Table of Contents. 1 Building Management. 2 Building management systems. 2 EIT 8 Wiring installation using Instabus KNX
|
|
- August Griffin
- 5 years ago
- Views:
Transcription
1 Table of Contents Table of Contents 1 Building Management 2 Building management systems 2 EIT 8 Wiring installation using Instabus KNX 3 EIT 8.1 Lighting and blind/shutter control using KNX 5 EIT 8.2 Special applications: monitoring, heating, weather, visualization, lines - and field coupling to KNX EIT 8.3 Smart homes using existing bus systems Lucas Nülle GmbH Page 1/26
2 Building Management Training systems / trainers for electrical wiring/building management systems: Protective circuitry, protective measures, building mains feed, lighting and intercom systems Industrial wiring, intercoms, alarm systems, hazard alarms and access control KNX/EIB, LON Project work, technical practice, assembly practice systems, planning software Building management systems Building management systems Building management covers all aspects of advanced modern wiring installation. Nowadays, more and more things are being automated. In addition, such matters as energy saving, protection of the environment and safety of course have a key role to play as well. Building management systems of such a kind often consist of programmable bus systems which can be connected together as needed. The training course conveys basic knowledge and some small-scale applications can then be implemented. Lucas Nülle GmbH Page 2/26
3 Lighting management using DALI Lighting management nowadays means more than just flexibility, energy saving and comfort. DALI stands for Digital Addressable Lighting Interface and is a protocol for digital communication between electronic lighting controls and appliances (electronic ballast units, transformers etc.). The new comprehensive system, consisting of a controller, sensor, extender and buttons, is characterised by the option of programming with or without computers or an overarching bus system. Configuration of the buscontrolled lighting system can be handled entirely by means of the display integrated into the controller with the help of a push-button rotary switch. Light management covers all areas of public life, including the following: Living room and building lighting Special effects lighting Industrial and street lighting Emergency and escape route lighting Lucas Nülle GmbH Page 3/26
4 EIT 8 Wiring installation using Instabus KNX EIT 8 Wiring installation using Instabus KNX The demands on electrical wiring in buildings continue to grow in step with the latest developments in technology. The modern electrician must come to terms with this development. The following topics build on conventional wiring installation and indicate a new way of assembling building management systems. In addition to the standard wiring network a bus system is required in order for the individual terminal devices to communicate. All terminal devices have intelligent software and are programmed with a PC. This is a decentralised system in which the PC is used exclusively for programming. Fundamentals of an KNX installation bus Preparation and installation of an KNX project Programming on-off functionality to demonstrate how programming of devices is accomplished Programming an intermediate (two-way) circuit Including conventional switches in an KNX project Programming centralised functionality Switching and dimming lights Control of blinds and curtains Lucas Nülle GmbH Page 4/26
5 EIT 8.1 Lighting and blind/shutter control using KNX EIT 8.1 Lighting and blind/shutter control using KNX Training contents: Fundamentals of an KNX installation bus Preparation and installation of anknx project Programming on-off functionality to demonstrate how programming of devices is accomplished Programming an intermediate circuit Including conventional switches in an KNX project Programming centralised functionality Switching and dimming lights Control of blinds and curtains Lucas Nülle GmbH Page 5/26
6 Basic equipment set, consisting of: Basic equipment set, consisting of: Pos. Product name Bestell-Nr. Anz. 1 EIB compact lighting and roller blind control board, basic equipment CO3109-9A 1 The panel provides a basic unit for any subsequent KNX/EIB experiment sets. The panel accommodates the conduct of a comprehensive range of experiments on lighting control, dimming and control of blinds. It includes the following components: EIB power supply with choke EIB-USB interface EIB dimmer unit EIB 8-way actuator switch EIB 2-way actuator for blinds EIB 4-way push button EIB 2-way push button EIB 2-way button interface Conventional multi-circuit switches Mains switch, illuminated Phase indicator light, red Technical data Operating voltage: V/ Hz EIB bus voltage: 30V DC Mains inputs/outputs: 4mm safety sockets Bus inputs/outputs: 2mm safety sockets Dimensions: 297 x 456 x 160mm Weight: 3.2kg Lucas Nülle GmbH Page 6/26
7 2 EIB room simulation with various overlay masks CO3209-9J 1 The panel is designed for project-oriented display of applications for various KNX/EIB projects. It can be used purely for room simulation or as a central monitor display. The various overlays mean the board can be used for a wide variety of projects. This flexibility can be enhanced by means of additional project-based overlays. Technical data 4 Overlay masks for room simulation 4 Blinds, two of which can be used as curtains 12 Lamps, 230V, dimmable Lamps can also be used for visualisation of heating simulation Operating voltage: 230V/50Hz EIB bus voltage: 30V DC Mains inputs/outputs: 4mm safety sockets Bus inputs/outputs: 2mm safety sockets Dimensions: 297 x 456 x 160mm Weight: 1.5kg Lucas Nülle GmbH Page 7/26
8 Media: Pos. Product name Bestell-Nr. Anz. 3 Interactive Lab Assistant: Basic course in building automation using KNX SO2801-3K 1 The Basic course in building automation using KNX utilises a project called "Renovation of an old building using KNX" to teach basic skills for defining a KNX system, constructing it, configuring it, setting its parameters and putting it into operation. Training contents: Installation and use of ETS application software Fundamentals of KNX (bus system, transmission media, topology, bus devices, physical addresses, group addresses, circuit symbols) Standard lighting Timer functions Centralised function Use of existing appliances Dimmers Blinds Diagnostics Documentation Course duration: 12h The multimedia experiment software with virtual instruments, instructions and documentation of results on the topic of "Building automation using KNX (fundamentals)" included: Interactive experiment set-ups Questions with feedback and evaluation software for monitoring student progress Printable document to allow easy printing of experiment instructions with solutions Available in German, English, French, Spanish, other languages available on request CD-ROM with Labsoft-Browser, course software and supplementary software for external measuring instruments Lucas Nülle GmbH Page 8/26
