DIO-6464LX-USB. Features. Digital I/O Unit with Opto-Isolation for USB DIO-6464LX-USB 1. Ver.1.00

Transcription

1 Digital /O Unit with Opto-solation USB DO-6464LX-USB * Specifications, color and design of the products are subject to change without notice. This product is an USB2.0-compliant digital /O unit used to provide a digital signal /O function on a PC. This product can and digital signals at. This product features 64 channels of isolated s (compatible with current sink ) and 64 channels of isolated open-collector s (current sink type). You can use 16 signals as interrupt s. Equipped with the digital filter function to prevent wrong recognition of signals and transistor protection circuit (surge voltage protection and over current protection). As there is compatible with PC bus-compatible board PO-64/64L(PC)H and PC Express bus-compatible board DO-6464L-PE in terms of connector shape and pin assignments, it is easy to migrate from the existing system. Windows driver is bundled with this product. Possible to be used as a data recording device LabVEW, with dedicated libraries. Features isolated (compatible with current sink 64 channels of isolated s (compatible with current sink ) and 64 channels of isolated open-collector s (current sink type) This product has the 64 channels of isolated s (compatible with current sink ) and the 64 channels of isolated open-collector s (current sink type) whose response speed is 200µsec. Supporting driver voltages of VDC /O. ( external circuit is required separately.) Compatible to USB1.1/USB2.0 Compatible to USB1.1/USB2.0 and capable to achieve high speed transfer at HighSpeed (480 Mbps). USB HUB function This product has the USB HUB function. Max. 4 DO-6464LX-USB can be used in 1 USB port of PC. When you use 4 or more DO-6464LX-USB, you can do by connecting DO-6464LX-USB to the another USB port of PC side. Also, you can connect the CONTEC s USB device other than DO-6464LX-USB to the USB port of DO-6464LX-USB. *1*2 USB cable USB cable USB cable USB cable terminal provided per 16 channels terminal provided per 16 channels, capable of supporting a different external. bus isolation As the USB (PC) is isolated from the and interfaces by s, this product has excellent noise permance. You can use 16 signals as interrupt request signals. You can use 16 signals as interrupt request signals and also disable or enable the interrupt in bit units and select the edge of the signals, at which to generate an interrupt.. This product has a digital filter to prevent wrong recognition of signals from carrying noise or a chattering. This product has a digital filter to prevent wrong recognition of signals from carrying noise or a chattering. All terminals can be added a digital filter, and the setting can be permed by software. Output circuits include zener diodes surge voltage protection and poly-switches overcurrent protection. Zener diodes are connected to the circuits to protect against surge voltages. Similarly, polyswitches are fitted to each group of 8channels s over-current protection. The rating is max. 35VDC, 100mA per channel. Connectors are compatible with PC/PC Express bus-compatible board As there is compatible with PO-64/64L(PC)H and DO-6464L-PE in terms of connector shape and pin assignments, it is easy to migrate from the existing system. f the system of this product is created by the digital /O driver AP-DO(98/PC), it is required to replace it with AP-DO(WDM). Windows compatible driver libraries are attached. Using the attached digital /O driver AP-DO(WDM) makes it possible to create applications of Windows. n addition, a diagnostic program by which the operations of hardware can be checked is provided. LabVEW is supported by a plug-in of dedicated library V-DAQ. Using the dedicated library V-DAQ makes it possible to make a LabVEW application. *1 Do not connect the device other than that of CONTEC s USB to the USB port included on the DO-6464LX-USB. Otherwise, this may cause a failure or malfunction. *2 When connecting multiple units with USB HUB function and set up them, do one at a time and complete setup the previous unit bee starting to do the next unit. DO-6464LX-USB 1

