High-current Dual-current

Size: px

Start display at page:

Download "High-current Dual-current"

John Morton
5 years ago
Views:

Standard 8 86 Function Connections I (changeover) WS 8 86 I (changeover) W7S 8 86 I (changeover) FD 8 86 I (changeover) XA* - XS* - XA* - XS* - XA* - XS* - FB - FG - CD** - 8 8 8 8 8 8 8 86 CB** -

1 Sealed V Sealed IP 67 protection Nominal ratings. A to A/5 VAC Minimum rating ma/ VDC Operating temperature - C to +5 C Choice of actuators with possible fixing positions Main specifications High-current 8 8 Dual-current 8 8 Medium current 8 8 Standard 8 86 Function Connections I (changeover) WS 8 86 I (changeover) W7S 8 86 I (changeover) FD 8 86 I (changeover) XA* - XS* - XA* - XS* - XA* - XS* - FB - FG - CD** CB** - CG** WS - W7S - FD - FB - FG - (normally closed) CD** - CB** - CG** C WS - W7S - FD - FB - FG - (normally open) CD** - CB** - CG** Electrical characteristics ating nominal / 5 V AC (A) 6 6 ating thermal / 5 V AC (A) Mechanical characteristics Maximum operating force (N) Min. elease force (N) Maximum total travel force (N) 5... Max. permitted overtravel force (N) Maximum rest position (mm) Tripping point (mm) 8. ±. 8. ±. 8. ±. 8. ±. Maximum differential travel (mm).... Min. overtravel (mm) Ambient operating temperature for blade version ( C) Ambient operating temperature for wires/cable version ( C) Mechanical life (operations) 6 x 6 x 6 x 6 Contact gap (mm).... Weight (tag version) g Comments * Type 8 8 available on request ** Cable version for types 8 8, 8 8 and 8 86 Additional specifications # Components Material - Case : polyester UL 9VO - Button : polyester - Membrane : silicon - Contacts : AgCdO or AgSnO gold-plated AgNi (dual-current) - Terminals : silver-plated, tinned brass - Cable/Lead : PVC Levers - Flat : stainless steel - oller : stainless steel, polyamide roller Product adaptations Special levers Specific fixings Special leads, cables, cable harnesses NF - UL - cul approvals To order, see page 9 CH - 55 Busslingen Tel. + () Fax + ()56

2 ,5,5 Principles Single break changeover switch Curves Operating curve 5 VAC Switch rating with DC supply 6 x V V esistive A 6 A A 6 A Inductive L/ 5 ms A 6 A A 6 A esistive A 6 A A 6 A Inductive L/ 5 ms 5 A 5 A A 5 A B C D Number of cycles esistive circuit Current in Amps Model 8 8 is designed to operate equally well on dual-current ( ma V minimum) or medium-current (6 A maximum) circuits. However, a given product should only be used to switch one type of circuit during its working life. Dimensions Product Symmetrical version types 8 8 / 8 / 8 / 86 = 7,6 max.,5 +,5,5 ±, ±, 7,5 ±,,5 9,5 ±, = = 7,5 7,5 =,5 ±, 7, -, 5, ±, Asymmetrical version types 8 8 / 8 / 8 / 86 =,6 5,8 = Fixed by M screws Torque with screw only :. Nm, with screw + washer :. Nm B OL = 7.6 max. Connections WS Solder 6, ±, 9,9 +, -, W7S Faston.8 x.5 XA Straight PCB output 5,7 ±,, Ø,8 -, 8, ±,,55,8 Ø, =,5 7,5 7,5 7,5 7,5,8,8 CH - 55 Busslingen Tel. + () Fax + ()56

3 XS Straight PCB output XA - XS Side outputs, PCB rear XA - XS Side outputs, PCB front,8 5,8 5,8 =,5 Lead outputs Lead/cable output CB cable output on bottom Cable outputs 6, 8,7 max. max. 6, max., max. B FG C FD D Standard 5 mm 9,9 88 / 8 8 / 8 86 =.5 mm 8 8 =.75 mm Ø5 max. B Standard 5 mm 88 / 8 8 / 8 86 =.5 mm 8 8 =.75 mm B CG C CD D Standard 5 mm 9,9 88 / 8 8 / 8 86 = x.5 mm Drilling Printed circuit board mounting Asymmetrical XA, XA, XA Printed circuit board mounting Symmetrical XS, XS, XS /,6 ±, ±, 5 / 5, ±, ±, Ø, ±, 7,5-7,6 ±, 5 / 5, ±, ±, ±, Ø, ±, B.C C.NO D.NC Mounting on a printed circuit board with fixing pins Asymmetrical B.C C.NO D.NC Mounting on a printed circuit board with fixing pins Symmetrical Actuator mounting positions Fixing position A 5,75,5 B CH - 55 Busslingen Tel. + () Fax + ()56

4 Actuators 7 A Flat 7 E oller 7 F Dummy roller. F x. x. ecommendations for operation from the side 5 max. Mounting accessories Fixing pins Fixing pins,6 -,,9 ±,,9 ±,,6 -, B X output B X output CH - 55 Busslingen Tel. + () Fax + ()56

5 Actuators and fixing positions Part numbers for standard actuators Actuators Flat 7A8. Flat 7A Flat 7A oller 7E Mounting position Coefficient Tripping point / 8 / 86 Part numbers for standard actuators.5 ±, 9. ±, ±,7 9.6 ± ±.6 ±,8 ± 8.8 ±,8. ± 9. ±, ±,.5 ±,9 Actuators Dummy roller 7F 9.5 Screw 7D * Transverse roller 7 EL * Mounting position Coefficient Tripping point.5.9 ±,5.9 ±, Except where otherwise indicated, levers are supplied unmounted. For factory mounting, specify fixing position A or B. * To special order Other information Mounting - Operation See basic technical concepts Degree of protection - Tag version : casing = IP67 terminals = IP - Lead/cable version : output/casing = IP67 To calculate force : divide the switch force by the coefficient in the table. To calculate travel : multiply the switch travel by the same coefficient. CH - 55 Busslingen Tel. + () Fax + ()56

18/06/2013

18/06/2013 V4 8318 Sealed High-current 83180 Part number made to order IP 67 protection Nominal ratings 0.1 A to 10 A / 250 VAC Minimum rating 1 ma / 4 VDC Operating temperature -40 C to +125 C Choice of actuators