CU42xx //DATASHEET. XS4 2.0 CONTROLLER Cutting-edge design + Amazing technology:

Transcription

1 //DTSHEET XS4.0 TROLLER uttingedge design mazing technology: The SLTO XS4.0 ontroller incorporates the cutting edge design standard of the XS4.0 product range in this technological powerhouse. XS4.0 TROLLER U4xx Publications of SLTO SYSTEMS S.L. are protected by copyright and all rights are reserved. SLTO SYSTEMS publications may not be reproduced in any form or by any means without written permission from the copyright owner.

2 SLTO SYSTEMS I Wirefree Networked Electronic Locking Solutions SLTO XS4.0 TROLLER LINE SLTO s latest ontrol Unit makes it even easier to bring superior access control to your facility thanks to the ability to control and manage multiple doors through one connection and one IP address. This means that extending SLTO access control benefits to all those doors where a standalone electronic escutcheon cannot be fitted (electric strikes, magnets, barriers, elevators, etc.) is even easier and more costeffective. XS4.0 TROLLER: LINE U4E0 Model: U4E0 Power Input: 1VD1 1VD Input 1VD Output (1) Model: U4E0 US485 TMPER REDER 1 REDER MIN FETURES: Online IP based door controller. Two wall reader connection that can be configured as different doors or one door reader in and reader out locking. ntipassback mode available by connecting wall readers and set up as one door. 4 relay outputs. 6 inputs to connect to: Door detector, request to exit switch (RTE), office switch. different tampers: one tamper input and one tamper switch. Door monitoring and tamper monitoring via contacts input (intrusion alarm and door left opened alarm. MEHNIL SPETS: Dimensions: mm x mm x mm (W x H x D). Weight: 0.5kg. ERTIFITIS: E comform UL 94 (pending) F certified Power Input: 1VD1 1VD Input 1VD Output (1) US485 TMPER 1VD Input Power Input: 1VD1 1VD Output (1) US485 TMPER 10aseT 100aseTX REDER 1 REDER REDER 1 REDER Model: U4E0 To be used with all SLTO XS4.0 Readers (WRDxxxx, WRM and WR9004FS 1 series). Model: U400 Virtual network capable through SLTO Virtual Network technology. Power Input: 1VD1 ll communications between the carrier and the wall reader are 1VD Input encrypted and secure REDER 1 1VD Output (1). US485 REDER The maximum cable length between the door controller and the wall TMPER reader is up to 400 meters 3. onnection to the wall reader using 4 wire connection, twisted pair. Power consumption: 1V D 400m (without XS4.0 readers), supplied Model: U400 by an adaptor. POE version to be released. INSTLLTI: 1Vdc Input US485 Tamper input Inputs Power Input: 1VD1 1VD Input 1VD Output (1) US485 TMPER 10aseT 100aseTX Power Input: 1VD1 1VD Input 1VD Output (1) US485 TMPER 10aseT 100aseTX Model: U4E0 REDER 1 REDER 1 REDER Model: REDER U400 Depending on the card and the RFID technology Relay outputs 1 Not available yet. 3 Depending on the cable. Technical specifications SLTO XS4.0 TROLLER datasheet_xs4u4xx_eng_09_15 Power Input: 1VD1 1VD Input 1VD Output (1) US485 TMPER REDER 1 REDER

