SWITCH DISCONNECTORS 11

Transcription

1 SWITCH DISCONNECTORS 16A to 1600A ratings Versions: direct operating handle, door coupling and in housing Wide range of accessories Types for photovoltaic applications up to 850A 1000VDC in DC21B duty Changeover switches in polycarbonate enclosure. GA series 16A to 125A SEC. - PAGE Three-pole switch disconnectors Fourth pole add on Add-on blocks and accessories Empty non-metallic enclosures... - Enclosed switch disconnectors Enclosed changeover switches GE series 50A to 1600A Three-pole switch disconnectors Three-pole switch disconnectors with fuse holder Four-pole switch disconnectors Four-pole switch disconnectors with fuse holder Three-pole changeover switches Four-pole changeover switches Add-on blocks and accessories Combinations For photovoltaic applications CIRCUIT PROTECTION AND ISOLATION

2 Overview GA series 16A to 125A DIRECT OPERATING HANDLE AND DOOR MOUNT VERSION DOOR COUPLING VERSION 36mm / 1.42 width 70mm / 2.75 width 36mm / 1.42 width 70mm / 2.75 width IEC AC21A 16A 25A 32A 40A 63A 63A 80A 100A 125A 16A 25A 32A 40A 63A 80A 100A 125A Three pole 4th pole - simultaneous closing 4th pole - early-make closing Three-pole for photovoltaic applications Fuse holder Mechanical 6-8 pole coupling system Mechanical interlock for line switching ENCLOSED VERSION - IEC/EN TYPE IP65 ENCLOSED VERSION - UL/CSA TYPE 4/4X WITH RED/ YELLOW OR BLACK HANDLE WITH RED/ YELLOW OR BLACK HANDLE IEC AC21A 16A 25A 32A 40A 63A 63A 80A 100A 125A 16A 25A 32A 40A 63A 63A 80A 100A 125A UL/CSA general use 600VAC 16A 25A 32A 40A 60A 60A 100A 100A 100A Enclosure width Enclosure width 100mm / mm / mm 100mm / mm / 220mm / SWITCH DISCONNECTORS Three pole Four pole Enclosure width CHANGEOVER SWITCHES 175mm / mm / 8.66 Three pole Four pole GE series 50A to 1600A Switch disconnectors Changeover switches DIRECT OPERATING AND DOOR COUPLING VERSION IEC AC21A 50A 125A 160A 200A 250A 315A 400A 500A 630A 800A 1000A 1250A 1600A SWITCH DISCONNECTORS 50A TO 1600A Three and four pole Three and four pole with NFC fuse holder Three and four pole with NH fuse holder Three and four pole with BS fuse holder Four-pole for photovoltaic applications CHANGEOVER SWITCHES 160A TO 1600A Three and four pole Motorised control unit -2

3 Overview VERSATILITY! COMPACT SIZE The three-pole 16A to 63A switch disconnectors, are made up of a single unit body, merely 36mm/1.4 wide, while the 63A to 125A ratings, of another body size of only 70mm/2.8 wide. ACCESSORY FLEXIBILITY Mounting and removal of the fourth pole and add-on blocks are simple and quick operations with no need of tools. VERSION FOR PHOTOVOLTAIC APPLICATIONS The GA...D type switch disconnectors are suitable for both small domestic installations as well as those with a large number of solar cells. Use up to 1000V in DC21B category. CERTIFICATIONS All GA series switch disconnectors are certified by EAC, ccsaus and UL Listed for Canada and USA. The 16A to 63A types are certified according to UL508/CSA 22.2 n 14 while the 63A to 125A types to UL98/CSA 22.2 n 4 standards. SIDE MOUNT ADD-ON FOURTH POLE Simultaneous or early-make contact operation of the fourth pole with respect to the switch disconnector poles. 6 AND 8 POLE VERSION A mechanical coupling system is available for the 16A to 125A switch disconnectors with direct operating handle to provide 6/8 pole disconnectors along with a mechanical interlock mechanism for the line changeover function (I II). Enclosed changeover switches are available in a variety of ratings and ccsaus certified. IP65 PADLOCKABLE HANDLES Wide range of selector or pistol grip handles, with screw or ring fixing. All handles are equipped with builtin padlockable mechanism. The selector handle GAX63... snaps onto the door-mount switch disconnectors in16a to 40A ratings, with no need of tools. SWITCH STATUS INDICATION The switch open or closed state is clearly and unequivocally seen at a distance thanks to the simple and modern design of the handle. DIN RAIL FIXING Switch disconnector mounting on and removal from the 35mm (IEC/EN 60715) DIN rail are done by simply pressing it downwards with no need of tools. PAD INSERT FOR NO SLIDING ADD-ON AUXILIARY CONTACTS One only add-on block suitable for all the 8 ratings of switch disconnectors, having simultaneuous operation with the switch poles. There are versions with an early-break NO contact. MAXIMUM COMBINATIONS Mounting up to 4 auxiliary contacts or 1 fourth pole and 3 auxiliary contacts (2 blocks always on the right and 2 on the left side) of each switch disconnector. The earth and neutral terminals and fuse holder also can be added. 9mm/0.35 FUSE HOLDERS A three-pole fuse holder can be added to 16A to 32A switch disconnectors, with direct operating handle, to provide a single compact unit. Access to the fuse can be made only when the disconnector is in OFF position. UL Listed type up to 25A class CC fuses. REDUCED HANDLE THICKNESS GAX61 and GAX 61 B handles are only 23mm/0.9 thick. HANDLE ADAPABILITY The extensive number of fixing holes in the front handle plate can replace switch disconnectors, normally found out in the field, without having to drill others. DEFEATABLE UL508A HANDLE VERSION In compliance with UL508A standards, which require internal panel inspection by authorised personnel with power applied, selector and lever handles are available with defeatable feature of the door coupling when the switch disconnector is closed, i.e. in ON position. A rubber pad insert prevents the sliding of switch disconnectors on the DIN rail even when out of tolerance or mounted vertically. TERMINAL ADAPTABILITY Terminals are suitable to accept any type of cable: flexible, rigid, AWG wire. The terminals can withstand high tightening torques. HIGH IEC CAPABILITY IN AC23 The rated currents Ie in AC23 at 690VAC are the highest of the category. MODULARITY The switch disconnectors can be mounted in modular panels. 23mm/0.9-3

4 GA series 16A to 125A Three-pole switch disconnectors GA016 A... GA040 A GA063 SA GA016 C... GA040 C GA063 A... GA125 A GA063 C... GA125 C Order code IEC conven- IEC rated Qty Wt tional free air operational per thermal current Ie pkg current Ith AC21A AC22A ( 690V) ( 690V) AC23A ( 415V) [A] [A] n [kg] Direct operating version, complete with black handle. For door-coupling version, separately purchase the handle and shaft extension; refer to pages -9 and -10. GA016 A GA025 A GA032 A GA040 A GA063 SA GA063 A GA080 A GA100 A GA125 A Door-mount version, complete with shaft; separately purchase the handle, refer to pages -9. GA016 C GA025 C GA032 C GA040 C GA063 C GA080 C GA100 C GA125 C Strokes of GA switch poles Travel GA016 A...GA040 A - GA063SA GA016 C...GA040 C General characteristics IEC 16A to 125A ratings Available versions: Direct operating Door mount Door coupling version. Use switch disconnector with direct operating handle and separately purchase the handle and shaft extension for this version. See pages -9 and -10 Compact and modular size Screw or 35mm DIN (IEC/EN 60715) rail fixing Padlockable in 0 position with no extra accessory. Operational characteristics IEC rated insulation voltage Ui: 1000V IEC rated impulse withstand Uimp: 8kV Electrical life in IEC AC21A: 100,000 cycles for GA016-GA040 15,000 cycles for GA063 SA 30,000 cycles for GA063-GA125 Mechanical life: 100,000 cycles for GA016-GA040-GA063 SA 30,000 cycles for GA063-GA125. Certifications obtained: EAC KEMA culus per UL508 / CSA C22.2 n 14 UL Listed (File E93602) culus per UL98 / CSA C22.2 n 4 UL Listed (File E328470) Type GA016 A...GA040 A GA063 SA GA016 C...GA040 C GA063 A...GA125 A GA063 C...GA125 C GA063 A...GA125 A 55 Certification obtained. UL/CSA ratings GA063 C...GA125 C OFF 55 ON Compliant with standards: IEC/EN , IEC/EN , UL508, UL98, CSA C22.2. Type 1 phase 3 phase General Short- Fuse class - [HP] [HP] use at circuit max rating 600VAC rating at at 600V 600VAC 120V 240V V 480V 600V [A] [ka] Type - [A] 208V GA RK5-20A GA / /2 7 1 / RK5-30A GA RK5-35A GA RK5-45A GA063 SA / RK5-45A NOTE: Above ratings are valid for GA A, GA C and GA D (on page -24) types, according to UL508 and CSA 22.2 n 14. UL Listed for USA and Canada (culus - File E93602), as Manual Motor Controllers while UL designation is GENERAL PURPOSE SWITCH. INTERRUPTEUR USAGE GENERAL and SUITABLE AS MOTOR DISCONNECT. Type 1 phase 3 phase General Short- Max fuse [HP] [HP] use at circuit rating 600VAC rating at at 600V 600VAC 120V 240V V 480V 600V [A] [ka] [A] 208V❷ GA063...❶ / GA GA GA / NOTE: Above ratings are valid for GA A, GA C and GA D (on page -24) types, according to UL98 and CSA C22.2 N 4. UL Listed for USA and Canada (culus - File E328470), as Open Type Switches Open type unfused switch while UL designation is GENERAL PURPOSE SWITCH. INTERRUPTEUR USAGE GENERAL. ❶ Lower ratings in this same UL/CSA category are available on specific request for volume orders. For information, consult Customer Service; see contact details on inside front cover. ❷ Voltage value not considered in UL98 / CSA 22.2 n 4 standards so not indicated in UL product marking. -4 Add-on blocks/accessories pages -6 to 10 pages -26 to 28 page -50 page -53

5 GA series 16A to 125A Fourth pole add on GAX42...A GAX41...A GAX42 063SA GAX41 063SA GAX42 040C GAX41 040C Order code IEC conven- IEC rated Qty Wt tional free air operational per thermal current Ie❻ pkg current Ith AC21A❻ AC22A ( 690V) ( 690V) AC23A ( 415V) [A] [A] n [kg] Simultaneous closing operation as switch poles. For GA...A version. GAX42 040A❶ GAX42 063SA❷ GAX42 063A GAX42 080A GAX42 100A GAX42 125A For GA...C version. GAX42 040C❸ GAX42 063C GAX42 080C GAX42 100C GAX42 125C Early-make closing operation with respect to switch poles. For GA...A version. GAX41 040A❶ GAX41 063SA❷ GAX41 125A❹ For GA...C version. GAX41 040C❸ GAX41 125C❺ ❶ For GA016 A-GA040 A only. ❷ For GA063 SA only. ❸ For GA016 C-GA040 C only. ❹ For GA063 A-GA125 A only. ❺ For GA063 C-GA125 C only. ❻ See page -4 for UL/CSA ratings which are the same as the corresponding switch types. Strokes of GA poles (switch and add-on pole) General characteristics IEC 16A to 125A ratings Available version for: Direct operating Door mount Simultaneous closing with switch poles Early-make closing respect with switch poles Compact and modular size. Operational characteristics IEC rated insulation voltage Ui: 1000V IEC rated impulse withstand Uimp: 8kV Electrical life in IEC AC21A: 100,000 cycles for GAX42 040A/C and GAX41 040A/C 15,000 cycles for GAX42 063SA and GAX41 063SA 30,000 cycles for GAX42 063A/C and GAX41 125A/C Mechanical life: 100,000 cycles for GAX42 040A/C and GAX41 040A/C, GAX42 063SA and GAX41 063SA 30,000 cycles for GAX42 063A/C - GAX42 125A/C and GAX41 125A/C. Certifications obtained: EAC culus per UL508 / CSA C22.2 n 14 UL Listed (File E93602) culus per UL98 / CSA C22.2 n 4 UL Listed (File E328470) Type GAX41 040A-GAX42 040A GAX41 063SA-GAX42 063SA GAX41 040C-GAX42 040C GAX41 125A-GAX42 125C GAX42 063A...GAX42 125A GAX42 063C...GAX42 125C Certification obtained. Travel GA016A/C GA040A/C - GA063SA Main poles 60 GAX42040A/C - GAX42063SA Simultaneous fourth-pole add on 60 GAX41040A/C-GAX41063SA 55 Early-make fourth-pole add on Compliant with standards: IEC/EN , IEC/EN , UL508, UL98, CSA C22.2. GA063A/C GA125A/C Main poles GAX42063A/C GAX42125A/C Simultaneous fourth-pole add on GAX425A/C Early-make fourth-pole add on OFF ON Add-on blocks/accessories pages -6 to 10 pages -26 to 28 page -50 page -53-5

