194E FA 32 E P11 P11 6

Transcription

1 Bulletin E IEC Load Switches, A Product Selection/Catalog Number Explanation Bulletin E Enclosed Disconnect Load Switches with R Handles (with Defeater, suitable for padlocks) E-FA Painted Steel Enclosure UL Type //, IP E-CA Stainless Steel Enclosure UL Type /, IP E-KA Non-Metallic Enclosure UL Type //, IP E-AA Metallic Enclosure UL Type, IP E-GA Painted Steel Enclosure UL Type //, IP E-DA Stainless Steel Enclosure UL Type /, IP Explanation FA GA CA DA KA AA a Enclosure Type UL Type //, IP Painted Steel, Hinged, for A switches UL Type //, IP Painted Steel, Hinged, in x x in. size, for A -pole switches UL Type /, IP Stainless Steel, Hinged, for A switches UL Type /, IP Stainless Steel, Hinged, in x x in. size, for A -pole switches UL Type //, IP Non-Metallic, for A switches UL Type, IP Painted Steel, Hinged, for A switches (Same enclosure as FA without gasketing) E FA E P P a b c d d e b Load Size A A A A A A A Blank E c Handle Color (R-HS ) Grey/Black Blank d Left Side + Right Side Modifications No ption -P N.. + N.C. Auxiliary Contacts -PL N.. + N.C.L.B. Auxiliary Contacts -P N.. + N.C. Auxiliary Contacts -PD -NP -PE -TN Blank N.. E.B. Additional Pole Grounding Pole Neutral Pole e Switch Type -pole switch - Pole switch Modifications: Up to two suffix codes may be added to an enclosed disconnect load switch. See Guidelines, page -. If only one accessory is chosen, it is mounted on the left side of the switch. To order the cat. no. E-FA/FA or E-CA/CA in the larger /A sized enclosure, add an "" after the handle color. For example, E-FAE becomes E-FAE. GA and DA type enclosures: use with -pole A switches only. Special order; allow for longer delivery time. Frequently rdered Bulletin E Enclosed Switches with Bulletin R Handle Description Rated Current (A) Dimension Reference Handle Color A Black E-CA E-CAE Stainless steel Black E-CA enclosure, A IP/Type / E-CAE A Black E-CA E-CAE A Black E-FA E-FAE Painted steel Black E-FA enclosure, A IP/Type // E-FAE A Black E-FA E-FAE Non-metallic Black E-KA enclosure, C IP/Type / E-KAE Modifications: Up to two suffix codes may be added to an enclosed disconnect load switch. See Guidelines, page -. If only one accessory is chosen, it is mounted on the left side of the switch. - Publication A-CAA-EN-P

2 Bulletin E IEC Load Switches, A verview Bulletin E IEC Load Switches Suitable as At-Motor Disconnect Switch (UL),,,,,, A Inductive Load-Rated Switches IP/ UL Type //R/ perating Handles IPL Finger-Safe Terminals - and -Pole Versions; Add-on Accessory Poles to Make -, -, - and -Pole Units Front/Door or DIN/Base Mounting Configurations Available in FF-N and Changeover Configurations - and -Pole Enclosed Switches ptional Thermoplastic Enclosures Positive-Guided Actuation Padlockable Handles Available (up to padlocks) Table of Contents Product Selection... - Accessories... - Specifications... - Approximate Dimensions... - Standards Compliance IEC - IEC - Low-voltage switchgear and control gear part UL CSA: C. No. Certifications UL Listed (File No. E, Guide NLRV) CSA Certified (LR ) IEC, VDE and BS CE RINA Italian Naval Registry CCC Description Bulletin E load switches are designed for use as local motor isolation and disconnect switch applications. Available with - and -pole versions with add-on additional poles, grounding and neutral terminals and auxiliary contacts, Bulletin Es share the same operating handles as the Bulletin L Control and Load Switches. Bulletin E switches are offered in two mounting styles, Front/Door and Base/DIN configurations for a variety of installations. Switch body styles for Bulletin E base-mounted switches include standard interlock shaft; Bulletin E front-mounted switches include standard shaft. Two-position FF-N switch is used to connect or disconnect a variety of inductive loads, including solenoids, valves, magnetic starters, relays, and motors. Handles featuring marked legend plates are available in Selector-Knob, Disk-Style, Rectangular-Style and Key-perated versions. Selector-Knob versions are available in three sizes. Most handles are available in colors of Grey/Black or and have padlockable versions. - Publication A-CAA-EN-P

