Increase service life and extend productivity

Transcription

1 Increase service life and extend productivity Sandvik drill steel has high fatigue strength, toughness and offers high wear resistance givg an efficient and economic drillg operation. The unique wear resistant carbide grade our tegral drill steel, combation with the generous carbide volume, provides extended service life all applications. Our unique R23 rods and bits for extension drillg provide the strongest thread hole sizes For the most aggressive applications we have fully carburized rods with superior wear resistance and service life. In fact workg with Sandvik means that you can expect consistent high quality and maximum operational dependability when it comes to all small hole drillg applications. SMA HOE RIING H19 (3/4) INTEGRA RI STEES 18 H22 (7/8") INTEGRA RI STEES 19 REAMING TOOS 20 H22 TAPERE TOOS, 12 TAPER 21 H22 TAPERE TOOS, 11 TAPER 23 H22 TAPERE TOOS, 7 TAPER 24 STONE WORKING TOOS 25 R22 (7/8") EXTENSION RIING TOOS 26 R23 (29/32") EXTENSION RIING TOOS 27 R25 (1") EXTENSION RIING TOOS 38 SANVIK APHA. α250 BIT THREA 29

2 H19 (3/4 ) Small hole drillg H19 (3/4 ) Integral drill steels imensions Series ft Shank 19 x 108 (3/4 x 4 1/4 ) ' 4" 29 19/64" Hex Hex ' 7" /64" ' 3" /16" ' 10" /32" Hex ' /16" ' 11" /32" Bouldersteel 400 1' 4" 24 15/16" ' 7" 23 29/32" Shank 22 x 108 (7/8 x 4 1/4 ) 400 1' 4" 24 15/16" Hex Hex ' 4" /64" ' 7" /64" ' 3" /16" Hex 18

3 Small hole drillg H22 (7/8 ) Integral drill steels H22 Reamg imensions Series ft Shank 22x108 (7/8 x 4 1/4 ) ' 7" /32" Hex Hex ' 3" /64" ' 10" /4" ' 6" /32" ' 1" /16" Hex ' 9" /64" ' 4" /64" ' /16" ' 8" /32" ' 7" /64" ' 3" /32" ' 10" /2" ' 6" /64" ' 1" /64" ' 9" /8" ' 4" /32" ' /64" ' 8" /4" ' 4" /32" ' 7" /64" ' 11" /4" ' 3" /32" ' 7" /16" ' /8" ' 11" /32" ' 11" /64" ' 10" /4" ' /8" ' 11" /64" ' 11" /32" ' 10" /2" ' 7" /64" ' 3" /32" ' 11" 25 1" ' 6" 25 1" ' 7" /64" ' 3" /64" ' 10" /16"

4 H22 Reamg Small hole drillg H22 Reamg tools imensions Hex ft Pilot rod, Hex 22, 6 taper 800 2' 7 1/2" /32" ' 11 3/4" /32" Hex Hex ' 6 3/4" /32" ' 2 1/2" /32" Reamg tools for cut holes / Reamg bit, 6 taper Buttons, Angle imensions 4x8 8x /2" S48 4x10 8x " S48 6x10 8x /2" S48 20

5 Small hole drillg H22 Tapered tools, 12 taper H22-12 Bits Flushg hole, Buttons, Angle imensions Button bit 1x5 1x5 1x7 4x /8" B48 1x5 1x5 1x7 4x /16" B48 Button bit 2x4 1x4 2x7 5x /4" B48 2x4 1x4 2x7 5x /8" B48 2x4 1x4 2x7 5x /2" B48 Button bit 2x4 1x4 2x7 5x /64" B48 2x4 1x4 2x7 5x /8" B48 Button bit 1x4 1x6 2x7 5x /64" B48 1x5 1x5 2x7 5x /8" B48 Button bit 2x4 1x4 6x7 2x /64" B48 Cross bit 1x4 2x /16" x6 2x /4" x6 2x /8"

6 H22-12 Small hole drillg H22 Tapered tools, 12 taper Rods imensions Tapered rod, shank 22x108, carburized Hex Tapered rod, shank 22x108, HF-hardened - For surface drillg Hex Hex ft Hex 610 2' 22 7/8" ' 22 7/8" ' 22 7/8" ' /8" ' 22 7/8" ' 22 7/8" ' /8" ' 22 7/8" ' 22 7/8" ' /8" ' 1 1/2 22 7/8" ' /8" ' /8" ' 4 1/2 22 7/8" ' 22 7/8" ' 7 1/2 22 7/8" ' /8" ' 10 1/2 22 7/8"

7 Small hole drillg H22 Tapered tools, 11 taper H2-11 Bits Flushg hole, Buttons, Angle imensions Button bit 1x6 1x6 2x8 3x /2" B48 1x6 1x6 2x8 3x /64" B48 Button bit 1x5 1x5 2x7 5x /4" B48 1x5 1x5 2x7 5x /8" B48 1x5 1x5 2x7 5x /16" B48 1x5 1x5 2x7 5x /2" B48 1x6 1x6 2x8 5x /64" B48 Rods imensions Tapered rod, shank 22x108, carburized Hex Hex ft Hex 610 2' 22 7/8" /2 22 7/ ' 22 7/8" ' 3" 22 7/8" ' 22 7/8" / ' 22 7/8" ' 22 7/8" ' 9 1/2 22 7/8"

