolating relay, which can also be individually controlled over a shutter/blind pushbutton In order to ensure a sufficient degree of protection, the isolating relay must be installed in a surface-mounting or flush-mounting box Technical specifications Rated voltage 230 V/50 Hz ±10 % Relay switching capacity max. 8 A (AC1), 3 A (ind.) Control voltage 230 V/50 Hz ±10 % Relay power consumption 10 ma Temperature range C Terminals max. 2.5 mm² Dimensions 50 mm x 53 mm x 22 mm Weight approx. 60 g Installation flush-mounting box from 60 mm Ø, 40 mm deep or surface-mounting box 75 mm x 75 mm x 37 mm Interlock to prevent simultaneous actuation of central and individual control Priority switching of the central command The switchover time between an UP and DOWN command must be at least 0.5 sec Only for in-phase operation For further technical information, see... Technical Information / / Compact flush-mounting isolating relays for shutter/ blind control 19/56 PU PS*/ } 5TC /4
5 Selection and ordering data 5TA TA TA7 662 Shutter/blind knob-operated with Up/Down symbols Momentary-contact and maintained-contact position to left and right and neutral position titanium white (similar to RAL 9010) } 5TA electrical white (RAL 10) } 5TA pole (changeover contacts with neutral position) titanium white (similar to RAL 9010) } 5TA electrical white (RAL 10) } 5TA / Shutter/blind knob-operated 19/45 Shutter/blind knob-operated, with "Down/Up" label Momentary-contact position to left and right and neutral position Titanium white (similar to RAL 9010) } 5TA Electrical white (RAL 10) } 5TA /45 / Shutter/blind knob-operated Shutter/blind key-operated with Up/Down symbols With safety lock and 2 keys Identical key type Momentary-contact and maintained-contact position to left and right and neutral position Titanium white (similar to RAL 9010) } 5TA Electrical white (RAL 10) } 5TA /45 / Shutter/blind key-operated /5
6 Siemens AG TA7 650 Shutter/blind key-operated with key symbol In DELTA fläche IP44 design Degree of protection IP44 and splash-proof With Up/Down symbols (under the hinged lid) to DIN Enclosures made of high-impact molded plastic Size of cover: 66 mm x 75 mm Cable entry: slide nipples for cables with mm Ø With two keys Identical key type (different locking systems on request) Momentary-contact and maintained-contact position to left and right } 5TA Momentary-contact position to left and right } 5TA / Shutter/blind key-operated 19/45 Shutter/blind pushbuttons, with electrical interlock, with Up/Down symbols } 5TD / In DELTA fläche IP44 design Screwless terminals Terminal assignment same as for 5TA2 114 flush-mounting insert 19/44 / Shutter/blind pushbuttons, with electrical interlock 5TD TA7 666 Shutter/blind key-operated for master-key systems, with Up/Down symbols, momentary-contact position to left and right titanium white (similar to RAL 9010) } 5TA electrical white (RAL 10) } 5TA pole (changeover contacts with neutral position) titanium white (similar to RAL 9010) } 5TA electrical white (RAL 10) } 5TA TG4 225 profile semicylinder must be ordered separately } 5TG / / Shutter/ blind key-operated, for master-key systems 19/46 /6
7 5TA TA TA7 682 Shutter/blind key-operated for master-key systems, with Up/Down symbols, momentary-contact and maintained-contact position to left and right titanium white (similar to RAL 9010) } 5TA electrical white (RAL 10) } 5TA pole (changeover contacts with neutral position) titanium white (similar to RAL 9010) } 5TA electrical white (RAL 10) } 5TA TG4 225 profile semicylinder must be ordered separately } 5TG / / Shutter/ blind key-operated, for master-key systems 19/46 Shutter/blind key-operated for master-key systems, with Up/Down symbols, maintained-contact position to left and right 1-pole, changeover contact with neutral position, key can only be withdrawn in neutral position titanium white (similar to RAL 9010) } 5TA electrical white (RAL 10) } 5TA pole, changeover contacts without neutral position, key can be withdrawn in both maintained-contact positions titanium white (similar to RAL 9010) } 5TA electrical white (RAL 10) } 5TA TG4 225 profile semicylinder must } 5TG / be ordered separately 19/46 / Shutter/ blind key-operated, for master-key systems Shutter/blind key-operated for master-key systems, with Up/Down symbols In DELTA profil design Titanium white (similar to RAL 9010) Momentary-contact and maintained-contact position to left and right } 5TA Maintained-contact position to left and right } 5TA Momentary-contact position to left and right } 5TA TG4 225 profile semicylinder must } 5TG / be ordered separately 19/46 / Shutter/ blind key-operated, for master-key systems /7