3 Bulletin E IEC Load Switches, A Catalog Number Explanation/Product Selection Explanation E A Small-Frame Switches (Handles listed on page -) -Pole Base Mount -Pole Front Mount -Pole Base Mount -Pole Front Mount A E a Installation Type Description Base/DIN Mounting Front/Door Mounting E A b Load Size Description A A A A A A A a b c c Function/Circuit Diagram Ref. # Function Description Circuit Diagram Ref. # FF/N -Pole, -Position ( ) FF/N -Pole, -Position ( ) FF/N -Pole, -Position ( - inverted) Changeover -Pole, -Position ( ) Frequently rdered FF-N -Pole Switch (includes operating shaft) (Handles listed on page -) Function Switching Angle FF Function Switching Angle FF N N No. of Circuits No. of Circuits Contact Target Configuration = Contact Closed = Contact pen Handle Position Base-Mounted Front-Mounted FF/ N/ ACA Rated Power V Rated Current [A] [kw] at V AC Hz AC Hz Ø.. E-A- E-E- E-A- E-E- Contact Target Configuration = Contact Closed = Contact pen FF-N -Pole Switch (includes operating shaft) Handle Position Base-Mounted Front-Mounted FF/ N/ ACA Rated Power V Rated Current [A] [kw] at V AC Hz AC Hz Ø.. E-A- E-E- See Catalog No. Explanation for more load size and change-over switch options. FF-N -Pole Switch (includes operating shaft) E-A- E-E-. E-A- E-E- E-A- E-E- E-A- E-E- E-A- E-E- Frequently rdered FF-N -Pole Switch (includes operating shaft) (Handles listed on page -) E-A- E-E- E-A- E-E-. E-A- E-E- E-A- E-E- E-A- E-E- E-A- E-E- Publication A-CAA-EN-P -