8 H22-7 Small hole drillg H22 Tapered tools, 7 taper Bits Flushg hole, Buttons, Angle imensions Button bit 2x5 1x5 2x7 5x /4" B48 2x4 1x4 2x7 5x / B48 2x4 1x4 2x7 5x /8" B48 2x4 1x4 2x7 5x /2" B48 Rods imensions Tapered rod, shank 22x108, carburized Hex -22 Hex ft Hex ' 22 7/8" ' /8"

9 Small hole drillg Stone workg tools Stone tools imensions Hex ft Plug hole tegral steel Hex " 17 21/32" /4" 20 25/32" /8" 20 25/32" /64" 20 25/32" /32" 20 25/32" /4" 20 25/32" /4" 22 7/8" /2" 22 7/8"

10 R22 (7/8 ) Small hole drillg R22 (7/8 ) Extension drillg tools Cross bit Flushg hole, Buttons, Angle imensions Cross bit /2" Extension rod R22 - Hex 22 - R22 Hex -22 R 22 R 22 Hex imensions ft 800 2' 7" 22 7/8" ' 11" 22 7/8" ' 3" 22 7/8" Shank adapter/shank rod, Hex 22 - R22 Hex /64" 22 7/8" R 22 Couplg sleeve, R /2" /32"

11 Small hole drillg R23 (29/32 ) Extension drillg tools R23 (29/32 ) Bits Flushg hole, Buttons, Angle imensions Bit Button bit Classification 1x4 1x6 2x7 5x /16" HMCA R48 1x6 1x6 2x7 5x /8" HMCA R48 1x6 1x6 2x7 5x /2" HMCA A-R48 1x6 1x6 2x8 5x /8" HMCA R48 Button bit 3x5 3x8 6x /4" HMCA R48 Rods imensions MF-rod, R23 - Hex 22 - R23 Hex -22 Hex ft Hex ' 10 1/2" 22 7/8" ' 22 7/8" R 23 Female end Ø 31 Shank adapter / Shank rod, Hex 22 - R23 Hex R 23 R /64" 22 7/8" ' 7" 22 7/8" ' 3" 22 7/8" ' 22 7/8" ' 22 7/8" ' 9 5/8 22 7/8" Shank adapter / Shankrod Hex 25 - R 23 Hex /64" 25 1" ' 9 " 25 1" R 23 27

12 R25 (1 ) Small hole drillg R25 (1 ) Extension drillg tools Bits Flushg hole, Buttons, Angle imensions Bit Button bit Classification 1x4 1x6 2x7 5x /8" HMCA S48 1x5 1x6 2x7 5x /8" HMCA R48 1x6 1x6 2x7 5x /2" HMCA S48 1x6 1x6 2x7 5x /2" HMCA R48 1x6 1x6 2x8 5x /8" HMCA S48 1x6 1x6 2x8 5x /8" HMCA R48 Button bit 3x4.5 3x8 6x /4" MSCFAN F-R48 Rods imensions Shank adapter / rod, Hex 22 x R25 Hex R 25 Hex ft Hex /64" 22 7/8" ' 7" 22 7/8" ' 3" 22 7/8" Extension rod, R25 - Hex 25 - R25 Hex -25 R 25 R ' 25 1" ' 25 1" ' 25 1" ' 25 1" ' 25 1" ' 25 1" Couplg sleeve, R /4" /8" For one-rod drillg 28

13 Small hole drillg Sandvik Alpha. α250 bit thread α 250 Bits Flushg hole, Buttons, Angle imensions Bit Button bit Classification 1x6 1x6 2x7 5x /2" HMCA R48 R25 (1 ) Button bit 3x4.5 3x8 6x /4" MSCFAN F-R48 Rods imensions Shank rod, Hex 25 - α250 Hex -25 Hex ft Hex ' 9 5/8 " 25 1" α250 29

14 Precision engeerg for straighter drill holes Short thread design with sturdy guides, well side the bit skirt offers higher precision collarg even complex rock formations and uneven surfaces. Rigid drill strg results straighter holes, permittg optimum drillg patterns and higher rate of advance. Exact collarg and straighter holes are prerequisites for productive drillg with less over break and lower overall costs. Hexagonal rods the tool system result a rigid, tegrated power pack drill strg with superior resistance to bendg stresses, improved bit guidance and perfect energy transfer. the drillg system. Short thread and robust guide improves service life on drifter rods with at least +30 % compared to R32 rods. NEW ESIGN PROVIES TROUBE FREE OPERATION Short, robust thread Sandvik Alpha 330 Reduced bendg stresses Easy uncouplg Advanced analysis have been used to simulate and locate critical bendg stresses of various designs to arrive at an optimally dimensioned rod / bit connection.

15 Sandvik Alpha rod / bit connections take drillg productivity to a new level Sandvik engeers are constantly engaged upgradg our tool systems. Supported by our -house manufacturg facilities, the result of their work speaks for itself, providg new profitable solutions for all rock drillg professionals. RIFTING AN TUNNEING R25 (1") BIT THREA 32 R28 (1 1/8") BIT THREA 34 R32 (1 1/4") BIT THREA 35 SANVIK APHA. α330 BIT THREA 38 R35 (1 3/8") BIT THREA 41 SANVIK EXTRA. R35 (1 3/8") BIT THREA 43 SANVIK BITS 44