9 Accessories: Pos. Product name Bestell-Nr. Anz. 4 Safety measurement cable (4mm), 25cm/10", black SO5126-8B 13 Safety measurement lead with stackable, contact-proof 4mm plugs colour: black length: 25 cm cable cross-section 2,5 mm 2 ratings deliver: 600V CAT II, 32A 5 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 1 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour blue 6 Safety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II SO5126-3W 1 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour green/yellow Lucas Nülle GmbH Page 9/26
10 7 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 2 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour black 8 2mm safety measurement cable, 3cm, black SO5126-7X 4 Plugs: 2mm Length: 3cm Colour: black Load capacity: 10A 9 USB cable A-B LM USB cable Lucas Nülle GmbH Page 10/26
11 10 Mobile aluminium experiment stand, 3 levels, power strip with 6 sockets, 1250x700x1995mm ST7200-3A 1 High-quality, mobile experiments stand from the SybaPro range for demonstrations and experiments. Features aluminium profile legs compatible with all add-ons and extensions for the SybaPro system. The mobile experiment stand is supplied in kit form and needs to be assembled by customers themselves. Table top: Frame: Dimensions: 30-mm table top made of highly compressed, multi-layer fine chipboard conforming to DIN EN Colour grey, RAL 7035, with 0.8-mm slightly textured laminate coating (Resopal) on both sides, conforming to DIN Resistant to many chemicals and reagents including dilute acids and alkalis Resistant to heat, e.g. molten solder or heating at specific points such as by soldering tips or cigarette ends Table top with solid impact-resistant protective edging made of 3mm thick RAL 7047 coloured plastic Coating and adhesive are PVC free Power strip with 6 outlet sockets mounted underneath the table top, lead and earthed plug 2 extruded aluminium profiles with multiple grooves 1800 x 120 x 40 mm (WxHxD) 8 equally sized grooves in extruded aluminium profiles (3 on each side and 1 each on the front and back) Grooves accommodate standard industrial mountings 4 H-shaped aluminium profiles, 1150 mm, for 3-layer organisation of DIN A4 panels Space for extension of power supply duct Base made of rectangular tubing with 4 swiveling double casters, 2 of which have brakes Table frame made of tough combination of rectangular tubing around the full perimeter Acid-resistant epoxy-resin coating, 80 µm thick (approx.), colour RAL 7047 Height of table top 760 mm 1250 x 1995 x 700 mm (WxHxD) Lucas Nülle GmbH Page 11/26
12 11 PC holder for SybaPro experiment trolleys, height/width adjustable ST7200-5F 1 Shelf for desktop PC made of 2mm sheet steel punched with holes, suitable for all furniture in the SybaPro aluminium profile range Adjustable assembly height for slim PCs, adjustable width (60-160mm) Can be mounted to left or right Includes all equipment necessary for assembly (4 bolts and 4 tenon blocks) Acid-resistant epoxy-resin powder coating, 80µm thick approx., colour RAL Wall or aluminium-profile mounting cable storage for 48 cables ST8003-8E 1 Accommodates about 48 safety measuring leads (4mm), suitable for mounting on walls or aluminium profiles Width 200 mm, 12 guide grooves for leads Adjustable height for mounting on aluminium profiles Can be mounted on the left or right Can be mounted on walls Includes 2 screws and tenon blocks Acid-resistant epoxy-resin powder coating, thickness 80 µm approx., colour RAL 7047 Lucas Nülle GmbH Page 12/26
13 13 Monitor holder for flat screen monitor of weight up to 10kg/22lb, VESA 75/100 ST8010-4L 1 Pivoting monitor holder for attachment to aluminium profiles of furniture in the SybaPro range. Allows a monitor to be placed in the optimum position so that work and experiments are less tiring. Pivoting arm with two-part joint Quick-lock for adjustment to any height on extruded aluminium profile VESA fastening 7.5 x 7.5cm Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter 2 Cable clips Adequate carrying capacity 10kg/22lb TFT monitor can be turned parallel to the table edge Separation can be adjusted to anywhere between 105 and 480mm Additionally included: Cable management set for installing cables along the profiles of the aluminium lab system furniture in the SybaPro range The set consists of the following: 3 Cross cable binders for front and rear grooves of aluminium profile 3 Cross cable binders for side grooves of aluminium profile 12 Cable binders 4 Aluminium cover profiles for covering and enabling wires to be run along the grooves of an aluminium profile Includes assembly instructions 14 Protection cover for three-level experiment trolleys ST8010-9Y 1 Dust cover for three-level experiment trolleys For protecting equipment from dust and damp For keeping equipment out of sight (the cover must not be transparent, so is therefore opaque) Colour: matt dark grey with printed LN logo in orange) Material: nylon fabric with polyurethane coating High resistant to tearing, impregnated to be washable and waterproof Lucas Nülle GmbH Page 13/26
14 Software: Pos. Product name Bestell-Nr. Anz. 15 ETS 5 Lite software for KNX / EIB (single licence) + dongle (D,GB,F,E) SO4001-4L 1 ETS4 is the latest ETS generation, directly following on from the ETS3 release. Very many improvements have been made in ETS4 compared to ETS3. Caution: limited to no more than 20 products (sufficient for educational needs) Support for all common 32-bit and 64-bit Windows operating systems Uses the latest Windows 2008 Server components for the ETS4 database Multi-monitor support (PC screens) Automatic software updates Import of KNX project/product data Switching between various KNX elements such as objects and group addresses plus search capability Separate tree and list searches Integrated KNX device parameter dialog in ETS4 interface. Single-click walk-through option for all parameter dialogs Separate administration of KNX bus interfaces for KNX monitors and ETS4 You can define your own dynamic views (e.g. devices with specific names or addresses) Group addresses may be structured as desired, even with more than three levels Uses complete 16-bit address space for group addresses Project wizard for rapid drafting of building structures Automatic software updates in background Online project diagnostics for analysing wiring errors Flexible KNX bus/group monitor with controllable display options plus new filters and trigger conditions Display of bus load Lucas Nülle GmbH Page 14/26