6 GA series 16A to 125A Add-on blocks and accessories Maximum combination GA016 A...GA040 A GA040 D Sequence and maximum combination of add-on blocks on direct operating switch disconnectors GA063 SA GAX31 A GAX33 A GAX10A GAX 10EA GAX41 040A GAX41 040A GAX 10EA GAX10A GAX33 A GAX31 A GAX42 040A GAX42 040A GAX42 040D❶ GAX42 040D❶ GA016 A GA025 A GA032 A GA040 A GA040 D❶ ❶ GAX42 040D can be used with GA040 D switch only. GAX31 A GAX33 A GAX10A GAX 10EA GAX41 063SA GAX41 063SA GAX 10EA GAX10A GAX33 A GAX31 A GAX42 063SA GAX42 063SA GA063 SA GA063 A...GA125 A GA080 D, GA125 D GAX32 A GAX34 A GAX10A GAX12 10EA GAX41 125A GAX41 125A GAX12 10EA GAX10A GAX34 A GAX32 A GAX42...A GAX42...A GA D❷ GA D❷ GA D❸ GA D❸ GA063 A GA080 A GA100 A GA125 A GA080 D❷ GA125 D❸ ❷ GAX42 080D can be used with GA080 D switch only. ❸ GAX42 125D can be used with GA125 D switch only. GA016 C...GA040 C Sequence and maximum combination of add-on blocks on door mount switch disconnectors GAX31 C GAX33 C GAX10C GAX41 040C GAX41 040C GAX10C GAX33 C GAX31 C GAX42 040C GAX42 040C GA016 C GA025 C GA032 C GA040 C GA063 C...GA125 C GAX32 C GAX34 C GAX10C GAX41 125C GAX41 125C GAX10C GAX34 C GAX32 C GAX42 125C GAX42 125C GA063 C GA080 C 1 1 GA100 C GA125 C Add-on blocks/accessories pages -6 to 10 pages -26 to 28 page -50 pages -53

7 GA series 16A to 125A Add-on blocks and accessories GA016 A...GA040 A GA040 D + GAX GAX60 00 Sequence and maximum combination for mechanical coupling and mechanical interlock for line changeover GAX31 A GAX33 A GAX10A GAX 10EA GAX41 040A GAX41 040A GAX 10EA GAX10A GAX33 A GAX31 A GAX42 040A GAX42 040A GAX42 040D❶ GAX42 040D❶ GAX GAX GA016 A GA016 A GA025 A GA025 A GA032 A GA032 A GA040 A GA040 A GA040 D GA040 D ❶ ❶ GAX42 040D can be used with GA040 D switch only. GA063 SA + GAX GAX60 00 GAX31 A GAX33 A GAX10A GAX 10EA GAX41 063SA GAX41 063SA GAX 10EA GAX10A GAX33 A GAX31 A GAX42 063SA GAX42 063SA GAX GAX GA063SA GA063SA GA063 A...GA125 A GA080 D, GA125 D + GAX GAX60 01 GAX32 A GAX34 A GAX10A GAX12 10EA GAX41 125A GAX41 125A GAX12 10EA GAX10A GAX34 A GAX32 A GAX42...A GAX42...A GA D❷ GA D❷ GA D❸ GA D❸ GAX GAX GA063 A GA063 A GA080 A + GA080 A GA100 A GA100 A GA125 A + 2 GA125 A GA080 D + 2 GA080 D ❷ GA125 D GA125 D ❸ 1 1 ❷ GAX42 080D can be used with GA080 D switch only. ❸ GAX42 125D can be used with GA125 D switch only. Add-on blocks/accessories pages -6 to 10 pages -26 to 28 page -50 pages -53-7

8 Switch disconnectors GA series 16A to 125A Accessories Add-on blocks Order code Characteristics Qty Wt per pkg GAX10 A GAX 10EA GAX12 10EA GAX3...A GAX50... GAX60... GAX10 C GAX3...C Strokes of GA poles (switch with auxiliary contact blocks) Travel GA016A/C GA040A/C - GA063SA Main poles 60 GAX10 A GAX10 C 60 Auxiliary contacts (1NO+1NC) GAX 10EA Auxiliary contact (1EB NO early break) GA063A/C GA125A/C Main poles GAX10 A GAX10 C Auxiliary contacts (1NO+1NC) GAX12 10EA Auxiliary contact (1EB NO early break) NO NC NO NC OFF 40 Travel Travel Travel Travel n [kg] Auxiliary contacts, simultaneous operation as switch poles. GAX10 A 1NO+1NC for GA...A, GA063 SA and GA...D GAX10 C 1NO+1NC for GA...C Auxiliary contacts, early-break operation with respect to switch poles. GAX 10EA 1EB (NO) for GA016 A-GA040 A, GA063 SA and GA040 D GAX12 10EA 1EB (NO) for GA063 A-GA125 A, GA080 D and GA125 D Neutral terminal. GAX31 A For GA016 A-GA040 A, GA063 SA and GA040D GAX32 A For GA063 A-GA125 A and GA080 D - GA125 D GAX31 C For GA016 C-GA040 C GAX32 C For GA063 C-GA125 C Earth/Ground terminal. GAX33 A For GA016 A-GA040 A, GA063 SA and GA...D GAX34 A For GA063 A-GA125 A and GA080 D - GA125 D GAX33 C For GA016 C-GA040 C GAX34 C For GA063 C-GA125 C Mechanical interlock for line changeover (I-0-II). GAX50 00 For GA016 A-GA040 A, GA063 SA, GA...D and GAX67 B; 5mm/0.2 ❶ GAX50 01 For GA063 A-GA125 A, GA080 D GA125 D and GAX67 B; 5mm/0.2 ❶ Mechanical coupling system for 6-8 pole switch disconnectors. GAX60 00 For GA016 A-GA040 A, GA063 SA and GA...D; 5mm/0.2 ❶ GAX60 01 For GA063 A-GA125 A, GA080 D, GA125 D; 7mm/0.3 ❷ ❶ Use GAX7 shaft extensions. ❷ Use GAX66.. handles and GAX7 A extensions for a door-coupling version. ON Strokes of GA D types (switch and add-on blocks) Travel GA040 D 60 Main poles GA D 60 Simultaneous fourth-pole add on GAX10 A Auxiliary contacts (1NO+1NC) GAX 10EA Auxiliary contact (1EB NO early break) GA080 D - GA125 D Main poles GAX42 080D - GAX42 125D Simultaneous fourth-pole add on GAX10 A GAX10 C Auxiliary contacts (1NO+1NC) GAX12 10EA Auxiliary contact (1EB NO early break) NO NC NO NC Travel Travel Travel Travel Operational characteristics of auxiliary contacts IEC conventional free air thermal current Ith: 10A UL/CSA and IEC/EN designation: A600-Q600 Tightening torque: 0.8Nm/7.1lbin. Operational characteristics for other devices Tightening torque: GAX31A/C-GAX33A/C terminals: 1.8-2Nm/16-18lbin GAX32A/C-GAX34A/C terminals: 5-6Nm/45-54lbin GAX5000/5001-GAX6000/6001 fixing: 0.5Nm/4.4lbin; extension with handle: 0.8Nm/7.1lbin. Transformation of direct operating version into door coupling type GA063 A-GA125 A + GA063 A-GA124 A / GA080 D + GA080 D / GA125 D + GA125 D with GAX50 01 for line changeover GAX7... ( 5mm/02in) Certifications obtained: GA016 A-GA040 A + GA016 A-GA040A / GA063 SA + GA063 SA / GA040 D + GA040 D with GAX50 00 for line changeover Type GAX10 A - GAX10 C ❸ GAX 10EA ❸ GAX12 10EA ❸ GAX31 A GAX31 C GAX32 A GAX32 C GAX33 A GAX33 C GAX34 A GAX34 C GAX50 00 GAX60 00 GAX50 01 GAX60 01 GAX61-GAX61 B GAX62-GAX62 B GAX63-GAX63 B GAX63 1B GAX63 2-GAX63 2B GAX64-GAX64 B GAX66-GAX66 B GAX67 B GAX60 B Certification obtained. ❸ UL Listed - culus File E EAC culus per UL508 / CSA C22.2 n 14 UL Listed (File E93602) 0 GAX67 B culus per UL98 / CSA C22.2 n 4 UL Listed (File E328470) NOTE: GAX61/61B and GAX66/66B are UL/CSA Type 1, 4, 4X outdoor use with all GA switch types. GAX62/62B, GAX63/63B, GAX632/2B, GAX64/64B and GAX67B are UL/CSA Type 1, 4, 4X outdoor use with GA016A/C-GA040A/C and GA063SA types, otherwise Type 1 only. Compliant with standards: IEC/EN , IEC/EN , IEC/EN , UL508, UL98, CSA C22.2. I 0 I OFF ON -8 Add-on blocks/accessories pages -6 to 10 pages -26 to 28 page -50

9 GA series 16A to 125A Accessories Rotary handles Order code Characteristics Qty Wt per pkg GAX61 GAX62 GAX66 GAX63 B GAX63 2B Low profile GAX67 B ❶ For GA...A and GA...D switch disconnectors, separately purchase GAX7... shaft extensions. ❷ Snap-on fixing of GA016-GA040C switch disconnectors with the handle. ❸ Separately purchase GAX7 A shaft extension and GAX60 B handle having a 7mm/0.3 square section, nor required for GAX n [kg] DOOR COUPLING HANDLES, PADLOCKABLE. Red/yellow, rotating. GAX61 For GA...A, GA063 SA, GA...C and GA...D. Screw fixing. Recessed selector. 5mm/0.2 ❶. IEC IP65/UL Type 4X GAX62 For GA...A, GA063 SA, GA...C and GA...D. Screw fixing. Protruding selector. 5mm/0.2 ❶. IEC IP65/UL Type 4X GAX63 For GA...A, GA063 SA, GA016 C - GA040 C and GA...D. Ring fixing. Protruding selector. 5mm/0.2 ❶❷. IEC IP65/UL Type 4X GAX63 2 For GA...A, GA063 SA, and GA...D. Low-profile ring fixing. Protruding selector. 5mm/0.2 ❶. IEC IP65/UL Type 4X GAX64 For GA...A, GA063 SA, and GA...D. Ring fixing. Protruding selector with release, defeatable per UL508A; 5mm/0.2 ❶. IEC IP65/UL Type 4X GAX66 For GA063 A-GA125 A, GA080 D, GA125 D and GAX Screw fixing. Pistol grip with release, defeatable per UL508A; 7mm/0.3 ❸. IEC IP66/UL Type 4X Black, rotating. GAX61 B For GA...A, GA063 SA, GA...C and GA...D. Screw fixing. Recessed selector. 5mm/0.2 ❶. IEC IP65/UL Type 4X GAX62 B For GA...A, GA063 SA, GA...C and GA...D, Screw fixing. Protruding selector. 5mm/0.2 ❶. IEC IP65/UL Type 4X GAX63 B For GA...A, GA063 SA, GA016 C - GA040 C and GA...D. Ring fixing. Protruding selector. 5mm/0.2 ❶❷. IEC IP65/UL Type 4X GAX63 1B For GA A, GA063 SA, GA016 C-GA040 C and GA D. Ring fixing. Protruding selector, padlockable at ON (per UNI 9490 and UNI EN firefighting systems); 5mm/0.2 ❶❷. IEC IP65/UL Type 4X GAX63 2B For GA...A, GA063 SA and GA...D Low-profile ring fixing. Protruding selector. 5mm/0.2 ❶. IEC IP65/UL Type 4X GAX64 B For GA...A, GA063 SA and GA...D Ring fixing. Protruding selector with release, defeatable per UL508A. 5mm/0.2 ❶. IEC IP65/UL Type 4X GAX66 B For GA063 A-GA125 A and GA080 D-GA125 D and GAX Screw fixing. Pistol grip with release, defeatable per UL508A; 7mm/0.3 ❶. IEC IP66/UL Type 4X GAX67 B For GAX50... mechanical interlock mechanism (I-O-II). 5mm/0.2 ❶. IEC IP65/UL Type 4X ACCESSORIES FOR DOOR COUPLING CONTROL. For GAX66 and GAX66 B handles. GAX60 B Adapter 7mm/0.3 for GA063 A-GA125 A, GA080 D and GA125 D pages -26 to 28 Operational characteristics Choice of handle fixing: ring or screw Fixing handle interaxis: 36x36mm/1.4x1.4 or 48x48mm/1.9x1.9 for GAX61/61B-GAX62/62B- GAX67B; 36x36mm/1.4x1.4 for GAX66/66B Compatible with pre-existing drillings of most common types on marketplace 1 to 3 padlocks (Ø4-8mm/Ø ) for all handles Tightening torque: Fixing ring types: 2.3Nm/20.4lbin GAX60B: 0.8Nm/7lbin GAX66/66B: 1.5Nm/13.3lbin All others: 1Nm/9lbin Degree of protection: IEC/EN IP65 for all except GAX66/66B with IP66; for UL/CSA ratings, see note details on page -8. Transformation of direct operating version into door coupling type GA080 D GA125 D GA...A - GA063 SA GA...D GAX7... ( Door-mount version GA063 C - GA125 C GAX60 B 5mm/0.2in) (GAX63/63B) (GAX63 1B) GA016 C - GA040 C (GAX64/64B) GAX61/61B GA080 D + GA080 D / GA125 D + GA125 D with GAX60 01 for 6 and 8 poles GAX7150A GAX7200A GAX7300A ( 7mm/0.3 ) GA016 C - GA040 C See the table on page -8 for details. GAX62/62B GAX62/62B GAX63/63B GAX63 1B GAX63 2/2B GAX64/64B GAX66 GAX66 B GAX63/63B GAX63 1B GAX61/61B -9

