Small Hole Drilling. Code Instruction Integral Drill Rod Plug Hole Integral Rod Tapered Drill Rod. Tapered Button Bit. Threaded Cross Bit

Size: px

Start display at page:

Download "Small Hole Drilling. Code Instruction Integral Drill Rod Plug Hole Integral Rod Tapered Drill Rod. Tapered Button Bit. Threaded Cross Bit"

Shanon Beasley
5 years ago
Views:

4 CONTENTS Small Hole Drilling Code Instruction Integral Drill Rod Plug Hole Integral Rod Tapered Drill Rod Tapered Chisel Bit Tapered Button Bit 3/ /12 Threaded Cross Bit Threaded Cross Bit Threaded X Bits 13/14 14 Threaded Button Bits Code Instruction Button Bit Face Designs Button & Body R25/ R28/R32 Thread Bit Reaming Equipment R38 Thread Bit T38/ T45/T51 Button Bit St58 Button Bit G60 Button Bit El68 Button Bit Quality Assurance /20/21/ /27/ RODS Code Instruction Drifter Rod Bench Drilling Rod Production Drilling Rod Quality Assurance Shank Adaptor Code Instruction Shank Adaptor Shank Adaptor 36 37/38 39/ /52 53 Coupling Sleeve Code Instruction Coupling Sleeve Coupling Sleeve

5 Small Hole Drilling Code Instruction Integral Drill Rod Plug Hole Integral Rod Tapered Drill Rod Tapered Chisel Bit Tapered Button Bit 3/ /12 2Small Hole Drilling

Code Instruction INTEGRAL DRILL RODS IR 22 08-40(01) 01-Chisel Bit Type Gauge

Rod PLUG HOLE INTEGRAL RODS PID(1) 22 20-17 3 Gauge Diameter 17mm Effective Length

6 Code Instruction INTEGRAL DRILL RODS IR (01) 01-Chisel Bit Type Gauge Diameter 40mm Effective Length 800mm Hexagonal Across Flat Size 22mm Integral Drill Rod PLUG HOLE INTEGRAL RODS PID(1) Gauge Diameter 17mm Effective Length 200mm Hexagonal Across Flat Size 22mm 1-Shank mm 2-Shank mm Plug Hole Integral Rod

Code Instruction TAPER DRILL RODS TR 22 08-7 Taper Degree

Rod TAPERED CHISEL BITS B01-32-22*11 4 Taper Diameter Socket

7 Code Instruction TAPER DRILL RODS TR Taper Degree Effective Length 800mm Hexagonal Across Flat Size 22mm Tapered Rod TAPERED CHISEL BITS B *11 4 Taper Diameter Socket Diameter Gauge Diameter Face Type 01-Chisel Type 02-Cross Type Tapered Bits

8 Code Instruction TAPERED BUTTON BITS T B 32 H22 x 7 Quantity of Button Socket Diameter H22-Hexagonal 22mm H25-Hexagonal 25mm Gauge Diameter Button Bits Taper Bits 5

9 Integral Drill Rod Integral Drill Rod Plug Hole Integral Integral Steel Drill Rod Length Diameter mm in mm in Part Number Weight (kg) 800 2'7'' 40 1' 37 / 64 '' IR (01) '3'' 39 1' 17 / 32 '' IR (01) '10'' 38 1' 1 / 2 '' IR (01) '6'' 37 1' 29 / 64 '' IR (01) Shank 22mm 108mm '1'' 36 1' 27 / 64 '' IR (01) '9'' 35 1' 3 / 8 '' IR (01) '4'' 34 1' 11 / 32 '' IR (01) '7'' 34 1' 11 / 32 '' IR (01) '3'' 33 1' 19 / 64 '' IR (01) '10'' 32 1' 1 / 4 '' IR (01) 8 Shank 22mm 82.5mm '6'' 31 1' 7 / 32 '' IR (01) '1'' 30 1' 3 / 16 '' IR (01) '9'' 29 1' 9 / 64 '' IR (01)

10 Integral Drill Rod Plug Hole Integral Rod Plug Hole Integral Drill Steel Rod Length Diameter mm in mm in Part Number Weight (kg) Shank 22mm 108mm Shank 22mm 82.5mm 200 7' 7 / 8 '' ' 27 / 32 '' ' 13 / 16 '' ' 7 / 8 '' ' 27 / 32 '' ' 13 / 16 '' ' 7 / 8 '' ' 27 / 32 '' ' 13 / 16 '' ' 7 / 8 '' ' 27 / 32 '' ' 13 / 16 '' ' 7 / 8 '' ' 27 / 32 '' ' 13 / 16 '' / 32 '' PID(1) / 32 '' PID(1) / 32 '' PID(1) / 32 " PID(1) / 32 " PID(1) / 32 " PID(1) / 8 " PID(1) / 8 " PID(1) / 8 " PID(1) / 32 " PID(2) / 32 " PID(2) / 32 " PID(2) / 32 " PID(2) / 32 " PID(2) / 32 " PID(2) ' 7 / 8 '' ' 27 / 32 '' ' 13 / 16 '' 22 7 / 8 " PID(2) / 8 " PID(2) / 8 " PID(2)

11 Tapered Drill Rod Tapered Drill Rod Hex Shank Length mm in mm ft,in mm in Part Number Weight (kg) 600 2' TR '7'' TR '3'' TR '11'' TR '7'' TR / 8 '' ' 1 / 4 '' 4' 1 / 4 '' 6' '3'' TR '11'' TR '7'' TR '2'' TR '10'' TR '6'' TR '2'' TR ä10 å TR

12 Tapered Bit Tapered Bit mm Dia. in Part No. Weight (kg) / 2 " B x / 2 " B x / 8 " B x / 8 " B x / 8 " B x / 4 " B x / 4 " B x / 16 " B x / 4 " B x / 64 " B x / 32 " B x / 64 " B x / 2 " B x / 64 " B x / 32 " B x / 16 " B x / 64 " B x / 4 " B x

