8 PHOENIX CONTACT Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA

Transcription

1 8 PHOEIX COTACT

2 Surge protection for the power supply unit Building and industrial installations in different parts of the world have different requirements for lightning and surge protection in the power supply unit. Highcapacity type 1 + type 2 lightning arrester combinations provide the initial basis for the power supply. TRABTECH implements a complete three-stage protection concept with user-friendly and ready-to-install solutions, from type 2 surge arresters in sub-distribution boards through to type 3 protection for termination devices. IEC/E Main range 10 Features 12 Selection guide 14 1 lightning arresters FASHTRAB compact PUS 16 FASHTRAB PUS 19 FASHTRAB 22 POWERTRAB 24 VAVETRAB-MS T1/T lightning/surge arrester combination FASHTRAB compact 28 2 surge arresters VAVETRAB compact 32 VAVETRAB-MS 36 VAVETRAB compact combined with Special systems, type 1 and type 2 For industry solutions 46 For 690 V and 960 V power supply systems 47 3 device protection DI rail modules 52 For flush-type sockets 55 For cable ducts 55 Socket strips 57 Device protection adapters Basic solutions For building installation 61 For photovoltaic systems 62 Applications 66 EMA Main range 70 Selection guide 72 VA-SQ SE 74 VA-SQ SP 76 VA-SQ SI 78 Applications 80 PHOEIX COTACT 9

3 Surge protection for IEC/E power supply unit Main range FASHTRAB compact/vavetrab compact abeling options High-capacity varistors as surge arresters Encapsulated and low-line-followcurrent spark gaps Double terminal points up to 35 mm 2 Mechanical keying Compact installation blocks 10 PHOEIX COTACT

4 Surge protection for IEC/E power supply unit Main range The complete system The protective devices in the "compact" range offer a seamless installation concept. Uniform and high-capacity modules are available for virtually all power supply systems. Whether a lightning arrester, surge arrester or a combination of the two, this concept offers consistent and seamless application features that are universal. Worldwide use The voltage fluctuations in power supplies vary from country to country. The surge protection also has to deal with these short-term (temporary) voltage fluctuations. Due to the high rated voltage of 350 V AC, arresters in the "compact" range have no limitations and can be used in 230/400 V systems. Perfect pluggability Universal pluggability ensures a high degree of comfort, e.g., for insulation measurements in the system. Instead of accessing the installation, just unplug the connector. The symmetrical connector design facilitates plugging in both directions within the base element. These protective devices can be installed in any control cabinet environment thanks to this flexible installation direction. Innovative technology The high breaking capacity of the innovative spark gaps also enables their use in low-voltage high-current installations with short-circuit currents of up to 50 ka. The encapsulated lightning arresters are designed to ensure a low amount of line follow current, so that even small backup fuses remain unaffected. Designation structure Product range: FASHTRAB/ VAVETRAB compact o. of phase conductors S - Separate + C - Combined Maximum continuous voltage U C FT - CP - 3 S VA - CP - 3 S Status at a glance The mechanical status indicator provides information locally at a glance. Remote signaling A common floating remote indication contact enables remote signaling without taking up extra space. PHOEIX COTACT 11

5 Surge protection for IEC/E power supply unit Features POWERTRAB abeling option Double terminal point ED indicator Remote indication contact Remote indication circuit power supply Protective conductor connection Rugged aluminum die-cast housing Connection for module mounting VAVETRAB 17.5 mm design width Plug-in surge arrester 12 mm design width abeling options Plug-in surge arrester Terminal points up to 25 mm 2 including protective guide Mechanical keying Compact installation blocks Optional floating remote indication contact 12 PHOEIX COTACT

6 Surge protection for IEC/E power supply unit Features PUGTRAB Optical status indication Barcode for CHECKMASTER Uninterruptible and impedance-neutral insertion and removal abeling possible on input and output side Floating remote indication contact Keying for circuit type and voltage levels 17.5 mm design width Surge-current-resistant contact with DI rail COMBITRAB/MAITRAB Operating indicator Recessed O/OFF switch 1.8 m connecting cable Optional integrated signal interface protection, such as TV-SAT, ISD, etc. Country-specific versions Operating indicator Increased touch-proof protection PHOEIX COTACT 13

7 Surge protection for IEC/E power supply unit Selection guide The selection matrix makes it easy to select suitable surge protection for the desired application. The first column (etwork type) divides the selection according to the number of phases of the power supply system, and the second column (Description) contains the corresponding power supply system. Subsequent columns provide information about the properties of the surge protective devices. The corresponding order numbers are then listed. Product-specific information can be found on the corresponding pages. Special solutions for the IT power supply system can be found on page 47 onwards. 3-phase power supply etwork type T-S/TT T-C Description 3-phase power supply unit Separate and 3-phase power supply unit Common 2-phase power supply T-S/TT T-C 2-phase power supply unit Separate and 2-phase power supply unit Common Single-phase power supply T-C T-S/TT Single-phase power supply unit Separate and Single-phase power supply unit Common and ote Products bearing this stamp (connector elements) can be tested with the CHECKMASTER. Termination device power supply T-S/TT T-S/TT 3-phase power supply unit on the termination device Separate and Single-phase power supply unit on the termination device 14 PHOEIX COTACT

8 Surge protection for IEC/E power supply unit Selection guide 1 lightning arrester 2 surge arrester 3 device protection 17.5 mm design width per channel 12 mm design width per channel Can be plugged in and tested Status indicator + remote indication contact DI-rail mountable Adapter Multi-position socket strip Socket installation Surge protective device Order o. FT-CP-PUS-3S Page FT-CP-3S VA-CP-3S VA-MS-320/3+1-FM FT-CP-PUS-3C FT-CP-3C VA-CP-3C VA-MS-320/3+0-FM FT-CP-PUS-2S FT-CP-2S VA-CP-2S FT-CP-PUS-2C FT-CP-2C VA-CP-2C FT-CP-PUS-1S FT-CP-1S VA-CP-1S FT-CP-PUS-1C FT-CP-1C PT 4-/S-230AC PT 2-/S-230AC MT-1D 1 ) CBT-SCHUKO 1 ) ) Protection for power supply units is available in corresponding country-specific versions. Surge protective devices are also available with signal interface protection. BT-SKT-230AC BT-1S-230AC/A PHOEIX COTACT 15

9 Surge protection for the IEC/E power supply unit 1 lightning arrester FASHTRAB compact PUS Seamless pluggability (even for / spark gap) Thermal disconnect device for each individual connector Optical, mechanical status indication for the individual arresters With floating remote indication contact Connectors can be checked with CHECKMASTER High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations 5-conductor system;,,,, 4-conductor system;,,, otes: Dimensional drawings starting on page 240 Approvals starting on page 252 Total width mm Total width mm Electrical data IEC category / E type I / T1 I / T1 ominal voltage U 240 V AC (230/400 V AC /415 V AC) 240 V AC (230/400 V AC /415 V AC) Maximum continuous operating voltage U C - / - / V AC / 350 V AC / - - / - / 350 V AC ightning test curr. I imp (10/350) µs ominal discharge surge current I n (8/20) µs Peak value 100 ka 75 ka Charge 50 As 37.5 As Specific energy 2.50 MJ/Ω 1.40 MJ/Ω - / - / - 25 ka / 100 ka / - - / - / 75 ka (3-) Follow current quenching capacity I fi - / - / - 50 ka (264 V AC) / 100 A / - - / - / 50 ka (264 V AC) Protection level U P - / - / kv / 1.5 kv / - - / - / 1.5 kv A - / - / ns / 100 ns / - - / - / 100 ns Max. backup fuse according to IEC 315 A (g/gg) 315 A (g/gg) Immunity to short-circuiting (with max. backup fuse) I P 50 ka 50 ka General data Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / 13-2 Temperature range -40 C C -40 C C Inflammability class according to U 94 V0 V0 Test standards IEC / E / U 1449 / IEC / E / U 1449 / E /A11 E /A11 Remote indication contact PDT contact PDT contact Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / Max. operating voltage 250 V AC / 125 V DC 250 V AC / 125 V DC Max. operating current 1 A AC / 200 ma DC 1 A AC / 200 ma DC Description Order o. FASHTRAB compact PUS Replacement connector Order o. FT-CP-PUS-3S FT-CP-PUS-3C / - FT-CP-PUS-350-ST FT-CP-PUS-350-ST FT-CP-/-350-ST abeling material ZB 18..., see page 59 ZB 18..., see page PHOEIX COTACT

10 Surge protection for the IEC/E power supply unit 1 lightning arrester 4-conductor system;,,, 3-conductor system;,, 3-conductor system;,, Total width mm Total width 71.6 mm Total width 71.6 mm I / T1 I / T1 I / T1 240 V AC (230/400 V AC /415 V AC) 240 V AC (230/400 V AC /415 V AC) 240 V AC (230/400 V AC /415 V AC) 350 V AC / 350 V AC / - - / - / 350 V AC 350 V AC / 350 V AC / - 75 ka 50 ka 50 ka 37.5 As 25 As 25 As 1.40 MJ/Ω kj/ω kj/ω 25 ka / 100 ka / - - / - / 25 ka 25 ka / 100 ka / - 50 ka (264 V AC) / 100 A / - - / - / 50 ka (264 V AC) 50 ka (264 V AC) / 100 A / kv / 1.5 kv / - - / - / 1.5 kv 1.5 kv / 1.5 kv / ns / 100 ns / - - / - / 100 ns 100 ns / 100 ns / A (g/gg) 315 A (g/gg) 315 A (g/gg) 50 ka 50 ka 50 ka mm² / mm² / mm² / mm² / mm² / mm² / C C -40 C C -40 C C V0 V0 V0 IEC / E / U 1449 / IEC / E / U 1449 / IEC / E / U 1449 / E /A11 E /A11 E /A11 PDT contact PDT contact PDT contact mm² / mm² / mm² / mm² / mm² / mm² / V AC / 125 V DC 250 V AC / 125 V DC 250 V AC / 125 V DC 1 A AC / 200 ma DC 1 A AC / 200 ma DC 1 A AC / 200 ma DC Order o. Order o. Order o. FT-CP-PUS-2S FT-CP-PUS-2C FT-CP-PUS-1S FT-CP-PUS-350-ST FT-CP-PUS-350-ST FT-CP-PUS-350-ST FT-CP-/-350-ST FT-CP-/-350-ST ZB 18..., see page 59 ZB 18..., see page 59 ZB 18..., see page 59 For additional information, visit PHOEIX COTACT 17

11 Surge protection for the IEC/E power supply unit 1 lightning arrester FASHTRAB compact PUS Seamless pluggability (even for / spark gap) Thermal disconnect device for each individual connector Optical, mechanical status indication for the individual arresters With floating remote indication contact Connectors can be checked with CHECKMASTER High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations 2-conductor system;, - spark gap, for ightning Protection evel 1 otes: Dimensional drawings starting on page 240 Approvals starting on page 252 Total width 35.8 mm Total width 35.8 mm Electrical data IEC category / E type I / T1 I / T1 ominal voltage U 240 V AC (230/400 V AC /415 V AC) 240 V AC (-) Maximum continuous operating voltage U C - / - / V AC / - / 350 V AC - / 350 V AC / - ightning test curr. I imp (10/350) µs ominal discharge surge current I n (8/20) µs Peak value 25 ka 100 ka Charge 12.5 As 50 As Specific energy kj/ω 2.50 MJ/Ω - / - / - 25 ka / - / 25 ka - / 100 ka / - Follow current quenching capacity I fi - / - / - 50 ka (264 V AC) / - / 50 ka (264 V AC) - / 100 A / - Protection level U P - / - / kv / - / 1.5 kv - / 1.5 kv / - A - / - / - - / - / 100 ns - / 100 ns / - Max. backup fuse according to IEC 315 A (g/gg) - Immunity to short-circuiting (with max. backup fuse) I P 50 ka 25 ka General data Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / 13-2 Temperature range -40 C C -40 C C Inflammability class according to U 94 V0 V0 Test standards IEC / E / U 1449 IEC / E / E /A11 / U 1449 Remote indication contact PDT contact PDT contact Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / Max. operating voltage 250 V AC / 125 V DC 250 V AC / 125 V DC Max. operating current 1 A AC / 200 ma DC 1 A AC / 200 ma DC Description Order o. FASHTRAB compact PUS FASHTRAB compact Replacement connector FT-CP-PUS-1C Order o. FT-CP-/ / - FT-CP-PUS-350-ST FT-CP-/-350-ST abeling material ZB 18..., see page 59 ZB 18..., see page PHOEIX COTACT

12 FASHTRAB PUS CTR Surge protection for the IEC/E power supply unit 1 lightning arrester Single-channel Triggered High discharge capacity Good follow current quenching capacity with higher rated voltage Direct parallel connection with type 2 arresters supported otes: Dimensional drawings starting on page 240 Approvals starting on page kv protection level 2.5 kv/3 kv protection level Total width 35.5 mm Total width 35.5 mm /( ) /( ) /( ) /( ) Electrical data IEC category / E type I / T1 I / T1 I / T1 ominal voltage U 230 V AC (400 V AC) 230 V AC (400 V AC) 230 V AC (400 V AC) Maximum continuous operating voltage U C - / - / V AC / - / 350 V AC 440 V AC / - / 440 V AC 440 V AC / - / 440 V AC ightning test curr. I imp (10/350) µs ominal discharge surge current I n (8/20) µs Peak value 50 ka 50 ka - Charge 25 As 25 As - Specific energy kj/ω kj/ω - - / - / - 50 ka / - / 50 ka 50 ka / - / 50 ka 50 ka / - / - Protection level U P - / - / kv / - / 1.5 kv 2.5 kv / - / 2.5 kv 3 kv / - / 3 kv - / - / ns / - / 100 ns 100 ns / - / 100 ns 100 ns / - / 100 ns Max. backup fuse according to IEC 500 A (g) 500 A (H-g) Immunity to short-circuiting (with max. backup fuse) I P 50 ka 25 ka (440 V AC) General data Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / 6-1 Temperature range -40 C C -40 C C Inflammability class according to U 94 V0 V0 Test standards IEC / DI E / DI E /A11 IEC / DI E / DI E /A11 Description Order o. Order o. FASHTRAB PUS CTR Without status indicator FT-PUS CTR FT-PUS CTR FT-PUS CTR FASHTRAB PUS CTR With status indicator FT-PUS CTR-1.5/I FT-PUS CTR-2.5/I FT-PUS CTR-3.0/I abeling material ZB 18..., see page 59 ZB 18..., see page 59 Wiring bridge MPB..., see page 58 MPB..., see page 58 For additional information, visit PHOEIX COTACT 19

13 Surge protection for the IEC/E power supply unit 1 lightning arrester FASHTRAB Encapsulated and triggered With ignition electronics Direct parallel connection with type 2 arresters supported 5-conductor system;,,,,, pre-assembled installation block Total width 70.4 mm Electrical data IEC category / E type ominal voltage U I / T1 230 V AC (400 V AC) Maximum continuous operating voltage U C - / V AC / 260 V AC ightning test curr. I imp (10/350) µs ominal discharge surge current I n (8/20) µs Peak value Charge Specific energy - / - 35 ka (-) 17.5 As kj/ω (-) 35 ka / 50 ka Follow current quenching capacity I fi - / - 3 ka / 100 A Protection level U P - / - 2 kv / 2 kv Response time t A - / ns / 100 ns Max. backup fuse according to IEC Immunity to short-circuiting (with max. backup fuse) I P 400 A (H-g) 25 ka General data Connection data solid / stranded / AWG mm² / mm² / 20-2 Temperature range -40 C C Inflammability class according to U 94 V0 Test standards IEC / DI E / DI E /A11 Description Order o. FASHTRAB installation block With status indicator FT 35/3+1 CTR-2.0/I FASHTRAB I imp : 50 ka (10/350) µs abeling material ZB 18..., see page 59 Wiring bridge MPB..., see page PHOEIX COTACT