15 EIT 8.2 Special applications: monitoring, heating, weather, visualization, lines - and field coupling to KNX EIT 8.2 Special applications: monitoring, heating, weather, visualization, lines - and field coupling to KNX With special applications acquired during basic course knowledge is further deepened and expanded. Monitoring system Training contents: Heating control Training contents: Room monitoring Using the info displays Evaluation of reports KNX - Triton - button 3 - fold with display KNX - motion and presence detector KNX - button - Interface Window, door and bolt switch contacts Heating control for room temperature Heating control with frost protection setting How room temperature control reacts to disturbance variables Automatic summer/winter adaptation Presence control Weather station Training contents: Detecting weather conditions via sensors Power supply to sensors Processing analogue readings using KNX/EIB Processing and display of analogue signals Wide-area coverage Training contents: Extending a bus system using a single-line topology to one using wide-area topology Additional power supply for various areas and bus lines Adding extra devices Adding extra USB ports Operation and visualisation Lucas Nülle GmbH Page 15/26
16 Training contents: Setting up a touch panel for operation Programming a touch-panel Graphic display on a touch-panel Supplement to basic set, consisting of: Supplement to basic set, consisting of: Pos. Product name Bestell-Nr. Anz. 16 KNX Compact Application Board, Air-conditioning, Heating, Ventilation, Security CO3109-9B 1 The application board for air-conditioning, heating, ventilation and security makes all the important components available for in-depth project work. Messages for the evaluation of various signals and operating states are displayed in an info-display or using LEDs. The board contains the following components KNX weather station 4-channel KNX air-conditioning controller for heating, ventilation and climate control KNX security controller with 4 monitoring lines KNX room thermostat KNX 360 intrusion alarm Window contact simulation 2 Door contacts Glass breakage sensor simulation Bolt switch contact Acoustic and optical alarm signalling simulation 4 analog inputs for sunlight brightness, rain, wind and outdoor temperature Summer/Winter switchover Room temperature simulation 3-step ventilator simulation Valve switchover for heating and cooling operation Technical data Operating voltage: 230V/50Hz KNX bus voltage: 28V DC Network inputs/outputs: 4-mm safety sockets Bus inputs/outputs: 2-mm safety sockets Dimensions: 297 x 456 x 160mm Weight: 2.5kg Lucas Nülle GmbH Page 16/26
17 17 EIB bus extension with line and range couplers, 4 extra bus devices CO3209-9E 1 The bus extension panel can be used to build various bus topologies. It concentrates on transmission of information to various areas or lines. The flexibility of KNX/EIB is very nicely demonstrated by these exercises. The panel includes the following components: EIB 640mA power supply with choke EIB choke EIB line/area coupler (x2) EIB USB interface EIB 3-way Triton button unit EIB single Triton button Technical data Operating voltage: 230V/50Hz EIB bus voltage: 30V DC Mains inputs/outputs: 4mm safety sockets Bus inputs/outputs: 2mm safety sockets Dimensions: 297 x 456 x 160mm Weight: 3.2kg Lucas Nülle GmbH Page 17/26
18 18 EIB visualisation using touch panel, internal temp. sensor CO3109-9F 1 This panel is for operation, monitoring and visualisation of EIB states and signals. Up to 80 standard functions (switching, dimming, control, measurement display etc.) can be reproduced. The equipment has a simple menu control system. The touch panels can be labelled as the user wishes. The touch panel can also be used as a monitor panel with acoustic feedback. The panel includes the following components: EIB room panel (touch display) MMC/SD card reader Single room temperature controller IR receiver Technical data Operating voltage: 230V/50Hz EIB bus voltage: 30V DC Display resolution: 1024x600 pixels Mains inputs/outputs: 4mm safety sockets Bus inputs/outputs: 2mm safety sockets Dimensions: 297 x 456 x 160mm Weight: 1.8kg Accessories: Pos. Product name Bestell-Nr. Anz. 19 2mm safety measurement cable, 60cm, black SO5126-7R 3 Plugs: 2mm Length: 60cm Colour: black Current capcity: 10A Lucas Nülle GmbH Page 18/26
19 20 2mm safety measurement cable, 60cm, red SO5126-7P 3 Plugs: 2mm Length: 60cm Colour: red Load capacity: 10A 21 2mm safety measurement cable, 30cm, red SO5126-7H mm safety measurement cable, 30cm, black SO5126-7K mm safety measurement cable, 3cm, black SO5126-7X 16 Plugs: 2mm Length: 3cm Colour: black Load capacity: 10A 24 Safety measurement cable (4mm), 50cm, black SO5126-8L 4 Safety measurement lead with stackable, contact-proof 4mm plugs Colour: black Length: 50 cm Wire cross section 2.5 mm 2 Rating data: 600V, CAT II, 32A Lucas Nülle GmbH Page 19/26
20 25 Safety measurement cable (4mm), 50cm, brown SO5126-8N 3 Safety measurement lead with stackable, contact-proof 4mm plugs Colour: brown Length: 50 cm Wire cross section 2.5 mm 2 Rating data: 600V, CAT II, 32A 26 Safety measurement cable (4mm), 50cm/20", blue SO5126-8P 3 Safety measurement lead with stackable, contact-proof 4mm plugs Colour: blue Length: 50 cm Wire cross section 2.5 mm 2 Rating data: 600V, CAT II, 32A 27 Safety measurement cable (4mm), 50cm, green/yellow SO5126-8R 3 Safety measurement lead with stackable, contact-proof 4mm plugs Colour: green/yellow Length: 50 cm Wire cross section 2.5 mm 2 Rating data: 600V, CAT II, 32A Lucas Nülle GmbH Page 20/26
21 28 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 5 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour blue 29 Safety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II SO5126-3W 5 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour green/yellow 30 Safety connecting plug 4mm with tap (2x), brown, 1000V/32A CAT II SO5126-3S 5 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour brown 31 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 1 Moulded insulation both sides with touch protection (safety plug + safety sockets), distance 19mm transition resistance max. 6mΩ rated data: 1000V/32A CAT II colour black Lucas Nülle GmbH Page 21/26
