Digital Indicators 1075 / 1080 / Features. Technical Data IP MarCator. Digital Indicators

Transcription

1 Digital Indicators 175 / 18 / 181 IP51 Features Functions: ON/OFF (Set display to zero) mm/inch Reversal of counting direction PRESET (for entering a numerical value) DATA (data transmission with a data connection cable) LOCK-Function: keys can be blocked, only applies to Capacitive measuring system, life of battery approx. 2 years Max measuring speed 1.5 m/sec (6 /sec) MarConnect Data output: choose either USB OPTO RS232C Digimatic High contrast Liquid Crystal Display with 8.5 / 1 mm high digits Operating temperature 1-4 C Class of protection IP51 according to IEC 6529 Scope of supply: Battery, Operating instructions 181 Measuring Resolution Span of error G * Measuring Weight range force mm (inch) mm/inch mm N g (.5 ).1/ (.5 ).5/ (.5 ).1/ * in any zero point

2 Digital Indicators 175 / 18 / Protection cap for lifter 2 Measuring spindle lifter 3 Display 4 Operating buttons 5 Mounting shank 6 Measuring spindle 7 Contact point 91 8 Data output 9 Battery compartment Shown with Mounting Lug Accessories Additional Accessories Page Battery 3V, Type CR Data Connection Cable USB (2 m) 16 EXu Data Connection Cable Opto RS232C (2 m), with SUB-D jack 9-pin 16 EXr Contact Points Special Holder Sensor Lever Accessories for Data Processing see Chapter 11 Data Connection Cable Digimatic (2 m), Flat plug 1-pin 16 EXd Adapter bush for adapting mounting shank 8h6 mm to inch bore Lug back 175 b

3 MarCator 186 The new Digital Indicator Marcator 186. With the large display and the integrated tolerance function, your measurement results are clearly visual. Clear display Tolerance indication with the diplayed value Displayed is the actual measured value and the tolerance zone position Tolerance indication without the value in the display. In and Out of tolerance will be indicated in the display as a symbol. Universal Data-Interface USB Digimatic RS232C No interface box is required! Simple and inexpensive way to set up a multiple measuring instruments via a USB hub Digimatic To connect a Digiamtic compatible evaluation instrument Mahr Opto RS232C For direct connection to a COM port on a PC I P P r o t e c t i o n c l a s s I P 5 4 (optional) Protection cap is sealed Rubber bellows for the measuring spindle Sealed battery compartment Absolute function: Digital Indicator can be set in any position to. without losing the reference to the preset value. Error free operation - Lock function Code Initial First Numeral Second Numeral IP 5 4 International Protection Dust protected Protection against splash water in all directions Lock function: This prevents unintentional activation of an operating button. Either all the operating buttons or only certain individual buttons can be locked. If a locked operating button is pressed the LOC symbol will appear in the display.

4 Digital Indicators MarCator 186 / 186 Z, Resolution.1 mm /.5 Shown with Mounting Lug 12.5 mm Dimensions 25 mm Measuring range a b c mm (inch) mm mm mm 12.5 (.5 ) (1 ) (2 ) (4 ) mm Features Functions: ON/OFF RESET (Set display to zero) mm/inch Reversal of the counting direction PRESET (Allows the entry of any value using set buttons) (Enter tolerance limit values) (Display can be set to zero, without losing the reference to the Preset value) <> (Tolerance GO / NO GO display mode) DATA (when connected with a data connection cable) Factor (adjustable) Indvidual buttons can be locked Operating and diplay unit (bezel) can be rotated through 28 High contrast LCD with 11 mm high digits Inductive measuring system, battery life approx. 2 hrs. Maximum measuring speed 1.5 m/s (6 /s) Lifter protection cap on the measuring spindle MarConnect data output: choose either USB OPTO RS232C Digimatic Operating temperature 1-4 C Class of protection IP42 in accordance to IEC 6529 Supplied with: Battery, operating instructions Measuring Resolution Span of error* Repeatability Measuring Weight Mounting range force shank mm (inch) mm/inch mm mm N g dia (.5 ).1/ h (1 ).1/ h (2 ).1/ h (4 ).1/ h (.5 ).1/ / (1 ).1/ / * in any zero point

