Powered to Perform. Everyday Reliability. Exceptional Value. Expertise and Support

Transcription

1 A decentralized solution. Many drive applications utilize control panels with complex wiring taking up large amounts of space. These control panels are often mounted away from the application requiring long expensive cables and other hardware to connect the system. Trans-Power V-Drives provide a decentralized solution where drives can be located close to the application. Featuring on-board power disconnect, programmable forward/reverse selector and speed potentiometer, they allow for localized control. Everyday Reliability Expertise and Support Powered to Perform The support only Kaman can provide. Trans-Power V-Drives are distributed exclusively by Kaman. That means our drives are backed and supported by Kaman. The expert support you need is just a phone call away. And, we have a national network of over 50 locations and distribution centers. So the drives you need are always close by, in stock and ready to ship. Bottom line: we ll make sure you get the right drive for your application and the fast, expert support you deserve. Built to work as hard as you do. When you need durable and reliable applied-power components, depend on Trans-Power. We offer quality-built, tested and proven components that are designed to provide the dependable performance you need for general-purpose applications. Trans-Power components are available exclusively from Kaman, one of the United States leading distributors of industrial solutions. With simplified ordering and off-the-shelf accessibility plus Kaman s unmatched service and technical support Trans-Power can be your source for high-value applied-power components. Whether you need components for manufacturing, logistics or other commercial applications, we re Powered to Perform. Distributed exclusively by Kaman. Exceptional Value Kaman Industrial Technologies Corporation. All rights reserved. Form No (/5) Variable Frequency Drives

2 Built and Tested to Deliver Superior motor control. Obtain the necessary control required for your application. Trans-Power Variable Speed Drives provide flexibility and simplicity for your motor control application. Optimize speed and efficiency for both fixed and variable load demands. In addition, Trans-Power V-Drives are available with an integrated power disconnect for decentralized mounting solution allowing you to reduce component costs and space in your facility. IP66/NEMAX enclosure. Trans-Power drives feature robust NEMA X/ IP66 indoor rated enclosures designed to withstand daily wash-down and provide superior protection against dirt, dust and liquid. These reliable and robust drives are built to perform in the most demanding applications. Simple start up. Trans-Power V-Drives default settings, featuring quick start parameters are suitable for most applications so users can get up and running quickly. For greater control and customization, users can input up to 50 parameters manually or via the optional Trans-Power V-STIK, a small Bluetooth-compatible device that allows for rapid copying of parameters between drives. Features & Specifications Ratings & Selection Dimensions Onboard speed potentiometer for easy adjustment* FEATURES Switched and non-switched options available Intuitive user keypad Bright LED display Single and three-phase input available Simple commissioning Integral RFI filter Modbus communications Compact NEMAX IP66 rated enclosure Brake resistor High overload capability V-STIK Rapid Commissioning Tool Corrosion-resistant aluminum heat sink Preset speeds Digital and analog output relays month warranty Input Ratings Drive Features Drive Specifications Industries: Food and beverage Packaging Conveying Fan and pump Other harsh environments A matched-power solution. Trans-Power V-Drives run well on Trans-Power brand inverter rated motors. For more information on the full line of motors carried in stock please contact your local sales representative or visit: Robust NEMA X / IP66 dust- and water-proof drive enclosure for harsh environments Drive Protection Operational Conditions Global Certifications Maintenance RATINGS & SELECTION Programmable Forward/Off/ Reverse selector switch* Integrated power off disconnect with safety lock out* V-STIK programming tool for rapid commissioning and back of drive parameters *Included