22 Media: Pos. Product name Bestell-Nr. Anz. 32 Manual EIT 8, EIB/KNX building management systems SH5001-1H 1 High-quality, bound, colour teachers manual with rigid spine, including solutions. CD-ROM with additional students manual, including exercises and worksheets. Details: Theoretical background Colour CAD drawings for experiment set-ups and circuits Exercises and worksheets Printed on high-quality 100-g/m² colour copy paper, book cover on 210-g/m² glossy paper Training contents: Installing and running ETS Project 1: Setting up a KNX/EIB installation Project 2: Adding multi-circuit switches to a KNX/EIB system Project 3: Adding centralised functions and dimmers to a KNX/EIB system Project 4: Adding blinds to a KNX/EIB system Project 5: Adding heating to a KNX/EIB system Project 6: Adding monitoring and security functions to a KNX/EIB system Project 7: Adding a weather station to a KNX/EIB system Project 8: Adding couplers to a KNX/EIB system Project 9: Adding a room panel to a KNX/EIB installation Lucas Nülle GmbH Page 22/26
23 Software: Pos. Product name Bestell-Nr. Anz. 33 ETS 5 Lite software for KNX / EIB (single licence) + dongle (D,GB,F,E) SO4001-4L 1 ETS4 is the latest ETS generation, directly following on from the ETS3 release. Very many improvements have been made in ETS4 compared to ETS3. Caution: limited to no more than 20 products (sufficient for educational needs) Support for all common 32-bit and 64-bit Windows operating systems Uses the latest Windows 2008 Server components for the ETS4 database Multi-monitor support (PC screens) Automatic software updates Import of KNX project/product data Switching between various KNX elements such as objects and group addresses plus search capability Separate tree and list searches Integrated KNX device parameter dialog in ETS4 interface. Single-click walk-through option for all parameter dialogs Separate administration of KNX bus interfaces for KNX monitors and ETS4 You can define your own dynamic views (e.g. devices with specific names or addresses) Group addresses may be structured as desired, even with more than three levels Uses complete 16-bit address space for group addresses Project wizard for rapid drafting of building structures Automatic software updates in background Online project diagnostics for analysing wiring errors Flexible KNX bus/group monitor with controllable display options plus new filters and trigger conditions Display of bus load Lucas Nülle GmbH Page 23/26
24 EIT 8.3 Smart homes using existing bus systems EIT 8.3 Smart homes using existing bus systems This set requires a minimum installation of KNX, DALI and EnOcean components. These components can also be found in the sets EIT8 - KNX or EIT3 Energy-efficient lighting using DALI/EnOcean. Parameters for the smart home interface are set via ETS and i-bus. Lucas Nülle GmbH Page 24/26
25 Supplement to basic set, consisting of: Supplement to basic set, consisting of: Pos. Product name Bestell-Nr. Anz. 34 Interface board for setting up a smart home system CO3209-9Z 1 The interface board supplements existing bus systems. It acts as a central communications facility for various bus systems. It can be used to exchange data between KNX, DALI and EnOcean buses. At the same time, it also offers access for setting KNX parameters via Ethernet. Functions: Fault notifications and visualisation capabilities for entire lighting installations 14 Lighting scenarios which can be controlled and saved via KNX Power-on level subject to modifiable parameters: It is possible to program the brightness levels with which lights should activate once operating power is restored to their ballast units Sequential control: Up to 10 scenarios can be configured in sequence, which can repeat from 1 to 254 times or be repeated indefinitely Correction of characteristics: The DALI characteristic can be made linear and KNX control signals can be set to trigger at higher levels. Switching, dimming, setting of brightness levels Stairway lighting function Slave function for integration into constant lighting level control systems Seasoning function: e.g. for dimmable fluorescent lamps Technical data: Operating voltage: V AC, 50/60 Hz, V DC Supply voltage for IP gateway: Vs V DC via internal plug terminal Test button for testing DALI outputs Red LED and KNX button for assigning physical addresses Green LED indicating operational readiness Yellow LED for indicating DALI faults, constant lighting function Test-mode indicator, slow flashing Initialisation indicator, fast flashing LED indicator (internal) 1 x KNX programming indicator LCD display (internal) 2x8 characters Positive STN (LCD) display (yellow and green) KNX programming button 2 Buttons for control of LCD Button for deleting EnOcean appliances Teach-in/Learn button for EnOcean appliances Inputs and outputs: 2-mm/4-mm safety sockets Dimensions: 297 x 224 x 80 mm Weight: 1.8 kg Lucas Nülle GmbH Page 25/26
26 Software: Pos. Product name Bestell-Nr. Anz. 35 ETS 5 Lite software for KNX / EIB (single licence) + dongle (D,GB,F,E) SO4001-4L 1 ETS4 is the latest ETS generation, directly following on from the ETS3 release. Very many improvements have been made in ETS4 compared to ETS3. Caution: limited to no more than 20 products (sufficient for educational needs) Support for all common 32-bit and 64-bit Windows operating systems Uses the latest Windows 2008 Server components for the ETS4 database Multi-monitor support (PC screens) Automatic software updates Import of KNX project/product data Switching between various KNX elements such as objects and group addresses plus search capability Separate tree and list searches Integrated KNX device parameter dialog in ETS4 interface. Single-click walk-through option for all parameter dialogs Separate administration of KNX bus interfaces for KNX monitors and ETS4 You can define your own dynamic views (e.g. devices with specific names or addresses) Group addresses may be structured as desired, even with more than three levels Uses complete 16-bit address space for group addresses Project wizard for rapid drafting of building structures Automatic software updates in background Online project diagnostics for analysing wiring errors Flexible KNX bus/group monitor with controllable display options plus new filters and trigger conditions Display of bus load Lucas Nülle GmbH Page 26/26
Table of Contents. Lucas Nülle GmbH Page 1/29
Table of Contents Table of Contents Building management systems Building management systems EIT 8 Wiring installation using Instabus KNX EIT 8.1 Lighting and blind/shutter control using KNX/EIB EIT 8.2
More informationTable of Contents. Lucas Nülle GmbH Page 1/17
Table of Contents Table of Contents Building management systems Building management systems EIT 10 Smart Homes EIT 10 Smart homes using Z-Wave / ZigBee 1 2 2 4 5 Lucas Nülle GmbH Page 1/17 www.lucas-nuelle.us
More informationTable of Contents. 1 Automation Technology. 2 Automation technology. 2 Automation technology with Siemens PLC
Table of Contents Table of Contents 1 Automation Technology 2 Automation technology 2 Automation technology with Siemens PLC 3 CLC 30 Fundamentals of programmable logic controls using the SIMATIC S7-300
More informationTable of Contents. Lucas Nülle GmbH Page 1/17