16 riftg and Tunnelg R25 (1 ) bit thread R25 (1 ) Bits Flushg hole, Buttons, Angle imensions Bit Button bit, type 52 Classification 1x4,5 1x6 2x7 5x /16" HMCA C-S48 1x5 1x6 2x7 5x /8" HMCA S48 1x5 1x6 2x7 5x /16" HMCA C-S48 1x6 1x6 2x7 5x /2" HMCA S48 1x6 1x6 2x7 5x /2" MCAN R48 1x6 1x6 2x8 5x /8" HMCA S48 Cross bit 1x5 2x /8" Rods imensions rifter rod, R32 - Hex 25 - R25 Hex -25 R 32 R 25 ft ' 1 5/8" 25 1" ' 1 5/8" 25 1" ' 1 1/2" 25 1" ' 7 1/2" 25 1" ' 1 5/8" 25 1" Flushg hole Ø 8, ' 7 1/2" 25 1" Hex ' 1 5/8" 25 1" ' 11 1/2" 25' 1" ' 1 5/8" 25' 1" Couplg sleeve, R /32" /64"

17 riftg and Tunnelg R25 (1") reamg tools Reamg tools for cut holes / Pilot adapter, 6 taper Thread imensions ft R /32" R25 (1 ) Reamg tools for cut holes / Reamg bit, 6 taper Buttons, Angle imensions 4x8 8x /2" S48 4x10 8x " S48 6x10 8x /2" S48 33

18 riftg and Tunnelg R28 (1 1/8 ) bit thread R28 (1 1/8 ) Bits Flushg hole, Buttons, Angle imensions Bit Button bit, type 52 Classification 1x5 1x6 2x7 5x /16" HMCA S48 1x6 1x6 2x7 5x /2" MCAN R48 1x6 1x6 2x7 5x /2" HMCA S48 1x6 1x6 2x8 5x /8" HMCA S48 1x6 1x6 2x8 5x /16 HMCA S48 Cross bit 1x5 2x /2" Reamg tools Thread imensions Reamg tools for cut holes / Pilot adapter, 6 taper ft R /32" Reamg tools for cut holes / Reamg bit, 6 taper Buttons, Angle imensions 4x8 8x /2" S48 4x10 8x " S48 6x10 8x /2" S48 Rods imensions rifter rod, R32 - Hex 28 - R28 Flushg hole Ø 8,8 Couplg sleeve, R32 Hex -28 R 32 R 28 Hex ft ' 1 1/2" /8" ' 1 5/8" /8" ' 1 5/8" /8" ' 1 5/8" /8" ' 1 1/2" /8" /32" /64"

19 riftg and Tunnelg R32 (1 1/4 ) bit thread Bits Flushg hole, Buttons, Angle imensions Bit Button bit, type 52 Classification 1x5 2x6 2x9 5x /16" HMCVA A-S48 1x5 2x6 2x9 5x /4" HMCVA A-S48 1x6 2x7.5 2x9 5x /8" HMCVA A-S48 1x6 2x7.5 2x10 5x " HMCVA A-S48 R32 (1 1/4 ) Button bit, type 54 2x6 2x6 2x9 6x /16" MSCAN B-R48 2x6 2x6 2x9 6x /4" MSCAN B-R48 Button bit, type 53/16 3x4.5 1x4.5 3x8 6x /16" MSCAN A-R48 3x4.5 1x5 3x8 6x /4" HMCAN A-S48 3x4.5 1x5 3x8 6x /4" MSCAN A-R48 3x5 1x5 3x9 6x /8" HMCAN A-S48 3x5 1x5 3x9 6x /8" HMCAN A-R48 3x6 1x6 3x9 6x " MSCAN A-S48 3x6 1x6 3x9 6x " MSCAN A-R48 3x6 1x6 3x10 6x /4" HMCA A-S48 3x7 3x11 6x /2 HMCVA S48 Button bit, type 55 3x5.5 3x5,5 3x9 3x /4" SCFN A-C60 3x6 1x6 3x9 6x " SCFN A-C60 Button bit, type 18 4x7 5x11 8x " HMCVA S48 Cross bit 1x5 4x /4" A-42 35

20 riftg and Tunnelg R32 (1 1/4 ) bit thread R32 (1 1/4 ) Rods imensions rifter rod, R38 - Hex 35 - R32 Flushg hole Ø 9,5 rifter rod, R38 - Hex 32 - R32 Hex -35 R 38 R 32 Hex -32 R 38 R 32 Hex ft ' 1 5/8" /8" ' 1 5/8" /8" ' 1 1/2" /8" ' 1 1/2" /8" ' 1 1/2" /8" ' 1 5/8" /4" ' 1 5/8" /4" ' 1 1/2" /4" ' 1 1/2" /4" Flushg hole Ø 9,6 rifter rod, T38 - Hex 32 - R32 Hex ' 1 5/8" /4" ' 1 1/2" /4" T 38 R 32 Flushg hole Ø 9,6 rifter rod, T38 - Hex 35 - R32 Flushg hole Ø 9,5 MF rifter rod, T38 - Hex 35 - R32 Hex -35 T 38 R 32 Hex ' 1 5/8" /8" ' 1 5/8" /8" ' 1 1/2" /8" ' 1 1/2" /8" ' 1 1/2" /8" ' 1 1/2" /8" ' 1 1/2" /8" ' 1 1/2" /8" ' 1 1/2" /8" T 38 R 32 Flushg hole Ø 9,5 Couplg sleeve R /4" /32" T /2" 52 2"