8 Siemens AG TA7 685 Shutter/blind key-operated for master-key systems, with Up/Down symbols In DELTA style design Changeover contact with neutral position Titanium white (similar to RAL 9010) Momentary-contact and maintained-contact position to left and right } 5TA Maintained-contact position to left and right } 5TA Momentary-contact position to left and right } 5TA TG4 225 profile semicylinder must be ordered separately } 5TG / / Shutter/ blind key-operated, for master-key systems 19/46 Profile semicylinders for "shutter/blind key-operated for } 5TG / master-key systems" CES product With three keys of Identical key type 5TG4 225 /8
9 5TC1 520 Shutter/blind controls for use with the DELTA line, DELTA vita, DELTA miro, DELTA profil and DELTA style product ranges For controlling a blind or shutter motor with mechanical or electronic limit Operation is by means of 4 control buttons Titanium white (similar to RAL 9010) } 5TC Electrical white (RAL 10) } 5TC Aluminum metallic or silver (similar to RAL 9006) } 5TC Carbon metallic or anthracite (similar to RAL 7016) } 5TC Pearl gray (similar to RAL 7035) } 5TC Champagne (similar to RAL 7048) } 5TC Bronze (similar to RAL 3012) } 5TC For use with the DELTA profil product range, the following intermediate frames must be ordered separately: Titanium white (similar to RAL 9010) Design / DELTA profil / 5/8 } 5TG / Silver or aluminum metallic (similar to RAL 9006) Anthracite or carbon metallic (similar to RAL 7016) For use with the DELTA style product range, titanium white, an intermediate frame must be ordered separately, see... Design / DELTA profil / Design / DELTA profil / Design / DELTA style / Technical Specifications, see... Technical Information/ 19/50 / Product features Flush-mounting device without an extension unit input 230 V AC, 50 Hz (N conductor required) With screw and claw fixing Type of connection: screw-type terminals 2 relays which are electrically interlocked against each other with a minimum switchover time of approx. 1 s Bridging of voltage interruptions < 0.2 s Connected load: max. 1 motor up to 1000 W Pulse duration: approx. 2 min Accuracy: ± 1 min per month Reserve power: > 6 h Switching times: max. 4 (in 2 blocks: Mo... Fr / Sa... Su) Factory preset switching times for faster commissioning Possible reset to factory setting, manual operation is possible at any time 5/8 } 5TG / /8 } 5TG / /7 } 5TG / /9
10 Siemens AG TC1 521 Comfort shutter/blind controls for use with the DELTA line, DELTA vita, DELTA miro, DELTA profil and DELTA style product ranges For controlling a blind or shutter motor with mechanical or electronic limit and comprehensive functionality (see product features) Menu-controlled operation by means of 4 control buttons Titanium white (similar to RAL 9010) } 5TC Electrical white (RAL 10) } 5TC Aluminum metallic or silver (similar to RAL 9006) } 5TC Carbon metallic or anthracite (similar to RAL 7016) } 5TC Pearl gray (similar to RAL 7035) } 5TC Champagne (similar to RAL 7048) } 5TC Bronze (similar to RAL 3012) } 5TC The sun sensor must be ordered separately, see... For use with the DELTA profil product range, the following intermediate frames must be ordered separately: Design /i-system/accessories and spare parts Titanium white (similar to RAL 9010) Design /DELTA profil / Silver or aluminum metallic (similar to RAL 9006) Anthracite or carbon metallic (similar to RAL 7016) For use with the DELTA style product range, titanium white, an intermediate frame must be ordered separately, see... Design /DELTA profil / Design /DELTA profil / Design /DELTA style / 19/51 / Comfort shutter/blind control Product features Flush-mounting device without an extension unit input 230 V AC, 50 Hz (N conductor required) With screw and claw fixing Type of connection: screw-type terminals 2 relays which are electrically interlocked against each other with a minimum switchover time of approx. 1 s Bridging of voltage interruptions < 0.2 s Connected load: max. 1 motor up to 1000 W Pulse duration: 2 min factory setting, may be changed to as much as 12 min by configuration Accuracy: ± 1 min per month Reserve power: approx. 24 h Switching times: max. 18 (can be split up in three memories) Factory preset switching times for faster commissioning Possible reset to factory settings Random generator ± 15 min Astro program (can be delayed by ± 1 h 59 min) Easy changeover from summer to winter time Twilight and sun protection function is possible with an optional sun sensor The random and astro functions can be combined Manual operation possible at any time 4/42 } 5TC /8 } 5TG / /8 } 5TG / /8 } 5TG / /7 } 5TG / /10
11 Accessories and spare parts Selection and ordering data Sun sensors With 2-m connecting cable (extendable to 25 m) In combination with the Comfort shutter/blind control, the sun sensor can be used for sun protection and twilight functions } 5TC / Comfort shutter/blind control 19/51 5TC1 526 /11