Table of Contents Table of Contents Power Electronics / Electrical Machines / Drive Technology EPE Power electronics and drives 300W Drives EPE 43-3 Converter drives with DC motor 300W 1 2 2 3 4 Lucas
More informationTable of Contents. 1 Power Electronics / Electrical Machines / Drive Technology. 2 EEM Electrical machines 1kW. 2 EEM 4-1 Asynchronous machines 1kW
Table of Contents Table of Contents 1 Power Electronics / Electrical Machines / Drive Technology 2 EEM Electrical machines 1kW 2 EEM 4-1 Asynchronous machines 1kW 3 EEM 4.2-1 Three-phase induction motor
More informationTable of Contents. Lucas Nülle GmbH Page 1/44
Table of Contents Table of Contents Power Electronics / Electrical Machines / Drive Technology EEM Electrical machines 300W EEM 11-3 Energy-saving drives 300W EEM 11.1-3 Energy efficient drive design 300W
More informationTable of Contents. Table of Contents Building management systems InsTrain wiring installation training system EGT 4 KNX/EIB bus systems
Table of Contents Table of Contents Building management systems InsTrain wiring installation training system EGT 4 KNX/EIB bus systems 1 2 2 5 Lucas Nülle GmbH Page 1/16 www.lucas-nuelle.com Building management
More informationTable of Contents. Lucas Nülle GmbH Page 1/19
Table of Contents Table of Contents Electrical Power Engineering, Smart Grid Trainers Power transmission ELP Protective systems for high-voltage transmission lines ELP 3 Overvoltage and undervoltage protection
More informationTable of Contents. Lucas Nülle GmbH Page 1/118
Table of Contents Table of Contents Electrical Power Engineering, Smart Grid Trainers Power transmission EUL High-voltage transmission lines EUL 1 Investigations on Three-phase Transmission Lines EUL 2
More informationTable of Contents. 1 Electrical Power Engineering, Smart Grid Trainers. 2 Renewable Energies. 2 EPH 3 Professional Photovoltaics Trainer (PV)
Table of Contents Table of Contents 1 Electrical Power Engineering, Smart Grid Trainers 2 Renewable Energies 2 EPH 3 Professional Photovoltaics Trainer (PV) 3 EPH 3.1 Investigation of solar modules 4 EPH
More informationTable of Contents. 1 Power Electronics / Electrical Machines / Drive Technology. 2 Designing drive controllers with MATLAB - Simulink 1kW
Table of Contents Table of Contents Power Electronics / Electrical Machines / Drive Technology 2 Designing drive controllers with MATLAB - Simulink kw 2 EPE 53- DC drives with cascade control using MATLAB
More informationInForm Superstructures
Advantages InForm racks are fitted between the vertical profiles and thus ensure a generous amount of open working table surface. Devices are installed directly in the 3HU and 6HU racks, additional devices
More informationInForm Superstructures
Advantages InForm racks are fitted between the vertical profiles and thus ensure a generous amount of open working table surface. Devices are installed directly in the 3HU and 6HU racks, additional devices
More informationTable of Contents. Table of Contents Microcomputers Microcontroller Technology using the 32-Bit ARM Cortex M3
Table of Contents Table of Contents Microcomputers Microcontroller Technology using the 32-Bit ARM Cortex M3 1 2 2 Lucas Nülle GmbH Page 1/9 www.lucas-nuelle.com Microcomputers Training systems on microcontroller
More informationProduct and Function Description
Product and Function Description and the LED display. The touchscreen can be used to select from up to 6 languages for the display of texts and messages. The room temperature controller integrated in Contouch
More informationTable of Contents. Lucas Nülle GmbH Page 1/36
Table of Contents Table of Contents Automation Technology Automation technology Automation technology with Siemens PLC Operating and Monitoring CBS 1 Industrial bus systems CID 1 - RFID CLP 20 Open-loop
More informationTable of Contents. Lucas Nülle GmbH Page 1/9
Table of Contents Table of Contents Automation / Industry 4.0 IMS Industrial mechatronics system Mechatronics Sub-Systems with UniTrain IMS 10 Buffering 1 2 2 4 5 Lucas Nülle GmbH Page 1/9 www.lucas-nuelle.us
More informationAccessories for control enclosures. BERNSTEIN attachment solutions. Double coupling head (console version with suspension system attachment)
25 Accessories for control enclosures BERNSTEIN attachment Single coupling head (suspended console version) Double coupling head (console version with suspension system attachment) 322.5 231 232 140 The
More informationBuilding Energy Management Training Systems
Building Energy Management Training Systems 3466-00 LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 03/2019 Table of Contents General Description 2 Courseware 2 Topic Coverage 2 List of Available
More informationSybaLab. The Laboratory Equipment Range from Lucas-Nülle
SybaLab The Laboratory Equipment Range from Contents Laboratory Systems for Education and Training, Changing with the Times... 4 We Represent Quality Certification to ISO 9001:2000... 5 Educational Concepts
More informationLighting control for commercial buildings
[ INTELLIGENT SOLUTIONS ] Products and systems Lighting control for commercial buildings For management of different functions in a simultaneous and integrated way, via a BUS line Cost saving thanks to
More informationEcoTec SP tables and base cabinets
Shapes and colours Tabletops and furniture surfaces Table superstructures, base cabinets and handles 30 mm panel with replaceable edge, Antistatic, light grey 30 mm panel with impact-resistant edge band
More informationProduct and function description
GAMMA instabus The following display and operating functions can be configured: switching, switching with forced control, dimming, sun protection control, recall and save scenes, sending and displaying
More informationTable of Contents. Lucas Nülle GmbH Page 1/252
Table of Contents Table of Contents Electrical Power Engineering, Smart Grid Trainers Basics of electrical power engineering Fundamentals of power engineering (UniTrain) EUB Current and voltage transformers
More informationTable of Contents. Lucas Nülle GmbH Page 1/55
Table of Contents Table of Contents Electrical Power Engineering, Smart Grid Trainers Basics of electrical power engineering Fundamentals of power engineering (UniTrain) EUB Current and voltage transformers
More information1 Safety instructions. 2 Device components. 3 Function. Smart Control IP. Art. No. SC 1000 IP. Operating instructions
Smart Control IP Art. No. SC 1000 IP Operating instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Serious injuries, fire or property
More informationVENTILATION BUTTONS 24 V DC
VENTILATION BUTTONS 24 V DC Ventilation button (with foil push buttons and displys) Application: Ventilation button for connection to the ventilation inputs of SHEV or natural ventilation control units.
