Gallagher Controller 6000 PoE + Kit

Transcription

1 Gallagher Controller 6000 PoE + Kit Gallagher provides a Power over Ethernet Plus (PoE+) Controller solution, to cater for site architectures leveraging distributed ethernet networks. The Gallagher PoE + kit enables sites to power the Controller 6000 and in turn their doors access needs directly from a from a buildings Ethernet network Key benefits: The kit comes pre-wired allowing quick and easy installation; It provides control of up to two doors including electric locks* within the parameters of the PoE+ standard, which is specified at 25.4 watts over a CAT5e network segment of up to 328ft (100m) The Gallagher PoE + Kit includes: Gallagher Controller 6000 (and single cabinet); Gallagher GBUS Universal Reader Interface (either Cardax IV or Wiegand) and PoE + Splitter PoE+ Kit Options C Gallagher Controller 6000 PoE + Kit Cardax IV readers. C Gallagher Controller 6000 PoE + Kit Wiegand readers. *Requires PoE IT network infrastructure security.gallagher.co

2 Technical Specifications Gallagher Controller 6000 PoE + Kit Door Equipment Capacity The PoE+ system allows a power maximum of 25.5 watts, which equates to a load of approximately 2 Amps at 13.6Vdc. Total maximum allowable current - equipment & locks is 1500 ma. The capacity of the Gallagher Controller 6000 PoE+ Kit is as follows: Equipment Current* Current Available for Other Equipment Doors supported in PoE+ mode only 2 Controller 6000 functionality Network connectivity Power Source Equipment device specification# Maximum distance from PoE switch to Gallagher Controller PoE+ Controller with one Gallagher T10/11/12 Reader PoE+ Controller with two Gallagher T10/11/12 Readers Electric Locks 500 ma 1000 ma 550 ma 950 ma Refer to the Gallagher Controller 6000 datasheet for specifications 10/100BaseT, RJ45 PoE+ (IEE802.3at), 25.5 watts 328ft (100m) 500 ma (approx.) * Allowance has been made for in-rush current during Controller startup. # Equipment not provided Cable lengths stated are for data only. DC power cable must be of a gauge that provides a minimum of 12 volts DC at the reader terminals. Approximate length. Please refer to the reader manufacturer s specification. Equipment Connectivity Gallagher Reader version Wiegand Reader version Readers 2 2 Reader Data Cable 4 core security cable or Cat5 600ft (200m) 450ft (150m) Inputs 4 state balanced inputs 8 4 Relay Outputs Form A dry contact C/O contacts 2 2 Relay specification Shipping dimensions 3 Amps at 24vDC/AC (resistive load) 1 Amp at 24vDC/AC (inductive load) 11.5in x 11.5in x 4in Gallagher World Headquarters Kahikatea Drive, Hamilton 3206 Private Bag 3026, Hamilton 3240 New Zealand TEL: sales@security.gallagher.co REGIONAL OFFICES New Zealand Americas Asia Australia India Middle East South Africa United Kingdom / Europe Disclaimer: System configuration, network capacities and the volume of system activity affect performance. Please contact Gallagher for advice. In accordance with the Gallagher policy of continuing development, design and specifications are subject to change without notice. Gallagher Group Limited is an ISO 9001:2008 Certified Supplier. Copyright Gallagher Group Limited All rights reserved. 3E /13 security.gallagher.co

3 Gallagher Systems Catalogue ACCESS CONTROL, ALARMS MANAGEMENT, perimeter SYSTEMs

4 Contents Overview Integrated access control, intruder alarms, & perimeter security...4 Software Controlled Systems High Level System architecture gallagher security platform...6 Command And Control Platform SOFTWARE...9 Gallagher System Overview...9 Gallagher Command Centre Integration Platform Software Maintenance edge devices FIELD CONTROLLERS...18 Gallagher Controller access control READERS...20 Gallagher T10, T11, T Gallagher Prox & Prox Plus Biometric Readers: Morpho Wirefree Readers: Aperio, Salto Long Range Readers: Nedap alarms management keypads...24 Gallagher Intelligent Door Terminal Gallagher Remote Arming Terminal Gallagher Fence Keypads

5 INPUT AND OUTPUT EXPANSION DEVICES - gbus...26 ELECTRIC FENCE CONTROLLERS...27 Gallagher Fence Controllers PERIMETER SENSORS...28 D10, D Gallagher Fence Integrity Monitor System Components ANCILLARY PRODUCTS...32 Cards & Keyfobs, Encoding Cabinets PHYSICAL FENCE COMPONENTS...34 Standalone Systems ELECTRIC FENCE...38 Gallagher Trophy Gallagher Medal System Diagrams 1. Gallagher software control system Gallagher Trophy 6 electric fence system Gallagher Medal electric fence system