DELTA style 6/1. 6/6 Introduction. 6/7 Frames. 6/8 Switches and pushbuttons. 6/14 Socket outlets. 6/16 International plug-and-socket devices
/ Introduction /7 Frames /8 Switches and pushbuttons /14 Socket outlets /1 International plug-and-socket devices /17 Shutter/blind controls /21 Lighting controls /24 Motion detectors /2 Room temperature
More informationSurface-Mounting Product Ranges
Introduction Overview Light signals SCHUKO socket outlets Two-circuit switches Garages, laundry rooms, laboratories and workshops are often exposed to a lot of heavy-duty activity, which includes the odd
More information584 5WG AB_1 DELTA
Product DELTA profil DELTA style DELTA ambiente Display and control unit 5WG1 585-2AB01 pearl grey 5WG1 585-2AB11 titanium white 5WG1 585-2AB21 anthracite 5WG1 585-2AB71 silver 5WG1 585-2AB11 titanium
More informationProduct and functional description
Product and functional description The RS 520/23 shutter / blind actuator is a KNX device with one relay output. The device is installed in an AP 118 Control Module Box or an AP 641 Room Control Box. The
More informationOpen/close controller for AC drives UMS 5 UMS U5 UMS 5P
/close controller for AC drives UMS 5 UMS U5 UMS 5P (rail mounting versions: 230V AC, 24V UC) (flush mounting version: 230V AC, 12-24V UC) (rail mounting version 230V AC, electrically isolated auxiliary
More information252F 5WG FB_1 DELTA
Product DELTA i-system DELTA profil Fan-Coil Unit Operator Panels Hotel titanium white 5WG1 237-2FB11 pearl grey 5WG1 252-2FB01 carbon metallic 5WG1 237-2FB21 titanium white 5WG1 252-2FB11 aluminum metallic
More informationPush button UP 287, 4 - fold
Product DELTA profil DELTA style Push button 1-fold pearl grey 5WG1 241-2AB01 titanium white 5WG1 285-2AB11 titanium white 5WG1 241-2AB11 basalt black 5WG1 285-2AB21 anthracite 5WG1 241-2AB21 titanium
More informationSwitches 6/1. 6/4 Introduction. 6/5 5TE8 control switches. 6/7 5TE4 8 pushbuttons. 6/9 5TE8 On/Off switches. 6/11 5TE1 switch disconnectors
6/4 Introduction 6/5 5TE8 control switches 6/7 5TE4 8 pushbuttons 6/9 5TE8 On/Off switches 4 6/11 5TE1 switch disconnectors 6 6/1 Switch to manual? Wherever electrical systems need to be switched on or
More information6173 AG GJB A0138
0073-1-6048 24661 ABB ibus EIB Combi actuator 6173 AG-101-500 GJB 000 6151 A0138 with 4-gang binary input for use as: 4-gang switching actuator 2x2-gang shutter actuator 2-gang switching-/1x2-fach-shutter
More informationProduct and Applications Description. Application Programs. Note. instabus EIB Technical Product Information. June 2005
Product and Applications Description Application Programs The application programs of the dimmer UP 525/01 consist of two elements: the actuating and the sensor program element. The tasks actuating program
More informationDELTA i-system wall switch single UP 221/2 5WG AB_2
DELTA i-system wall switch single UP 221/2 5WG1 221-2AB_2 UP 221/3,with status LED 5WG1 221-2AB_3 wall switch double UP 222/2, 5WG1 222-2AB_2 UP 222/3,with status LED 5WG1 222-2AB_3 wall switch triple
More informationProduct and Applications Description. Note. Example of Operation. Installation Instructions. Application Programs WARNING
Product and Applications Description Note If the application program is not loaded completely by the ETS, you had better interrupt the 24 V voltage supply of the I/O-module during the loading interval.
More informationinstabus EIB System Actuator
Product name: 4-channel blind/shutter actuator with manual control, 230 V Design: Modular rail-mounting device Item no.: 1048 00 ETS search path: shutter / shutter / shutter/blind actuator 4-gang 230V
More informationKNX/EIB Intelligent Installation Systems
K-BUS R Shutter Actuator, 4fold User manual-ver. 1 AWBS-04/00.1 KNX/EIB Intelligent Installation Systems Conents 1. General ---------------------------------------------------------------------------------------------------------------------
More informationK-BUS Shutter Actuator. User manual-ver. 1
Guangzhou Video-Star Eletronnics Co.,Ltd. K-BUS Shutter Actuator User manual-ver. 1 AWBS-04/00.1 Intelligent Installation Systems http://www.video-star.com.cn Conents 1. General ---------------------------------------------------------------------------------------------------------------------
More informationProduct and functional description
Product and functional description The RS 525/23 Universal Dimmer is a KNX device with one dimmer output. The device is installed in an AP 118 Control Module Box or an AP 641 Room Control Box. The bus
More informationProduct and Applications Description. Example of Operation. Installation Instructions WARNING. Note. Application Programs
Product and Applications Description Example of Operation dimmer UP 525/11 load circuit AC 230 V L1 N The dimmer UP 525/11 is a dimming actuator for mounting in box mounts (a.o. 60 mm Ø, 60 mm depth).