More informationBuilding Control GAMMA instabus
The worldwide standard for home and building control Building Control GAMMA instabus siemens.com/gamma The comprehensive GAMMA instabus product portfolio comprises intelligent devices and is your key to
More informationAS-Interface I/O Module
AS-Interface I/O Module Construction The AS-Interface I/O module is designed as a compact, robust field module. It is composed of an electronic module (top) and a coupler module (base). Connectors (standard
More informationAir Quality Sensor KNX AQS
EN Air Quality Sensor KNX AQS Technical Specifications and Installation Instructions Elsner Elektronik GmbH Control and Automation Engineering Herdweg 7 D 75391 Gechingen Phone +49 (0) 70 56 / 93 97-0
More informationProduct and functional description. Application Program. instabus EIB Technical product information. April (6 x AC 230 V / 0,05 A)
Product and functional description also functions if the bus cable is not connected or if the bus communication fails. After a long push button action (> 2 s), the other valve group is selected. The yellow
More informationSupplementary operating instructions for your air curtain system Controller TMC 500
Supplementary operating instructions for your air curtain system Controller TMC 500 (Translation of the original) Serial number: Year: Please quote this number when contacting customer service! Date 08.04.2016
More informationIndicator, round, raised, full face with plastic matt chrome bezel, 22.5 mm mounting, lamp block included. Yellow Green
22.5 mm 3.5 mm IP65 1 A 66 VAC Choose one component from each of the coloured sections to assemble a complete switch. For other options or further information please contact your local sales office. INDICATOR
More informationIT power distribution Power distribution units (PDU) Basic. Versions available:
IT PDU Basic 1 U With its IT PDU Basic 1 U, BACHMANN provides a huge choice of PDUs in a high-quality aluminium profile. With their extremely compact size of just 1 height unit, mm in depth and 1" in width,
More informationProduct documentation
Product documentation Universal push-button module with integrated BCU, 1-gang Universal push-button module with integrated BCU, 2-gang Universal push-button module with integrated BCU, 3-gang Universal
More information1-channel shutter actuator 6A UP Installation Instructions
2-channel switching actuator 6A UP 1-chan. universal dimming actuator 210 W 1-channel switching actuator 16A UP Order no.: 1047 00 Order no.: 1057 00 Order no.: 1058 00 Order no.: 1059 00 System rmation
More informationProduct and functional description
Product and functional description The RS 525/23 Universal Dimmer is a KNX device with one dimmer output. The device is installed in an AP 118 Control Module Box or an AP 641 Room Control Box. The bus
More informationPlexo IP 55/IP 66. Makes your day, rain or shine PLEXO / WEATHERPROOF PRODUCT GUIDE. For reference only.
Plexo IP 55/IP 66 Makes your day, rain or shine PLEXO / WEATHERPROOF PRODUCT GUIDE www.legrand.com.sg Plexo IP 55 Ingenious features for easy installation >> Time saving guaranteed: no cut-out Uncut pierceable
More informationProduct and Applications Description. Example of Operation. Installation Instructions WARNING. Note. Application Programs
Product and Applications Description Example of Operation dimmer UP 525/11 load circuit AC 230 V L1 N The dimmer UP 525/11 is a dimming actuator for mounting in box mounts (a.o. 60 mm Ø, 60 mm depth).
More informationCooled incubators (ST), laboratory refrigerators
Cooled incubators (ST), laboratory refrigerators The version has been designed for those customers who look for professional lab equipment at a very competitive price. The cooled incubators (ST) and refrigerators
More informationTable of Contents. Table of Contents Communications Technology Professional practice Professional practice WLAN TWT 1 WLAN trainer SOHO
Table of Contents Table of Contents Communications Technology Professional practice Professional practice WLAN TWT 1 WLAN trainer SOHO 1 2 2 3 3 Lucas Nülle GmbH Page 1/7 www.lucas-nuelle.com Communications
More informationPush-buttons 18. Light scenes push-buttons 21. Push-buttons with thermostat 22. Labelling ields 24
A wide array of alternative materials and colours have been added to the convenient variety of KNX functionality of the. Frameless KNX push-button with full-material rockers (glass, stainless steel and
More informationXL 4000 metal free-standing enclosures and cable compartments
87045 LIMOGES Cedex Telephone : 05 55 06 87 87 Fax : 05 55 06 88 88 XL metal free-standing enclosures and CONTENTS PAGE 1. General characteristics...1 2. Range...2 3. Overall dimensions...2 4. Equipment...3
More informationProduct and Applications Description. Application Programs. Note. instabus EIB Technical Product Information. June 2005
Product and Applications Description Application Programs The application programs of the dimmer UP 525/01 consist of two elements: the actuating and the sensor program element. The tasks actuating program
More informationProduct and functional description
Product and functional description The UP 525/13 Universal Dimmer is a KNX device with one dimmer output. The device is installed in a flushmount wall box (60 mm Ø, depth 60 mm) or an installation box.
More informationProduct and functional description
Product and functional description The instabus / DAI gateway 141 is a KX EIB device with one DAI output to which up to 64 DAI actuators (e.g. DAI ballasts) can be connected to. It is not allowed to connect
More informationDisplay devices. Functional versatility with optimum ease of use
Display devices Functional versatility with optimum ease of use KNX Smart-Pilots Intuitive operation via resistive touch screen With the fanless SMART PILOT PC for wall mounting, you control all the building
More informationGlass sensors 35. Supplementary products 39
Understatement is an art, and the makes it perfect. Up to eight functions are concealed under a pure surface that is practically flush with the wall, and can be custom-labelled on request. A single touch
More informationBus coupler 3 Bus coupler 3 external sensor Order No
KNX Product documentation Issue: 28.07.2017 20083200 Bus coupler 3 Bus coupler 3 external sensor Table of Contents KNX Product documentation 1 Product definition... 3 1.1 Product catalogue... 3 1.2 Function...
More informationElectrical cabinets for server and LAN. 42 Lafer
Lafer@ck Electrical cabinets for server and LAN 42 Lafer Lafer@ck Lafer. Around you Lafer@ck Lafer 43 Lafer@ck Electrical cabinets for server and LAN They are designed for all information systems and data
More informationEY-EM : Remote I/O module, ecolink
EY-EM 510...512: Remote I/O module, ecolink510...512 How energy efficiency is improved Optimum adjustment to applications by means of module technology. Reduction in wiring Features Part of the SAUTER
More informationKNX T-UP. Temperature Sensor. Technical specifications and installation instructions
EN KNX T-UP Temperature Sensor Technical specifications and installation instructions Elsner Elektronik GmbH Control and Automation Engineering Herdweg 7 D 75391 Gechingen Phone +49 (0) 70 56 / 93 97-0
More informationGeneral catalogue Export SMOUTS ARCHITECTEN
General catalogue 2011-2012 Export SMOUTS ARCHITECTEN 01 NIKO HOME CONTROL INTERIEUR DEWAIDE Project management Configuratie Installatie Help Niko Home Control (available from 1 August 2011) Live it, love
More informationSYSTEM WORLD PRODUCT INFO
SYSTEM WORLD PRODUCT INFO August 208 System case.. System Case Configuration.. Width x depth x height (inches).56 x 0.62 x 3.3 inches Number of System Boxes Material Lid Type Art. No. Empty* ABS Black
More informationBST BuildingSystemsTrainer
_SMARThome _SMARThome Three-Phase Network Analyzer Board Smart Metering Photovoltaic modul Counter Smart Meter 01 05 Wind power Counter 01 Solar array Backup system Photovoltaic On Grid DC Feeding SCADA
More informationPlexo IP 55/IP 66 Makes your day, rain or shine
Plexo IP 55/IP 66 Makes your day, rain or shine PLEXO / WEATHERPROOF WIRING DEVICES www.legrand.com.sg Plexo IP 55 Ingenious features for easy installation >> Time saving guaranteed: no cut-out Uncut pierceable
More informationPC100 - Concept. Advantages in comparison
PC100 - Concept The future of HMI-devices for the use in explosion endangered areas is less based on short lived proprietary products but more on all-purpose, modular products of latest technology and
More informationElectrical devices may only be mounted and connected by electrically skilled persons.