21 riftg and Tunnelg R32 (1 1/4") reamg tools Pilot adapters 6, 12 taper Thread imensions Reamg tools for cut holes / Pilot adapter, 6 taper ft R /32" R32 (1 1/4 ) Reamg tools for cut holes / Pilot adapter, 12 taper R /64" Reamg bit 6, 12 taper Buttons, Angle imensions Reamg tools for cut holes / Reamg bit, 6 taper 4x8 8x /2" S48 4x10 8x " S48 6x10 8x /2" S48 Reamg tools for cut holes / Reamg bit, 12 taper 4x10 8x /2" S48 4x13 8x " S48 8x13 8x " S48 Reamg bit Flushg hole, Buttons, Angle imensions Reamg tools for cut holes / Reamg bit, R32 Pilot 4x6-3x10 12x " P-S48 37

22 riftg and Tunnelg Sandvik Alpha. α330 bit thread α 330 Bits Flushg hole, Buttons, Angle imensions Bit Button bit, type 52 Classification 1x5 1x7.5 2x9 6x /16" HMCVA A-S48 1x5 1x7.5 2x9 5x /4" HMCVA A-S48 1x6 2x7.5 2x9 5x /8" HMCVA A-S48 Button bit, type 54 2x6 2x6 2x9 6x /16" MSCAN B-R48 2x6 2x6 2x9 6x /4" MSCAN B-R48 Button bit, type 53/16 3x4.5 1x4.5 3x8 6x /16" MSCAN A-R48 3x4.5 1x5 3x8 6x /4" MSCAN A-R48 3x4.5 1x5 3x8 6x /4" HMCAN A-S48 3x5 1x5 3x9 6x /8" MSCAN A-R48 3x5 1x5 3x9 6x /8" HMCAN A-S48 3x6 1x6 3x9 6x " MSCAN A-R48 3x6 1x6 3x9 6x " HMCAN A-S48 3x7-3x11 6x /2" HMCAN S48 Button bit, type 18 4x7-5x10 8x " HMCAN S48 Button bit, Retrac 3x6-3x9 6x " HMCAN A-S48 Cross bit 1x5 4x /4" A-42 38

23 riftg and Tunnelg Sandvik Alpha. α330 bit thread Rods imensions rifter rod, T38 - Hex 35 - α330 T 38 Flushg hole Ø 9,5 rifter rod, T38 - Round 39 - α330 T 38 Hex -35 α330 α330 Hex ft ' 1 5/8" /8" ' 1 5/8" /8" ' 1 1/2" /8" ' 1 1/2" /8" ' 1 1/2" /8" ' 1 1/2" /2" ' 1 1/2" /2" ' 1 1/2" /2" ' 1 1/2" /2" α 330 Flushg hole Ø 10,3 39

24 riftg and Tunnelg Sandvik Alpha. α330 bit thread α 330 Couplg Sleeves imensions Couplg sleeve, T38 ft /2" 52 2" Reamg bit Flushg hole, Buttons, Angle imensions Reamg tools for cut holes / Reamg bit, α330 Pilot 2x6 2x6 3x10 12x " P-S48 Pilot adapter 12 taper Thread imensions Reamg tools for cut holes / Pilot adapter, 12 taper ft α /64" Reamg bit 12 taper Buttons, Angle imensions Reamg tools for cut holes / Reamg bit, 12 taper 4x10 8x /2" S48 4x13 8x " S48 8x13 8x " S48 40

25 riftg and Tunnelg R35 (1 3/8 ) bit thread Bits Flushg hole, Buttons, Angle imensions Bit Button bit, type 53/16 Classification 3x5 1x5 3x9 6x /8" HMCAN A-S48 3x5 1x5 3x9 6x /8" MSCAN A-R48 R35 (1 3/8 ) 3x6 1x6 3x9 6x " HMCAN A-S48 3x6 1x6 3x9 6x " MSCAN A-R48 Cross bit 1x5 2x /8" Rods imensions rifter rod, T38 - Hex 35 - R35 T 38 Hex -35 R 35 Hex ft ' 1 1/2" /8" ' 1 1/2" /8" ' 1 1/2" /8" Flushg hole Ø 9,5 rifter rod, T38 - Round 39 - R35 T 38 Flushg hole Ø 14,5 rifter rod, T38 - Round 39 - R35 R ' 1 1/2" /2" ' 1 1/2" /2" ' 1 1/2" /2" ' 1 1/2" /2" /2" 52 2"

26 riftg and Tunnelg R35 (1 3/8 ) bit thread R35 (1 3/8 ) Reamg bit Flushg hole, Buttons, Angle imensions Reamg tools for cut holes / Reamg bit, R35 Pilot 2x6 2x6 3x10 12x " P-S48 Pilot adapter 12 taper Thread imensions Reamg tools for cut holes / Pilot adapter, 12 taper ft R /64" Reamg bit 12 taper Buttons, Angle imensions Reamg tools for cut holes / Reamg bit, 12 taper 4x10 8x /2" S48 4x13 8x " S48 8x13 8x " S48 42

27 riftg and Tunnelg Sandvik Extra. R35 (1 3/8 ) bit thread Bits Flushg hole, Buttons, Angle imensions Bit Button bit, Retrac R35 Classification 3x6 1x5 3x9 3x /5" MSCFAN A1-R48 R35 (1 3/8 ) Rods imensions rifter rod, T35 - Round 39 - R35 T 35 R 35 ft /2" / ' 1 1/2" /2" ' 1 1/2" /2" ' 1 1/2" /2" Flushg hole Ø 14,5, Female end Ø 48,2 rifter Extension rod, T35 - Round 39 - T35 T 35 T ' /2" / / / Flushg hole Ø 14,5, Female end Ø 48,2 43

