812/ 814/ 815 digital timers

Transcription

1 8/ 84/ 85 digital timers Relay output digital timer Multirange Multivoltage or relay outputs Reset function on panel (imers 85) Data saved in the event of a break in supply (imer 85) Access to programming lockable (imer 84 and 85) p or down timing mode Internal power supply by battery (0 years / 0 C) Specifications ype Functions Connections Relay outputs Supply voltage Nominal rating Code imer 8 A 8pin plugin double timed changeover 4 V AC DC x 5 A A 8pin plugin double timed changeover 0 V AC x 5 A A 8pin plugin double timed changeover 0 40 V AC x 5 A imer 84 A, B, C, D, Di, H 8pin plugin timed changeover VDC/4 to V ACDC 8 A A, A, AM, AMt pin plugin timed changeover or instantaneous 4 V AC/0 to 40V AC x 8 A A, A, AM, AMt pin plugin timed changeover or instantaneous VDC/4 to V ACDC x 8 A A, B, C, D, Di, H pin plugin timed changeover 4 V AC/0 to 40 V AC 8 A imer 85 A, A, AM, AMt pin plugin timed changeover or instantaneous V DC / 4 to V AC DC x 8 A A, A, AM, AMt pin plugin timed changeover or instantaneous 4 V AC DC / 0 V AC x 8 A A, A, AM, AMt pin plugin timed changeover or instantaneous 4 V DC / 0 to 40 V AC x 8 A Accessories Code Asymmetrical adaptor A pin solderconnected plug 5 0 pin solderconnected plug 5 0 Spring clips 0 pin connector socket 5 0 8pin connector socket 5 8 pole rear base 4 00 Curves Function A Function A Function A t< t< Delay on energisation timed relay Delay on energisation timed relay instantaneous relay 8 8 t< t< Delay on energisation timed relays Function AM Function AMt Function B t t Delay on energisation Memory during and after timing. Reset =tt t t =tt Delay on energisation Memory during timing. Reset iming on impulse (one shot) Function C Function D Function Di 5 iming after impulse (delay off) Flipflop Flipflop Function H iming or energisation o order, see page CH 545 Busslingen el. 4 (0)5 8 8 Fax 4 (0)5 0

2 General characteristics Display Number of digits 4 Height of digits 8 mm Precision iming ranges s / s / s / mn 5 s / mn / mn mn / h 5 mn / h / h / h Repetition accuracy (with constant parameters) ± 0.0 % ± 0 ms Display accuracy ± 0.0 % ± 0 ms Min. control pulse Maximum reset time by deenergisation during timed delay Maximum reset time by deenergisation after timing Output specification Nominal rating IMER : 8 A AC 8 A DC, IMER 8 : 5 A AC 5 A DC Max. breaking voltage 50 AC 0 V DC Maximum power rating (resistive) IMER 85 : 000 VA 0 W, IMER 8 : 50 VA 0 W Maximum admissible current 5 A < 0.0 s Minimum current 00 ma Electrical life at I max., 50 V AC resistive (cycles) 0 5 Max. permitted number of operations at max 50 V AC resistive per hour 00 Mechanical life (operations) 5 x 0 Function and use Voltage variation IMER 84 : 0 % 5 % Immunity from micro power cuts < 0.0 s Max. absorbed power 0.5 W / V VA / 4 V 0.5 W / 4 V.5 VA / 0 V W / V VA / 0 V emperatures limits use ( C) 0 C 0 C emperature limits stored ( C) 0 C 0 C Degree of protection front face IP5 Insulation according to standard VDE 00IEC 55 group C Protection class according to E C 000 IEC 5 DIN Conformity to standards ICE 55 VDE Mounting Front panel, by clip Mounting basemounted on socket Material Selfextinguishing L 4 grade Vo Weight (g) IMER 84 : 00, IMER 8 85 : 40 CH 545 Busslingen el. 4 (0)5 8 8 Fax 4 (0)5 0

3 VALID MODE Dimensions Panel cutout, 4, pole rear base 4 00 Panelmounted 8pin or pin solder connected plug B Panel thickness to.5 mm C Clip for panelmounting D Positioning screw Connector socket pin 5 0 8pin ,5 5,5 0, 4 4 8, CH 545 Busslingen el. 4 (0)5 8 8 Fax 4 (0)5 0

