CERTIFICATE OF PRODUCT CONFORMITY

Transcription

1 CERTIFICATE OF PRODUCT CONFORMITY Dubai Central Laboratory Department (DCLD) of Dubai Municipality, hereby attests that the product(s) STEEL FOR THE REINFORCEMENT OF CONCRETE WELDABLE REINFORCING STEEL (Details as per the attached Scope of Certification) manufactured by: Sohar Port, Plot 12, P.O. Box - 404, PC 322 Falaj Al Qabail, Sohar, OMAN have been assessed in accordance with DCLD Document Ref. No. DM-DCLD-RD-DP (IC) General Rules for DM third party product certification system through factory assessment and the relevant Specific Rules, and were found in conformity with the standard specification: BS 4449: A3: 2016 Accordingly, DCLD hereby authorizes the above manufacturer to affix the DCL Product Conformity Mark to the above-mentioned product(s). Verify: for / ENGR. AMIN AHMED AMIN Director, Dubai Central Laboratory Department Dubai Municipality Certificate No: CL Current Issue Date: 28 July 2018 Valid Until: 27 July 2019 Original Issue Date: 28 July 2016 The attached Scope of Certification bearing the same Certificate No. forms an integral part of this Certificate. This Certificate is an electronic document, subject to the Terms and Conditions of the Product Certification System and shall not be reproduced except in full. DM-DCLD-F-IC-2031 REV 13

2 DCL PRODUCT CONFORMITY CERTIFICATION SCHEME SCOPE OF CERTIFICATION FOR CERTIFICATE NO. CL Certificate Issued To: Applicable Standard Specification: Applicable Specific Rules: Sohar Port, Plot 12, P.O. Box 404, PC 322 Falaj Al Qabail, Sohar, OMAN BS 4449: A3: Specification for Steel for the Reinforcement of Concrete - Weldable reinforcing steel-bar, coil and decoiled product RD-DP (IC) Specific Rules for Certification of Reinforcing Steel Bars (as per BS 4449: A3:2016) Through Factory Assessment. S/N Product Description Marking Product Details 1 Steel for the reinforcement of concrete As per attached DCL Approved Bar Grade B500B in Bars Diameter Size: 8 mm to 40 mm Markings in accordance with RD-DP (IC) NOTE 1: This document forms part of the Certificate of Product Conformity bearing the same certificate number. NOTE2: The above product shall bear the DCL Conformity Mark. Original Issue Date : 28 July 2016 Current Issue Date : 28 July 2018 Valid Until : 27 July 2019 Head of Products Conformity Assessment Section Dubai Central Laboratory Department Page 1 of 1 P.O. Box 67, DCL, Zabeel Road, Karama, Dubai, UAE F-IC-2032 R6

3 PRODUCTS CONFORMITY ASSESSMENT SECTION APPROVED STEEL BAR MARKING Certification Scheme for Reinforcing Steel CERTIFIED FACTORY FACTORY LOCATION CERTIFICATE NUMBER JINDAL SHADEED IRON & STEEL LLC SOHAR, OMAN CL COUNTRY CODE 9 MILL NUMBER 79 STANDARD SPECIFICATION BS 4449: A3: 2016 /DCL../////////.///////./////////./ NOTE: Please refer to the Certificate mentioned above and its Scope of Certification for details regarding the validity and the sizes covered. APPROVED BY: Head, Products Conformity Assessment Section F-IC-2045 R2

4 CERTIFICATE OF PRODUCT CONFORMITY Dubai Central Laboratory Department (DCLD) of Dubai Municipality, hereby attests that the product(s) CARBONS STEEL BARS FOR REINFORCEMENT OF CONCRETE (Details as per the attached Scope of Certification) manufactured by: Sohar Port, Plot 12, P.O. Box - 404, PC 322 Falaj Al Qabail, Sohar, OMAN have been assessed in accordance with DCLD Document Ref. No. DM-DCLD-RD-DP (IC) General Rules for DM third party product certification system through factory assessment and the relevant Specific Rules, and were found in conformity with the standard specification: BS 4449: 1997 with Amd. 1 Accordingly, DCLD hereby authorizes the above manufacturer to affix the DCL Product Conformity Mark to the above-mentioned product(s). Verify: for / ENGR. AMIN AHMED AMIN Director, Dubai Central Laboratory Department Dubai Municipality Certificate No: CL Current Issue Date: 28 July 2018 Valid Until: 27 July 2019 Original Issue Date: 28 July 2016 The attached Scope of Certification bearing the same Certificate No. forms an integral part of this Certificate. This Certificate is an electronic document, subject to the Terms and Conditions of the Product Certification System and shall not be reproduced except in full. DM-DCLD-F-IC-2031 REV 13

5 DCL PRODUCT CONFORMITY CERTIFICATION SCHEME SCOPE OF CERTIFICATION FOR CERTIFICATE NO. CL Certificate Issued To: Applicable Standard Specification: Applicable Specific Rules: Sohar Port, Plot 12, P.O. Box 404, PC 322 Falaj Al Qabail, Sohar, OMAN BS 4449: 1997 with Amd. 1 - Specification for Carbon Steel bars for the Reinforcement of Concrete RD-DP (IC) Specific Rules for Certification of Reinforcing Steel Bars (as per BS 4449: 1997 with Amd. 1) Through Factory Assessment. S/N Product Description Marking Product Details 1 Carbon Steel Bars for reinforcement of concrete As per attached DCL Approved Bar Grade 460B in Bars Diameter Size: 8 mm to 40 mm Markings in accordance with RD-DP (IC) NOTE 1: This document forms part of the Certificate of Product Conformity bearing the same certificate number. NOTE2: The above product shall bear the DCL Conformity Mark. Original Issue Date : 28 July 2016 Current Issue Date : 28 July 2018 Valid Until : 27 July 2019 Head of Products Conformity Assessment Section Dubai Central Laboratory Department Page 1 of 1 P.O. Box 67, DCL, Zabeel Road, Karama, Dubai, UAE F-IC-2032 R6

6 PRODUCTS CONFORMITY ASSESSMENT SECTION APPROVED STEEL BAR MARKING Certification Scheme for Reinforcing Steel CERTIFIED FACTORY FACTORY LOCATION CERTIFICATE NUMBER JINDAL SHADEED IRON & STEEL LLC SOHAR, OMAN CL COUNTRY CODE 9 MILL NUMBER 79 STANDARD SPECIFICATION BS 4449: 1997 with Amd. 1 /DCL./////////.///////./////////./ NOTE: Please refer to the Certificate mentioned above and its Scope of Certification for details regarding the validity and the sizes covered. APPROVED BY: Head, Products Conformity Assessment Section F-IC-2045 R2