Table of Contents. 1 Automation Technology. 2 Automation technology. 2 Automation technology with Siemens PLC

Transcription

1 Table of Contents Table of Contents 1 Automation Technology 2 Automation technology 2 Automation technology with Siemens PLC 3 CLC 30 Fundamentals of programmable logic controls using the SIMATIC S Lucas Nülle GmbH Page 1/9

2 Automation Technology Acquire practical and project-oriented laboratory skills and expertise: Automation trainers, mechatronics trainers, PLC trainers Automation technology Automation technology Due to the growing importance of process automation the area of automation technology is taking on an ever greater role in industrial operations. This applies both for standard operations in production as well as for vocational training. Today automation technology almost always involves drive technology, closed-loop control and computer engineering. Due to the rapid developments in microcontroller and computer technology, automation has become one of the most innovative and breathtaking of all the areas of electrical engineering and electronics. Add to that the fact that novel industrial solutions like decentralisation and visualisation require new vocational training systems. Furthermore, the hitherto sheer multitude of manufacturer-dependent software products has been replaced by the international standard IEC Contemporary programmable logic controls will now be programmed in accordance with standardised rules. All of these demands mean that there is a need to have the automation technician of today trained on practice-oriented training systems which convey to the student both the latest technology but also endow him or her with the required skills and competency. Lucas Nülle GmbH Page 2/9

3 Automation technology with Siemens PLC Automation technology with Siemens PLC CLC 30 Fundamentals of programmable logic controls using the SIMATIC S7-300 CLC 30 Fundamentals of programmable logic controls using the SIMATIC S7-300 Work with STEP 7 programming software Hardware configuration and planning Data types Creating statement lists Programming languages STL, LAD and SFC Programming of binary operations and word operations Programming of counters and time markers, comparison and arithmetic functions Program structure, invoking subroutings Putting into operation and testing Diagnostic functions Basic equipment set, consisting of: Lucas Nülle GmbH Page 3/9

4 Basic equipment set, consisting of: Pos. Product name Bestell-Nr. Anz. 1 SIMATIC S7-314C-2 PN/DP 24 DI, 16 DO, 4 AI, 2 AO, 24V / 6 A power supply CO3713-8L 1 Modular training system for PLC devices of the SIMATIC S7-300 series. The freely accessible profile rail can be equipped with various input and output modules of the SIMATIC S7-300 series. The system bus integrated in the training system allows straightforward connection of the modules. SIMATIC S7-300 with CPU 314C-2 PN/DP Stable desktop console with non-slip feet Integrated power supply: 24V/6A DC Sockets for EMERGENCY-OFF loop (voltage isolation of output components) Main memory: 192 KByte Loading memory: micro memory card 512 KByte Programming language: STEP 7 Processing times: 0.1µs for bit operation, 0.5µs for word operation 256 counters 256 time markers MPI / Integrated PROFIBUS-DP master/slave interface 2 Ethernet / ProfiNet interfaces Integrated inputs/output 24 digital inputs DC 24V on 4mm safety sockets 24 latched, pushbutton switches for the simulation of digital inputs 4 analog inputs 0-10V on 4mm safety sockets 1 potentiometer to simulate analog inputs 16 digital outputs DC 24V on 4mm safety sockets 2 analog output 0-10V on 4mm safety sockets Real-time clock Operating voltage: 230V AC Dimensions (HxWxD): 297 x 456 x 125mm Weight: 7kg Important note: Lucas Nülle GmbH Page 4/9

5 This item can only be ordered upon submission of a supplementary license agreement covering schools as well as public and commercial training centers. 2 PLC-S7 PC-adapter with USB/MPI converter SO3713-5E 1 For coupling a PC to a SIMATIC S7-300 via USB port Including MPI and USB cables Lucas Nülle GmbH Page 5/9