10 GA series 16A to 125A Accessories Shaft extensions Terminal covers Fuse holders/blocks GAX7... GAX7... A GAX8... GAX39 1 Order code Characteristics Qty Wt per pkg n [kg] Shaft extension for door-coupling handles GAX61-GAX64, GAX61 B-GAX64 B, GAX67 B and mechanical interlock type GAX50 00, GAX50 01 and coupling system GAX GAX mm long; 5mm/ ,012 GAX mm long; 5mm/ GAX mm long; 5mm/ GAX mm long; 5mm/ GAX mm long; 5mm/ GAX mm long; 5mm/ GAX mm long; 5mm/ GAX mm long; 5mm/ Shaft extension for door-coupling handles GAX66, GAX66 B and mechanical coupling system GAX GAX7 150A 150mm long; 7mm/ GAX7 200A 200mm long; 7mm/ GAX7 300A 300mm long; 7mm/ Set of 2 one-pole terminal covers for fourth pole. GAX81 For GAX42 040A, GAX42 040C GAX42 040D, GAX41 040A, GAX41 040C, GAX41 063SA, GAX42 063SA GAX82 For GAX42 063A-GAX42 125A, GAX42 063C-GAX42 125C, GAX42 080D, GAX42 125D, GAX41 125A, GAX41 125C Set of 2 three-pole terminal covers. GAX83 For GA016 A-GA040 A, GA063 SA, GA016 C-GA040 C, GA040 D GAX84 For GA063 A-GA125 A, GA063 C-GA125 C, GA080 D, GA125 D Fuse holder/block for switch disconnectors. GAX39 1 For GA016 A-GA032 A Suitable for 10.3x38 fuse size GAX39 1UL For GA016 A-GA025 A Suitable for Class CC fuses Operational characteristics of fuse holder IEC rated insulation voltage Ui: 1000V IEC rated impulse withstand voltage Uimp: 8kV The fuse holder/block connects directly to the switch disconnectors. Access to fuses only when the switch disconnectors are in OFF position. Terminal covers For switch disconnectors GA...A GA063 SA GA...D GAX83 GAX84 For fourth pole GAX41...A GAX41 063SA GAX42...A GAX42 063SA GAX42...D GAX81 GAX82 Certifications obtained: GAX83 GAX84 GA...C GAX81 GAX82 GAX41...C GAX42...C EAC culus per UL508 / CSA C22.2 n 14 UL Listed (File E93602) culus per UL98 / CSA C22.2 n 4 UL Listed (File E328470) Type GAX7 055 GAX7 500 GAX7 150A GAX7 300A GAX81-GAX83 GAX82-GAX84 GAX39 1 GAX39 1UL Certification obtained. Compliant with standards: IEC/EN , IEC/EN , UL508, UL98, CSA C pages -26 to 28 page -50

11 GA series 16A to 125A Empty non-metallic enclosures IEC/EN type IP65 GAZ1 Order code Description Qty Wt per pkg n [kg] For switch disconnectors. With rotating red/yellow handle. Complete with shaft extension. GAZ1 For GA016 A-GA040 A and GA040 D GAZ2 For GA063 SA, GA063 A-GA100 A and GA080 D GAZ3 For GA125 A and GA125 D With rotating black handle. Complete with shaft extension. GAZ1 B For GA016 A-GA040 A and GA040 D GAZ2 B For GA063 SA, GA063 A-GA100 A and GA080 D GAZ3 B For GA125 A and GA125 D General characteristics Enclosure material: ABS Padlockable handle Sealable cover For GAZ3/3B if any earth/ground and/or neutral terminal required, separately purchase types GAX3 given on page -8 Tightening torque for cover screws: GAZ1/1B: 1.3Nm/16lbin Other types: 1.5Nm/13lbin IEC/EN degree of protection: IP65 Cable entry: GAZ1/1B: PG16/M25 and PG13.5/M20 knockouts GAX2/2B: PG29/M32 and PG16/M25 knockouts GAZ3/3B: Smooth surfaces; can be drilled by customer. Certifications obtained: EAC. Compliant with standards: IEC/EN , IEC/EN GAZ2 The empty enclosures are supplied with the following accessories: Enclosure GAZ1 GAZ2 GAZ3 GAZ1B GAZ2B GAZ3B Red/yellow handle GAX61 GAX61 GAX61 Black handle GAX61B GAX61B GAX61B Extension Neutral plate terminal Earth/Ground plate terminal GAZ3 UL/CSA Type 4/4X GAZ1 UL GAZ2 UL Order code Description Qty Wt per pkg n [kg] For switch disconnectors. With rotating red/yellow handle. Complete with shaft extension. GAZ1 UL For GA016 A-GA040 A and GA040D GAZ2 UL For GA063 SA and GA063 A GAZ3 UL For GA80 A-GA125 A, GA080 D and GA125 D With rotating black handle. Complete with shaft extension. GAZ1 B UL For GA016 A-GA040 A and GA040D GAZ2 B UL For GA063 SA and GA063 A GAZ3 B UL For GA80 A-GA125 A, GA080 D and GA125 D The empty enclosures are supplied with the following accessories: Enclosure GAZ1UL GAZ2UL GAZ3UL GAZ1BUL GAZ2BUL GAX3BUL Red/yellow handle GAX61 GAX61 GAX61 Black handle GAX61B GAX61B GAX61B Extension Neutral plate terminal Earth/Ground plate terminal General characteristics Enclosure material: Polycarbonate Padlockable handle Sealable cover Tightening torque for enclosure screws: GAZ1/1B UL: 1.3Nm/16lbin for cover; 1.2Nm/lbin for plate terminals Other types: 1.5Nm/13lbin for cover; 1.2Nm/lbin for plate terminals UL/CSA degree of protection: Type 1, 4 and 4X indoor use only for GAZ1 UL; not available for others / testing pending completion at time of catalogue printing Cable entry: GAZ1/1B UL: PG16/M25 and PG13.5/M20 knockouts GAX2/2B UL: PG29/M32 and PG16/M25 knockouts GAZ3/3B UL: Smooth surfaces; can be drilled by customer. Certifications obtained: EAC, UL Listed for USA and Canada (culus file E93602) as Polymeric Enclosures for Manual Motor Controllers; ccsaus pending for GAZ2/2B UL and GAZ3/3B UL at time of catalogue printing. Compliant with standards: IEC/EN , IEC/EN , UL508, CSA C22.2 n 14, UL98, CSA C22.2 n 4. GAZ3 UL page -28 page -50 -

12 GA series 16A to 125A Enclosed switch disconnectors IEC/EN type IP65 non-metallic enclosure GAZ016...GAZ GAZ C GAZ Order code IEC conventional free air thermal Qty Wt current Ith per AC21A ( 690V) pkg [A] n [kg] THREE POLE. With rotating red/yellow handle. GAZ GAZ GAZ GAZ GAZ063 SA GAZ063 C GAZ080 C GAZ100 C GAZ With rotating black handle. GAZ016 B GAZ025 B GAZ032 B GAZ040 B GAZ063 SAB GAZ063 CB GAZ080 CB GAZ100 CB GAZ125 B FOUR POLE. With rotating red/yellow handle. GAZ016 T GAZ032 T GAZ063 CT GAZ100 CT GAZ125 T With rotating black handle. GAZ016 T4B GAZ032 T4B GAZ063 CT4B GAZ100 CT4B GAZ125 T4B Components Enclosure Switch Handle disconnector GAZ1 GA016 A GAX61 GAZ1 GA025 A GAX61 GAZ1 GA032 A GAX61 GAZ1 GA040 A GAX61 GAZ2 GA063 SA GAX61 GAZ2 GA063 A GAX61 GAZ2 GA080 A GAX61 GAZ2 GA100 A GAX61 GAZ3 GA125 A GAX61 GAZ1 B GA016 A GAX61 B GAZ1 B GA025 A GAX61 B GAZ1 B GA032 A GAX61 B GAZ1 B GA040 A GAX61 B GAZ2 B GA063 SA GAX61 B GAZ2 B GA063 A GAX61 B GAZ2 B GA080 A GAX61 B GAZ2 B GA100 A GAX61 B GAZ3 B GA125 A GAX61 B Enclosure Switch Fourth Handle disconnector pole GAZ1 GA016 A GAX42040A GAX61 GAZ1 GA032 A GAX42040A GAX61 GAZ2 GA063 A GAX42063A GAX61 GAZ2 GA100 A GAX42100A GAX61 GAZ3 GA125 A GAX42125A GAX61 GAZ1 B GA016 A GAX42040A GAX61 B GAZ1 B GA032 A GAX42040A GAX61 B GAZ2 B GA063 A GAX42063A GAX61 B GAZ2 B GA100 A GAX42100A GAX61 B GAZ3 B GA125 A GAX42125A GAX61 B General characteristics Enclosure material: ABS For four-pole types not indicated, separately purchase corresponding fourth pole GAX42 A and install on enclosed 3-pole version Possible accessories to mount afterwards, if any required: GAZ016-GAZ040 types: 1 contact block both on the right and left disconnector side unless 4th pole is installed All other types: 2 contact blocks both on the right and left disconnector side unless 4th pole is installed For GAZ125 types: if any earth/ground and/or neutral terminal required, separately purchase types GAX3 given on page -8 Padlockable handle Sealable cover Tightening torque for cover screws: GAZ016-GAZ040 types: 1.3Nm/16lbin All other types: 1.5Nm/13lbin IEC/EN degree of protection: IP65 Cable entry: GAZ016-GAZ040 types: PG16/M25 and PG13.5/M20 knockouts GAZ063SA-GAZ100 types: PG29/M32 and PG16/M25 knockouts GAZ125 types: Smooth surfaces; can be drilled by customer. Certifications obtained: EAC. Compliant with standards: IEC7EN , IEC/EN page -28 page -50 page -53