More informationProduct and functional description
Product and functional description The UP 525/13 Universal Dimmer is a KNX device with one dimmer output. The device is installed in a flushmount wall box (60 mm Ø, depth 60 mm) or an installation box.
More informationMylinc mechanisms switches and accessories Mylinc mechanisms dimmers and fan regulators 6755 01 6755 03 6755 95 6755 35 6755 30 6755 31 6755 40 6755 26 6755 97 6759 75 6759 69 Switches are ISI marked as
More informationABB i-bus EIB. Shutter Actuator, 2-fold, 6 A, 230 VAC, MDRC JA/S 2.6.1, GH Q R0111
, GH Q31 0022 R0111 The 2-fold shutter actuator is a DIN rail mounted device for insertion in the distribution board. It is connected to the EIB via a bus connecting terminal. It is used to control two
More informationProduct and function description
GAMMA instabus The following display and operating functions can be configured: switching, switching with forced control, dimming, sun protection control, recall and save scenes, sending and displaying
More information5.1. Motor Protection and Monitoring. Contents. Product Overview. Monitoring Relays. D64R Series Digital Ground Fault Relays...
.1 Ground Fault Relays and Monitors Contents Description Current.................. Phase................... Voltage.................. Ground Fault Relays and Monitors D64R Series Digital Ground Fault Relays....
More informationRoom Temperature Controller
3 023 Room Temperature Controller for four-pipe fan coil units RCC30 Outputs for on / off valve actuators Outputs for three-speed fan Control depending on room or return air temperature Operating modes:
More informationSiemens Spares. RL 513D23 Switching actuator (relay), 3 x 6A. Technical Product Information
Gamma instabus Technical Product Information RL 513D23 Switching actuator (relay), 3 x 6A 5WG1 513-4DB23 Switching actuator for independent switching of three lighting luminaire groups or other loads one
More informationDELTA profil wall switch, single UP 241/2 5WG AB_2
UP 241/2 5WG1 241-2AB_2 UP 241/3,with status LED 5WG1 241-2AB_3 UP 243/2 5WG1 243-2AB_2 UP 243/3,with status LED 5WG1 243-2AB_3 UP 245/2 5WG1 245-2AB_2 UP 245/3,with status LED 5WG1 245-2AB_3 UP 245/4,with
More informationHeating Circuit Controller
2 706 Synco living Heating Circuit Controller RRV918 RF-controlled heating circuit controller for up to 8 heating circuits RF communication based on KNX standard (868 MHz, bidirectional) Connection facility
More informationABB i-bus EIB / KNX Shutter Actuator with Manual Operation, 4-fold, SMI, MDRC JA/S 4.SMI.1M. Product Manual. Intelligent Installation Systems ABB
Product Manual ABB i-bus EIB / KNX Shutter Actuator with Manual Operation, 4-fold, SMI, MDRC JA/S 4.SMI.1M Intelligent Installation Systems ABB JA/S 4.SMI.1M Shutter Actuator with Manual Operation, 4-fold,
More informationRoom Temperature Controllers
3 021 Room Temperature Controllers for two-pipe fan coil units RCC10 Output for on / off valve actuator Outputs for three-speed fan Control depending on the room or return air temperature (RCC10) Automatic
More informationA1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 Controls:
Product name: Switching actuator 16fold / blind/shutter actuator 8fold Design: DIN rail mounting device Item no.: 1029 00 ETS search path: Gira Giersiepen / output / Binary output mix / switching act.