28 riftg and Tunnelg Sandvik drifter bits Sandvik bits for driftg and tunnelg are available four basic designs Type 52 esigned for maximum bit life hard and abrasive rock Type 53 All-round design with a good trade off between speed and bit life length for hard to medium hard rock Type 54 All-round design with high penetration rate for hard to medium hard rock Type 55 esigned for maximum penetration rate softer and less abrasive rock formations 44

29

30 The right solutions for creased productivity A Sandvik T35 tool system enables 54 or 57 holes to be drilled usg the same stiffer rod dimension as for T38. Sandvik GT60 enables drillg of holes down to 92. By usg a GT60 tool system when drillg the typical T51 hole size (102 ), hole straightness can be greatly improved thanks to the much stiffer and stable rod package. A drill strg with Sandvik MF-rods offers stiffer connections than a strg with separate couplg sleeves due to the 50 % reduction thread play. BENEFITS WITH SANVIK TOOS IN BENCH RIING Reduced consumption of explosives, which accounts for % of the total drillg and blastg cost. onger service life of drill steel components reducg the drillg tool cost. Improved safety better blastg control. ess downtime improved productivity. ess hole deviation which gives more well balanced fragmentation and thereby higher productivity crushers. Usg Sandvik rock tools gives a lowered total operatg cost.

31 Boosts drillg performance to make operations simpler and productive Various rock types require customized solutions to achieve straight holes. At Sandvik we have several types of specially designed drillg tools. Tools that mimize hole deviation and optimize drillg patterns. The results are improved hole straightness, superior energy transmission and higher drillg efficiency. Our -house manufacturg facilities for steel production, machg and tailorg together with our research and development gives us a competitive edge with product solutions tailored for rock drillg professionals. BENCH RIING R32 (1 1/4") 48 T35(1 3/8") 50 T38 (1 1/2") 51 T45 (1 3/4") 53 T51 (2") 55 SANVIK GT60 57

32 Bench drillg R32 (1 1/4") R32 (1 1/4 ) Bits Flushg hole, Buttons, Angle imensions Bit Button bit, regular skirt Classification 3x6 1x6 3x9 6x " HMCA A-S48 3x6 1x6 3x9 6x " MSCAN A-R48 3x6 1x6 3x10 6x /4" HMCA A-S48 3x7 3x11 6x /2 HMCVA S48 4x7 5x11 8x " HMCVA S48 3x6 1x6 3x9 6x " SCFN A-C60 3x6 1x6 3x10 6x /4" SCFN A-C60 3x8 1x8 3x10 6x /2" SCFN A-C60 Button bit, Retrac 3x6 3x9 6x " HMCFA S48 3x6 3x9 6x " MSCFAN R48 4x7 5x9 8x /2" HMCFVA S48 Cross bit 1x5 2x " HMCFA

33 Bench drillg R32 (1 1/4") Rods imensions Guide tube Bit dia. ft ' /4" R32 (1 1/4 ) R 32 Female end Ø 46 R 32 MF-rod, R32 - round 32 - R ' /4" ' /4" R 32 Flushg hole Ø 9.2. Wrench flat Female end Ø 45 Extension rod, R32 - round 32 - R32 R 32 Flushg hole Ø Wrench flat 25.4 Couplg sleeve R32 R 32 R ' /4" ' /4" ' /4" /32" /64"

34 Bench drillg T35(1 3/8") T35 (1 3/8 ) Bits Flushg hole, Buttons, Angle imensions Bit Button bit, regular skirt Classification 3x6 1x6 3x9 6x /2 HMCFVAN A-S48 Button bit, Retrac 3x6 3x9 6x /6" MSCFAN R48 3x7 3x10 6x /4" MSCFAN R48 Rods imensions MF-rod, T35 - round 39 - T35 ft ' /2" ' /2" T 35 T 35 Female end Ø 48,2. Flushg hole Ø 14,5 50

35 Bench drillg T38 (1 1/2") Bits Flushg hole, Buttons, Angle imensions Bit Button bit, regular skirt Classification 3x8 3x11 6x /2" HMCVAN S48 3x8 3x11 6x /2" MSCAN R48 T38 (1 1/2 ) 4x8 5x10 8x /4" HMCVAN S48 4X8 5x11 8x " HMCVAN S48 4X8 5x11 8x MSCAN R48 4X9 5x12 8x /2 HMCVAN S48 2x11 1x6 4x10 8x /2" HMCAN A-S48 2x11 1x6 6x10 8x HMCAN A-S48 3x8 1x8 3x10 6x /2" SCFN A-C60 4x8 1x8 4x10 8x " SCFN A-C60 Button bit, Retrac 3x8 3x11 6x /2 HMCFVAN S48 4x8 5x9 8x /2" MSCFAN R48 4x8 5x10 8x /4 HMCFVAN S48 4X8 5x11 8x HMCFVAN S48 4X8 5x11 8x MSCFAN R48 2x10 1x6 4x10 8x /2" HMCFAN A-S48 2x11 1x6 6x10 8x HMCFAN A-S48 X bit 1x7.5 2x /2"

36 Bench drillg T38 (1 1/2") T38 (1 1/2 ) Rods imensions Guide tube Hex Bit dia. ft ' /64" T 38 T 38 Female end O 56 MF-rod, T38 - round 39 - T38 T 38 T ' /2" ' /2" ' /2" Flushg hole Ø Female end O 56 Extension rod, T38 - round 39 - T ' /2" C ' /2" C-30 T 38 T 38 Flushg hole Ø Wrench flat 32 ight extension rod, T38 - Hex 32 - T ' /4" T 38 T 38 Flushg hole Ø 9.6 Couplg sleeve T /2" /32"