6 Overview Gallagher has a reputation for applying world class thinking to address the most significant issues facing organizations large and small: Security and risk management Personnel workflow Business continuity Drawing on our competencies of security knowledge and expertise, secure data management and systems integration our offering combines: > access control > intruder alarms management > perimeter security > compliance management Gallagher systems can be fully integrated and securely managed through privileges allocated to authorized users. No matter how small or large your organization and simple or complex your needs, we have the answer from our unique, business connected security platform that executes business policy, to standalone perimeter security systems we can enable your operation to run smoothly. Drawing on our competencies of security knowledge and expertise, secure data management and systems integration, our offering is expanding. We are moving towards a suite of systems that can be fully integrated and securely managed through allocated privileges to authorised users. We pride ourselves in our agility and dedication to delivering innovative and imaginative security solutions. Our goal is to redefine what s possible for our customers. Professional Services Gallagher provides a range of Professional Services and welcomes the opportunity to work with customers and Certified Channel Partners to add value to the implementation of its systems on customer sites. Examples of services Gallagher can provide include: > Project management - typically for large, global customers > Strategic planning and migration paths planning for future requirements > Requirements analysis and customizations changes required to Gallagher developed software to meet the customer s requirements > Integration development of middleware to provide integration between two or more systems > Database conversion and preparation > Configuration and advanced system programming > System audit > Preparation and implementation of software upgrades Our vision is to provide the most business connected security platform that delivers more end customer value than traditional security ever has. We pride ourselves in redefining what s possible for our customers. 4

7 Software Controlled Systems high level system architecture The only platform in the world to deliver a native combination of: > access control > intruder alarms > perimeter security > business policy enforcement 5

8 high level system architecture Gallagher Security Platform Gallagher s business connected security integration platform manages equipment from multiple vendors delivering: > Improved situational awareness in Command and Control > A common management process across Gallagher and third party systems > Custom screen builders, not requiring Developers Business Processes & Policy People Assets Visualization Mass Notification Credentials, photos, role, qualifications, certifications, inductions, roster, attendance, health & safety record, black list Buildings, vehicles, equipment, accommodation, BMS, energy management Dashboards, reporting, web portals , text message Gallagher or Third Party Developed Interfaces middleware Command & Control Software Field Controllers Imaging Viewer Edge Devices Readers Keypads Input & Output Interface Fence Controller Perimeter Sensors Elevators Other 3 rd Party Products DVR/NVR Components Cards Alarm Sensors Physical Fence Compatible Integrated Technologies Cameras 6

9 Software Controlled Systems Command and Control platform Gallagher s security platform is underpinned by powerful software and strong integration architecture in the field. 7

10 8

11 command and control platform Introducing Gallagher System Overview GALLAGHER command centre software Gallagher uses industry standard software development tools to deliver the latest platform for integrated security and business continuity. Manage physical security (access control, intruder alarms, and perimeter security) with a comprehensive scalable Microsoft Windows based system. Gallagher s security platform meets the needs of small single sites, through to large multinational enterprise-wide installations. Our Command Centre software platform features robust open integration architecture. The system has the scope to meet whatever your security requirements may be. It is an intruder alarm system, an access control system, a perimeter security system and a central hub for integrated site security. It is also a management information system which automatically executes business policy. Gallagher s security platform resides on an organisation s IT network and stores information about cardholders, the site, and system activity. The system collects real time data and can be integrated with other systems whether for security management (for example, DVR and perimeter security systems), or business management (for example, facilities management and HR systems such as SAP and PeopleSoft ). The system design of Gallagher s security platform is both straightforward and flexible, to enable it to meet the specification of each individual site. Customers are able to design and adapt screen layouts in minutes with full support for multi-monitor workstations. All the information needed to complete a task is provided seamlessly and in context, on one screen. Gallagher Command Centre is the central management software for the system. Supporting peer-to-peer communications over TCP/IP, intelligent Gallagher field Controllers enable efficient and effective distributed system configuration. They are designed for making security decisions in the field. Our field Controllers operate independently of the Command Centre software and feature the same strong, open integration architecture enabling event correlation from field sensors and edge devices. Gallagher s field Controllers are supported with an extensive range of devices for connecting system inputs and outputs, alarm diallers, alarm keypads, access control readers, cards and keyfobs, electric fence controllers, sensors, hardware and ancillary accessories. This system catalogue aims to give you an overview of the Gallagher s security platform and system components. Product specific datasheets are available for more detailed information on functionality and technical specifications. These can be found at sales@security.gallagher.co or contact your Gallagher Certified Channel Partner or Gallagher Business Development Manager. 9