on switched version SPECIFICATIONS Supply Voltage Supply Frequency Phase Imbalance Power Cycles Auto Restart Configurable Fwd/0/ Rev Switch Preset Speeds Display Simple Commissioning Enclosure Analog Inputs: two Relay Outputs: one Analog Output / Digital Output Programming Switching Frequency Voltage Boost Dynamic Braking External Braking Resistor DC Injection Braking Volts/Hz Output Frequency Accel/Decel Keypad Speed Control Network Communications PID Control Sink/Source Inputs Under Voltage Overload Capacity Output Short Circuit Drive Over Temperature Electronic Thermal Overload DC Bus Overvoltage Over Current Output Phase Loss of Reference Communication Error Altitude Ambient Temperature Relative Humidity Fault Log Data Logging Monitoring Optional V-Display remote operator keypad with OLED screen 0-80 VAC: +/- 0% 8-6Hz % maximum 0 per hour evenly spaced Yes -- Up to 5 attempts Switched version only preset frequency / speeds 6 character LED display parameter basic set up, 50 total parameters NEMA X/, IP66 (dust / water proof) indoor use 0-0 VDC, - 0mA Built-in form C relay, 50 VAC, 6A /0 VDC, 5A DC 0-0 VDC Keypad or optional V- STIK commissioning and back up drive parameters tool - khz, default 8kHz User selectable Built-in brake chopper, frames & Up to 50% dynamic braking with properly sized resistor Programmable 0-5 seconds at 0.0Hz V/Hz, adjustment user selectable Hz 0. Hz resolution Independent acceleration & deceleration ramps (0.0 to 600 seconds) Standard switched and non switched versions RS-85 wire MODBUS-RTU communications Internal PID control with feedback display Source, VDC Logic Protection against low input line voltage 50% for 60 seconds, 75% for seconds Phase to phase on output Heat sink sensor Electronic thermal overload protection for the connected motor DC Bus trip Over-current / short-circuit protection Open output phase fault Loss of speed reference signal fault Detects communication error,000 m (,00 ft.) derate above,000m:% per 00mm /Max 000m 0 C to 0 C, F 0 F 0% to 95%, non-condensing c UL us, CE, C-tick, RoHS, ISO900, ISO00 Last four faults stored with time stamp Output current, drive temperature, DC bus voltage Hours run meter, energy consumption meter Part Number (without disconnect) Part Number (with disconnect) kw HP 0 5V ± 0%, (0VAC Phase Output), Phase Input TPVG-½-N TPVG-½-S TPVG--N TPVG--S TPVG-½-N B TPVG-½-S B. 00 0VAC ± 0%, Phase Input TPVG-½-N F TPVG-½-S F TPVG--N F TPVG--S F TPVG--N F TPVG--S F TPVG--N BF TPVG--S BF TPVG--N BF TPVG--S BF TPVG-5-N B TPVG-5-S BF 00 0VAC ± 0%, Phase Input TPVG-½-N TPVG-½-S TPVG--N TPVG--S TPVG--N TPVG--S TPVG--N BF TPVG--S BF TPVG--N BF TPVG--S BF TPVG-5-N BF TPVG-5-S BF 80 80VAC ± 0%, Phase Input TPVG--N F TPVG--S F TPVG--N F TPVG--S F TPVG--N BF TPVG--S BF TPVG--N BF TPVG--S BF TPVG-5-N BF TPVG-5-S BF TPVG-7½-N BF TPVG-7½-S BF 5.5 TPVG-0-N BF TPVG-0-S BF 0.0 Output Current (A) Weight (lbs) Frame Size DIMENSIONS Frame Size PART NUMBER STRUCTURE Height Width Depth H D W

3 A decentralized solution. Many drive applications utilize control panels with complex wiring taking up large amounts of space. These control panels are often mounted away from the application requiring long expensive cables and other hardware to connect the system. Trans-Power V-Drives provide a decentralized solution where drives can be located close to the application. Featuring on-board power disconnect, programmable forward/reverse selector and speed potentiometer, they allow for localized control. Everyday Reliability Expertise and Support Powered to Perform The support only Kaman can provide. Trans-Power V-Drives are distributed exclusively by Kaman. That means our drives are backed and supported by Kaman. The expert support you need is just a phone call away. And, we have a national network of over 50 locations and distribution centers. So the drives you need are always close by, in stock and ready to ship. Bottom line: we ll make sure you get the right drive for your application and the fast, expert support you deserve. Built to work as hard as you do. When you need durable and reliable applied-power components, depend on Trans-Power. We offer quality-built, tested and proven components that are designed to provide the dependable performance you need for general-purpose applications. Trans-Power components are available exclusively from Kaman, one of the United States leading distributors of industrial solutions. With simplified ordering and off-the-shelf accessibility plus Kaman s unmatched service and technical support Trans-Power can be your source for high-value applied-power components. Whether you need components for manufacturing, logistics or other commercial applications, we re Powered to Perform. Distributed exclusively by Kaman. Exceptional Value Kaman Industrial Technologies Corporation. All rights reserved. Form No (/5) Variable Frequency Drives

