UB Indicators UB. Red, Bright LED. Silver, Straight PC Terminals. Part Numbers for Alternating Legends

Transcription

1 UB ounting Types PCB ounting 01 Square 03 Rectangular * Snap-in ounting 04 Square 06 Rectangular Rectangular with 06B Side Barriers * Standard with Solder Lug terminals K Housing Black Terminals W01 Silver Solder Lug (for Snap-in ounting) W03 Silver Straight PC (for PCB ounting) 01 K W03 5C JC LED 6B 6F 6G LEDs Bright LED 5C Red 5D Amber 5F White Blue Bicolor LED 6CF Red/ 6DG Amber/Blue DESCRIPTION FOR TYPICAL ORDERING EXAPLE UB01KW035C-JC Clear Lens with Red Diffuser Square with PCB ounting Red, Bright LED Silver, Straight PC Terminals AB Cap Types & Colors Full Face Illuminated Cap for Bright LED Lens/Diffuser Colors CB Red/White FF / CC Red/Red *FJ /Clear *CJ Red/Clear Clear/White DB Amber/White JC Clear/Red DD Amber/Amber JD Clear/Amber *DJ Amber/Clear JF Clear/ FB /White *JJ Clear/Clear * Not available with Rectangular cap Full Face Illuminated Cap for LED Clear Lens/White Diffuser Spot Illuminated Cap for Bright & LEDs Black with White Window Bicolor Alternating Legend Cap/Diffuser for Square or Rectangular JCF Red/ JDG Amber/Blue Alternating Legends 11 ON (pos) OFF (pos) 12 ON (neg) OFF (neg) 13 START STOP 14 OPEN CLOSE Part Numbers for Alternating Legends Square Alternating Legends Rectangular Alternating Legends Color Part Number Color Part Number Color Part Number Color Part Number AT9450CF11 AT9450DG11 AT9451CF11 AT9451DG11 Red/ AT9450CF12 Amber/ AT9450DG12 AT9451CF12 Amber/ AT9451DG12 Red/ AT9450CF13 Blue AT9450DG13 AT9451CF13 Blue AT9451DG13 AT9450CF14 AT9450DG14 AT9451CF14 AT9451DG14 Refer to Ordering Table for Alternating Legend that corresponds with last 2 digits of part number /12/18

2 Complement to UB Pushbuttons Lens/Diffuser Colors Available for Square Cap: CB CC CJ DB DD AB DJ FB FF FJ JC JD JF JJ AT4074 Lens AT4075 Diffuser Black Cap with Translucent White Window for LED Display aterial: Polycarbonate Finish: atte BRIGHT & SUPER BRIGHT LED COLORS & SPECIFICATIONS The electrical specifications shown are determined at a basic temperature of 25 C. LED circuit is isolated and requires external power source. Polarity marks are on bottom of switch. If the source voltage exceeds the rated voltage, a ballast resistor is required. Resistor value can be calculated by using the formula in the Supplement section. LED is an integral part of switch and not available separately. LEDs are Electrostatic Sensitive CAP TYPES & COLOR BINATIONS Full Face Illuminated Cap for Bright LED Lens/Diffuser Colors Available for Rectangular Cap: AT4117 Lens AT4118 Diffuser Lens & Diffuser aterial: Polycarbonate Lens Finish: Glossy Diffuser Finish: Textured AT4119 Square for Bright and LED Sq (10.35) Sq Spot Illuminated Caps Bright Sq AT4120 Rectangular for Bright and LED Color Codes: A Black B White C Red D Amber F J Clear CB CC DB DD (1.9).075 FB FF JC (3.1).122 JD JF Color Red Amber White Blue Unit aximum Forward Current I F ma Typical Forward Current I F ma Forward Voltage V F V aximum Reverse Voltage V R V Current Reduction Rate Above 25 C I F ma/ C Ambient Temperature Range 25 ~ +50 C 25 ~ +50 C (+) (-) AT4074 Square Lens AT4188 Square Diffuser ATTENTION ELECTROSTATIC SENSITIVE DEVICES 5C 5D 5F 6B 6F 6G Full Face Illuminated Caps for Bicolor LED Sq (10.35) Sq AT4117 Rectangular Lens AT4189 Rectangular Diffuser Lens & Diffuser aterial: Polycarbonate Lens Finish: Glossy Diffuser Finish: Textured (10.35) (10.35) (15.35).604 (15.35).604 (1.9).075 (3.1)