12 command and control platform Gallagher Command Centre Integration Platform The central management tool for the Gallagher security platform, Gallagher Command Centre software provides a powerful and versatile feature set. Key features of the Gallagher Command Centre integration platform include: > Microsoft Windows Operating Systems > Microsoft SQL Database options > OPC enabled for sharing event information > Encrypted communications > Upgradable and scalable solutions. employs 128-bit Secure Socket Layer (SSL) encryption to encrypt data communicated over the network. This includes communications between Gallagher Command Centre server and Gallagher Controllers, and peer-to-peer Controller communications. High security system options offering higher levels of encryption are available. through Gallagher Command Centre. Coupled with integrated DVR, a site has a powerful security platform. Security is managed through a single user interface complemented with a comprehensive single audit trail. Gallagher s scalable technology platform provides scope for unlimited perimeter security management across distributed sites. Gallagher Command Centre links to Gallagher Controllers over Ethernet using TCP/IP, a world standard network and internet transmission protocol. This protocol ensures the system communications are internet compatible. Encryption One of the attributes that sets Gallagher Command Centre apart is the high level of security inherent in Gallagher system communications. The system System Integration Gallagher Command Centre provides the platform for a complete security solution through system integration capabilities. INTEGRATION WITH perimeter systems The Gallagher Trophy FT electric fence system is a fully integrated option on the Gallagher security platform enabling full configuration, control and monitoring of the electric fence system Gallagher s software controlled electric fence system delivers advanced perimeter security through Gallagher s sophisticated integration platform: Command Centre software and the Controller This enables sites to manage system-wide security through one management platform, through a single user interface. Gallagher electric fence perimeter security systems are founded on two core principles: 10

13 command and control platform i. Active Deterrent Incorporating purpose-designed electric fences, Gallagher systems actively deter attempts to breach the perimeter by delivering a safe, non-lethal shock to the would-be intruder ii. Detection Attempts to breach the fence are detected and generate alarms providing information for an appropriate response. The integrated solution provides the opportunity to implement layered security, from the outside in. INTEGRATION WITH IMAGING SYSTEMS Event information in the Gallagher security platform is complemented with images from CCTV, DVR and NVR systems. The Gallagher security platform provides a visual and auditable record of system events which can be relied upon to provide evidence if needed. Gallagher s security platform has been integrated with many imaging systems. Contact us for the latest information. Gallagher s Challenge functionality provides the ability to double-check the visual identity of cardholders passing through a nominated door using visual comparison of a cardholder image against a live image from an imaging system. INTEGRATION WITH BIOMETRIC SYSTEMS Integration between the Gallagher security platform and Morpho fingerprint readers provides a fully integrated biometric access control solution. INTEGRATION WITH WIRE FREE READERS Gallagher has developed a high level integration between its Command Centre software and Salto offline readers, delivering cost-effective access control for lower security doors. The high level integration between Gallagher Command Centre and Aperio online readers by ASSA ABLOY delivers cost effective electronic access control for lower security doors. INTEGRATION WITH LONG RANGE READERS Gallagher and Nedap AVI have developed a Gallagher security platform enabled variant of Nedap s long range automatic vehicle identification (AVI) system. The integration enables driver and vehicle identification and access control to be managed and monitored via the Gallagher security platform. 11

14 command and control platform Gallagher Command Centre Integration Platform FLEXIBLE HIGH LEVEL INTEGRATION OPTIONS Using the data available via the OPC (Alarms and Events) interface and the XML interface, the ability to integrate Gallagher s security platform with other business systems delivers efficiencies and cost savings. > Cardholder Import/Export enables cardholder data to be shared with external sources such as PeopleSoft and SAP HR systems enabling single source of cardholder data entry and maintenance. > Enterprise Data Import Interface is an optional application which enables Cardholder data within external enterprise systems to be automatically reflected in the Gallagher security platform database. This ensures data integrity and reflects business approved changes to Cardholder information and access rights. > Schedule Import provides the ability to integrate third party scheduling systems with Gallagher s security platform. This enables changes in the external system to change the access control schedules in Gallagher s security platform automatically. > Gallagher s security platform can be integrated with Building Management Systems to achieve efficiencies such as savings in lighting and air-conditioning. > The Gallagher Controller API for alarms and events enables live event data from third party systems to be bi-directionally interfaced to Gallagher s security platform. This ensures continuity of integrated functions such as DVR should the Command Centre server be unavailable. Refer to the Gallagher API datasheet for more information. Gallagher has a continuing R&D program for system development. Please contact us for further information on interface options. Integration delivers cost and time efficiencies and improves data integrity. 12

