User's Manual. High-speed GB-IB Extender ZS-6103EF Series ZS-6103EF-F1 ZS-6103EF-F5. Zenisu Keisouku Inc.

Transcription

1 User's Manual High-speed GB-IB Extender ZS-6103EF Series ZS-6103EF-F1 ZS-6103EF-F5 Zenisu Keisouku Inc. Zip code: , Honmachi, Fuchu, Tokyo, Japan TEL / FAX

2 To Use This Product Safely Warning To Use This Product Safely Follow instructions Before power on: Be sure to operate the product with the specified power supply. Follow instructions Environmental condition: Operating temperature: 0 C to 40 C, Humidity: 10% to 90%. Use the product at the indoor place where no corrosive gas is present. Electrical Hazard Electrical Hazard Make sure that the product is grounded for safety. Be sure to use the green cable for grounding when you use the 2P-3P conversion adapter. Before replacing the fuse, be sure to turn off the power switch and disconnect the power cable from the switchboard and outlet. Use the specified fuse for fire prevention when replacing the fuse. Prohibited Handling precautions for the power cable Do not suspend the device in midair by grabbing the power cable that is connected to the device. Follow instructions Proper use of the device Do not remove the device cover. When there is a removal instruction of the device cover for dip switch settings in the User's Manual, be sure to turn off the power switch and disconnect the power cable from the switchboard and outlet. Do not use at locations subject to vibrations. No remodeling and decomposition Repairing If you find a malfunction, strange noise, or unusual smell; (1) Turn off power (2) Disconnect the AC adapter or cable from the power outlet (3) Do not remodel (decompose/repair). (4) Make a request for repair to your agent or the Sales Department of Zenis Keisoku, Inc. 2

3 Contents To Use This Product Safely 1 1 Outline 2 2 Specifications 2 3 Related Products 3 4 Preparation for Use 4 5 Operations 4 6 LED Display 4 7 Precautions for Use 5 8 Appearance 6

4 1 Outline ZS-6103EF is the unit to expand the GP-IB function. Using this unit, you can extend the GP-IB cable and connect more devices. Furthermore, this unit can be used as the measure against noise for the precision measuring instruments and can be used to exclude the interference wave like a thunder. One set of ZS-6103EF is made of two devices and the dedicated cable. Parallel GP-IP information is converted to serial information by ZS-6103EF and transmitted through the dedicated cable. We can provide ZS-6103EF of the following types in accordance with cable type; F1 (FC) Type: Quartz fiber optic cable use. Suitable for medium-speed and long distance transmission. F01 type optical connector use. F5 Type: Quartz fiber optic cable use. Suitable for high-speed and medium distance transmission. F05 type optical connector use. <Usage example in tandem connection> Optical fiber cable Optical fiber cable PC GP-IB device 2 Specifications 1 Specifications by type GP-IB device GP-IB device Model ZS-6103EF-F1 ZS-6103EF-F5 Abbreviated name F1 (FC) F5 Connector JIS F01 JIS F05 Cable GI 50/125 HPCF 200/230 Cable type (Inside panel) Cable type (Indoor use) Cable type (Outdoor use) Communication speed Transmission distance Power source Features ZS-F1NR-xxx ZS-F1ND-xxx ZS-F1ET-xxx MAX 125kB/s MAX 3km DC+5V 500mA or less Long distance communication ZS-F5NR-xxx ZS-F5ND-xxx ZS-F5ET-xxx MAX 250kB/s MAX 1km DC+5V 500mA or less Low prices (2) GP-IB standard: Compliant with IEEE STD. Supports all functions excluding the parallel port function. 2

5 (3) General Specification Power source: DC+5V 400mA or less (The range AC90V to 120V will be available with the optional AC adapter.) Size: 82mm(W) 30mm(H) 126mm(D) Accessories: DC cable or AC Adapter (Option) Weight: 500g or less Operating temperature: 0 C to 40 C 3 Related Products The connection cable between ZS-6103EFs is optional. Please order according to the usage environment. "xxx" part of the cable model represents the cable length in meters. "-10" represents 10m, "-1H" represent 100mm and "-1K" represents 1km. 1 For ZS6103EF-F1 (FC) ZS-F1NR-XX: F1 type, Inside panel ZS-F1ND-XX: F1 type, Indoor use ZS-F1ET-XX: F1 type, Outdoor use 2 For ZS-6103EF-F5 ZS-F5NR-XX: F5 type, Inside panel ZS-F5ND-XX: F5 type, Indoor use ZS-F5ET-XX: F5 type, Outdoor use Note 1 "Inside panel" is applicable for cabling inside the protected tube or inside the panel where pressure and tension are not applied to the cable. Note 2 "Indoor use" is applicable for cabling at indoor place where the method of suspending that applies tension to the cable is possible and it is not exposed to wind and rain. Note 3 "Outdoor use" is applicable for cabling at outdoor place where the method of suspending that applies tension to the cable is possible and it is exposed to wind and rain. 3

6 4 Preparation for Use Connection of cables and others are as follows; With identification marking (1) AC adapter DC5V 1A or more Center Plus Optical fiber cable Without identification marking (2) Example for F1 (FC) type and F5 type 1 Connect the optical fiber cable with each other. Make a cross-connection between "IN" and "OUT". The cable connected to "OUT" of one device should be connected to "IN" of the other device. 2 Connect the GP-IB cable. 3 Connect the power code to DC. 4 Confirm that POWER LED is lit on and other LEDs are not lit. 5 Operations This unit conducts Serial-Parallel (S/P) conversion and Parallel-Serial (P/S) conversion using CODEC, to ensure that cable can transmit the parallel signal type of GP-IB as bit serial. Error correction function for serial data transmission between cables is implemented to increase data transmission reliability. 6 LED Display POWER: Indicates that this product is ON and ready to operate. RD: This is lit when the data from the optical fiber is being received and sent it to GP-IB. SD: This is lit when the data from GP-IB is being received and sent it to the optical fiber. ERR: This is lit when transmission errors occur between cables. Be sure to examine, because many causes are considered that cables are not connected or cables are broken. 4

7 7 Precautions for Use 1 Your eyes may be harmed when you see directly the inside of the optical connector of ZS-6103EF. If you see directly it with the unaided eye, put a paper or others in front of the connector and check the reflected light. 2 Do not bend the optic fiber cable to a radius less than 60mm. Do not give a strong shock mechanically. 3 In case of the F1 (FC) model, fasten the inserted screws after checking the concave part of device's connector and the convex part of cable's connector. Fasten the screw to the end with force not too strong. 4 For the optical fiber connector of the F5 model, be sure to insert securely. In this case, do not grip the optical fiber cable during tightening. Be sure to insert the connector while holding the connector body part always. 5 Be sure not to apply vibration to the optical connector from the cable or others. Communication failure can be caused by shifting of optical axis. 6 When you want to use the optical fiber cable outdoor, be sure to specify the outdoor use always. 5

8 8 Appearance Top view Side view Front view Rear view Appearance General view ZS-6103EF ZS-6103EF-F1 (FC) Rear side ZS-6103EF-F5 Rear side 6