37 Bench drillg T45 (1 3/4") Bits Flushg hole, Buttons, Angle imensions Bit Button bit, regular skirt Classification 4x8 5x10 8x /4" HMCVAN S48 4x8 5x11 8x " HMCVAN S48 4x8 5x11 8x MSCAN R48 4x9 5x13 8x /2 HMCVAN S48 4x9 5x13 8x /2 HMCAN R48 T45 (1 3/4 ) 3x10 9x11 9x " HMCVAN S48 3x10 9x11 9x " MSCAN R48 2x12 1x7.5 6x10 8x HMCAN A-S48 3x10 1x7.5 6x10 9x /2 HMCAN A-S48 4x8 1x8 4x10 8x " SCFN A-C60 Button bit, Retrac 4x8 5x10 8x /4 MSCFAN R48 4x8 5x11 8x HMCFVAN S48 4x8 5x11 8x MSCFAN R48 4x9 5x13 8x /2 HMCFVAN S48 4x9 5x13 8x /2 MSCFAN R48 3x10 9x11 9x HMCFVAN S48 3x10 9x11 9x MSCFAN R48 2x11 1x6 6x10 8x HMCFAN A-S48 3x10 1x8 6x10 9x /2 HMCFAN A-S48 53

38 Bench drillg T45 (1 3/4") T45 (1 3/4 ) Rods imensions Guide tube Bit dia. ft ' /2" ' 76 3" T 45 T 45 Female end Ø 63 / 76 MF-rod, T45 - round 46 - T45 T 45 T ' /4" ' /4" ' /4" ' /4" Flushg hole Ø 17. Female end Ø 63 Extension rod, T45 - round 46 - T45 T 45 T ' /4" C ' /4" C ' /4" C-30 Flushg hole Ø 17 Couplg sleeve T /8" /64"

39 Bench drillg T51 (2") Bits Flushg hole, Buttons, Angle imensions Bit Button bit, regular skirt Classification 4x10 5x13 8x /2 HMCVAN S48 4x10 5x13 8x /2 MSCAN R48 T51 (2 ) 3x13 9x11 9x " MSCAN R48 3x13 9x11 9x " HMCVAN S48 3x14 10x12 9x /2" HMCVAN S48 3x14 10x13 9x " HMCVAN S48 3x12 1x8 6x10 9x /2 HMCAN A-S48 3x12 1x8 6x12 9x " HMCAN A-S48 Button bit, Retrac 4x10 5x13 8x /2 HMCFVAN S48 4x10 5x13 8x /2 MSCFAN R48 3x13 9x11 9x MSCFAN R48 3x13 9x11 9x HMCFVAN S48 3x14 10x12 9x /2 HMCFVAN R48 3x14 10x12 9x /2 HMCFVAN S48 3x14 10x13 9x HMCFVAN S48 3x12 1x8 6x10 9x /2 HMCFAN A-S48 55

40 Bench drillg T51 (2") T51 (2 ) Rods imensions Guide tube Bit dia. ft ' 76 3" ' /2" T 51 T 51 Female end Ø 76 / 87 MF-rod, T51 - round 52 - T51 T 51 T ' 52 2" ' 52 2" ' 52 2" Flushg hole Ø 21,5. Female end Ø 71 Extension rod, T51 - round 52 - T51 T 51 T ' /4" C ' /4" C ' /4" C-30 Flushg hole Ø 21.5 Couplg sleeve T /8" /64" /8" 76 3"

41 Bench drillg Sandvik GT60 Bits Flushg hole, Buttons, Angle imensions Bit Button bit, regular skirt Classification 4x11 6x12 8x /8" HMSCVA S48 4x11 6x12 8x /4" HMSCVA S48 GT60 3x14 9x11 9x " HMSCVA S48 3x14 10x12 9x /2" HMSCVA S48 3x14 10x12 9x /2 MSCFAN R48 3x14 10x14 9x " HMSCVA S48 3x14 10x14 9x /2" HMSCVA S48 3x14 12x14 9x HMSCVA S48 Button bit, Retrac 3x14 9x11 9x " HMSCFVA S48 3x14 10x12 9x /2 MSCFAN R48 3x14 10x12 9x /2" HMSCFVA S48 3x14 10x14 9x " HMSCFVA S48 3x14 10x14 9x " HMSCFVA S55 3x14 10x14 9x /2 HMSCFVA S48 3x14 12x14 9x HMSCFVA S48 2x14 9x12 9x /8" HMSCFAN S48 2x14 9x12 9x /8" MSCFAN R48 2x14 9x12 9x /4 HMSCFAN S48 2x14 9x12 9x /4 MSCFAN R48 2x14 10x12 9x " MSCFAN R48 3x13 6x13 9x /2" HMCFVA S55 57

42 Bench drillg Sandvik GT60 GT60 Rods imensions MF-rod, GT60 - round 60 - GT60. For bits from 96. GT60 Female end Ø 85. Flushg hole Ø 22,5 GT60 ft ' /8" ' /8" ' /8" ' /2" GT60 GT60 Female end Ø 85. Flushg hole Ø 25 MF-rod, GT60 - round 60 - GT60. For bits ' /8" GT60 GT60 Female end Ø 82. Flushg hole Ø 22,5 Pilot tube - GT ' /2" ' 6" 76 3" GT60 GT60 Female end Ø 85 (82 on 76 tubes) rill tube ' /2" GT60 GT60 Always use with tube shank adapter (H1500, 1560) or (H1000, 1010) 58

43

44 The power to meet every criteria A T35 equipment enables 54 or 57 holes to be drilled usg the same stiffer rod dimension as for T38. It can therefore produce straighter holes than the traditional R32 system. A drill strg with Sandvik MF-rods offers stiffer connections than a strg with separate couplg sleeves due to the 50 % reduction thread play. rillg with a stiffer rod package results improved hole straightness addition to better energy transmission and higher drillg HIÀFHQF\. Straighter holes enable easier and faster drillg and chargg. ess bendg and fatigue stresses on the drill strg also result longer tool service lives. Better blastg results terms of controlled rock IUJPHQWWRQ QG UHGXFHG UVN IRU Á\ URFN EFN EUHN QG JURXQG vibrations, as well as smoother benches, is favorable both when it comes to safety and economy.