13 GA series 16A to 125A Enclosed switch disconnectors UL/CSA Type 4/4X non-metallic enclosure GAZ016...GAZ040...UL GAZ063 SAB UL GAZ063 CB UL GAZ100 UL - GAZ125 UL Order code Description Qty Wt per pkg n [kg] THREE POLE. With rotating red/yellow handle. GAZ016 UL GAZ025 UL GAZ032 UL GAZ040 UL GAZ063 SA UL GAZ063 CUL GAZ080 UL GAZ100 UL GAZ125 UL With rotating black handle. GAZ016 BUL GAZ025 BUL GAZ032 BUL GAZ040 BUL GAZ063 SAB UL GAZ063 CB UL GAZ080 B UL GAZ100 B UL GAZ125 B UL FOUR POLE. With rotating red/yellow handle. GAZ016 T4 UL GAZ032 T4 UL GAZ063 CT4 UL GAZ100 T4 UL GAZ125 T4 UL With rotating black handle. GAZ016 T4B UL GAZ032 T4B UL GAZ063 CT4B UL GAZ100 T4B UL GAZ125 T4B UL Components Enclosure Switch Handle disconnector GAZ1 UL GA016 A GAX61 GAZ1 UL GA025 A GAX61 GAZ1 UL GA032 A GAX61 GAZ1 UL GA040 A GAX61 GAZ2 UL GA063 SA GAX61 GAZ2 UL GA063 A GAX61 GAZ3 UL GA080 A GAX61 GAZ3 UL GA100 A GAX61 GAZ3 UL GA125 A GAX61 GAZ1 B UL GA016 A GAX61 B GAZ1 B UL GA025 A GAX61 B GAZ1 B UL GA032 A GAX61 B GAZ1 B UL GA040 A GAX61 B GAZ2 B UL GA063 SA GAX61 B GAZ2 B UL GA063 A GAX61 B GAZ3 B UL GA080 A GAX61 B GAZ3 B UL GA100 A GAX61 B GAZ3 B UL GA125 A GAX61 B Enclosure Switch Fourth Handle disconnector pole GAZ1 UL GA016 A GAX42040A GAX61 GAZ1 UL GA032 A GAX42040A GAX61 GAZ2 UL GA063 A GAX42063A GAX61 GAZ3 UL GA100 A GAX42100A GAX61 GAZ3 UL GA125 A GAX42125A GAX61 GAZ1 B UL GA016 A GAX42040A GAX61 B GAZ1 B UL GA032 A GAX42040A GAX61 B GAZ2 B UL GA063 A GAX42063A GAX61 B GAZ3 B UL GA100 A GAX42100A GAX61 B GAZ3 B UL GA125 A GAX42125A GAX61 B UL/CSA ratings Type 1 phase 3 phase General Short- Fuse class - [HP] [HP] use at circuit max rating 600VAC rating at at 600V 600VAC 120V 240V V 480V 600V [A] [ka] Type - [A] 208V GAZ RK5-20A GAZ / /2 7 1 / RK5-30A GAZ RK5-35A GAZ RK5-45A GAZ063S / RK5-45A NOTE: Above ratings are valid for GAZ016 - GAZ063S...UL types, according to UL508 and CSA 22.2 n 14. UL Listed for USA and Canada (culus - File E93602), as Manual Motor Controllers while UL designation is GENERAL PURPOSE SWITCH. INTERRUPTEUR USAGE GENERAL and SUITABLE AS MOTOR DISCONNECT ; GAZ063S... pending. Type 1 phase 3 phase General Short- Max fuse [HP] [HP] use at circuit rating 600VAC rating at at 600V 600VAC 120V 240V V 480V 600V [A] [ka] [A] ❶ 208V❷ GAZ063C / GAZ GAZ GAZ / NOTE: Above ratings are valid for GAZ063C - GAZ types, according to UL98 and CSA C22.2 n 4. For indication and reference purposes only while ccsaus is pending. ❶ Lower ratings in this same UL/CSA category are available on specific request for volume orders. For information, consult Customer Service; see contact details on inside front cover. ❷ Voltage value not considered in UL98 / CSA 22.2 n 4 standards. General characteristics Enclosure material: Polycarbonate For four-pole types not indicated, separately purchase corresponding fourth pole GAX42 A and install on enclosed 3-pole UL-suffix version Possible accessories to mount afterwards, if any required: GAZ UL types: 1 contact block on both the right and left disconnector side unless 4th pole is installed All other types: 2 contact blocks both on the right and left disconnector side unless 4th pole is installed Padlockable handle Sealable cover Tightening torque for enclosure screws: GAZ UL: 1.3Nm/16lbin for cover; 1.2Nm/lbin for plate terminals Other types: 1.5Nm/13lbin for cover; 1.2Nm/lbin for plate terminals UL/CSA degree of protection: Type 1, 4 and 4X indoor use only for GAZ UL types; not available for others / testing pending completion at time of catalogue printing Cable entry: GAZ UL: PG16/M25 and PG13.5/M20 knockouts GAX063 UL: PG29/M32 and PG16/M25 knockouts GAZ UL: Smooth surfaces; can be drilled by customer. Certifications obtained: EAC, UL Listed for USA and Canada (culus file E93602), as Manual Motor Controllers Enclosed for GAZ UL types; ccsaus pending for all others at time of catalogue printing. Compliant with standards: IEC/EN , IEC/EN ; UL508 and CSA C22.2 n 14 up to GAZ063S ; UL98 and CSA C22.2 n 4 for all others. page -28 page -50 page

14 Switch disconnectors GA series 16A to 125A Enclosed changeover switches UL/CSA Type 4/4X non-metallic enclosure GAZ 025 E...GAZ 063SA E... GAZ 080 E... GAZ 125 E... UL/CSA ratings Order code IEC conven- IEC rated Qty Wt tional free air operational per thermal current Ie pkg current Ith AC21A AC22A AC23B ( 690V) ( 400V) ( 500V) [A] [A] [A] n [kg] Three-pole line changeover switches I-0-II. GAZ025 ET GAZ040 ET GAZ063SA ET GAZ080 ET GAZ125 ET Four-pole line changeover switches I-0-II. GAZ025 ET GAZ040 ET GAZ063SA ET GAZ080 ET GAZ125 ET Type 1 phase 3 phase General Short- Fuse class - [HP] [HP] use at circuit max rating 600VAC rating at at 600V 600VAC 120V 240V V 480V 600V [A] [ka] Type - [A] 208V GAZ / /2 7 1 / RK5-30A GAZ RK5-45A GAZ063S / RK5-45A NOTE: Above ratings are valid for GAZ025-GAZ040ET... types, according to UL508 and CSA 22.2 n 14. For indication and references purposes only while ccsaus is pending. Type 1 phase 3 phase General Short- Max fuse [HP] [HP] use at circuit rating 600VAC rating at at 600V 600VAC 120V 240V V 480V 600V [A] [ka] [A] 208V❶ GA GA / NOTE: Above ratings are valid for GAZ080-GAZ125ET... types, according to UL98 and CSA C22.2 N 4. For indication and references purposes only while ccsaus is pending. ❶ Voltage value not considered in UL98 / CSA 22.2 n 4 standards so not indicated in UL product marking. Components Enclosure 3-pole switch Interlock Handle disconnector GAZ UL❶ 2x GA025A GAX5000 GAX67 B GAZ UL❶ 2x GA040A GAX5000 GAX67 B GAZ UL❶ 2x GA063SA GAX5000 GAX67 B GAZ3UL 2x GA080A GAX5001 GAX67 B GAZ3UL 2x GA125A GAX5001 GAX67 B Enclosure Switch Interlock Handle disconnector + 4th pole GAZ UL❶ 2x GA025A + GAX5000 GAX67 B 2x GAX42040A GAZ UL❶ 2x GA040A+ GAX5000 GAX67 B 2x GAX42040A GAZ UL❶ 2x GA063SA+ GAX5000 GAX67 B 2x GAX42063SA GAZ3UL 2x GA080A+ GAX5001 GAX67 B 2x GAX42080A GAZ3UL 2x GA125A+ GAX5001 GAX67 B 2x GAX42125A ❶ For major details, consult Customer Service; see contact details on inside front cover. General characteristics Enclosure material: Polycarbonate Possible accessories to mount afterwards, if any required: 2 contact blocks both on the right and left side for GAZ ET6 types 1 contact block both on the right and left side for GAZ ET8 types Complete with neutral and earth/ground plate terminals Sealable cover Padlockable handle, complete with shaft extension Tightening torque for enclosure screws: 1.5Nm/13lbin for cover 1.2Nm/lbin for plate terminals Degree of protection: IEC/EN IP65; UL/CSA Type 1, 4 and 4X indoor use only Cable entry: GAZ ET6/8: PG29/M32 and PG16/M25 knockouts GAZ ET6/8: Smooth surfaces; can be drilled by customer. Certifications pending: EAC, ccsaus. Compliant with standards: IEC/EN , IEC/EN ; CSA C22.2 n 14 and UL508 up to GAZ063 ET6/8; CSA C22.2 n 4 and UL98 for GAZ ET6/8-14 page -29 page -50 pages -53

15 GA series 16A to 125A Maximum combination Enclosures GAX10 A GAX10 A GAX42 063SA GAX41 063SA or GAX 10EA GAX81 GAX42 040A GAX41 040A GAX42 040D or GAX 10EA GAX83 GAX81 GAX83 GAZ016...GAZ040 GAZ016 B...GAZ040 B GAZ1 GAZ1 B GAZ063 SA GAZ063 SAB GAZ2 GAZ2 B Two auxiliary contacts blocks can be fitted both on the right and left sides of the disconnector unless the fourth pole is installed. Earth/ground and neutral plate terminals are standard supplied on the enclosure base. Sealing eyelet One auxiliary contact block can be fitted on the right and left sides of the disconnector unless the fourth pole is installed. The earth and neutral plate terminals are standard supplied on the enclosure base. GAX12 10EA or GAX12 10EA or GAX34A GAX10 A GAX32A GAX34A GAX10 A GAX32A GAX41 125A GAX42 063A... GAX42 125A GAX42 080D GAX42 125D GAX83 GAX41 125A GAX42 125A GAX42 125D GAX83 GAX84 GAX84 GAZ063...GAZ100C GAZ063...GAZ100CB GAZ2 GAZ2 B GAZ125 GAZ125 B GAZ3 GAZ3 B Two auxiliary contact blocks can be fitted both on the right and left sides of the disconnector unless the fourth pole is installed. Earth/ground and neutral terminals, GAX... type, if any required, are to be purchased separately for the enclosure except for GAZ...UL types which have plate terminals standard supplied. page -28 page -50 pages

16 GE series 50A to 1600A Three-pole switch disconnectors GE... Order code IEC conven- IEC rated Qty Wt tional free air operational per thermal current Ie pkg current Ith AC21A AC23A AC23A ( 500V) ( 400V) ( 500V) [A] [A] [A] n [kg] Separately purchase the handle and shaft extension ❶. GE0160 P❹ GE GE GE ❺ GE GE GE GE GE GE GE GE GE Selection of handle and accessories Types of handle to use per type are given below. Also refer to pages -19 and -22 for other accessories. Direct operating Door coupling Black Black Red/yellow GEX65D GAX66B GAX66 GEX66ND GEX66NB GEX66N GEX67ND GEX67NB GEX67N GEX68ND GEX68NB GEX68N Three-pole switch disconnectors with fuse holder GE... F - GE...N - GE...B With NFC fuse holder ❸❹. Separately purchase the handle and shaft extension ❶❷. GE0050 F❹ GE0125 F❹ With NH fuse holder ❸. Separately purchase the handle and shaft extension❶❷. GE0160 N GE0161 N GE0250 N GE0400 N GE0630 N GE0800 N With BS fuse holder ❸. Separately purchase the handle and shaft extension❶❷. GE0160 B GE0200 B GE0250 B GE0315 B GE0400 B GE0630 B GE0800 B ❶ Refer to the side table for the selection of the handle. A shaft insert is standard-supplied with all direct operating handles so no other shaft extension is required in this case. ❷ See table on page -22 also for the types of fuses. ❸ The switch disconnector is standard-supplied with fuse protection shield. ❹ Standard supplied with IEC IP20 terminal protection. ❺ IEC 250A Ith; IEC 200A AC21A 500V. Direct operating Door coupling Black Black Red/yellow GEX61D GEX61NB GEX61N Direct operating Door coupling Black Black Red/yellow GEX61D GEX61NB GEX61N GEX62D GEX66NB GEX66N GEX63D GEX67NB GEX67N GEX64D GEX68NB GEX68N Direct operating Door coupling Black Black Red/yellow GEX62D GEX66NB GEX66N GEX63D GEX67NB GEX67N GEX64D GEX68NB GEX68N General characteristics IEC 50A to 1600A ratings Available versions: direct operating and door coupling Screw fixing: 35mm DIN rail mount adapter kit for GE0160 P on p. -19 Padlockable at 0 position with no extra accessory. Operational characteristics IEC rated insulation voltage Ui: 1000V for GE0160 P, GE0160-GE1600, GE0250 N/B-GE0800 N/B 800V for GE0050 F, GE0125 F, GE0160 N/B, GE0161 N, and GE0200 B Mechanical life: 30,000 cycles for GE0160 P, GE0160-GE0250, 20,000 cycles for GE0251-GE ,000 cycles for GE0500-GE1600, GE0050 F, GE0125 F, GE0160 N/B-GE0400 N/B 5,000 cycles for GE0630 N/B-GE0800 N/B. Certificatons obtained: EAC. Compliant with standards: IEC/EN , IEC/EN Add-on blocks/accessories pages -19 to 22 pages -30 to 42 page -51 pages -54 and 56