2 Specification tem Specification nput section Number of signal channels 64 channels (16 channels available interrupts) (1 common in 16 channels unit) nput mat isolated (Compatible with current sink ) (Negative logic *1) nput resistance 4.7kΩ nput ON current 2.0mA or more nput OFF current 0.16mA or less nterrupt 16 interrupt signals are arranged into a single of interrupt request signal NTA. An interrupt is generated at the rising edge (HGH-to-LOW transition) or falling edge (LOW-to-HGH transition) (set by software). Response time 200μsec within *2 Output section Number of signal 64 channels (1 common in 16 channels unit) channels Output mat isolated open collector (current sink type) (Negative logic*1) Output Output voltage 35VDC (Max.) rating Output current 100mA (per channel) (Max.) Residual voltage with on 0.5V or less (Output current 50mA), 1.0V or less (Output current 100mA) Surge protector Zener diode RD47FM(NEC) or equivalent Response time 200μsec within *2 USB section Bus specification USB Specification 2.0/1.1 standard USB transfer rate 12Mbps (Full-speed), 480Mbps (High-speed) *3 Power supply Self-power section Number of terminals 127 terminals (Max.) *4 used at the same time Dielectric strength 250Vrms circuit power (±10%) supply*5 Current consumption 5VDC 550mA (Max.) Operating conditions 0-50ºC, 10-90%RH (No condensation) Allowable distance of Approx. 50m (depending on wiring environment) signal extension Physical dimensions 180(W) x 140(D) x 34(H) (No protrusions) (mm) Weight 300g (Not including the USB cable, attachment) Connector 100 pin 0.8mm pitch connector [F (female) type] x 2 HDRA-E100W1LFDT1EC-SL+[HONDA TSUSHN KOGYO CO., LTD.] or equivalent to it Attached cable USB cable 1.8m *1 Data 0 and 1 correspond to the High and Low levels, respectively. *2 The 's response time comes. *3 This depends on the PC environment used (OS and USB host controller). *4 As a USB hub is also counted as one device, you cannot just connect 127 USB unit. *5 circuit is required separately. Support Software Windows version of digital /O driver AP-DO(WDM) [Stored on the bundled CD-ROM driver library AP-USBP(WDM)] t is the library software, and which supplies command of hardware produced by our company in the m of standard Win32 AP function (DLL). Using programming languages supporting Win32AP functions, such as Visual Basic and Visual C++ etc., you can develop high-speed application software with feature of hardware produced by our company. n addition, you can verify the operation of hardware using Diagnostic programs. < Operating environment > OS Windows 7, Vista, XP, Server 2003, 2000, Me, 98 Adaptation language Visual Basic, Visual C++, Visual C#, Delphi, C++ Builder For more details on the supported OS, applicable language and how to download the updated version, please visit the CONTEC s Web site ( Data acquisition V library LabVEW V-DAQ (Available downloading (free of charge) from the CONTEC web site.) This is a V library to use in National nstruments LabVEW. V-DAQ is created with a function m similar to that of LabVEW's Data Acquisition V, allowing you to use various devices without complicated settings. See details and download of V-DAQ. Cable & Connector Cable (Option) Shielded Cable With Two 100pin Connector : PCB100PS-0.5 (0.5m), PCB100PS-1.5 (1.5m), PCB100PS-3 (3m), PCB100PS-5 (5m) Connection Conversion Shield Cable (100P 96P) : PCB100/96PS-1.5 (1.5m), PCB100/96PS-3 (3m), PCB100/96PS-5 (5m) Flat Cable with One 100-Pin Connector : PCA100P-1.5 (1.5m), PCA100P-3 (3m), PCA100P-5 (5m) Connection Conversion Shield Cable (100P P D-SUB x 2) : PCB100WS-1.5 (1.5m), PCB100WS-3 (3m), PCB100WS-5 (5m) * f using both the CNA and CNB connectors, two cable sets are required. Accessories Accessories (Option) Screw Terminal Unit (M3 x 100P) : EPD-100A *1*4*6 Screw Terminal Unit (M3 x 96P) : EPD-96A *2*4*6 Screw Terminal Unit (M3.5 x 96P) : EPD-96 *2*4 Terminal Unit Cables (M2.5 x 96P) : DTP-64(PC) *2*4 Connector Conversion Board (96-Pin -Pin x 2) : CCB-96 *2*4 Signal Monitor / Output Accessory Digital /O (64P) : CM-64(PC)E *2*4 Screw Terminal Unit (M3 x P) : EPD-A *3*5*6 Screw Terminal Unit (M3.5 x P) : EPD- *3*5 General Purpose Terminal (M3 x P) : DTP-3A *3*5 Screw Terminal (M2.6 x P) : DTP-4A *3*5 AC adapter ( : VAC, : 5VDC 2.0A) : POA *7 USB /O Unit Bracket X Series : BRK-USB-X *1 PCB100PS optional cable is required separately. *2 PCB100/96PS optional cable is required separately. *3 PCB100WS optional cable is required separately. *4 f using both the CNA and CNB connectors, two each of the terminal block and cable sets are required. *5 f using both the CNA and CNB connectors, two cable sets are required. You will also require sufficient terminal blocks the number of /O points you are using. *6 Spring-up type terminal is used to prevent terminal screws from falling off. *7 t is the same as the one appended to the product. Please buy it necessary maintenance. * Check the CONTEC s Web site more inmation on these options. DO-6464LX-USB 2

3 Packing List Unit [DO-6464LX-USB] 1 AC adapter 1 AC Cable ( 125VAC) 1 USB cable (1.8m) 1 USB cable attachment on the main unit s side (For Mini B connector side) 1 Clamps prevention of cable on the main unit s side 1 CD-ROM *1 [AP-USBP(WDM)] 1 Power connector MC1,5/3-ST-3,5 1 First step guide 1 Ferrite core 1 *1 The CD-ROM contains the driver software and User s Guide. Block Diagram GND D- D+ VCC USB Connector USB Controll & CPU Physical Dimensions Using the Connectors Opto-coupler & Transistors solated line Digital Output Digital nput /O Connector Connector Pin Assignment Pin Assignments of DO-6464LX-USB nterface Connector (CNA, CNB) P-E/F P-A/B N.C N.C. +E/+F P-E/F P-A/B +A/+B N.C N.C. +F port +E port minus pin +E/+F O-F O-B7 N.C N.C. O-F O-B6 N.C N.C. O-F O-B5 N.C N.C. O-F O-B4 +B port N.C N.C. O-F O-B3 * O-F O-B2 00 * O-F O-B1 * O-F O-B0 +0 port 02 * O-E O-A7 03 * O-E O-A6 * O-E O-A5 05 * CNA CNB O-E4 87 O-A4 +A port 06 * O-E O-A3 * O-E O-A2 0 * O-E O-A1 * O-E O-A0 +1 port * N-E/F N-A/B 3 * N-E/F N-A/B * N-E/F N-A/B * minus N-E/F N-A/B pin * A/+B 7 N-E/F N-A/B P-0/ P-4/5 N-E/F N-A/B +0/+1 P-0/ P-4/5 N.C N.C. N.C N.C. N.C N.C. N.C N.C. P-C/D P-8/9 N.C N.C. +C/+D P-C/D P-8/9 +8/+9 N.C N.C. O-D O-97 N.C N.C. O-D O-96 N.C N.C. O-D O-95 N.C N.C. +D port O-D O port N.C N.C. O-D O O-D O O-D O O-D O Port O-C O O-C O O-C O C port O-C O port O-C O O-C O O-C O O-C O Port N-C/D 56 6 N-8/ N-C/D 55 5 N-8/ minus N-C/D 54 4 N-8/9 minus pin N-C/D 53 3 N-8/9 pin C/+D +8/+9 N-C/D 52 2 N-8/9 P-2/ P-6/7 +2/+3 N-C/D 51 1 N-8/9 P-2/ P-6/7 * can be used as interrupt signal. +4 port +5 port +4/+5 +6 port +7 Port +6/ signal pins. Connect signals from the external device to these pins. O-80 - O-F7 64 signal pins. Connect these pins to the signal pins of the external device. P-0/1 - P-6/7 Connect the positive side of the external. These pins are common to 16 signal pins. P-8/9 - P-E/F Connect the positive side of the external. These pins are common to 16 signal pins. N-8/9 - N-E/F Connect the negative side of the external. These pins are common to 16 signal pins. One pin permissible current of the connector is 0.3A. Please connect necessary number of pins the corresponding total current of the 16 channels. When 16 channels are used by the full ratings (100mA per 1 channel), it is necessary to connect six all. N.C. This pin is left unconnected. Connecting to a Connector To connect an external device to this product, plug the cable from the device into the interface connector (CN1) of unit shown below. nterface connector (CNA, CNB) - Connector used HDRA-E100W1LFDT1EC-SL+ [mfd by HONDA TSUSHN KOGYO CO., LTD.] or equivalent to it - Applicable connector HDRA-E100MA1 [mfd by HONDA TSUSHN KOGYO CO., LTD.] * Please refer to page 2 more inmation on the supported cable and accessories. DO-6464LX-USB 3