15 command and control platform Gallagher Command Centre leverages a client-server architecture, enabling system operators to: > Configure and control the site and all system components > Manage cardholders, including their access > Monitor alarms and interact with the system > Retrieve and report on stored system information. Features that are core to the system include: > Configuration wizards and templates to assist with installation and site maintenance > Tailored site plans that act as a graphical representation of the site, and reflect the real time status of items > Full alarms management, with the ability to channel all alarms from integrated systems through the Gallagher s security platform appropriate action > Comprehensive searching and reporting options > Extensive operator privileges to control who can view and edit information > System division, enabling the system to be segmented for management and monitoring purposes > Cardholder Import for sharing cardholder data with other people management systems enabling a single source of data entry and maintenance > Integration support for imaging, elevator and digital intercom systems. Gallagher s security platform caters for small, single sites through to large multinational, enterprise wide installations, ensuring scalability as systems grow. Further desirable optional features include: > PhotoID to record images within each cardholder record and print photo identification cards together with card encoding (Gallagher platform format magstripe and Mifare cards) > The ability to add further workstations > Integration with Gallagher perimeter security systems > Integration with Morpho fingerprint readers for a full integrated biometric access control solution > Integration with Nedap long range automatic vehicle identification (AVI) system > Integration with Salto offline readers > Integration with Aperio online readers by ASSA ABLOY. Multi -Server Support The Multi-Server feature in Gallagher Command Centre supports peer to peer communications between multiple servers, which improves the ability of Gallagher s security platform to operate effectively in a distributed environment. This distributed environment may include multiple sites separated by large geographical distances and connected via low bandwidth and/or intermittently available networks. For more information, please refer to the Gallagher Command Centre brochure available from 13

16 14

17 command and control platform Gallagher Software Maintenance Maximise the value from your Gallagher security platform: maintain it through Software Maintenance Software Maintenance Gallagher Software Maintenance provides a cost-effective means of obtaining future upgrades and ensures sites keep pace with developments. It enables sites to: > Keep pace with technology and Microsoft operating platform releases > Benefit from releases that will enhance system performance > Receive new core Gallagher security software functionality > Elect new optional features and the support for new hardware devices The first year of Gallagher Software Maintenance is included with the purchase of Gallagher Command Centre. The only prerequisite is that the Software Maintenance documentation is completed within 60 days of the date the site licence was created. More information about Software Maintenance is available from The system that evolves with you 15

18 16

19 Software Controlled Systems edge devices Native IP based distributed intelligence delivers robust and uninterrupted security. 17

20 edge devices Gallagher Field Controllers The Controllers are designed with peer-to-peer communications enabling security operations in the field independent of the Command Centre and flexible and cost efficient system design. Gallagher Controllers are intelligent field controllers, programmed to make access control and intruder alarm decisions and execute and enforce business policy in the field, independent of the Gallagher Command Centre. This means in the event network communications are disrupted, security is maintained on site. Providing flexible configuration options to meet specific site requirements, Gallagher Controllers: > Support peer-to-peer communications with any Gallagher Controller over a LAN/WAN for the purposes of monitoring, back-up, and control independent of the Command Centre > Utilize programmable logic to enable full inter-controller logic functionality independent of the Command Centre > Communicate with the Gallagher Command Centre using native TCP/IP over an Ethernet network > Support downloadable code for software upgrades. Gallagher Controllers support event association from edge devices and field sensors. 18

21 edge devices Gallagher Controller 6000 GALLAGHER co ntroller 6000 As one of the key integrated components for Gallagher systems, Controller 6000 provides distributed intelligence in the field, managing access control and security functions independently of the Gallagher Command Centre. controller 6000 In addition, it has the ability to physically enforce business rules, be aware of its environment, communicate with other systems nearby and make enriched access decisions based on variables from these systems. There are two variants: the Controller 6000 and the Controller 6000 High Spec (HS). The Controller 6000 is a powerful modular, intelligent field controller for processing, storing and communicating large amounts of data in real time. The Controller 6000 database is capable of supporting up to a maximum of 500,000 card records and 80,000 events for access control functions. Refer to the Controller 6000 datasheet for more information. 19