More informationProduct and Applications Description. Application Programs. Example of Operation. Installation Instructions. load circuit AC 230/400V L1 L2 L3 N
Product and Applications Description Application Programs 20 A4 Binary 906401 4 binary outputs 1 status request available for each output 1 relation can be set allows 1 positive drive for each output initial
More informationOverview of types. Technical data
echnical data sheet SH2A-MF.. Multifunctional linear actuators for adjusting air dampers and slide valves in ventilation and air-conditioning systems for building services installations For air control
More informationChorus Home Automation KNX - Easy BUS
Chorus KNX - Easy BUS KNX Easy protocol BUS system, according to EN50090 European Standard for Home Automation. Simplified programming that does not require a PC. Portable solution, thanks to the wireless
More informationIndicator, round, raised, full face with plastic matt chrome bezel, 22.5 mm mounting, lamp block included. Yellow Green
22.5 mm 3.5 mm IP65 1 A 66 VAC Choose one component from each of the coloured sections to assemble a complete switch. For other options or further information please contact your local sales office. INDICATOR
More informationSupplementary operating instructions for your air curtain system Controller TMC 500
Supplementary operating instructions for your air curtain system Controller TMC 500 (Translation of the original) Serial number: Year: Please quote this number when contacting customer service! Date 08.04.2016
More informationMODULES FOR SAFETY AND MONITORING
MODULES FOR SAFETY AND MONITORING Woertz AG Hofackerstrasse 47, P.O. Box 948, CH-43 Muttenz, Switzerland Tel. ++4 6 / 466 33 33, Fax ++4 6 / 46 96 06 http://www.woertz.ch Woertz-USA 5 Discovery Drive,
More informationTechnische Daten: instabus EIB supply instabus line: YY 6 x 0.6 mm; red: bus (+) / black: bus (-)
Product designation: shutter/blind actuator 1fold FM Design: FM (flush-mounted type) Article no.: 1047 00 ETS search path: Gira Giersiepen / shutter / shutter / shutter/blind actuator 1fold FM Functional
More informationKNX/EIB KNX Blind actuator. 1 Safety instructions. 2 Device components. Blind actuator 4-gang 24 V DC Order-No. :
Blind actuator 4-gang 24 V DC Order-No. : 2154 00 Blind actuator 4-gang 230 V AC Order-No. : 2160 00 Blind actuator 2-gang 230 V AC Order-No. : 2152 00 Blind actuator 4-gang 230 V AC Order-No. : 1039 00
More informationStructure of the device. Push-button sensor module. Ref.-no.: 4008 TSM Safety instructions
Push-button sensor module Ref.-no.: 4008 TSM Safety instructions Caution! Electrical devices may only be installed and fitted by electrically skilled persons. Non-compliance with the installation information
More informationMulti Voltage Options. Multi Voltage Options 110VAC + 24VAC/DC 230VAC + 24VAC/DC 24VAC/DC 110VAC 230VAC
DIN Timers TD 22.5mm DIN rail mounting Electronic Timers AC/DC coil operation Multi-time range Multi-function, On-delay, Off-delay and Star/Delta versions Voltage range selectable Marking plate cover Y
More informationProduct and Application Description
Technical Product - Information Product and Application Description The room temperature controller UP 237K and UP 252K are available in the following colors, matching the design of the wall switch design
More informationActuator FD61. Product Data Sheet Feature. Option
Product Data Sheet www.moteck.com FD61 FD61 is a quiet and powerful actuator designed for use in furniture application. Compared to FD6, the motor size of FD61 is more compact. There are several models
More informationSemi Flush-mount Room Temperature Controllers with LCD
3 076 RDF300, RDF300.02, RDF340 RDF400.01 Semi Flush-mount Room Temperature Controllers with LCD for 2-pipe, 2-pipe with el. heater and 4-pipe fan coil units for use with compressors in DX type equipment
More informationSee «Overview of types» 90 s / 60 mm 150 s / 100 mm Manuelle Auslösung der Adaption durch Drücken der Taste «Adaption» oder mit dem PC-Tool
echnical data sheet LHA-MF..-P Multifunctional linear actuators for adjusting air dampers and slide valves in ventilation and air-conditioning systems for building services installations For air control
More informationHERZ Actuator 7708, 7990
HERZ Actuator 7708, 7990 Data sheet for 7708, 7990 Issue 1116 Dimensions Dimensions Installation height Dimensions Installation height Dimensions Installation height Page 1 Models HERZ Actuator 2-point,
More informationPlexo IP 55/IP 66. Makes your day, rain or shine PLEXO / WEATHERPROOF PRODUCT GUIDE. For reference only.
Plexo IP 55/IP 66 Makes your day, rain or shine PLEXO / WEATHERPROOF PRODUCT GUIDE www.legrand.com.sg Plexo IP 55 Ingenious features for easy installation >> Time saving guaranteed: no cut-out Uncut pierceable
More information1/2 Introduction. SIMBOX LC 1/7 Introduction 1/8 Flush-mounting and surfacemounting. 1/9 Dimensional drawings
Siemens AG 200 ALPHA SIMBOX Small Distribution Boards /2 Introduction /2 Introduction /3 Flush-mounting and hollow-wall distribution boards /4 Hood-type distribution boards /5 Accessories /6 Dimensional
More informationPower supply module, bus connection module
s 8 183 8183p01, p02 TX-I/O Power supply module, bus connection module TXS1.12F10 TXS1.EF10 Each I/O row begins with one of these devices TXS1.12F10 power supply module Up to 4 power supply modules can
More informationHeating Circuit Controller
2 705 Synco 900 Heating Circuit Controller RRV912 RF-controlled heating circuit controller for up to 2 heating circuits RF communication based on KNX standard (868 MHz, bidirectional) Connection facility
More informationSiemens AG The worldwide standard for home and building control. GAMMA Building Control. Product Catalog ET G Answers for infrastructure.