4 Bulletin E IEC Load Switches, A Product Selection/Catalog Number Explanation Bulletin E/L Handles (for use with Bulletin E Switches) Color Handles (Includes Legend Plate and Control Knob) (Emergency Stop colors) Type I (IP, UL Type /R/) Type L (IP, UL Type /R/) With Locking For ne Padlock (Padlock Not Included) Type N (IP, UL Type /R/) Bulletin L handles are available in both screw fixing and. mm mounting hole style. Black/Grey (Standard peration colors) Handle Type E L G N L Degree of Protection Handle Color Bezel Plate Size For Use With Black/Grey E- A x mm L-E A, - (-/ x -/ in.) L-A A, - IP (UL Type ) (UL Type /R/) IP (UL Type /R/) IP (UL Type /R/) Type A (IP, UL Type /R/) Black/Grey Type E (IP, UL Type /R/) With Locking For ne Padlock (Padlock Not Included) x mm (-/ x -/ in.) x mm (-/ x -/ in.) x mm (-/ x -/ in.) x mm (-/ x -/ in.) x mm (-/ x -/ in.) x mm (-/ x -/ in.) x mm (-/ x -/ in.) x mm (-/ x -/ in.) Type G (IP, UL Type /R/) These handles are for use with - and - (N-FF) switches only and are dual marked with N-FF and -. Explanation HC HE Use with Handle Type A, E, I, L S A, E, I, L G, N S A, I G, N a Installation Type. mm Mounting Hole Style Handle (for use with front-mounted switches) Screw-Mounting Handle (for use with front- and base-mounted switches) b Handle Legend Plate Size mm x mm (-/ in. x -/ in.) mm x mm (-/ in. x -/ in.) mm x mm (-/ in. x -/ in.) mm x mm (-/ in. x -/ in.) mm x mm (-/ in. x -/ in.) mm x mm (-/ in. x -/ in.) mm x mm (-/ in. x -/ in.) L HE N Use With E Switch Size E- A E- A E- A E- A E- A E- A E- A a b c d c Legend Plate Type Color A Square Grey/Black I Square E Square/Lockable Grey/Black L Square/Lockable G N S Disc/Lockable (up to locks) Disc/Lockable (up to locks) Large Square with extra legend area Grey/Black Grey/Black For. mm mounting hole style handle (code HC), select either handle type A, E, I, or L with x mm legend plate size (code ) only or handle type G or N with x mm legend plate size (code ) only. rder E- A Type G and N handles as E-HEN- or E-HEG- Use Type G and N with N-FF function only (selection "d", code -) R-HE front-mounting switch only Frequently rdered L Handles FF-N Base/Front-Mounted - and -Pole Switch Handles (Switch Body listed on page -) E- A L-E A, - L-A A, - E- A E- A L-E A, - L-A A, - E- A E- A E- A L-E A, - L-A A, - E- A L-E A, - Legend Plate Marking - L-HEE- FF-N L-HEE-I - L-HEL- FF-N - FF-N - FF-N - FF-N - FF-N - FF-N Type S (IP, UL Type /R/) d Description Legend Marking -I N I FF-N -- (Reversing) -- ( degrees) (Changeover) -I I FF-N FF FF N L-HEL-I E-HEG- L-HEG- L-HEG- E-HEN- L-HEN- - FF-N L-HEN- - L-HCL- FF-N L-HCL-I - Publication A-CAA-EN-P

5 Bulletin E IEC Load Switches, A Catalog Number Explanation/Product Selection Bulletin E pen and Enclosed Switch Kits Explanation A E Y a Installation Type Base/DIN Mounting, open type switch Front/Door Mounting, open type switch Enclosed Base Mounting Switch With Handle (Uses IP ABS thermoplastic enclosure) E Y N b Load Size A A A A A A A a b c d For A Enclosed Switch: use "M" (-pole enclosure has M/ knockouts, -pole A enclosure has M/ knockouts). For / A Enclosed Switch with M/ metric knockouts: use M or M. c Configuration -Pole FF/N ( ) -Pole FF/N ( ) N G A N G A d Handle Style E-HEN- (use with A Switch) E-HEG- (use with A Switch) L-HEA- (use with A Switch) L-HEN- (use with A Switch) L-HEG- (use with A Switch) L-HEA- (use with A Switch) Frequently rdered Switch Kits FF-N Front- and Base-Mounted -Pole Switch With L-HEN- Handle Function Switching Angle FF N Rated Current [A] ACA Rated Power [kw] at V AC V AC Hz, Ø Base-Mounting Distribution Switches (handles are pre-assembled to switch) Function Switching Angle FF N No. of Circuits Base-Mounted Front-Mounted. E-A--N E-E--N E-A--N E-E--N. E-A--N E-E--N Contact Target FF/ N/ Handle Color Frequently rdered Enclosures - and -Pole Enclosed Switches With L-HEN- perating Handles No. of Poles Function Switching Angle FF N Legend Plate Marking Lockable (ne Padlock) Rated Current [A] ACA Rated Power [kw] at V AC V AC Hz, Ø E-A--R - Yes Black/Grey - No E-A--Q - Yes E-A--R Black/Grey - No E-A--Q Rated Current [A] Handle Color E-Y--N E-Y--N E-Y--N E-Y--N Uses Base-Mounted Switches E-Y--N Publication A-CAA-EN-P -