4 Built and Tested to Deliver Superior motor control. Obtain the necessary control required for your application. Trans-Power Variable Speed Drives provide flexibility and simplicity for your motor control application. Optimize speed and efficiency for both fixed and variable load demands. In addition, Trans-Power V-Drives are available with an integrated power disconnect for decentralized mounting solution allowing you to reduce component costs and space in your facility. IP66/NEMAX enclosure. Trans-Power drives feature robust NEMA X/ IP66 indoor rated enclosures designed to withstand daily wash-down and provide superior protection against dirt, dust and liquid. These reliable and robust drives are built to perform in the most demanding applications. Simple start up. Trans-Power V-Drives default settings, featuring quick start parameters are suitable for most applications so users can get up and running quickly. For greater control and customization, users can input up to 50 parameters manually or via the optional Trans-Power V-STIK, a small Bluetooth-compatible device that allows for rapid copying of parameters between drives. Features & Specifications Ratings & Selection Dimensions Onboard speed potentiometer for easy adjustment* FEATURES Switched and non-switched options available Intuitive user keypad Bright LED display Single and three-phase input available Simple commissioning Integral RFI filter Modbus communications Compact NEMAX IP66 rated enclosure Brake resistor High overload capability V-STIK Rapid Commissioning Tool Corrosion-resistant aluminum heat sink Preset speeds Digital and analog output relays month warranty Input Ratings Drive Features Drive Specifications Industries: Food and beverage Packaging Conveying Fan and pump Other harsh environments A matched-power solution. Trans-Power V-Drives run well on Trans-Power brand inverter rated motors. For more information on the full line of motors carried in stock please contact your local sales representative or visit: Robust NEMA X / IP66 dust- and water-proof drive enclosure for harsh environments Drive Protection Operational Conditions Global Certifications Maintenance RATINGS & SELECTION Programmable Forward/Off/ Reverse selector switch* Integrated power off disconnect with safety lock out* V-STIK programming tool for rapid commissioning and back of drive parameters *Included on switched version SPECIFICATIONS Supply Voltage Supply Frequency Phase Imbalance Power Cycles Auto Restart Configurable Fwd/0/ Rev Switch Preset Speeds Display Simple Commissioning Enclosure Analog Inputs: two Relay Outputs: one Analog Output / Digital Output Programming Switching Frequency Voltage Boost Dynamic Braking External Braking Resistor DC Injection Braking Volts/Hz Output Frequency Accel/Decel Keypad Speed Control Network Communications PID Control Sink/Source Inputs Under Voltage Overload Capacity Output Short Circuit Drive Over Temperature Electronic Thermal Overload DC Bus Overvoltage Over Current Output Phase Loss of Reference Communication Error Altitude Ambient Temperature Relative Humidity Fault Log Data Logging Monitoring Optional V-Display remote operator keypad with OLED screen 0-80 VAC: +/- 0% 8-6Hz % maximum 0 per hour evenly spaced Yes -- Up to 5 attempts Switched version only preset frequency / speeds 6 character LED display parameter basic set up, 50 total parameters NEMA X/, IP66 (dust / water proof) indoor use 0-0 VDC, - 0mA Built-in form C relay, 50 VAC, 6A /0 VDC, 5A DC 0-0 VDC Keypad or optional V- STIK commissioning and back up drive parameters tool - khz, default 8kHz User selectable Built-in brake chopper, frames & Up to 50% dynamic braking with properly sized resistor Programmable 0-5 seconds at 0.0Hz V/Hz, adjustment user selectable Hz 0. Hz resolution Independent acceleration & deceleration ramps (0.0 to 600 seconds) Standard switched