13 Tapered Button Bit Tapered Button Bit Taper Degree Dia. Button Flushing Hole mm in Front Gauge Front Gauge Angle ( ) Part No. Weight (kg) / 4 " 2x7 4x TB32H22x / 32 " 2x7 4x TB34H22x / 64 " 2x7 5x TB36H22x / 64 " 2x8 4x TB36H22x / 2 " 2x8 4x TB38H22x / 2 " 2x7 5x TB38H22x / 64 " 2x8 4x TB40H22x / 64 " 2x8 5x TB40H22x / 8 " 2x9 5x TB48H22x / 4 " 2x7 5x TB32H22x / 64 " 1x8 3x TB36H22x / 64 " 2x7 5x TB36H22x / 2 " 1x8 3x TB38H22x / 2 " 2x7 5x TB38H22x / 8 " 1x8 3x TB41H22x / 8 " 2x8 5x TB41H22x / 32 " 1x9 3x TB42H22x / 16 " 1x9 3x TB43H22x / 16 " 2x8 5x TB43H22x / 4 " 1x10 3x TB45H22x / 4 " 2x9 5x TB45H22x

14 Tapered Button Bit Tapered Button Bit Taper Degree Dia. Button Flushing Hole mm in Front Gauge Front Gauge Angle ( ) Part No. Weight (kg) / 4 " 1x7 3x TB32H22x / 4 " 2x7 4x TB32H22x / 2 " 2x7 4x TB34H22x / 64 " 2x8 4x TB36H22x / 64 " 2x7 5x TB36H22x / 2 " 1x9 3x TB38H22v / 2 " 2x8 5x TB38H22x / 2 " 2x8 4x TB38H22x / 64 " 2x8 4x TB40H22x / 64 " 1x9 3x TB40H22x / 8 " 2x7 5x TB41H22x / 32 " 2x7 5x TB42H22x / 16 " 2x7 5x TB43H22x / 4 " 2x9 5x TB45H22x

15 Tapered Button Bit Tapered Button Bit Taper Degree Dia. Button Flushing Hole mm in Front Gauge Front Gauge Angle ( ) Part No. Weight (kg) / 64 " 2x7 6x TB36H22x / 2 " 2x8 6x TB38H22x / 8 " 2x8 6x TB41H22x / 16 " 2x8 6x TB43H22x / 4 " 2x9 6x TB45H22x / 8 " 1x7 3x TB29H22x / 16 " 1x7 3x TB30H22x / 4 " 2x7 5x TB32H22x / 4 " 2x7 4x TB32H22x / 4 " 2x7 6x TB32H22x / 8 " 2x7 4x TB34H22x / 8 " 2x7 5x TB34H22x / 8 " 2x7 6x TB34H22x / 64 " 2x8 4x TB36H22x / 64 " 2x7 5x TB36H22x / 64 " 2x7 6x TB36H22x / 2 " 2x8 4x TB38H22x / 2 " 2x8 5x TB38H22x / 2 " 2x7 6x TB38H22x / 64 " 2x8 4x TB40H22x / 64 " 2x8 6x TB40H22x / 8 " 2x8 5x TB41H22x / 32 " 2x8 6x TB42H22x / 16 " 2x8 5x TB43H22x / 4 " 2x9 6x TB44H22x / 4 " 2x9 5x TB45H22x

Threaded Cross Bit B02-35-R25 Thread Type Gauge Diameter Face Type 01-X Type 02-Cross Type Threaded Bits Threaded Cross Bit Dia. Insert Flushing Hole mm in Width mm Height mm Centre Gauge Part No.

16 Threaded Cross Bit B02-35-R25 Thread Type Gauge Diameter Face Type 01-X Type 02-Cross Type Threaded Bits Threaded Cross Bit Dia. Insert Flushing Hole mm in Width mm Height mm Centre Gauge Part No. Weight (kg) R25 Thread / 8 " B02-35-R / 2 " B02-38-R / 8 " B02-41-R / 4 " B02-45-R / 8 " B02-48-R " B02-51-R R28 Thread / 2 " B02-38-R / 8 " B02-41-R / 4 " B02-45-R / 8 " B02-48-R " B02-51-R28 1.1

17 Threaded X Bits Threaded Cross Bit Dia. Insert Flushing Hole mm in Width mm Height mm Centre Gauge Part No. Weight (kg) T38 Thread R32 Thread retrac skirt / 16 2 "" BR02-64-T38 B02-43-R " 3 / 4 " BR02-76-T38 B02-45-R / 8 " 14 T45 Thread 22 retrac1 skirt 4 B02-48-R " 3" BR02-76-T45 B02-51-R / 42 " BR02-89-T45 B02-57-R / 2 " B02-64-R32 2 T38 Thread / 2 " B02-64-T " B02-76-T T45 Thread 76 3" B02-76-T / 2 " B02-89-T Threaded X Bit 14 Dia. Insert Flushing Hole mm in Width mm Height mm Centre Gauge Part No. Weight (kg) T38 Thread retrac skirt / 2 " BR01-64-T38 2,3 76 3" BR01-76-T38 2,9 T45 Thread retrac skirt 76 3" BR01-76-T45 2, / 2 " BR01-89-T45 3,5

Extension Drilling Tools 15 Threaded Button Bits Code Instruction Button Bit Face Designs Button & Body R25/ R28/R32 Thread Bit Reaming Equipment

18 Extension Drilling Tools 15 Threaded Button Bits Code Instruction Button Bit Face Designs Button & Body R25/ R28/R32 Thread Bit Reaming Equipment R38 Thread Bit T38/ T45/T51 Button Bit St58 Button Bit G60 Button Bit El68 Button Bit Quality Assurance /20/21/ /27/

Code Instruction THREADED BUTTON BITS BDR 120 T51 A Retrac Body Drop Center Thread Type Gauge Diameter Rock Formation S-Soft A-Medium Hard to Hard Extremely Hard M-Abrasive

19 Code Instruction THREADED BUTTON BITS BDR 120 T51 A Retrac Body Drop Center Thread Type Gauge Diameter Rock Formation S-Soft A-Medium Hard to Hard Extremely Hard M-Abrasive Button Bits Rock hardness Drifting and tunnelling Bech Drilling and Production Drilling S, A, H, Rock abrasiveness + Rock hardness RS,S RA,A RH,H Rock abrasiveness + 16

Button Bit Face Designs Button Bit Face Designs 17 Standard button bit Soft rock button bit Heavy duty button bit General purpose button bit, for use in medium to hard

Compared with standard button bit,it normally has these characteristics: smaller button, bigger flushing hole and groove, better wear resistance, drop center, parabolic or

Compared with standard button bit, it normally has these characteristics: more buttons, bigger button, better impact resistance and wear resistance, spherical or

Retrac skirt button bit The Retrac skirt button bit has cutting edges at the rear of the bit, which facilitates the bit removal from the hole.