4 Pin assignments connecting to the PCB100/96PS or PCB100WS The figure below shows the correspondence between the option cable pins and signals. < Pin assignments connecting a PCB100/96PS or PCB100WS to the DO-6464LX-USB > PCB100/96PS minus pin +C/+D +C port +D port plus pin +C/+D minus pin +E/+F +E port +F port plus pin +E/+F N-C/D B01 A01 N-8/9 minus N.C. B01 A01 N.C. pin +8/+9 N-C/D B02 A02 N-8/9 N.C. B02 A02 N.C. O-C0 B03 A03 O B03 A03-00 O-C1 B04 A04 O B04 A04-01 O-C2 B05 A05 O B05 A05-02 O-C3 B06 A06 O port +4 port -43 B06 A06-03 O-C4 B07 A07 O B07 A07-04 O-C5 B08 A08 O B08 A08-05 O-C6 B09 A09 O B09 A09-06 O-C7 B10 For connecting the board CNB A10 O B10 For connecting the board CNA A10-07 O-D0 B11 A11 O B11 A11-10 O-D1 B12 A12 O B12 A12-11 [96] B01 [48] A01 [96] [48] O-D2 B13 A13 O B13 B01 A01 A13-12 O-D3 B14 A14 O port +5 port -53 B14 A14-13 O-D4 B15 A15 O B15 A15-14 O-D5 B16 A16 O B16 A16-15 O-D6 B17 A17 O B17 A17-16 O-D7 B18 A18 O B18 A18-17 P-C/D B19 A19 P-8/9 plus plus P-4/5 B19 A19 P-0/1 pin +8/+9 pin +4/+5 P-C/D B20 A20 P-8/9 P-4/5 B20 A20 P-0/1 N.C. B21 A21 N.C. N.C. B21 A21 N.C. N.C. B22 A22 N.C. N.C. B22 A22 N.C. N.C. B23 A23 N.C. N.C. B23 A23 N.C. N.C. B24 A24 N.C. N.C. B24 A24 N.C. N.C. B25 A25 N.C. N.C. B25 A25 N.C. N.C. B26 A26 N.C. N.C. B26 A26 N.C. N.C. B27 A27 N.C. N.C. B27 A27 N.C. N.C. B28 A28 N.C. N.C. B28 A28 N.C. N-E/F B29 A29 N-A/B minus N.C. B29 A29 N.C. pin +A/+B N-E/F B30 A30 N-A/B N.C. B30 A30 N.C. O-E0 B31 A31 O-A0-60 B31 A31-20 O-E1 B32 A32 O-A1-61 B32 A32-21 O-E2 B33 A33 O-A2-62 B33 A33-22 O-E3 B34 A34 O-A3 +A port +6 port -63 B34 A34-23 O-E4 B35 A35 O-A4-64 B35 A35-24 O-E5 B36 A36 O-A5-65 B36 A36-25 O-E6 B B48 A48 A O-A6-66 B B48 A48 A -26 O-E7 B38 [49] [1] A38 O-A7-67 B38 [49] [1] A38-27 O-F0 B39 A39 O-B0-70 B39 A39-30 O-F1 B40 A40 O-B1-71 B40 A40-31 O-F2 B41 A41 O-B2-72 B41 A41-32 O-F3 B42 A42 O-B3 +B port +7 port -73 B42 A42-33 O-F4 B43 A43 O-B4-74 B43 A43-34 O-F5 B44 A44 O-B5-75 B44 A44-35 O-F6 B45 A45 O-B6-76 B45 A45-36 O-F7 B46 A46 O-B7-77 B46 A46 - P-E/F B47 A47 P-A/B plus plus P-6/7 B47 A47 P-2/3 pin +A/+B pin +6/+7 P-E/F B48 A48 P-A/B P-6/7 B48 A48 P-2/3 +0 port +1 port plus pin +0/+1 +2 port +3 port plus pin +2/+3 * [ ] shows pin numbers specified by HONDA TSUSHN KOGYO CO., LTD. DO-6464LX-USB 4

5 PCB100WS CN A CN A CN B CN B plus pin +8/+9 +9 port +8 port minus pin +8/+9 plus pin +C/+D +D port +C port minus pin +C/+D N.C. 19 N.C. 19 P-8/9 18 P-A/B plus pin +A/+B +0/+1 P-0/1 18 P-2/3 O CNA of PCB100WS 36 O-B CNA of PCB100WS 36 - connecting to the board CNB connecting to the board CNA O O-B O O-B O O-B4 +1 port B port O O-B O O-B O O-B O O-B O O-A O O-A O O-A O O-A4 +0 port A port O O-A O O-A O O-A O O-A minus N-8/ N-A/B pin +A/+B N.C N.C. N.C. 19 N.C. 19 P-C/D 18 P-E/F plus pin +E/+F +4/+5 P-4/5 18 P-6/7 O-D7 17 CNB of PCB100WS 36 O-F CNB of PCB100WS to the board CNB to the board CNA O-D6 16 connecting 35 O-F connecting O-D O-F O-D O-F4 +5 port F port O-D O-F O-D O-F O-D O-F O-D O-F O-C O-E O-C O-E O-C O-E O-C O-E4 +4 port E port O-C O-E O-C O-E O-C O-E O-C O-E minus N-C/D 1 20 N-E/F pin +E/+F N.C N.C. +2/+3 +3 port +2 port +6/+7 +7 port +6 port DO-6464LX-USB 5