and non switched versions RS-85 wire MODBUS-RTU communications Internal PID control with feedback display Source, VDC Logic Protection against low input line voltage 50% for 60 seconds, 75% for seconds Phase to phase on output Heat sink sensor Electronic thermal overload protection for the connected motor DC Bus trip Over-current / short-circuit protection Open output phase fault Loss of speed reference signal fault Detects communication error,000 m (,00 ft.) derate above,000m:% per 00mm /Max 000m 0 C to 0 C, F 0 F 0% to 95%, non-condensing c UL us, CE, C-tick, RoHS, ISO900, ISO00 Last four faults stored with time stamp Output current, drive temperature, DC bus voltage Hours run meter, energy consumption meter Part Number (without disconnect) Part Number (with disconnect) kw HP 0 5V ± 0%, (0VAC Phase Output), Phase Input TPVG-½-N TPVG-½-S TPVG--N TPVG--S TPVG-½-N B TPVG-½-S B. 00 0VAC ± 0%, Phase Input TPVG-½-N F TPVG-½-S F TPVG--N F TPVG--S F TPVG--N F TPVG--S F TPVG--N BF TPVG--S BF TPVG--N BF TPVG--S BF TPVG-5-N B TPVG-5-S BF 00 0VAC ± 0%, Phase Input TPVG-½-N TPVG-½-S TPVG--N TPVG--S TPVG--N TPVG--S TPVG--N BF TPVG--S BF TPVG--N BF TPVG--S BF TPVG-5-N BF TPVG-5-S BF 80 80VAC ± 0%, Phase Input TPVG--N F TPVG--S F TPVG--N F TPVG--S F TPVG--N BF TPVG--S BF TPVG--N BF TPVG--S BF TPVG-5-N BF TPVG-5-S BF TPVG-7½-N BF TPVG-7½-S BF 5.5 TPVG-0-N BF TPVG-0-S BF 0.0 Output Current (A) Weight (lbs) Frame Size DIMENSIONS Frame Size PART NUMBER STRUCTURE Height Width Depth H D W

5 Built and Tested to Deliver Superior motor control. Obtain the necessary control required for your application. Trans-Power Variable Speed Drives provide flexibility and simplicity for your motor control application. Optimize speed and efficiency for both fixed and variable load demands. In addition, Trans-Power V-Drives are available with an integrated power disconnect for decentralized mounting solution allowing you to reduce component costs and space in your facility. IP66/NEMAX enclosure. Trans-Power drives feature robust NEMA X/ IP66 indoor rated enclosures designed to withstand daily wash-down and provide superior protection against dirt, dust and liquid. These reliable and robust drives are built to perform in the most demanding applications. Simple start up. Trans-Power V-Drives default settings, featuring quick start parameters are suitable for most applications so users can get up and running quickly. For greater control and customization, users can input up to 50 parameters manually or via the optional Trans-Power V-STIK, a small Bluetooth-compatible device that allows for rapid copying of parameters between drives. Features & Specifications Ratings & Selection Dimensions Onboard speed potentiometer for easy adjustment* FEATURES Switched and non-switched options available Intuitive user keypad Bright LED display Single and three-phase input available Simple commissioning Integral RFI filter Modbus communications Compact NEMAX IP66 rated enclosure Brake resistor High overload capability V-STIK Rapid Commissioning Tool Corrosion-resistant aluminum heat sink Preset speeds Digital and analog output relays month warranty Input Ratings Drive Features Drive Specifications Industries: Food and beverage Packaging Conveying Fan and pump Other harsh environments A matched-power solution. Trans-Power V-Drives run well on Trans-Power brand inverter rated motors. For more information on the full line of motors carried in stock please contact your local sales representative or visit: Robust NEMA X / IP66 dust- and water-proof drive enclosure for harsh environments Drive Protection Operational Conditions Global Certifications Maintenance RATINGS & SELECTION Programmable Forward/Off/ Reverse selector switch* Integrated power off disconnect with safety lock out* V-STIK programming tool for rapid commissioning and back of drive parameters *Included on switched version SPECIFICATIONS Supply Voltage Supply Frequency Phase Imbalance Power Cycles Auto Restart Configurable Fwd/0/ Rev Switch Preset Speeds Display Simple Commissioning Enclosure Analog Inputs: two Relay Outputs: one Analog Output / Digital Output Programming Switching Frequency Voltage Boost Dynamic Braking External Braking Resistor DC Injection Braking Volts/Hz Output Frequency Accel/Decel Keypad Speed Control Network Communications PID Control Sink/Source Inputs Under Voltage Overload