TETRA Interoperability Certificate

Transcription

1 TETRA Interoperability Certificate Harris, VIDA TETRA Rel. 1.0, SwMI EADS, THR9, Terminal Wokingham, November 2009 Latest SwMI SW Release: Rel 1.0 Latest Terminal SW Release: Latest SwMI HW Release: VIDA Tetra Sys Latest Terminal HW Release: RC-20 ISCOM (Istituto Superiore della Comunicazioni e delle Tecnologie dell'informazione) certifies, that the Harris, VIDA Tetra Rel. 1.0, SwMI and EADS, THR9, Terminal have been subject to interoperability testing for the "certified" features listed on the second page of this certificate. In accordance with the TETRA Interoperability Profiles, TIP compliance Test Plan and the related TETRA interoperability requirement tables. The table lists all the available TETRA interoperability profiles, and summarises the main functionalities of every profile according to the TETRA interoperability requirement tables. A feature is "" when it has been successfully tested during the last test session with one of the testing method described in the TETRA process document part 1 (TPD001). A breakdown into the feature details is given in the Feature Compliance Overview section of this certificate. Detailed test results and explanation about the procedure used to provide verdicts are listed in the Test Report associated to the Certificate. Massimo Proietti Ing. Giuseppe Pierri - V.le America 201, Rome, Italy Ph.: , Fax: tetra_ctc.iscom@sviluppoeconomico.gov.it, Date of issue: Web: 8 October /12

2 features at this Session Tetra Association TTR001-01:Core Registration Group Management Group call Individual call Status messages Partial Pre-emptive Priority Call - Emergency Call - Cell Re-selection - PSTN interconnect - MS-ISDN Numbering - In Call Signalling Subscriber Class Procedures - Common Secondary Control Channels - BS Fallback Operation - Energy Economy Mode - Transmit Inhibit Tetra Association TTR001-02:SDS SDS Type 1, 2 or 3 - SDS-TL - Store and Forward - Tetra Association TTR001-03:DGNA Support for individually addressed DGNA Support for group addressed DGNA - Tolerance of unsupported DGNA functions - 2/12

3 Feature Compliance Overview The first pages of this certificate provide an indication about the main interoperable TETRA features for each TIP specification (as described in the TIC-RT). The main interoperable TETRA features result depend on a set of sub-feature, the verdicts associated to each sub-feature are directly derived from the analysis of the performed test cases. The results associated to each feature and sub-feature are shown in the "Feature compliance report" table below. The main features are indicated with grey background and the associated sub-features (or second level features) have white background. The verdict assigned to a sub-feature as shown on page 2, is derived by the Feature compliance report tables. Verdict Partial _ Definition All required tests have been performed and passed Not all the required tests have been performed but none have failed Feature cannot be certified e.g. it is not supported by at least one product, no tests were performed, or some tests were performed but at least one failed The verdict assigned to a sub feature is the result of an analysis of the test case results listed in the Test Report. The verdict assigned to each sub-feature is derived from one or several test case results or test steps result, the TETRA Interoperability requirement tables (TIC-RTs) indicate the link between sub-features and test cases for the certified set of equipment capabilities (see Test Report) Verdict Passed (notex) Time_limited Definition All mandated tests or steps of tests linked to this functionality (as per TIC-RT indication) are compliant with the TIP specification relevant to this feature. A note can be associated to this result, if further clarification on the behaviour of the equipment is needed Not all Mandated tests (as per TIC-RT indication) have been executed (ran out of time) 3/12

4 The verdict associated to the feature gives also indication about the method used to test that feature. The allowed testing Methods are listed in the table below, a complete description of the procedures and constraints associated to each of them can be found in the "TPD001 TETRA Interoperability Certification Process Description" document. Testing Method Complete Spot Regression Regression on spot Description All mandated tests associated to the feature have been executed Only a selection of the mandatory test cases associated to the feature has been executed during the test session. These tests are a subset of the tests performed on an equivalent software which has been "completely" tested against the same functionality on a different equipment, see manufacturer declaration in annex A Only a selection of the mandatory test cases associated to the feature has been executed during the test session. These tests are a subset of the tests performed on a previous version of the same software which has been "completely" tested in a previous test session against the same functionality, see manufacturer definition in annex A The regression method has been applied on the verdicts based on the spot testing method Depending on equipment capabilities declared by the manufacturer, some features or sub features cannot be tested. The following table describes meaning of the used abbreviation Indication SwMI-nr MS-nr SwMI-nr MS-nr Definition The SwMI and MS do not support the minimum features required to verify these items. The SwMI does not support the minimum features required to verify these items. The MS does not support the minimum features required to verify these items. 4/12

5 ISCOM has made every effort to ensure that every result has been correctly evaluated in accordance with the relevant TIPs, Test Plans and TIC-RTs. ISCOM has no liability for the test results, or towards the manufacturers, The table on the following page lists HW and SW releases of SwMI and Terminal under test in the last four test sessions and the used TIP specifications, Test Plans and TIC-RTs. This Certificate and Certificates from previous test sessions are available on the TETRA Association web site ( The feature results are shown in the tables below 5/12