6 Bulletin E IEC Load Switches, A Accessories IEC Load Switch Accessories E-E A, Front/Door Mounting () -Pole Auliliary Contact or () -Pole Auliliary Contact or Grounding Terminal or Additional Pole Neutral Terminal or () -Pole Auliliary Contact or () -Pole Auliliary Contact E-A A, Base/DIN Rail Mounting () -Pole Auliliary Contact or () -Pole Auliliary Contact or Grounding Terminal Additional Pole or Neutral Terminal or () -Pole Auliliary Contact or () -Pole Auliliary Contact Accessory Configuration Guidelines Accessory drawings represent modular, snap-on features of Bulletin E accessories. They are not suggesting possible accessory configurations. Use the following guidelines for choosing E accessory configurations. Up to two accessories may be added to the Bulletin E switch body. For the E,,,, or A switches, the early break auxiliary contact (-PD) may only be used in the following configurations: As a single unit on either side of the switch As a single unit on a side when used with a switch + th pole (-NP) As a single unit on a side when used with a switch + ground terminal (-PE) As a single unit on a side when used with a switch + neutral terminal (-TN) No other auxiliary contact may be used in combinations with an early break auxiliary contact (-PD) ther combinations of auxiliary contacts are permissable. For the E and A switches, any combination of auxiliary contacts, th pole, ground terminal, neutral terminal, and -PD is permissable. Publication A-CAA-EN-P -

7 Bulletin E IEC Load Switches, A Accessories Auxiliary Contacts No. of Auxiliary Contacts For Use With N.. + N.C. E-A E-A-P E-E E-E-P N.. + N.C.L.B. E-A E-A-PL E-E E-E-PL N.. + N.C. E-A E-A-P E-E E-E-P E-A E-A-PD N..E.B. E-A... E-A-PD E-E E-E-PD E-E... E-E-PD Additional Pole, N.. For Use With E-A E-A E-A E-A E-A E-A E-A E-E E-E E-E E-E E-E E-E E-E E-A-NP E-A-NP E-A-NP E-A-NP E-A-NP E-A-NP E-A-NP E-E-NP E-E-NP E-E-NP E-E-NP E-E-NP E-E-NP E-E-NP -Pole Mechanical Coupling For Use With E- E-G E-/ E-G E-/ E-G E-/ E-G Earthing/Grounding Terminal For Use With E-A E-A/ E-A/ E-A/ E-E E-E/ E-E/ E-E/ E-A-PE E-A-PE E-A-PE E-A-PE E-E-PE E-E-PE E-E-PE E-E-PE Neutral Terminal For Use With E-A E-A/ E-A/ E-A/ E-E E-E/ E-E/ E-E/ E-A-TN E-A-TN E-A-TN E-A-TN E-E-TN E-E-TN E-E-TN E-E-TN A maximum of two side-mount accessories may be added to a E switch (one on each side). ABS Thermoplastic Enclosure IP, For High-Impact Applications (grounding screw included) Description No. of Poles For Use With E-A/ L-G E-A/ E-G For PG cable glands E-A/ E-A/ E-G E-A/ E-A/ L-GM E-A/ E-GM For metric cable glands E-A/ E-A/ E-GM E-A/ - Publication A-CAA-EN-P

8 Bulletin E IEC Load Switches, A Accessories Noryl Thermoplastic Enclosures IP, For Corrosion-Prone Applications (grounding screw included) Description No. of Poles For Use With For PG cable glands For metric cable glands E-A/ L-G E-A/ E-A/ E-A/ E-A/ E-G E-G E-A/ L-GM E-A/ E-A/ E-A/ E-A/ E-GM E-GM Description For Use With Pkg. Qty. Additional Earth/Ground and Neutral L-G, G, G, G E-G Terminals For Thermoplastic Enclosure L-G and G E-G Terminal Covers No. of Poles For Use With E- E--C E- E--C E-/ E--C E-/ E--C E-/ E--C E-/ E--C E-/ E--C E-/ E--C User must order () Bulletin E -Pole Switches separately. Coupling for changeover switch not available. Changeover switch must be ordered as a factory-assembled device (e.g., E-A-). perating Shafts Length Construction Pkg. Qty. mm (-/ in.) Plastic L-G Standard Shaft (for front-mount switches) Metal E-G mm (-/ in.) Plastic L-G (Standard Length) Metal E-G mm (-/ in.) Plastic L-G Metal E-G Interlock Shaft (for base-mount switches) mm (-/ in.) Plastic L-G Bulletin E Load Switch Shaft Selection for use with E and L Thermoplastic Enclosures Rated Current [A] -Pole Switches (- suffix) -Pole Switches (- suffix) Changeover Switches (- suffix) E-E E-A E-E E-A E-E E-A plastic shaft ( L-G) plastic shaft ( L-G) plastic shaft ( L-G) No. E-G) No. E-G) No. E-G) No. E-G) plastic shaft ( L-G) plastic shaft ( L-G) plastic shaft ( L-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. L-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) No. E-G) Publication A-CAA-EN-P -

9 Bulletin E IEC Load Switches, A Accessories/ther Accessories Shaft Extension Kits Shaft Extension Length For Use With Pkg. Qty. mm (/ in.) Per Extension E-A L-G Metal Shaft Extensions With Padlock Provision in FF Position Length For Use With Pkg. Qty. mm (-/ -/ in.) mm (-/ -/ in.) Metal Shaft Adaptor Kits For use with R Type / Handles Metal shaft adaptor kits for use with R Type / handles kit includes bezel adapter and R-R operating shaft. perating handle ( R-HS) must be ordered separately. Metal Shaft Extension For modification of L-G/ G when used with any switches other than -position, rotation. E-A ther Accessories L/E. mm Mounting Hole Style Handles (Type B, D) (For Front-Mounted Switches) Description L-G L-G For Use With Pkg. Qty. E-A E-G E-A L-G. mm Mounting Hole Style Handles (IP) Handle Style: Knob Lever with Latch (For Use With E-E A, -) or L- E A L-HCB- Type B Type D. mm Mounting Hole Style Handles Key Removal Position (Includes Latch) For Use With L-E A, E-E A, -. mm Mounting Hole Style Handles Key Removal Position (Includes Latch) For Use With L-E A, E-E A, -. mm Mounting Hole Style Handles Key Removal Position (Includes Latch) For Use With L-E A, E-E A, - L-HCDC- L-HCDD- L-HCDG- Accessory Description Pkg. Qty. Control Knob, Black, with Locking Facility (Use / in. max. hasp lock.) (Locks in,,, L-GN and positions) Control Knob, Red, with Locking Facility (Use / in. max. hasp lock) L-GR These locking knobs can only be added to the "HE" style actuators. If a locking knob is desired on a "HC" style actuator, it has to be ordered as part of the main catalog number. For example, L-HCE-. - Publication A-CAA-EN-P

10 Bulletin E IEC Load Switches, A ther Accessories Accessory Description Pkg. Qty. Control Knob, Type P Control Knob, Black, mm (-/ in.) Diameter Control Knobs, Type P Control Knob, Red, mm (-/ in.) Diameter Control Knob, Black, L =. mm (-/ in.) Control Knob, Black, L = mm (-/ in.) Control Knob, Red, L =. mm (-/ in.) Control Knob, Red, L = mm (-/ in.) L-GN L-GR L-GN L-GN L-GR L-GR Standard Black Control Knob Rectangular Front Frame Rectangular front frame with blank nameplate L = x mm (-/ x -/ in.) Rectangular front frame with blank nameplate L = x mm (-/ x -/ in.) L-G L-G Additional Legend Plates/Frames Color Legend Size For Use With Pkg. Quantity Black/Grey Black/Grey. mm x mm / in. x -/ in. x mm / x -/ in. Size Type G and N style handles, Cat. Nos. L- HEG/N Size Type G and N style handles, Cat. Nos. L- HEG/N Legend Plate Marking (Blank) MAIN SWITCH HAUPSCHALTER INTERR. PRINCIPALE INTERR. PRINCIPAU INTERR. PRINCIPAL HUVUDBRYTARE WAHLSCHALTER EMERGENCY FF (Blank) MAIN SWITCH HAUPTSCHALTER INTERR. PRINCIPALE INTERR. PRINCIPAU INTERR. PRINCIPAL HUVUDBRYTARE WAHLSCHALTER EMERGENCY FF L-G L-GA L-GB L-GC L-GD L-GE L-GF L-GG L-GH L-G L-GA L-GB L-GC L-GD L-GE L-GF L-GG L-GH Legend Plates with Bezel Legend Plate Color Silver Yellow Pkg. Quantity Custom-Engraved legend plates available. To order, use publication L-PP_-EN-P. Legend Plate Marking - FF-N Blank Legend Plate L-A- L-A-I L-A- L-A- L-A-I L-A- L-A- L-A-I L-A- L-I- L-I-I L-I- L-I- L-I-I L-I- L-I- L-I-I L-I- Publication A-CAA-EN-P -

11 Bulletin E IEC Load Switches, A ther Accessories Shaft for Enclosures Enclosure Type Suitable For L (Base-Mounted Switches) No. of Contacts Shaft Suitable For Use with E Switch No. of Poles Shaft Required L-G L-A() / L-G E-A() and L-G L-G L-A() / Standard L-A() / L-G ( x x mm) L-A() / Standard L-G L-A() / L-G L-G L-A() / L-G L-A() / Standard L-A() / L-G ( x x mm) L-A() / Standard E-G E-A() and L-G E-G E-A() Standard ( x x mm) E-G E-A() and E-G E-G E-A() Standard ( x x mm) Accessory Combinations in Enclosure Enclosure Type Switch No. of Poles Shaft L-G (ABS) L-G (Noryl) E-A() L-G Aux. Contacts (single or double) Additional Pole Block Neutral Terminal Block n Switch Ground Terminal Block Neutral Terminal Block n Enclosure ( x x mm) E-G (ABS) E-A() L-G E-G (Noryl) ( x x mm) E-A() E-G E-G (ABS) E-A() E-G E-G (Noryl) ( x x mm) E-A() E-G L+R Ground Terminal Block - Publication A-CAA-EN-P

12 Bulletin E IEC Load Switches, A Specifications Electrical Ratings Performance Data A A A A A A A Aux. IEC Applications Contacts Rated operational voltage (U e ): IEC [V] Rated operational voltage ( U e ): UL, CSA [V] Rated isolation voltage ( U i ): IEC/UL, CSA [V] / / / / / / / / Rated impulse voltage ( U imp ): UL, CSA [kv] Test voltage, ( U i ) minute [kv] Lost power per pole [W] Rated frequency [Hz] / / / / / / / / Conventional free air thermal current I th [A] Conventional enclosed thermal current I e [A] Rated current I e AC-/ Non-inductive or only slightly inductive loads [A] AC-A Switching of resistive loads with slight overload Rated power P e AC-A ccasional switching of Ø motors V [kw].... and other highly inductive loads V [kw]. (criterion for selecting main switches) V [kw].. V [kw]... AC- Squirrel-cage motors; starting and stopping of running motors V [kw]... V [kw]... Short circuit current (co-ordination type ) [ka] Rated conditional short-circuit current Maximum fuse rating of circuit (type g,g) /V [A] Rated short-time current I cw ( s) [A] V [A] Rated breaking capacity ACA (cosφ.) V [A] V [A] DC switching capacity /V [A] Rated current I e pole V [A] V [A]. V [A] V [A] poles V [A] in V [A] DC-A For resistive loads, series V [A].. T ms V [A]..... U e max = V V [A] poles V [A] in series V [A] V [A]... Rated power P e DC-A, DC-, DC- V [kw] For inductive loads, T ms See standards compliance listed on page -. Suitable also for SEV. poles in series V [kw]..... V [kw] V [kw] V [kw] Publication A-CAA-EN-P -

13 Bulletin E IEC Load Switches, A Specifications Electrical Ratings, Continued Performance Data A A A A A A A Aux. UL/CSA Applications Contacts Continuous current [A] Heavy Pilot Duty [AC] A A A A Standard Duty [DC] Q Motor rating Hz FLA V, P Hp. FLA V, P Hp Single-phase ( FLA.. poles) V, P Hp. V, P FLA... Hp. V, P FLA.... Hp. Three-phase V, P FLA.. Hp. V, P FLA Hp. V, P FLA Hp Mechanical Data Performance Data A A A A Aux. Contacts Protection class according to IEC Motor rating Hz handles IP IP IP IP IP switch bodies IP IP IP IP IP Mechanical life [million operations]..... Max wire gauges Terminal size per IEC - A A A A xa rigid wire fine strands / conductor / conductor AWG mm AWG mm () /() () /() () /() (). /(). () /() (). /(). () /() (). /() () /() (). /(). () /() (). /(). () /() () /() () /() () /().... Environmental Data Storage peration + C ( + F) + C ( + F) - Publication A-CAA-EN-P

14 Bulletin E IEC Load Switches, A Appropriate Dimensions Dimensions are shown in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Front Installation E-E (/) (/). (/) Dia.. (/) -Pole -Pole Handles P Q L-HEA L-HEI L-HES E-HEN E-HEG L-HEA L-HEI L-HES L-HEN L-HEG (-/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) x (-/ x -/) x (-/ x -/) x (-/ x -/) x (-/ x -/) x (-/ x -/) x (-/ x -/) x (-/ x -/) x (-/ x -/) x (-/ x -/) x (-/ x -/) Switch Body Use with B B F H L G E-E E-E/ E-E/ E-E/ (-/) (-/) (-/) (-/) N/A N/A (-/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) () (-/) (-/) (-/) Does not apply to E-/A, -Pole Switches. Use B dimensions for -pole devices. For -pole switches, add in. to the "L" dimension. (-/) (-/) (-/) (-/) E-E Switch Body with L-HCA Handle for. mm Hole Mounting Style Type L E-E () E-E/. (-/) E-E/. (-/) E-E/. (-/) Publication A-CAA-EN-P -

15 Bulletin E IEC Load Switches, A Appropriate Dimensions Dimensions are shown in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Base Mounting E-A -Pole -Pole Handles P Q L-HEA (-/) L-HEI (-/) L-HES (-/) E-HEN (-/) E-HEG (-/) L-HEA (-/) L-HEI (-/) L-HES (-/) L-HEN (-/) L-HEG (-/) x (-/ x -/) x (-/ x -/) x (-/ x -/) x (-/ x - /) x (-/ x - /) x (-/ x -/) x (-/ x -/) x (-/ x -/) x (-/ x -/) x (-/ x -/) Cover Requirements For Use With Y min. Y max. E-A (/) (-/). (/) (-/) E-A/ (/) (-/). (/) (-/) E-A/. (/) (-/). (/) (-/) E-A/. (/) (-/). (/) (-/) Switch Body Use With D E F F G H L J E-A. (/) E-A/. (/) E-A/. (/) (- /) (- /) (- /) E-A/. (/) (-/) (- /) (- /) (- /). (- /) For -pole switches, add in. to the "L" dimension.. (/) (- /) (/) (-/) (/). (/) (- /) (- /) (- /) (- /) (- /) (- /) (- /) (- /) (- /) (-/) (- /) (- /) (-/) (- /) - Publication A-CAA-EN-P

