PEBBELL. Quick start guide

Transcription

1 Quick start guide

2 Buddy bu;on. Press for 3 seconds to send SOS SMS and call stored numbers Press once to accept Incoming call Quick start guide Insert Micro SIM into SIM slot Microphone Micro USB used for charging LED indicators SIM slot CALL bu;on. To call stored Number press for 3 seconds ON/OFF bu;on. To turn on/off press for 3 seconds For the first 1me use, please fully charge the ba;ery for around 8 hours, using the USB charger. When charging, the RED Power LED will be on (solid). AKer fully charged, the power LED will be off. Insert an ac1vated Micro SIM card and turn on the unit by pressing the on/off bu;on for 3 seconds. To get an ini1al loca1on, use outdoors or near a window so the PEBBELL may fix onto the satellites.

3 GSM LED - GREEN Connected to GSM network Connected to GPRS network No GSM connec1on Fast flash every 3 seconds Two fast flashes every 3 seconds Slow flash every 3 seconds Always on No SIM card GPS LED - BLUE Has GPS loca1on Fast flash Has GSM loca1on 1 second flash Has no loca1on Slow flash GPS chip sleeping Always off Power LED - RED Ba;ery charging Always on Not charged or fully charged PEBBELL on the move Ba;ery low Always off Flashing randomly Flashing regularly Quick start guide Set authorised number (and back- up number) Commands: A1 & B1 - send SMS with text A1 from primary authorised mobile, And if needed send an SMS with text B1 from a secondary authorised mobile. PEBBELL will reply with the message: Set mobile number OK! To delete a number from memory, send an SMS with text A0 or B0. Status request Command: status (send SMS with the text status from an authorised mobile) PEBBELL will reply E.g. A B C ; Spd: 0,100km/h; Geo:0,0,0; VB:1,10S; MV:1,100; LBS:1; LED:0; RCV:0; TZ:2.0; LI: 1; PS:1; DS:0; FL:1; Bat: 95. Whereby the number 0 implies that the func;on is turned off; whilst 1 indicates that the func;on is turned on. LocaIon request Command: loc (send SMS with text loc from an authorised mobile) PEBBELL will reply GPS Info! Time: dd/mm/yy HH:mm:ss; Lat: ; Lon: ; Spd: 0 Al1tude:10.1 Bt: 19 maps.google.com/maps?q=loc: ,

4 Set GEO- FENCE Alarm Command: Gn, Y, Z, xxxm/km (send SMS with the text e.g. G1,1,1,100M from an authorised mobile) Whereby: n=geo fence number (from 1 to 3). The user can set up to 3 Geo fences. Y=0 means to turn off the func;on. Y=1 means to turn on the func;on. Z=1 means to set alarm when the PEBBELL enters the pre- set area. Z=0 means to set alarm when the PEBBELL leaves the pre- set area. xxxm/km is the radius distance from the PEBBELL s current loca;on, must be 3 digitals. M means meters, KM means kilometres. PEBBELL will send, to authorized numbers, the message Geo fence alarm!+gps info when it enter the set area. NB: User must set this func1on when the PEBBELL already has a fixed GPS signal. To turn off this func1on, please send G1,0 or G2,0 or G3,0. GEO-Fence alarm

5 Over-Speed and Movement alerts Set Movement alert Command: M1, xxxm/km (send SMS with the text e.g. m1,100m from an authorised mobile) Whereby: xxx is the distance from the PEBBELL s current loca;on (specified as 3 digitals). M means meters, KM means kilometres When the PEBBELL exceeds the defined distance, it will send an SMS alarm to the authorised numbers and then automa1cally turn off the func1on. To turn off this func1on, please send M0 to the device. Set Over- Speed alert Command: speed1,s (send SMS with the text e.g. speed1,100 from an authorised mobile) Whereby s in km/h must defined in 2 or 3 digitals e.g. (01~255km/h). If the over- speed alert is set to 100km/h, when the PEBBELL s speed exceeds 100km/h, it will send, to the authorized numbers, the message Over- speed! +GPS Info. To turn off this func1on, please send speed0 to the device

6 Set VibraIon alarm Command: V1, xxs/m/h (send SMS with the text e.g. V1,05M from an authorised mobile) Whereby xx defines the ;me and must be two digital, S means second, M means minute, H means hour. If ac1vated the PEBBEL will send an SMS alarm to all registered phone numbers every for example 5 minutes if mo1on is detected. To turn off this func1on, please send V0. Set Fall detecion Command: FL1,f (send SMS with the text e.g. FL1,5 from an authorised mobile) Whereby f defines the sensi;vity between 1 and is for very fast accelerated speed. 9 - is for a slow accelerated speed. The PEBBELL will reply fall detec1on on and will send an alarm to all authorised numbers if a fall is detected. To turn off this func1on, please send FL0 Vibration and Fall detection alarms

