DME DIN Metric Components. New components expand in-stock line

Size: px

Start display at page:

Download "DME DIN Metric Components. New components expand in-stock line"

Zoe Patrick
6 years ago
Views:

1 DME DIN Metric Components New components expand in-stock line

Bronze-Plated Wear Plates Metric T DME Bronze-Plated Wear Plates provide a long-lasting wear surface for Bronze-Plated molds requiring slides, cams or

635mm) within 47.992in. (1219mm) Bronze-Plated Wear Plates WPM Metric n Thickness of bronze: 0.20in. to 0.25in. (5.08mm to 6.

4mm) T Thickness 0.051 W Width 1.524 by 1 in. (25.4mm) T Thickness 0.051 W Width 1.524 NOTE: Machining may cause distortion which can result in the loss of flatness of the part.

WPM1220 10mm 12mm 35mm 40mm All items in stock. when ordering, please specify: 1. Iitem numbers from tables 2. Plate length 3. Number of pieces 4.

2 Bronze-Plated Wear Plates Metric T DME Bronze-Plated Wear Plates provide a long-lasting wear surface for Bronze-Plated molds requiring slides, cams or flat surfaces where frictional wear is a factor. W L n In order to be flat this material must be fastened to a flat surface n Parallel 0.025in. (0.635mm) within in. (1219mm) Bronze-Plated Wear Plates WPM Metric n Thickness of bronze: 0.20in. to 0.25in. (5.08mm to 6.35mm) n Milled edges Standard wear strips are plated on one side only. Up to four sides can be plated, call DME for a cost quotation. by 1 in. (25.4mm) T Thickness W Width by 1 in. (25.4mm) T Thickness W Width NOTE: Machining may cause distortion which can result in the loss of flatness of the part. Once altered, DME will not replace wear strips. DME offers custom wear strips that meet your application needs. Please send your prints to DME@dme.net to receive a cost quotation. WPM0405 WPM0420 WPM0505 WPM0506 WPM0515 WPM0520 WPM0606 WPM0608 WPM0610 4mm 5mm 6mm 40mm WPM1005 WPM1006 WPM1007 WPM1008 WPM1010 WPM1020 WPM1210 WPM1215 WPM mm 12mm 35mm 40mm All items in stock. when ordering, please specify: 1. Iitem numbers from tables 2. Plate length 3. Number of pieces 4. Method of shipment WPM0612 WPM0805 WPM0812 WPM0815 8mm 60mm 60mm NOTE: Wear Plate lengths are available in 1in. (25.4mm) increments, with a minimum order length of 6in. (152.4mm) required. Minimum cut length is 6in. (152.4mm.) WPM1515 WPM mm WPM WPM WPM mm WPM2505 WPM2520

3 Self-Lubricating L-Gibs Metric Self-Lubricating L-Gibs Metric L-GIBS METRIC SOLID BRONZE SELF-LUBRICATING l W a b C f g H j K QUANTITY D e ±0.127 M S M & S Size SLGM SLGM SLGM SLGM SLGM M10 SLGM SLGM SLGM n Plastics injection molds n Special machines n Press gibbing n Special slide applications NOTES: 1. Tolerances are ±.010 unless otherwise indicated. 2. Graphic plug pattern varies by product size. when ordering, please specify: 1. item numbers from tables 2. Quantity 3. Method of shipment DME Self-Lubricating L-Gibs provide a long-lasting wear surface for high-production molds using slides and cams. L-Gibs are easy to machine and can be shaped to any configuration, requiring no special tools.

4 Leader Pins Metric D3 D2 D1 20mm through 60mm (Not all pins are ground on centers.) NOM. PIN DIA. D GENERAL DIMENSIONS D D Overall Length 20mm LEADER PINS METRIC 40mm U.S n Canada n 60mm MLP2050 MLP mm MLP2060 MLP mm MLP2070 MLP2570 MLP mm MLP2080 MLP2580 MLP mm MLP2090 MLP2590 MLP3090 MLP mm MLP20100 MLP25100 MLP30100 MLP mm 120mm MLP mm MLP mm MLP mm MLP mm 140mm MLP mm MLP mm MLP mm MLP mm 1 MLP mm MLP mm 160mm MLP mm MLP mm MLP mm MLP mm 1 MLP mm MLP mm 180mm MLP mm MLP mm MLP mm MLP mm 200mm MLP mm MLP mm MLP mm MLP mm MLP mm MLP mm 220mm MLP mm MLP mm MLP mm MLP mm 2 MLP mm MLP mm 240mm MLP mm MLP mm MLP mm MLP mm 2 MLP mm MLP mm 260mm MLP mm MLP mm MLP mm 2 MLP mm MLP mm 280mm MLP mm MLP mm MLP mm 300mm MLP mm MLP mm MLP mm MLP mm MLP mm 3 MLP mm MLP mm 3 MLP mm MLP mm 3 MLP mm MLP mm 400mm MLP mm MLP mm

