General Specifications

Transcription

1 General Specifications Model PR10 Inductive Conductivity Retractable fitting On-line measurements often present extra challenges, especially when routine maintenance is required. The PR10 is ideally suitable for applications where the sensors must be removed without interrupting or shutting down the process. Without any special tools the PR10 can be retracted safely from the process at pressures up to 5 bar (72 psi). For ease of use optional flush ports are available. In the retracted position the sensor can be kept moist, cleaned or even calibrated. This can all be done without process interruption or disassembly of the armature. Features One model used for ph, conductivity and inductive conductivity sensors uild in scraper to avoid contamination of the fitting Usable for wide range of sensors safe through the valve insertion and retraction design Simplified installation by optional ball valves with flanged or threaded connections Optional flush port for keeping sensor moist, cleaning and calibration Yokogawa Corporation of merica 2 art Road, Newnan, Georgia U.S Tel: Fax: GS 128J nd dition July 15, 2011

2 2 General Specifications. Wetted materials - Stainless steel ISI O-ring seals: Viton 70 shore - For sensor check instruction Manual. Non-wetted materials - For sensor check Instruction Manual - Stainless steel ISI 316, Polypropylene glass filled C. Insertion length - Ref. mechanical drawings Fig. 3-6 and Table 3. Pressure/temperature ratings - Static conditions: max pressure 10 bar (142 psi); max temperature 150 C (302 F), see Fig. 1 - Operating conditions during extraction and insertion max. 500 kpa, max. 100 C. Flange ratings: - IN flange N50 PN10 - NSI flange lbs F. Specifications of the sensor used -Please check sensor specifications G. Weight - pprox 2.5 kg (5.5 lbs) excl. ball valve H. ISC40G(S)-GR Sensor Wetted Parts Sensor : Victrex P Sealing gasket : Viton Unit: mm (inches) Table 1 Sensor Model and Suffix Codes Model Suffix Option escription ISC40G-GR General purpose, glass filled P, retractable model ISC40S-GR Intrinsically safe, glass filled P, retractable model Temp. sensor -T1 Pt1000 -T3 30kNTC Cable length Meters Meters Meters Meters Meters For mounting in PR10 retractable fitting Ø17 (0.67") Note: option Q is now delivered standard Minimum hole to fit sensor through: Ø48 (1.89") m19 x (1.77") Ø47 (1.85") Fig. 2 ISC40-GR ll Rights Reserved. Copyright 2010, Yokogawa Corporation of merica. Subject to change without notice. GS 128J2-02- July 15, 2011

3 3 Table 2 Model and suffix codes Model Suffix Option escription PR10 Retractable Conductivity Fitting 19 mm Fitting -S SS Type ISI 316 O-ring -V Viton O-ring sealing Tube length meter tube length Connection -50 N50 / 2 mounting Sensor adapter for -ISC4 ISC40 Screw-in adapters (SS ISI 316) /S200 ISO 228/1 G2 to 2 M-NPT Flange adapters (SS ISI 316) /F200 Flange adapter drain lbs /FN200 Flange adapter no drain lbs /F50 Flange adapter drain N50 PN10 /FN50 Flange adapter no drain N50 PN10 Weld-in adapter (SS ISI 316) /W200 Straight weld-in adapter ISO 228/1 G2 all valves (SSl ISI 316) /F200 Flanged ball valve lbs /F50 Flanged ball valve N50 PN10 /S200 Screw-in ball valve 2 F-NPT Certificate /M 3.1 according N for wetted metal parts *Note: With a ball valve, either a screw-in or flanged adapter is required Note: Please order the 1525F O-ring pick-up tool for maintenance purposes ll Rights Reserved. Copyright 2010, Yokogawa Corporation of merica. Subject to change without notice. GS 128J2-02- July 15, 2011