3 Power Input: 1VD1 10aseT 100aseTX Power Input: 1VD1 Power Input: 1VD1 1VD Input 1VD Output (1) US485 TMPER 10aseT 100aseTX REDER 1 REDER SLTO SYSTEMS I Wirefree Networked Electronic Locking Solutions SLTO XS4.0 TROLLER LINE WITH HOUSING SLTO s latest ontrol Unit makes it even easier to bring superior access control to your facility thanks to the ability to control and manage multiple doors through one connection and one IP address. This means that extending SLTO access control benefits to all those doors where a standalone electronic escutcheon cannot be fitted (electric strikes, magnets, barriers, elevators, etc.) is even easier and more costeffective. With the new XS4.0 ontroller Online with Housing it is easier to install and it enhanced the aesthetic and sturdiness. XS4.0 TROLLER: LINE WITH HOUSING 1(71/8") 56 (1/4") U4E0x U4E0T U4E0G Model: U4E0 1VD Input 1VD Output (1) US485 TMPER REDER 1 REDER 40(91/") MIN FETURES: Online IP based door controller. Two wall reader connection that can be configured as different doors or one door reader in and reader out locking. ntipassback mode available by connecting wall readers and set up as one door. 4 relay outputs. 6 inputs to connect to: Door detector, request to exit switch (RTE), office switch. different tampers: one tamper input and one tamper switch. Door monitoring and tamper monitoring via contacts input (intrusion alarm and door left opened alarm. MEHNIL SPETS: Dimensions: 1mm x 40mm x 56mm (W x H x D). Weight: 0.7kg. INSTLLTI: 1 To be used with all SLTO XS4.0 Readers (WRDxxxx, WRM and WR9004FS 1 series). 1(71/8") 56 (1/4") Virtual network capable through SLTO Virtual Network technology. ll communications between the carrier and the wall reader are encrypted and secure. The maximum cable length between the door controller and the wall Model: U400 reader is up to 400 meters 3. onnection to the 1VD wall Input reader using 4 wire connection, twisted pair. REDER 1 1VD Output (1) Power consumption: US485 1V D 400m (without XS4.0 readers), supplied REDER TMPER by an adaptor. POE version to be released. different Housing finishes translucent or grey opac. 8 prepunched holes to fit the wiring. Screws and caps included. 40(91/") ERTIFITIS: E comform UL 94 (pending) F certified 3 4 Do not use the jumper on tamper input Model: U4E0 1 Not available yet. Depending on the card and the RFID technology 3 Depending on the cable. Technical specifications SLTO XS4.0 TROLLER datasheet_xs4u4xx_eng_09_15

4 10aseT 100aseTX SLTO SYSTEMS I Wirefree Networked Electronic Locking Solutions XS4.0 TROLLER LINE DOOR TROLLER SETUP: Door (in & out) LINE TROLLER (U4E0): onnection with the server via 100SETX or 10aseT. Requires one IP address. Initialization via online connection. Set up through SLTO Proccess SPE software. Set up: s One door (reader in & reader out). Two doors (reader one door one, reader two door two). Supports up to 4 auxiliar controllers (U4000). One IP address needed to control up to 10 doors. 100SETX Power Input: 1VD1 1VD Input 1VD Output (1) US485 TMPER Model: U4E0 REDER 1 REDER Door 1 Door Door (in & out) Door 3 Door 4 LINE UXILIR TROLLER (U400): onnection with the online controller (U4E0) via US485. Do not requires IP address. Initialization via online connection. Set up through SLTO Proccess SPE software. Set up: s One door (reader in & reader out). Two doors (reader one door one, reader two door two). Model: U400 Power Input: 1VD1 1VD Input 1VD Output (1) US485 TMPER REDER 1 REDER Door (in & out) Door 5 Door 6 Model: U400 Power Input: 1VD1 1VD Input 1VD Output (1) 1VD Input US485 TMPER US485 TMPER REDER 1 REDER Model: U400 Power Input: 1VD1 1VD Output (1) 1VD Input US485 TMPER REDER 1 REDER Model: U400 Power Input: 1VD1 1VD Output (1) REDER 1 REDER Door D (in & out) Door 7 Door 8 Door E (in & out) Door 9 Door 10 Technical specifications SLTO XS4.0 TROLLER datasheet_xs4u4xx_eng_09_15 Model: U4E0