The worldwide standard for home and building control GAMMA Building Control Product Catalog ET G1 2013 Answers for infrastructure. Related catalogs Low-Voltage Power Distribution and LV 10.1 Electrical
More informationALPHA SIMBOX Small Distribution Boards
ALPHA SIMBOX Small Distribution Boards /2 Introduction /3 Introduction /4 Flush-mounting and hollow-wall distribution boards /5 Surface-mounting and hood-type distribution boards /6 Accessories /7 Dimensional
More informationVENTILATION BUTTONS 24 V DC
VENTILATION BUTTONS 24 V DC Ventilation button (with foil push buttons and displys) Application: Ventilation button for connection to the ventilation inputs of SHEV or natural ventilation control units.
More informationSafety Systems Safety Integrated
3SE2 / SE3 Molded plastic /metal enclosure with separate actuator Application Safety interlock switches with separate actuator are used where the position of doors, covers or safety screens must be monitored
More informationRoller shutters and awning operators Convenient controls for comfortable living
Roller shutters and awning operators Convenient controls for comfortable living 2 About SOMMER About SOMMER WE DELIVERY THE QUALITY YOU ENJOY THE CONVENIENCE! With reliable gate operators from SOMMER,
More information9.5 nominal torque 4.5 W 16 VA. Min. 30 nominal voltage Min. 30 Nm. Reversible with switch By mounting. MIN (minimum position)
echnical data sheet EF24A- Communicative spring return actuator with emergency function for adjusting air dampers in ventilation and air conditioning systems in buildings For air dampers up to approx.
More informationProduct and Applications Description. Application programs. instabus EIB Technical Product Information. February 2012
Product and Applications Description Application programs UP 220/31 07 B0 S4 On-off-toggle/Dim/Shu/Value 982201 The push button interface UP 220/31 is a binary input and output devices for installation
More informationSwitch Disconnectors, Main and EMERGENCY-STOP Switches
General data Overview Siemens G 2010 1 2 3 NSE0_01931b 4 5 6 7 1 uxiliary switch (3SB for 3K; 3KX for 3KE) 2 IP20 terminal cover (Operator side) 3 3K switch disconnector 4 rcing contacts (only for 3KE)
More informationBlind actuator 4-gang 230 V AC Order-No
KNX/EIB Product documentation Issue: 11.02.2011 Blind actuator 4-gang 230 V AC KNX/EIB Product documentation Contents 1 Product definition... 3 1.1 Product catalogue... 3 1.2 Function... 3 2 Installation,
More informationBNS SERIES - COMPATIBLE SERIES AES SAFETY CONTROLLERS SELECTION CHART AVAILABLE STANDARD MODELS
BNS SERIES - COMPATIBLE SERIES AES SAFETY CONTROLLERS SELECTION CHART AVAILABLE STANDARD MODELS Safety Controller Suitable for use with Coded-Magnet Sensor Part Numbers below BNS250... BNS33... BNS303...
More informationProduct and functional description
Product and functional description The instabus / DAI gateway 141 is a KX EIB device with one DAI output to which up to 64 DAI actuators (e.g. DAI ballasts) can be connected to. It is not allowed to connect
More informationFunctional data Factory settings Variable Setting Torque Inhibiting torque
echnical data sheet GK4A-MF Parameterisable SuperCap rotary actuator with emergency setting function and extended functionalities for adjusting air dampers in ventilation and air-conditioning systems for
More informationSIRIUS 3SE5, 3SE2 Mechanical Safety Switches Mechanical Safety
SIRIUS 3SE5, 3SE2 Mechanical Safety Switches Mechanical Safety With Separate Actuator 3SE5 Interlock Switches Overview SIRIUS 3SE5, 3SE2 Mechanical Safety Switches Position switches with separate actuator
More informationRXB10.1. Room controller. Siemens Building Technologies Building Automation DESIGO RXB. for chilled ceilings and radiators with EIB bus communication
3 870 DESIO RXB Room controller for chilled ceilings and radiators with EIB bus communication RXB10.1 The RXB10.1 controller is used for temperature control in individual rooms: For chilled ceilings and
More informationRMZ782B RMZ783B. Extension Modules. Building Technologies HVAC Products. Synco 700. for heating controller RMH760B
3 136 Synco 700 Extension odules for heating controller RH760B RZ782B RZ783B Extension modules for use with the RH760B heating controller to provide additional auxiliary functions Use Heating plants controlled
More informationRoom Temperature Controller
3 023 Room Temperature Controller for four-pipe fan coil units RCC30 Outputs for on / off valve actuators Outputs for three-speed fan Control depending on room or return air temperature Operating modes:
More informationProduct and functional description
Product and functional description Connection example The universal dimmer main module N 528/31 is an installation device for DIN-rail mounting, with N-system dimensions. It is designed for lighting control,
More informationCurrentWatch Current Sensors. EGF Series Ground Fault Sensors. Ground Fault Sensors with Solid-State or Mechanical Relay Outputs.