5 Digital Indicators MarCator 186 / 186 Z, Resolution.1 mm /.5 Shown with Mounting Lug 12.5 mm Dimensions 25 mm Measuring range a b c mm (inch) mm mm mm 12.5 (.5 ) (1 ) (2 ) (4 ) mm Features Functions: ON/OFF RESET (Set display to zero) mm/inch Reversal of the counting direction PRESET (Allows the entry of any value using set buttons) (Enter tolerance limit values) (Display can be set to zero, without losing the reference to the Preset value) <> (Tolerance GO / NO GO display mode) DATA (when connected with a data connection cable) Factor (adjustable) Indvidual buttons can be locked Operating and diplay unit (bezel) can be rotated through 28 High contrast LCD with 11 mm high digits Inductive measuring system, battery life approx. 2 hrs. Maximum measuring speed 1.5 m/s (6 /s) Lifter protection cap on the measuring spindle MarConnect data output: choose either USB OPTO RS232C Digimatic Operating temperature 1-4 C Class of protection IP42 in accordance to IEC 6529 Supplied with: Battery, operating instructions Measuring Resolution Span of error* Repeatability Measuring Weight Mounting range force shank mm (inch) mm/inch mm mm N g dia (.5 ).1/ h (1 ).1/ h (2 ).1/ h (4 ).1/ h (.5 ).1/ / (1 ).1/ / * in any zero point

6 Digital Indicators MarCator 186 W, Water proof version 12.5 mm Dimensions 25 mm Measuring range a b c mm (inch) mm mm mm 12.5 (.5 ) (1 ) Features Functions: ON/OFF RESET (Set display to zero) mm/inch Reversal of the counting direction PRESET (Allows the entry of any value using set buttons) (Enter tolerance limit values) (Display can be set to zero, without losing the reference to the Preset value) <> (Tolerance GO / NO GO display mode) DATA (when connected with a data connection cable) Factor (adjustable) Indvidual buttons can be locked Operating and diplay unit (bezel) can be rotated through 28 High contrast LCD with 11 mm high digits Inductive measuring system, battery life approx. 2 hrs. Maximum measuring speed 1.5 m/s (6 /s) Sealed protection cap Measuring spindle is sealed with a rubber bellows, thus preventing contamination by liquids and impurities MarConnect data output: choose either USB OPTO RS232C Digimatic Operating temperature 1-4 C Class of protection IP54 in accordance to IEC 6529 Supplied with: Battery, operating instructions Measuring Resolution Span of error* Repeatability Measuring Weight Mounting range force shank mm (inch) mm/inch mm mm N g dia (.5 ).1/ h (1 ).1/ h (.5 ).1/ h (1 ).1/ h * in any zero point

7 MarCator 187 The new Digital Indicator Marcator 187. The multi-functional Digital Indicator with a combined analog and digital display; plus tolerance and dynamic measuring functions. D y n a m i c m e a s u r i n g f u n c t i o n s MAX-MIN-Function ideal for testing flatness and concentricity MAX and / or MIN for searching the reversal point MAX MIN Universal Data-Interface USB Digimatic No interface box is required! Simple and inexpensive way to set up a multiple measuring instruments via a USB hub Digimatic To connect a Digiamtic compatible evaluation instrument RS232C Mahr Opto RS232C For direct connection to a COM port on a PC Clear display Tolerance indication The integrated bar graph visualizes the tolerance deviation. The out of tolerance; whether above the upper or below the lower tolerance limit is represented by arrows shown in the display. Absolute function: Digital Indicator can be set in any position to. without losing the reference to the preset value. Factor is adjustable a symbol with appear in the display Error free operation - Lock function Lock function: This prevents unintentional activation of an operating button. Either all the operating buttons or only certain individual buttons can be locked. If a locked operating button is pressed the LOC symbol will appear in the display. Example of application: - Chamfer Gage

8 Digital Indicators MarCator 187 / 187 Z, with analog display Shown with Mounting Lug Dimensions MAX MIN 12.5 mm Measuring range a b c mm (inch) mm mm mm 12.5 (.5 ) (1 ) Analog display Readings mm / inch 25 mm Display range mm / inch.1 /.5 ±.2 / ±.1.2 /.1 ±.4 / ±.2.4 /.5 ±.8 / ±.1.1 /.1 ±.2 / ±.2 Features Functions: ON/OFF RESET (Set display to zero) mm/inch Reversal of the counting direction PRESET (Allows the entry of any value using set buttons) (Enter tolerance limit values) MAX/MIN memory, ideal for searching the reversal point TIR (MAX-MIN) ideal for testing concentricity and flatness (Display can be set to zero, without losing the reference to the Preset value) (Set the analog display to zero) DATA (when connected with a data connection cable) Factor (adjustable) Indvidual buttons can be locked Operating and diplay unit (bezel) can be rotated through 28 High contrast LCD with 8.5 mm high digits Inductive measuring system, battery life approx. 2 hrs. Maximum measuring speed 1.5 m/s (6 /s) MarConnect data output: choose either - USB - OPTO RS232C - Digimatic Operating temperature 1-4 C Class of protection IP42 in accordance to IEC 6529 Supplied with: Battery, operating instructions Measuring Resolution Span of error* Repeatability Measuring Weight Mounting range force shank mm (inch) mm/inch mm mm N g dia (.5 ).1/ h (1 ).1/ h (.5 ).1/ / (1 ).1/ / * in any zero point

