FULL HD MINI DV SPORTS CAMERA QUICK START GUIDE

Transcription

1 FULL HD MINI DV SPORTS CAMERA QUICK START GUIDE

2 Please read this user manual carefully before any attempt to operate this product and keep it for your future reference. FEATURES: MINI camera recorder High definition full HD 1080P/720P Compact design, portable handheld Supports TV out, TV monitor video connection Built-in lithium battery sustainable camera, about 30 to 100 minutes recording time Supports up to 32GB TF card maximum (not included).

3 DETAILED IMAGE: Note:This item is without waterproof. OPEARTIONS: OPERATIONS: 1. CHARGING: When you receive your Enji MiniEye Camera, use the provided cable to fully charge the camera. Plug the mini-usb connector into the camera and the normal USB plug into your computer or use an external charger. Charging time will take 2-3 hours. A flashing

4 red LED indicates the charging cycle. After charging is completed, the LED turns into solid red. Keep charging the camera for additional 30 minutes. Battery life varies from 30 to 100 minutes depending on the use of the device. You can also connect the camera to an external power source to charge, while you are using the camera (in case that an SD-card is inserted already) It will start to record in the 720p mode. Then a blue LED will flash 3 times to let you know that the video is recording; push again the on/off button to stop the recording.

5 2. POWERING THE CAMERA ON/OFF: To POWER ON the camera, push the ON/OFF button for 2 seconds to power the camera on. NOTE: If NO memory card is inserted, a blue LED will light for a few seconds, after that a red LED will flash and the camera turns off. When an SD Card is inserted, a solid blue LED is visible when turned on. Please use a high speed Class 10 FAT formatted memory card. The camera supports up to maximum of 32 GB (original SanDisk, Samsung and Kingston brands are most preferred).

6 To POWER OFF the camera, push the ON/OFF button for 6 seconds and the camera will turn off P VIDEO RECORDING: With a blue LED light, push on/off button once to begin recording. The blue LED will flash 3 times and recording starts. At this time the LED light is off. To STOP recording, push the on/off button. The LED light turns blue. Note: For long recordings, video streaming is saved and divided into separate files every 5 minutes.

7 P VIDEO RECORDING: Change to 1080P by using the 'Mode' button. Push the 'Mode' button once, and the LED will turn from blue to blue/red. Push the ON/OFF button once to begin recording. The LED will flash blue and red three times and the recording in 1080P begins. During 1080P recording, no LED is lit. Push the ON/OFF button again to stop recording. The state of the LED returns to blue/red. Note: For long recordings, video streaming is saved and divided into separate files every 5 minutes.

8 5. SHOOTING IMAGES: Change to Photo Mode by using the 'Mode' button. Push the 'Mode' button twice. The LED will turn from blue to red. Press the ON/OFF button to take photos. Press once, the red light flashes and takes a photo. 6. NIGHT VISION: To activate night vision mode, make sure that the camera is on. Pressing the ON/OFF button for 2-3 seconds. You can see the red LED will flash 2 times then off. The Night Vision IR LED is on. Press the on/off button 2-3 seconds to turn

9 off Night Vision. Then the red LED light will flash 2 times and night vision is off P MOTION DETECTION : Power on the camera and wait until the blue LED lights up. Press the 'Mode' button for about 3 seconds. The blue/red LED light will flash three times indicating that motion detection is active. During recording, the LED is off. The camera will now record a one minute video file then go to motion detection standby. Once a new movement is detected, the camera begins to record again. A new movement detection is indicated by a short

10 blue/red flashing LED. Stop the detection mode by pressing the ON/OFF button P MOTION DETECTION : Power ON the camera and wait until the blue LED lights up. Change to 1080P by using the 'Mode' button. Push the 'Mode' button once, and the LED light will turn from blue to blue/red. Press the 'Mode' button for about 3 seconds. The blue/red LED light will flash three times indicating that motion detection is active. During recording, the LED is off. The camera will now record a one minute video file then

11 go to motion detection stand by. Once a new movement is detected, the camera begins to record again. A new movement detection is indicated by a short blue/red flashing LED. Stop the detection mode by pressing the ON/OFF button. 9. RESETTING THE CAMERA Reset the camera when it does not operate normally. Use a Pin to poke into the hole near the mini-usb socket. Be careful not to insert it

12 into the mic hole. When the blue LED light is off, the reset is done. Turn on the camera to resume use. 10. HOW TO VIEW YOUR VIDEO & PHOTO Use the provided cable to connect the camera to your computer or laptop. Plug the mini-usb connector into camera and the USB plug in your computer/ laptop. You will see the camera as an external hard disk on your computer screen. Double click to start reviewing your photos/video.