17 GE series 50A to 1600A Four-pole switch disconnectors GE...T4... Order code IEC conven- IEC rated Qty Wt tional free air operational per thermal current Ie pkg current Ith AC21A AC23A AC23A ( 500V) ( 400V) ( 500V) [A] [A] [A] n [kg] Separately purchase the handle and shaft extension ❶. GE0160 T4P❹ GE0160 T GE0200 T GE0250 T4 250❺ GE0251 T GE0315 T GE0400 T GE0500 T GE0630 T GE0800 T GE1000 T GE1250 T GE1600 T Selection of handles and accessories Types of handle to use per type are given below. Also refer to pages -19 and -23 for other accessories. Direct operating Door coupling Black Black Red/yellow GEX65D GAX66B GAX66 GEX66ND GEX66NB GEX66N GEX67ND GEX67NB GEX67N GEX68ND GEX68NB GEX68N Four-pole switch disconnectors with fuse holder GE... FT4 - GE...NT4-GE...BT4 With NFC fuse holder ❸❹. Separately purchase the handle and shaft extension ❶❷. GE0050 FT4❹ GE0125 FT4❹ With NH fuse holder ❸. Separately purchase the handle and shaft extension ❶❷. GE0160 NT GE0161 NT GE0250 NT GE0400 NT GE0630 NT GE0800 NT With BS fuse holder ❸. Separately purchase the handle and shaft extension❶❷. GE0160 BT GE0200 BT GE0250 BT GE0315 BT GE0400 BT GE0630 BT GE0800 BT Direct actuator Door coupling Black Black Red/yellow GEX61D GEX61NB GEX61N Direct actuator Door coupling Black Black Red/yellow GEX61D GEX61NB GEX61N GEX62D GEX66NB GEX66N GEX63D GEX67NB GEX67N GEX64D GEX68NB GEX68N Direct actuator Door coupling Black Black Red/yellow GEX62D GEX66NB GEX66N GEX63D GEX67NB GEX67N GEX64D GEX68NB GEX68N ❶ Refer to the side table for the selection of the handle. A shaft insert is standard-supplied with all direct operating handles so no other shaft extension is required in this case. ❷ See table on page -23 also for the types of fuses. ❸ The switch disconnector is standard-supplied with fuse protection shield. ❹ Standard supplied with IEC IP20 terminal protection. ❺ IEC 250A Ith; IEC 200A AC21A 500V. General characteristics IEC 50A to 1600A ratings 4-pole types (3P+N) with early-make late-break neutral pole Available versions: direct operating and door coupling Screw fixing: 35mm DIN rail mount adapter kit for GE0160 T4P on p. -19 Padlockable at 0 position with no extra accessory. Operational characteristics IEC rated insulation voltage Ui: 1000V for GE1600 T4P, GE0160 T4-GE1600 T4, GE0250 NT4/BT4-GE0800 NT4/BT4 800V for GE0050 FT4, GE0125 FT4, GE0160 NT4/BT4, GE0161 NT, GE0200 BT4 Mechanical life: 30,000 cycles for GE1600 T4P, GE0160 T4- GE0250 T4 20,000 cycles for GE0251 T4-GE0400 T4 10,000 cycles for GE0500 T4-GE1600 T4, GE0050 FT4, GE0125 FT4, GE0160 NT4/BT4-GE0400 NT4/BT4 5,000 cycles for GE0630 NT4/BT4, GE0800 NT4/BT4. Certifications obtained: EAC. Compliant with standards: IEC/EN , IEC/EN Add-on blocks/accessories pages -19 to 23 pages -30 to 42 page -51 pages -54 and 56-17

18 GE series 50A to 1600A Changeover switches Three-pole changeover switches GE...E Order code IEC conven- IEC rated Qty Wt tional free air operational per thermal current Ie pkg current Ith AC21A AC23B AC23B ( 500V) ( 400V) ( 500V) [A] [A] [A] n [kg] Separately purchase the handle and shaft extension❶. GE0160 E GE0200 E GE0201 E GE0250 E GE0315 E GE0400 E GE0500 E GE0630 E GE0800 E GE1000 E GE1250 E GE1600 E Selection of handles and accessories Types of handle to use per type are given below. Also refer to pages -19 and -21 for other accessories. Direct actuator Black GEX61E GEX62NE GEX63NE GEX64NE Door coupling Black GEX61NC GEX62NC GEX63NC GEX64NC Four-pole changeover switches GE...ET4 Order code IEC conven- IEC rated Qty Wt tional free air operational per thermal current Ie pkg current Ith AC21A AC23B AC23B ( 500V) ( 400V) ( 500V) [A] [A] [A] n [kg] Separately purchase the handle and shaft extension❶. GE0160 ET GE0200 ET GE0201 ET GE0250 ET GE0315 ET ,500 GE0400 ET GE0500 ET GE0630 ET GE0800 ET GE1000 ET GE1250 ET GE1600 ET Selection of handles and accessories Types of handle to use per type are given below. Also refer to pages -19 and -21 for other accessories. Direct actuator Black GEX61E GEX62NE GEX63NE GEX64NE Door coupling Black GEX61NC GEX62NC GEX63NC GEX64NC ❶ Refer to the side table for the selection of the handle. A shaft insert is standard-supplied with all direct operating handles so no other shaft extension is required in this case. General characteristics IEC 160A to 1600A ratings 4-pole types (3P+N) with early-make late-break neutral pole Available versions: direct operating and door coupling Screw fixing Padlockable at 0 position with no extra accessory. Operational characteristics IEC rated insulation voltage Ui: 1000V Mechanical life: 30,000 cycles for GE0160 E/ET4 and GE0200 E/ET4 only; 10,000 cycles for other types. Certifications obtained: EAC. Compliant with standards: IEC/EN , IEC/EN Add-on blocks/accessories pages -19 to 21 pages -43 to 47 page -51 page -54 and 57

19 GE series 50A to 1600A Add-on blocks and accessories Auxiliary contacts Terminal covers Motorised unit GEX10... GEX89 00 GEX8... GEX69... For the correct choice of auxiliary contacts, terminals covers and motorised unit for the switch disconnector, refer to tables on pages -21 to -25. Order code Characteristics Qty Wt per pkg n [kg] Auxiliary contacts❶❷. GEX10 ❶❷ 1NO/1NC changeover/spdt Auxiliary contacts for switch disconnector types GE0050 F, GE0050 FT4, GE0125 F, GE0125 FT4, GE0160 N and GE0160 NT4. GEX10 N❷ 1NO/1NC changeover/spdt Auxiliary contacts for switch disconnector types GE0160 E, GE0200 E, GE0160 ET4, GE0200 ET4, GE1600 E and GE1600 ET4. GEX10 M❷ 1NO/1NC changeover/spdt Adapter kit for 35mm DIN fixing. GEX89 00 For GE...P types only Set of terminal covers consisting of pieces given below. See tables on pages -21 to -25 for the selection based on the switch disconnector type. Screw fixing. GEX piece set, transparent sheet covering four poles GEX81 2-piece set, each covers two poles GEX piece set, each covers two poles GEX piece set, each covers two poles GEX piece set, each covers two poles Snap-on fixing. GEX piece set, each covers one pole GEX piece set, each covers one pole GEX82 3-piece set, each covers one pole GEX piece set, each covers one pole GEX piece set, each covers one pole GEX piece set, each covers one pole GEX piece set, each covers one pole GEX piece set, each covers one pole GEX piece set, each covers one pole GEX piece set, each covers one pole GEX piece set, each covers one pole GEX83 3-piece set, each covers one pole GEX piece set, each covers one pole GEX piece set, each covers one pole GEX piece set, each covers one pole GEX piece set, each covers one pole GEX piece set, each covers one pole Motorised control unit for changeover switches. Rated auxiliary supply voltage 230VAC/DC. Complete with control handle, shaft extension and fixing elements. GEX69 1 For GE0201 E-GE0400 E and GE0201 ET4-GE0400 ET4 GEX69 2 For GE0500 E-GE0800 E and GE0500 ET4-GE0800 ET4 GEX69 3 For GE1000 E-GE1600 E and GE1000 ET4-GE1600 ET4 ❶ Suitable for all types except switch disconnectors GE0050 F, GE0050 FT4, GE0125 F, GE0125 FT4, GE0160 N, GE0160 NT4, GE0160 E, GE0200 E, GE0160 ET4, GE0200 ET4, GE1600 E and GE1600 ET4. ❷ Changeover contact/spdt. Selection of add-on contacts and accessories Refer to the combinations given on pages -21 to -25 for a correct choice based on the switch disconnector type used. General characteristics for auxiliary contacts IEC conventional free air thermal current Ith: 16A. General characteristics for motorised control unit IEC rated auxiliary supply voltage: 230VAC/DC 4 static outputs, 24VDC 120mA total 4 inputs, contacts powered at 24VDC or 5VDC (500mA) for changeover control (pulsed or continuous) RS485 Modbus serial port for control, monitoring, programming Padlockable at 0 position Programming by position inputs 4-digit display for status-error indications. Certifications obtained: EAC. Compliant with standards: IEC/EN , IEC/EN pages -43 to 49 page

20 GE series 50A to 1600A Accessories GEX...D-GEX...E GEX6 2NE GAX66 GEX6 6N GEX6 8N GEX6 7NB GAX7...A GEX7... For the correct choice of handle and shaft extension for the switch disconnector, refer to tables on pages -21 to -25. Order code Characteristics Qty Wt per pkg n [kg] DIRECT OPERATING LEVER HANDLE, PADLOCKABLE ❶. Rotating type with screw fixing on switch disconnector. Complete with shaft insert. GEX6 1D 95mm/3.7 black GEX6 1E 50mm/2 black GEX6 2D 105mm/4.1 black GEX6 2NE 143mm/5.6 black GEX6 3D 145mm/5.7 black GEX6 3NE 360mm/14.2 black GEX6 4D 360mm/14.2 black GEX6 4NE 396mm/15.6 black GEX6 5D 50mm/2 black GEX6 6ND 5mm/4.5 black GEX6 7ND 143mm/5.6 black GEX6 8ND 396mm/15.6 black DOOR COUPLING LEVER HANDLE, PADLOCKABLE ❶. Red/yellow rotating type with screw fixing on door. Shaft extension to order separately. GAX66❷ Pistrol grip, 65mm/ mm/0.3 ❷. IEC IP66 GEX6 1N 94mm/3.7 7mm/ GEX6 6N 5mm/4.5 10mm/ IEC IP65 GEX6 7N 143mm/5.6 14mm/ IEC IP65 GEX6 8N 396mm/ mm/ IEC IP65 DOOR COUPLING LEVER HANDLE, PADLOCKABLE ❶. Black rotating type with screw fixing on door. Shaft extension to order separately. GAX66 B❷ Pistrol grip, 65mm/ mm/0.3 ❷. IEC IP66 GEX6 1NB 94mm/3.7 7mm/ IEC IP65 GEX6 1NC 94mm/3.7 7mm/ IEC IP65 GEX6 2NC 143mm/5.6 10mm/ IEC IP65 GEX6 3NC 176mm/6.9 14mm/ IEC IP65 GEX6 4NC 396mm/ mm/ IEC IP65 GEX6 6NB 5mm/4.5 10mm/ IEC IP65 GEX6 7NB 143mm/5.6 14mm/ IEC IP65 GEX6 8NB 396mm/ mm/ IEC IP65 SHAFT EXTENSION for door coupling lever handles. GAX7 150A 150mm/5.9in; 7mm/ GAX7 200A 200mm/7.9in; 7mm/ GAX7 300A 300mm/.8in; 7mm/ GEX7 162N 177mm/6.97 ; 7mm/ GEX7 195N 195mm/7.7"; 14mm/ GEX7 227N 227mm/8.9 ; 10mm/ GEX7 239N 239mm/9.4 ; 14mm/ GEX7 250N 250mm/9.8 ; 7mm/ GEX7 345N 345mm/13.6 ; 14mm/ GEX7 375N 375mm/14.7 ; 10mm/ GEX7 387N 387mm/15.2 ; 7mm/ GEX7 536N 536mm/21.1 ; 10mm/ GEX7 535N 535mm/21.06 ; 14mm/ GEX7 485N 485mm/19.1 ; 14mm/ ❶ See tables on pages -21 to -25 for the correct choice based on the switch disconnector type used. ❷ Use with GAX7...A extension types only. Certifications obtained: EAC for all types; culus to UL98 / CSA C22.2 n 4 for GAX66 and GAX7...A types (see pages -8 and -10 for culus details). Compliant with standards: IEC/EN , IEC/EN Handle shape and length 50mm (2 ) 65mm (2.6 ) 94mm (3.7 ) 95mm (3.74 ) 105mm (4.1 ) 5mm (4.5 ) 143mm (5.6 ) 176mm (6.9 ) 245mm (9.6 ) 360mm (14.2 ) 396mm (15.6 ) Type of handle GEX61E-GEX65D GAX66-GAX66B GEX61N-GEX61NB GEX61NC GEX61D GEX62D GEX66ND-GEX66NB GEX66N GEX62NC-GEX62NE GEX67N-GEX67NB GEX67ND GEX63NC-GEX63NE 2-hand GEX63D 2-hand GEX64D 2-hand GEX64NC-GEX64NE GEX68N-GEX68NB GEX68ND -20 pages -30 to 49

21 GE series 50A to 1600A Summary table of combinations - Three and four-pole changeover switches Type IEC IEC rated Direct Door-coupling Shaft extension for Auxiliary Motorised Terminal covers Conventional operational operating handles door-coupling handles contacts control unit for: free air current Ie handle (the last 3 digits of GEX code indicate 1NO/1NC thermal length in mm/in) current Ith AC21A AC23B AC23B Black Black Red/Yellow Shaft Max panel Line 1 Line 2 Load ( 500V) ( 400V) ( 500V) section depth Order [A] [A] [A] Order Order Order Order [mm/in] Order Order Order Order Order code code code code code [mm/in] code code code code code Changeover switches. Three poles. GE0160 E GEX61E GEX61NC GEX7162N 7mm/ 269/10.59 GEX10M GEX8101 ❶ GEX8101 GE0200 E GEX7250N /13.36 ❶ GEX7387N 479/18.86 GE0201 E GEX62NE GEX62NC GEX7227N 10mm/ 279/10.98 GEX10 GEX691 GEX8212 GEX82 GEX83 GE0250 E GEX7375N /16.81 GE0315 E GEX7536N 588/23.15 GE0400 E GE0500 E GEX63NE GEX63NC GEX7195N 14mm/ 257/10.12 GEX692 GEX8222 GEX8221 GEX8321 GE0630 E GEX7345N /16.02 GE0800 E GEX7535N 597/23.50 GE1000 E GEX64NE GEX64NC 280/.02 GEX693 GEX8232 GEX8231 GEX8331 GE1250 E / /24.41 GE1600 E GEX7239N 14mm/ 579/22.79 GEX10M GEX8141 GEX8141 GEX7485N /32.48 Changeover switches. Four poles. GE0160 ET GEX61E GEX61NC GEX7162N 7mm/ 269/10.59 GEX10M GEX8101 ❶ GEX8101 GE0200 ET GEX7250N /13.36 ❶ GEX7387N 479/18.86 GE0201 ET GEX62NE GEX62NC GEX7227N 10mm/ 279/10.98 GEX10 GEX691 GEX8213 GEX8213 GEX8312 GE0250 ET GEX7375N /16.81 GE0315 ET GEX7536N 588/23.15 GE0400 ET GE0500 ET GEX63NE GEX63NC GEX7195N 14mm/ 257/10.12 GEX692 GEX8223 GEX8223 GEX8322 GE0630 ET GEX7345N /16.02 GE0800 ET GEX7535N 597/23.50 GE1000 ET GEX64NE GEX64NC 280/.02 GEX693 GEX8233 GEX8233 GEX8332 GE1250 ET / /24.41 GE1600 ET GEX7239N 14mm/ 579/22.79 GEX10M GEX8141 GEX8141 GEX7485N /32.48 ❶ GEX81 01 terminal cover protects the input of both Line 1 and Line 2. pages -43 to 45 page -51 page

22 GE series 50A to 1600A Summary table of combinations - Three-pole switch disconnectors Three-pole IEC IEC rated Direct Door-coupling Shaft extensions for Auxiliary Type of Terminal covers type Conventional operational operating handles door-coupling handles contacts fuse for: ❶ free air current Ie handle (the last 3 digits of GEX code indicate 1NO/1NC thermal length in mm/in) (SPDT) AC21A AC23A AC23A Black Black Red/Yellow Shaft Max panel Line Load ( 500V) ( 400V) ( 500V) section depth Order [A] [A] [A] Order Order Order Order [mm/in] Order Order Order code code code code code [mm/in] code code code Switch disconnectors. GE0160 P❷ GEX65D GAX66B GAX66 GAX7150A❺ 7mm/ 214/8.42 GEX10 ❷ ❷ GE GAX7200A❺ /10.39 GEX8101 GEX8101 GE GAX7300A❺ 364/14.33 GE0250❸ 250❸ GE GEX66ND GEX66NB GEX66N GEX7227N 10mm/ 267/10.51 GEX81 GEX81 GE GEX7375N /16.34 GE GEX7536N 576/22.68 GE GEX67ND GEX67NB GEX67N GEX7195N 14mm/ 251/9.88 GEX8121 GEX8121 GE GEX7345N /15.79 GE GEX7535N 591/23.27 GE GEX68ND GEX68NB GEX68N 267/10.51 GEX8131 GEX8131 GE / /23.90 GE GEX7239N 14mm/ 399/15.71 GEX8141 GEX8141 GEX7485N /25.39 Switch disconnectors with NFC fuse holder. GE0050 F❹ GEX61D GEX61NB GEX61N GEX7162N 7mm/ 192/7.56 GEX10N 14x51 ❹ ❹ GE0125 F❹ GEX7250N / x58 GEX7387N 402/15.83 Switch disconnectors with NH fuse holder. GE0160 N GEX61D GEX61NB GEX61N GEX7162N 7mm/ 192/7.56 GEX10N 00 GEX8201 GEX8201 GEX7250N /10.43 GEX7387N 402/15.83 GE0161 N GEX62D GEX66NB GEX66N GEX7227N 10mm/ 302/.89 GEX10 0 GEX82 GEX8212 GEX7375N /17.72 GEX7536N 6/24.05 GE0250 N GEX63D GEX67NB GEX67N GEX7195N 14mm/ 271/ GEX8221 GEX8222 GE0400 N GEX7345N / GEX7535N 6/24.05 GE0630 N GEX64D GEX68NB GEX68N 285/.22 3 GEX8231 GEX8232 GE0800 N / /24.61 Switch disconnectors with BS fuse holder. GE0160 B GEX62D GEX66NB GEX66N GEX7227N 10mm/ 302/.89 GEX10 A4 GEX82 GEX8212 GE0200 B GEX7375N /17.72 B1-B2 GE0250 B GEX7536N 6/24.05 GE0315 B GEX63D GEX67NB GEX67N GEX7195N 14mm/ 271/10.67 B1-B2-B3 GEX8221 GEX8222 GE0400 B GEX7345N /16.57 B1-B2-B3-B4 GEX7535N 6/24.05 GE0630 B GEX64D GEX68NB GEX68N 285/.22 C1-C2 GEX8231 GEX8232 GE0800 B /17.12 C1-C2-C3 625/24.61 ❶ The motorised control unit cannot be installed. ❷ Standard supplied with IP20 terminal protection warranted by wired equipment with only maximum conductor section of 95mm 2. Suitable for mounting on 35mm DIN (IEC/EN 60715) rail, adapters kit is available on page -19. ❸ IEC 250A Ith; IEC 200A AC21A 500V. ❹ Standard supplied with IEC IP20 terminal protection warranted by wired equipment with only maximum conductor section of 35mm 2 for GE0050 F and of 95mm 2 for GE0125 F. -22 pages -30 to 42 page -51 pages -54 and 56

23 GE series 50A to 1600A Summary table of combinations - Four-pole switch disconnectors Four-pole IEC IEC rated Direct Door-coupling Shaft extensions for Auxiliary Type of Terminal covers type conventional operational operating handles door-coupling handles contacts fuse for: ❶ free air current Ie handle (the last 3 digits of GEX code indicate 1NO/1NC thermal length in mm/in) (SPDT) AC21A AC23A AC23A Black Black Red/Yellow Shaft Max panel Line Load ( 500V) ( 400V) ( 500V) section depth Order [A] [A] [A] Order Order Order Order [mm/in] Order Order Order code code code code code [mm/in] code code code Switch disconnectors. GE0160 T4P❷ GEX65D GAX66B GAX66 GAX7150A❺ 7mm/ 214/8.42 GEX10 ❷ ❷ GE0160 T GAX7200A❺ /10.39 GEX8101 GEX8101 GE0200 T GAX7300A❺ 364/14.33 GE0250 T4❸ 250❸ GE0251 T GEX66ND GEX66NB GEX66N GEX7227N 10mm/ 267/10.51 GEX81 GEX81 GE0315 T GEX7375N /16.34 GE0400 T GEX7536N 576/22.68 GE0500 T GEX67ND GEX67NB GEX67N GEX7195N 14mm/ 251/9.88 GEX8121 GEX8121 GE0630 T GEX7345N /15.79 GE0800 T GEX7535N 591/23.27 GE1000 T GEX68ND GEX68NB GEX68N 267/10.51 GEX8131 GEX8131 GE1250 T / /23.90 GE1600 T GEX7239N 14mm/ 399/15.71 GEX8141 GEX8141 GEX7485N /25.39 Switch disconnectors with NFC fuse holder. GE0050 FT4❹ GEX61D GEX61NB GEX61N GEX7162N 7mm/ 192/7.56 GEX10N 14x51 ❹ ❹ GE0125 FT4❹ GEX7250N / x58 GEX7387N 402/15.83 Switch disconnectors with NH fuse holder. GE0160 NT GEX61D GEX61NB GEX61N GEX7162N 7mm/ 192/7.56 GEX10N 00 GEX8203 GEX8203 GEX7250N /10.43 GEX7387N 402/15.83 GE0161 NT GEX62D GEX66NB GEX66N GEX7227N 10mm/ 302/.89 GEX10 0 GEX8213 GEX8213 GEX7375N /17.72 GEX7536N 6/24.05 GE0250 NT GEX63D GEX67NB GEX67N GEX7195N 14mm/ 271/ GEX8223 GEX8223 GE0400 NT GEX7345N / GEX7535N 6/24.05 GE0630 NT GEX64D GEX68NB GEX68N 285/.22 3 GEX8233 GEX8233 GE0800 NT / /24.61 Switch disconnectors with BS fuse holder. GE0160 BT GEX62D GEX66NB GEX66N GEX7227N 10mm/ 302/.89 GEX10 A4 GEX8213 GEX8213 GE0200 BT GEX7375N /17.72 B1-B2 GE0250 BT GEX7536N 6/24.05 GE0315 BT GEX63D GEX67NB GEX67N GEX7195N 14mm/ 271/10.67 B1-B2-B3 GEX8223 GEX8223 GE0400 BT GEX7345N /16.57 B1-B2-B3-B4 GEX7535N 6/24.05 GE0630 BT GEX64D GEX68NB GEX68N 285/.22 C1-C2 GEX8233 GEX8233 GE0800 BT /17.12 C1-C2-C3 625/24.61 ❶ The motorised control unit cannot be installed. ❷ Standard supplied with IP20 terminal protection warranted by wired equipment with only maximum conductor section of 95mm 2. Suitable for mounting on 35mm DIN (IEC/EN 60715) rail, adapter kit is available on page -19. ❸ IEC 250A Ith; IEC 200A AC21A 500V. ❹ Standard supplied with IEC IP20 terminal protection warranted by wired equipment with only maximum conductor section of 35mm 2 for GE0050 FT4 and of 95mm 2 for GE0125 FT4. pages -42 to 30 page -51 pages -54 and 56-23

24 For photovoltaic applications GA series Three-pole switch disconnectors GA040 D GAX42...D GA080 D GA125 D Fourth pole add-on Order code IEC IEC rated Qty Wt conventional operational per free air current Ie pkg thermal DC21B❶ current Ith Poles in series 800V 1000V 4 p 6 p 8 p [A] [A] [A] [A] n [kg] Direct operating version, complete with black handle. For door-coupling version, separately purchase the handle and shaft extension; refer to pages -9 and -10. GA040 D GA080 D GA125 D ❶ For other operational voltages, refer to technical characteristics on page -52 or -58. NOTE: See UL/CSA ratings on page -58 and/or on the bottom of page -4. Fourth pole add-on with simultaneous closing operation as corresponding GA...D switch poles❶. GAX42 040D GAX42 080D GAX42 125D General characteristics IEC 40A to 125A ratings Available versions: Direct operating Door coupling version. Use switch disconnector with direct actuator and separately purchase the handle and shaft extension for this version. See pages -9 and -10. Screw or 35mm DIN (IEC/EN 60715) rail fixing Padlockable in 0 position with no extra accessory. Operational characteristics IEC rated insulation voltage Ui: 1000V IEC rated impulse withstand Uimp: 8kV Mechanical life: 100,000 cycles for GA040 D and GAX D 30,000 cycles for GA080 D, GAX D, GA125D and GAX42 125D. Transformation of direct operating version into door coupling type GA040 D GA080 D GA125 D ( 5mm/0.2 ) GAX7... GA040 D + GA040 D with GAX60 00 for 6 and 8 poles (GAX64/64B) 4-pole assembly GAX42 040D GA040 D GA080 D / GA125 D GAX42 080D / GAX42 125D UTILISATION IN DC21B❶ CATEGORY IEC operational voltage Ue 600V Maximum Assembly Products to purchase and Current [A] connect together 20 GA040D - 4 poles GA040D + GAX42040D 30 GA080D - 4 poles GA080D + GAX42080D 35 GA040D - 6 poles GA040D + GA040D + GAX GA125D - 4 poles GA125D + GAX42125D 45 GA080D - 6 poles GA080D + GA080D + GAX GA125D - 6 poles GA125D + GA125D + GAX6001 GAX61/61B (GAX63... only) GAX62/62B GAX63/63B GAX63 2/2B GAX64/64B 6-pole assembly GA040 D GA040 D GA040 D GAX42 040D GAX pole assembly GA040 D GA080 D / GA125 D GA080 D / GA125 D GAX42 040D GAX60 00 GA080 D / GA125 D GAX60 01 GAX42 080D / GAX42 125D IEC operational voltage Ue 800V Maximum Assembly Products to purchase and Current [A] connect together 15 GA040D - 4 poles GA040D + GAX42040D 18 GA080D - 4 poles GA080D + GAX42080D 20 GA125D - 4 poles GA125D + GAX42125D 25 GA040D - 6 poles GA040D + GA040D + GAX GA040D - 8 poles GA040D + GA040D + GAX GAX42040D + GAX42040D 40 GA125D - 6 poles GA125D + GA125D + GAX GA080D - 8 poles GA080D + GA080D + GAX GAX42080D + GAX42080D 60 GA125D - 8 poles GA125D + GA125D + GAX GAX42125D + GAX42125D IEC operational voltage Ue 1000V Maximum Assembly Products to purchase and Current [A] connect together 10 GA040D - 6 poles GA040D + GA040D + GAX GA080D - 6 poles GA080D + GA080D + GAX GA040D - 8 poles GA040D + GA040D + GAX GAX42040D + GAX42040D 32 GA080D - 8 poles GA080D + GA080D + GAX GAX42080D + GAX42080D 40 GA125D - 8 poles GA125D + GA125D + GAX GAX42125D + GAX42125D GA080 D GA125 D GAX60 B GA080 D + GA080 D / GA125 D + GA125 D with GAX60 01 for 6 and 8 poles GAX7150A GAX7200A GAX7300A ( 7mm/0.3 ) GAX66 GAX66 B Certifications obtained: EAC; UL Listed for USA and Canada (culus - File E93602) as Manual Motor Controllers, to UL508/CSA C22.2 n 14 for GA040 D and GAX42 040D; (culus - File E328470) as Open Type Switches to UL98/CSA C22.2 n 4 for GA080 D, GA125 D, GAX42 080D and GAX42 125D. Compliant with standards: IEC/EN , IEC/EN , UL508, UL98, CSA C22.2. Strokes of GA D types (switch and add-on pole) Travel GA040 D 60 Main poles GAX420 40D 60 Simultaneous fourth-pole add on GA080 D / GA125 D ❶ For other operational voltages, refer to technical characteristics on page -52 or -58. GA080 D - GA125 D Main poles GAX42 080D - GAX42 125D Simultaneous fourth-pole add on OFF ON GAX60 01 GAX42 080D / GAX42 125D -24 Add-on blocks/accessories pages -6 to 10 pages -30 to 33 page -52 page -54 and 59

25 For photovoltaic applications Four-pole switch disconnectors GE...DT4 - GE...DT4P Order code IEC IEC rated Qty Wt free air operational current Ie per thermal DC21B❷❸ pkg 220V 800V 1000V [A] [A] [A] [A] n [kg] Version for photovoltaic applications. Separately purchase the handle and shaft extension❶. GE0160 DT GE0160 DT4P❹ GE0125 DT GE0250 DT GE0315 DT GE0630 DT GE0800 DT GE1250 DT Selection of handles and accessories Types of handle to use per type are given below. Also refer to pages -19 or 20 and at page bottom for other accessories. Direct operating Door coupling Black Black Red/yellow GEX65D GAX66B GAX66 GEX66ND GEX66NB GEX66N GEX67ND GEX67NB GEX67N GEX68ND GEX68NB GEX68N ❶ Refer to the side table for the selection of the handle. A shaft insert is standard-supplied with all direct operating handles so no other shaft extension is required in this case. ❷ Connection of four poles in series. ❸ For other operational voltages, refer to technical characteristics on page -59. ❹ Standard supplied with IEC IP20 terminal protection. General characteristics IEC 160A to 1250A ratings Available versions: Direct operating Door coupling. Use switch disconnector with direct operation and separately purchase the handle and shaft extension. See page -20 and at page bottom. Screw fixing: 35mm DIN rail mount adapter kit for GE0160 DT4P on p. -19 Padlockable at 0 position with no extra accessory. Operational characteristics IEC rated insulation voltage Ui: 1000V Mechanical life: 30,000 cycles for GE0160 DT4, GE0160 DT4P 20,000 cycles for GE0125 DT4, GE0250 DT4, GE0315 DT4 10,000 cycles for GE0630 DT4, GE0800 DT4, GE1250 DT4. Certifications obtained: EAC. Compliant with standards: IEC/EN , IEC/EN Summary table of combinations Four-pole Conventional Rated Direct Door-coupling Shaft extension for Auxiliary Terminal covers type free air operational operating handles door-coupling handles contacts for: ❺ thermal current Ie handle (the last 3 digits of GEX code indicate 1NO/1NC current Ith DC21B ❻ length in mm/in) (SPDT) Black Black Red/Yellow Shaft Max panel Line Load 600V 800V 1000V section depth Order [A] [A] [A] [A] Order Order Order Order [mm/in] Order Order Order code code code code code [mm/in] code code code GE0160 DT GEX65D GAX66B GAX66 GAX7150A 7mm/ 214/8.42 GEX10 GEX8101 GEX8101 GE0160 DT4P❼ GAX7200A /9.29 ❼ ❼ GAX7300A 336/13.22 GE0125 DT GEX66ND GEX66NB GEX66N GEX7227N 10mm/ 267/10.51 GEX81 GEX81 GE0250 DT GEX7375N /16.34 GE0315 DT GEX7536N 576/22.68 GE0630 DT GEX67ND GEX67NB GEX67N GEX7195N 14mm/ 251/9.88 GEX8121 GEX8121 GE0800 DT GEX7345N /15.79 GEX7535N 591/23.27 GE1250 DT GEX68ND GEX68NB GEX68N 267/10.51 GEX8131 GEX / /23.90 ❺ The motorised control unit cannot be installed. ❻ Connection of four poles in series. ❼ Standard supplied with IEC IP20 terminal protection warranted by wired equipment with only maximum conductor section of 95mm 2. Suitable for mounting on 35mm DIN (IEC/EN 60715) rail, adapter kit is available on page -19. Add-on blocks/accessories pages -19 to 20 pages -30 to 33 page -52 page -54 and 59-25

26 100 (3.94 ) Switch disconnectors [mm (in)] GA SERIES - 16A TO 125A SWITCH DISCONNECTORS Direct operating version GA016 A - GA040 A GA063 SA GA040 D 36 (1.42 ) 5 (0.20 ) 70 (2.75 ) 43.9 (1.73 ) GA063 A - GA125 A GA080 D - GA125 D 70 (2.75 ) 5 70 (2.75 ) (0.20 ) 43.9 (1.73 ) 74 (2.91 ) 78 (3.07 ) 32.5 (1.28 ) 45 (1.77 ) 94 (3.70 ) 100 (3.94 ) 45 (1.77 ) 41.9 (1.65 ) 22 (0.87 ) 14.2 (0.56 ) 38.2 (1.50 ) 14.4 (0.57 ) Door mount version GA016 C - GA040 C GA063 C - GA125 C 36 (1.42 ) 52.7 (2.07 ) 19.9 (0.78 ) 70 (2.75 ) 48.6 (1.91 ) 20.8 (0.82 ) 78 (3.07 ) 55.5 (2.18 ) 44.8 (1.76 ) 100 (3.94 ) ADD-ON BLOCKS AND ACCESSORIES For GA016 A-GA040 A, GA063 SA, GA040 D For GA063 A-GA125 A, GA080 D, GA125 D Auxiliary contacts GAX10 A GAX 10EA Fourth pole GAX41 040A - GAX42 040A GAX41 063SA - GAX42 063SA GAX42 040D Neutral GAX31 A - earth/ground GAX33 A terminals Auxiliary contacts GAX10 A GAX12 10EA Fourth pole GAX41 125A GAX42 063A...GAX42 125A GAX42 080D...GAX42 125D Neutral GAX32 A - earth/ground GAX34 A terminals 9 (0.35 ) 12 (0.47 ) 46.2 (1.82 ) 43.6 (1.72 ) 12 (0.47 ) 5 (0.20 ) 70 (2.75 ) 43.6 (1.72 ) 9 (0.35 ) 12 (0.47 ) 48.6 (1.91 ) 42.6 (1.68 ) 23 (0.90 ) 5 (0.20 ) 70 (2.75 ) 43.9 (1.73 ) 78 (3.07 ) 72.6 (2.86 ) 41.6 (1.64 ) 78 (3.07 ) 32.5 (1.28 ) 78 (3.07 ) 72.6 (2.86 ) 41.6 (1.64 ) 100 (3.94 ) GAX 10EA GAX10 A GAX41 040A, GAX42 040A... GAX41 063SA, GAX42 063SA, GAX42 040D, GAX31 A, GAX33 A GAX12 10EA GAX10 A GAX41 125A, GAX42 063A... GAX42 125A, GAX42 080D, GAX42 125D, GAX32 A, GAX34 A Mechanical interlock GAX50 00 and mechanical coupling system GAX (2.83 ) 78 (3.07 ) 89 (3.50 ) 27 (1.06 ) 45 (1.77 ) Mechanical interlock GAX50 01 and mechanical coupling system GAX (5.51 ) 100 (3.94 ) 89 (3.50 ) 27 (1.06 ) 45 (1.77 ) GAX GAX60 00 GAX GAX60 01 For GA016 C - GA040 C Auxiliary contacts GAX10 C ) 46.2 (1.82 ) Fourth pole GAX41 040C - GAX42 040C - Neutral GAX31 C - earth/ground GAX33 C terminals ) 43 (1.69 ) For GA063 C - GA125 C Auxiliary contacts GAX10 C 8.5 (0.33 ) 46.2 (1.82 ) Fourth pole GAX41 125C - GAX42 063C...GAX42 125C Neutral GAX32 C - earth/ground GAX34 C terminals 23 (0.90 ) 48.6 (1.91 ) 78 (3.07 ) 41.6 (1.64 ) 72.6 (2.86 ) 78 (3.07 ) 100 (3.94 ) 41.6 (1.64 ) 72.6 (2.86 ) GAX10 C GAX41 040C - GAX42 040C GAX31 C - GAX33 C GAX10 C GAX41 125C, GAX42 063C, GAX42 125C, GAX32 C, GAX34 C -26

27 [mm (in)] Rotary handles GAX61/61B ( ) (0.87 ) (0.90 ) 36 (1.42 ) ( ) GAX62/62B 22 (0.87 ) ( ) 35 (1.38 ) 48 (1.89 ) 36 (1.42 ) 61.8 (2.43 ) Ø16 (0.63 ) ( ) 36 (1.42 ) Ø16 (0.63 ) 36 (1.42 ) 48 (1.89 ) GAX63/63B 34.3 (1.35 ) 35 (1.38 ) ( ) 3.3 (0.13 ) Ø3 (0.12 ) GAX63 1B 34.3 (1.35 ) 35 (1.38 ) ( ) 3.3 (0.13 ) Ø3 (0.12 ) 37 (1.46 ) Ø32.9 (1.29 ) Ø22.5 (0.88 ) 24.3 (0.96 ) GAX63 2/2B (0.20 ) ( ) 35 (1.38 ) 3.3 (0.13 ) Padlockable at ON ( 3 padlocks) per UNI 9490, UNI/EN Ø22.5 (0.88 ) 24.3 (0.96 ) 37 (1.46 ) Ø32.9 (1.29 ) Ø22.5 (0.88 ) 24.3 (0.96 ) GAX64/64B Ø20 (0.79 ) 35.5 (1.40 ) ( ) 35 (1.38 ) 3.3 (0.13 ) Ø22.5 (0.88 ) Ø22 (0.87 ) 24.3 (0.96 ) GAX66/66B 98 (3.86 ) 60 (2.36 ) ( ) 46 (1.81 ) 36 (1.42 ) GAX67 B ( ) (0.87 ) (1.38 ) 48 (1.89 ) 36 (1.42 ) Ø66 (2.60 ) Ø48 (1.89 ) 75 (2.95 ) Ø32 (1.26 ) 36 (1.42 ) Ø16 (0.63 ) 36 (1.42 ) 48 (1.89 ) Ø3 (0.12 ) Ø4.2 (0.16 ) Shaft extensions for door coupling handles GAX7... GA016 A...GA040 A GA063 SA - GA040 D 5 (0.20 ) A GAX7... GAX6... GAX7... used with GAX50 00, GAX50 01 and GAX (3.07 ) A1 GAX50 00 GAX (0.90 ) GA016 A...GA040 A GA063 SA - GA040 D GAX7... GAX6... GAX7...A used with GAX60 B and GAX66/66B 98 (3.86 ) 60 (2.36 ) GA063 A...GA125 A GA080 D - GA125 D 88 (3.46 ) 73 (2.87 ) 5 (0.20 ) 49 (1.93 ) 40 (1.57 ) B min. 10 (0.39 ) GAX60B GAX7...A Ø66 (2.60 ) 100 (3.94 ) 19 (0.75 ) GA063 A...GA125 A GA080 D - GA125 D 46 (1.81 ) 20 ±1 (0.79 ±0.04 ) GA063 A...GA125 A GA080 D - GA125 D GAX (2.95 ) ( ) A1 GAX (0.90 ) 5 (0.20 ) GAX7... A GAX67 B GAX7... GAX6... GAX7...A used with GAX60 01 and GAX66/66B handle 100 (3.94 ) GA063A...GA125A GA080D - GA125D B1 GAX6001 min. 10 (0.39 ) 19 (0.75 ) GAX7...A 19 (0.75 ) 46 (1.81 ) 20 ±1 (0.79 ±0.04 ) GAX ( ) A [mm (in)] maximum Extension Length Type of handle [mm (in)] GAX61... GAX62... GAX63... GAX64... GAX67 B GAX (2.16 ) (3.90 ) (3.82 ) (4.01 ) (4.57 ) (3.82 ) GAX (2.75 ) (4.49 ) (4.41 ) ((4.61 ) (5.16 ) 4.41 ) GAX (3.54 ) (5.27 ) (5.20 ) (5.39 ) (5.94 ) (5.20 ) GAX (5.90 ) (7.64 ) (7.56 ) (7.75 ) (8.31 ) (7.56 ) GAX (7.87 ) (9.61 ) (9.53 ) (9.72 ) (10.27 ) (9.53 ) GAX (.81 ) (13.54 ) (13.46 ) (13.66 ) (14.21 ) (13.46 ) GAX (15.75 ) (17.48 ) (17.40 ) (17.60 ) (18.15 ) (17.40 ) GAX (19.68 ) (21.42 ) (21.34 ) (21.53 ) (22.09 ) (21.34 ) A1 [mm (in)] maximum Used with Used with Extension Length GAX60 00 GAX50 00/GAX50 01 [mm(in)] Type of handle GAX61... GAX62... GAX63... GAX64... GAX67 B GAX (2.16 ) 6 (4.57 ) 4 (4.49 ) 9 (4.68 ) 133 (5.24 ) 4 (4.49 ) GAX (2.75 ) 131 (5.16 ) 129 (5.08 ) 134 (5.27 ) 148 (5.83 ) 129 (5.08 ) GAX (3.54 ) 151 (5.94 ) 149 (5.87 ) 154 (6.06 ) 168 (6.61 ) 149 (5.87 ) GAX (5.90 ) 2 (8.31 ) 209 (8.23 ) 214 (8.42 ) 228 (8.98 ) 209 (8.23 ) GAX (7.87 ) 261 (10.27 ) 259 (10.20 ) 264 (10.39 ) 278 (10.94 ) 259 (10.20 ) GAX (.81 ) 361 (14.21 ) 359 (14.13 ) 364 (14.33) 378 (14.88 ) 359 (14.13 ) GAX (15.75 ) 461 (18.15 ) 459 (18.07 ) 464 (18.27 ) 468 (18.42 ) 459 (18.07 ) GAX (19.68 ) 561(22.09 ) 559 (22.01 ) 564 (22.20 ) 578 (22.75 ) 559 (22.01 ) 75 (2.95 ) Extension Length B B1 with GAX66/66B handle [mm(in)] [mm(in)] [mm(in)] GAX7150A (6.93 ) ( ) ( ) GAX7200A (8.90 ) ( ) ( ) GAX7300A (12.83 ) ( ) ( ) -27

28 [mm (in)] Terminal covers GAX81 - GAX83 GAX82 - GAX84 GAX81 12 (0.47 ) GAX83 36 (1.42 ) 3.6 (0.14 ) 46 (1.81 ) GAX81 12 (0.47 ) GAX (0.50 ) (1.42 ) 46 (1.81 ) 10 (0.39 ) GAX82 23 (0.90 ) GAX84 70 (2.75 ) 20.7 (0.81 ) 46 (1.81 ) GAX82 23 (0.90 ) GAX84 70 (2.75 ) 8.6 (0.34 ) 46 (1.81 ) 9.9 (0.39 ) 26.4 (1.04 ) 26.4 (1.04 ) 10 (0.39 ) 10 (0.39 ) 37 (1.46 ) Fuse holder GAX GAX39 1UL 80.1 (3.15 ) 37.3 (1.47 ) 52.5 (2.07 ) 75.2 (2.96 ) ENCLOSED SWITCH DISCONNECTORS AND EMPTY ENCLOSURES GAZ GAZ / GAZ016...UL - GAZ040...UL GAZ GAZ1...UL 100 (3.94 ) Ø4.5 (0.18 ) 120 (4.72 ) 97 (3.82 ) GAZ063 S... - GAZ100 C... / GAZ065S...UL - GAZ063C...UL GAZ GAZ2...UL (4.78 ) 175 (6.89 ) 98.5 (3.88 ) (6.60 ) 159 (6.26 ) GAZ GAZ080...UL - GAZ125...UL GAZ GAZ3...UL 13 (0.51 ) 220 (8.66 ) 193 (7.60 ) 170 (6.69 ) 280 (.02 ) 210 (8.27 ) 54 (2.12 ) 120 (4.72 ) 23.3 (0.92 ) PG13.5 / M20 PG16 / M25 knockouts on top and bottom 28 (1.10 ) 52 (2.05 ) PG16 / M25 PG29 / M32 knockouts on top and bottom Drilling for surface fixing (6.04 ) Ø 4.5 (0.18 ) 184 (7.24 ) Drilling for surface fixing 178 (7.01 ) Ø 6.2 (0.24 ) 238 (9.37 ) -28

29 [mm (in)] ENCLOSED CHANGEOVER SWITCHES GAZ025 ET6...GAZ063 SAET6 GAZ025 ET8...GAZ063 SAET8 Drilling for surface fixing 175 (6.89 ) (7.26 ) (6.04 ) Ø 4.5 (0.18 ) GAZ080 ET6 - GAZ125 ET6 GAZ080 ET8 - GAZ125 ET8 280 ((.02 ) 208 (8.19 ) 172 (6.77 ) 13 (0.51 ) 220 (8.66 ) 210 (8.27 ) 52 (2.05 ) 28 (1.10 ) ) 184 (7.24 ) PG16 / M25 PG29 / M32 knockouts on top and bottom Drilling for surface fixing Ø 6.2 (0.24 ) 238 (9.37 ) 178 (7.01 ) -29

30 [mm (in)] GE SERIES - 160A TO 1600A SWITCH DISCONNECTORS GE (5.16 ) 53 (2.09 ) 78.2 (3.08 ) 14 (0.55 ) GE0160 T4 - GE0160 DT4 142 (5.59 ) 64 (2.52 ) 78.2 (3.08 ) 18 (0.71 ) 14 (0.55 ) 22.4 (0.88 ) Door coupling version with handle GAX66 - GAX66 B max. 364 (14.33 ) 77 (3.03 ) 29 (1.14 ) 66 (2.60 ) 3 (0.12 ) GAX7 150A GAX7 200A GAX7 300A 7 (0.3 ) 46 (1.81 ) Drilling 36 (1.42 ) 128 (5.04 ) 0 (4.33 ) 84.4 (3.32 ) Ø4.5 (0.18 ) 128 (5.04 ) 0 (4.33 ) 84.4 (3.32 ) N Ø4.5 (0.18 ) 85 (3.35 ) Ø66 (2.60 ) 75 (2.95 ) Ø32 (1.26 ) 36 (1.42 ) Ø4.2 (0.16 ) 34 (1.34 ) 34 (1.34 ) M8 M8 34 (1.34 ) 34 (1.34 ) 34 (1.34 ) ❶ Not indicated on GE0160 DT4 type. 20 (0.79 ) GAX ( ) Direct operating version with handle GEX6 5D With terminal cover and auxiliary contact 102 (4.01 ) 68 (2.68 ) 184 (7.24 ) 2 (0.08 ) GEX81 01 (line) 3 (0.12 ) 22.4 (0.88 ) 87 (3.42 ) 50 (1.97 ) GEX6 5D 254 (10 ) N 85 (3.35 ) GEX10 GEX81 01 (load) GE0160 P GE0160 T4P - GE0160 DT4P Door coupling version with handle GAX66 - GAX66 B 129 (5.08 ) 53 (2.09 ) 18 (0.71 ) 76 (2.99 ) 9.5 (0.37 ) 140 (5.51 ) 64 (2.52 ) 76 (2.99 ) 18 (0.71 ) 9.5 (0.37 ) max. 364 (14.33 ) 77 (3.03 ) 29 (1.14 ) 66 (2.60 ) GAX7 150A GAX7 200A GAX7 300A 7 (0.3 ) 46 (1.81 ) Drilling 36 (1.42 ) 122 (4.80 ) 74 (2.91 ) Ø4.5 (0.18 ) 122 (4.80 ) 74 (2.91 ) N Ø4.5 (0.18 ) 85 (3.35 ) Ø66 (2.60 ) 75 (2.95 ) Ø32 (1.26 ) 36 (1.42 ) Ø4.2 (0.16 ) 34 (1.34 ) 34 (1.34 ) M8 Direct operating version with handle GEX6 5D 68 (2.68 ) 34 (1.34 ) 34 (1.34 ) 34 (1.34 ) M8 ❶ Not indicated on GE0160 DTP4 type. With auxiliary contact 19 (0.75 ) GAX ( ) 102 (4.01 ) N GEX6 5D 50 (1.97 ) GEX10-30

31 AXIS & Stuifmeel BV Coenecoop PV Waddinxveen Netherlands Tel: +31 (0) Official Lovato distributor for the Benelux