9 MarCator 188 Th e n e w D i g i t a l I n d i c a t o r M a r C a t o r To l e ra n c e m o n i t o r i n g i s s i m p l i f i e d w i t h t h e c h a n g i n g o f t h e c o l o r i n t h e b a c k g ro u n d l i t d i s p l a y. D y n a m ic m e a s u r i n g f u n c t i o n s MAX-MIN memory: ideal for testing flatness and concentricity MAX-MIN memory: for searching the reversal point MAX MIN Universal Data-Interface USB No interface box is required! Simple and inexpensive way to set up a multiple measuring instruments via a USB hub Digimatic Digimatic To connect a Digiamtic compatible evaluation instrument Tolerance function: clearly visual tolerance excess due to the change of color in the background lit display. RS232C Mahr Opto RS232C For direct connection to a COM port on a PC Control output can be connected to a SPS Absolute function: Digital Indicator can be set in any position to. without losing the reference to the preset value. Protection class IP54 according to IEC Especially suited for use in a manufacturing environment (except measuring range 5 mm) Analog display 3.I 3 Code Initial IP International Protection mm First Numeral 5 Dust protected Readings (switchable) mm / inch Display range mm / inch Second Numeral 4 Protection against splash water in all directions.1 /.5 ±.3 / ±.15.2 /.1 ±.6 / ±.3.5 /.5 ±.15 / ±.15.1 /.1 ±.3 / ±.15

10 MAX MIN 12.5 mm Digital Indicators MarCator 188 / 188 W, with analog display 25 mm 5 mm Features Functions: ON/OFF RESET (set digital and analog displays to zero) - - (set the analog display to zero) PRESET (enter any numerical values) DATA (data transmission) mm/inch-switchable Reversal of counting direction (switch value in digital display) MAX-MIN memory, ideal for searching the reversal point MAX-MIN memory, ideal for testing flatness and concentricity (Enter tolerance limit values) LOCK: operating functions can be blocked via PC-Software Power supply via the main power adapter MarConnect data output USB, OPTO RS232C, or Digimatic Can be remotely operated via the interface (Opto RS232C) Control output compatible to Dial Comparators with limit contacts Operating and display unit (bezel) can be rotated 28 Class of protection IP54 in accordance to IEC 6529 Operating temperature 5-4 C High contrast backlit LCD with 6.5 mm high digits Analog display with 4 mm pointer ensures better visual recognition, ideal when checking concentricity or flatness as well as searching for the reversal point when measuring bores Supplied with: Mains adapter, rubber bellows, operating instructions Measuring range Resolution Meas. force Span of error* Protection Mounting mm (inch) mm/inch N mm class shank dia. 23 V 115 V 12.5 (.5 ).1/ IP54 8h (1 ).1/ IP54 8h (2 ).1/ IP42 8h * in any zero point

11 - 5-5 Digital Indicator MarCator 187 B for 2 point inside measurement MAX MIN 125 mm Example of application With a 2 point inside measuring instrument the point of reversal is automatically determined through rocking back and forth. The actual value is detected and stored by the MIN function and indicated in the display (3). Features Functions: ON/OFF RESET (Set the display to zero) mm/inch Reversal of the counting direction PRESET (Allows the entry of any value using set buttons) (Enter tolerance limit values) START/STOP for searching the reversal point MAX/MIN memory, ideal for searching the reversal point (Display can be set to zero, without losing the reference to the Preset value) (Set analog display to zero) DATA (when connected with a data connection cable) Factor (adjustable) Indvidual keys can be locked Operating and diplay unit (bezel) can be rotated 28 High contrast LCD with 8.5 mm high digits Inductive measuring system, battery life approx. 2 hrs. Maximum measuring speed 1.5 m/s (6 /s) Sealed protection cap MarConnect data output: choose either USB, OPTO RS232C, Digimatic Operating temperature 1-4 C Class of protection IP42 in accordance to IEC 6529 Supplied with: Battery, operating instructions Dimensions Measuring range a b c mm (inch) mm mm mm 12.5 (.5 ) Analog display Readings mm / inch Display range mm / inch.1 /.5 ±.2 / ±.1.2 /.1 ±.4 / ±.2.4 /.5 ±.8 / ±.1.1 /.1 ±.2 / ±.2 Measuring Resolution Span of error* Repeatability Measuring Weight Mounting range force shank dia. mm (inch) mm/inch mm mm N g 12.5 (.5 ).1/ h * in any zero point