16 Bulletin E IEC Load Switches, A Appropriate Dimensions Dimensions are shown in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Base Mounting E-A E-A Switch Body with L-G Shaft Extension Shaft extensions Switch body L With shaft extension (-/) With shaft extensions (-/) With shaft extensions () With shaft extensions (-/) With shaft extensions (-/) With shaft extensions (-/) For -pole switches, add in. to the "L" dimension. Switch Body E-A E-A / E-A / E-A / (-/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) Shaft L-G L-G L-G Y.. (/ /) (/ /) (/) (/) Handles Type B Q P L-HEA L-HEI E-HEG E-HEN L-HEA L-HEI L-HEN L-HEG (-/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) x (-/ x -/) x (-/ x -/) x (-/ x -/) x (-/ x -/) x (-/ x -/) x (-/ x -/) x (-/ x -/) x (-/ x -/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) (-/) Publication A-CAA-EN-P -

17 Bulletin E IEC Load Switches, A Appropriate Dimensions Dimensions are shown in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Base Installation E-A E-A Switch Body with Metal Shaft Extension L-G L-G A (-/ -/) (-/ -/) E-A E-A/ E-A/ E-A/ L () (-/) (-/) (-/) Base and Front Installation For -pole switches, add in. to the "L" dimension. E with Auxiliary Contact Block Installed E with -Pole, Ground and Neutral Terminals Contacts N.. + N.C. N.. + N.C. M (/) (/) E- E-/ E-/ E-/ M. (/) (/). (/) (/) - Publication A-CAA-EN-P

18 Bulletin E IEC Load Switches, A Appropriate Dimensions Dimensions are shown in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Base Mounting E-A Thermoplastic Enclosures Complete Switches E-Y E-Y/ E-Y/ Poles Enclosures ABS Noryl and E-G E-G and L-G L-G E-G E-G and E-G E-G E-G E-G E-Y/ and E-G E-G Height A (-/) (-/) (-/) (-/) (-/) (-/) (-/) Width B (-/) (-/) (-/) (-/) (-/) (-/) (-/) M/M / mm M/M / mm Knockouts ØD PG/PG./. mm PG/PG./. mm PG/PG./. mm PG/PG./. mm PG/PG./. mm PG/PG./. mm PG/PG./. mm Mounting Holes E (-/) n Center (-/) n Center n Center (-/) (-/) F (-/) (-/) (-/) (-/) (-/) (-/) (-/) Empty enclosures not available for purchase. E-A units have knockout on each end. all others have knockouts on each end. A letter "M" in the catalog number indicates metric knockouts; the unit is otherwise supplied with PG knockouts. All mounting holes have a. mm (/ in. ) diameter. E-A / E-A / E-A / No. of Extensions With extension (-/) (-/) (-/) With extensions (-/) (-/) (-/) With extensions (-/) (-/) (-/) With extensions (-/) (-/) (-/) With extensions (-/) () (-/) With extensions (-/) (-/) (-/) When more than modules are used, attach the first one to the switch body using the screws supplied with the extension ( L-G). Depth H (-/) (-/) (-/) (-/) (-/) (-/) (-/) Publication A-CAA-EN-P -

19 Bulletin E IEC Load Switches, A Appropriate Dimensions Dimensions are shown in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. E Enclosed Switches with R Handles () / (.) dia. mtg. holes () / (.) dia. mtg. holes Cat. Nos. E-CA, E-FA, E-AA E-KA / (.) -/ (.) -/ (.) -/ (.) (.) () / (.) dia. mtg. holes Cat. Nos. E-CA, E-FA, E-AA Cat. Nos. E-CA, E-FA, E-AA () / (.) Dia. Mtg. Holes / (.) -/ (.) E-KA () - (.) Dia. Mtg. Holes () -/ () -/ () () -/ () E-DA, E-GA - Publication A-CAA-EN-P