20 Button Bit Face Designs Button Bit Face Designs 17 Standard button bit Soft rock button bit Heavy duty button bit General purpose button bit, for use in medium to hard rock ( Rock hardness MPa). It normally has these characteristics: Flat face, parabolic or hemispherical button. For use in soft rock ( Rock hardness < 150MPa). Compared with standard button bit,it normally has these characteristics: smaller button, bigger flushing hole and groove, better wear resistance, drop center, parabolic or ballistic button. For use in extremely hard and abrasive rock ( Rock hardness > 250MPa). Compared with standard button bit, it normally has these characteristics: more buttons, bigger button, better impact resistance and wear resistance, spherical or hemispherical button. Because of more buttons, its cost is higher than that of standard button bit. Retrac skirt button bit The Retrac skirt button bit has cutting edges at the rear of the bit, which facilitates the bit removal from the hole. This is an important feature when drilling in loose, broken or fissured rock, where it can be difficult to retract the drill string due to hole collapse. In addition, the Retrac skirt button bit has deep grooves milled along the bit body for efficient cutting removal. The good guidance of this bit gives straighter holes.1-3 designs of bit are available in a retrac skirt.

21 Button & Body Button Bit Insert Types Ballistic Bullet shaped, very aggressive fast penetration in soft to medium consistent rock. Parabolic Hemispherical Semi-ballistic shaped, more aggressive than the spherical carbides, for use in soft to medium consistent rock. Hemispherical shaped, more aggressive than the spherical button, for use in medium to hard rock, with fractured or seamy applications Spherical For use in medium to hard rock, with fractured or seamy applications. 18 Conical For use in soft to medium rock hardness, moreaggressive with faster penetration rates. NOTE: Generally, the larger the number of gauge buttons the better overall performance, especially in hard rock.

22 R25 Thread Bit R25 Thread Bit DiaMETER Button Flushing Hole mm in Front Gauge Front Gauge Angle ( ) Part No. Weight (kg) mm normal body / 2 " 2x7 4x B38R25S / 2 " 2x7 5x B38R25H 0.48 S / 2 " 3x7 6x B38R25A / 8 " 2x7 4x B41R25S / 8 " 2x8 5x B41R25H 0.52 H / 8 " 3x7 6x B41R25A / 16 " 2x8 4x B43R25S / 16 " 2x8 5x B43R25H 0.57 A / 16 " 3x8 6x B43R25A / 4 " 2x9 4x B45R25S / 4 " 2x9 5x B45R25H / 4 " 3x8 6x B45R25A

23 R28 Thread Bit R28 Thread Bit Dia. Button Flushing Hole mm in Front Gauge Front Gauge Angle ( ) Part No. Weight (kg) mm normal body /2" 2x7 4x B38R28S /2" 2x8 5x B38R28H 0.48 S /2" 2x7 6x B38R28A /8" 2x8 4x B41R28S /8" 2x9 5x B41R28H 0.55 H /8" 2x7 6x B41R28A /8" 2x9 4x B41R28S /4" 2x9 5x B45R28H 0.6 A /4" 3x8 6x B45R28A " 2x9 4x B51R28S " 2x10 5x B51R28H " 3x8 6x B51R28A

R32 Thread Bit R32 Thread Bit Dia. Button Flushing Hole mm in Front Gauge Front Gauge Angle ( ) Part No.

6 41 1 5 / 8 " 2x8 5x9 1 2 30 B41R32H 0.63 41 1 5 / 8 " 3x7 6x8 3 1 30 B41R32A 0.

7 43 1 11 / 16 " 3x7 6x9 3 1 30 B43R32A 0.7 H 45 1 3 / 4 " 2x9 4x10 1 2 30 B45R32S 0.

78 A 48 1 7 / 8 " 2x9 4x11 1 2 30 B48R32S 0.8 48 1 7 / 8 " 2x10 5x11 1 2 30 B48R32H 0.

24 R32 Thread Bit R32 Thread Bit Dia. Button Flushing Hole mm in Front Gauge Front Gauge Angle ( ) Part No. Weight (kg) mm normal body / 8 " 2x7 4x B41R32S / 8 " 2x8 5x B41R32H / 8 " 3x7 6x B41R32A 0.63 S / 16 " 2x8 4x B43R32S / 16 " 2x8 5x B43R32H / 16 " 3x7 6x B43R32A 0.7 H / 4 " 2x9 4x B45R32S / 4 " 2x9 5x B45R32H / 4 " 3x8 6x B45R32A 0.78 A / 8 " 2x9 4x B48R32S / 8 " 2x10 5x B48R32H 0.85 A / 8 " 3x8 6x B48R32A " 2x9 4x B51R32S " 2x10 5x B51R32H " 3x9 6x B51R32A mm retrac body 51 2" 3x9 6x BR51R32A " 3x10 6x BR57R32A 1.3

25 R32 Thread Bit R32 Thread Bit Dia. Button Flushing Hole mm in Front Gauge Front Gauge Angle ( ) Part No. Weight (kg) 58 64mm normal body S H / 25 " 3x9 1x7 6x BD58R32S / 25 " 3x10 6x B58R32H / 25 " 3x10 6x B58R32A / 2 3x10 1x x B64R32S / 2 3x11 6x B64R32H 2 A / 2 3x10 6x B64R32A 2 64mm retrac body x10 / 2 6x B64R32S 2.7 1x / 2 3x11 6x BR64R32H / 2 3x10 6x BR64R32A

Reaming Equipment Reaming Equipment Dia.

4 89 3 1/2" Rb02-89 2 64 2 1/2" RBN8-64 0.

8 102 4" RBN8-102 2 35 1 3/8" 250 RP35-R25 1.