14 Surge protection for the IEC/E power supply unit 1 lightning arrester - spark gap, single-channel - spark gap, single-channel, plug-in Total width 17.6 mm Total width 35.8 mm / ( ) / ( ) /( ) /( ) I / T1 I / T1 230 V AC (400 V AC) 230 V AC (-) - / 260 V AC - / 260 V AC 50 ka 100 ka 25 As 50 As kj/ω (-) 2.50 MJ/Ω (-) - / 50 ka - / 100 ka - / 100 A - / 100 A - / 2 kv - / 1.5 kv - / 100 ns - / 100 ns mm² / mm² / mm² / mm² / C C -40 C C V0 V0 IEC / DI E / DI E /A11 IEC / E / E /A11 Order o. Order o. FT 50 / CTR ZB 18..., see page 59 ZB 18..., see page 59 MPB..., see page 58 MPB..., see page 58 FT 100 / For additional information, visit PHOEIX COTACT 21

15 Surge protection for the IEC/E power supply unit 1 lightning arrester FASHTRAB Single-channel High discharge capacity otes: Dimensional drawings starting on page 240 Approvals starting on page 252 Encapsulated, 35 ka lightning test current 25 ka lightning test current Total width 17.6 mm Total width 17.6 mm / ( ) / ( ) / ( ) / ( ) Electrical data IEC category / E type I / T1 I / T1 ominal voltage U 230 V AC (400 V AC) 230 V AC (400 V AC) Maximum continuous operating voltage U C - / - / V AC / - / 350 V AC 440 V AC / - / 440 V AC ightning test curr. I imp (10/350) µs ominal discharge surge current I n (8/20) µs Peak value 35 ka 25 ka Charge 17.5 As 12.5 As Specific energy kj/ω kj/ω - / - / - 35 ka / - / 35 ka 25 ka / - / 25 ka Follow current quenching capacity I fi - / - / ka / - / 1.5 ka 2.5 ka / - / 2.5 ka Protection level U P - / - / - 5 kv / - / 5 kv 5 kv / - / 5 kv A - / - / ns / - / 100 ns 100 ns / - / 100 ns Max. backup fuse according to IEC 400 A (g) 250 A (g) Immunity to short-circuiting (with max. backup fuse) I P 25 ka 25 ka General data Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / 20-2 Temperature range -40 C C -40 C C Inflammability class according to U 94 V0 V0 Test standards IEC / E /A11 IEC / E /A11 Description Order o. FASHTRAB Order o. FT FT abeling material ZB 18..., see page 59 ZB 18..., see page 59 Wiring bridge MPB..., see page 58 MPB..., see page PHOEIX COTACT

16 Surge protection for the IEC/E power supply unit 1 lightning arrester 60 ka lightning test current 50 ka lightning test current Single-channel, encapsulated, - spark gap, 100 ka lightning test current, for ightning Protection evel 1 Total width 35.5 mm Total width 35.5 mm Total width 35.8 mm / ( ) / ( ) / ( ) / ( ) ( ) ( ) I / T1 I / T1 I / T1 230 V AC (400 V AC) 230 V AC (400 V AC) 230 V AC (400 V AC) 400 V / - / 400 V 440 V AC / - / 440 V AC - / 260 V AC / - 60 ka 50 ka 100 ka 30 As 25 As 50 As kj/ω kj/ω 2.50 MJ/Ω 60 ka / - / 60 ka 50 ka / - / 50 ka - / 100 ka / ka / - / 2.5 ka 25 ka / - / 25 ka - / 100 A / - 5 kv / - / 5 kv 5 kv / - / 5 kv - / 4 kv / ns / - / 100 ns 100 ns / - / 100 ns - / 100 ns / A (g) 500 A (H-g) - 25 ka 25 ka (440 V AC) mm² / mm² / mm² / mm² / mm² / mm² / C C -40 C C -40 C C V0 V0 V0 IEC / E /A11 IEC / E /A11 IEC / E /A11 Order o. Order o. Order o. FT FT-PUS FT ZB 18..., see page 59 ZB 18..., see page 59 ZB 18..., see page 59 MPB..., see page 58 MPB..., see page 58 MPB..., see page 58 For additional information, visit PHOEIX COTACT 23

17 Surge protection for the IEC/E power supply unit 1 lightning arrester POWERTRAB otes: Dimensional drawings starting on page arrester based on a varistor Meets ightning Protection evel I Universal solution for various network types: V AC IT systems 554/960 V AC T-C systems 400/690 V AC T-C systems Multi-stage status monitoring via remote indication contact ocal optical status indication Encapsulated, non-extinguishing Free of leakage current/no line follow current Very high TOV resistance Meets installation requirements according to CC/TS Use in harsh industrial environments Approvals starting on page 252 Total width 56 mm Single-channel FM / / Electrical data IEC category I, II / T1, T2 ominal voltage U 690 V AC Maximum continuous operating voltage U C 800 V AC TOV behavior at U T 1500 V AC (5 sec.) ominal load current I 150 A (serial through wiring with 50 mm 2 ) ominal discharge surge current I n (8/20) µs 35 ka Max. discharge surge current I max (8/20) µs 100 ka ightning test current (10/350) µs Peak value I imp 35 ka Protection level U P 4.5 kv Max. required backup fuse with branch wiring 400 A (g/gg; 2 x 50 mm 2 ) Max. required backup fuse with V-type through wiring 125 A (g/gg; 35 mm 2 ) Short-circuit resistance I P with max. backup fuse (effective) 50 ka (400 A g/gg) General data Ambient temperature (operation) -40 C C Degree of protection according to IEC 60529/E IP20 Housing material PA/PC Inflammability class according to U 94 V2 Test standards IEC / IEC Ed.1 FDIS 2010 / E /A Conductor Connection name Double terminal point Connection method Screw connection Screw thread M6 Connection data solid / stranded / AWG mm² / mm² / 6-0 Protective conductor connection Connection name conductor connection Connection method Ring cable lug Screw thread M10 Connection data solid / stranded / AWG mm² / mm² / 6-0 Remote indication contact Single-pos. /C contact Connection data solid / stranded / AWG mm² / mm² / Max. operating voltage 30 V AC / 30 V DC Max. operating current 1.5 A AC / 1.5 A DC Description Order o. POWERTRAB Mounting set, comprising: 1 x aluminum rail (147.5 x 30 x 3 mm), 3 x M10x20 hexagon head screw, 3 x M10 hexagonal nut, 3 x M10 washer, 3 x M10 spring washer, 1 x Installation instructions PWT AC-FM PHOEIX COTACT

18 Surge protection for the IEC/E power supply unit 1 lightning arrester 4-conductor system;,,, / Mounting set Total width 176 mm FM / / I, II / T1, T2 690 V AC 800 V AC 1500 V AC (5 sec.) 150 A (serial through wiring with 50 mm 2 ) 35 ka (per position) 100 ka 35 ka (per position) 4.5 kv 400 A (g/gg; 2 x 50 mm 2 ) 125 A (g/gg; 35 mm 2 ) 50 ka (400 A g/gg) -40 C C IP20 PA/PC V2 IEC / IEC Ed.1 FDIS 2010 / E /A Double terminal point Screw connection M mm² / mm² / 6-0 conductor connection Ring cable lug M mm² / mm² / 6-0 Single-pos. /C contact mm² / mm² / V AC / 30 V DC 1.5 A AC / 1.5 A DC Order o. Order o. PWT AC-FM PWT CCT-SET For additional information, visit PHOEIX COTACT 25

19 Surge protection for the IEC/E power supply unit 1 lightning arrester VA-MS-T1/T2.../ Seamless pluggability (even for / spark gap) Secure hold of connectors in the event of high lightning current loads and strong vibration thanks to new latching Thermal disconnect device for each individual connector Optical, mechanical status indication for the individual arresters With or without floating remote indication contact Mechanical keying of all slots Connectors can be checked with CHECKMASTER otes: Dimensional drawings starting on page 240 Approvals starting on page conductor system;,,,, (3+1 circuit) Total width 71.2 mm Electrical data IEC category / E type I, II / T1, T2 I, II / T1, T2 ominal voltage U 240 V AC (230/400 V AC V AC 240/415 V AC) Maximum continuous operating voltage U C - / - / - / V AC / - / 264 V AC / V AC / - / 264 V AC / - ightning test curr. I imp (10/350) µs Peak value 50 ka 50 ka Charge 25 As 25 As Specific energy kj/ω kj/ω Follow current quenching capacity I fi - / - / - / - - / - / 100 A (264 V AC) / - - / - / 100 A (264 V AC) / - ominal discharge surge current I n (8/20) µs - / - / - / ka / - / 50 ka / ka / - / 50 ka / - Max. discharge surge current I max. (8/20) µs - / - / - / - 50 ka / - / 50 ka / - 50 ka / - / 50 ka / - Protection level U P - / - / - / kv / 2 kv / 1.7 kv / kv / 2 kv / 1.7 kv / - Max. backup fuse according to IEC 160 A (g/gg) 160 A (g/gg) General data Connection data solid / stranded / AWG mm² / mm² / 15-2 Temperature range -40 C C Inflammability class according to U 94 V0 Test standards IEC / E /A11 Remote indication contact Single-pos. PDT Connection data solid / stranded / AWG mm² / mm² / Max. operating voltage 250 V AC Max. operating current 1.5 A AC (250 V AC) / 1.5 A DC (30 V DC) Description U C Order o. VAVETRAB-MS, varistor-based lightning arrester With remote indication contact 335 V AC VA-MS-T1/T2 335/12.5/3+1-FM Without remote indication contact 335 V AC VA-MS-T1/T2 335/12.5/ VAVETRAB-MS, varistor-based lightning arrester With remote indication contact 175 V AC VA-MS-T1/T2 175/12.5/3+1-FM Without remote indication contact 175 V AC VA-MS-T1/T2 175/12.5/ Replacement connector - / - VA-MS-T1/T2 335/12.5 ST / - VA-MS-T1/T2 175/12.5 ST F-MS-T1/T2 50 ST abeling material ZB 18..., see page PHOEIX COTACT

20 Surge protection for the IEC/E power supply unit 1 lightning arrester 5-conductor system;,,,, (4+0 circuit) 4-conductor system;,,, 3-conductor system;,, Total width 71.2 mm Total width 53.4 mm Total width 35.6 mm I, II / T1, T2 I, II / T1, T2 I, II / T1, T2 I, II / T1, T2 I, II / T1, T2 240 V AC (230/400 V AC /415 V AC) 240 V AC (230/400 V AC /415 V AC) 120 V AC 240 V AC (230 V AC V AC) 120 V AC - / 335 V AC / 335 V AC / - - / - / - / 335 V AC - / - / - / 175 V AC 335 V AC / - / 264 V AC / V AC / - / 264 V AC / - 50 ka 37.5 ka 37.5 ka 25 ka 25 ka 25 As As As 12.5 As 12.5 As kj/ω kj/ω kj/ω kj/ω kj/ω - / - / - / - - / - / - / - - / - / - / - - / - / 100 A (264 V AC) / - - / - / 100 A (264 V AC) / - - / 37.5 ka (3 x ) / 12.5 ka / - - / - / - / 37.5 ka (3 x ) - / - / - / 37.5 ka (3 x ) 12.5 ka / - / 50 ka / ka / - / 50 ka / - - / 150 ka (3 x ) / 50 ka / - - / - / - / 150 ka (3 x ) - / - / - / 150 ka (3 x ) 50 ka / - / 50 ka / - 50 ka / - / 50 ka / - - / 1.2 kv / 1.2 kv / - - / - / - / 1.2 kv - / - / - / 0.7 kv 1.2 kv / 2 kv / 1.7 kv / kv / 2 kv / 1.7 kv / A (g/gg) 160 A (g/gg) 160 A (g/gg) 160 A (g/gg) 160 A (g/gg) mm² / mm² / mm² / mm² / mm² / mm² / C C -40 C C -40 C C V0 V0 V0 IEC / E /A11 IEC / E /A11 IEC / E /A11 Single-pos. PDT Single-pos. PDT Single-pos. PDT mm² / mm² / mm² / mm² / mm² / mm² / V AC 250 V AC 250 V AC 1.5 A AC (250 V AC) / 1.5 A DC (30 V DC) 1.5 A AC (250 V AC) / 1.5 A DC (30 V DC) 1.5 A AC (250 V AC) / 1.5 A DC (30 V DC) Order o. Order o. Order o. VA-MS-T1/T2 335/12.5/4+0-FM VA-MS-T1/T2 335/12.5/3+0-FM VA-MS-T1/T2 335/12.5/1+1-FM VA-MS-T1/T2 335/12.5/ VA-MS-T1/T2 335/12.5/ VA-MS-T1/T2 335/12.5/ VA-MS-T1/T2 175/12.5/3+0-FM VA-MS-T1/T2 175/12.5/1+1-FM VA-MS-T1/T2 175/12.5/ VA-MS-T1/T2 175/12.5/ VA-MS-T1/T2 335/12.5 ST VA-MS-T1/T2 335/12.5 ST VA-MS-T1/T2 335/12.5 ST VA-MS-T1/T2 175/12.5 ST VA-MS-T1/T2 175/12.5 ST F-MS-T1/T2 50 ST ZB 18..., see page 59 ZB 18..., see page 59 ZB 18..., see page 59 For additional information, visit PHOEIX COTACT 27

21 Surge protection for the IEC/E power supply unit lightning/surge arrester combinations FASHTRAB compact Seamless pluggability (even for / spark gap) Thermal disconnect device for each individual connector Optical, mechanical status indication for the individual arresters With floating remote indication contact Connectors can be checked with CHECKMASTER High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations 5-conductor system;,,,, 4-conductor system;,,, otes: Dimensional drawings starting on page 240 Approvals starting on page 252 Total width mm Total width mm Electrical data IEC category / E type I + II / T1 + T2 I + II / T1 + T2 ominal voltage U 240 V AC (230/400 V AC /415 V AC) 240 V AC (230/400 V AC /415 V AC) Maximum continuous operating voltage U C - / - / V AC / 350 V AC / - - / - / 350 V AC ightning test curr. I imp (10/350) µs ominal discharge surge current I n (8/20) µs Peak value 100 ka 75 ka (3-pos.) Charge 50 As 37.5 As Specific energy 2.50 MJ/Ω 1.40 MJ/Ω - / - / - 25 ka / 100 ka / - - / - / 75 ka (all channels) Follow current quenching capacity I fi - / - / - 25 ka (264 V AC) / 100 A / - - / - / 25 ka (264 V AC) Protection level U P - / - / kv / 1.5 kv / - - / - / 1.5 kv A - / - / - 25 ns / 100 ns / - - / - / 25 ns Max. backup fuse according to IEC 315 A (g/gg) 315 A (g / gg) Immunity to short-circuiting (with max. backup fuse) I P 25 ka 25 ka General data Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / 13-2 Temperature range -40 C C -40 C C Inflammability class according to U 94 V0 V0 Test standards IEC / E / U 1449 IEC / E / U 1449 Remote indication contact PDT contact PDT contact Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / Max. operating voltage 250 V AC / 125 V DC 250 V AC / 125 V DC Max. operating current 1 A AC / 200 ma DC 1 A AC / 200 ma DC Description Order o. FASHTRAB compact Replacement connector Order o. FT-CP-3S FT-CP-3C / - FT-CP-350-ST FT-CP-350-ST FT-CP-/-350-ST / - VA-CP-350-ST VA-CP-350-ST abeling material ZB 18..., see page 59 ZB 18..., see page PHOEIX COTACT

22 Surge protection for the IEC/E power supply unit lightning/surge arrester combinations 4-conductor system;,,, 3-conductor system;,, 3-conductor system;,, Total width mm Total width 71.6 mm Total width 71.6 mm I + II / T1 + T2 I + II / T1 + T2 I + II / T1 + T2 240 V AC (230/400 V AC /415 V AC) 240 V AC (230/400 V AC /415 V AC) 240 V AC (230 V AC V AC) 350 V AC / 350 V AC / - - / - / 350 V AC 350 V AC / 350 V AC / - 75 ka 50 ka (2-pos.) 50 ka 37.5 As 25 As 25 As 1.40 MJ/Ω kj/ω kj/ω 25 ka / 100 ka / - - / - / 50 ka (all channels) 25 ka / 100 ka / - 25 ka (264 V AC) / 100 A / - - / - / 25 ka (264 V AC) 25 ka (264 V AC) / 100 A / kv / 1.5 kv / - - / - / 1.5 kv 1.5 kv / 1.5 kv / - 25 ns / 100 ns / - - / - / 25 ns 25 ns / 100 ns / A (g/gg) 315 A (g / gg) 315 A (g/gg) 25 ka 25 ka 25 ka mm² / mm² / mm² / mm² / mm² / mm² / C C -40 C C -40 C C V0 V0 V0 IEC / E / U 1449 IEC / E / U 1449 IEC / E / U 1449 PDT contact PDT contact PDT contact mm² / mm² / mm² / mm² / mm² / mm² / V AC / 125 V DC 250 V AC / 125 V DC 250 V AC / 125 V DC 1 A AC / 200 ma DC 1 A AC / 200 ma DC 1 A AC / 200 ma DC Order o. Order o. Order o. FT-CP-2S FT-CP-2C FT-CP-1S FT-CP-350-ST FT-CP-350-ST FT-CP-350-ST FT-CP-/-350-ST FT-CP-/-350-ST VA-CP-350-ST VA-CP-350-ST VA-CP-350-ST ZB 18..., see page 59 ZB 18..., see page 59 ZB 18..., see page 59 For additional information, visit PHOEIX COTACT 29

23 Surge protection for the IEC/E power supply unit lightning/surge arrester combinations FASHTRAB compact Seamless pluggability (even for / spark gap) Thermal disconnect device for each individual connector Optical, mechanical status indication for the individual arresters With floating remote indication contact Connectors can be checked with CHECKMASTER High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations otes: Dimensional drawings starting on page 240 Approvals starting on page conductor system;, Total width 35.8 mm Electrical data IEC category / E type ominal voltage U I + II / T1 + T2 240 V AC (230 V AC V AC) Maximum continuous operating voltage U C - / - / V AC / - / 350 V AC ightning test curr. I imp (10/350) µs ominal discharge surge current I n (8/20) µs Peak value Charge Specific energy - / - / - 25 ka 12.5 As kj/ω 25 ka / - / 25 ka Follow current quenching capacity I fi - / - / - 25 ka (264 V AC) / - / 25 ka (264 V AC) Protection level U P - / - / kv / - / 1.5 kv Response time t A - / - / - 25 ns / - / 25 ns Max. backup fuse according to IEC Immunity to short-circuiting (with max. backup fuse) I P 315 A (g / gg) 25 ka General data Connection data solid / stranded / AWG mm² / mm² / 13-2 Temperature range -40 C C Inflammability class according to U 94 V0 Test standards IEC / E / U 1449 Remote indication contact PDT contact Connection data solid / stranded / AWG mm² / mm² / Max. operating voltage 250 V AC / 125 V DC Max. operating current 1 A AC / 200 ma DC Description Order o. FASHTRAB compact Single-pos. FT-CP-1C Replacement connector - / - FT-CP-350-ST / - VA-CP-350-ST abeling material ZB 18..., see page PHOEIX COTACT

24 Surge protection for the IEC/E power supply unit lightning/surge arrester combinations - spark gap, for ightning Protection evel 1 Total width 35.8 mm I / T1 240 V AC (-) - / 350 V AC / ka 50 As 2.50 MJ/Ω - / 100 ka / - - / 100 A / - - / 1.5 kv / - - / 100 ns / ka mm² / mm² / C C V0 IEC / E / E /A11 / U 1449 PDT contact mm² / mm² / V AC / 125 V DC 1 A AC / 200 ma DC Order o. FT-CP-/ FT-CP-/-350-ST ZB 18..., see page 59 For additional information, visit PHOEIX COTACT 31

25 Surge protection for the IEC/E power supply unit 2 surge arrester VAVETRAB compact 2 seamless plug-in surge arrester Disconnect device on each individual connector Optical, mechanical status indication for the individual arresters With or without floating remote indication contact Mechanical keying of all slots Modular arrester blocks with ultra-slim design Use of varistors that are free of leakage current Connectors can be checked with CHECKMASTER High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations otes: Dimensional drawings starting on page 240 Approvals starting on page conductor system;,,,, Total width 49.2 mm 4-conductor system;,,, Total width mm Electrical data IEC category / E type II / T2 II / T2 II / T2 II / T2 ominal voltage U 240 V AC (230/400 V AC V AC 240 V AC (230/400 V AC V AC (3P/) 240/415 V AC) 240/415 V AC) Maximum continuous operating voltage U C - / - / V AC / 264 V AC / V AC / 150 V AC / - - / - / 350 V AC - / - / 175 V AC ominal discharge surge current I n (8/20) µs - / - / - 60 ka (all channels) / 20 ka / - 60 ka (all channels) / 20 ka / - - / - / 60 ka (all channels) - / - / 60 ka (all channels) Max. discharge surge current I max. (8/20) µs - / - / ka (all channels) / 40 ka / ka (all channels) / 40 ka / - - / - / 120 ka (all channels) - / - / 120 ka (all channels) Residual voltage at 5 ka - / - / kv / 0.25 kv / V / 200 V / - - / - / 1.1 kv - / - / 600 V Protection level U P - / - / kv / 1.5 kv / V / 950 V / - - / - / 1.4 kv - / - / 850 V (at In) A - / - / - 25 ns / 100 ns / - 25 ns / 100 ns / - - / - / 25 ns - / - / 25 ns Max. backup fuse according to IEC 125 A (g/gg) 125 A (g/gg) 125 A (g/gg) 125 A (g/gg) 125 A (g/gg) General data Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / 12-4 Temperature range -40 C C -40 C C Inflammability class according to U 94 V0 V0 Test standards IEC / E / U 1449 / IEC / E / U 1449 / IEEE C62.1 / IEEE C62.45 / IEEE C62.34 IEEE C62.1 / IEEE C62.34 / IEEE C62.45 Remote indication contact PDT contact PDT contact Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / Max. operating voltage 250 V AC / 125 V DC 250 V AC / 125 V DC Max. operating current 1 A AC (ohmic) / 200 ma DC (ohmic) 1 A AC (ohmic) / 200 ma DC (ohmic) Description Order o. Order o. VAVETRAB compact With remote indication contact VA-CP-3S VA-CP-3C Without remote indication contact VA-CP-3S-350/O VA-CP-3C-350/O With remote indication contact VA-CP-3S VA-CP-3C Bridge set, for bridging VAVETRAB compact to the r.c.c.b. Replacement connector MPB SET VA-CP-3S / - VA-CP-350-ST VA-CP-350-ST VA-CP-/-350-ST / - VA-CP-175-ST VA-CP-175-ST abeling material ZBFM 5..., see page 59 ZBFM 5..., see page PHOEIX COTACT

26 Surge protection for the IEC/E power supply unit 2 surge arrester 4-conductor system;,,, 3-conductor system;,, 3-conductor system;,, Total width mm Total width 25.3 mm Total width 25.3 mm II / T2 II / T2 II / T2 II / T2 II / T2 II / T2 240 V AC (230/400 V AC /415 V AC) 120 V AC 240 V AC (230/400 V AC /415 V AC) 120 V AC (2P/) 240 V AC (230/400 V AC /415 V AC) 120 V AC 350 V AC / 264 V AC / V AC / 150 V AC / - - / - / 350 V AC - / - / 175 V AC 350 V AC / 264 V AC / V AC / 150 V AC / - 40 ka (all channels) / 20 ka / - 40 ka (all channels) / 20 ka / - - / - / 40 ka (all channels) - / - / 40 ka (all channels) 20 ka / 20 ka / - 20 ka / 20 ka / - 80 ka (all channels) / 40 ka / - 80 ka (all channels) / 40 ka / - - / - / 80 ka (all channels) - / - / 80 ka (all channels) 40 ka / 40 ka / - 40 ka / 40 ka / kv / 0.25 kv / V / 200 V / - - / - / 1.1 kv - / - / 600 V 1.1 kv / 0.25 kv / V / 200 V / kv / 1.5 kv / V / 950 V / - - / - / 1.4 kv - / - / 850 V (at In) 1.4 kv / 1.5 kv / V / 950 V / - 25 ns / 100 ns / - 25 ns / 100 ns / - - / - / 25 ns - / - / 25 ns 25 ns / 100 ns / - 25 ns / 100 ns / A (g/gg) 125 A (g/gg) 125 A (g/gg) 125 A (g/gg) 125 A (g/gg) 125 A (g/gg) mm² / mm² / mm² / mm² / mm² / mm² / C C -40 C C -40 C C V0 V0 V0 IEC / E / U 1449 / IEC / E / U 1449 / IEC / E / U 1449 / IEEE C62.1 / IEEE C62.45 / IEEE C62.34 IEEE C62.1 / IEEE C62.34 / IEEE C62.45 IEEE C62.1 / IEEE C62.45 / IEEE C62.34 PDT contact PDT contact PDT contact mm² / mm² / mm² / mm² / mm² / mm² / V AC / 125 V DC 250 V AC / 125 V DC 250 V AC / 125 V DC 1 A AC (ohmic) / 200 ma DC (ohmic) 1 A AC (ohmic) / 200 ma DC (ohmic) 1 A AC (ohmic) / 200 ma DC (ohmic) Order o. Order o. Order o. VA-CP-2S VA-CP-2C VA-CP-1S VA-CP-2S-350/O VA-CP-2C-350/O VA-CP-1S-350/O VA-CP-2S VA-CP-2C VA-CP-1S VA-CP-350-ST VA-CP-350-ST VA-CP-350-ST VA-CP-/-350-ST VA-CP-/-350-ST VA-CP-175-ST VA-CP-175-ST VA-CP-175-ST ZBFM 5..., see page 59 ZBFM 5..., see page 59 ZBFM 5..., see page 59 For additional information, visit PHOEIX COTACT 33

27 Surge protection for the IEC/E power supply unit 2 surge arrester VAVETRAB compact, free of leakage current 2 seamless plug-in surge arrester Versions free of leakage current through series connection of varistor and surge arrester Disconnect device on each individual connector Optical, mechanical status indication for the individual arresters With floating remote indication contact Mechanical keying of all slots Modular arrester blocks with ultra-slim design High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations Further versions on request. otes: Dimensional drawings starting on page 240 Approvals starting on page conductor system;,,,, Total width 49.2 mm 4-conductor system;,,, Total width mm Electrical data IEC category / E type II / T2 II / T2 ominal voltage U 240 V AC (230/400 V AC /415 V AC) 240 V AC (230/400 V AC /415 V AC) Maximum continuous operating voltage U C - / - / V AC / 264 V AC / - - / - / 350 V AC ominal discharge surge current I n (8/20) µs - / - / - 30 ka (all channels) / 20 ka / - - / - / 30 ka (all channels) Max. discharge surge current I max. (8/20) µs - / - / - 60 ka (all channels) / 40 ka / - - / - / 60 ka (all channels) Residual voltage at 5 ka - / - / - 1 kv / 0.25 kv / - - / - / 1 kv Protection level U P - / - / kv / 1.5 kv / - - / - / 1.5 kv A - / - / ns / 100 ns / - - / - / 100 ns Max. backup fuse according to IEC 125 A (g/gg) 125 A (g/gg) General data Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / 12-4 Temperature range -40 C C -40 C C Inflammability class according to U 94 V0 V0 Test standards IEC / E / U 1449 / IEC / E / U 1449 / IEEE C62.1 / IEEE C62.34 / IEEE C62.45 IEEE C62.1 / IEEE C62.34 / IEEE C62.45 Remote indication contact PDT contact PDT contact Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / Max. operating voltage 250 V AC / 125 V DC 250 V AC / 125 V DC Max. operating current 1 A AC (ohmic) / 200 ma DC (ohmic) 1 A AC (ohmic) / 200 ma DC (ohmic) Description Order o. VAVETRAB compact Replacement connector Order o. VA-CP-3S-350VF VA-CP-3C-350 VF / - VA-CP-350 VF-ST VA-CP-350 VF-ST VA-CP-/-350-ST abeling material ZBFM 5..., see page 59 ZBFM 5..., see page PHOEIX COTACT

28 Surge protection for the IEC/E power supply unit 2 surge arrester 4-conductor system;,,, 3-conductor system;,, 3-conductor system;,, Total width mm Total width 25.3 mm Total width 25.3 mm II / T2 II / T2 II / T2 240 V AC (230/400 V AC /415 V AC) 240 V AC (230/400 V AC /415 V AC) 240 V AC (230/400 V AC /415 V AC) 350 V AC / 264 V AC / - - / - / 350 V AC 350 V AC / 264 V AC / - 20 ka (all channels) / 20 ka / - - / - / 10 ka (1 channel) 10 ka / 20 ka / - 40 ka (all channels) / 40 ka / - - / - / 40 ka (all channels) 20 ka / 40 ka / - 1 kv / 0.25 kv / - - / - / 1 kv 1 kv / 0.25 kv / kv / 1.5 kv / - - / - / 1.5 kv 1.5 kv / 1.5 kv / ns / 100 ns / - - / - / 100 ns 100 ns / 100 ns / A (g/gg) 125 A (g/gg) 125 A (g/gg) mm² / mm² / mm² / mm² / mm² / mm² / C C -40 C C -40 C C V0 V0 V0 IEC / E / U 1449 / IEC / E / U 1449 / IEC / E / U 1449 / IEEE C62.1 / IEEE C62.34 / IEEE C62.45 IEEE C62.1 / IEEE C62.34 / IEEE C62.45 IEEE C62.1 / IEEE C62.34 / IEEE C62.45 PDT contact PDT contact PDT contact mm² / mm² / mm² / mm² / mm² / mm² / V AC / 125 V DC 250 V AC / 125 V DC 250 V AC / 125 V DC 1 A AC (ohmic) / 200 ma DC (ohmic) 1 A AC (ohmic) / 200 ma DC (ohmic) 1 A AC (ohmic) / 200 ma DC (ohmic) Order o. Order o. Order o. VA-CP-2S-350 VF VA-CP-2C-350 VF VA-CP-1S-350 VF VA-CP-350 VF-ST VA-CP-350 VF-ST VA-CP-350 VF-ST VA-CP-/-350-ST VA-CP-/-350-ST ZBFM 5..., see page 59 ZBFM 5..., see page 59 ZBFM 5..., see page 59 For additional information, visit PHOEIX COTACT 35

29 Surge protection for the IEC/E power supply unit 2 surge arrester VAVETRAB MS 30/40 ka performance class Multi-channel type 2 arrester 2 seamless plug-in surge arrester Disconnect device on each individual connector Optical, mechanical status indication for the individual arresters With or without floating remote indication contact Mechanical keying of all slots otes: Dimensional drawings starting on page 240 Approvals starting on page conductor system;,,,,, supply line supply from below 5-conductor system;,,,,, supply line supply from above Total width 70.8 mm Total width 70.8 mm Electrical data VA-MS 230 VA-MS 320 VA-MS 120 VA-MS 320 IEC category / E type II / T2 II / T2 II / T2 II / T2 ominal voltage U 230 V AC (400 V AC) 230 V AC (400 V AC) 120 V AC (208 V AC) 230 V AC (400 V AC) Maximum continuous operating voltage U C - / - / V AC / 260 V AC / V AC / 260 V AC / V AC / 260 V AC / V AC / 260 V AC / - ominal discharge surge current I n (8/20) µs - / - / - 20 ka / 20 ka / - 20 ka / 20 ka / - 20 ka / 20 ka / - 20 ka / 20 ka / - Max. discharge surge current I max. (8/20) µs - / - / - 40 ka / 40 ka / - 40 ka / 40 ka / - 40 ka / 40 ka / - 40 ka / 40 ka / - Residual voltage at 5 ka - / - / kv / 0.15 kv / kv / 0.15 kv / kv / 0.15 kv / kv / 0.15 kv / - Protection level U P - / - / kv / 1.5 kv / kv / 1.5 kv / kv / 1.5 kv / kv / 1.5 kv / - FM 11 A - / - / - 25 ns / 100 ns / - 25 ns / 100 ns / - 25 ns / 100 ns / - 25 ns / 100 ns / - Max. backup fuse according to IEC 125 A (g) 125 A (g) Immunity to short-circuiting (with max. backup fuse) I P 25 ka 25 ka General data Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / 20-2 Temperature range -40 C C -40 C C Inflammability class according to U 94 V0 V0 Test standards IEC / E /A11 IEC / E /A11 Remote indication contact PDT contact PDT contact Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / Max. operating voltage 250 V AC / 30 V DC 250 V AC / 30 V DC Max. operating current 0.75 A AC (250 V AC) / 3 A AC (125 V AC) 0.75 A AC (250 V AC) / 3 A AC (125 V AC) Description I max U C Order o. Order o. VAVETRAB, multi-position surge arrester combination With remote indication contact 40 ka 150 V AC VA-MS 120/3+1/FM-UD Without remote indication contact 40 ka 275 V AC VA-MS 230/ With remote indication contact 40 ka 275 V AC VA-MS 230/3+1 FM Without remote indication contact 40 ka 335 V AC VA-MS 320/ With remote indication contact 40 ka 335 V AC VA-MS 320/3+1/FM VA-MS 320/3+1/FM-UD VAVETRAB MS Without remote indication contact 30 ka 580 V AC With remote indication contact 30 ka 580 V AC Replacement connector 120 V AC 1-/ VA-MS 120-UD ST V AC 1-/ VA-MS 230 ST V AC 1-/ VA-MS 320 ST VA-MS 320-UD ST V AC 1-/ 230 V AC - F-MS 12 ST F-MS 12 ST abeling material ZB 18..., see page 59 ZB 18..., see page PHOEIX COTACT

30 Surge protection for the IEC/E power supply unit 2 surge arrester 4-conductor system;,,, 3-conductor system;,, 3-conductor system;,, Total width 53.4 mm Total width 35.6 mm Total width 35.6 mm VA-MS 320 VA-MS 580 VA-MS 230 VA-MS 320 II / T2 II / T2 II / T2 II / T2 II / T2 230 V AC (max. 240/415 V AC) 400 V AC (400/690 V AC T-C) 230 V AC 230 V AC 230 V AC (400 V AC) - / - / 335 V AC - / - / 580 V AC 275 V AC / 260 V AC / V AC / 260 V AC / - - / - / 275 V AC - / - / 60 ka (all channels) - / - / 45 ka (all channels) 20 ka / 20 ka / - 20 ka / 20 ka / - - / - / 40 ka (all channels) - / - / 120 ka (all channels) - / - / 90 ka (all channels) 40 ka / 40 ka / - 40 ka / 40 ka / - - / - / 80 ka (all channels) - / - / 1.2 kv - / - / 2.1 kv 1.1 kv / 150 V / kv / 150 V / - - / - / 1.1 kv - / - / 1.5 kv - / - / 2.5 kv 1.35 kv / 1.5 kv / kv / 1.5 kv / - - / - / 1.35 kv - / - / 25 ns - / - / 25 ns 25 ns / 100 ns / - 25 ns / 100 ns / - - / - / 25 ns 125 A (g / gg) 125 A (g/gg) 125 A (g/gg) 25 ka 25 ka 25 ka mm² / mm² / mm² / mm² / mm² / mm² / C C -40 C C -40 C C V0 V0 V0 IEC / E IEC / E /A11 IEC / E /A11 PDT contact Single-pos. PDT Single-pos. PDT mm² / mm² / mm² / mm² / mm² / mm² / V AC / 30 V DC 250 V AC / 30 V DC 250 V AC / 30 V DC 1.5 A AC (250 V AC) / 1.5 A DC (30 V DC) 1.5 A AC (250 V AC) / 1.5 A DC (30 V DC) 1.5 A AC (250 V AC) / 1.5 A DC (30 V DC) Order o. Order o. Order o. VA-MS 230/ VA-MS 230/ VA-MS 230/1+1-FM VA-MS 230/2+0-FM VA-MS 320/ VA-MS 320/ VA-MS 320/3+0-FM VA-MS 320/1+1-FM VA-MS 580/ VA-MS 580/3+0-FM VA-MS 230 ST VA-MS 230 ST VA-MS 320 ST VA-MS 320 ST VA-MS 580-ST F-MS 12 ST ZB 18..., see page 59 ZB 18..., see page 59 ZB 18..., see page 59 For additional information, visit PHOEIX COTACT 37

31 Surge protection for the IEC/E power supply unit 2 surge arrester VAVETRAB MS Single-channel, DI-rail mountable protective devices Comprising base element and connector Base element with/without floating remote indication contact Disconnect device on each individual connector Optical, mechanical status indication for the individual arresters Mechanical keying of all slots 2-conductor system;, / Spark gap, - Total width 17.7 mm Total width 17.7 mm / Electrical data... 60AC AC IEC category / E type II / T2 II / T2 II / T2 ominal voltage U 60 V AC/DC 230 V AC 230 V AC Maximum continuous operating voltage U C - / - / - 75 V AC / - / 75 V AC 275 V AC / - / 275 V AC - / 260 V AC / - ominal discharge surge current I n (8/20) µs - / - / - 15 ka / - / - 20 ka / - / 20 ka - / 20 ka / - Max. discharge surge current I max. (8/20) µs - / - / - 40 ka / - / 40 ka 40 ka / - / 40 ka - / 40 ka / - Residual voltage at 5 ka - / - / V / - / 325 V 1 kv / - / 1 kv - / 150 V / - Protection level U P - / - / V / - / 500 V 1.35 kv / - / 1.35 kv - / 1.5 kv / - A - / - / - 25 ns / - / 25 ns 25 ns / - / 25 ns - / 100 ns / - Max. backup fuse according to IEC A AC (g/gg) - General data Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / 20-2 Temperature range -40 C C -40 C C Inflammability class according to U 94 V0 V0 Test standards IEC / E /A11 IEC / E /A11 Remote indication contact Single-pos. PDT PDT contact Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / Max. operating voltage 250 V AC / 125 V DC 250 V AC / 125 V DC Max. operating current 1 A AC / 200 ma DC 1 A AC / 200 ma DC Description Order o. Order o. VAVETRAB MS With remote indication contact VA-MS 60/FM F-MS 12/FM Without remote indication contact VA-MS F-MS With remote indication contact VA-MS 230/FM Without remote indication contact VA-MS VAVETRAB surge protection plug 120 V AC 230 V AC IT 230 V AC 400 V AC 500 V AC 400 V AC 554 V AC Replacement connector 60 V AC 1-/ VA-MS 60 ST F-MS 12 ST V AC 1-/ VA-MS 230 ST abeling material ZB 18..., see page 59 ZB 18..., see page PHOEIX COTACT

32 Surge protection for the IEC/E power supply unit 2 surge arrester 2-conductor system;, / Connector for VA-MS base element Connector for VA-MS base element Total width 17.7 mm Total width 17.7 mm Total width 17.7 mm / ST IT ST ST ST ST ST /30 ST II / T2 II / T2 II / T2 II / T2 II / T2 II / T2 II / T2 II / T2 230 V AC 120 V AC 230 V AC 230 V AC 400 V AC 500 V AC 400 V AC 554 V AC 350 V AC / - / 350 V AC 150 V AC / 200 V DC 385 V AC / 500 V DC 335 V AC / 420 V DC 440 V AC / 585 V DC 600 V AC / 600 V DC 580 V AC / V AC / - 10 ka / - / 10 ka 20 ka 20 ka 20 ka 20 ka 15 ka 15 ka 15 ka 20 ka / - / 20 ka 40 ka 40 ka 40 ka 40 ka 30 ka 30 ka 30 ka 1 kv / - / 1 kv 550 V 1.35 kv 1.2 kv 1.5 kv 2.3 kv 2.1 kv 2.4 kv 1.5 kv / - / 1.5 kv 800 V 1.8 kv 1.5 kv 2.2 kv 2.7 kv 2.5 kv 2.7 kv 100 ns / - / 100 ns 25 ns 25 ns 25 ns 25 ns 25 ns 25 ns 25 ns 125 A (g) 125 A (g) 125 A (g) mm² / mm² / C C -40 C C -40 C C - V0 V0 IEC / E /A11 / F C / IEC / E /A11 / U 1449 / IEC / E /A11 / U 1449 / U 1449 IEEE C62.1 / C62.34 / C62.45 IEEE C62.1 / C62.34 / C62.45 PDT contact mm² / mm² / V AC / 125 V DC A AC / 200 ma DC - - Order o. Order o. Order o. VA-MS 350 VF/FM VA-MS 350VF VA-MS 120 ST VA-MS 230 IT ST VA-MS 320 ST VA-MS 400 ST VA-MS 500 ST VA-MS 580-ST VA-MS 750/30-ST VA-MS 350 VF ST ZB 18..., see page 59 For additional information, visit PHOEIX COTACT 39

33 Surge protection for the IEC/E power supply unit 2 surge arrester VAVETRAB MS 10/20 ka performance class Multi-channel type 2 arrester 2 seamless plug-in surge arrester Disconnect device on each individual connector Optical, mechanical status indication for the individual arresters With or without floating remote indication contact Mechanical keying of all slots Solutions for the low performance class otes: Dimensional drawings starting on page 240 Approvals starting on page conductor system;,,,, Total width 71.2 mm Electrical data / /20 IEC category / E type II / T2 II / T2 ominal voltage U 230 V AC (400 V AC) 230 V AC (400 V AC) Maximum continuous operating voltage U C - / - / V AC / 260 V AC / V AC / 260 V AC / - ominal discharge surge current I n (8/20) µs - / - / - 15 ka (all channels) / 20 ka / - 30 ka (all channels) / 20 ka / - Max. discharge surge current I max. (8/20) µs - / - / - 30 ka (all channels) / 30 ka / - 60 ka (all channels) / 30 ka / - Residual voltage at 5 ka - / - / kv / 150 V / kv / 150 V / - Protection level U P - / - / kv / 1.5 kv / kv / 1.5 kv / - Response time t A - / - / - 25 ns / 100 ns / - 25 ns / 100 ns / - Max. backup fuse according to IEC Immunity to short-circuiting (with max. backup fuse) I P 125 A (g/gg) 25 ka General data Connection data solid / stranded / AWG mm² / mm² / 15-2 Temperature range -40 C C Inflammability class according to U 94 V0 Test standards IEC / E /A11 Remote indication contact Single-pos. PDT Connection data solid / stranded / AWG mm² / mm² / Max. operating voltage 250 V AC Max. operating current 0.75 A AC (250 V AC) / 3 A (125 V AC) Min. operating current 5 ma (5 V) Description I max U C Order o. VAVETRAB MS Without remote indication contact 10 ka 350 V AC VA-MS 350/10/ With remote indication contact 10 ka 350 V AC VA-MS 350/10/3+1-FM VAVETRAB MS Without remote indication contact 20 ka 350 V AC VA-MS 350/20/ With remote indication contact 20 ka 350 V AC VA-MS 350/20/3+1-FM Replacement connector 350 V AC 1-/ VA-MS 350/10 ST V AC 1-/ VA-MS 350/20 ST V AC - F-MS 30 ST Base element, for individual assembly with protective connectors Without remote indication contact VA-MS/3+1-BE With remote indication contact VA-MS/3+1-BE/FM abeling material ZB 18..., see page PHOEIX COTACT

34 Surge protection for the IEC/E power supply unit 2 surge arrester 4-conductor system;,,, 3-conductor system;,, Total width 53.4 mm Total width 35.6 mm / / / /20 II / T2 II / T2 II / T2 II / T2 230 V AC (400 V AC) 230 V AC (400 V AC) 230 V AC (400 V AC) 230 V AC (400 V AC) - / - / 350 V AC - / - / 350 V AC 350 V AC / 260 V AC / V AC / 260 V AC / - - / - / 15 ka (all channels) - / - / 30 ka (all channels) 5 ka / 20 ka / - 10 ka / 20 ka / - - / - / 30 ka (all channels) - / - / 60 ka (all channels) 10 ka / 30 ka / - 20 ka / 30 ka / - - / - / 1.2 kv - / - / 1.2 kv 1.2 kv / 150 V / kv / 150 V / - - / - / 1.2 kv - / - / 1.4 kv 1.2 kv / 1.5 kv / kv / 1.5 kv / - - / - / 25 ns - / - / 25 ns 25 ns / 100 ns / - 25 ns / 100 ns / A (g/gg) 125 A (g/gg) 25 ka 25 ka mm² / mm² / mm² / mm² / C C -40 C C V0 V0 IEC / E /A11 IEC / E /A11 Single-pos. PDT Single-pos. PDT mm² / mm² / mm² / mm² / V AC 250 V AC 1.5 A AC (250 V AC) / 1.5 A DC (30 V DC) 1.5 A AC (250 V AC) / 1.5 A DC (30 V DC) 5 ma (5 V) 5 ma (5 V) Order o. Order o. VA-MS 350/10/ VA-MS 350/10/ VA-MS 350/10/3+0-FM VA-MS 350/10/1+1-FM VA-MS 350/20/ VA-MS 350/20/ VA-MS 350/20/3+0-FM VA-MS 350/20/1+1-FM VA-MS 350/10 ST VA-MS 350/10 ST VA-MS 350/20 ST VA-MS 350/20 ST F-MS 30 ST VA-MS/3+0-BE VA-MS/1+1-BE VA-MS/3+0-BE/FM VA-MS/1+1-BE/FM ZB 18..., see page 59 ZB 18..., see page 59 For additional information, visit PHOEIX COTACT 41

35 Surge protection for the IEC/E power supply unit 2 surge arrester VAVETRAB MS 65/80 ka performance class Multi-channel type 2 arrester 2 seamless plug-in surge arrester Secure hold of connectors in the event of high lightning current loads and strong vibration thanks to new latching Disconnect device on each individual connector Optical, mechanical status indication for the individual arresters With or without floating remote indication contact Mechanical keying of all slots Connectors can be checked with CHECKMASTER 5-conductor system;,,,, Total width 71.2 mm / / Electrical data.. 385/ /80 IEC category / E type II / T2 II / T2 ominal voltage U 240 V AC (230/400 V AC /415 V AC) 240 V AC (230/400 V AC /415 V AC) Maximum continuous operating voltage U C - / - / V AC / 264 V AC / V AC / 264 V AC / - ominal discharge surge current I n (8/20) µs - / - / - 30 ka / 40 ka / - 40 ka / 40 ka / - Max. discharge surge current I max. (8/20) µs - / - / - 65 ka / 80 ka / - 80 ka / 80 ka / - Residual voltage at 5 ka - / - / - 1 kv / 0.5 kv / - 1 kv / 0.5 kv / - Protection level U P - / - / kv / 1.7 kv / kv / 1.7 kv / - Response time t A - / - / - 25 ns / 100 ns / - 25 ns / 100 ns / - Max. backup fuse according to IEC Immunity to short-circuiting (with max. backup fuse) I P 250 A (g/gg) 25 ka General data Connection data solid / stranded / AWG mm² / mm² / 15-2 Temperature range -40 C C Inflammability class according to U 94 V0 Test standards IEC / DI E Remote indication contact Single-pos. PDT Connection data solid / stranded / AWG mm² / mm² / Max. operating voltage 250 V AC Max. operating current 1.5 A AC (250 V AC) / 1.5 A DC (30 V DC) Min. operating current 5 ma (5 V) Description I max U C Order o. VAVETRAB MS With remote indication contact 65 ka 385 V AC VA-MS 385/65/3+1-FM Without remote indication contact 65 ka 385 V AC VA-MS 385/65/ VAVETRAB MS With remote indication contact 80 ka 385 V AC VA-MS 385/80/3+1-FM Without remote indication contact 80 ka 385 V AC VA-MS 385/80/ Replacement connector For VA-MS 385/ / VA-MS 385/65 ST For VA-MS 385/ / VA-MS 385/80 ST F-MS 80 ST Base element, for individual assembly with protective connectors Without remote indication contact VA-MS/3+1-BE With remote indication contact VA-MS/3+1-BE/FM abeling material ZB 18..., see page PHOEIX COTACT

36 Surge protection for the IEC/E power supply unit 2 surge arrester 4-conductor system;,,, 3-conductor system;,, Total width 53.4 mm Total width 35.6 mm / /.. 385/ / / /80 II / T2 II / T2 II / T2 II / T2 240 V AC (230/400 V AC /415 V AC) 240 V AC (230/400 V AC /415 V AC) 240 V AC (230 V AC V AC) 240 V AC (230 V AC V AC) - / - / 385 V AC - / - / 385 V AC 385 V AC / 264 V AC / V AC / 264 V AC / - - / - / 90 ka (all channels) - / - / 120 ka (all channels) 30 ka / 40 ka / - 40 ka / 40 ka / - - / - / 150 ka (all channels) - / - / 200 ka (all channels) 65 ka / 80 ka / - 80 ka / 80 ka / - - / - / 1 kv - / - / 1 kv 1 kv / 0.5 kv / - 1 kv / 0.5 kv / - - / - / 1.8 kv - / - / 1.8 kv 1.8 kv / 1.7 kv / kv / 1.7 kv / - - / - / 25 ns - / - / 25 ns 25 ns / 100 ns / - 25 ns / 100 ns / A (g/gg) 250 A (g/gg) 25 ka 25 ka mm² / mm² / mm² / mm² / C C -40 C C V0 V0 IEC / DI E IEC / DI E Single-pos. PDT Single-pos. PDT mm² / mm² / mm² / mm² / V AC 250 V AC 1.5 A AC (250 V AC) / 1.5 A DC (30 V DC) 1.5 A AC (250 V AC) / 1.5 A DC (30 V DC) 5 ma (5 V) 5 ma (5 V) Order o. Order o. VA-MS 385/65/3+0-FM VA-MS 385/65/1+1-FM VA-MS 385/65/ VA-MS 385/65/ VA-MS 385/80/3+0-FM VA-MS 385/80/1+1-FM VA-MS 385/80/ VA-MS 385/80/ VA-MS 385/65 ST VA-MS 385/65 ST VA-MS 385/80 ST VA-MS 385/80 ST F-MS 80 ST VA-MS/3+0-BE VA-MS/1+1-BE VA-MS/3+0-BE/FM VA-MS/1+1-BE/FM ZB 18..., see page 59 ZB 18..., see page 59 For additional information, visit PHOEIX COTACT 43

37 Surge protection for the IEC/E power supply unit 2 surge arrester VAVETRAB MS base elements Single/multi-pos. design for accommodating protective connectors Versions with and without floating remote indication contact Keying when protective connector is inserted for the first time DI rail module otes: Dimensional drawings starting on page 240 Approvals starting on page 252 ot to be used with VA-MS-T1/T2...ST, VA-MS ST, and VA-MS ST 5-conductor system;,,,, 4-conductor system;,,, Total width 70.8 mm Total width 53.4 mm Electrical data ominal voltage U V AC (690 V AC) Max. backup fuse according to IEC 125 A (g / gg) 200 A (g / gg) General data Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / 15-2 Temperature range -40 C C -40 C C Inflammability class according to U 94 V0 V0 Test standards IEC / E /A11 IEC / E /A11 Remote indication contact Single-pos. PDT Single-pos. PDT Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / Max. operating voltage 250 V AC / 30 V DC 250 V AC / 30 V DC Max. operating current 0.75 A AC (250 V AC) / 2 A DC (30 V DC) 1.5 A AC (250 V AC) / 1.5 A DC (30 V DC) Description Order o. Order o. VAVETRAB, base element With remote indication contact VA-MS/3+1-BE/FM VA-MS/3+0-BE/FM Without remote indication contact VA-MS/3+1-BE VA-MS/3+0-BE abeling material ZB 18..., see page 59 ZB 18..., see page PHOEIX COTACT

38 Surge protection for the IEC/E power supply unit 2 surge arrester 3-conductor system;,, 3-conductor system;,, Single-position base element for use in single and multi-phase networks Total width 36.2 mm Total width 35.6 mm Total width 17.7 mm 240 V AC (415 V AC) 240 V AC (1P//) 240 V AC 200 A (g / gg) 200 A (g/gg) 125 A (g/gg) mm² / mm² / mm² / mm² / mm² / mm² / C C -40 C C -40 C C V0 V0 V0 IEC / E /A11 IEC / E /A11 IEC / E /A11 Single-pos. PDT Single-pos. PDT PDT contact mm² / mm² / mm² / mm² / mm² / mm² / V AC / 30 V DC 250 V AC / 30 V DC 250 V AC / 125 V DC 1 A AC (250 V AC) / 1.5 A DC (30 V DC) 1.5 A AC (250 V AC) / 1.5 A DC (30 V DC) 1 A AC (ohmic) / 200 ma DC (ohmic) Order o. Order o. Order o. VA-MS/2+0-BE/FM VA-MS/1+1-BE/FM VA-MS BE/FM VA-MS/2+0-BE VA-MS/1+1-BE VA-MS BE ZB 18..., see page 59 ZB 18..., see page 59 ZB 18..., see page 59 For additional information, visit PHOEIX COTACT 45

39 Surge protection for the IEC/E power supply unit Special systems 2 surge arrester 2 seamless plug-in surge arrester Also suitable for industry solutions, e.g., in the wind industry Disconnect device on each individual connector Optical, mechanical status indication for the individual arresters With or without floating remote indication contact Mechanical keying of all slots Free of leakage current, for nominal voltages up to 690 V AC, e.g., rotor protection for wind power plants Free of leakage current, for nominal voltages up to 48 V AC Total width 35.6 mm Total width 35.6 mm 1 2 Electrical data Base element Plug IEC category / E type II / T2 - / - II / T2 ominal voltage U 690 V AC 240 V AC (415 V AC) 48 V AC (5 V...48 V AC) Maximum continuous operating voltage U C V AC - 75 V AC ominal discharge surge current I n (8/20) µs Max. discharge surge current I max. (8/20) µs Residual voltage at 5 ka - 15 ka - 10 ka - 30 ka - 20 ka kv (at 5 ka) V (at 5 ka) Protection level U P - 5 kv kv ns ns Max. backup fuse according to IEC 100 A (g / gg) 63 A (g / gg) 63 A (g / gg) 63 A (g / gg) General data Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / 18-2 Temperature range -40 C C -40 C C Inflammability class according to U 94 V0 V0 Test standards IEC / DI E / DI E /A11 IEC / DI E / DI E /A11 Remote indication contact Single-pos. PDT Single-pos. PDT Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / Max. operating voltage 250 V AC 250 V Max. operating current 1.5 A AC (250 V AC) / 1.5 A DC (30 V DC) 1.5 A AC (250 V AC) / 1.5 A DC (30 V DC) Description Order o. Order o. VAVETRAB MS, with protective connectors connected in series With remote indication contact VA-MS 800/30 VF/FM Protective connector, for inserting in base element 554 V AC 1-/ VA-MS 750/30-ST VA-MS 75 VF ST V AC - F-MS 2200/30 ST F-MS 12 ST Base element, for individual assembly with protective connectors With remote indication contact VA-MS 1+1-BE/FM/HD/S1A VA-MS/2+0-BE/FM/S abeling material ZB 18..., see page 59 ZB 18..., see page PHOEIX COTACT

40 Surge protection for 690 V AC and 960 V AC power supply systems Surge protection for the IEC/E power supply unit Special systems For power supplies with higher supply voltages Use in powerful industrial networks and wind turbines Other solutions for power supplies U 400 V available on request otes: Dimensional drawings starting on page 240 Approvals starting on page conductor system;,,, (400/690 V T-C system) 4-conductor system;,,, (554/960 V T-C system) Total width 142 mm Total width 53.4 mm Electrical data... T1... T2 IEC category / E type I / T1 II / T2 II / T2 ominal voltage U 400 V AC (690 V AC) 400 V AC (690 V AC) 554 V AC (554/960 V AC T-C) Maximum continuous operating voltage U C V AC 600 V AC 750 V AC ightning test curr. I imp (10/350) µs ominal discharge surge current I n (8/20) µs Peak value 50 ka (per channel) - - Charge 25 As - - Specific energy kj/ω ka (all channels) 45 ka (all channels) 45 ka (all channels) Follow current quenching capacity I fi - 25 ka (440 V AC) - - Protection level U P - 3 kv 2.7 kv 2.7 kv A ns 25 ns 25 ns General data Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / mm² / mm² / 20-2 Temperature range -40 C C -40 C C -40 C C Inflammability class according to U 94 V0 V0 V0 Test standards IEC / E /A11 IEC / DI E / IEC / DI E / DI E /A11 DI E /A11 Remote indication contact - PDT contact PDT contact Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / Max. operating voltage V AC 250 V AC Max. operating current - 1 A AC (inductive) 1.5 A AC (250 V AC) / 1.5 A DC (30 V DC) Description Order o. Order o. SYS-SET, multi-position lightning arrester combination 1 SYS-SET/3/T1/ Surge protection combination 2 SYS-SET/3/T2/ VAVETRAB MS With remote indication contact VA-MS 750/30/3+0-FM Without remote indication contact VA-MS 750/30/ VAVETRAB surge protection plug 500 V AC VA-MS 500 ST V AC VA-MS 750/30-ST For additional information, visit PHOEIX COTACT 47

41 Surge protection for the IEC/E power supply unit 2 surge arrester with RCD Combi RCD VA-CP-RCD... For 5-conductor systems;,,,, Combination of type 2 surge arrester and RCD residual current circuit breaker Personal protection and device protection in a single device 2 seamless plug-in surge arrester Disconnect device on each individual connector Optical, mechanical status indication for all protective connectors Residual current circuit breaker is not triggered by magnetic influences caused by discharge currents in the type 2 arrester With selective RCD residual current circuit breaker, 300 ma Total width 121 mm With selective RCD residual current circuit breaker, 30 ma Total width 121 mm otes: Dimensional drawings starting on page 240 Approvals starting on page 252 T T Electrical data IEC category / E type II / T2 II / T2 ominal voltage U 240 V AC (230/400 V AC /415 V AC) 240 V AC (230/400 V AC /415 V AC) Maximum continuous operating voltage U C - / V AC / 264 V AC 350 V AC / 264 V AC ominal discharge surge current I n (8/20) µs - / - 60 ka (all channels) / 20 ka 60 ka (all channels) / 20 ka Max. discharge surge current I max. (8/20) µs - / - 90 ka (all channels) / 30 ka 90 ka (all channels) / 30 ka Residual voltage at 5 ka - / kv / 0.3 kv 1.2 kv / 0.3 kv Protection level U P - / - 2 kv / 2 kv 2 kv / 2 kv A - / - 25 ns / 100 ns 25 ns / 100 ns General data Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / 12-4 Temperature range -25 C C -25 C C Inflammability class according to U 94 V0 V0 Test standards IEC / E / IEC / IEC / E / IEC / IEC / IEC IEC / IEC RCD data Class A selective A ominal load current I 40 A 40 A Rated residual current 300 ma 30 ma Rated making and breaking capacity I m 630 A 1.5 ka Rated residual making and breaking capacity I m 630 A 2.5 ka Surge withstand capability 6 kv (1.2/50 µs) 6 kv (1.2/50 µs) Immunity to short-circuiting I nc 10 ka backup fuse: 63 A 10 ka backup fuse: 63 A Tripping time for I n 300 ms 300 ms Tripping time for 5xI n 40 ms 40 ms Cycles, max Utilization category AC 23 A AC 23 A Description Order o. VAVETRAB compact with RCD Replacement connector VA-CP-RCD-3S/40/0.3/SE Order o. VA-CP-RCD-3S/40/ / - VA-CP-350-ST-GY VA-CP-350-ST-GY VA-CP-/-350-ST-GY VA-CP-/-350-ST-GY PHOEIX COTACT

42 Combi MCB VA-CP-MOSO... Surge protection for the IEC/E power supply unit 2 surge arrester for 60 mm system technology Multi-channel type 2 surge arresters and integrated arrester backup fuses For 60 mm system technology Tool-free mounting on 5 and 10 mm busbars Signaling to monitoring systems via remote indication contact in the event of an error Surge-proof arrester backup fuse tailored to type 2 arresters 2 seamless plug-in surge arrester Disconnect device on each individual connector Optical, mechanical status indication for the individual arresters Connectors can be checked with CHECKMASTER otes: Dimensional drawings starting on page 240 Approvals starting on page conductor system;,,,, Total width 54 mm 4-conductor system;,,, Total width 54 mm Electrical data IEC category / E type II / T2 II / T2 ominal voltage U 240 V AC (230/400 V AC /415 V AC) 240 V AC (230/400 V AC /415 V AC) Maximum continuous operating voltage U C - / - / V AC / 264 V AC / - - / - / 350 V AC ominal discharge surge current I n (8/20) µs - / - / - 60 ka (all channels) / 20 ka / - - / - / 60 ka (all channels) Max. discharge surge current I max. (8/20) µs - / - / - 75 ka (all channels) / 40 ka / - - / - / 75 ka (all channels) Residual voltage at 5 ka - / - / kv / 0.25 kv / - - / - / 1.8 kv Protection level U P - / - / kv / 1.5 kv / - - / - / 2.5 kv A - / - / - 25 ns / 100 ns / - - / - / 25 ns Max. backup fuse according to IEC (ot required) (ot required) Immunity to short-circuiting (with max. backup fuse) I P 25 ka 25 ka Rated surge current resistance I pk 52 ka 52 ka General data Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / 12-4 Temperature range -25 C C -25 C C Inflammability class according to U 94 V0 V0 Test standards IEC / E IEC / E /A11 Remote indication contact PDT contact PDT contact Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / Max. operating voltage 250 V AC / 125 V DC 250 V AC / 125 V DC Max. operating current 1 A AC (ohmic) / 0.2 A DC (ohmic) 1 A AC (ohmic) / 0.2 A DC (ohmic) Description Order o. VAVETRAB compact Replacement connector Order o. VA-CP-MOSO 60-3S-FM VA-CP-MOSO 60-3C-FM / - VA-CP-350-ST-GY VA-CP-350-ST-GY VA-CP-/-350-ST-GY abeling material ZBF 12..., see page 59 ZBF 12..., see page 59 For additional information, visit PHOEIX COTACT 49

43 Surge protection for the IEC/E power supply unit 2 surge arrester with integrated backup fuse Combi MCB VA-CP-MCB... Combinations of type 2 arresters with integrated arrester backup fuse Overload of the surge protection results in all-pole disconnection from the mains Signaling to monitoring systems via remote indication contact in the event of an error 2 seamless plug-in surge arrester Surge-proof arrester backup fuse Optical, mechanical status indication for the individual arresters Connectors can be checked with CHECKMASTER otes: Dimensional drawings starting on page 240 Approvals starting on page conductor system;,,,, Total width mm I Electrical data IEC category / E type ominal voltage U II / T2 240 V AC (230/400 V AC /415 V AC) C - / - / V AC / 264 V AC / - ominal discharge surge current I n (8/20) µs - / - / - 60 ka (all channels) / 20 ka / - Max. discharge surge current I max. (8/20) µs - / - / - 90 ka (all channels) / 30 ka / - Residual voltage at 5 ka - / - / kv / 0.5 kv / - Protection level U P - / - / kv / 1.7 kv / - Response time t A - / - / - 25 ns / 100 ns / - Max. backup fuse according to IEC Immunity to short-circuiting (with max. backup fuse) I P (ot required) 25 ka General data Connection data solid / stranded / AWG mm² / mm² / 12-4 Temperature range -25 C C Inflammability class according to U 94 V0 Test standards IEC / E / IEC / IEC Remote indication contact Single-pos. PDT Connection data solid / stranded / AWG mm² / mm² / Max. operating voltage 250 V AC / 250 V DC Max. operating current 2 A AC / 50 ma DC Description Order o. VAVETRAB compact, with an arrester backup fuse Replacement connector VA-CP-MCB-3S-350/40/FM / - VA-CP-350-ST-GY VA-CP-/-350-ST-GY PHOEIX COTACT

44 Surge protection for the IEC/E power supply unit 2 surge arrester with integrated backup fuse 4-conductor system;,,, 3-conductor system;,, Total width 114 mm Total width 72 mm I I II / T2 II / T2 240 V AC (230/400 V AC /415 V AC) 240 V AC (230/400 V AC /415 V AC) - / - / 350 V AC 350 V AC / 264 V AC / - - / - / 60 ka (all channels) 20 ka / 20 ka / - - / - / 90 ka (all channels) 30 ka / 30 ka / - - / - / 1.3 kv 1.3 kv / 0.5 kv / - - / - / 2.5 kv 2.5 kv / 1.7 kv / - - / - / 25 ns 25 ns / 100 ns / - (ot required) (ot required) 25 ka 25 ka mm² / mm² / mm² / mm² / C C -25 C C V0 V0 IEC / E / IEC / IEC / E / IEC / IEC IEC Single-pos. PDT Single-pos. PDT mm² / mm² / mm² / mm² / V AC / 250 V DC 250 V AC / 250 V DC 2 A AC / 50 ma DC 2 A AC / 50 ma DC Order o. Order o. VA-CP-MCB-3C-350/40/FM VA-CP-MCB-1S-350/40/FM VA-CP-350-ST-GY VA-CP-350-ST-GY VA-CP-/-350-ST-GY For additional information, visit PHOEIX COTACT 51

45 Surge protection for the IEC/E power supply unit 3 device protection MAIS-PUGTRAB For single and multi-phase power supply units DI rail module Comprising base element and connector With floating remote indication contact Optical signaling of disconnection via ED Tool-free connector replacement Connectors can be checked with CHECKMASTER otes: Dimensional drawings starting on page 240 Approvals starting on page conductor system;,,,, 3-conductor system;,, Total width 35.4 mm I OUT Total width 17.7 mm I OUT Electrical data... 24AC AC AC IEC category / E type III / T3 III / T3 III / T3 III / T3 ominal voltage U 230 V AC (max. 240/415 V AC) 24 V AC/DC 120 V AC 230 V AC Maximum continuous operating voltage U C AC/DC 335 V AC (255 V AC / -) / - 34 V AC / 150 V AC / V AC / - 44 V DC ominal load current I 26 A (30 C) 26 A (30 C) 26 A (30 C) 26 A (30 C) ominal discharge surge current I n (8/20) µs 1.5 ka (per channel) 1 ka 2.5 ka 3 ka Max. discharge surge current I max. (8/20) µs 10 ka (-) - Combined surge U OC 4 kv 2 kv 6 kv 6 kv Residual voltage at I n - / - - / V / / kv / 600 V 550 V Protection level U P - / ()- 1.2 kv / 1.5 kv 180 V / V / 1.1 kv / 1.5 kv 850 V Response time t A - / ()- 25 ns / 100 ns 25 ns / 100 ns 25 ns / 100 ns 25 ns / 100 ns Max. backup fuse according to IEC 25 A (g) 25 A (g) General data Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / Temperature range -40 C C -40 C C Inflammability class according to U 94 V0 V0 Test standards IEC / E /A11 IEC / E /A11 / U 1449 Remote indication contact /C contact /C contact Connection data solid / stranded / AWG mm² / mm² / mm² / mm² / Max. operating voltage 250 V 250 V Max. operating current 3 A AC 3 A AC Description Voltage U Order o. Order o. MAIS-PUGTRAB, comprising connector and base element MAIS-PUGTRAB connector Base element Grounding plug 24 V AC/DC PT 2-/S-24AC/FM V AC PT 2-/S-120AC/FM V AC PT 4-/S-230AC/FM PT 2-/S-230AC/FM V DC 24 V AC PT 2-/S- 24AC-ST V AC 120 V AC PT 2-/S-120AC-ST V AC PT 4-/S-230AC-ST PT 2-/S-230AC-ST V DC abeling material ZBF..., see page 125 ZBF..., see page 125 PT-BE/FM PT MAI-EST PHOEIX COTACT

46 Surge protection for the IEC/E power supply unit 3 device protection Replacement connector for 3-conductor system;,, 3-conductor system;,, /,, (IT system) 3-conductor system, for single-phase DC power supply units Total width 17.7 mm Total width 17.7 mm Total width 17.7 mm I OUT I OUT I (+) 11 (-) OUT AC... 60AC AC AC III / T3 III / T3 III / T3 III / T3 III / T3 III / T3 24 V AC 60 V AC 120 V AC 230 V AC 230 V AC 48 V DC 34 V AC / 100 V AC / 150 V AC / V AC / V AC / - - / 60 V DC 44 V DC 95 V DC 26 A (30 C) 26 A (30 C) 26 A (30 C) 26 A (30 C) 26 A (30 C) - 1 ka 2.5 ka 2.5 ka 3 ka 3 ka 500 A 8 ka 500 A 2 kv 4 kv 6 kv 6 kv 6 kv 6 kv (for 12 Ω) 180 V / 420 V / 620 V / 1.1 kv / - / - - / V 250 V 330 V 600 V 180 V / 550 V 400 V / 700 V 620 V / 850 V 1.1 kv / 1.5 kv 1.2 kv / 1.5 kv 120 V / 120 V 25 ns / 100 ns 25 ns / 100 ns 25 ns / 25 ns / 25 ns / 100 ns 1 ns / 1 ns 100 ns 100 ns 25 A (g) 25 A (g/c) 25 A (g) / / mm² / mm² / mm² / mm² / C C -40 C C -40 C C V0 V0 V0 IEC / E /A11 / U 1449 IEC / E /A11 IEC / E /A11 - /C contact /C contact / / mm² / mm² / mm² / mm² / V 250 V - 3 A AC/DC 3 A AC Order o. Order o. Order o. PT 2-IT-230AC/FM PT 2+1-S-48DC/FM PT 2-/S- 24AC-ST PT 2-/S- 60AC-ST PT 2-/S-120AC-ST PT 2-/S-230AC-ST PT 2-IT-230AC-ST PT 2+1-S-48DC-ST PT-BE/FM PT-BE/FM PT-BE/FM PT MAI-EST PT MAI-EST ZBF..., see page 125 ZBF..., see page 125 ZBF..., see page 125 For additional information, visit PHOEIX COTACT 53

47 Surge protection for the IEC/E power supply unit 3 device protection BOCKTRAB and PRITRAB BT-1S-230AC/... is used as device protection in deep installation boxes (according to DI 49073), cable ducts, underfloor systems, and termination devices. With double spring-cage terminal blocks for tool-free conductor connection Side latches for easy fixing Optical/acoustic signaling of disconnection For universal mounting, optical signaling BT-SKT 230/A is device protection for flush-type sockets. Independent of the switch range and pin arrangement Mounted on the socket insert For installation boxes according to DI Bridges provided for multiple combinations Subsequent on-site installation possible Thermally monitored protective circuit Acoustic signaling of disconnection Signal deactivation by pulling the link under the socket cover MAIS-PRITRAB is device protection for installation in cable ducts and installation boxes. Two-piece design, comprising PRT-S-230/FM protective connector and PRT-CD-AD1 flush-type base Optical and acoustic signaling of disconnection With floating remote indication contact Installation in range of switches with the appropriate central plate possible Tool-free connector replacement Total width 22.5 mm 230 V Electrical data IEC category / E type III / T3 ominal voltage U 240 V AC Maximum continuous operating voltage U C - / V AC / 440 V AC (4-conductor IT system) ominal load current I 16 A (30 C) ominal discharge surge current I n (8/20) µs 3 ka Max. discharge surge current I max. (8/20) µs - / - 8 ka (> 100x 1 ka) / - Combined surge U OC 6 kv Residual voltage at I n - / - - / - Protection level U P - / ()- 1.3 kv / - Response time t A - / ()- 25 ns (-) / 100 ns (, -) Max. backup fuse according to IEC 16 A (g/c/b) General data Connection data solid / stranded / AWG mm² / mm² / Temperature range -30 C C Inflammability class according to U 94 V0 Test standards IEC / E /A11 Remote indication contact - Connection data solid / stranded / AWG - Max. operating voltage - Max. operating current -! Description Voltage U Order o. BOCKTRAB, for universal mounting 240 V AC BT-1S-230AC/O SOCKETTRAB, device protection for installation socket inserts 230 V AC MAIS-PRITRAB, device protection connector with temperature monitoring and visual fault warning, plus remote indication contact 120 V AC 230 V AC MAIS-PRITRAB, device protection connector with temperature monitoring, visual and acoustic fault warning, plus remote indication contact 120 V AC 230 V AC MAIS-PRITRAB, flush-type base for installation in cable ducts and flush-type boxes 230 V AC Cover frame Central plate 54 PHOEIX COTACT

48 Surge protection for the IEC/E power supply unit 3 device protection For universal mounting, acoustic signaling For mounting in flush-type sockets For mounting in cable ducts and installation boxes Total width 22.5 mm Total width 31.5 mm 230 V!! FM AC AC III / T3 III / T3 III / T3 III / T3 240 V AC 230 V AC 120 V AC 230 V AC 275 V AC / 440 V AC (4-conductor IT system) 335 V AC / V AC / 150 V AC 253 V AC / 253 V AC 16 A (30 C) 16 A (30 C) 10 A (CSA) 16 A (45 C) 3 ka ka 1.5 ka 8 ka (> 100x 1 ka) / ka / 4.5 ka 4.5 ka / 4.5 ka 4.5 ka / 4.5 ka 6 kv 4 kv 4 kv 4 kv - / - - / V / 330 V 1.2 kv / 650 V 1.3 kv / kv / 1.5 kv 600 V / 800 V 1.3 kv / 1.5 kv (At U OC ) 25 ns (-) / 100 ns (, -) 25 ns / 100 ns 25 ns / 100 ns 25 ns / 100 ns 16 A (g/c/b) 16 A (g / B) 16 A (g/c) mm² / mm² / / mm² / mm² / mm² / C C -25 C C -25 C C V0 V0 V0 IEC / E /A11 IEC / E /A11 IEC / E /A /C contact mm² / mm² / V AC A Order o. Order o. Order o. BT-1S-230AC/A BT-SKT 230/A PRT-S-120/FM PRT-S-230/FM PRT-S/A-120/FM PRT-S/A-230/FM PRT-CD-AD AR-J/ST550 WH ZP-J/TAE/ST550 WH For additional information, visit PHOEIX COTACT 55

49 Surge protection for the IEC/E power supply unit 3 device protection COMBITRAB and MAITRAB COMBITRAB For several termination devices With 1.8 m connecting cable Recessed O/OFF switch to prevent unintentional actuation Optical signaling of the surge voltage function via ED otes: Dimensional drawings starting on page 240 Approvals starting on page 252 MAITRAB Attachment plug For individual termination devices With increased touch-proof protection Optical signaling of the surge voltage function via ED MT-POWERIE For POWERIE transmission systems With adapted protective circuit Optimized attenuation behavior Optical signaling of the surge voltage function via ED ote: Other versions of CBT-? socket strips and MT attachment plugs with combined protection for the power supply and data/it interfaces are provided from page 153. Electrical data IEC category / E type ominal voltage U Maximum continuous operating voltage U C ominal load current I ominal discharge surge current I n (8/20) µs Combined surge U OC Protection level U P Response time t A General data Temperature range Inflammability class according to U 94 Test standards - / - - / - - / - / - - / - Description COMBITRAB, socket strip with surge protection For countryspecific use in Black D, A,, E, P MAITRAB, attachment plug with signal lamp for inserting in a socket, for device protection Black D, A, White D, A, Black B, F, CZ, SVK, P Black E, P White S, FI, Black CH MAITRAB-POWERIE, attachment plug with signal lamp for use in Powerline transmission systems Black D, A,, E, P 56 PHOEIX COTACT

50 Surge protection for the IEC/E power supply unit 3 device protection Socket strip, with 1.8 m connecting cable Attachment plug Attachment plug for Powerline transmission Total width 81 mm Total width 63 mm Total width 63 mm I OUT III / T3 III / T3 III / T3 230 V AC 230 V AC 230 V AC 260 V AC / 260 V AC 275 V AC / 360 V AC 260 V AC / 260 V AC 16 A (30 C) 16 A (30 C) 16 A (30 C) 1.5 ka / 1.5 ka 3 ka / 3 ka 3 ka / 3 ka 4 kv 4 kv 6 kv 1.3 kv / 1.5 kv / 1.5 kv 1.2 kv / 1.5 kv / 1.5 kv 1.1 kv / 1.5 kv / 1.5 kv 25 ns / 100 ns (and -) 25 ns / 100 ns - / 100 ns -20 C C -25 C C -25 C C V0 V0/HB V0/HB IEC / E /A11 IEC / E /A11 / VDE / IEC / E /A11 / IEC / IEC / EK-HD 195 S6 DI VDE Order o. Order o. Order o. CBT-SCHUKO MT-1 D MT-1 D/WH MT-ET B/F MT-1 E MT-1 S/WH MT-1 CH II MT-POWERIE For additional information, visit PHOEIX COTACT 57

51 Surge protection for the IEC/E power supply unit Wiring bridges TRABTECH wiring bridges For combinations of lightning and surge arresters In combination with other devices in the installation distributor, such as residual current circuit breakers and miniature circuit breakers Practical wiring of all common applications Single, three or four-phase versions with various numbers of positions The rated cross section of the MPB bridge metals is 16 mm2 per phase End covers are used to terminate and insulate individually cut bridges Description ominal current I Order o. Wiring bridge, for modules with 17.5 mm connecting pitch, single-phase 2-pos. 100 A MPB 18/ pos. 100 A MPB 18/ pos. 100 A MPB 18/ pos. 100 A MPB 18/ pos. 100 A MPB 18/ pos. 100 A MPB 18/1-7 BU pos. 100 A MPB 18/1-8 BU pos. 100 A MPB 18/ pos. 100 A MPB 18/ pos. 100 A MPB 18/ pos. 100 A MPB 18/ Wiring bridge, for modules with 17.5 mm connecting pitch, 3-phase 6-pos. 80 A MPB 18/ pos. 80 A MPB 18/ Wiring bridge, for modules with 17.5 mm connecting pitch, 4-phase 8-pos. 80 A MPB 18/ pos. 80 A MPB 18/ Wiring bridge, flexible, 16 mm² diameter, fork-type cable lug at one end 200 mm 100 A (30 C) MPB F200X16/ 1GS mm 100 A (30 C) MPB F400X16/ 1GS mm 100 A (30 C) MPB F600X16/ 1GS PHOEIX COTACT

52 abeling material Surge protection for the IEC/E power supply unit abeling material Flat zack marker strips Comprising five individual labels with 17.5 mm pitch. Can be labeled with CMS computer marking system or by hand using B-STIFT Description Order o. Marking labels Can be labeled acc. to customer specifications ZB 18 CUS Unprinted ZB 18:UBEDRUCKT ,,,, ZB 18,GS:-,ERDE ,,,, ZB 18,GS:ERDE Zack marker sheet, flat, 120-section, can be separated Can be labeled acc. to customer specifications ZBFM 5 CUS Unprinted ZBFM 5/WH:UBEDRUCKT Zack marker strip, flat, 5-section, unprinted 5-section ZBF 12:UBEDRUCKT For additional information, visit PHOEIX COTACT 59

53 Surge protection for the IEC/E power supply unit Feed-through terminal block Biconnect feed-through terminal block For wiring mixed combinations of lightning and surge arresters As a system extension for FASHTRAB and VAVETRAB applications Feed-through terminal block Electrical data Maximum continuous operating voltage U C 500 V AC/DC ominal current I 125 A (30 C) ightning test curr. I imp (10/350) µs Peak value 100 ka General data Connection data solid / stranded / AWG mm² / mm² / 20-2 Temperature range -40 C C Inflammability class according to U 94 V0 Test standards IEC / IEC / IEC Description Order o. Feed-through terminal block abeling material ZB 18..., see page 59 DK-BIC Equipotential bonding otes: Dimensional drawings starting on page 240 Equipotential bonding strip for main equipotential bonding according to DI VDE 0100 As well as for lightning protection equipotential bonding according to DI E Has a comb-shaped contact bar Equipotential busbar Description Order o. Equipotential busbar PAS PHOEIX COTACT

54 TRABTECH housing For separate installation of surge protective devices Use in harsh environmental conditions at the installation location Installation outdoors or indoors possible Aluminum housing equipped with two cable glands Supplied as standard: an S 35/7.5 DI rail The DI rail requires five part width sections of 17.5 mm each Surge protection for the IEC/E power supply unit /set solution otes: Dimensional drawings starting on page 240 IP65 protection class Description Order o. TRABTECH housing, for the isolated mounting of surge arresters TG Set solutions for building installations GEB-SET-CP otes: Approvals starting on page 252 Basic equipment for surge protection for the office, surgery, legal office or home, for example VAVETRAB compact (type 2) for installation in sub-distribution boards MAITRAB (type 3) device protection adapters, two of which are combined adapters Combined adapters protect the power supply and the data/signal interfaces Cables, bridges, and adapters are supplied as standard Package solution with surge protection Description Order o. Building set, consisting of: 1 x VA-CP-3S-350/O (surge arrester) 2 x MT-1D (equipment protection adapter) 1 x MT-ISD D (equipment and ISD protection adapter) 1 x MT-TV-SAT D (equipment and TV-SAT protective adapter) 2 x Adapter for F to TV (IEC) connector 1 x MPB-SET (4 flexible bridges) 1 x KB TV-SAT/150, 1 x KB TV/150, 1 x KB ISD/150 (connecting cable) Building set, consisting of: 1 x VA-CP-3S-350/O (surge arrester) 2 x MT-1D (equipment protection adapter) 1 x MT-TAE D (equipment and TAE protection adapter) 1 x MT-TV-SAT D (equipment and TV-SAT protective adapter) 2 x Adapter for F to TV (IEC) connector 1 x MPB-SET (4 flexible bridges) 1 x KB TV-SAT/150, 1 x KB TV/150, 1 x KB TAE/150 (connecting cable) GEB-SET-CP ISD/TV-SAT GEB-SET-CP TAE/TV-SAT For additional information, visit PHOEIX COTACT 61

55 Surge protection for the IEC/E power supply unit 2 surge arrester and sets for photovoltaic systems 2 surge arrester for PV systems 2 seamless plug-in surge arrester Optical, mechanical status indication for the individual arresters With or without floating remote indication contact Mechanical keying of all slots Connectors can be checked with CHECKMASTER otes: Dimensional drawings starting on page 240 Approvals starting on page 252 Insulated PV applications up to 1000 V DC, free of leakage current Total width 53.4 mm + Electrical data IEC category / E type Max. non-load voltage U OC II / T V DC Maximum continuous operating voltage U C (+) - (-) / (+/-) V DC Max. short-circuit current I SC max ominal discharge surge current I n (8/20) µs Max. discharge surge current I max. (8/20) µs 80 A DC 15 ka 30 ka Protection level U P (+) - (-) / (+/-) - 5 kv / 3 kv (+) - (-) / (+/-) - 25 ns / 100 ns General data Connection data solid / stranded / AWG mm² / mm² / 15-2 Temperature range -40 C C Degree of protection according to IEC 60529/E IP20 Housing material PBT/PA Inflammability class according to U 94 V0 Test standards DI E / IEC / IEC Remote indication contact Single-pos. PDT Connection data solid / stranded / AWG mm² / mm² / Max. operating voltage 250 V AC Max. operating AC current 1.5 A AC (250 V AC) Connection method Screw connection Description Order o. VAVETRAB-MS With remote indication contact (+)- & (-)- & (+)-(-) VA-MS 1000DC/2+F-FM Without remote indication contact (+)- & (-)- & (+)-(-) VA-MS 1000DC/2+F With remote indication contact Without remote indication contact (+)-(-) (+)-(-/) Replacement connector 1000 V DC 1-/ VA-MS 1000PV ST V DC 1-/ 1000 V DC - F-MS 1100/30 ST abeling material ZB 18..., see page PHOEIX COTACT

56 Surge protection for the IEC/E power supply unit 2 surge arrester and sets for photovoltaic systems Insulated or grounded PV applications up to 1000 V DC Insulated or grounded PV applications up to 600 V DC Fuse-free grounded PV applications up to 1000 V DC Total width 53.4 mm Total width 53.4 mm Total width 35.6 mm / II / T2 II / T2 II / T V DC 600 V DC 1000 V DC 1000 V DC 600 V DC 1000 V DC 80 A DC 80 A DC 80 A DC 15 ka 15 ka 15 ka 30 ka 40 ka 30 ka 5 kv / 5 kv 3 kv / 3 kv 5 kv / - 25 ns / 25 ns 25 ns / 25 ns 25 ns / 25 ns mm² / mm² / mm² / mm² / mm² / mm² / C C -40 C C -40 C C IP20 IP20 IP20 PBT/PA PBT/PA PBT/PA V0 V0 V0 DI E / IEC / IEC DI E / IEC / IEC DI E / IEC / IEC Single-pos. PDT Single-pos. PDT Single-pos. PDT mm² / mm² / mm² / mm² / mm² / mm² / V AC 250 V AC 250 V AC 1.5 A AC (250 V AC) 1.5 A AC (250 V AC) 1.5 A AC (250 V AC) Screw connection Screw connection Screw connection Order o. Order o. Order o. VA-MS 1000DC/2+V-FM VA-MS 600DC/2+V-FM VA-MS 1000DC/2+V VA-MS 600DC/2+V VA-MS 1000DC/1+V-FM VA-MS 1000DC/1+V VA-MS 1000PV ST VA-MS 1000PV ST VA-MS 600PV ST ZB 18..., see page 59 ZB 18..., see page 59 ZB 18..., see page 59 For additional information, visit PHOEIX COTACT 63

57 Surge protection for the IEC/E power supply unit 2 surge arrester and sets for photovoltaic systems Surge protection for photovoltaic systems For insulated or grounded PV applications up to 1000 V DC Pre-assembled protection solutions Suitable for DC applications such as PV systems 2 seamless plug-in surge arrester Optical, mechanical status indication for the individual arresters With or without floating remote indication contact Mechanical keying of all slots Connectors can be checked with CHECKMASTER Up to 1000 V DC/230 V AC Total width 200 mm DC + + AC I OUT Electrical data DC side AC side IEC category / E type II / T2 II / T2 Max. non-load voltage U OC 1000 V DC 230 V AC (U ) Maximum continuous operating voltage U C (+) - (-) / (+/-) V DC - Max. short-circuit current I SC max 80 A DC - ominal discharge surge current I n (8/20) µs 15 ka 20 ka Max. discharge surge current I max. (8/20) µs 30 ka 40 ka Protection level U P (+) - (-) / (+/-) - 5 kv / 5 kv 1.5 kv / 1.2 kv Response time ta 25 ns - General data Connection data solid / stranded / AWG mm² / mm² / 15-2 Temperature range -25 C C Degree of protection according to IEC 60529/E IP65 Housing material Polycarbonate fiber reinforced Inflammability class according to U 94 V2 Test standards IEC / DI E / IEC Remote indication contact Single-pos. PDT Connection data solid / stranded / AWG mm² / mm² / Max. operating voltage 250 V AC Max. operating AC current 1.5 A AC (at 250 V) Connection method Screw terminal blocks Description Order o. PV-SET 1000 DC/AC DC: (+)- & (-)- & (+)-(-) / AC: - & - PV-SET 1000 DC/AC PV-SET 1000DC (+)- & (-)- & (+)-(-) PV-SET 5ST/600DC (+)- & (-)- & (+)-(-) Replacement connector 1000 V DC 1-/ VA-MS 1000PV ST V AC 1-/ VA-MS 320 ST V AC 1-/ 64 PHOEIX COTACT

58 Surge protection for the IEC/E power supply unit 2 surge arrester and sets for photovoltaic systems For insulated or grounded PV applications up to 1000 V DC, with SUCIX For up to five solar strings, including a generator disconnect Total width 125 mm Total width 300 mm I OUT I OUT II / T V DC II / T2 600 V DC 1000 V DC 600 V DC 40 A DC 30 A 15 ka (DC) 20 ka 30 ka 40 ka 5 kv / 5 kv - / - 25 ns mm² / mm² / mm² / mm² / C C -25 C C IP65 IP65 Polycarbonate, glass-fiber-reinforced Polycarbonate fiber reinforced V2 (housing/cover) V2 IEC / DI E / IEC / IEC / E /A11 / IEC E SUCIX PV connector Screw terminal blocks Order o. Order o. PV-SET 1000 DC PV-SET 5ST/600DC VA-MS 1000PV ST VA-MS 600PV-UD ST For additional information, visit PHOEIX COTACT 65

59 FASHTRAB FT-CP-/-350-ST VAVETRAB VA-CP-350-ST FASHTRAB FT-CP-350-ST VAVETRAB VA-CP-350-ST FASHTRAB FT-CP-350-ST VAVETRAB VA-CP-350-ST FASHTRAB FT-CP-/-350-ST FASHTRAB FT-CP-/-350-ST FASHTRAB FT-CP-350-ST VAVETRAB VA-CP-350-ST FASHTRAB FT-CP-350-ST FASHTRAB FT-CP-PUS-350-ST VAVETRAB VA-CP-350-ST FASHTRAB FT-CP-350-ST FASHTRAB FT-CP-PUS-350-ST VAVETRAB VA-CP-350-ST FASHTRAB FT-CP-350-ST FASHTRAB FT-CP-PUS-350-ST FASHTRAB FT-CP-/-350-ST VAVETRAB VA-CP-350-ST FASHTRAB FT-CP-350-ST VAVETRAB VA-CP-350-ST FASHTRAB FT-CP-350-ST VAVETRAB VA-CP-350-ST FASHTRAB FT-CP-350-ST VAVETRAB VAVETRAB VAVETRAB VAVETRAB VA-CP-350-ST VA-CP-350-ST VA-CP-350-ST VA-CP-350-ST Surge protection for the power supply unit Applications Branch wiring V-type through wiring FM FM FASHTRAB compact FASHTRAB compact F1 FM FASHTRAB compact FASHTRAB compact 6 6 F1 F2 FM FASHTRAB compact 6 6 FASHTRAB compact FASHTRAB compact FASHTRAB compact F2 F1 The values for backup fuses F1 and F2 can be found in the relevant installation instructions. Separate backup fuses (F2) are not required when supplying up to 315 A. The values for backup fuse F1 can be found in the relevant installation instructions. This connection is particularly suitable for reducing additional voltages (caused by surge currents) on cables. etwork type Application FT-CP-3S-350 TT system 230/400 V AC 240/415 V AC 1 FT-CP-PUS-3S VA-CP-3S-350 FM VAVETRAB compact VAVETRAB compact 6 6 F1 F2 F1 F2 66 PHOEIX COTACT

60 FASHTRAB FT-CP-/-350-ST FASHTRAB FT-CP-/-350-ST VAVETRAB VA-CP-350-ST VAVETRAB VA-CP-350-ST FASHTRAB FT-CP-350-ST FASHTRAB FT-CP-PUS-350-ST FASHTRAB FT-CP-350-ST FASHTRAB FT-CP-PUS-350-ST VAVETRAB VA-CP-350-ST VAVETRAB VA-CP-350-ST FASHTRAB FT-CP-350-ST FASHTRAB FT-CP-PUS-350-ST FASHTRAB FT-CP-350-ST FASHTRAB FT-CP-PUS-350-ST VAVETRAB VA-CP-350-ST VAVETRAB VA-CP-350-ST FASHTRAB FT-CP-350-ST FASHTRAB FT-CP-PUS-350-ST FASHTRAB FT-CP-350-ST FASHTRAB FT-CP-PUS-350-ST VAVETRAB VA-CP-350-ST VAVETRAB VA-CP-350-ST VAVETRAB VA-CP-350-ST VAVETRAB VA-CP-350-ST VAVETRAB VA-CP-350-ST VAVETRAB VA-CP-350-ST VAVETRAB VA-CP-350-ST Surge protection for the power supply unit Applications etwork type Application 6 FM FASHTRAB compact FASHTRAB compact FT-CP-3S T-S system 230/400 V AC 240/415 V AC F1 F2 1 FT-CP-PUS-3S-350 FM 2 VA-CP-3S-350 FM FASHTRAB compact VAVETRAB compact 6 6 FASHTRAB compact F1 F2 F1 FM FASHTRAB compact F1 FM FASHTRAB compact FASHTRAB compact VAVETRAB compact 6 6 F2 FASHTRAB compact FT-CP-3C-350 T-C system 230/400 V AC 240/415 V AC 1 FT-CP-PUS-3C-350 F2 2 VA-CP-3C-350 FM F1 F2 F1 F2 PHOEIX COTACT 67

61 n VAVETRAB VA-CP-350-ST n n FASHTRAB FT-CP-350-ST C n n VAVETRAB VA-CP-350-ST C n n FASHTRAB FT-CP-350-ST VAVETRAB VAVETRAB VA-CP-350-ST VA-CP-350-ST Surge protection for the power supply unit Applications etwork type Application FM VAVETRAB VAVETRAB VAVETRAB 6 6 VAVETRAB T-S system 230/400 V AC 240/415 V AC F2 VA-MS 320 ST Ur 335 V I 15 ka VA-MS VA-MS F-MS 320 ST 320 ST 12 ST Ur 335 V Ur 335 V UC 260 V I 15 ka I 15 ka I 20 ka MPB 18/4-8 2 VA-MS-320/3+1-FM with residual current circuit breaker 6 FM FASHTRAB compact FASHTRAB compact FM IT system F1 F2 F1 F2 230 V AC FT-CP-2C VA-CP-2C-350 FM VAVETRAB VAVETRAB VAVETRAB VA-MS VA-MS VA-MS 580 ST 580 ST 580 ST U C:580VAC U :580VAC U :580VAC I : 15 ka I : 15 ka I : 15 ka VA-MS 580/3+0-FM IT system 500 V AC F1 F2 68 PHOEIX COTACT

62 n C n C n C n C n C n C n Surge protection for the power supply unit Applications etwork type Application FM VAVETRAB VA-MS 750 ST U C:750VAC I : 15 ka VAVETRAB VA-MS 750 ST U :750VAC I : 15 ka VAVETRAB VA-MS 750 ST U:750VAC I : 15 ka IT system 690 V AC F1 F2 F1 F2 1 PWT AC-FM 2 VA-MS 750/30/3+0/FM FM VAVETRAB VA-MS 500 ST U C:600VAC I:15kA n VAVETRAB VA-MS 500 ST U :600VAC I : 15 ka VAVETRAB VA-MS 500 ST U :600VAC I : 15 ka T-C system 400/690 V AC F1 F2 F1 F2 1 PWT AC-FM 2 SYS-SET/3/T2/690 FM VAVETRAB VA-MS 750 ST U C:750VAC I n: 15 ka VAVETRAB VA-MS 750 ST U :750VAC I : 15 ka VAVETRAB VA-MS 750 ST U :750VAC I : 15 ka T-C system 554/960 V AC F1 F2 F1 F2 1 PWT AC-FM 2 VA-MS 750/30/3+0/FM PHOEIX COTACT 69

63 Surge protection for EMA power supply unit Main range and features VAVETRAB-SQ... VA-SQ SE Universal mounting option Optical diagnostics and status indication per phase Pulse counter Remote indication contact VA-SQ SP EMA 4X non-metal housing EMA 3R/12 metal housing Universal mounting option VA-SQ SI Acoustic alarm EMA 4X housing Remote indication contact Compact design Optical diagnostics and status indication per phase 70 PHOEIX COTACT

64 VAVETRAB-SQ The VAVETRAB-SQ product range has been specially developed to meet orth American installation requirements (EMA). Protection for all installation locations: VA-SQ SE (Service Entrance - for the main supply) VA-SQ SP (Sub-Panel - for the subdistribution) VA-SQ SI (Small Installation - for the equipment) The common use of protective devices offers complete protection against harmful surge voltages. Mounting next to the control cabinet or directly on electrical devices is supported. The devices have a protective circuit with high discharge capacity for rated surge currents up to 400 ka (8/20) µs per phase. The individual fuse for each protective path, which is integrated in the design, provides additional safety for the products. The entire product range is approved according to U rd Edition. Integral protection Cascaded (graduated) use of VA-SQ protective devices in building installation ensures the efficient protection of electrical systems. Surge protection for EMA power supply unit Main range and features Service entrance Sub-panel Control cabinet or direct to equipment VA-SQ SE VA-SQ SP VA-SQ SI Features Display with pulse counter indicates the number of power pulse currents safely discharged to ground Acoustic status alarm for the protective device in the event of damage for VA-SQ SE and VA-SQ SP products EDs in all VA-SQ products for continuous status monitoring of each individual phase Max. surge current capacity (8/20) µs (U rd Edition) VA-SQ SE VA-SQ SP VA-SQ SI 180, 200, 300, and 400 ka 50 and 100 ka 36, 40, 80, 100, and 120 ka ominal current I n 20 ka 20 ka 20 ka Status EDs Acoustic alarm - Remote indication contact - Pulse counter - - Degree of protection EMA 3R/12 EMA 4X EMA 4X Short-circuit current rating (SCCR) 200 ka 200 ka 25 and 200 ka Filtering -30 db -30 db - PHOEIX COTACT 71

65 Surge protection for EMA power supply unit Selection guide The selection matrix makes it easy to select suitable surge protection for the desired application. Installation location Description VA-SQ SE Main supply Ideal protection for the main distribution Multi-phase surge protection with remote indication contact, status ED, interference filter, and pulse counter VA-SQ SP Sub-distribution Ideal protection for the sub-distribution Multi-phase surge protection with remote indication contact and interference filter in compact housing VA-SQ SI Equipment Ideal protection for small systems and equipment with limited space Multi-phase surge protection in compact housing Designation structure Product range: VAVETRAB SQ Product group: SE - Main supply SP - Sub-distribution SI - Equipment Max. rated surge current VA - SQ - SE /480Y / TS Voltage system/network type Selection D -Disconnect switch TS - Protection of all 10 paths 72 PHOEIX COTACT

66 Surge protection for EMA power supply unit Selection guide U type EMA class Max. surge current capacity (8/20 µs) SCCR ED status indicator Acoustic alarm Remote indication contact Pulse counter Grounding Filter Protection of all 10 paths Disconnect switch Page 2 3R/ ka R/ ka ka 2 3R/ ka R/ ka X 50 ka 100 ka 200 ka X 120 ka 25 ka 100 ka 25 ka 80 ka 25 ka 50 ka 25 ka 40 ka 200 ka 36 ka 25 ka 78 PHOEIX COTACT 73

67 Surge protection for EMA power supply unit Surge protective devices Device protection for the service entrance VA-SQ SE products provide maximum surge protection for the service entrance. Available with up to 400 ka surge current rating per phase Sine wave tracking filter Optional disconnect switch Optional ten-mode protection for sensitive electronics U rd edition listed OTE: The dimensions of 400 ka housing are 519 mm x 664 mm x 222 mm (W x H x D). Arrester for 120/240 V single/split-phase systems Arrester for 120/208 V wye and 120/240 V HD systems otes: The products are only available for export outside the EU and the European Economic Area. GD C C O GD C C O 120/240S 120/208Y 120/240 HD MCOV 150 V 150 V 150 V ominal discharge current I n 20 ka 20 ka EMI/RFI filtering khz khz Voltage Protection Rating (VPR) - / V / 700 V 700 V / 700 V 700 V / 1200 V - / V / 1200 V 700 V / 1200 V 700 V / 1500 V H- / H- - / - - / V / 150 V H V Short-circuit current rating (SCCR) 200 ka 200 ka U type 2 2 Degree of protection EMA 3R/12 EMA 3R/12 Error/status indicator Phase EDs / Acoustic alarm / Remote indication contact Phase EDs / Acoustic alarm / Remote indication contact Temperature range -20 C C -20 C C Dimensions W / H / D mm / mm / mm mm / mm / mm Test standards U rd edition, Sept / U 1283 / IEEE C62.41 / U rd edition, Sept / U 1283 / IEEE C62.41 / IEEE C62.45 IEEE C62.45 Description Order o. Order o. Service entrance surge protection with disconnect option 200 ka VA-SQ SE /240S /D ka VA-SQ SE /240S /D Service entrance surge protection with disconnect option 200 ka VA-SQ SE /208Y /D ka VA-SQ SE /208Y /D ka VA-SQ SE /240HD /D ka VA-SQ SE /240HD /D Service entrance surge protection with disconnect option 200 ka 400 ka 200 ka 400 ka Service entrance surge protection with disconnect option 200 ka Service entrance surge protection for sensitive electronics 180 ka ten-mode 300 ka ten-mode 180 ka ten-mode 300 ka ten-mode 74 PHOEIX COTACT

68 Surge protection for EMA power supply unit Surge protective devices Arrester for 277/480 V and 347/600 V wye systems Arrester for 277/480 V wye high-resistance ground systems Arrester for 120/208 V and 277/480 V wye systems GD C C O GD C C O GD 277/480Y 347/600Y 277/480Y 120/208Y 277/480Y 320 V 420 V 550 V 150 V 320 V 20 ka 20 ka 20 ka khz khz khz 2000 V / 1200 V 2500 V / 1500 V 2000 V / V / 700 V 1800 V / 1200 V 1200 V / 2000 V 1500 V / 2500 V - / 2000 V 600 V / 1000 V 1000 V / 1800 V - / - - / - - / - - / - - / ka 200 ka 200 ka EMA 3R/12 EMA 3R/12 EMA 3R/12 Phase EDs / Acoustic alarm / Remote indication contact Phase EDs / Acoustic alarm / Remote indication contact Phase EDs / Acoustic alarm / Remote indication contact -20 C C -20 C C -20 C C mm / mm / mm mm / mm / mm mm / mm / mm U rd edition, Sept / U 1283 / IEEE C62.41 / U rd edition, Sept / U 1283 / IEEE C62.41 / U rd edition, Sept / U 1283 / IEEE C62.41 / IEEE C62.45 IEEE C62.45 IEEE C62.45 Order o. Order o. Order o. VA-SQ SE /480Y /D VA-SQ SE /480Y /D VA-SQ SE /600Y /D VA-SQ SE /600Y /D VA-SQ SE /480Y-H /D VA-SQ SE /208Y /TS VA-SQ SE /208Y /TS VA-SQ SE /480Y /TS VA-SQ SE /480Y /TS For additional information, visit PHOEIX COTACT 75

69 Surge protection for EMA power supply unit Surge protective devices Device protection for the sub-panel VA-SQ SP products provide a surge current rating of 50 or 100 ka per phase in compact EMA 4X housing. Sine wave tracking circuitry that provides up to -30 db of noise attenuation Each surge protection mode is individually fused EDs provide continuous feedback on the status of each phase Dry contacts allow connection to a remote monitoring system U rd edition listed Arrester for 120/240 V single/split-phase systems Arrester for 120/208 V wye systems otes: The products are only available for export outside the EU and the European Economic Area. GD C C O GD C C O 120/240S 120/208Y MCOV 150 V 150 V Voltage Protection Rating (VPR) - / V / 1200 V 900 V / 1200 V - / V / 1500 V 700 V / 1500 V Short-circuit current rating (SCCR) 200 ka 200 ka ominal discharge current I n 20 ka 20 ka EMI/RFI filtering khz khz U type 2 2 Connection data Power (AWG / length) 10 AWG / 61 cm 10 AWG / 61 cm Remote indication contact #24 AWG/0.205 mm² wires (24 in./61 cm long) #24 AWG/0.205 mm² wires (24 in./61 cm long) Degree of protection EMA 4X EMA 4X Error/status indicator Phase EDs / Acoustic alarm / Remote indication contact Phase EDs / Acoustic alarm / Remote indication contact Temperature range -40 C C -40 C C Dimensions W / H / D mm / mm / mm mm / mm / mm Test standards U rd edition, Sept / U 1283 / IEEE C62.41 / U rd edition, Sept / U 1283 / IEEE C62.41 / IEEE C62.45 IEEE C62.45 Description Order o. Order o. Sub-panel surge protection 50 ka VA-SQ SP /240S ka VA-SQ SP /240S Sub-panel surge protection 50 ka VA-SQ SP /208Y ka VA-SQ SP /208Y Sub-panel surge protection 50 ka 100 ka 50 ka 100 ka Sub-panel surge protection 50 ka 100 ka Sub-panel surge protection 50 ka 100 ka 50 ka 100 ka 50 ka 100 ka 76 PHOEIX COTACT

70 Surge protection for EMA power supply unit Surge protective devices Arrester for 277/480 V and 347/600 V wye systems Arrester for 120/ V high-leg delta systems Arrester for delta systems GD C C O GD C C O C C O 277/480Y 347/600Y 120/240 HD 240D 480D/ 600D 320 V 320 V 150 V 300 V 300 V 2500 V / 1200 V 2500 V / 1200 V 1500 V / 1000 V 1500 V / V / V / 2500 V 1000 V / 2500 V 700 V / 1500 V - / 1500 V - / 1500 V 200 ka 200 ka 200 ka 200 ka 200 ka 20 ka 20 ka 20 ka khz khz khz AWG / 61 cm 10 AWG / 61 cm 10 AWG / 61 cm 10 AWG / 61 cm 10 AWG / 61 cm #24 AWG/0.205 mm² wires (24 in./61 cm long) #24 AWG/0.205 mm² wires (24 in./61 cm long) #24 AWG/0.205 mm² wires (24 in./61 cm long) #24 AWG/0.205 mm² wires (24 in./61 cm long) #24 AWG/0.205 mm² wires (24 in./61 cm long) EMA 4X EMA 4X EMA 4X Phase EDs / Acoustic alarm / Remote indication contact Phase EDs / Acoustic alarm / Remote indication contact Phase EDs / Acoustic alarm / Remote indication contact -40 C C -40 C C -40 C C mm / mm / mm mm / mm / mm mm / mm / mm U rd edition, Sept / U 1283 / IEEE C62.41 / U rd edition, Sept / U 1283 / IEEE C62.41 / U rd edition, Sept / U 1283 / IEEE C62.41 / IEEE C62.45 IEEE C62.45 IEEE C62.45 Order o. Order o. Order o. VA-SQ SP /480Y VA-SQ SP /480Y VA-SQ SP /600Y VA-SQ SP /600Y VA-SQ SP /240HD VA-SQ SP /240HD VA-SQ SP D VA-SQ SP D VA-SQ SP D VA-SQ SP D VA-SQ SP D VA-SQ SP D For additional information, visit PHOEIX COTACT 77

71 Surge protection for EMA power supply unit Surge protective devices Device protection for control cabinets and small installations VA-SQ SI products provide an inexpensive means of protecting electronic equipment in light commercial, light industrial, and residential environments. Compact EMA 4X housing Each surge suppression mode is individually fused EDs provide continuous feedback on the status of each phase U rd edition listed otes: The products are only available for export outside the EU and the European Economic Area. Arrester, 36 ka, 2-phase Arrester for 120/240 V single/split-phase systems / GD 36-2C /240S /240S MCOV 150 V 150 V 150 V Voltage Protection Rating (VPR) - / V / V / 800 V 700 V / 800 V - / - - / 1200 V - / 1200 V - / 1200 V Short-circuit current rating (SCCR) 25 ka 25 ka 25 ka ominal discharge current I n 10 ka 10 ka U type 1 1 Connection data Power (AWG / length) 14 AWG / 61 cm 12 AWG / 61 cm Degree of protection EMA 4X EMA 4X Housing material on-metal on-metal Error/status indicator Optical Optical Temperature range -40 C C -40 C C Dimensions W / H / D mm / mm / mm mm / mm / mm Test standards U rd edition, Sept / U 1283 / IEEE C62.41 / U rd edition, Sept / U 1283 / IEEE C62.41 / IEEE C62.45 IEEE C62.45 Description Order o. Order o. Component surge protection 36 ka, 120 V, 2-phase with common GD- VA-SQ SI 36-2C Component surge protection 50 ka, 120/240 V, 2-phase with separate GD- VA-SQ SI /240S ka, 120/240 V, 2-phase with separate GD- VA-SQ SI /240S ka, 120/240 V, 2-phase with separate GD- 120 ka, 120/240 V, 2-phase with separate GD- Component surge protection 40 ka, up to 600 V, 3-phase with common GD- 78 PHOEIX COTACT

72 Surge protection for EMA power supply unit Surge protective devices Arrester for 120/240 V single/split-phase systems Arrester, 40 ka, 3-phase GD / /240S /240S 40-3C V 150 V 750 V 1200 V / 700 V 1200 V / 700 V 4000 V / 2500 V - / 1200 V - / 1200 V - / 4000 V 25 ka 25 ka 25 ka 10 ka 10 ka AWG / 61 cm 12 AWG / 61 cm EMA 4X EMA 4X on-metal on-metal Optical Optical -40 C C -40 C C mm / mm / mm mm / mm / mm U rd edition, Sept / U 1283 / IEEE C62.41 / U rd edition, Sept / U 1283 / IEEE C62.41 / IEEE C62.45 IEEE C62.45 Order o. Order o. VA-SQ SI /240S VA-SQ SI /240S VA-SQ SI 40-3C For additional information, visit PHOEIX COTACT 79