22 edge devices Gallagher Access control readers Gallagher provides access control readers to cater for all levels of security throughout a site. Whether you require fully wired and monitored readers, biometric, wire free or long range, Gallagher has a solution for all scenarios. gallagher t series readers gallagher prox readers Gallagher t series Readers The Gallagher T Series Reader range features contactless proximity card readers for access control management in the Gallagher security integration platform. Available in both the standard black and white colour options with matching bezels Gallagher T Series Reader range can also be customized with a premium range of striking satin silver or gold bezels to complement an extensive array of interior and exterior decors. Gallagher T10 Reader The Gallagher T10 Reader is a slim mullion reader. It supports the following Mifare technologies: > Mifare Classic > Mifare Plus > Mifare DESFire EV1. Gallagher T11 Reader The Gallagher T11 Reader has been designed to be mounted on vertically oriented flush boxes. It is available in two variants: > As a Mifare reader supporting Mifare Classic, Mifare Plus and Mifare DESFire EV1 > As a Multi Technology reader supporting the three Mifare technologies and 125kHz proximity technology. Gallagher T12 Reader The Gallagher T12 Reader has been designed to fit over wider BS (British Standard) flush boxes. It is also available in two variants: > As a Mifare reader supporting Mifare Classic, Mifare Plus and Mifare DESFire EV1 > As a Multi Technology reader supporting the three Mifare technologies and 125kHz proximity technology. gallagher Prox Readers Gallagher Prox readers are card only readers, providing fast, secure access by simply passing a card or other transponder across the face of the unit. The readers provide visual (LED) and audible (beeper) feedback to the user. The Mifare / 125 khz standard readers are available with an optional cradle base enabling them to be mounted over standard international flush boxes. The teardrop reader option has a very small footprint, allowing installation on narrow mullions, providing a discreet installation profile. An optional vandal resistant cover is available. 20

23 edge devices gallagher prox plus (mifare series) gallagher protective reader covers gallagher Prox Plus Readers Gallagher Prox Plus readers are featurerich readers incorporating a PIN pad allowing card only or card plus PIN operation where higher security than card only is required. All Prox Plus readers include: > A back-lit keypad for PIN entry and the arming and disarming of alarms > A LCD panel to provide user feedback icons making the system easy to use internationally. Protective Reader covers Designed to look tough and be tough, Gallagher Protective Reader Covers provide increased protection for readers. Available for: > Gallagher T10, T11 and T12 Readers > Prox Reader (teardrop only) > Prox Plus Readers > Gallagher Intelligent Door Terminal Cardax IV Proprietary Card Format With the Cardax IV proprietary format, enhanced data protection is achieved via: > Encoding of issue level and region code in addition to facility code and card number, providing unique card data across global card databases > Using 8 bit error detection protocol, ensuring that the reader correctly identifies the card being presented by the cardholder. 21

24 edge devices Access control readers for Gallagher systems morpho j series reader morpho ma520+ reader aperio cylinder Morpho Biometric Readers High level integration between the Gallagher platform and Morpho fingerprint readers provides a full integrated biometric access control solution. The integration provides seamless fingerprint enrolment and template management from within the Gallagher user interface. Only the relevant fingerprint templates are sent to each reader, saving reader database space and cost. The readers immediately reflect schedule and access group changes in Gallagher Command Centre. Advanced Gallagher Command Centre functionality including Anti-passback, Duress Fingers, Dual Authorisation, Zone Counting, Interlocking Doors and Controlled Challenge are all available with Morpho fingerprint readers, providing comprehensive, full access control at the touch of a finger. Aperio Wireless Readers Gallagher supports the revolutionary Aperio wireless access control solution developed by Assa Abloy. The unique high level integration between the Gallagher platform and Aperio online readers, delivers cost effective, electronic access control. It provides an ideal alternative to keyed doors. The Aperio integration is particularly suited to doors that: > require some level of security, but the cost of a fully wired and monitored door cannot be justified > do not require door status monitoring > do not require access mode changes. 22

25 edge devices salto wireless and wired readers nedap long range readers Salto data on card and Wireless Readers The high level integration between the Gallagher platform and Salto readers delivers cost effective, electronic access control. It is particularly suited to doors that: > require some level of security, but the cost of a fully wired and monitored door cannot be justified. > do not require real time monitoring. > generally do not require access mode changes. Nedap Long Range Readers Gallagher and Nedap AVI have developed a Gallagher platform enabled variant of Nedap s long range automatic vehicle identification (AVI) system. The integration enables driver and vehicle identification and access control to be managed and monitored via Gallagher Command Centre. The Nedap AVI system provides long range vehicle and driver identification. 23