12 Accessories for MarCator 186, 187 and 188 Accessories for MarCator 186 and 187 Battery 3V, Type CR Data Connection Cable USB (2 m) 16 EXu Data Connection Cable Opto RS232C (2 m), with SUB-D jack 9-pin 16 EXr Data Connection Cable Digimatic (2 m), Flat plug 1-pin 16 EXd Mounting Lug 186 b Accessories for MarCator 188 Data Connection Cable USB (2 m) 2 usb a Data Connection Cable Opto RS232C (2 m), with SUB-D jack 9-pin 2 r Data Connection Cable Digimatic (2 m), Flat plug 1-pin 2 d Cable to connect control output to an SPS sps Mounting Lug 185 b Control Instrument for remote control 2 sg button operation 182 p (12,5/25) Accessories for MarCator 186, 187 and 188 Cable Release for measuring ranges 12.5 and 25 mm 185 a Pneumatic Lifter for measuring ranges 12.5 and 25 mm 182 p Pneumatic Lifter for measuring ranges 5 and 1 mm 182 p Additional Accessories Page Contact Points Special Holder Sensor Lever p (5/1) Accessories for Data Processing see Chapter 11

13 l l l MarCator. Dial Indicators Contact Points and Accessories for Dial Indicators, Dial Comparators and Probes Standard Contact Points 91 Ball dia. 3 mm Catalog no. 91 with steel ball H with carbide ball R with ruby ball 4363 Spherical Contact Points 92 Flat Contact Points R 1,5 ø4,2 R 6 ø4,2 ø4 ø4, H H Steel Carbide Steel Carbide contact face tipped Length mm R, ø ø11, Special Contact Points R3 95 R,3 ø4 98 H ø H d 913 ø7,5 426 M Ball Contact Point 96 H with carbide ball. accuracy ball dia. /-6µm Ball dia. d l Order Ball dia. d l Order mm mm no. mm mm no (1/4 ) Contact Rollers 99 Concentricity error 3 µm 99 A Conical Contact Points, Steel Carbide tipped 94 H Wedge Shaped Contact Points, Steel Carbide tipped 95 H Flat Contact Points, Steel, A = 1 cm Carbide tipped, dia. 7 mm 97 H Spherical Contact Points, Steel Carbide tipped 98 H Flat Contact Point, for mounting Pin Gage Holder 426 M for measuring threads using three-wire method Cylindrical Roller 99 A Radiused Roller, R = 5 mm 99 B

14 l MarCator. Dial Indicators Contact Points and Accessories for Dial Indicators, Dial Comparators and Probes Measuring Attachment 91 H with parallel adjustable carbide blades 91 H Pin Contact Point 911 dia. 1 mm, flat Length l Length l mm mm Pin Contact Point 911 H Carbide tipped, dia 1 mm, flat 911 H Carbide tipped, dia 1.5 mm, flat 911 H Measuring Spindle Extensions 912 Length l Length l mm mm G ø8h7 941 W 8H7 2 Special Holder 941 For all types of measuring equipment For placing a dial indicator at a certain distance or angle Travel of the measuring spindle 3 mm Contact Point 91 (interchangeable) 13 l ø12 ø8h6 ø4 l 1 l 2 4 8h6 Straight Holder 941 G Angular Holder 941 W Mounting shank length l 1 l 2 l 2 l 2 mm Angle α=45 mm Angle α=6 mm Angle α=9 mm } } } Transmission error with the 941 W max. 1%; for travel 3 mm =.3 mm Sensor Level ø8h7 For testing concentricity in bore holes as well as difficult to reach outside diameters To be inserted in a measuring stand with a lifting device Contact Point 91 interchangeable Travel ±1 mm ø1 ø ø8h6