26 Reaming Equipment Reaming Equipment Dia. Length Lenth mm in mm Part No. Weight (kg) /32" 300 RP26-R /32" 300 RP26-R /32" 300 RP26-R /2" RB " RB /2" Rb /2" RBN " RBN /2" RBN " RBN /8" 250 RP35-R /2" 250 RP38-R /64" 250 RP40-R " RBN /2" RBN " RBN " RB102-T

27 R38 Thread Bit R38 Thread Bit Dia. Button Flushing Hole mm in Front Gauge Front Gauge Angle ( ) Part No. Weight (kg) 64mm normal body S /2 3x10 1x8 6x B64R38S /2" 3x11 6x B64R38H 2 H A /2" 3x10 6x B64R38A 2 64mm retrac body /2 3x10 1x8 6x B64R38S /2" 3x11 6x BR64R38H /2" 3x10 6x BR64R38A mm normal body S 76 3" 4x10 6x B76R38S " 4x12 8x B76R38H 2.4 H A 76 3" 3*11 6* B76R38A mm retrc body 76 3" 4x10 6x BR76R38S " 4x12 8x BR76R38H " 3x11 6x BR76R38A

28 T38 Thread Bit T38 Thread Bit Dia. Button Flushing Hole mm in Front Gauge Front Gauge Angle ( ) Part No. Weight(kg) 64mm normal body S /2 3x10 1x7 6x B64T38S /2 3x11 6x B64T38H 2 H A /2 3x10 6x B64T38A 2 64mm retrac body /2 3x10 1x7 6x BR64T38S /2 3x11 6x BR64T38H /2 3x10 6x BR64T38A mm normal body S 76 3" 4x10 6x B76T38S " 8x12 4x B76T38H 3.3 H A 76 3" 3x11 6x B76T38A mm retrc body 76 3" 4x11 6x BR76T38S " 8x12 4x BR76T38H " 3*11 6* BR76T38A 3.5

29 T38 Thread Bit Dia. Button Flushing Hole mm in Front Gauge Front Gauge Angle ( ) Part No. Weight(kg) 89mm normal body S / 2 " 5x11 8x B89T38S / 2 " 5x12 8x B89T38H 3.3 H A / 2 " 5x12 8x B89T38A mm retrc body / 2 " 5x11 8x BR89T38S / 2 " 5x12 8x BR89T38H / 2 " 5x12 8x BR89T38A T38 Thread Bit

30 T45 Thread Bit T45 Thread Bit Dia. Button Flushing Hole mm in Front Gauge Front Gauge Angle ( ) Part No. Weight( kg) 76mm normal body S 76 3" 4x11 6x B76T45S " 8x12 4x B76T45H 2. 4 H A 76 3" 3x11 6x B76T45A mm retrc body 76 3" 4x11 6x BR76T45S " 8x12 4x BR76T45H " 3x11 6x BR76T45A mm normal body S / 2 " 8x12 5x B89T45S / 2 " 8x13 5x B89T45H 3.3 H A / 2 " 5x12 8x B89T45A mm retrc body / 2 " 8x12 5x BR89T45S / 2 " 8x13 5x BR89T45H / 2 " 5x12 8x BR89T45A 5.2

31 T45 Thread Bit T45 Thread Bit Dia. Button Flushing Hole mm in Front Gauge Front Gauge Angle ( ) Part No. Weight( kg) 102mm normal body S 102 4" 6x12 8x B102T45S " 6x12 8x B102T45H 4.8 H A 102 4" 4X13+3x11 8x B102T45A mm retrac body 102 4" 6x12 8x BR102T45S " 6x12 8x BR102T45H " 4X13+3x11 8x BR102T45A

32 T51 Thread Bit T51 Thread Bit Dia. Button Flushing Hole mm in Front Gauge Front Guage Angle ( ) Part No. Weight(kg) 89mm normal body S / 2 " 5x11 8x B89T51S / 2 " 5x12 8x B89T51H 4.3 H A / 2 " 5x12 8x B89T51A mm retrc body / 2 " 5x11 8x BR89T51S / 2 " 5x12 8x BR89T51H / 2 " 5x12 8x BR89T51A mm normal body S 102 4" 6x12 8x B102T51S " 6x12 8x B102T51H 5.2 H A 102 4" 7x12 8x B102T51A mm retrac body 102 4" 6x12 8x BR102T51S " 6x12 8x BR102T51H " 7x12 8x BR102T51A 7

33 T51 Thread Bit T51 Thread Bit Dia. Button Flushing Hole mm in Front Gauge Front Guage Angle ( ) Part No. Weight(kg) 115mm normal body S H / 2 " 7x13 8x B115T51S / 2 " 6x13 9x B115T51H / 2 " 7x13 8x B115T51A 7.3 A 115mm retrac body / 2 " 7x13 8x BR115T51S / 2 " 6x13 9x BR115T51H / 2 " 7x13 8x BR115T51A mm normal body S H 127 5" 4x14+3x 12 8x B127T51S " 8x14 9x B127T51H " 7x14 8x B127T51A 8.5 A 127mm retrac body 127 5" 4x14+3x 12 8x BR127T51S " 8x14 9x BR127T51H " 7x14 8x BR127T51A

34 St58 Thread Bit St58 Thread Bit Dia. Button Flushing Hole Angle ( ) mm in Front Gauge Front Gauge Part No. Weight(kg) normal body 102 4" 6x12 8x B102ST58S " 6x12 8x B102ST58H " 7x12 8x B102ST58A / 2 " 7x13 8x B115ST58S 7. 1 S / 2 " 6x13 9x B115ST58H / 2 " 7x13 8x B115ST58A " 7x13 8x B127ST58S 8. 5 H 127 5" 6x13 9x B127ST58H " 7x14 8x B127ST58A 8. 5 retrac body A 102 4" 6x12 8x BR102ST58S " 6x12 8x BR102ST58H " 7x14 8x BR102ST58A / 2 " 7x13 8x BR11ST58S / 2 " 6x13 9x BR115ST58H / 2 " 7x13 8x BR115ST58A " 7x13 8x BR127ST58S " 6x13 9x BR127G60H " 7x14 8x BR127ST58A 12.1

35 G60 Thread Bit G60 Thread Bit Dia. Button Flushing Hole mm in Front Gauge Front Gauge Angle ( ) Part No. Weight (kg) normal body 102 4" 6x12 8x B102G60S " 6x12 8x B102G60H " 7x12 8x B102G60A / 2 " 7x13 8x B115G60S 9.1 S / 2 " 6x13 9x B115G60H / 2 " 7x13 8x B115G60A " 7x13 8x B127G60S 10.3 H 127 5" 6x14 9x B127G60H " 7x14 8x B127G60A 10.3 retrac body A 102 4" 6x12 8x BR102G60S " 6x12 8x BR102G60H " 7x14 8x BR102G60A / 2 " 7x13 8x BR115G60S / 2 " 6x13 9x BR115G60H / 2 " 7x13 8x BR115G60A " 7x13 8x BR127G60S " 6x14 9x BR127G60H " 7x14 8x BR127G60A 13.5

El68 Thread Bit El68 Thread Bit Dia. Button Flushing Hole mm in Front Gauge Front Gauge Angle ( ) Part No. Weight( kg) normal body 115 4 1 / 2 " 7x13 8x14 4 0 40 B115EL68S 9.