26 edge devices Gallagher Keypads for alarms management gallagher intelligent door terminal gallagher remote arming terminal gallagher remote arming terminal Gallagher Intelligent Door Terminal The Gallagher Intelligent Door Terminal extends beyond card plus PIN functions to incorporate digital intercom and an advanced user interface. As a LOCAL BUS device, the Intelligent Door Terminal is supported by the Controller 5000GL. Incorporating a dot matrix LCD, keypad and digital intercom, the Intelligent Door Terminal (IDT) is a feature-rich reader for high security access control. > Intruder alarms can be armed (set) and disarmed (unset) by authorised cardholders > The back-lit dot-matrix LCD enables prompts, time and date, feedback and cardholder names to be displayed at the reader > If an alarm is triggered, an operator can activate the intercom to listen to what is happening in the area. Gallagher Remote Arming Terminal The Gallagher Remote Arming Terminal is a GBUS device. The Remote Arming Terminal is a versatile, user-friendly keypad interface for intruder alarm monitoring and control. Installed within the protected alarm zone, the Remote Arming Terminal allows users to monitor, arm (set) and disarm (unset) various alarm zones (areas of the intruder alarm system.) As a GBUS device, the Remote Arming Terminal is supported by all the Controllers. Each Remote Arming Terminal can control up to 30 alarm and fence zones and up to 100 inputs located on any Controller residing on the same network. Users are assigned privileges to perform functions such as arm, disarm, or isolate alarm and fence zones (individually or all at once), and view and acknowledge alarms. Secure logon is provided through entering a user code on the keypad, or alternatively using a Gallagher reader in conjunction with the Remote Arming Terminal. For sites which implement Cardholder competencies, the Remote Arming Terminal can provide on screen text feedback to cardholders about their pending competency expiries and the corrective action required to prevent access denial, or the action required to reinstate competencies if access has been prevented. Refer to the Remote Arming Terminal datasheet for more information. 24

27 edge devices gallagher trophy ft keypad Gallagher Fence Keypad The Gallagher Fence Keypad enables authorized users to manage and monitor alarm zones, fence zones and inputs onsite for effective alarms management. the user to perform actions which they are privileged to perform. For more information please refer to the Gallagher Fence Keypad datasheet. The Gallagher Fence Keypad provides a user interface for alarms management in the field. Key features of the Gallagher Fence Keypad include: > A keypad for PIN entry and arming and disarming of alarm zones > Real-time information on fence zones voltages and the status of alarm zones and inputs > Viewing and acknowledging alarms > One step logoff key for quick and simple exit > A graphical LCD capable of displaying messages and prompts > Context sensitive function keys enabling 25

28 edge devices Gallagher I/O Expansion Devices - GBUS gallagher I/o expansion devices - gbus GBUS devices include the Remote Arming Terminal and cost effective I/O expansion options for system inputs and outputs, and reader connections. All the Gallagher Controllers support a range of GBUS devices to provide cost effective configuration options. In addition to security requirements, the devices can be used to monitor inputs and control outputs to meet other requirements such as temperature monitoring. 8-Input Expansion Interface The 8-Input Expansion Interface provides connections for up to 8 balanced inputs. I/O Expansion Interface The I/O Expansion Interface provides connections for up to 8 balanced inputs and 4 relay outputs. High Density I/O Interface The High Density I/O Interface provides connections for up to 16 balanced inputs and 16 relay outputs. GBUS Universal Reader Interface The GBUS Universal Reader Interface provides connections for 8 inputs, 2 outputs, and 2 Gallagher readers or 1 Wiegand reader. Configured in conjunction with the Gallagher Controller, the GBUS Universal Reader Interface will deliver a cost effective solution for retrofitting sites using a daisy-chained RS-485 wiring structure. The GBUS Universal Reader Interface Wiegand variant is a 2x Wiegand reader variant. It provides connections for 2 Wiegand readers only and 4 inputs and 2 outputs. cabling over long distances. For more information please refer to the Gallagher GBUS I/O Devices data sheet. 26