Capacity Output Short Circuit Drive Over Temperature Electronic Thermal Overload DC Bus Overvoltage Over Current Output Phase Loss of Reference Communication Error Altitude Ambient Temperature Relative Humidity Fault Log Data Logging Monitoring Optional V-Display remote operator keypad with OLED screen 0-80 VAC: +/- 0% 8-6Hz % maximum 0 per hour evenly spaced Yes -- Up to 5 attempts Switched version only preset frequency / speeds 6 character LED display parameter basic set up, 50 total parameters NEMA X/, IP66 (dust / water proof) indoor use 0-0 VDC, - 0mA Built-in form C relay, 50 VAC, 6A /0 VDC, 5A DC 0-0 VDC Keypad or optional V- STIK commissioning and back up drive parameters tool - khz, default 8kHz User selectable Built-in brake chopper, frames & Up to 50% dynamic braking with properly sized resistor Programmable 0-5 seconds at 0.0Hz V/Hz, adjustment user selectable Hz 0. Hz resolution Independent acceleration & deceleration ramps (0.0 to 600 seconds) Standard switched and non switched versions RS-85 wire MODBUS-RTU communications Internal PID control with feedback display Source, VDC Logic Protection against low input line voltage 50% for 60 seconds, 75% for seconds Phase to phase on output Heat sink sensor Electronic thermal overload protection for the connected motor DC Bus trip Over-current / short-circuit protection Open output phase fault Loss of speed reference signal fault Detects communication error,000 m (,00 ft.) derate above,000m:% per 00mm /Max 000m 0 C to 0 C, F 0 F 0% to 95%, non-condensing c UL us, CE, C-tick, RoHS, ISO900, ISO00 Last four faults stored with time stamp Output current, drive temperature, DC bus voltage Hours run meter, energy consumption meter Part Number (without disconnect) Part Number (with disconnect) kw HP 0 5V ± 0%, (0VAC Phase Output), Phase Input TPVG-½-N TPVG-½-S TPVG--N TPVG--S TPVG-½-N B TPVG-½-S B. 00 0VAC ± 0%, Phase Input TPVG-½-N F TPVG-½-S F TPVG--N F TPVG--S F TPVG--N F TPVG--S F TPVG--N BF TPVG--S BF TPVG--N BF TPVG--S BF TPVG-5-N B TPVG-5-S BF 00 0VAC ± 0%, Phase Input TPVG-½-N TPVG-½-S TPVG--N TPVG--S TPVG--N TPVG--S TPVG--N BF TPVG--S BF TPVG--N BF TPVG--S BF TPVG-5-N BF TPVG-5-S BF 80 80VAC ± 0%, Phase Input TPVG--N F TPVG--S F TPVG--N F TPVG--S F TPVG--N BF TPVG--S BF TPVG--N BF TPVG--S BF TPVG-5-N BF TPVG-5-S BF TPVG-7½-N BF TPVG-7½-S BF 5.5 TPVG-0-N BF TPVG-0-S BF 0.0 Output Current (A) Weight (lbs) Frame Size DIMENSIONS Frame Size PART NUMBER STRUCTURE Height Width Depth H D W

6 A decentralized solution. Many drive applications utilize control panels with complex wiring taking up large amounts of space. These control panels are often mounted away from the application requiring long expensive cables and other hardware to connect the system. Trans-Power V-Drives provide a decentralized solution where drives can be located close to the application. Featuring on-board power disconnect, programmable forward/reverse selector and speed potentiometer, they allow for localized control. Everyday Reliability Expertise and Support Powered to Perform The support only Kaman can provide. Trans-Power V-Drives are distributed exclusively by Kaman. That means our drives are backed and supported by Kaman. The expert support you need is just a phone call away. And, we have a national network of over 50 locations and distribution centers. So the drives you need are always close by, in stock and ready to ship. Bottom line: we ll make sure you get the right drive for your application and the fast, expert support you deserve. Built to work as hard as you do. When you need durable and reliable applied-power components, depend on Trans-Power. We offer quality-built, tested and proven components that are designed to provide the dependable performance you need for general-purpose applications. Trans-Power components are available exclusively from Kaman, one of the United States leading distributors of industrial solutions. With simplified ordering and off-the-shelf accessibility plus Kaman s unmatched service and technical support Trans-Power can be your source for high-value applied-power components. Whether you need components for manufacturing, logistics or other commercial applications, we re Powered to Perform. Distributed exclusively by Kaman. Exceptional Value Kaman Industrial Technologies Corporation. All rights reserved. Form No (/5) Variable Frequency Drives