DALI gateway TW Art. No. : 2099REGHE Operating instructions 1 Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons. Serious injuries, fire or property
More informationPower supply 142. Couplers 143. Data interfaces 144. Accessories 145
KNX system units The system components are KNX devices, which assume higher-level functions, independent of the application. They guarantee the necessary infrastructure in the building, ensuring a flawless
More informationDisplay Enclosures For Visualized Information & Communication
Display Enclosures For Visualized Information & Communication... the perfect shell for valuable electronics. 30 Display enclosure Display enclosure - communicating and visualizing information Visualizing
More informationHCS Newsletter No. 43, Dated Thursday, 04 December, 2003 HCS DataLine Cabinets and Enclosures
HCS - Made in Turkey With Pride! HCS Newsletter No. 43, Dated Thursday, 04 December, 2003 HCS DataLine Cabinets and Enclosures HCS, the only Turkish manufacturer of state-of-the-art LAN cabling systems
More informationSwitches and Indicators 84
Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories
More informationProduct and functional description
Product and functional description The RS 520/23 shutter / blind actuator is a KNX device with one relay output. The device is installed in an AP 118 Control Module Box or an AP 641 Room Control Box. The
More information1 Safety instructions. 2 Device components. 3 Function. IC00P01DAL - DALI gateway. DALI gateway. Operating instructions
DALI gateway Operating instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Serious injuries, fire or property damage possible. Please
More informationABB i-bus EIB / KNX Shutter Actuator with Manual Operation, 4-fold, SMI, MDRC JA/S 4.SMI.1M. Product Manual. Intelligent Installation Systems ABB
Product Manual ABB i-bus EIB / KNX Shutter Actuator with Manual Operation, 4-fold, SMI, MDRC JA/S 4.SMI.1M Intelligent Installation Systems ABB JA/S 4.SMI.1M Shutter Actuator with Manual Operation, 4-fold,
More informationStructure of the device. Push-button sensor module. Ref.-no.: 4008 TSM Safety instructions
Push-button sensor module Ref.-no.: 4008 TSM Safety instructions Caution! Electrical devices may only be installed and fitted by electrically skilled persons. Non-compliance with the installation information
More informationProduct documentation
Product documentation Standard push-button module with BCU, 2-gang ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 D-58579 Schalksmühle Telefon: +49.23 55.8 06-0 Telefax: +49.23 55.8 06-1 89 E-mail: mail.info@jung.de
More informationProduct documentation
Product documentation Standard push-button module with BCU, 4-gang ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 D-58579 Schalksmühle Telefon: +49.23 55.8 06-0 Telefax: +49.23 55.8 06-1 89 E-mail: mail.info@jung.de
More informationEmergency Luminaire for Fluorescent Lamps Series EXLUX 6009
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or
More informationDELTA profil wall switch, single UP 241/2 5WG AB_2
UP 241/2 5WG1 241-2AB_2 UP 241/3,with status LED 5WG1 241-2AB_3 UP 243/2 5WG1 243-2AB_2 UP 243/3,with status LED 5WG1 243-2AB_3 UP 245/2 5WG1 245-2AB_2 UP 245/3,with status LED 5WG1 245-2AB_3 UP 245/4,with
More informationSoftware Installation Guide. Version 1.1
Software Installation Guide Version 1.1 Thank you for choosing an Airtopia product You are advised to read this manual carefully; it contains all the information you need about the right conditions for
More informationProduct and functional description
Product and functional description Connection example The universal dimmer main module N 528/31 is an installation device for DIN-rail mounting, with N-system dimensions. It is designed for lighting control,
More informationSpecification Sheet: HT SERIES
Specification Sheet: HT SERIES HT Series: High Specification 19 Enclosures Hi-tech Series of 19 enclosures, supplied in self assembly (flat pack) format for ease of transportation and storage. Manufactured
More informationSafety mats. sensing the future. Electrical surface switches for safe activation and deactivation of machines, devices and automatic doors
sensing the future Electrical surface switches for safe activation and deactivation of machines, devices and automatic doors Reliable, robust, low-maintenance System is simple to install Surface switch
More informationTechnical Datasheet clima RCM-CC
Technical Datasheet 1. Product description The is a room control panel with an integrated temperature sensor for measuring the room temperature. The device is featured with a turn wheel to adjust the set
More informationTROXNETCOM AS-i. Modules. Communication interface between a component and the controller. 06/2015 DE/en K
.2 X X testregistrierung TROXNETCOM AS-i Communication interface between a component and the controller The module is used to connect the control system with the components Integral AS-Interface slave
More informationQMX3.P30 QMX3.P70 QMX3.P02 QMX3.P34 QMX3.P74 QMX3.P37. Wall-mounted sensors and room operator units for KNX PL-Link, KNX S-mode and KNX LTE-Mode
s 1 602 QMX3.P37 QMX3.P34 / P74 QMX3.P02 QMX3.P70 QMX3.P30 Desigo TRA Wall-mounted sensors and room operator units for KNX PL-Link, KNX S-mode and KNX LTE-Mode QMX3.P30 QMX3.P70 QMX3.P02 QMX3.P34 QMX3.P74
More informationThe output variables can be force-controlled from a coordinating control system.
