Wireless LANs - PoE s Killer App

Transcription

1 Wireless LANs - PoE s Killer App

2 Wireless LANs - PoE s Killer App The Internet of Things New LAN on the Rise Synergy in the LAN Power is the New Signal Wireless Means Better Wire Readying for the Future

3 IoT Impact Data Devices Connectivity In the Cloud IoT Ubiquitous People +15% +40% 90%+

4 New LAN on the Rise Evolving LAN Devices Connected > People Connected Mobile Connections > Fixed Connections PoE Connections > Powered Connections

5 Convergence Uptake IT Converged vs Stand-Alone Systems (% Share by Value), North America BACS/HVAC Access CCTV Smoke Detector Energy Monitoring Data, video Lighting AV - Signage Power BSRIA, 2015

6 WiFi Everywhere Home Office Modern Day Fears Public Venue Out and About

7 LAN Speed Migration % Avg Speed per Switch Port (Gbps) % 50% 45% 40% 35% 30% 25% Wireless LAN Active Users Share % LAN Speed Increase 2.5x from 2015 to 2019 Fueled by Multi-Gigabit WiFi Wireless LAN Active Users Growth Outpacing Wired LAN % Dell Oro, 2015

8 Synergy in the LAN Wired 100M 1G 2.5G 5G 10G Wireless b 11 Mbps g 54 Mbps n 450 Mbps ac wave Gbps ac wave Gbps ax ~10 Gbps Power-over-Ethernet 1 st gen. 15W 2 nd gen. 30W 3 rd gen. 15/30/60/90W

9 Wireless LANs - PoE s Killer App The Internet of Things New LAN on the Rise Synergy in the LAN Power is the New Signal Wireless Means Better Wire Readying for the Future

10 PoE Adoption Rate BSRIA, 2015

11 Power Delivery Efficiency 100.0% 95.0% Efficiency (%) 90.0% 85.0% 80.0% 75.0% 20% Less Operating Cost 70.0% 65.0% PSE (Watts) 23AWG Efficiency 24AWG Efficiency

12 Power is the New Signal Frequency PSE Power Signal Power Noise Immunity Efficiency Information Capacity + Power Delivery Efficiency = New Cabling Performance

13 Bundling Conditions & Temperature Rise Powering over data cables causes heating of cabling Possible performance issue due to IL degradation Ambient temperature plus heat rise must stay below cable jacket rating 26 AWG Category 5e Category 6 Category 6A 100W 4pPoE Air Conduit Air Conduit Air Conduit Air Conduit

14 Effect of Heat on IL 60.0 Margin beyond the standard will ensure 100 m performance under max PoE load Channel Insertion Loss, db/100m Category 6A 20⁰C 60⁰C Frequency, MHz

15 Temperature Rise Mitigation Large bundles trap the heat Smaller bundles reduce cable heating by 25% Separating bundles reduce cable heating by an additional 30%

16 Wireless LANs - PoE s Killer App The Internet of Things New LAN on the Rise Synergy in the LAN Power is the New Signal Wireless Means Better Wire Readying for the Future

17 Access Point Specifications n ac Wave ac Wave ax (TBD) WiFi Data Rate 450M 1.3G 3.5-7G ~10G+ Ethernet Uplinks 100M 1G 1G 1G/2.5G/5G 5G/10G Number of Ethernet Uplinks Power Consumption 13W 25W 25W+ 25W+ 50W+

18 From the Telecom. Room To Floor Distribution Cabling typically bundled Distributed Wall Outlets Security Cameras Monitors Wireless Access Points Mixed signals 1G, 2.5G, 5G

19 To the Cell Cell size and cable uplinks Optimized for ac Future proof for future upgrades From TR Cables typically bundled up to the cell area

20 Coverage Area Smaller cell size To support greater number of active users To support VoWiFi To ensure higher datarate per user

21 Why Use Higher Performance Category Cable? Cat5e Cat6 Cat6A Category cabling can supply the frequency spectrum required to support the internal parameters of a single channel 2.5G 5G 10G

22 2.5G/5GBASE-T Cabling Requirement Frequency Alien Limited SNR IL PSANEXT PSAACR-F Alien Noise limitations PSANEXT and PSAFEXT from cable bundling Worsened with cables of varying data rates in close proximity Alien Noise minimized with Category 6A cabling

23 2.5G/5GBASE-T - What Cabling to Use? Cable Uplink Speed Multi-Gigabit Full Implementation

24 Wireless LANs - PoE s Killer App The Internet of Things New LAN on the Rise Synergy in the LAN Power is the New Signal Wireless Means Better Wire Readying for the Future

25 Deployment Strategies Brown Field Green Field Determine implementation limitations User density and average throughput AP functionality Power efficiency Evaluate mitigation strategies Plan carefully Consider grid cabling Provision for future upgrade Deploy Category 6A cabling Supports full implementation up to 10G per Ethernet uplink Designed for efficient power delivery up to 100W

26 Category 8 TSB-184A to support 4pPoE TSB-5021 to support 2.5/5G multispeed switching ISO : End-to-end link NEC 2017 Standards Update Limit bundle size for data cabling delivering >60W Exemption for LP rated cables

27 Why Belden 10GXS? Why Bonded-Pair? Smarter Cabling Solution 25% smaller 25% lighter Installable Performance Maintains physical integrity throughout installation and use Superior Network Performance Ethernet 2.5G/5G/10G HDBaseT Robust Cabling Solution Up to 100 m Up to 100 W Up to 60 C Best-in Class Performance 10GXS Bonded-Pair Technology REVConnect Bonded-Pair Pair Integrity

28 Why REVConnect? Reliable Consistency Repeatability Easy One-minute Bonded-Pair termination Versatile Universal core Universal tool More Than a Connector Termination cadence Project planning Supports Next Generation Power over Ethernet Multi-Gigabit WiFi Direct connection Revolutionary Jacks & Plugs

29 Cabling for Tomorrow Category 6A

30 Thank You! Ron Tellas Technology and Application Mgr, LAN