7 Set Cell Locate Command: CL1 (send SMS with the text e.g. CL1 from an authorised mobile). PEBBELL will reply Cell locate on!. The PEBBELL can be tracked by GSM base sta1on tower, If GPS signal is not available. To turn off this func1on, please send CL0. Set GPS signal lost and recovery alert Command: GR1 (send SMS with the text e.g. GR1 from an authorised mobile). PEBBELL will automa1cally send the latest available GPS informa1on to the authorised numbers when it enters into the area without GPS signal. PEBBELL will then send GPS informa1on to authorised numbers as soon as the GPS signal is detected. To turn off this func1on, please send GR0. Set AGPS Command: AGPS1 (send SMS with the text e.g. AGPS1, , from an authorised mobile) A- GPS is for accelerated posi1oning and helping posi1on a device when GPS signals are weak or not available. AGPS will also help to fast fix the GPS signal when you turn on the PEBBELL. To turn off this func1on, please send AGPS0 Additional location functions

8 Set Cell Locate Additional location functions Command: CL1 (send SMS with the text e.g. CL1 from an authorised mobile). PEBBELL will reply Cell locate on!. The PEBBELL can be tracked by GSM base sta1on tower, If GPS signal is not available. To turn off this func1on, please send CL0. Set AGPS Command: AGPS1 (send SMS with the text e.g. AGPS1, , from an authorised mobile) A- GPS is for accelerated posi1oning and helping posi1on a device when GPS signals are weak or not available. AGPS will also help to fast fix the GPS signal when you turn on the PEBBELL. To turn off this func1on, please send AGPS0

9 Set Smart Power saving mode Command: PS1 (send SMS with the text PS1 from an authorised mobile) PEBBELL has a built- in mo1on sensor. With this mode ac1vated, the GSM chip is always on but the GPS chip is only ac1vated by mo1on or an incoming call or SMS. To turn off this func1on, please send PS0. Set Deep Sleeping Mode Command: DS1 (send SMS with the text DS1 from an authorised mobile) Both the GSM and GPS chip will be off to save power, they can be only ac1vated by mo1on. Once it ac1vated they will run for 15 minutes and sleep again if no further mo1on is detected. To turn off this func1on, please send DS0. Power Saving Note: When the PEBBELL s ba;ery is lower than 20%, it will send an SMS alarm BAT: LOW! + GPS INFO to all authorised numbers.

10 Content Specifica1on Dimensions 61mm*44mm*16mm Weight 35g GSM Frequencies 900/1800Mhz or 850/1900Mhz GPS chip U- blox 7 (Support AGPS) GPS sensi1vity Cold start: - 148dBm Hot start: - 162dBm GPS accuracy < 2.5m Time to first fix Cold start 32s, Warm start 11s, Hot start 1s Charging voltage 5V DC Ba;ery Chargeable 3.7V 900mAh Standby Current 2mAh Storage Temperature - 40 C to +85 C Opera1on Temperature - 20 C to + 80 C Humidity 5%- 95% non- condensing CauIons Please comply with the instruc1ons to extend the unit life: 1. Keep the unit dry. Any liquid may destroy or damage the inside circuitry. 2. Don t use & store the unit in dusty places. 3. Don t put the unit in overheated or overcooled places. 4. Clean the unit with a piece of dry cloth. Don t clean with chemicals or detergent. 5. Don t disassemble or refit the unit. 6. Using other ba;eries will cause damage.

11 Your SIM Your SIM A pay as you go roaming sim is provided with your pebbell - this connects with the best network available in your area Your SIM should have arrived already installed in your Pebbell, if not and you have purchased separately then take care inserting the SIM. Sims come supplied with 2 credit pre-loaded to get you started but we advise all customers to top-up straight away.

12 Tariff Info Your SIMs Tariff Please note you can use your own pay as you go SIM or a pay monthly SIM only contract. We ve partnered with cable.co.uk, the leading independent website which allows you to easily compare suitable deals - visit the products page at for more info. Calls and texts to the special SIM provided are also classed as calls to the Isle of Man, and may not be included in your inclusive minutes/text allowances. Please check with your mobile provider for current rates for these.

13 Top up Top up your SIM To top-up a SIM you can do so by visiting From here you can simply enter your tracker number and the amount you would like to top-up, then pay via PayPal or debit/credit card. It s as easy at that! Set up Low Balance Text Alerts Link a mobile number to your SIM to receive low balance text alerts by ing info@telmenow.com with the subject line Pebbell Linked Contacts'. In your , please include the phone number of your Pebbell's SIM card, and the mobile number you would like it to be linked to. Additionally these alerts can be set to go to an just let us know the address you want linked and we ll set that up.

14 Check your balance Checking SIM Balance from another mobile To check the balance of the SIM inside a Pebbell Tracker you can request this via text message. The text message must be sent from the linked mobile number (see page 13 for more information). Send Text To BAL 447<ENTER THE REST OF YOUR TRACKER NUMBER HERE> Example Text Contents: BAL Please note you must enter the tracker number by removing the 0 or the +44 and just starting with 44 and the remaining 10 numbers of your tracker number.