4 Connections imer 8 pin imer 8 8pin imer 84 pin Supply imed output contact 85 imed output contact imer 84 8 pin imer 84 pin imer 84 8pin B Other loads may be connected in parallel imer 85 pin Reset B Other loads may be connected in parallel Supply () Bridge 5 Control contact or reset imed output contact imer 85 pin / Supply () Bridge imed output contact 8 imed or instantaneous output contact B Other loads may be connected in parallel Supply (8) Bridge Control contact reset imed output contact CH 545 Busslingen el. 4 (0)5 8 8 Fax 4 (0)5 0

5 8 digital timers 8 Relay output Multirange Multivoltage relay output Access to programming locked p or down timing mode Internal power supply by battery (0 years / 0 C) Specifications ype Functions Connections Relay outputs Supply voltage Nominal rating Code imer 8 A, B, C, D, Di, H 8pin plugin timed changeover 4 V AC DC/ V AC DC 8 A A, B, C, D, Di, H 8pin plugin timed changeover 4 V AC DC/0 V AC 8 A A, B, C, D, Di, H 8pin plugin timed changeover 4 V AC DC/0.40 V AC 8 A A, B, C, D, Di, H pin plugin timed changeover 4 V AC DC/ V AC DC 8 A A, B, C, D, Di, H pin plugin timed changeover 4 V AC DC/ V AC DC 8 A A, B, C, D, Di, H pin plugin timed changeover 4 V AC DC/0. 40 V AC 8 A Accessories Code Asymmetrical adaptor A pin solderconnected plug 5 0 pin solderconnected plug 5 0 8pin solderconnected base 4 0 Spring clips 0 pin connector socket 5 0 8pin connector socket 5 8 pin rear base 4 00 Connections imer 8 pin imer 8 8pin imer 8 pin B Other loads may be connected in parallel B Other loads may be connected in parallel Supply () Bridge for 4 V supply 5 Control contact reset imed output contact imer 8 8pin Supply (8) Bridge for 4 V supply Control contact reset imed output contact 8 4 o order, see page CH 545 Busslingen el. 4 (0)5 8 8 Fax 4 (0)5 0

6 General characteristics Display Number of digits 4 Height of digits mm Precision iming ranges s s s mn 5 s mn mn mn h 5 mn h h h Repetition accuracy (with constant parameters) ± 0.0 % ± 0 ms Display accuracy ± 0.0 % ± 0 ms Min. control pulse Maximum reset time by deenergisation during timed delay Maximum reset time by deenergisation after timing Output specification Nominal rating 8 A AC 8 A DC Max. breaking voltage 50 AC 0 V DC Maximum power rating (resistive) 000 VA 0 W Maximum admissible current 5 A < 0.0 s Minimum current 00 ma Electrical life at I max., 50 V AC resistive (cycles) 0 5 Max. permitted number of operations at max 50 V AC resistive per hour 00 Mechanical life (operations) 5 x 0 Function and use Voltage variation 0 % 5 % Immunity from micro power cuts < 0.0 s Maximum power consumption 0.5 W/4 V.5 W/ V VA/4 V, 5, VA/ V 4 VA/0 V VA/0 V emperatures limits use ( C) 0 0 emperature limits stored ( C) 0 0 Degree of protection front face IP5 Insulation according to standard VDE 00IEC 55 group C Protection class according to E C 000 IEC 5 DIN Conformity to standards ICE 55 VDE Mounting Front panel, by clip Mounting basemounted on socket Material Selfextinguishing L 4 grade Vo Weight (g) 00 Curves Function A Function B Function C 5/ 5/ Delay on energisation timed relay iming on impulse (on shot) iming after impulse (delay off) Function D Function Di Function H Flipflop Flipflop iming or energisation CH 545 Busslingen el. 4 (0)5 8 8 Fax 4 (0)5 0

7 VALID MODE Dimensions Panel cutout, 4, pole rear base 4 00Panelmounted 4 5 0,5 8pin or pin solderconnected plug ,5 0, B Panel thickness to.5 mm C Clip for panelmouting D Positioning srew 8pin solderconnected base 4 0, 4,8x0, Ø 8, 5, Connector socketpin 5 0 8pin 5 8 B holes CH 545 Busslingen el. 4 (0)5 8 8 Fax 4 (0)5 0