29 edge devices trophy ft fence controller Gallagher Trophy FT Fence Controller The Gallagher Trophy FT Fence Controller is a key component in Gallagher s software controlled electric fence security system. Gallagher Trophy FT Fence Controllers monitor and control fence zones, actively deterring and detecting intruder attempts. The Gallagher Trophy FT Fence Controller is a GBUS device in the Gallagher security system. security if AC power fails > Differentiating maintenance warnings from real security alerts to help sites action an appropriate response. For more information please refer to the Gallagher Trophy FT Fence Controller data sheet. They do this by sending regulated electrical pulses around configured high voltage fence zones (sections) of the physical perimeter fence. The pulse interval and power level are properties configured for the Gallagher fence controller. Key features of the Gallagher Trophy FT Fence Controller include: > High voltage zone separation to ensure that if an intruder attacks one zone of the fence, the performance of the remaining zones is not affected > Voltage monitoring to detect and report an alarm should the earth system be compromised > Pulse synchronization to enable the Trophy FT Fence Controller to be integrated with other electric fences in close proximity > Smart battery back up to maintain site 27

30 edge devices d10 & d21 Sensors Gallagher D10 and D21 Intrusion Detection Sensors Gallagher s integration of new perimeter intrusion detection sensors extends the capability of the Gallagher system in managing and monitoring perimeter security. D10 - Measures the mechanical disturbance of a tensioned fence wire. When a fence wire is disturbed through an attack, the balance of tension will be altered creating an alarm in the monitoring system. This integration allows multiple perimeter deterrent and detection technologies to be combined and utilized in conjunction with access control and intruder alarm management, all on one software platform. For more information please refer to the Gallagher Intelligent Intrusion Detection brochure. D21 - Measures energy transferred within a physical structure when it is disturbed - the sensor analyses the information and signals an alarm event in the Gallagher Command Centre when certain alarm thresholds are exceeded. The D21 Sensor is suitable for all metallic type structures including perimeter fence lines to internal and external walls and floors. Integration between the Gallagher Controller 6000 and D10 or D21 disturbance sensors offers proven and sophisticated detection systems for both the perimeter fence and other structures. The Gallagher system can include: > D10 sensors only, > D21 sensors only or > A combination of both to provide ultimate detection coverage. 28

31 edge devices Gallagher Fence Integrity Monitor fence integrity monitor The Gallagher 3 Zone Fence Integrity Monitor is a three zone alarm detector that can operate on the perimeter fence. An optional product for Trophy FT systems, it enables the detection of fence damage without the deterrent feature of the active, high voltage electric pulse. For more information, please refer to the 3 Zone Fence Integrity Monitor datasheet. 29

32 30

33 System Components Gallagher end-to-end solutions include a wide range of complementary components to meet all your security system requirements. 31

34 system components Gallagher Cards, Keyfobs and Encoding A RANGE OF cards and keyfobs FOR DIFFERENT READER TECHNOLOGIES IS AVAILABLE ENCODER III software, ENCODER 125 khz, ENCODER mifare Cards & transponders The Gallagher system is compatible with the following range of technologies in cards and transponders: > Mifare Plus > Mifare DESFire EV1 > Mifare Classic > 125 KHz > TIRIS > Magstripe Nedap Long Range Transponders > Gallagher security platform enabled Card Boosters (Mifare or 125kHz) > Nedap Window Button > Window Button Switch > Heavy Duty Tags > Compact Tags card Encoding Gallagher has several options available for the encoding of Mifare and 125kHz cards. You can take advantage of Gallagher s card encoding service, or encode your cards easily on your site via Photo ID & Encoding Command Centre feature. Refer to the Gallagher PhotoID datasheet for more information. 32

35 system components Gallagher Cabinets gallagher cabinet There are two housing options for the Gallagher Controller and I/O Expasion Device printed circuit boards (PCBs). The sizes of the individual PCBs vary and are designed to be proportional to the footprint of the Cabinets. 1. The Gallagher Single Cabinet is manufactured from a strong polycarbonate/abs plastic alloy, the Cabinet provides one footprint for Gallagher field Controllers and GBUS I/O PCBs. Optical tamper protection is provided for both the front and rear, for those PCBs supporting tamper protection. dual cabinet 2. The Gallagher Dual Cabinet is a secure steel enclosure accommodating two footprints, doubling the housing capacity for any combination of Gallagher PCBs. When the PCB is installed in accordance with the Installation Instructions, optical tamper protection is provided for both the front and rear of the Cabinet. The Cabinet is available with an optional 8 Amp power supply which has visible indicators for low mains and low battery power monitoring. The cabinet can house up to 4 7Ah batteries within the enclosure. 33