3 SUPER BRIGHT BICOLOR LEDS FOR ALTERNATING LEGENDS The electrical specifications shown are determined at a basic temperature of 25 C. LED circuit is isolated and requires external power source. Polarity marks are on bottom of switch. If the source voltage exceeds the rated voltage, a ballast resistor is required. Resistor value can be calculated by using the formula in the Supplement section. LED is an integral part of switch and not available separately. Bicolor Red/ LED with 2 elements Electrical Specifications for Bicolor LEDs ATTENTION ELECTROSTATIC 6CF 6DG LEDs are SENSITIVE DEVICES Electrostatic Sensitive Color Red Amber Blue Unit aximum Forward Current I F * 30 * 30 * 30 * 30 ma Typical Forward Current I F ma Forward Voltage V F V aximum Reverse Voltage V R V Current Reduction Rate Above 25 C I F ma/ C Ambient Temperature Range 25 ~ ~ +50 C * Value applies to single color illumination for either Red or or Amber or Blue. When both colors are illuminated simultaneously, the sum of the currents should not exceed the smallest value of the maximum forward current. AT mm Square Flat Cap Alternating Legend Caps for Bicolor LED JCF JDG JCF JDG AT9450 Square Legend Insert AT4188 Square Diffuser LC (+) Sq Lens & Diffuser aterial: Polycarbonate L1 (-) Red L2 (-) Lens Finish: Glossy Bicolor Amber/Blue LED with 2 elements AT mm x 17.0mm Rectangular Flat Cap AT9451 Rectangular Legend Insert AT4189 Rectangular Diffuser Legend Insert aterial: Polyethylene Terephthalate (PET) Diffuser Finish: Textured Standard Alternating Legend Pairs ON OFF ON OFF START STOP Cap illumination is alternating /Red or Blue/Amber; legend text is black. Contact factory for other Alternating Legends. Legend illustrations are approximate representations of the actual characters on the filters. LC (+) 14 OPEN L1 (-) Amber L2 (-) Blue CLOSE /Red or Blue/Amber /Red or Blue/Amber /Red or Blue/Amber /Red or Blue/Amber 23

4 Complement to UB Pushbuttons Square PCB ount UB01KW035C-JC Square Snap-in ount Built-in Bezel UB04KW015C-JC Rectangular Snap-in ount Built-in Bezel UB06KW015D-DD Rectangular Snap-in ount Built-in Side Barriers UB06BKW015F-FF Sq Rectangular PCB ount UB03KW035F-FF (15.24) Sq (15.24) Sq (20.32).800 Sq TYPICAL INDICATOR DIENSIONS (3.9).154 (8.6).339 Typ Typ Typ Typ Typ.. L L (2.0) (2.0) Typ (2.0) Typ L+ L L+ L Sq 1.0 ~ 3.2mm ( ~.126 ) 1.0 ~ 3.2mm ( ~.126 ) 1.0 ~ 3.2mm ( ~.126 ) 24

5 Sq (15.24) Sq (15.24) Sq (20.32).800 Sq (3.9).154 TYPICAL INDICATOR DIENSIONS (8.6).339 Square PCB ount Alternating Legends UB01KW036DG-JDG11 Rectangular PCB ount Alternating Legends UB03KW016DG-JDG11 Square Snap-in ount Built-in Bezel Alternating Legends (1.0 ~ 3.2mm) ~.126 UB04KW016DG-JDG11 Rectangular Snap-in ount Built-in Bezel Alternating Legends (1.0 ~ 3.2mm) ~.126 UB06KW016DG-JDG11 Rectangular Snap-in ount Built-in Side Barriers Alternating Legends (1.0 ~ 3.2mm) ~.126 C L LC L2 L1 C L LC L2 L1 Sq UB06BKW016DG-JDG11 25