36 El68 Thread Bit El68 Thread Bit Dia. Button Flushing Hole mm in Front Gauge Front Gauge Angle ( ) Part No. Weight( kg) normal body / 2 " 7x13 8x B115EL68S / 2 " 6x13 9x B115EL68H 9.1 S / 2 " 7x13 8x B115EL68A " 7x13 8x B127EL68S 10.3 H 127 5" 6x14 9x B127EL68H " 7x14 8x B127EL68A 10.3 retrac body A / 2 " 7x13 8x BR115EL68S / 2 " 6x13 9x BR115EL68H / 2 " 7x13 8x BR115EL68A " 7x13 8x BR127EL68S " 6x14 9x BR127EL68H " 7x14 8x BR127EL68A

37 Quality Assurance Warranty Conditions and Procedures of Claim Settlement (Threaded Button Bit) In order to make customers familiar with our warranty and claim settlement, we indicate the conditions and procedures in details as below. 1. Full compensation for the following two situations: a. Steel body breakage when lifespan of the bit used is less than 1/3 of its normal in comparison to the average lifetime of JSI bits delivered to the same client under the same working condition. b. Carbide button breakage or popping-out when the wearing of the button is less than 1/7 of its original height out of the steel body. 2. Partial compensation for the following conditions: Steel body breakage or Carbide button breakage or popping out when lifespan of the bit used is between 1/3 and 1/2 of its normal in comparison to the average lifetime of JSI bits delivered to the same client under the same working condition, JSI will provide partial compensation. 3. In principle, compensation will not be made for pure fracturing of carbide button as the reasons resulting to fracturing are complicated (such as improper operation, drilling concrete with steel wire rods). 4. Generally compensation will not be made for breaking & cracking of steel body and breaking & dropping-out of carbides under the condition that they have been over worn-out. 5. Reasonable compensation shall be made in accordance with the degree of wearing of the threads and buttons, if the bit body or carbide is broken, fractured or drops out under the condition of being used in weathered rock, limestone or other soft rocks. 6. Should the same problem occur for initial bits out of any bulk order when customer starts using the bits (i.e. first five pieces of bits prematurely damaged in the same way), please contact us or your suppliers immediately and stop using the remaining products, we will provide timely service and settlement (such as replacing the bits). Otherwise, we will not bear the responsibility. 7. Procedure: should the above-mentioned situations take place, please send the damaged bits in time to our technical department. Our reply shall be given in one week in compliance with our service commitment and handling standard. Distributor or Agent must offer written quality problem report issued by end-user for return shipment of goods. 8. In case other disputes happen, please send the remains of the drill bits to our company, and we both parties shall solve the issue by friendly negotiation. 9. Limitation on Liability. Except as provided for herein, in no event will JSI be liable for any indirect,incidental, special, consequential, punitive or similar damages including, but not limited to, lost profits, loss of data or business interruption losses. In no event will the total, aggregate liability of JSI under the Contract exceed the value of the Contract under which liability is claimed. The liability limitations shall apply even if JSI has been notified of the possibility or likelihood of such damages occurring and regardless of the form of action, whether in contract, negligence, strict liability, tort, products liability or otherwise. The parties agree that these limits of liability shall survive and continue in full force and effect despite any termination or expiration of any Contract. Any action by Purchaser against JSI must be commenced within one year after the cause of action has accrued. No employee or agent of JSI is authorized to make any warranty other than that which is specifically set forth herein. The provisions in any specification, brochure or chart issued by JSI are descriptive and are not warranties. 34

38 RODS 35 RODS Code Instruction Drlfter Rod Bench Drilling Rod Production Drilling Rod Quality Assurance 36 37/38 39/

MF-Rods EXTENSION RODS EH35-30-R32/R38 36 Rod Diameter-35mm Cross-Section Shape H-Hexagonal

39 Code Instruction MF RODS MR45-15-T45/T45 Cross-Section Shape H-Hexagonal R-Round One End With T45 Thread The Other End With T45 Female Thread Total Length -1525mm Rod Diameter-46mm MF-Rods EXTENSION RODS EH35-30-R32/R38 36 Rod Diameter-35mm Cross-Section Shape H-Hexagonal R-Round One End With R38 Thread The Other End With R32 Thread Total Length-3050mm Extension Rods

40 Drifter Rod DRIFTER ROD Drifter rod,r32-hex25-r25 Length Diameter Part No. Weight(kg) mm ft mm in '10 5 / 8 " 25 1" EH25-21-R25/R Drifter rod,r32-hex28-r28 Drifter rod, R38 - Hex 32 - R '2 5 / 8 " 25 1" EH25-22-R25/R '10 1 / 2 " 25 1" EH25-24-R25/R '6 3 / 8 " 25 1" EH25-26-R25/R '2 1 / 4 " 25 1" EH25-28-R25/R '1 5 / 8 " 25 1" EH25-31-R25/R '10 1 / 2 " / 8 " EH28-24-R28/R '6 3 / 8 " / 8 " EH28-26-R28/R ' / 8 " EH28-30-R28/R ' / 8 " EH28-37-R28/R '1 1 / 2 " / 8 " EH28-40-R28/R ' / 8 " EH28-43-R28/R ' / 8 " EH32-30R32/R ' / 4 " EH32-37R32/R ' / 4 " EH32-43R32/R ' / 4 " EH32-49R32/R

41 DRIFTER ROD Drifter rod, R38 - Hex 35 - R32 Length Diameter Part No. Weight(kg) mm ft mm in ' / 8 " EH35-30R32/R ' / 8 " EH35-37R32/R ' / 8 " EH35-43R32/R ' / 8 " EH35-49R32/R ' / 8 " EH35-55R32/R Drifterrod,T38-Hex35-R ' / 8 " EH35-37R32/T38 29 MF Drifter rod,, T38 - Hex 35 - R ' / 8 " EH35-43R32/T ' / 8 " EH35-49R32/T ' / 8 " EH35-55R32/T ' / 8 " EH35-60R32/T ' / 8 " MH35-37MT38/FR ' / 8 " MH35-43MT38/FR ' / 8 " MH35-49MT38/FR ' / 8 " MH35-55MT38/FR ' / 8 " EH35-60-MT38/FR Drifter Rod