5 SLTO SYSTEMS I Wirefree Networked Electronic Locking Solutions SLTO XS4.0 UXILIR OR OFFLINE TROLLER SLTO s latest ontrol Unit makes it even easier to bring superior access control to your facility thanks to the ability to Power Input: 1VD1 control and manage multiple doors through one connection and one IP address. 1VD Input REDER TMPER The New SLTO XS4.0 ontroller U400 is an auxiliar controller that do not requires an IP address and can be set up as an auxiliar controller connected to an XS4 online controller (U4E0) or can work as offline controller reducing the costs of installation keeping all the advantages of the SLTO Dataoncard technology. XS4.0 TROLLER: UXILIR OR OFFLINE 1VD Output (1) US485 Model: U4E0 REDER 1 10aseT 100aseTX 10aseT 100aseTX U400 Model: U400 Model: U400 Power Input: 1VD1 MIN FETURES: 1VD Input 1VD Output (1) Power Input: 1VD1 US485 1VD Input TMPER 1VD Output (1) US485 TMPER REDER 1 REDER REDER 1 REDER Two wall reader connection that can be configured as different doors 1, or one door readerin and readerout locking if set up as offline and programmed via PPD. ntipassback mode available by connecting wall readers and set up as one door. 4 relay outputs. 6 inputs to connect to: Door detector, request to exit switch (RTE), office switch. different tampers: One tamper input, and one tamper switch. Door monitoring and tamper monitoring via contacts input (intrusion alarm and door left opened alarm). MEHNIL SPETS: Dimensions: mm x mm x mm (W x H x D). Weight: 0.5kg. ERTIFITIS: E comform UL 94 (pending) F certified To be used with all SLTO XS4.0 Readers (WRDxxxx, WRM and WR9004FS 3 series). Virtual network capable Model: through U4E0 SLTO Virtual Network technology. ll communications between the carrier and the wall reader are encrypted and secure 4. The maximum cable length between the door controller and the wall reader is up to 400 meters 5. onnection to the wall reader using 4 wire connection, twisted pair. Power consumption: 1V D 400m (without XS4.0 readers), supplied by an adaptor. INSTLLTI: 1Vdc Input US485 Tamper input Power Input: 1VD1 1VD Input REDER 1 1VD Output (1) US485 REDER TMPER Model: U4E0 Power Input: 1VD1 1VD Input 10aseT REDER 1 1VD Output (1) 100aseTX US485 REDER TMPER Inputs 10aseT 100aseTX Model: U400 Power Input: 1VD1 1VD Input 1VD Output (1) US485 TMPER Model: U400 REDER 1 REDER Power Input: 1VD1 1VD Input REDER 1 1VD Output (1) 1 If the controller US485 is set up as an auxiliar controller and conneted to a U4E0 by US485 REDER TMPER Relay outputs If connected to an online U4E0or via audit trail if offline. 3 Not available yet. 5 Depending on the card and the RFID technology 5 Depending on the cable. Technical specifications SLTO XS4.0 TROLLER datasheet_xs4u4xx_eng_09_15

6 Power Input: 1VD1 10aseT 100aseTX Power Input: 1VD1 Power Input: 1VD1 1VD Input 1VD Output (1) US485 TMPER 10aseT 100aseTX REDER 1 REDER SLTO SYSTEMS I Wirefree Networked Electronic Locking Solutions 1(71/8") 56 (1/4") SLTO XS4.0 UXILIR OR OFFLINE TROLLER WITH HOUSING 1VD Input REDER 1 1VD Output (1) SLTO s latest ontrol Unit makes it even easier to bring superior access control US485 to your facility thanks to the ability to REDER TMPER control and manage multiple doors through one connection and one IP address. The New SLTO XS4.0 ontroller U400 is an auxiliar controller that do not requires an IP address and can be set up as an auxiliar controller connected to an XS4 online controller (U4E0) or can work as offline controller reducing the costs of installation keeping all the advantages of the SLTO Dataoncard technology. With the new XS4.0 uxiliar ontroller with Housing it is easier to install and it enhanced the aesthetic and sturdiness. XS4.0 TROLLER: UXILIR OR OFFLINE WITH HOUSING 40(91/") Model: U4E0 1(71/8") 56 (1/4") U400x U400T U400G Model: U400 1VD Input 1VD Output (1) US485 TMPER REDER 1 REDER 40(91/") MIN FETURES: Two wall reader connection that can be configured as different doors 1, or one door readerin and readerout locking if set up as offline and programmed via PPD. ntipassback mode available by connecting wall readers and set up as one door. 4 relay outputs. 6 inputs to connect to: Door detector, request to exit switch (RTE), office switch. different tampers: One tamper input, and one tamper switch. Door monitoring and tamper monitoring via contacts input (intrusion alarm and door left opened alarm). MEHNIL SPETS: Dimensions: 1mm x 40mm x 56mm (W x H x D). Weight: 0.7kg. INSTLLTI: 1 To be used with all SLTO XS4.0 Readers (WRDxxxx, WRM and WR9004FS 3 series). Virtual network capable through SLTO Virtual Network technology. ll communications between the carrier and the wall reader are encrypted and secure 4. The maximum cable length between the door controller and the wall reader is up to 400 meters 5. onnection to the wall reader using 4 wire connection, twisted pair. Power consumption: 1V D 400m (without XS4.0 readers), supplied by an adaptor. different Housing finishes translucent or grey opac. 8 prepunched holes to fit the wiring. Screws and caps included. ERTIFITIS: E comform UL 94 (pending) F certified 3 4 Do not use the jumper on tamper input Model: U4E0 Technical specifications SLTO XS4.0 TROLLER datasheet_xs4u4xx_eng_09_15

