Ver.2.20 COM-2P(PCI)H COM-4P(PCI)H Features Cable & Connector (Option)

Transcription

1 RS-C ch Serial I/O Board with Isolation COM-P(PCI)H RS-C ch Serial I/O Board with Isolation COM-P(PCI)H This board is a PCI interface board for performing RS-C serial communications with external devices The < COM-P(PCI)H > has two RS-C serial ports per board The < COM-P(PCI)H > has four RS-C serial ports per board You can use the standard COM driver software (COM Setup Disk) supplied with the board to access the serial ports as standard Windows or Linux COM ports The specification, color, and design of a product may be changed without a preliminary announcement Features - The communication lines for each channel are electrically isolated from each other and from the PC - Maximum communication speed =,00bps - The baud rate can be set independently for each channel, by software - Each channel is equipped with separate -byte FIFO buffers for transmit and receive - A maximum of boards can be installed as configured in the range COM - COM - Driver software is supplied to allow the serial ports to be used as standard Windows or Linux COM ports - Surge protection is provided for each RS-C signal line - Uses the same easy-to-use -pin D-SUB connectors as a PC [COM-P(PCI)H] Cable & Connector (Option) RS-C Straight Cable with D-SUBP (m) RS-C Cross Cable with D-SUBP (m) RS-C Connection Conversion Straight Cable (M F, m) RS-C Connection Conversion Straight Cable (F M, m) RS-C Connection Conversion Cross Cable (F F, m) Connection Conversion Cable (M M x, 0mm) Connection Conversion Cable (M M x, 0mm) D-SUBP Male Connector Set ( Pieces) D-SUBP Female Connector Set ( Pieces) D-SUBP Male Connector Set ( Pieces) D-SUBP Female Connector Set ( Pieces) D-SUBP Male Connector Set ( Pieces) : RSC-F : RSS-F/M : RSC-F/F : PCE/PS : PCE/PS : CN-DM : CN-DF : CN-DM : CN-DF : CN-DM

2 specification Item Specification Number of channels ch Interface type RS-C Isolation Channel Isolation/Bus Isolation Isolation voltage Channel Isolation: 00VDC, Bus Isolation: 000VDC Transfer method Asynchronous serial transfer Baud rate -,00bps * * Data length,,, bits,, stop bits * Parity check Even, Odd, Non-parity * Controller chip 0 or equivalent (Each channel has -byte receive and -byte transmit FIFO buffers) Connecting distance m(typ) Interrupt requests level use * I/O address Any -byte boundary Power consumption VDC 00mA (Max) Operating 0-0 C, 0-0%RH(No condensation) temperature PCI bus specification bit, MHz, Universal key shapes supported * Dimension (mm) (L) x 0(H) Weight 0g * These items can be set by software For the "Driver Library API-PAC(W)" and the "Standard COM Driver Software COM Setup Disk" on the supplied CD-ROM, the range is -,00 bps * Data transmission at high speed may not be performed normally depending on the environment including the type of status of connected material of cable and environment * The interrupt signals from all channels are connected as a single interrupt signal on the PCI bus * This board requires power supply at + V from an expansion slot (it does not work on a machine with a +V power supply alone) Item Specification Number of channels ch Interface type RS-C Isolation Channel Isolation/Bus Isolation Isolation voltage Channel Isolation: 00VDC, Bus Isolation: 000VDC Transfer method Asynchronous serial transfer Baud rate -,00bps * * Data length,,, bits,, stop bits * Parity check Even, Odd, Non-parity * Controller chip 0 or equivalent (Each channel has -byte receive and -byte transmit FIFO buffers) Connecting distance m(typ) Interrupt requests level use * I/O address Any -byte boundary Power consumption VDC 000mA (Max) Operating 0-0 C, 0-0%RH(No condensation) temperature PCI bus specification bit, MHz, Universal key shapes supported * Dimension (mm) (L) x 0(H) Weight 0g * These items can be set by software For the "Driver Library API-PAC(W)" and the "Standard COM Driver Software COM Setup Disk" on the supplied CD-ROM, the range is -,00 bps * Data transmission at high speed may not be performed normally depending on the environment including the type of status of connected material of cable and environment * The interrupt signals from all channels are connected as a single interrupt signal on the PCI bus * This board requires power supply at + V from an expansion slot (it does not work on a machine with a +V power supply alone) (L) 0(H) [mm] The standard outside dimension (L) is the distance from the end of the board to the outer surface of the slot cover