13 11. HOW TO VIEW THE VIDEO IN REAL TIME ON TV Use the provided cable to connect the camera to the TV. Plug the mini-usb connector into the camera and the AV connector to your TV, so you can then watch your video live after you start the camera in any one of the modes. Video recording detection mode and photo shooting are available while on Video output, but IR Night Vision is off. Note: Insert a memory card when you use TV out function.

14 12. TIME STAMP Connect the camera to computer. When a blank SD card is inserted, the camera will create a time/date data on your video/photo. The format is (N for no display) and (Y for display). Open the TIMEREST.txt in a text editor and set the correct date and time as well as 'N' or 'Y' at the end to display or not the time stamp in your video/photo. 13. USING ENJI MINIEYE AS A WEBCAM It is possible to use the Enji MiniEye as a webcam, but not all programs support this

15 camera. One very interesting program is the 'Debut Video Capture Software' from NCH. Click on this link to download the software: Installing and Using the software: Download the program from the website and install it.

16 Connect your Enji MiniEye to your computer and wait until the drivers are installed. (Note: you do not need to remove the SD-card.) The LED first lights up blue, then turns into blinking red, which means that the camera is in charging mode. Push the ON/OFF button of the camera (additional drivers will be installed). Push the ON/OFF button of the camera (additional drivers will be installed).

17 Open the 'Tools' menu, then 'Options'. In the Video tab, choose the device 'GENERAL-UVC'. The Enji MiniEye is now ready for use.

18 14. RELEVANT PARAMETERS: Items Relevant Parameters Video Resolution 1920*1080/1280*720 Image Resolution Video Coding Video Frames Storage Type of Interface Battery Capacity Charging Time Working Duration Charging Voltage 12MP(4032x3024) M-JPEG 30fps Max support 32GB Micro SD Card Mini 8 pin USB Built-in 200mah About mins About 2-3 hours DC = 5V

19 15. FREQUENTLY ASKED : I'm having difficulty working out what storage card to buy. What size do I buy? You may use the standard 32GB Micro card. A high speed C10, FAT format memory card is most ideal. Original Micro memory card like SanDisk, Kingston, or Samsung brands are also preferred. Can we use the camera during charging? Yes, you can, but it will reduce the service life of the battery. Get max 1 amp charger so that it won t overheat. Does the Enji MiniEye Camera work without a TF card? No, it does not work without a TF card. What should I do when pause and frame skip occur in video and picture playback? Format your original SD or

20 TF card. Use a card reader to read the images and videos. Or install another video player or try a new formatted high-speed memory card. Is this camera bluetooth and wifi capable? No it is not. Must use the USB cable. Why is there noise when recording? Because of low battery, please make sure the camera is fully charged. What can I do when the camera system crashes? Pull out the SD or TF card and press the power button; if it doesn't work, use a toothpick or something pointed to poke the reset hole and then press the power button again. This mini camera works on 32 GB TF Card only? Would it work on 64 GB TF card as well? It supports 32GB TF

21 card (not included). It does not work with 64 GB TF card. 1080P (FHD) - 30fps or 15fps? Video Frame Rate: 30fps. How do you mount the camera to a bicycle handle bar or drone? It comes with an alligator type clip that clips to a snap on bracket at the back of the camera. The camera stops recording automatically, what should I do? Reset the camera or change SD card to a high speed C10 original memory card. How long will battery hold with a single charge? The MiniEye Spy Camera can hold from 30 to 100 mins depending on the extent of use. What is the range of the camera to detect motion and will this record the entire time it detects motion? The range is

22 5 meters, yes, it can record the entire time while on Motion Detection mode. Can you also take pictures with this camera? Yes, absolutely you can take a picture with the camera. Can I put this on my door so I can see who is knocking? Only if you connect the camera to a PC or Mac like a webcam. That's the way to get live feeds. Or connect the camera to your TV screen for real time monitoring. Can the camera be hard wired for power? Yes, you can do that or connect it to a power bank or a with a 1Amp wall charger. Can you change the battery when in the future it will become old and will lose power? We are sorry that the

23 item is unable to support this function. How will I know when the camera is recording or when it is not recording? Is there an indicator? Yes, it has an indicator. How much does it weigh? 19 grams w/ memory card Can it be watched from iphone? No. It only supports video recording, taking photos, motion detections and stores in a micro memory card. Connect the camera to a computer via USB cable to replay images and video. You can connect the camera to TV screen via USB-TV-Cable for live viewing. Connect camera to PC/Laptop via USB-TV-Cable for replaying videos and images. Is it waterproof? Please note that it is not waterproof.

24 Are there accessories to make it go underwater? Currently, there is no accessory to make it go underwater. Will this work outdoors where there is no electricity? Yes, it has an internal battery that will run from 30 to 100 minutes depending on the mode you are using. Does this have to be connected to a phone to record? No, you do not have to connect it to a phone to record. Does it record audio? Yes, it records audio with the video recording. How do I hook up the camera? It comes with a clip that you can mount it with. For more information, info@enji-prime.com Website: