GENERAL BUILDING AUTOMATION CATALOGUE. Product Overview

Transcription

1 GENERAL BUILDING AUTOMATION CATALOGUE Product Overview

2 Product overview SMARTEH BUILDING AUTOMATION PRODUCT LINE 1.1. Standards and provisions 1.2. Environment Written by SMARTEH d.o.o. Copyright , SMARTEH d.o.o. GENERAL BUILDING AUTOMATION CATALOGUE Document Version: V.03, April, LPC-2 PROGRAMMABLE CONTROLLERS 2.1. Controller configuration basics 2.2. Main modules 2.3. Network module 2.4. Communication modules 2.5. Digital input modules Voltage free digital inputs V DC digital inputs V AC digital inputs V AC digital inputs 2.6. Digital output modules Relay digital outputs Transistor 24 V DC digital outputs Triac V AC digital outputs 2.7. Analog modules Analog inputs & outputs 2.8. Dedicated modules Stepper motor and encoder Differential pressure module Special digital outputs Dimmer outputs Room modules 2.9. Intelligent peripheral modules Temperature & fan control panels Wireless control panels RFID access control panels Temperature, humidity and air quality sensors Infrared transceiver and remote control Switch panel Multisensors Wireless adapter

3 OPERATOR TERMINALS LCD PC based touch screen LCD PLC based touch screens 3.3. Modbus RTU Temperature control panels LRC-2 ROOM TEMPERATURE CONTROLLERS 4.1. Introduction to LRC Fan coil controller selection table Chilled beam controller selection table LRC network modules Connection of LRC network modules ACCESSORIES 5.1. Connection of intelligent peripheral modules 5.2. LON terminators 5.3. Access control equipment SENSORS 6.1. Temperature sensors 6.2. Magnetic sensors 6.3. Condensation, water leakage, occupancy detectors STANDALONE PRODUCTS 7.1. GSM commander GM Silent motor drive LMD Power supply modules SW & TOOLS 8.1. USB to serial RS-232 RS-485 adapter 8.2. LON line tester 8.3. Programming cables 8.4. Programming SW Smarteh IDE Smarteh xeye GSM Manager LCD Composer Modbus Tester & LRC Tester

4 Smarteh Building Automation Product Line Smarteh controllers are developed to provide building energy efficiency. On the other hand Smarteh automation systems are designed with special care to provide guest comfort. Openness & connectivity Modular configurations and communication possibilities allow you to create high performance and economical solution at the same time. Simplicity Smarteh controllers enables simple adjustment towards customer needs and demands. Effectiveness Parameterization is a candy for the integrators. It gives them possibility to simplify commissioning by making standard software for similar applications. On site commissioning is reduced to simple parameter settings. Comfort & economy We offer cost effective and innovative solutions to provide comfort and energy savings. In building automation many types of controls can be used. From classic light switches up to Smarteh color LCD touch button panels and touch screens. Energy savings are achieved by effective management of lighting, heating, air-conditioning, access control and other appliances, connected and controlled through our automation system. 1.1 STANDARDS & PROVISIONS LPC-2 LPC-3 LRC-2 EMC LVD EN :207+A1:2011, EN :2007, EN : 2006+A1:2009+A2:2009, EN :2013 IEC :2010 (3rd Ed.), IEC :2013 (1st Ed.) 1.2 ENVIRONMENT Temperature Relative humidity Protection class Operation Storage LPC-2 LPC-3 LRC-2 0 to 50 C -20 to 60 C max. 95%, no condensation IP 30 4 Smarteh Building Automation Product Line

5 LPC-2 Programmable Controllers

6 LPC-2 Programmable Controllers Longo Programmable Controller LPC-2 is open programmable logic controller for use in building automation, supervision and control solutions. Controller is easy to use and supports all five IEC programming languages (FBD, LD, SFC, ST, IL). Modular LPC-2 controller architecture offers many different configuration options and communication possibilities CONTROLLER CONFIGURATION BASICS Main control module is the heart of LPC-2 system. Its purpose is to execute application program and to exchange data with IO, communication and peripheral modules. The controller is powered directly from the main power supply ( V AC). 6 LPC-2 Programmable Controllers

7 2.2. MAIN MODULES MAIN MODULES LPC-2.MC8 LPC-2.MC9 Rated power supply Power consumption of main module V AC, 5060 Hz max. 24 W and bus supply Number of IO & communication up to 7 modules supported LON networking modules supported Number of intelligent peripheral modules up to 2 up to 16 supported (RFID, IR, LCD, VOC, wireless) Real time clock integrated Smarteh bus Smarteh bus Modbus TCPIP (Master & Slave) Integrated ports Modbus TCPIP (Slave) CANopen (Master & Slave) Modbus RTU (Master) CANopen (Master & Slave) Communication ports LON FT-10*, EnOcean* EnOcean* IR Optional modules IR DALIDSI master DALIDSI master GSM SMS Programming port Programming SW Programming standard USB USB, Ethernet (LAN, Internet)** Smarteh IDE IEC (FBD, LD, SFC, ST, IL) 90 x 53 x 77 mm * Network modules are used to extend networking capability of controller units. ** Programming is possible through LAN network or internet. LPC-2 Programmable Controllers 7

8 2.3. NETWORK MODULE LON Power supply Power consumption (bus) Communication port Communication protocol Connection Compliant to User defined Configuration SW LPC-2.NL2 from internal bus 0.5 W 90 x 18 x 60 mm LonWorks LonTalk screw type LON TPFT-10, 78 kbps LON interface file *.xif LonMaker 2.4. COMMUNICATION MODULES IR GSM DALIDSI ENOCEAN For the IR (infra-red) and WA1 (wireless) communication modules see section Intelligent Modules Power supply Power consumption (bus) Functional description Connection Communication protocol Functionality Compliant to Limitations Configuration SW LPC-2.C05 1 W wireless GSM SMS messaging masterslave GSM900 & GSM1800 up to 9 GSM nrs. (users) GSM Manager 90 x 53 x 60 mm LPC-2.DL1 LPC-2.EO1 from internal bus 2 W 0.5 W communication extension screw type wireless DALI or DSI EnOcean master & power supply transceiver DALI & DSI MHz EnOcean radio up to 64 slave devices various input & output devices WinEtel, LPC Tester 90 x 18 x 60 mm 8 LPC-2 Programmable Controllers

9 2.5. DIGITAL INPUT MODULES Voltage free digital inputs VOLTAGE FREE (DRY) CONTACTS DIGITAL INPUTS LPC-2.DI1 LPC-2.DI5 LPC-2.I16 Number of inputs Voltage 24 V DC jumper selectable in 2 Voltage source from internal bus groups of 8 inputs: internal bus or external Input threshold resistance On: R < 5 kω, Off: R > 40 kω Power consumption (bus) 0.5 W 1.5 W 2.5 W 90 x 18 x 60 mm 90 x 53 x 60 mm V DC digital inputs 24 V DC DIGITAL INPUTS LPC-2.DI3 LPC-2.DI6 LPC-2.I16 Number of inputs Voltage 24 V DC Voltage source Input resistance Input threshold Power consumption (bus) 2.7 kω 90 x 18 x 60 mm jumper selectable in 2 groups external of 8 inputs: internal bus or external 3.6 kω 4.7 kω On: U > 15 V, Off: U < 2 V 0.25 W 90 x 53 x 60 mm LPC-2 Programmable Controllers 9

10 V AC digital inputs 24 V AC DIGITAL INPUTS Number of inputs Voltage Voltage source Input resistance Input threshold Power consumption (bus) LPC-2.DI V AC external 2.7 kω On: u > 15 V, Off: u < 2 V 0.25 W 90 x 18 x 60 mm LPC-2.DI kω 90 x 53 x 60 mm V AC digital inputs 230 V AC DIGITAL INPUTS LPC-2.DI2 LPC-2.DI8 Number of inputs 1 8 Voltage 230 V AC Voltage source Input resistance Input threshold 72 kω On: u > 150 V, Off: u < 20 V external 200 kω On: u > 60 V, Off: u < 22 V Power consumption (bus) 90 x 18 x 60 mm 0.25 W 90 x 53 x 60 mm 10 LPC-2 Programmable Controllers

11 2.6. DIGITAL OUTPUT MODULES Relay digital outputs RELAY DIGITAL OUTPUTS Number of outputs Output type Switching power (resistive load per output channel) Power consumption (bus) LPC-2.DO2 LPC-2.DO3 LPC-2.DO6 LPC-2.DO8 1 8 relay, NO relay, NC relay, NO relay, NC 230 V AC3 A, 30 V DC3 A, 48 V DC1 A For inductive loads use of suppression circuits is recommended 0.5 W 90 x 18 x 60 mm 2.75 W 90 x 53 x 60 mm Transistor 24 V DC digital outputs TRANSISTOR DIGITAL OUTPUTS Number of outputs Output supply Output type Voltage Switching power on output Max. load capacitancechannel Power consumption (bus) LPC-2.DO1 LPC-2.O bus powered bus powered ext. power supply transistor output 24 V DC 100 ma, short circuit proof, output 500 ma per channel, 100 ma per module powered from bus only 4 A per module 10 μf 0.75 W 3 W 1 W 90 x 18 x 60 mm 90 x 53 x 60 mm LPC-2 Programmable Controllers 11

12 Triac V AC digital outputs V AC DIGITAL OUTPUTS Number of outputs Output type Voltage Switching power on output channel Switching frequency Power consumption (bus) LPC-2.DO4 LPC-2.DO9 LPC-2.DO zero crossing triac V AC (external power supply) A per channel A per channel, 1000 W per module 1 Hz 0.25 W 0.75 W 1 W 90 x 18 x 60 mm 90 x 53 x 60 mm 12 LPC-2 Programmable Controllers

13 2.7. ANALOG MODULES Analog inputs & outputs TEMPERATURE ANALOG INPUT ANALOG INPUT & ANALOG OUTPUT Number of inputs Number of outputs Input output type individually jumper selectable Type of inputs Input connection Input resistance Input resolution Measuring error of full scale Type of outputs Output resolution of full scale Output accuracy Power supply Power consumption (bus) LPC-2.A02 2 thermocouples E, J, K, N, R, S, T, NTC 10k, Pt100, Pt1000 & Ni1000 passive 0.1 C < ±1 % 2 W 90 x 18 x 60 mm from internal bus voltage V 6 2 passive active, jumper selectable reference: GND, 24 V DC or 10 V DC 10.7 kω 182 Ω 3900 levels of full scale < ±0.5 % < ±0.1 % V < ±0.1 % LPC-2.A levels 5 W 90 x 53 x 60 mm current ma ma < ±0.3 % ANALOG OUTPUT MODULES Number of outputs Output type individually selectable Type of outputs Output resolution of full scale Output accuracy of full scale Load resistance Power supply Power consumption (bus) LPC-2.A03 LPC-2.A voltage current voltage current V ma V ma 5000 levels ±2 % ±1 % R > 500 Ω R < 500 Ω R > 500 Ω R < 500 Ω from internal bus 1 W 5 W 90 x 18 x 60 mm 90 x 53 x 60 mm LPC-2 Programmable Controllers 13

14 2.8. DEDICATED MODULES Stepper motor and encoder STEPPER MOTOR OUTPUT MODULE WITH ENCODER INPUT Number of outputsinputs Output type (motor) Output power supply Output rated load Input type (encoder) Input frequency Input power supply Power consumption (bus) LPC-2.ED1 4 (1 step motor) 6 (1 encoder) bipolar stepper motor drive (A, B, C, D) internal (bus) 24 V or external V DC, jumper selectable up to 500 ma per channel with external power supply TTL with 4k7 Ω pull up to 5 V DC or RS-485 with 120 Ω termination, jumper selectable (A, A, B, B, Z, Z) up to 10 khz internal (bus), selectable 5 V DC or 12 V DC 1 W, no load connected 90 x 53 x 60 mm Differential pressure module DIFFERENTIAL PRESSURE MODULE FOR AIR PRESSURE OR FLOW (VAV) MEASUREMENT Number of differential pressure Pressure measurement range differential, non-polluted atmosphere Pressure measurement error Pressure measurement pipes Pressure measurement resolution Power consumption (bus) LPC-2.VV1 LPC-2.VV Pa Pa < 0.5 % of full scale internal diameter mm rubber, plastic, silicone, levels per full scale 5000 levels per full scale 0.5 W 90 x 53 x 60 mm 14 LPC-2 Programmable Controllers

15 Special digital outputs ADJUSTABLE VOLTAGE OUTPUT DOOR LOCK OUTPUT Number of outputs Output type Output power supply Voltage Output load Switching frequency Power consumption (bus) LPC-2.SO2 LPC-2.DOL 1 adjustable voltage high voltage start pulse, then hold from internal bus V DC adjustable in 1 V step pulse: V DC using DIP switch hold: V DC coil resistance 20 Ω, please check 0.7 A, 9 W selected door lock for compatibility T > 5 s 9 W 2 W 90 x 18 x 60 mm Dimmer outputs DIMMER OUTPUT Number of outputs Output type Output power supply Rated load voltage Rated load current Power consumption (bus) LPC-2.DD2* LPC-2.DD4 1 4 triac current drive for dimmable lights or fans external V AC 5060 Hz up to 1.5 A up to 7 A 0.25 W 1 W 90 x 18 x 60 mm * LPC-2.DD2 is compatible with LPC-2.MC8 only. LPC-2 Programmable Controllers 15

16 Room modules ROOM CONTROL DIGITAL INPUT AND OUTPUT MODULE Number of inputs Number of outputs Type of inputs Digital inputs voltage Digital inputs threshold resistance Type of outputs Triac output voltage Output current per triac channel Max. sum triac output load Door lock output voltage Door lock output max. load Power supply Power consumption (bus) LPC-2.R01 LPC-2.R02 6 digital 2 analog, 3 digital analog, 4 digital, 1 power supply 6 voltage free, 1 analog V 6 voltage free (dry) contact inputs 1 analog V or NTC 24 V DC internally supplied On: R < 5 kω, Off: R > 40 kω 7 triac AC make contact in two 4 triac AC make contact in two groups (3 + 1) groups (5 + 2), 1 door lock DC output 4 analog V, 1 power supply 24 V ACDC V AC 0.9 A group1: 0.9 A, group2: 3 A 1000 W pulse: V DC hold: V DC 20 Ω from right internal bus external power supply for triac output 4 W max 9 W 90 x 53 x 60 mm 16 LPC-2 Programmable Controllers

17 2.9. INTELLIGENT PERIPHERAL MODULES Temperature & fan control panels TEMPERATURE CONTROL TEMPERATURE & FAN CONTROL Basic functionality Room temperature sensor Light intensity sensor Temperature set Temp. set point display Fan speed selection Fan set point display Fan support 2 and 4 pipe system Frost protection Doorwindow open switch Economy operating mode Housing color Mounting Communication connector Power supply Power consumption LPC-2.P02 LPC-2.P01 control panel and regulator for room heating andor cooling built in, accuracy ±1 C used for automatic LED intensity adjustment, can also be used in application SW 2 push buttons (WARMER, COOLER) 18 green LED 12 green LED 1 push button 4 green LED 3 speed or step less fan yes < 5 C supported supported white wall mount Dubox (splitters and interconnection cables needed) over communication cable 1 W 110 x 80 x 17 mm LPC-2 Programmable Controllers 17

18 TEMPERATURE CONTROL TEMPERATURE & FAN CONTROL Basic functionality Room temperature sensor Light intensity sensor Temperature set Temp. set point display Fan speed selection Fan set point display Fan support Piping system Frost protection Doorwindow open switch Economy operating mode Housing color Mounting Communication connector Power supply Power consumption LPC-2.P02V LPC-2.P01V control panel and regulator for room heating andor cooling built in, accuracy ±1 C used for automatic LED intensity adjustment, can also be used in application SW 2 push buttons (WARMER, COOLER) 10 blue LED 1 push button 4 blue LED 3 speed or step less fan 2 or 4 pipe systems supported < 5 C supported supported black or white + customer selectable front plate** flush mount* RJ-12 (splitters and interconnection cables needed) over communication cable 0.5 W 65 x 47 x 25 mm 18 LPC-2 Programmable Controllers

19 LCD TEMPERATURE CONTROL LCD TEMPERATURE & FAN CONTROL Touch buttons + Temp. sensor Push buttons + Temp. sensor Touch btn + Temp. + RH sensor Push btn + Temp. + RH sensor Basic functionality Measuring accuracy Room temperature display Light intensity sensor Temperature set Temp. set point display Fan speed selection Fan set point display Fan support 2 and 4 pipe system support Frost protection Doorwindow open switch Economy operating mode Front plate color Mounting Communication connector Power supply Power consumption AVAILABLE VERSIONS LPC-2.DP2 LPC-2.DP1 LPC-2.DP2B LPC-2.DP1B LPC-2.DP2H LPC-2.DP1H LPC-2.DP2BH LPC-2.DP1BH LCD control panel and regulator for room heating andor cooling temp. range C: accuracy ±1 C, RH range % RH, accuracy < 5 % of full scale numeric, on LCD, resolution 0.5 C used for automatic LCD intensity adjustment, can also be used in application SW touch buttons 2 buttons**** numeric and graphic, on LCD*** 2 buttons graphic, on LCD 3 speed or step less fan yes < 5 C supported supported black or white + customer selectable front plate** flush mount* RJ-12 (splitters and interconnection cables needed) over communication cable 1 W 65 x 49 x 29 mm Noted: Background picture can be changed using Smarteh LCD Composer software and LSA-2.USB adapter. *Frame is not included. Smarteh has verified following lines of modular frames to be compatible with LPC-2.DPxxx and LPC-2.POxV modules: Gewiss Playbus, System Vimar Plana, Idea Ave Tem Pure, Line, Soft Master Bticino - Living, Light **Color of the front plate can be done in different colors. ***Temperature set point is temporary displayed while LCD display is in SET mode. ***Numeric value of temperature can be displayed or hidden - user programmable. ****To change settings on LCD panel with touch buttons press any button for approximately one second, to switch LCD to SET mode. LPC-2 Programmable Controllers 19

20 Wireless control panels LCD TEMPERATURE CONTROL LCD TEMPERATURE & FAN CONTROL LCD MULTIPURPOSE CONTROL SWITCH Basic functionality Measuring range Measuring accuracy Room temperature display Light intensity sensor Temperature set Temp. set point display Fan speed selection Fan set point display Fan support 2 and 4 pipe system Frost protection Doorwindow open mode Economy operating mode Housing color Mounting Communication protocol Power supply Battery indicator LPC-2.WP2H LPC-2.WP1H LPC-2.WT1 LCD color display with 4 LCD temperature control panel with RH control buttons, picture on LCD can be adapted to the measurement for heating andor cooling customer needs, and also functionality of the buttons built in, temp: C, RH: % temp. range C: acc. ±1 C, RH range % RH, acc. < 5 % of full scale numeric, on LCD, temp. res. 0.5 C, RH resolution 1% used for automatic LCD intensity adjustment, can also be used in application SW push buttons 2 push buttons 4 push buttons* numeric and graphic, on LCD** 2 push buttons graphic, on LCD 3 speed or step less fan yes < 5 C supported supported white wall mount wireless M-BUS (868 MHz) LPC-2.WA1 adapter is necessary, see section pcs. AA battery type (not included)*** yes 115 x 72 x 18 mm *Buttons can be used for different purpose (onoff switch) **Temperature set point is temporary displayed, while LCD display is in SET mode. **Numeric value of temperature can be displayed or hidden user programmable. ***Expected battery life > 1 year, depending on battery capacity 20 LPC-2 Programmable Controllers

21 RFID access control panels ACCESS CONTROL RFID CARD READERS ACTIVE RFID CARD HOLDER LPC-2.ID3 LPC-2.ID1 LPC-2.ID2 Basic functionality identification, door unlocking etc. hotel room door unlocking and room status signalization RFID card holder, presence identification and room status setting RFID reader type EM EM Marin (Manchester 64 read only) 125 khz OK (access granted) Signalization LEDs OK (access granted) FAULT (access denied) FAULT (access denied) OCCUPIED DO NOT DISTURB DO NOT DISTURB ROOM SERVICE ROOM SERVICE SOS Acoustic signalization short beep: OK long beep: FAULT short beep: OK long beep: FAULT Push buttons DO NOT DISTURB ROOM SERVICE Digital input safety switch on back of the reader safety switch on back of the reader mechanical switch for card presence Relay output Housing color Mounting Communication connector Power supply Power consumption NO, 30 V DC, 2 A white wall mount Dubox (splitters and interconnection cables needed) over communication cable 0.5 W 110 x 80 x 17 mm LPC-2 Programmable Controllers 21

22 ACCESS CONTROL RFID CARD READERS ACTIVE RFID CARD HOLDER LPC-2.ID3V LPC-2.ID1V LPC-2.ID2V Basic functionality identification, door unlocking etc. hotel room door unlocking and room status signalization RFID card holder, presence identification and room status setting RFID reader type EM EM Marin (Manchester 64 read only) 125 khz OK (access granted) Signalization LEDs OK (access granted) FAULT (access denied) FAULT (access denied) OCCUPIED DO NOT DISTURB DO NOT DISTURB ROOM SERVICE ROOM SERVICE SOS Acoustic signalization short beep: OK long beep: FAULT short beep: OK long beep: FAULT Buttons functions Digital input DO NOT DISTURB ROOM SERVICE mechanical switch for card presence Housing color Mounting Communication connector Power supply Power consumption black or white + customer selectable front plate** flush mount* RJ-12 (splitters and interconnection cables needed) over communication cable 0.5 W 65 x 49 x 29 mm 22 LPC-2 Programmable Controllers

23 ACCESS CONTROL RFID CARD READERS ACTIVE RFID CARD HOLDER Basic functionality RFID reader type EM Marin (touch buttons) LPC-2.CR1 LPC-2.CA1 LPC-2.CH1 identification, door unlocking hotel room door unlocking and room status signalization RFID card holder, presence identification and room status setting EM EM Marin (Manchester 64 read only) HITAG2 (UID read only) 125 khz Available versions LPC-2.CR1 LPC-2.CA1 LPC-2.CH1 RFID reader type MIFARE (push buttons) ISOIEC MIFARE Available versions LPC-2.CR1M LPC-2.CA1M LPC-2.CA1MB (ring bell) LPC-2.CH1M OK (access granted) FAULT (access denied) Signalization LEDs OK (access granted) FAULT (access denied) OCCUPIED DO NOT DISTURB DO NOT DISTURB ROOM SERVICE ROOM SERVICE SOS Acoustic signalization short beep: OK long beep: FAULT short beep: OK long beep: FAULT Buttons functions RING BELL (only: CA1MB) DO NOT DISTURB ROOM SERVICE Housing color Mounting Communication connector Power supply Power consumption black or white + customer selectable front plate** flush mount* RJ-12 (splitters and interconnection cables needed) over communication cable 0.5 W 65 x 49 x 29 mm *Frame is not included. Smarteh has verified following lines of modular Gewiss Playbus, System Tem Pure, Line, Soft frames to be compatible with LPC-2.Cxx and LPC-2.IDxV modules: Vimar Plana, Idea Master Ave Bticino - Living, Light **Color of the front plate can be done in different colors. LPC-2 Programmable Controllers 23

24 ACCESS CONTROL RFID CARD READER FOR OUTDOOR USE Basic functionality RFID reader type Signalization LEDs Acoustic signalization Housing color Mounting Communication connector Power supply Power consumption LPC-2.CR2 LPC-2.CR2M identification, door unlocking, etc. EM EM Marin (Manchester 64 read only) HITAG2 (UID read only) 125 khz OK (access granted), FAULT (access denied) short beep: OK, long beep: FAULT black panel on white housing outdoor use, IP65 RJ-12 over communication cable 0.5 W 120 x 80 x 60 mm MIFARE Classic 1K comply to ISOIEC Type A (13.56 MHz) Temperature, humidity and air quality sensors TEMPERATURE, RELATIVE HUMIDITY (RH) AND AIR QUALITY (VOC) SENSOR Basic functionality Temp. measurement range Measuring accuracy LPC-2.TH1 temperature and RH measurement C temperature range C: accuracy ±1 C RH range % RH, accuracy < 5 % of full scale LPC-2.AQ1 VOC measurement CO2 equivalents: ppm air quality measurement range ppm VOC Detection substances (LPC-2.AQ1) Housing color Mounting Communication connector Power supply Power consumption Acetone, Ethanol, Isoprene, CO2, Nonanal, Decanal, Methane, Hydrogen, Limonene, Alcohols, Esters, CO, Unburnt hydrocarbons, Benzene, Phenols, Humidity, Formaldehyde, Ketone, Styrene... black or white + customer selectable front plate** flush mount* RJ-12 (RS-485) over communication cable 0.5 W 65 x 47 x 25 mm (3M) 24 x 48 x 34 mm (1M) 24 LPC-2 Programmable Controllers

25 Infrared transceiver and remote control IR TRANSCEIVER IR REMOTE CONTROL Basic functionality Communication protocol Housing color Mounting Communication connector Power supply Power consumption LPC-2.IR2V temperature, relative humidity, light intensity measurement programmable IR transceiver, IR receiver for LPC-2.RC1S, various IR protocols black or white + customer selectable front plate** flush mount* RJ-12 (splitters and interconnection cables needed) over communication cable 0.5 W 24 x 48 x 52 mm LPC-2.RC1S IR remote control for building automation, designed to be used with all Smarteh intelligent peripherial modules that have an IR receive function RC-5 4x AAA batteries 60 x 179 x 16.5 mm Switch panel LCD CONTROL SWITCH Basic functionality Buttons Housing color Mounting Communication connector Power supply Power consumption LPC-2.DT1B LCD color display with 4 control buttons, picture on LCD can be adapted to the customer needs, and also functionality of the buttons 2+2 push black or white + customer selectable front plate** flush mount* RJ-12 (splitters and interconnection cables needed) over communication cable 1 W 65 x 49 x 29 mm *Frame is not included. Smarteh has verified following lines of modular frames to be compatible with LPC-2.DTxx, LPC-2.TH1 and LPC-2.AQ1 modules: **Color of the front plate can be done in different colors. Tem Pure, Line, Soft Gewiss Playbus, System Master Vimar Plana, Idea Ave Bticino Living, Light LPC-2 Programmable Controllers 25

26 Multisensors CO2 SENSOR, PIR SENSOR, LUX SENSOR, VOC SENSOR, IR TRANSCEIVER Basic functionality Communication protocol Housing color Mounting Connection cable Power supply Power consumption LPC-2.SM5 LPC-2.SM6 LPC-2.SM7 CO2 & light intensity measurement, occupancy detection, IR transceiver VOC, CO2 & light intensity measurement, occupancy detection, IR transceiver programmable IR transceiver IR receiver for LPC-2.RC1S various IR protocols white or black housing and cable mounting with integrated magnets or screws 2 m length (RJ-12 male) over communication cable 0.5 W 40 x 109 x 25 mm IR matrix sensor, light intensity measurement, IR transceiver Wireless adapter WIRELESS ADAPTER Basic functionality Communication protocol Housing color Mounting Communication connector Power supply Power consumption LPC-2.WA1 adapter for Wireless LCD control panels signal range up to 30 m 16 sub networks channel wireless M-BUS (868 MHz) Black RJ-12 (splitters and interconnection cables needed) over communication cable 0.5 W 80 x 64 x 26 mm 26 LPC-2 Programmable Controllers

27 Operator Terminals

28 LCD PC BASED TOUCH SCREEN 7 LCD PC BASED TOUCH SCREEN Power supply Voltage Power consumption Current Material Front plate DETAILED DESCRIPTION Type Colors Screen Resolution Size Keyboard type Signalization Operating system (supported) Processor Samsung S5PV210 Memory Real time clock Communication On board connectors Multimedia support OS & app. download. Included SW LTS-2.PC3 5.2 V DC (optional APS-1 power supply available) 1.2 A aluminum, painted in Gray (RAL 9006) or Mate Black (RAL 9004) 210 x 160 x 45 mm 7 TFT, 16:9, capacitive Touch Screen 64 k 800 x 480 pixels 154 x 92 mm USB keyboard & mouse supported buzzer, LEDs on back Windows CE 6.0 (Linux, Android) 1 GHz 512 MB RAM on board SD card interface (SD 4 GB included) on board, battery backup CR1220, 3 V 10100M Ethernet (RJ-45 plug) 1 x RS-232 (DB9 plug) 2 x RS-485 (2 x 4pin disconnectable screw terminals) audio input interface stereo audio output interface CMOS camera interface USB camera supported USB, RS-232, SD CARD Movicon Win CE, VNC 28 Operator terminals

29 LCD PLC BASED TOUCH SCREENS 7 LCD PLC BASED TOUCH SCREENS Basic functionality general automation usage ideal solution for building automation Power supply V DC Power consumption Material LPC-3.GOT.001 aluminum, painted in Gray (RAL 9006) or Mate Black (RAL 9004) max. 5 W LPC-3.GOT.011 glass, painted in Black (RAL 9005) DETAILED DESCRIPTION Screen Operating system Processor Memory Real time clock Communication ports Programming SW 210 x 160 x 46 mm 220 x 170 x 47 mm 7 LCD display with resistive touch screen 800 x 480 pixels 154 x 92 mm Linux SOC ARM9 454 MHz 256 MB DDR2, 512 MB SLC NAND on board, with super capacitor Modbus RTU (Master) Modbus TCPIP (Master Slave) CANopen (Master Slave) Smarteh IDE 7 LCD display with capacitive touch screen 800 x 480 pixels 154 x 92 mm Operator terminals 29

30 3.3. MODBUS RTU TEMPERATURE CONTROL PANELS LCD TEMPERATURE CONTROL LCD TEMPERATURE & FAN CONTROL Touch buttons + Temp. sensor Touch btn + Temp. + RH sensor Basic functionality Measuring accuracy Room temperature display Light intensity sensor Temperature set Temp. set point display Fan speed selection Fan set point display Fan support 2 and 4 pipe system support Frost protection Doorwindow open mode Economy operating mode Housing color Mounting Communication connector Supported protocols Power supply Power consumption AVAILABLE VERSIONS LMP-1.MP2 LMP-1.MP1 LMP-1.MP2H LMP-1.MP1H LCD control panel nad regulator for heating andor cooling. temp. range C: accuracy ±1 C, RH range % RH, accuracy < 5 % of full scale numeric, on LCD, resolution 0.5 C used for automatic LCD intensity adjustment, can also be used in application SW touch buttons 2 touch buttons**** numeric and graphic, on LCD*** 2 touch buttons graphic, on LCD 3 speed or step less fan yes < 5 C supported supported black or white + customer selectable front plate** flush mount* RJ-12 (splitters and interconnection cables needed) Modbus RTU (RS-485) V DC 1 W 65 x 49 x 29 mm Note: Background picture can be changed using Smarteh LCD Composer software and LSA-2.USB adapter. *Frame is not included. Smarteh has verified following lines of modular Gewiss Playbus, System Tem Pure, Line, Soft frames to be compatible with LMP-1.MPxx module: Vimar Plana, Idea Master Ave Bticino - Living, Light **Color of the front plate can be done in different colors. ***Temperature set point is temporary displayed while LCD display is in SET mode. ***Numeric value of temperature can be displayed or hidden user programmable. ****To change settings on LCD panel with touch buttons press any button for approximately one second, to switch LCD to SET mode. 30 Operator terminals