36 system components Gallagher Electric Fence electric fence components Diagnostic Tools Gallagher Channel Partners and customers have access to a range of diagnostic tools to analyze faults. These include: > Digital volt meters to display fence voltage to enable tracing and servicing fence line conditions > Fence impulse analyser to analyze all variables related to the operation of the Gallagher perimeter fence for example, energy, peak voltage, peak current, pulse duration and interval. Security Posts Gallagher security posts are available in a range of lengths and thicknesses to accommodate both the site s security and environmental requirements. Key features include: > Pointed tips to prevent intruders from climbing over the fence > Pre-punched holes for insulators and offset mounting blocks to assist installation > Roll-formed to increase strength > Fully hot dipped to galvanise the steel posts at the end of the production process, protecting all surfaces from corrosion. Insulators, Hooks and Springs Gallagher insulators, hooks (strains) and springs have been specifically designed to meet security requirements. Options are available to accommodate a wide variety of installation applications including corners, gates and fence termination. Wire Gallagher wire options include: > High tensile steel fencing wire which is fully galvanised coated to prevent corrosion > High conductivity fencing wire which never rusts. These are made of an aluminium alloy to help maintain the pulse strength right through to the end of the fence. Double Insulated Cable Gallagher cable is available for undergate and lead-out applications. The cable is double insulated to guarantee high voltage insulation even when submerged in water. A high conductivity option is available to accommodate lead-out cabling over long distances. 34

37 system components electric fence components Everything you need There is an extensive range of high quality perimeter fence components to accommodate full height or wall top applications: > Intermediate posts and rods > Insulators > High voltage cables > Sleeve insulators and caps > Wall top strain support posts > High performance earth stakes and clamps > Hardware to secure gates > Warning signs > And more The following products described are examples to demonstrate the consideration that has gone into each product that together make up Gallagher perimeter security systems. For more information, please contact your Gallagher Channel Partner or Gallagher Business Development Manager. 35

38 36

39 Standalone Systems electric fence systems Gallagher electric fence systems provide total perimeter security, effectively detecting and deterring intruders without false alarms. 37

40 electric fence systems Gallagher Trophy 6 trophy 6 fence controller & keypad The Trophy 6 system offers a total perimeter security solution for medium to high security sites and can be configured to suit a wide range of specialist applications. Trophy systems are high feature systems with multiple channel controllers. The Trophy 6 system can be configured to control and monitor up to 6 electric fence zones with up to four alarm inputs. The Fence Controller sends regulated electrical pulses along each fence channel. The returning pulses are monitored. Any attempt to climb the fence, disable the fence or cut the wire is detected. The system includes one or two 3-channel fence controllers and an intelligent keypad for remote access. T he keypad is the control point and makes all the decisions for the system. The technology used in the Gallagher Trophy systems facilitates advanced features such as smart battery backup, earth voltage monitoring, pulse synchronisation, zone identification, high voltage zone separation and selectable zone control. The Trophy 6 system can also be integrated into other building management systems such as access control and monitoring equipment such as CCTV. Refer to System Components: Gallagher Electric Fence of this Systems Catalogue for Gallagher Trophy 6 system componentry. 38

41 electric fence systems Gallagher Medal medal 501 fence controller Medal systems are cost-effective solutions designed for light commercial or domestic applications. They provide effective and compatible perimeter security solution with single channel controllers. Refer to System Components: Gallagher Electric Fence of this Systems Catalogue for Gallagher Medal system componentry. For more information contact your Gallagher Certified Partner. These systems are widely installed on commercial sites where an active system to effectively detect and actively deter intruders, without nuisance alarms, is required. Medal systems can be integrated with security monitoring equipment, such as sirens, lights, key switches and time relays. The Gallagher Trophy 6 and Medal can be tailored and configured to suit individual needs. Medal systems are also available as Walltop Kitsets. 39

42 40

43 System Diagrams 41

44 system diagram - software controlled system 42

45 43

46 system diagram - standalone system Gallagher Trophy 6 44

47 system diagram - standalone system Gallagher Medal Walltop 45

48 About Gallagher Established in 1938, Gallagher Group Ltd is the operating company for an international organisation which encompasses research and development, manufacturing and marketing of its security, fuel pump and animal management systems. 46

49

50 Gallagher World Headquarters Kahikatea Drive, Hamilton 3206 Private Bag 3026, Hamilton 3240 New Zealand TEL: sales@security.gallagher.co REGIONAL OFFICES New Zealand Americas Asia Australia India Middle East South Africa United Kingdom / Europe Disclaimer: System configuration, network capacities and the volume of system activity affect performance. Please contact Gallagher for advice. In accordance with the Gallagher policy of continuing development, design and specifications are subject to change without notice. Gallagher Group Limited is an ISO 9001:2008 Certified Supplier. Copyright Gallagher Group Limited All rights reserved. 3E /11