6 Software: Pos. Product name Bestell-Nr. Anz. 3 Software for training systems 1x STEP 7, S7-Graph, S7-SCL, PLC- Sim(D,GB,F,E,I) SO6002-1Q 1 The software consists of the following program elements: 1 x STEP 7 Professional V14 (TIA-Portal) 1 x STEP 7 Professional 2010 v5.5 For designing projects with SIMATIC S7-1500/1200/300/400/WINAC and SIMATIC Basic panels. 1 x S7-SCL (Structured Control Language); pascal-type high-level language, optimised for the programming of programmable logic controls 1 x S7-GRAPH; efficient tool for the description of sequential processes (process chains) including a methodical procedure and display offering a clear overview. 1 x S7-PLCSIM; simulation software for testing user programs created on a PC, independent of the availability of targeted hardware. 1 x S7 Distributed Safety v5.4 Warning: Suitable for schools and commercial training centres. System prerequisites: Personal computer with Windows Server 2003/Windows 7 operating system (32 Bit Ultimate, Professional and Enterprise) CD-ROM disk drive for software installation USB port for programmer interface Minimum 650 MB free hard disk memory Minimum 1GB RAM main memory Processor with min. 600 MHz for Windows XP, 2.4 GHz for Windows Server 2003 and 1 GHz for Windows 7 Lucas Nülle GmbH Page 6/9

7 Media: Pos. Product name Bestell-Nr. Anz. 4 QuickChart, Siemens PLC S7 board, safety instructions (GB) SO6200-5A 1 Short documentation covering the putting into operation of complex equipment and experiment set-ups. Terminal assignment, safety instructions, help Circuit and assembly diagrams Color print in DIN A3 format Laminated: 2 x 250 µm 5 QuickChart, Siemens PLC S7 board, assembly and start-up (GB) SO6200-5B 1 Short documentation covering the putting into operation of complex equipment and experiment set-ups. Terminal assignment, safety instructions, help Circuit and assembly diagrams Color print in DIN A3 format Laminated: 2 x 250 µm 6 CLC30, PLC fundamentals, SIMATIC documentation on DVD (D,GB,F,E) SO5155-1N 1 Documentation package SIMATIC MANUAL COLLECTION on DVD, all manuals for S7-200/300/400, C7, LOGO!, SIMATIC DP, PC, PG, STEP7, ENGINEERING SW, RUNTIME SW, PCS7, SIMATIC HMI, SIMATIC NET, SIMATIC MACHINE VISION, SIMATIC SENSORS Lucas Nülle GmbH Page 7/9

8 Accessories: Pos. Product name Bestell-Nr. Anz. 7 Mobile aluminium experiment stand, 3 levels, power strip with 6 sockets, 1250x700x1995mm ST7200-3A 1 High-quality, mobile experiments stand from the SybaPro range for demonstrations and experiments. Features aluminium profile legs compatible with all add-ons and extensions for the SybaPro system. The mobile experiment stand is supplied in kit form and needs to be assembled by customers themselves. Table top: Frame: Dimensions: 30-mm table top made of highly compressed, multi-layer fine chipboard conforming to DIN EN Colour grey, RAL 7035, with 0.8-mm slightly textured laminate coating (Resopal) on both sides, conforming to DIN Resistant to many chemicals and reagents including dilute acids and alkalis Resistant to heat, e.g. molten solder or heating at specific points such as by soldering tips or cigarette ends Table top with solid impact-resistant protective edging made of 3mm thick RAL 7047 coloured plastic Coating and adhesive are PVC free Power strip with 6 outlet sockets mounted underneath the table top, lead and earthed plug 2 extruded aluminium profiles with multiple grooves 1800 x 120 x 40 mm (WxHxD) 8 equally sized grooves in extruded aluminium profiles (3 on each side and 1 each on the front and back) Grooves accommodate standard industrial mountings 4 H-shaped aluminium profiles, 1150 mm, for 3-layer organisation of DIN A4 panels Space for extension of power supply duct Base made of rectangular tubing with 4 swiveling double casters, 2 of which have brakes Table frame made of tough combination of rectangular tubing around the full perimeter Acid-resistant epoxy-resin coating, 80 µm thick (approx.), colour RAL 7047 Height of table top 760 mm 1250 x 1995 x 700 mm (WxHxD) Lucas Nülle GmbH Page 8/9

9 8 Protection cover for three-level experiment trolleys ST8010-9Y 1 Dust cover for three-level experiment trolleys For protecting equipment from dust and damp For keeping equipment out of sight (the cover must not be transparent, so is therefore opaque) Colour: matt dark grey with printed LN logo in orange) Material: nylon fabric with polyurethane coating High resistant to tearing, impregnated to be washable and waterproof Lucas Nülle GmbH Page 9/9