NEW. Datasheet. SPD II and SPD III AC Surge Protector

Transcription

1 Datasheet and I AC EW The range of surge protectors are used for transient surge protection of single and multi-phase power circuits at the main electrical panel. Is are for the protection of individual electrical devices. They provide common-mode protection (between each ine and Ground), with impulse discharge capacity (Imax) for and for I. The SPD design is based on high-energy varistors (MOs) equipped with thermal disconnects and integral failure indicators. A remote signaling contact for disconnection indication is standard on each unit. For ease of replacement, varistors are housed in pluggable modules with connections that are mechanically keyed to the base to prevent incorrect arrestor module replacement. Typical applications include low voltage distribution, or protection of industrial control systems, equipment assemblies and devices. Weidmuller, Canada 10 Spy Court Markham, Ontario 3R 5H6 Telephone: (800) Facsimile: (877) info1@weidmuller.ca Website: Weidmuller, Mexico Blvd. Hermanos Serdán 698 Col. San Rafael Oriente Puebla, Puebla, Mexico C.P Telephone: Facsimile: clientes@weidmuller.com.mx Website: Weidmuller, United States 821 Southlake Blvd. Richmond, irginia Telephone: (800) Facsimile: (804) info@weidmuller.com Website:

2 For transient voltage protection of single and multi-phase circuits, in the main electrical panel, downstream of the main circuit breaker, or in control panels. 120/ 230/ AC etwork Mode eakage Current at Uc Follow Current U ominal Discharge Current (In), 15 impulses 8/20 μs U oltage Protection Rating (PR) Protection evel (Up) U Short-Circuit Current Rating (SCCR) AC System Thermal Disconnector Overcurrent Protection Remote Signal Indicator Operating Altitude (Max.) Relative Humidity Weight 120/240, 120/208 1 Pole, - or -G k U x 18 x C to +85 C 220/380, 240/415 1 Pole, - or -G 275AC 275AC k U x 18 x C to +85 C IEC ITERATIOA E EUROPE F E FRACE U1449 3rd Edition - USA and CAADA RoHS ow oltage SPD Directive 2002/95/EC ow oltage SPD Directive 2002/95/EC Ordering Data Bus bars 120/ SPD 2P IK SPD 3P IK SPD 4P IK / SPD 2P IK SPD 3P IK SPD 4P IK / / Mi Ft C : High-energy varistor Ft: Thermal fuse C: Remote signaling contact t 0 : Thermal disconnection system Mi: Disconnection indicator bus bars 2

3 For transient voltage protection of single and multi-phase circuits, in the main electrical panel, downstream of the main circuit breaker, or in control panels. 277/ 480/ AC etwork Mode eakage Current at Uc Follow Current U ominal Discharge Current (In), 15 impulses 8/20 μs U oltage Protection Rating (PR) Protection evel (Up) U Short-Circuit Current Rating (SCCR) AC System Thermal Disconnector Overcurrent Protection Remote Signal Indicator Operating Altitude Relative Humidity Weight 220/380, Pole, - or -G 400AC 400AC k U x 18 x C to +85 C 347/600, Pole, - or -G 550AC 550AC k U x 18 x C to +85 C IEC ITERATIOA E EUROPE F E FRACE U1449 3rd Edition - USA and CAADA RoHS ow oltage SPD Directive 2002/95/EC ow oltage SPD Directive 2002/95/EC Ordering Data Bus bars 277/ SPD 2P IK SPD 3P IK SPD 4P IK / SPD 2P IK SPD 3P IK SPD 4P IK / C : High-energy varistor / Mi Ft Ft: Thermal fuse C: Remote signaling contact t 0 : Thermal disconnection system Mi: Disconnection indicator bus bars 3

4 For transient voltage protection of multi-phase circuits with TT grounding systems. /PE etwork 230/400, 120/ AC 400AC eakage Current at Uc Follow Current ominal Discharge Current (In), 15 impulses 8/20 μs 100A Protection evel (Up) 1.5k U Short-Circuit Current Rating (SCCR) x 18 x C to +85 C GDT GDT: Specific gas tube IEC ITERATIOA Class II E EUROPE Class II F E FRACE Class II U1449 3rd Edition - USA ow oltage SPD Ordering data /PE Bus bars SPD S IK 1/ bus bars 4

5 For transient voltage protection of single-phase circuits with TT grounding systems. 120/G/ AC etwork Mode 120 T-TT 10.6 eakage Current at Uc Protection Mode ominal Discharge Current (In), 15 impulses 8/20 μs MC/MD Protection evel (Up) 1.5/0.9k Residual 5k 0.6k Short-Circuit Current Rating (SCCR) 10kAIC AC System Thermal Disconnector Internal Overcurrent Protection Fuses type gg 50A Max. x 18 x 58 Screw terminals, #4AWG Max. Disconnection Indicator 2 mechanical indicators Installation Ground Fault Breaker S or delayed -40 C to +85 C Operating Altitude Relative Humidity bus bars Weight IEC ITERATIOA E EUROPE F E FRACE U1449 3rd Edition Ordering Data ow oltage SPD - Test Class II ow oltage SPD - Test Class II ow oltage SPD - Test Class II Approval in process Ft GDT C : High-energy varistor GDT: High energy gas tube Ft: Thermal fuse C: Remote signaling contact t 0 : Thermal disconnection system 120/G/ Bus bars SPD 2P IK SPD 3P IK SPD 4P IK

6 I For transient voltage protection of single-phase devices. ocal indicator (red ED) warns replacement is needed. I 120/10kA AC etwork 120 Mode T-TT Max load current 16A eakage Current at Uc Follow Current ominal Discharge Current (In), 15 impulses 8/20 μs 5kA 10kA Protection evel (Up) 0.7k Short-Circuit Current Rating (SCCR) 10kAIC AC System Thermal Disconnector U Internal Overcurrent Protection Remote Signal Indicator Operating Altitude x 18 x C to +85 C Ft Ft GDT : MO GDT: Gas tube Ft: Thermal fuse t 0 : Thermal disconnection mechanism Relative Humidity Weight 120 AC IEC ITERATIOA Class II, Class III E EUROPE Class II, Class III F E FRACE Class II, Class III Ordering data I 120/10kA x I 120/10kA ( ) 6

7 Basic configurations 1 / / / SPD parts needed: om. Description Part umber Qty Qty Qty 110/ / / All SPD 2P ink All SPD 3P ink Basic configurations SPD parts needed: om. Description Part umber Qty 110/ / / All SPD 4P ink

8 Basic configurations 3 TT network om: TT network 3 SPD parts needed: om. Description Part umber Qty /G/ SPD parts needed: om. Description Part umber Qty 110/ / / All /PE All SPD S ink 1/ Subject to technical changes 7/11-2.5M-IT1008