Produktname: 4-channel analog actuator Bauform: rail-mounted device Artikel-Nr.: 1022 00 ETS-Suchpfad: Gira Giersiepen / Output / Analog output 4fach / Analog actuator 4fach Scope of application: The analog
More informationColour Touch Panel 3.5
Guangzhou Video-star Electronics Industrial Co., Ltd K-BUS R Colour Touch Panel 3.5 User manual-ver. 1.2 CHTF-35/01.1 CHTF-35/01.2.21 CHTF-35/01.2.22 CHTF-35/01.2.24 KNX/EIB Intelligent Installation Systems
More informationMillenium II +: general characteristics
Millenium II +: general characteristics Starter kit Blind Temperature sensors Special starter kits Bare board Power supply Level detection Local extensions Accessories Standard Expandable Adjacent extensions
More informationDigital electropneumatic positioner
Digital electropneumatic positioner Type 879 can be combined with Compact metal housing Graphic display with backlight Easy start-up Comprehensive range of additional software functions Profibus DPV1 (optional)
More informationINTRODUCTION Busch-SmartTouch KNX. The 7 SmartTouch
INTRODUCTION The 7 SmartTouch Motivation and objectives - your smart display for the smart buildings of today. A smart display with many integrated applications for smart buildings, like KNX controls and
More informationABB i-bus KNX DALI Light Controller, 8-fold, MDRC DLR/S M, 2CDG110101R0011
Technical data 2CDC507101D0202 ABB i-bus KNX Product description The ABB i-bus KNX DALI Light Controller DLR/S 8.16.1M is a KNX modular installation device (MDRC) in ProM design for installation in the
More informationKNX DALI Gateway Plus - User Manual
KNX DALI Gateway Plus - User Manual Item No.: LC-013-064 1. Product Description The KNX DALI gateway Plus is the interface between the KNX installation and the DALI lighting system. It allows up to 64
More informationDELTA i-system wall switch single UP 221/2 5WG AB_2
DELTA i-system wall switch single UP 221/2 5WG1 221-2AB_2 UP 221/3,with status LED 5WG1 221-2AB_3 wall switch double UP 222/2, 5WG1 222-2AB_2 UP 222/3,with status LED 5WG1 222-2AB_3 wall switch triple
More informationCOMPACT LED DRIVERS. PrimeLine DALI dimmable & Selectable Current (Dip Switch) PrimeLine DALI DIMMABLE & SELECTABLE CURRENT (DIP SWITCH)
COMPACT LED DRIVERS PrimeLine DALI DIMMABLE & SELECTABLE CURRENT (DIP SWITCH) 186762, 186763 Typical Applications Built-in in compact luminaires Shop lighting Downlights PrimeLine DALI dimmable & Selectable
More informationWINSTA. Full Line Catalog 2008/2009
WINSTA Full Line Catalog 2008/2009 5 Contents FULL LINE CATALOG W4, Volume 1 Rail-Mounted Terminal Block Systems FULL LINE CATALOG W4 Rail-Mounted Terminal Blocks Volume 1 X-COM -SYSTEM Terminal Strips
More informationHERZ Actuator 7708, 7990
HERZ Actuator 7708, 7990 Data sheet for 7708, 7990 Issue 1116 Dimensions Dimensions Installation height Dimensions Installation height Dimensions Installation height Page 1 Models HERZ Actuator 2-point,
More informationECO 60 RANGE INTERNATIONAL DOMESTIC RANGE
INTERNATIONAL DOMESTIC RANGE CONTROL DEVICES COMMAND - WHITE CIRCUIT BREAKERS- 250V~ Code Description Type Symbol Pack GW 34 001 1P - 10AX General - 25/100 GW 34 002 1P - 10AX illuminable Functional indicator
More informationDALI Installations Application AEL-DALI
DALI Installations Application AEL-DALI Engineering and Technical Teaching Equipment INTRODUCTION The advent of digital dimming offers a new option with clear advantages over traditional analog dimming.
More informationgesis FLEX Decentralized room automation Modular Compact Pluggable Room for the future.
gesis FLEX gesis FLEX Decentralized room automation Modular Compact Pluggable Room for the future. 2 gesis FLEX Room automation of the future Decentralized room automation with gesis FLEX In terms of flexibility,
More informationLinear Luminaire with LED Series 6012/5
> For use in Zones 1 & 2, 21 & 22 > Latest LED technology with a high luminous efficacy and a long service life > Extra flat version for low mounting depth > Powder-coated sheet-steel or brushed stainless
More informationElabo TaMo. Mobile carrier system for industrial use
Elabo TaMo Mobile carrier system for industrial use Elabo TaMo Modular carrier system M-Frame TaMo is conceived modularly. The M-frame basic carrier consists of the pivoting casters, the bottom plate which
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet LR24A-MOD Communicative rotary actuator for ball valves orque motor 5 Nm Nominal voltage AC/DC 24 V Control modulating,, hybrid mode Conversion of sensor signals Communication via BACnet
More informationLimanda. Technical data
Polyamide hand held enclosures for data acquisition, MCR and automation engineering 2 sizes - 270 x 248 x 64 mm to 311 x 281 x 72 mm Large fitting area For installations and command devices mobile and
More informationSwitch cabinet housings. Distribution housings. Appropriate housings for each application. Our experience. Your safety.
Switch cabinet housings Distribution housings Appropriate housings for each application Our experience. Your safety. Overview of the housing ranges Mounting rail bus system In-Rail Bus...6 Switch cabinet
More informationMureva Assembly surface mounted wiring devices
Assembly surface Switches P124543 P124547 External dimensions : 72 x 72 x 47 mm.. Assembly surface rockers become illuminated using bulbs and indicators in option. They can carry a label using the legended
More informationOperating and mounting instructions
General Usage IPAS DALI Gateways bring together the crossfunctional KNX installation bus and the lighting control specific DALI-Bus (IEC 60929). Lights with cost-effective, digital DALI ECGs can therefore
More information5. Office furniture. 5. Office furniture. Laboratory furniture. Flexible and customised
5. Office Flexible and customised 5. Office Laboratory Your laboratory staff needs a thoughtfully planned office or work area and we have just the you have been looking for. Functional and customised to
More informationDP2 DOOR PHONE. For Technical Assistance Please Phone: (07)
DP2 DOOR PHONE For Technical Assistance Please Phone: (07) 5596 5128 TABLE OF CONTENTS Description Page 3 Door Phone Dimensions Page 4 Door Phone Range Page 5 Door Phone Performance Page 6 Operation Summary
More information