6 Information on equipment under test and document references Test Date/Place SwMI Type Session Harris Wokingham November 2009 VIDA TETRA system SwMI HW Release SwMI SW Release Terminal Type Terminal HW Release Terminal SW Release TIP Specs and TIP Compliance Test Plans VIDA TETRA system Release 1.0 THR9 RC Core TTR v5.0.0 IOP v2.6.0 TIC-RT v240 SDS TTR v2.0.1 IOP v2.0.0 TIC-RT v208 DGNA TTR v2.0.0 IOP v2.0.1 TIC-RT v214 6/12

7 Feature compliance report Test Session Harris Wokingham November 2009 TTR Core Registration ITSI attach SwMI initiated location updating LA timer based Periodic location updating De-registration Group Management Single group attachment Multiple group attachment MS initiated group detachment SwMI initiated group management Group call Normal group call Late entry Priority Group scanning Call setup modifications Resource Queuing based on Call Priority Broadcast Call 4_pass_of_4 2_pass_of_2 13_pass_of_13 7_pass_of_7 6_pass_of_6 2_pass_of_2 PASSED 10_pass_of_10 4_pass_of_4 7/12

8 Limited coverage notification Individual call Simplex individual call Duplex individual call Call setup modifications Resource Queuing based on Call Priority Indication of imminent call disconnection Status messages Individual addressed Status transfer Group addressed Status transfer Pre-emptive Priority Call Pre-emption of Resources Pre-emption of Busy Users Emergency Call Pre-emption of Resources Pre-emption of Busy Users Call setup modifications Cell Re-selection Undeclared Unannounced Announced - with Call Restoration PASSED No_Equipment 2_pass_of_2 No_Equipment 1_pass_of_2 4_pass_of_4 FAILED Time_Limited 3_pass_of_5 FAILED Time_Limited 3_pass_of_5 FAILED Complete 3_pass_of_4 2_pass_of_2 FAILED Complete 0_pass_of_1 FAILED No_Equipment 8_pass_of_15 FAILED Complete 2_pass_of_3 FAILED No_Equipment 5_pass_of_11 8/12

9 Announced - without Call Restoration PSTN interconnect TETRA Originated Call PSTN Originated Call DTMF over-dial Emergency Telephone Calls MS-ISDN Numbering MS ISDN - Voice Call MS-ISDN Status In Call Signalling Slow Signalling on Traffic Channel (SACCH) Fast Signalling on Traffic Channel (FACCH) 8_pass_of_8 4_pass_of_4 4_pass_of_4 Subscriber Class Procedures Cell Selection based on Subscriber Class Subscriber Class Delivery during Location Update Use of Preferred Subscriber Classes Common Secondary Control Channels One C-SCCH per cell Two C-SCCH per cell Three C-SCCH per cell BS Fallback Operation Switch to/from BS Fallback Operation Roaming with BS Fallback Operation FAILED Time_Limited 10_pass_of_12 FAILED Complete 1_pass_of_2 Time_Limited 1_pass_of_2 9/12

10 Services with BS Fallback Operation Energy Economy Mode Energy Economy Mode Operation TETRA 8_pass_of_8 Transmit Inhibit TXI Activation & De-Activation without Status message TXI Activation & De-Activation with Status message Receipt of group addressed service during TXI 6_pass_of_6 2_pass_of_2 Short Data Service (SDS) SDS Type 1, 2 or 3 SDS Type 1 SDS Type 2 SDS Type 3 SDS-TL Individually Addressed Group Addressed Using MS-ISDN dialling Using UCS2 coding scheme Using 7-bit coding scheme FAILED Complete 2_pass_of_3 FAILED Complete 0_pass_of_1 2_pass_of_2 Store and Forward Individually Addressed Group Addressed Dynamic Group Number Assignment (DGNA) Support for individually addressed DGNA Support for individually addressed DGNA assignment without attachment 12_pass_of_12 10/12

11 Support for individually addressed DGNA assignment with attachment as selected group Support for individually addressed DGNA assignment with attachment as scanned group Support for individually addressed DGNA assignment with rejected attachment Support for individually addressed assigment for pre-programmed group TETRA 5_pass_of_5 Support for group addressed DGNA Support for group addressed DGNA assignment Management of 'group assignment lifetime' Support for group addressed DGNA deassignment Tolerance of unsupported DGNA functions MS tolerance of unsupported individual addressed DGNA signalling MS tolerance of unsupported group addressed DGNA signalling 11/12

12 Annex A TETRA List of Revisions of the Certificate Date Ver. Modification 24 March First published version 8 October updating: - in the table features at this Session the result of Group Call has been changed from Partial into, while the result of Individual Call has been changed from - into Partial (p.2); - in the table Feature compliance report the verdicts of both Group Call and Individual Call have been changed (pp. 7-8). 12/12