CurrentWatch Current Sensors Ground Fault Sensors with Solid-State or Mechanical Relay s 1 Contents Overview.................... 1 Model Selection, Switches...... 2 Model Selection, Accessories... 3 Wiring
More informationProduct and functional description. Application Program. instabus EIB Technical product information. April (6 x AC 230 V / 0,05 A)
Product and functional description also functions if the bus cable is not connected or if the bus communication fails. After a long push button action (> 2 s), the other valve group is selected. The yellow
More informationSafety Contacts: AC models MA-1 thru 5, 10, 12, 13, 16 1 N/C MA-13, 16, 21 2 N/C DC models MA-12, 13, 14, 16 1 N/C MA-13, 15, 16, 20, 21 2 N/C
r Safety Interlock Switches MA Series MA Magnetically Actuated Safety Interlock Switches Large selection choose from a large selection of contact configurations housed in plastic to satisfy most application
More informationDevices raised mounting
Devices raised mounting Illuminated actuator pushbutton Front protection Switching system Ø 29 mm Contacts Typ-Nr. e Illuminated actuator pushbutton IP 67 LL 1 NC - MA UT 14-476.36 1 4 17 12.15 M UT 14-436.36
More informationSRQ24A. Technical data. Safety notes. Rotary actuator for ball valves Torque 16Nm Nominal voltage AC/DC 24V Control: Open-close Running time 9s
SRQ24A Rotary actuator for ball valves orque 16Nm Nominal voltage AC/DC 24V Control: Open-close Running time 9s echnical data Electrical data Nominal voltage AC 24V, 50/60Hz / DC 24V Nominal voltage range
More informationFor full product information, visit Use the SpeedSpec code or scan the QR Code for quick access to the specific web page.
R Safety Interlock Switches MA Series MA For full product information, visit www.sti.com. Use the SpeedSpec code or scan the QR Code for quick access to the specific web page. Magnetically Actuated Safety
More informationMagnetic Style Safety Interlock Switches
Non-contact safety interlock switches are the best choice for washdown applications; the switch components are sealed and rated NEMA 4X, IEC IP67 Tolerant of dirt buildup, sensing distance, and alignment
More informationElectrical Actuators
OEM Electrical Actuators for valves VVP459..., VXP459..., VMP459..., VXG48, VXI48, VVG549 SSC319 SSC819 SSC319 operating voltage AC 230 V 3-position control signal SSC819 operating voltage AC 24 V 3-position
More informationProduct documentation
Product documentation Universal push-button module with integrated BCU, 1-gang Universal push-button module with integrated BCU, 2-gang Universal push-button module with integrated BCU, 3-gang Universal
More informationProduct and functional description
Product and functional description Connection example The universal dimmer submodule N 528/41 is an installation device for DIN-rail mounting, with N-system dimensions. It is designed for lighting control,
More informationPush Button Interface UP 220D31
Product and Applications Description Application programs UP 220/31 07 B0 S4 On-off-toggle/Dim/Shu/Value 982203 The push button interface is a binary input and output devices for installation in in-wall
More informationPGR-6101 MANUAL GROUND-FAULT & INSULATION MONITOR
Tel: +1-800-832-3873 E-mail: techline@littelfuse.com www.littelfuse.com PGR-6101 MANUAL GROUND-FAULT & INSULATION MONITOR Revision 0-C-041918 Copyright 2018 by Littelfuse, Inc. All rights reserved. Document
More informationSemi flush-mounted room temperature controllers with LCD
s 3 077 RDD310 RDE410 Semi flush-mounted room temperature controllers with LCD For heating systems RDD310 RDE410 RDD310 and RDE410 features: Operating voltage AC 230 V 2-position control with On / Off
More informationPower consumption In operation At rest For wire sizing. Torque Inhibiting torque. 150 s / C Sound power level Motor
echnical data sheet GK24A-SR Modulating SuperCap rotary actuator with emergency setting function and extended functionalities for adjusting air dampers in ventilation and air-conditioning systems for building
More informationProducts no longer available
echnical data sheet NVF4-MF(-E)-R Modulating linear actuator with emergency function for -way and 3-way globe valves Actuating force 800 N Nominal voltage AC/DC 4 V Modulating control DC 0... 10 V Position
More information1. Function. Table of Contents
address: 0A 5090 BUS LED Prog. Chapter 8: Blind actuators Art. no. 649912 Chapter 8:Blind actuatorsart. no.649912version 01/068.5Blind/switch REG-K/12x/24x/10 with manual mode Blind/switch actuator REG-K/12x/24x/10
More informationCompact Coded Magnetic Safety Interlock Switch and Control Units
C Conforms to EN292, EN60204-1, EN954-1, EN1088, EN60947-5-3, EN947-5-3, EN50081, EN50082, EN61000-6-2 UL and C-UL listed, TUV certified Description R US Compact Coded Magnetic Safety Interlock Switch
More informationIRI1-ES Sensitive Earth Fault Current Relay. Manual IRI1-ES (Revision A)
IRI1-ES Sensitive Earth Fault Current Relay Manual IRI1-ES (Revision A) Woodward Manual IRI1-ES GB Woodward Governor Company reserves the right to update any portion of this publication at any time. Information
More informationFCU-4 FAN COIL CONTROLLER
FCU-4 FAN COIL CONTROLLER BACnet Enabled Description The FCU-4 is designed to provide complete control of fan coil units. The FCU-4 incorporates all the inputs and outputs to ensure that this advanced
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker
Description Single or multipole hydraulic-magnetic circuit breakers with trip-free - mechanism and toggle actuation. A choice of switching characteristics ensures suitability for a wide range of applications.