42 Bench Drilling Rod BENCH DRILLING ROD Extension rod, R32 - Round 32 - R32 Length Diameter Part No. Weight(kg) mm ft mm in ' / 4 " ER32-24R32/R ' / 4 " ER32-30R32/R ' / 4 " ER32-36R32/R Extension rod, MR32 - Round 32 - FR ' / 4 " MR32-30R32/R ' / 4 " MR32-36R32/R / 4 " MR32-42R32/R32 25 Extension rod, R38 - Round 39 - R ' / 32 " ER39-30R38/R ' / 32 " ER39-36R38/R ' / 32 " ER39-43R38/R MF rod,mr38 - Round39 - R ' / 32 " MR39-30MR38/FR ' / 32 " MR39-36MR38/FR ' / 32 " MR39-43MR38/FR Extension rod, T38 - Round 39 - T ' / 32 " ER39-30T38/T ' / 32 " ER39-36T38/T ' / 32 " ER39-43T38/T

43 Bench Drilling Rod BENCH DRILLING ROD MF rod, MT38 - Round 39 - FT38 Length Diameter Part No. Weight(kg) mm ft mm in ' / 32 " MR39-30MT38/FT ' / 32 " MR39-36MT38/FT ' / 32 " MR39-43MT38/FT Extension rod, T45 - Round 46 - T ' / 4 " ER46-30T45/T ' / 4 " ER46-36T45/T ' / 4 " ER46-42T45/T / 4 " ER46-60T45/T MF-rod, T45 - Round 46 - T ' / 4 " MR46-30MT45/FT ' / 4 " MR46-M36T45/FT ' / 4 " MR46-42MT45/FT ' / 4 " MR46-60MT45/FT Extension rod, T51 - Round 52 - T ' 52 2" ER52-36T51/T ' 52 2" ER52-42T51/T ' 52 2" ER52-60T51/T51 91 MF-rod, T51 - Round 52 - T ' 52 2" MR52-36T51/T ' 52 2" MR52-42T51/T ' 52 2" MR52-60T51/T

44 Production Drilling Rod PRODUCTION DRILLING ROD Extension rod, R32 - Round 32 - R32 Length Diameter Part No. Weight(kg) mm ft mm in 915 3' / 4 " ER32-09R32/R ' / 4 " ER32-12R32/R ' / 4 " ER32-15R32/R ' / 4 " ER32-18R32/R MF ROD MR32- Round 32-FR ' / 4 " MR32-09R32/R ' / 4 " MR32-12R32/R ' / 4 " MR32-15R32/R ' / 4 " MR32-18R32/R Extension rod, T38 - Round 39 - T ' / 32 " ER39-12T38/T ' / 32 " ER39-15T38/T ' / 32 " ER39-18T38/T MF ROD MT38- Round 39-FT ' / 32 " MR39-12MT38/FT ' / 32 " MR39-15MT38/FT ' / 32 " MR39-18MT38/FT MF ROD MT45- Round 45-FT45 MF ROD MT51- Round 52-FT ' / 4 " MR46-15MT45/FT ' / 4 " MR46-18MT45/FT ' 52 2 MR52-15MT51/FT ' 52 2 MR52-18MT51/FT

45 Warranty Conditions and Procedures of Claim Settlement (Extension rod) In order to make customers familiar with our warranty and claim settlement, we indicate the conditions and procedures in details as below. 1. Full compensation shall be made as following condition: Rod breakage when lifespan of the rod used is less than 1/3 of its normal in comparison to the average lifetime of batch rods or samples which JSI delivered to the same client under the same working condition (same rock, same drilling machine and same driller). 2. Partial compensation shall be made in accordance with wear rate of rod thread when the rod is used in weathered rock, limestone or other soft rocks and broken. 3. Generally, compensation shall not be made for breakage of rod, of which the thread is worn seriously. 4. Should the same problem occur for initial rods out of any bulk order when customer starts using the rods (i.e. first two pieces of rods prematurely damaged in the same way), please contact us or your suppliers immediately and stop using the remaining products, we will provide timely service and settlement (such as replacing the rods). Otherwise, we will not bear the responsibility. 5. Procedure: should the above-mentioned situations take place, please send the damaged rods in time to our technical department. Our reply shall be given in one week in compliance with our service commitment and handling standard. Distributor or Agent must offer written quality problem report issued by end-user for return shipment of goods. 6. In case other disputes happen, please send the remains of drill rods to our company, and we both parties shall solve the issue by friendly negotiation. 7. Limitation on Liability. Except as provided for herein, in no event will JSI be liable for any indirect,incidental, special, consequential, punitive or similar damages including, but not limited to, lost profits, loss of data or business interruption losses. In no event will the total, aggregate liability of JSI under the Contract exceed the value of the Contract under which liability is claimed. The liability limitations shall apply even if JSI has been notified of the possibility or likelihood of such damages occurring and regardless of the form of action, whether in contract, negligence, strict liability, tort, products liability or otherwise. The parties agree that these limits of liability shall survive and continue in full force and effect despite any termination or expiration of any Contract. Any action by Purchaser against JSI must be commenced within one year after the cause of action has accrued. No employee or agent of JSI is authorized to make any warranty other than that which is specifically set forth herein. The provisions in any specification, brochure or chart issued by JSI are descriptive and are not warranties. 42Quality Assurance

46 Shank Adaptor 43 Shank Adaptor Code Instruction Shank Adaptor Shank Adaptor 44 45/52 53

SHANK ADAPTOR SKT45-600-HL600 Rock drill or Drifter Total

47 SHANK ADAPTOR SKT HL600 Rock drill or Drifter Total Length 600mm Thread Type Shank Adaptor 44Code Instruction

48 Shank Adaptor SHANK ADAPTOR Part No. Rock drill or Drifter Sandvik Part No. Length mm Diameter mm Thread SANDVIK TAMROCK SKR HL300 HL300 Female ,83 R28 SKR HL300 HL ,83 R32 SKR HL538 HLR438LS/HL ,91 R32 SKR HL538 HLR438LS/HL ,91 R38 SKT HL538 HLR438LS/HL ,91 T38 SKT HL538 HLR438LS/HL ,91 T38 SKR HL500S HL500S ,82 R32 SKT HL500S HL500S ,82 T38 SKR HL500S HL500S ,82 R38 SKR HL500 HL ,82 R32 SKT HL500 HL ,82 T38 SKR HL500 HL ,82 R38 SKT HL550S HL550S ,85 T38 45 SKT HL550S HL550S ,85 T45