31 LRC-2 Room Temperature Controllers

32 LRC-2 Room Temperature Controllers LRC stands for Longo Room Control and it is intended to be used for room temperature control INTRODUCTION TO LRC-2 LRC-2 products are well-suited for a low cost solutions where simple regulation of heating and cooling is required. LRC-2 control systems can be adopted in a number of different ways to control fan coils, convectors (FS type), chilled beams, floor heating or radiators (CS type). Control system is composed of InputOutput unit (IO), Control Panel unit (CP) and interconnection cable (IC). LRC-2 system can be used in standalone or network configuration. For networking, use of network adapter is required. The module is powered directly from the 230 V AC mains power supply. Control panel has integrated functions and settings, which allow adaptation to the selected heatingcooling device. Settings can be performed by using PC. Control panels can be made in different outfits and colors. 32 LRC-2 Room Temperature Controllers

33 Fan coil controller selection table LED TEMPERATURE & FAN CONTROL LCD TEMPERATURE & FAN CONTROL FAN COIL CONTROLLER Control panel mounting Color Room temperature Room temp. set point 3 speed and auto fan set Temp. set point display Selected fan speed display 2 and 4 pipe system support Frost protection function Economy function - saving Light intensity sensor LEDLCD light intens. control Interconn. without network Interconn. with networking LRC-2.FS1 LRC-2.FS1-D wall mount flush mount white whiteblack measured measured & displayed 2 push buttons 2 touch buttons sensors 1 push button 2 touch buttons sensors LED bar graph numerical and graphical LED bar graph graphical yes yes yes yes automatic dimming in dark environment (low intensity at night) select cable SIC4-7 select cable ICM-7 select cable SIC6-7 select cable SND x 80 x 17 mm 65 x 49 x 29 mm FAN COIL CONTROLLER INPUT & OUTPUT UNIT FAN COIL IO Basic functionality Power supply Power consumption with no load Balcony doorwindow input Condensation sensor input Coolhot water valve output 3 speed fan motor output Network support LRC-2.FS1 IO temperature room control using fan coils or convectors 230 V AC, 5060 Hz 3 W 90 x 53 x 77 mm yes yes 230 V AC, 6 A 230 V AC, 500 VA order network module LRC-1.NE1 or LRC-1.NE2 or LRC-1.NL1 or LRC-1.NR1 + splitter SPL1 + cable SND6-7 LRC-2 Room Temperature Controllers 33

34 Chilled beam controller selection table LED TEMPERATURE LCD TEMPERATURE CHILLED BEAM CONTROLLER Control panel mounting Color Room temperature Room temp. set point Temp. set point display 2 and 4 pipe system support Frost protection function Economy function - saving Light intensity sensor LEDLCD light intens. control Interconn. without network Interconn. with networking LRC-2.CS1 LRC-2.CS1-D wall mount flush mount white whiteblack measured measured & displayed 2 push buttons 2 touch buttons LED bar graph numerical and graphical yes yes yes yes automatic dimming in dark environment (low intensity at night) order cable SIC4-7 select cable ICM-7 order cable SIC6-7 order cable SND x 80 x 17 mm 65 x 49 x 29 mm CHILLED BEAM CONTROLLER INPUT & OUTPUT UNIT CHILLED BEAM IO Basic functionality Power supply Power consumption with no load Balcony doorwindow input Condensation sensor input Coolhot water valve output Network support LRC-2.CS1 IO temperature room control using chilled beams, floor heating or radiators 230 V AC, 5060 Hz 3 W 90 x 53 x 77 mm yes yes 230 V AC, 6 A order network module LRC-1.NE1 or LRC-1.NE2 or LRC-1.NL1 + LRC-1.NR1 + splitter SPL1 + cable SND LRC-2 Room Temperature Controllers

35 LRC network modules NETWORK MODULES Power supply Power consumption Communication port Communication protocol Connection Compliant to Nr. of controllers supported LRC-1.NE1 LRC-1.NE2 LRC-1.NL2 internally supplied from LRC < 3 W 90 x 18 x 60 mm 90 x 53 x 60 mm Ethernet Modbus TCP slave RJ-45 Ethernet Modbus TCP 2 x RJ-45 LonWorks LonTalk 2 x screw type Ethernet II and IEEE Base5, 10Base2 10BaseT, 10 Mbps LON TPFT-10, 78 kbps single LRC controller two LRC controllers Power supply Power consumption Communication port Communication protocol Connection Compliant to Nr. of controllers supported LRC-1.NL1 LRC-1.NR1 internally supplied from LRC < 3 W 90 x 18 x 60 mm 90 x 18 x 60 mm LonWorks RS-485 LonTalk Modbus RTU screw type screw type LON TPFT-10, 78 kbps Modbus RTU single LRC controller single LRC controller Connection of LRC network modules CONNECTION CABLE Functionality Compatibility Communication connector Dimensions SND6-7 connection of LRC-1.Nxx communication module to LRC-2 IO unit LRC (LONGO room controller) network RJ-12 to RJ-12 7 m (other length to be specified) LRC-2 Room Temperature Controllers 35

36 Accessories

37 Accessories 5.1. CONNECTION OF INTELLIGENT PERIPHERAL MODULES RJ-12 CONNECTION CABLE DUBOX RJ-12 CONNECTION CABLE Functionality SSK ICM-7 RIC6-7 interconnection cable for flush mount SIC4-7 SIC6-7 interconnection cable for wall mount Compatibility Communication connector Dimensions LPC, LRC: not for network LRC: network available LPC, LRC: not for network LRC: network available RJ-12 to RJ-12 RJ-12 to Dubox 0.5 m 7 m (other length to be specified) SPLITTER 12 SPLITTER 18 SPLITTER 13 Functionality Compatibility Communication connector SPL-1 SPL-2 SPL-5 used to connect up to 2 intelligent peripheral modules to Main module used to connect up to 8 intelligent peripheral modules to Main module LPC-2 & LRC-2 used to connect up to 3 intelligent peripheral modules to Main module RJ x 30 x 27 mm 70 x 54 x 32 mm 36 x 32 x 27 mm Accessories 37

38 5.2. LON TERMINATORS LON TERMINATORS Basic functionality Compatibility Topology Connection LBT-1 LBT-2 LBT-3 LFT-1 LFT-2 LFT-3 LON terminators are used to provide electrical termination of twisted pair. TPFT-10 bus bus bus FREE FREE FREE RJ-45 flying wire RJ-12 RJ-45 flying wire RJ ACCESS CONTROL EQUIPMENT RFID IDENTIFICATION CARD ELECTRICAL DOOR LOCK Basic functionality RFID Standard Compatibility Options CRD-2 RFID identification card EM khz MIFARE Classic 1K comply to ISOIEC Type A (13.56 MHz) all RFID intelligent modules custom printing available credit card size, 0.84 mm thick EKS-X electromagnetic door lock LPC-2.DOL, LPC-2.R01 suitable face plates available micro switch option available 70.8 x 20.5 x 29.5 mm 38 Accessories

39 Sensors

40 Sensors 6.1. TEMPERATURE SENSORS TEMPERATURE SENSOR Basic functionality Measuring range Rated resistance Compatibility with LPC-2 Connection NTC-1 NTC-4 NTC-5 temperature measuring room temp. measurement C C 10 kω ±5 %, EPCOS part B57891, 4901 LPC-2.A02, LPC-2.A01 2 wires flame retardant, 2 wires flame retardant, halogen free, 0.7 m halogen free, 4 m RJ-12 Housing Dimensions PA66 with 25 % PA66 with 25 % glass glass fibers fibers, waterproof 14.5 x 10 x 42 mm ϕ6 x 30 mm flush mount 24 x 48 x 34 mm 6.2. MAGNETIC SENSORS REED RELAY SWITCH Basic functionality Connection cable Dimensions MGK-3 WIRELESS SOLAR POWERED SWITCH reed relay switch, detecting position, such as doors closed, windows closed etc. 1 m halogen free, flame retardant cable Wireless - Enocean ϕ9 x 19 mm, ϕ19 x 29 mm - 40 Sensors

41 6.3. CONDENSATION, WATER LEAKAGE, OCCUPANCY SENSORS CONDENSATION SENSOR WATER LEAKAGE SENSOR Basic functionality LCS-1.C01 LCS-1.C02 LWD-2 sensing condensation on the surface water leakage sensor of cooling elements Behavior output is active (conducting) if no condensation output is active (conducting) in the absence of water Sensitivity Ambient temperature Supply voltage Local signalization Compatibility Connection wires Connection cable Mounting adjustable (trimmer) electrodes submersed into water C V AC DC V DC V DC red LED: condensation, green LED: no green LED: power OK condensation Green LED: no water see user manual for connection diagrams 4 wire cable 2 wire cable 2 wire cable 2 m or 7 m 4 m on pipe with spring provided vertical horizontal 44 x 45 x 11.5 mm 60 x 40 x 15 mm Sensors 41

42 OCCUPANCY SENSORS Basic functionality Behavior Ambient temperature Supply voltage Local signalization Compatibility Connection wires Connection cable Mounting LOC-1 LOC-2 sensor for detecting moving person output is active if moving person is present C V AC DC V DC red LED: moving person is present, red LED: moving person is present green LED: no moving person see user manual for connection diagrams 4 flying wires 2 flying wires 2 m mounting with integrated magnets or screws 44 x 45 x 11.5 mm 42 Sensors

43 Standalone Products

44 Standalone Products 7.1. GSM COMMANDER GM2 GSM COMMANDER GM2 is designed for the remote alarming and control, using SMS messages via GSM network. With GSM COMMANDER GM2 you can control two electrical devices and monitor the status of two sensors with a common mobile phone. Apart from the GM2 you need a valid SIM card of a network provider. The typical purpose of GM2 is: sending commands for remote switching of one or two electric devices from common mobile phone using simple SMS messages, receiving automatically generated SMS alarms from one or two connected sensors to a mobile phone. There are also two versions of GM2, which are application specific: GM2-V is used for remotely opening of garage or backyard door or barrier gate by initiating phone call to the GSM number of GM2. GM2-A is used for vehicle monitoring - burglary alarm. GSM COMMANDER Basic functionality Rated power supply Backup power supply Power consumption Communication protocol Security GSM SIM compatibility Antenna Antenna extension cable Configuration GM2 remote control for 2 devices (outputs), monitoring 2 digital inputs and 1 analog input for NTC temp. control measurement 230 V AC, 5060 Hz optional: Pb accu. 12 V, app 1.3 Ah, accu. is recharged from the GM W SMS commands and alarms (text messages) and 1x ring command (voice call) access limited to list of registered users, based on phone numbers dual band MHz PIN checking must be disabled on the SIM card included in delivery to be ordered separately: AC1 (1 m), AC4 (4 m), AC10 (10 m) through cell phone and SMS commands or using GSM manager 95 x 53 x 77 mm 44 Standalone Products

45 7.2. SILENT MOTOR DRIVE LMD-2 LMD-2 is stepless motor drive for speed regulation, which adjusts the speed of the motor in a way that motor does not produce audible noise. Main usage of this unit is in HVAC (Heating, Ventilating, and Air Conditioning) applications, where variable fan speed with low noise is required. SILENT MOTOR DRIVE FOR FAN SPEED CONTROL Basic functionality Power consumption Rated load voltage Rated load current Control mode setting Control modes Connection type Ambient temperature LMD-2 variable voltage output (PWM modulated with frequency of 20 khz) 250 VA (maximum load) 230 V AC, 5060 Hz 1.3 A jumper selectable V, ma, external 10k potentiometer, internal potentiometer screw type connectors C 93 x 82 x 47 mm 7.3. POWER SUPPLY MODULES The power supply modules can be used to supply voltage to Smarteh s equipment and also for powering third party devices like sensors, measuring converters etc. POWER SUPPLY MODULES Basic functionality Power supply Power consumption Rated output voltage Rated output load Connection type APS-1 APS-04 DC power supply V AC, 5060 Hz 12 W 60 W 5.2 V DC 24 V DC 2.4 A 2.5 A screw type connectors 93 x 25 x 56 mm 91 x 71 x 56 mm Note: Contact Smarteh for other available power supply Standalone Products 45

46 SW & Tools

47 SW & Tools 8.1. USB TO SERIAL RS-232 RS-485 ADAPTER USB TO SERIAL RS-232 RS-485 ADAPTER Basic functionality Rated communication speed Power supply Power consumption Mini USB RS-232-RJ-12 Connectors RS-232-DB9M RS-485-RJ-12 RS-485-DB9FM RS-485-screw RS485 line termination Power supply output (PS out) Configuration SW LSA-2.USB optically isolated serial converter from PC (USB) to RS-232 or RS-485 device up to 115 kbps from USB 0.25 W without power supply output (PS out) load USB connection to PC Tx, Rx, GND, +PS out Tx, Rx, GND A, B, GND, +PS out A, B, GND A, B, GND, +PS out internal 120 Ω 10 V DC 75 ma, galvanic isolated 80 x 64 x 26 mm Adapter is already supported with corresponding drivers on Linux systems (Ubuntu, Arch, Fedora, Suse), Vista and Windows 7, 8, 10. For other operating systems (Win98, Win 2000, Win ME and XP) drivers can be downloaded from SW & Tools 47

48 8.2. LON LINE TESTER LON line tester LLT-1 is testing device for quick checking of LON TPFT kbps based network built with CAT5+ cabling. Testing can be performed on busy networks (traffic running) or on idle networks (no traffic). LON NETWORK CABLE TESTER Basic functionality Power supply Power consumption Supported diagnostics Limitations of use Package LLT-1 MASTER LLT-1 SLAVE testing device for quick checking of network cables on LON FT kbps based networks, primarily built with CAT5+ cabling 2 x AA batteries or 5 V DC adapter 0.3 A line shorted, using LLT-1 MASTER signal level sufficient, using LLT-1 MASTER and LLT-1 SLAVE transmitreceive operation, using LLT-1 MASTER and LLT-1 SLAVE only one Master and Slave pair of LLT-1 tester can be used on single FT-10 channel at the same time testing through routers, repeaters and gateways is not possible. different type of channels (like XF-1250) are not supported. protective bag 2 x AA batteries (not included) AC power adapter 154 x 95 x 40 mm 48 SW & Tools

49 8.3. PROGRAMMING CABLES PROGRAMMING CABLES PMC PTC PCC PMU programming, parameterization & parameterization & programming, Functionality parameterization & online monitoring online monitoring online monitoring parameterization & online debugging LPC-2.C05 HW compatibility LRC-2.xxx GM2 LRC-1 LPC-2.MC8 LPC-2.MC9 LPC-2.MC7 LPC-2.MC3 Smarteh IDE SW compatibility (programming) LPC Tester (monitoring) GSM Manager (parameterization) LPC Tester LRC Manager Smarteh IDE LRC Manager (monitoring) PC communication port COM (RS-232) USB Communication connector DB9 RJ-12 DB9 Dubox USB A - B USB mini SW & Tools 49

50 8.4. PROGRAMMING SW Smarteh IDE Smarteh IDE software is a tool for programming LPC-2 controllers. It combines tools for composing LPC-2 configurations and programming application logic. It allows composing different configurations from available LPC-2 modules, taking care of all configuration rules and limitations. Default SW tags for connected modules are created automatically. Composing configurations can be performed by module wizard, used for assembling chosen modules in to optimum number of LPC-2 configurations. Smarteh IDE can be obtained from Smarteh s web page for free. Sample of the Smarteh IDE - configuration. 50 SW & Tools

51 After final selection of modules we can select Program from Project menu. Composed configuration is then switched to programming editor. Programming in Smarteh IDE is used for development of software application for the selected hardware configuration. Programming editor supports following programming languages by IEC standard: IL (instruction list), ST (structured text), LD (ladder diagram), FBD (function block diagram) and SFC (sequential function chart). Sample of the Smarteh IDE programming editor Smarteh IDE software has the following system requirements: Microsoft Windows 7 or later.net version 4.5 or later At least 2GB RAM 1 GB hard disk space USB port SW & Tools 51

52 SMARTEH xeye xeye application is used for users which will not create and debug their own PLC program, but they still need to have some control over the LPC-2.MC9. With xeye it is possible to check the controller statuses, readwrite settings and monitor parameters online. In addition, transferring of PLC program to the controller is supported. Connection can be established over USB, LAN or internet. For remote internet connection only certificate validation from Smarteh company is necessary to be done. After that, controller will connect to the cloud automatically and remote connection can be established. xeye shows all information dynamically, according to the LPC-2.MC9 programming. Means, xeye presentation of information is adapted automatically to controller program. Sample of the xeye application. 52 SW & Tools

53 GSM MANAGER GSM Manager software is used for managing GSM modules. It allows parameterization and monitoring GSM module configuration. It also allows executing manually entered AT commands and monitoring GSM module processing. Sample of the GSM Manager setting options. SW & Tools 53

54 LCD COMPOSER The LCD Composer is an application for setting and downloading the background picture and relevant objects for the LCD Display panels (like LPC-2.DP1H, LPC-2.DP2H, LPC-2.DT1,...) The background picture is made in.bmp format and 220x176 pixel size resolution. It can be edited and adjusted by standard picture editing programs. The LCD panels program takes care for displaying this background picture and generating additional objects-elements on this picture (bargraphnumbers etc.). The settings from the LCD Composer are used to define this objects properties. Sample of the LCD Composer application. 54 SW & Tools

55 MODBUS TESTER & LPC TESTER Modbus Tester is a product for establishing the communication with the controllers over the Ethernet and exchanging data over the Modbus TCPIP protocol. Standard Modbus variables (digital inputs, coils, input registers, holding registers) are supported. LPC Tester is a product for testing and setting up IO devices. Main window consists of five parts. In digital values and analog values section selected buffer values are displayed. Currently communication status is displayed with two arrows. In the lower right part of the window we have command buttons to control tests. When application is started everything is ready to start communication. Sample of the Modbus Tester application. Sample of the LPC Tester application. SW & Tools 55

56 SMARTEH d.o.o. Poljubinj 114, 5220 Tolmin, Slovenia tel.: + 386(0) fax.: + 386(0) info@smarteh.si