More informationNon-communicating room controllers
3 882 DESIGO RXA Non-communicating room controllers RXA29.1 For fan-coil systems The RXA29.1 room controller are used for temperature control in individual rooms. For 2-pipe or 4-pipe fan-coil systems,
More informationDuct Sensors. Building Technologies HVAC Products. Symaro. for relative humidity and temperature with calibration certificates
1 883 1883P01 1883P02 QFM4160 AQF4150 Symaro Duct Sensors for relative humidity and temperature with calibration certificates QFM41 Operating voltage AC 24 V / DC 1353 Signal output DC 010 V / 420 ma for
More information1373-1-8645 23.09.2014 Operating Instructions Comfort timer control element for blind, light, and relay control 6455-101-500 6455-101-509 1 Safety... 4 2 Intended use... 4 3 Environment... 4 4 Setup and
More informationInterlock Switches. Selection Guide. HS7A-DMC Magnetic Safety Switches
HSA-DMC Magnetic Safety Switches Key features: Compact size and easy positioning. Combination with proprietary relay modules achieves safety category 4 (EN954-1). Compact size ( 16 51mm) Positioning for
More informationPower consumption In operation At rest For wire sizing
echnical data sheet Modulating damper actuator for adjusting air control dampers in ventilation and airconditioning systems for building services installations For air dampers up to approx 08 m orque Nm
More informationUse of the application program. Functional description. GAMMA instabus Application program description. April A4 Roller shutter switch
Use of the application program Product family: Product type: Manufacturer: Shutter Switch Siemens Name: Roller shutter switch N 523/03 Order no.: 5WG1 523-1AB03 Functional description Application The roller
More informationProduct documentation
Product documentation Rotary sensor ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 58579 Schalksmühle Telefon: +49.23 55.8 06-0 Telefax: +49.23 55.8 06-2 04 kundencenter@jung.de www.jung.de Service Center Kupferstr.
More informationImmersion Temperature Sensors
1 782 1782P01 Symaro Immersion Temperature Sensors QAE2164 QAE2174 Active sensors for acquiring the water temperature in pipes and tanks Operating voltage AC 24 V or DC 13535 V Signal output DC 010 V or
More informationSiemens AG KD Switch Disconnectors SENTRON. Edition December Answers for infrastructure and cities.
KD Switch Disconnectors SENTRON Edition December 01 Answers for infrastructure and cities. Related catalogs Low-Voltage Power Distribution and LV 10 Electrical Installation Technology SENTRON SIVACON ALPHA
More informationGeneral catalogue Export SMOUTS ARCHITECTEN
General catalogue 2011-2012 Export SMOUTS ARCHITECTEN 01 NIKO HOME CONTROL INTERIEUR DEWAIDE Project management Configuratie Installatie Help Niko Home Control (available from 1 August 2011) Live it, love
More informationTechnical specifications
Technical specifications General information Operating temperature -25 to 60 C Storage temperature -40 to 70 C Enclosure type Panel installation (DIN IEC 61554) Enclosure fixing Screw-type clamping technology
More informationSIGUARD Safety Systems Safety Integrated
SE 10 / SE. 00 / SE. 4 / SE. 5 Molded plastic / metal enclosure with separate actuator Application Safety interlock switches (limit switches) with separate actuator are used where the position of doors,
More informationProducts no longer available
echnical data sheet NV4-MF(-) Modulating linear actuator for -way and 3-way globe valves Actuating force 1000 N Nominal voltage AC/DC 4 V Modulating control DC 0... 10 V Position osition feedback feedbac
More informationRMZ782B RMZ783B. Extension Modules. Building Technologies HVAC Products. Synco 700. for heating controller RMH760B
3 136 Synco 700 Extension odules for heating controller RH760B RZ782B RZ783B Extension modules for use with the RH760B heating controller to provide additional auxiliary functions Use Heating plants controlled
More informationSwitching Actuators N530, 6AX Switching Actuators N532, 10AX Switching Actuators N534, 16/20AX
Gamma instabus Technical Product nformation Switching Actuators N53, 6AX Switching Actuators N532, 1AX Switching Actuators N534, 16/2AX 4x AC 23V 5WG1 53-1DB31 5WG1 532-1DB31 5WG1 534-1DB31 8x AC 23V 5WG1
More information