49 Shank Adaptor SHANK ADAPTOR Part No. Rock drill or Drifter Sandvik Part No. Length mm Diameter mm Thread SANDVIK TAMROCK SKR HL600 HL R32 SKT HL600 HL ,77 T38 SKT HL600 HL ,77 T45 SKT HL600 HL ,77 T51 SKR HL600S HL600S ,77 R32 SKT HL600S HL600S ,77 T38 SKR HL600S HL600S ,77 R38 SKT HL600S HL600S ,77 T45 SKT HL600S HL645S ,75 T45 SKT HL700 HL ,7 T45 SKT HL700 HL ,7 T51 SKT HL850 HL ,8 T45 SKT HL850 HL ,8 T51 SKT HL850S HL850S ,8 T45 46 SKT HL850S HL850S ,8 T51 SKT HL1000 HL ,73 T45 SKT HL1000 HL ,73 T51 SKT HL1500 HL ,73 T51 SKT HLX5 HLX ,82 T38 SKR HLX5 HLX ,82 R38

50 Shank Adaptor SHANK ADAPTOR Part No. Rock drill or Drifter Sandvik Part No. Length mm Diameter mm Thread ATLAS COPCO SKR BBC42 BBC R32 SKR BBC43 BBC43/44/45/ R32 SKR BBC51 BBC51/52/54/ R32 SKT BBE56 BBE56/42/57/ ,26 T38 SKR BBE56 BBE56/42/57/ ,26 R38 SKR COP1032 COP1032 HD F ,92 R32 SKR COP1032 COP1032 HD R38 SKR COP1032 COP1032 HD R32 SKR COP1032 COP1032 LE R28 SKR COP1032 COP1032 LE R32 SKR COP1036 COP1036/1038HB ,91 R32 SKT COP1036 COP1036/1038HB ,91 T38 SKT COP1036 COP1036/1038HB ,91 T38 47 SKT COP1036 COP1036/1038HB ,87 T45 SKR COP1038 COP1038 HD ,91 R32 SKR COP1038 COP1038 HD ,91 R38 SKT COP1038 COP1038 HD ,91 T38

51 Shank Adaptor SHANK ADAPTOR Part No. Rock drill or Drifter Sandvik Part No. Length mm Diameter mm Thread ATLAS COPCO SKR COP1038HL COP1038 HL ,91 R32 SKT COP1038HL COP1038 HL ,91 T38 SKT COP1038HL COP1038 HL ,87 T45 SKT COP1238 COP ,91 T38 SKT COP1238B COP ,87 T38 SKT COP1238 COP ,87 T38 SKR COP125 COP 125/130/ ,66 R32 SKT COP125 COP 125/130/ ,66 T38 SKT COP1440 COP ,1 T38 SKR COP1440 COP ,91 R38 SKT COP1440 COP ,94 T38 SKT COP1440 COP ,94 T45 SKT COP1440 COP ,94 T51 SKT COP1838 COP1550/1838HO/ME/HE ,94 T38 48 SKT COP1838 COP1550/1838HO/ME/HE ,94 T45 SKT COP1838 COP1550/1838HO/ME/HE ,94 T51 SKT COP1850 COP ,94 T51

52 Shank Adaptor SHANK ADAPTOR Part No. Rock drill or Drifter Sandvik Part No. Length mm Diameter mm Thread FURUKAWA SKT HD609 HD ,75 T38 SKT HD609 HD ,75 T45 SKT HD609 HD ,75 T38 SKT HD609 HD ,75 T45 SKT HCR180 HCR ,9 T38 SKR HD75 HD ,9 R38 SKR HD135 HD ,9 R38 SKR HD135 HD ,9 R38 SKR HD150 HD ,9 R38 SKT HD180 HD ,9 T38 SKT HD190 HD ,9 T38 SKR HD190 HD ,9 R38 SKR HD210 HD ,24 R38 49 SKT HD300 HD ,45 T38 SKT HD300 HD ,45 T45 SKT HD500 HD ,72 T45 SKT HD500 HD ,72 T51 SKT HD609R HD609R ,8 T38 SKT HD609R HD609R ,8 T45

53 Shank Adaptor SHANK ADAPTOR Part No. Rock drill or Drifter Sandvik Part No. Length mm Diameter mm Thread FURUKAWA SKT HD612 HD ,77 T45 SKT HD612 HD ,77 T45 SKT HD612 HD ,77 T45 SKT HD615 HD ,78 T45 SKT HD615 HD ,78 T51 SKT HD615 HD ,78 T51 SKT HD712 HD ,85 T45 SKT HD712 HD ,85 T45 SKT PD200 PD ,77 T38 SKT HD500 HD ,75 T45 SKT HD715 HD ,7 T51 SKT HD715 HD ,7 T51 SKT HD709 HD ,76 T38 SKT HD709 HD ,76 T45 50 SKT HD709 HD ,8 T38 SKT HD709 HD ,88 T45 SKT HD606 HD ,96 T38

54 Shank Adaptor SHANK ADAPTOR Part No. Rock drill or Drifter Sandvik Part No. Length mm Diameter mm Thread INGERSOLL-RAND SKT VL140 VL ,26 T38 SKT YH65 YH65/ ,87 T38 SKT YH65 YH65/ ,82 T45 SKT YH65 YH65 RP ,85 T38 SKT YH65 YH65 RP ,85 T45 SKT YH80 YH ,94 T45 SKR YH45 YH ,87 R32 SKR YH45 YH ,87 R38 SKT YH85 YH T51 SKT YH95 YH ,84 T45 SKT YH95 YH ,84 T45 SKT YH95 YH ,84 T51 SKT YH55 YH ,88 T38 51

55 Shank Adaptor SHANK ADAPTOR Part No. Rock drill or Drifter Sandvik Part No. Length mm Diameter mm Thread BOART LONGYEAR SKT HE125 HE125/ ,9 T45 MONTABERT SKT HC120 HC T38 SKT HC120 HC T45 SKT HC120 HC T45 SKT HC120R HC120R T45 SKT HC120R HC120R T51 SKT HC80 HC80/ ,1 T38 SKR HC80 HC80/ ,1 R38 SKT HC80 HC80/ ,1 T38 SKT H40 H40/ ,71 T38 TOYO SKR TH301 TH R38 SKT TH800 TH800/ T45 52 MITSUI SKT HD650 HD ,7 T38 SKT DH650 HD ,7 T45