5 Bronze-Plated Shoulder Bushings, Ejection Bushings, & Self Lubricating Guided Ejection Bushings Metric Bronze-Plated Shoulder Bushings METRIC Precision-ground steel with exclusive bronze plating, these are the only bushings that have oil grooves and a true bushing surface that extends the full length of the bushing. DME Bronze Bushings perform smoother and longer than plain steel bushings. Selected lubricant is distributed throughout the bearing surface by the figure-8 oil groove system. The bronze surface will not gall. General Dimensions D2 D1 D nominal i.d. D1 D2 D Bronze-Plated Shou & Self Lubricating G L INSIDE DIAMETER Length mm 40mm 60mm LBBM2025 LBBM2525 LBBM3025 LBBM LBBM2030 LBBM2530 LBBM3030 LBBM4030 LBBM5030 LBBM LBBM2040 LBBM2540 LBBM3040 LBBM4040 LBBM5040 LBBM LBBM2050 LBBM2550 LBBM3050 LBBM4050 LBBM5050 LBBM LBBM2065 LBBM2565 LBBM3065 LBBM4065 LBBM5065 LBBM LBBM2080 LBBM2580 LBBM3080 LBBM4080 LBBM5080 LBBM LBBM20100 LBBM25100 LBBM30100 LBBM40100 LBBM50100 LBBM LBBM20120 LBBM25120 LBBM30120 LBBM40120 LBBM50120 LBBM LBBM25140 LBBM30140 LBBM40140 LBBM50140 LBBM LBBM25150 LBBM30150 LBBM40150 LBBM50150 LBBM Bronze-Plated Guided Ejection Bushings METRIC Number NOMINAL I.D. D1 D2 D3 D4 l1 l2 l3 l GEBM GEBM GEBM D3 D4 L5 D1 D2 Ejector Bushings Self Lubricating METRIC Number NOMINAL I.D. D1 D2 D3 D4 l1 l2 l GBEM GBEM GBEM D3 D4 D1 D2 n Self lubricating n Consistent quality control n Resists abrasion n Excellent wear characteristics All items in stock. QUANTITY DISCOUNTS: Guided Ejection Bushings. Discounts apply to current net prices. Any combination of pins and bushings may be mixed for quantity discounts. 16 to 27 Less 10%; 28 or more Less 15% NOTES: 1. Select corresponding guide pin in proper diameter and length for application. 2. These bushings are interchangeable with comparably sized DME bronze-plated and solid bronze guided ejection bushings.

6 DME also offers a wide array of JIS metric components Precision made from superior quality thermal shock resistant hotwork steel. The heads are hot forged to provide uniform grain flow and high tensile strength. Manufactured to Japanese Industrial Standards (JIS) these pins are ideal for new and existing molds employing JIS dimensions and tolerances. World Headquarters DME Company LLC Stephenson Highway Madison Heights, MI toll-free tel tel toll-free fax web dme@dme.net DME of Canada Ltd Northwest Drive Mississauga, Ontario Canada L4V 1J toll-free tel tel toll-free fax dme_canada@dme.net DME Europe DME Belgium C.V.B.A. Industriepark Noord B-2800 Mechelen Belgium tel fax sales@dmeeu.com DME Mold Technology (Shenzhen) Co., Ltd. C-108 Huahan Building No. 16 Langshan Rd. Northern Hi-Tech Industrial Zone Nanshan District, Shenzhen , China (86-755) tel (86-755) fax cs@dmechina.net Printed in U.S.A. MEL-10/13

TABLE OF CONTENTS. Shoulder Bushings Bronze Plated Inch Hardened Steel Self-Lubricating Bronze Plated Metric...

TABLE OF CONTENTS. Shoulder Bushings Bronze Plated Inch Hardened Steel Self-Lubricating Bronze Plated Metric... 1 TABLE OF CONTENTS Shoulder Bushings Bronze Plated Inch... 3 Hardened Steel... 4 Self-Lubricating... 4 Bronze Plated Metric... 5 Straight Bushings Bronze Plated... 6 Hardened Steel... 6 Lamina, Inc. began