6 Connecting nput Signals Connect the signals to a device which can be current-driven, such as a switch or transistor device. The connection requires an external to feed currents. This product s the ON/OFF state of the current-driven device as a digital value. nput Circuit Connecting Output Signals Connect the signals to a current-driven controlled device such as a relay or LED. The connection requires an external to feed currents. This product controls turning on/off the current-driven controlled device using a digital value. Output Circuit Unit Plus common device Plus common nput pin Switch power supply Zener diode Output pin * * L d power supply nput pin Switch Zener diode Output pin L d PolySwitch * -xx represents the pin. The circuits of interface blocks of this product is illustrated in the image above. The signal s are isolated by s (compatible with current sink ). This product theree requires an external to drive the s. The power requirement each pin is about 5.1mA at 24VDC (about 2.6mA at 12VDC). Connecting a Switch Unit side nput plus common (CNA : 23pin) -00 (CNA : 7pin) Switch When the switch is ON, the corresponding bit contains 1. When the switch is OFF, by contrast, the bit contains 0. + * O-xx represents the pin. Minus common The circuits of interface blocks of this product is illustrated in the image above. The signal section is an isolated, open-collector (current sink type). Driving the section requires an external. The rated current per channel is 100mA at maximum. The section can also be connected to a TTL level as it uses a low-saturated transistor. The residual voltage (low-level voltage) between the collector and emitter with the on is 0.5V or less at an current within 50mA or at most 1.0V at an current within 100mA. A zener diode is connected to the transistor protection from surge voltages. A PolySwitch-based overcurrent protector is provided every 8 transistors. When the overcurrent protector works, the section of this product is temporarily disabled. f this is the case, turn of the power to the PC and the external and wait a few minutes, then turn them on back CAUTON When the PC is turned on, all are reset to OFF. Connection to the LED Unit side O-80 (CNB : 7pin) 51kΩ LED + Output minus common (CNB : 1pin) When "1" is to a relevant bit, the corresponding LED comes on. When "0" is to the bit, in contrast, the LED goes out. DO-6464LX-USB 6

7 FG Vi- Vi+ Ver.1.00 Example of Connection to TTL Level nput - + Connection with 5VDC Power Supply Self-power This product must be connected with 5VDC (in a self-powered state). Connect with 5VDC by using +5VDC pin. 5VDC nput unit FG Vi- Vi+ Vi+ Power supply (5V) Vi- Power supply (GND) Output plus common FG Frame ground 2kΩ Output TTL level When using the attached AC adapter [POA200-20], please connect directly to the terminals. GND 5VDC USB USB Output minus common POA Connecting the Sink Type Output and Sink Output Support nput The following example shows a connection between a sink type ( side) and a sink support ( side). Refer to this connection example when you connect such this product to each other. - + CAUTON Connect 5VDC to the main unit. Next, connect the USB cable to the PC. Do not turn it on or off when using. f you remove, USB cable is first and then 5VDC. When the USB module is not used, leave the AC adapter unplugged. Continuously using the AC adapter heated affects its life. Use the AC adapter not in a closed place but in a well-ventilated place not to be heated. Output unit Output plus common Output (sink type) nput unit nput plus common Difference from DO-6464L-PE and PO-64/64L(PC)H tem DO-6464LX-USB DO-6464L-PE PO-64/64L(PC)H Current consumption 5VDC 550mA 3.3VDC 600mA 5VDC 500mA (Max.) nput (Compatible with sink ) Bus specification USB Specification 2.0/1.1 standard PC Express Base PC(32bit, 33MHz, Specification Rev. 1.0a x1 Universal key shapes supported) Physical dimensions 180(L) x 140(D) x 34(H) (L) x (H) (L) x (H) Output minus common (mm) Weight (No protrusions) 300g 215g 215g (Not including the USB cable, attachment) DO-6464LX-USB 7