4 4 mensions unit mm (inches) 366 (14.4") 142 (5.6 ) PR ISC4/S200/S (15.5") 82 (3.25 ) PR ISC4/F..200/F200 PR ISC4/F..50/F (30.8") 533 (21") PR10-S-V-5-50-ISC4 Note: with ball valve olts and gasket are included Fig. 3 mensional drawing PR with mounted ISC40 sensor ll Rights Reserved. Copyright 2010, Yokogawa Corporation of merica. Subject to change without notice. GS 128J2-02- July 15, 2011

5 5 Options PR10 C C F G C C g C F F G g G g b FIG. 4 mensions of the PR10 options C g g b g b Table 3 mensions options in mm (inches) Option escription Fig. C b g /S200 ISO 228/1 G2 to 2 M-NPT ISO 228/1 - G2 2 NPT 58 (2.3) /F200 Flange adapter drain bs, G ISO 228/1 - G2 101 (4) 77 (3) 32 (1.3) 25 (1) 165 (6.5) 1/8 NPT 73 (2.9) 19 (0.7) (4.7)-(4.9) /FN200 Flange adapter no drain bs C, G ISO 228/1 - G2 101 (4) 54 (2.1) 32 (1.3) 25 (1) 165 (6.5) 73 (2.9) 19 (0.7) (4.7)-(4.9) /F50 Flange adapter drain N50 PN10, G ISO 228/1 - G2 101 (4) 77 (3) 32 (1.3) 25 (1) 165 (6.5) 1/8 NPT 73 (2.9) 19 (0.7) (4.7)-(4.9) /FN50 Flange adapter no drain N50 PN10 C, G ISO 228/1 - G2 101 (4) 54 (2.1) 32 (1.3) 25 (1) 165 (6.5) 73 (2.9) 19 (0.7) (4.7)-(4.9) /W200 Straight weld-in adapter ISO 228/1 G2 ISO 228/1 - G2 49 (1.9) 45 (1.8) /F200 all-valve flanged bs F 82 (3.2) 150 (5.9) 50 (2) M (4.8) /F50 all-valve flanged N50 PN10 F 82 (3.2) 165 (6.5) 50 (2) M (4.9) /S200 all-valve screw-in 2 F-NPT 2 NPT 142 (5.6) 50 (2 ) ll Rights Reserved. Copyright 2010, Yokogawa Corporation of merica. Subject to change without notice. GS 128J2-02- July 15, 2011

6 6 Table 4 Spare parts 1525P dapter SC4 - ISC Outer tube 1525F O-ring pick up tool 1525 O-ring set PR10-S-V C ey set 1525 Squeezing set 1525 Set M16 bolt & washer (8 pcs) 1525F Set M14 bolt & washer (8 pcs) 1525G Gaskets ball valves Y PR10/F200 - F Y PR10/FN200 - FN YJ PR10/W Y PR10/F YN PR10/F50 M1263M PR10/S M dapter 2 NPT-G2 SS (ISC40PR/) rain port connection The PR10 retractable fitting can be equipped with optional drain (or flush) ports on the flanged adapter. The drain ports are tapered 1/8 NPT female for small diameter connectors. Fig. 5 rain Port Connection ll Rights Reserved. Copyright 2010, Yokogawa Corporation of merica. Subject to change without notice. GS 128J2-02- July 15, 2011

7 ll Rights Reserved. Copyright 2010, Yokogawa Corporation of merica. Subject to change without notice. GS 128J2-02- July 15, 2011

8 Yokogawa Corporation of merica North merica 2 art Road, Newnan, G , US Phone: Fax: West irport lvd., Sugar and, TX Phone: Fax: Yokogawa has an extensive sales and distribution network. Please refer to the website (www. yokogawa.com/us) to contact your nearest representative. Mexico Melchor Ocampo 193, Torre C, Oficina 3 Veronica nzures.f., C.P Phone: (55) , (55) Yokogawa Canada, Inc. ay 4, th Street S, Calgary, Canada T2C2Z4 Phone: Fax: GS 128J2-02- Subject to change without notice Copyright 2010 Printed in The US, () I ll Rights Reserved. Copyright 2010, Yokogawa Corporation of merica. Subject to change without notice. GS 128J2-02- July 15, 2011