45 Where quality counts dilution is primarily caused by deviation One of the questions coonly asked is whether it is possible to crease the output of the long hole-drillg rig. The answer is an emphatic yes. It s all to do with hole straightness and direction. Accurate placement of explosives energy will protect weak ground conditions. The ultimate reason for efficient, accurate drillg is me profitability. Hole deviation adversely effects profitability the form of poor fragmentation, low ore recovery and ore dilution. Workg with Sandvik quality tools can reduce deviation with up to 40%. ONG HOE RIING R32 (1 1/4") 62 T35 (1 3/8") 64 T38 (1 1/2") 65 T45 (1 3/4") 67 T51 (2") 69 T45 (1 3/4") TUBE RIING TOOS 71 ST58 (2 1/4") TUBE RIING TOOS 72 ST68 (2 3/4") TUBE RIING TOOS 73

46 ong hole drillg underground R32 (1 1/4") R32 (1 1/4 ) Bits Flushg hole, Buttons, Angle imensions Bit Button bit, Regular skirt Classification 3x6 1x6 3x9 6x " HMCA A-S48 3x6 1x6 3x9 6x " MSCAN A-R48 3x6 1x6 3x10 6x /4" HMCA A-S48 3x7 3x11 6x /2 HMCVA S48 4x7 5x11 8x " HMCVA S48 3x6 1x6 3x9 6x " SCFN A-C60 3x6 1x6 3x10 6x /4" SCFN A-C60 3x8 1x8 3x10 6x /2" SCFN A-C60 Button bit, Retrac skirt 3x6 3x9 6x " HMCFA S48 3x6 3x9 6x " MSCFAN R48 4x7 5x9 8x /2" HMCFVA S48 Cross bit 1x5 2x " HMCFA

47 ong hole drillg underground R32 (1 1/4") Rods imensions Guide tube Bit dia. ft ' /4" R 32 Female end Ø 46 MF-rod, R32 - round 32 - R32 R 32 R32 (1 1/4 ) 915 3' /4" ' /4" R 32 R ' /4" ' /4" Flushg hole Ø Wrench flat Female end Ø 45 Extension rod, R32 - round 32 - R32 R 32 R ' /4" ' /4" ' /4" ' /4" Flushg hole Ø Wrench flat 25.4 Couplg sleeve R /32" /64" Pilot adapter Thread imensions Pilot adapter for reamg of 51 (2 ) pilot holes ft R /8" Reamg bit Buttons, Angle imensions Bit Reamg bit Classification 4x12 8x " S48 4x12 8x S48 63

48 ong hole drillg underground T35 (1 3/8") Bits Flushg hole, Buttons, Angle imensions Bit Button bit, regular skirt Classification 3x6 1x6 3x9 6x /2 HMCFVAN A-S48 T35 (1 3/8 ) Button bit, Retrac T35 3x6 3x9 6x /6" MSCFAN R48 3x7 3x10 6x /4" MSCFAN R48 Rods imensions MF-rod, T35 - Round 39 - T35 ft ' /2" T 35 T 35 Female end Ø 48,2. Flushg hole Ø 14,5 64

49 ong hole drillg underground T38 (1 1/2") Bits Flushg hole, Buttons, Angle imensions Bit Button bit, Regular skirt Classification 3x8 3x11 6x /2" HMCVAN S48 3x8 3x11 6x /2" MSCAN R48 4x8 5x10 8x /4" HMCVAN S48 4X8 5x11 8x " HMCVAN S48 4X8 5x11 8x MSCAN R48 4X9 5x12 8x /2 HMCVAN S48 T38 (1 1/2 ) 2x11 1x6 4x10 8x /2" HMCAN A-S48 2x11 1x6 6x10 8x HMCAN A-S48 3x8 1x8 3x10 6x /2" SCFN A-C60 4x8 1x8 4x10 8x " SCFN A-C60 Button bit, Retrac skirt 3x8 3x11 6x /2 HMCFVAN S48 4x8 5x9 8x /2" MSCFAN R48 4x8 5x10 8x /4 HMCFVAN S48 4X8 5x11 8x HMCFVAN S48 4X8 5x11 8x MSCFAN R48 2x10 1x6 4x10 8x /2" HMCFAN A-S48 2x11 1x6 6x10 8x HMCFAN A-S48 X bit 1x7.5 2x /2"

50 ong hole drillg underground T38 (1 1/2") Rods imensions Guide tube Bit dia. ft ' /64" T38 (1 1/2 ) T 38 T 38 Female end O 56 MF-rod, T38 - round 39 - T38 T 38 T 38 Flushg hole Ø Female end O ' /2" C ' /2" C ' /2" C-20 Pilot adapter Thread imensions Pilot adapter for reamg of 51 (2 ) pilot holes ft R /8" Reamer Buttons, Angle imensions Bit Reamg bit Classification 4x12 8x " S48 4x12 8x S48 66