56 Quality Assurance Warranty Conditions and Procedures of Claim Settlement (Shank Adaptor) 53 In order to make customers familiar with our warranty and claim settlement, we indicate the conditions and procedures in details as below. 1. Full compensation for the following situation: Fracture in the middle of shank adaptor when life time of the shank adaptor is less than 1/3 of the average life time of JSI shank adaptors delivered to the same user under the same working condition. 2. Partial compensation shall be made in accordance with wear rate of thread of shank adaptor when fracture at bottom of thread, except for the reasons such as rod punch bit, drilling string and hole are not in a straight line, bit hang up in the hole. 3. Impact face of shank adaptor is chipped, forward for analysis. If the related piston is chipped too and the order of failure between shank adaptor and piston can not be measured, we do not offer compensation. 4. Fracture at bottom of splines, forward for analysis. If deformation and adhesion appear at both ends of the splines, we do not offer compensation. 5. Fracture in the middle of thread, forward for analysis. If adhesion, laceration and blacken appear at the fracture, we do not offer compensation as the fracture is caused by lack of lubrication. 6. Should the same problem occur for initial shank adaptors out of any bulk order when user starts using the shank adaptors (i.e. first three pieces of shank adaptors prematurely damaged in the same way), please contact us or your suppliers immediately and stop using the remaining products, we will provide timely service and settlement (such as replacing the shank adaptors). Otherwise, we will not bear the responsibility. 7. Procedure: should the above-mentioned situations take place, please send the damaged shank adaptors in time to our technical department. Our reply shall be given in one week in compliance with our service commitment and handling standard. Distributor or Agent must offer written quality problem report issued by end-user for return shipment of goods. 8. In case other disputes happen, please send the remains of the shank adaptors to our company, and we both parties shall solve the issue by friendly negotiation. 9. Limitation on Liability. Except as provided for herein, in no event will JSI be liable for any indirect,incidental, special, consequential, punitive or similar damages including, but not limited to, lost profits, loss of data or business interruption losses. In no event will the total, aggregate liability of JSI under the Contract exceed the value of the Contract under which liability is claimed. The liability limitations shall apply even if JSI has been notified of the possibility or likelihood of such damages occurring and regardless of the form of action, whether in contract, negligence, strict liability, tort, products liability or otherwise. The parties agree that these limits of liability shall survive and continue in full force and effect despite any termination or expiration of any Contract. Any action by Purchaser against JSI must be commenced within one year after the cause of action has accrued. No employee or agent of JSI is authorized to make any warranty other than that which is specifically set forth herein. The provisions in any specification, brochure or chart issued by JSI are descriptive and are not warranties.

57 Coupling Sleeve Coupling Sleeve Code Instruction Coupling Sleeve Coupling Sleeve

Coupling Sleeve COUPLING SLEEVE C5517-R32/R38 One End With R38 Thread The Other End With R32 Thread Total Length-170mm Outside Coupling Sleeve coupling sleeve Thread Diameter Length mm in mm in Part

58 Coupling Sleeve COUPLING SLEEVE C5517-R32/R38 One End With R38 Thread The Other End With R32 Thread Total Length-170mm Outside Coupling Sleeve coupling sleeve Thread Diameter Length mm in mm in Part No. Weight(kg) R32/R / 4 " / 64 " CS4517-R32/R25 1 R32/R / 4 " / 64 " CS4517-R32/R R38/R / 32 " / 8 " CS5518-R38/R T38/R / 32 " / 8 " CS5518-T38/R32 2 T38/R / 32 " / 64 " CS5519-T38/R R / 32 " / 64 " CS5517-R T / 32 " / 64 " CS5519-T T / 32 " / 64 " CS6321-T T / 32 " / 64 " CS6621-T T / 8 " / 4 " CS7123-T T " / 4 " CS7623-T51 5.7

59 Warranty Conditions and Procedures of Claim Settlement (Coupling Sleeve) In order to make customers familiar with our warranty and claim settlement, we indicate the conditions and procedures in details as below. 1. Full compensation for the following situation: a. Metallographic analysis report shows breakage of coupling sleeve is caused by heat treatment defects or materials defects. b. Coupling sleeve split, except for the reason such as coupling is not turned firmly and shank or rod thread end is not aligned inside coupling. 2. Fracture in the middle of thread, forward for analysis. If adhesion, laceration and blacken appear at the fracture, we do not offer compensation as the fracture is caused by lack of lubrication. 3. Should the same problem occur for initial coupling sleeve out of any bulk order when user starts using the coupling sleeve (i.e. first three pieces of coupling sleeve prematurely damaged in the same way), please contact us or your suppliers immediately and stop using the remaining products, we will provide timely service and settlement (such as replacing the coupling sleeve). Otherwise, we will not bear the responsibility. 4. Procedure: should the above-mentioned situations take place, please send the damaged coupling sleeves in time to our technical department. Our reply shall be given in one week in compliance with our service commitment and handling standard. Distributor or Agent must offer written quality problem report issued by end-user for return shipment of goods. 5. In case other disputes happen, please send the remains of the coupling sleeves to our company, and we both parties shall solve the issue by friendly negotiation. 6. Limitation on Liability. Except as provided for herein, in no event will JSI be liable for any indirect,incidental, special, consequential, punitive or similar damages including, but not limited to, lost profits, loss of data or business interruption losses. In no event will the total, aggregate liability of JSI under the Contract exceed the value of the Contract under which liability is claimed. The liability limitations shall apply even if JSI has been notified of the possibility or likelihood of such damages occurring and regardless of the form of action, whether in contract, negligence, strict liability, tort, products liability or otherwise. The parties agree that these limits of liability shall survive and continue in full force and effect despite any termination or expiration of any Contract. Any action by Purchaser against JSI must be commenced within one year after the cause of action has accrued. No employee or agent of JSI is authorized to make any warranty other than that which is specifically set forth herein. The provisions in any specification, brochure or chart issued by JSI are descriptive and are not warranties. 56Quality Assurance

ROCK TOOLS. Small Hole Drilling/Threaded Button Bits/ RODS/Shank Adapter/Coupling Sleeve.

ROCK TOOLS. Small Hole Drilling/Threaded Button Bits/ RODS/Shank Adapter/Coupling Sleeve. Small Hole Drilling/Threaded Button Bits/ RODS/Shank Adapter/Coupling Sleeve www.drillconnex.co.nz +64 21 998 762 (Lance) +64 21 742 620 (Charlie) +64 21 855 963 (Glenn) SINCE 1996 Introduction of the