7 SLTO SYSTEMS I Wirefree Networked Electronic Locking Solutions XS4.0 TROLLER UXILIR OR OFFLINE DOOR TROLLER SETUP: Door (in & out) OFFLINE UXILIR TROLLER (U400): No online connection. Do not requires IP address. Initialization via PPD connection with the 3 pin cables directely to the controller or via PPD contactless through the wall reader. Set up through SLTO Proccess SPE software. Set up: as one door (reader in & reader out). ccess plan update via SLTO Virtual Network capabilities. user access plan and blacklist (list of users card cancelled) is transmited via the Dataoncard technology. Model: U400 Power Input: 1VD1 1VD Input 1VD Output (1) US485 TMPER REDER 1 REDER Technical specifications SLTO XS4.0 TROLLER datasheet_xs4u4xx_eng_09_15

8 SLTO SYSTEMS I Wirefree Networked Electronic Locking Solutions ESS TROL FETURES: Maximum number of users per door Maximum number of doors per system Maximum events on controller audit Time zones utomatic changes tables in system alendars in system ccess levels in system Zones in system Management software R&W SVN 4,000,000 64,000 5, ,04 56 unlimited 1,04 Proccess SPE SLTO VIRTUL NETWORK PILITIES VILLE OPENING MODES: dd or delete access privileges at will to the ID carriers. The ability to validate the expiry date of key cards on any SVN Online wall reader. dd security through additional authenticated validation procedures including pin codes as well the ability to blacklist cards from the system. On card audittrailing to track staff or visitor movement. Lock specific battery power data is registered on any card using the lock staff or visitor and transferredback to the P control software via any update reader just by using the system. Expiracy date can be extended if network connection is lost. LINE FETURES FOR LINE TROLLERS RELTIME ESS TROL HNGES: Live monitoring of user entry and exit through the door controller. Live audit trail build up on the software. Door monitoring status for forced door and door left open alarm. Remote door opening from software. Door lock out or lock open emergency setting from software. The IP door controller can be included in roll call set up used, for example for user location monitoring parking controls etc Works as Online hub up to Online Energy Saving Devices (pending). onected to standard network. Works offline if the network connection is lost. ommunications betwwen the SLTO Service /online controller and auxiliary controller is secured and encrypted by ES 18 encryption. Invalidates deleted cards. STNDRD: Locked at all times. UTOMTI HNGES: ny opening mode can be performed through logical set up of the controller. ESSORIES: Model SP4861 onnecting circuit RJ45 cable adaptor for U4E0 or U400. Model SP4895 onnecting circuit adaptor for RJ45 cable for WRDxxx series. Technical specifications SLTO XS4.0 TROLLER datasheet_xs4u4xx_eng_09_15 DatasheetXS4U4xx_ENG_09_15 SLTO Systems reserves the right to modify technical specifications, designs and performance without notice. SLTO SYSTEMS 015