51 ong hole drillg underground T45 (1 3/4") Bits Flushg hole, Buttons, Angle imensions Bit Button bit, Regular skirt Classification 4x8 5x10 8x /4" HMCVAN S48 4x8 5x11 8x " HMCVAN S48 4x8 5x11 8x MSCAN R48 4x9 5x13 8x /2 HMCVAN S48 4x9 5x13 8x /2 HMCAN R48 T45 (1 3/4 ) 3x10 9x11 9x " HMCVAN S48 3x10 9x11 9x " MSCAN R48 2x12 1x7.5 6x10 8x HMCAN A-S48 3x10 1x7.5 6x10 9x /2 HMCAN A-S48 4x8 1x8 4x10 8x " SCFN A-C60 Button bit, Retrac skirt 4x8 5x10 8x /4 MSCFAN R48 4x8 5x11 8x HMCFVAN S48 4x8 5x11 8x MSCFAN R48 4x9 5x13 8x /2 HMCFVAN S48 4x9 5x13 8x /2 MSCFAN R48 3x10 9x11 9x HMCFVAN S48 3x10 9x11 9x MSCFAN R48 2x11 1x6 6x10 8x HMCFAN A-S48 3x10 1x8 6x10 9x /2 HMCFAN A-S48 Reamg bit 3x14 9x S48 7x14 8x S48 Pilot diameter: 64 67

52 ong hole drillg underground T45 (1 3/4") Rods imensions Guide tube Bit dia. ft ' /64" T45 (1 3/4 ) T 45 T 45 Female end Ø 63 MF-rod, T45 - round 46 - T45 T 45 T 45 Flushg hole Ø 17. Female end Ø ' /4" C ' /4" C ' /4" C-20 68

53 ong hole drillg underground T51 (2") Bits Flushg hole, Buttons, Angle imensions Bit Button bit, Regular skirt Classification 4x10 5x13 8x /2 HMCVAN S48 4x10 5x13 8x /2 MSCAN R48 T51 (2 ) 3x13 9x11 9x " MSCAN R48 3x13 9x11 9x " HMCVAN S48 3x14 10x12 9x /2" HMCVAN S48 3x14 10x13 9x " HMCVAN S48 3x12 1x8 6x10 9x /2 HMCAN A-S48 3x12 1x8 6x12 9x " HMCAN A-S48 Button bit, Retrac skirt 4x10 5x13 8x /2 HMCFVAN S48 4x10 5x13 8x /2 MSCFAN R48 3x13 9x11 9x MSCFAN R48 3x13 9x11 9x HMCFVAN S48 3x14 10x12 9x /2 HMCFVAN R48 3x14 10x12 9x /2 HMCFVAN S48 3x14 10x13 9x HMCFVAN S48 3x12 1x8 6x10 9x /2 HMCFAN A-S48 3x12 6x12 9x HMCFAN S48 Reamg bit 7x14 8x S48 Pilot diameter: 64 69

54 ong hole drillg underground T51 (2") Rods imensions Guide tube Bit dia. ft ' 76 3" T51 (2 ) T 51 T 51 Female end Ø 76 MF-rod, T51 - round 52 - T51 T 51 T 51 Flushg hole Ø Female end Ø C ' 52 2" C-20 70

55 ong hole drillg underground T45 (1 3/4") tube drillg tools Bits Flushg hole, Buttons, Angle imensions Bit XC, button bit Classification 4x7.5 6x10 8x " HMCVA R65 T45 Tube Tubes imensions rill tube, T45 - Round 65 - T45 ft ' /2" ' /2" T 45 T 45 Flushg hole Ø 18 71

56 ong hole drillg underground ST58 (2 1/4") tube drillg tools Bits Flushg hole, Buttons, Angle imensions Bit XC, button bit Classification 4x10 6x12 8x /2" HMCVA R65 ST58 Tube XC, button bit, guide retrac 4x10 6x12 8x /2" HMCVA R65 Button bit, Heavy uty 2x15 6x12 8x /2" HCV S65 Reamg bit 7x14 8x S65 Pilot diameter 76 Tubes imensions rill tube, ST58 - Round 76 - ST58 ft ' 76 3" ' 76 3" ST58 Flushg hole Ø 26 ST58 72

57 ong hole drillg underground ST68 (2 3/4") tube drillg tools Bits Flushg hole, Buttons, Angle imensions Bit XC, button bit Classification 4x10 8x12 10x " HMCVA R65 4x10 8x14 10x /2" HMCVA R65 Button bit, Heavy uty 2x15 5x14 8x " HCV S65 ST68 Tube XC, button bit, guide retrac 4x10 8x12 10x " HMCVA R65 4x10 8x14 10x /2" HMCVA R65 Collarg bit 3x18 8x16 9x " S48 Reamg bit 3x16 9x C-S65 4x14 16x " A-S65 Pilot diameter C-S65 Pilot diameter A-S65 Tubes imensions rill tube, ST68 - Round 87 - ST68 ST68 Flushg hole Ø 30 ST68 ft ' /2" ' /2" ' /2" ' /2" Permanent back flow valve. 73

58 Internal flushg consists of a water tube that fits through the center of the drill and to an o-rg seal the end of the shank to transfer flushg to the drill strg. With external flushg, holes or a slot are required the side of the shank adapter. These le up between seals side the front head or water box of the rock drill when the shank is stalled.