3 Support Software You should use CONTEC support software according to your purpose and development environment Standard COM Driver Software COM Setup Disk COM Setup Disk (Bundled) The purpose of this software is to allow the CONTEC serial communication boards to be used under Windows or Linux in the same way as the standard COM ports on the PC By installing additional boards, you can use COM ports in the range COM - COM The boards can be used for all types of serial communications such as for remote access service (RAS) and uninterruptible power supply (UPS) applications Under Windows, the serial ports can be accessed using the standard Win API communication routines (CreateFile( ), WriteFile( ), ReadFile( ), and SetCommState( ), etc) The serial ports are also compatible with the Visual Basic communication control (MSComm) Under Linux, the serial ports are compatible with the operating system's standard tty driver The standard routines including open( ), close( ), read( ), write( ) are supported < Operating environment > OS Windows XP, 000, NT, Me,, Linux etc The maximum number of COM ports able to be used depends on the configuration of your OS Driver library API-PAC(W) (Available for downloading (free of charge) from the CONTEC web site) API-PAC(W) is the library software that provides the commands for CONTEC hardware products in the form of Windows standard Win API functions (DLL) It makes it easy to create high-speed application software taking advantage of the CONTEC hardware using various programming languages that support Win API functions, such as Visual Basic and Visual C/C++ It can also be used by the installed diagnosis program to check hardware operations CONTEC provides download services (at to supply the updated drivers and differential files For details, visit the CONTEC's Web site < Operating environment > OS Windows XP, 000, NT, Me,, etc Adaptation language Visual C/C++, Visual Basic, Delphi, Builder, etc OthersEach piece of library software requires 0 megabytes of free hard disk space This library provides local routines that are specific to CONTEC (SioOpen( ), SioWrite( ), SioRead( ), SioStatus( ), etc) These are not compatible with the standard Win API communication routines (CreateFile( ) and WriteFile( ), etc) External Connection When connecting directly from the connector on the board to the external device, use the appropriate cable which can be purchased separately If making your own cable, use a CN-DF or similar connector which can be purchased separately CN CN Screw nut:unc#-0(inch screw) Data Set Ready Request to Send Clear to Send Ring Indicator RI CN DCD Data Carrier Detect Receive Data Transmit Data Data Terminal Ready Signal Ground DELC-JPAF-0L (mfd by JAE, Male)equivalent - Applicable connector JE-00-0(DC) (mfd by DDK, Female) CN-DF (mfd by CONTEC, Female) (Five connector set) Data Set Ready Request to Send Clear to Send Ring Indicator RI DCD Data Carrier Detect Receive Data Transmit Data Data Terminal Ready Signal Ground CN

4 When using a COM-P(PCI)H, an alternative to connecting an external device directly to the connector on the board is to use a connection conversion cable Use a PCE/PS connection conversion cable (purchased separately) to connect to external devices after dividing into four -pin D-SUB male connector channels Use cable suitable for use with -pin D-SUB connectors (purchase separately) with the four divided connectors - Cable -conductor shielded cable Cable length : 0mm Conductor size : AWG# -pin D-SUB, male connector UNC #-0 (inch screw) CH CH CH CH DCD DCD CH CH -pin D-SUB, male connector UNC#-0(inch screw) - Applicable connectors JE-00-0(DC) (mfd by DDK, Female) RI RI Connection Conversion Cable (M M x, 0mm) : PCE/PS Use a PCE/PS connection conversion cable (purchased separately) to connect to external devices after dividing into four -pin D-SUB male connector channels Use cable suitable for use with -pin D-SUB connectors (purchase separately) with the four divided connectors - Cable -conductor shielded cable Cable length : 0mm Conductor size : AWG# -pin D-SUB, male connector UNC #-0 (inch screw) CH CH CH NC NC NC NC NC DCD NC CH CH -pin D-SUB, male connector UNC#-0(inch screw) NC - Applicable connectors NC JE-0-0(DC) (mfd by DDK, Female) NC NC NC DCD NC 0 0 CH 0 0 NC NC NC RI NC NC NC NC NC NC NC NC NC NC RI NC NC NC NC NC NC NC Connection Conversion Cable (M M x, 0mm) RS-C Straight Cable with D-SUBP (m) RS-C Cross Cable with D-SUBP (m) RS-C Connection Conversion Straight Cable (F M, m) RS-C Connection Conversion Cross Cable (F F, m) RS-C Connection Conversion Cross Cable(F F, m) : PCE/PS : RSC-F : RSS-F/M : RSC-F/F

5 If connecting an external device directly from the connector on the board, use a CN-DM or equivalent connector 0 Screw nut:unc#-0(inch screw) -pin D-SUB, male connector UNC #-0 (inch screw) -pin D-SUB, female connector DCLC-JSAF-0L (mfd by JAE, Female)equivalent - Applicable connector JE-0-0(DC) (mfd by DDK, Male) FDCD-P (mfd by Hirose, Male) DC-P-N (mfd by JAE, Male) CN-DM (mfd by CONTEC, Male) (Five connector set) CH Receive Data CH Clear to Send CH Signal Ground CH Data Carrier Detect CH Transmit Data CH Request to Send CH Data Set Ready CH Data Terminal Ready CH Ring Indicator CH Receive Data CH Clear to Send CH Signal Ground CH Data Carrier Detect CH Transmit Data CH Request to Send CH Data Set Ready CH Data Terminal Ready CH Ring Indicator DCD RI DCD RI 0 0 CN 0 CH Transmit Data CH Request to Send CH Data Set Ready CH Data Terminal Ready RI CH Ring Indicator CH Receive Data CH Clear to Send CH Signal Ground DCD CH Data Carrier Detect CH Transmit Data CH Request to Send CH Data Set Ready CH Data Terminal Ready RI CH Ring Indicator CH Receive Data CH Clear to Send CH Signal Ground DCD CH Data Carrier Detect NC Types of Cable and Example Connections When using an RS-C interface, different cables are required depending on the type of device to which you are connecting (computer or modem, etc) Check the requirements of the external device and select either a straight-through or crossed (null modem) cable as appropriate If special treatment of the signal lines in the connector is required, ensure that this is done in accordance with the specifications (Transmit Data) (Receive Data) (Request to Send) (Clear to Send) (Data Terminal Ready) (Data Set Ready) (Signal Ground)