Architecture - Engineering - Planning

Transcription

1 Architecture - Engineering - Planning Mansfield, Ohio New Philadelphia, Ohio Powell, Ohio phone phone phone fax fax fax SHOP DRAWING REVIEW PROJECT NAME: Shelby High School JOB NO: 08-ED1-052 SUBMITTAL ITEM: Surge Protection Devices SPEC. REFERENCE: MANUFACTURER: Varies REVIEWED REVISE AND RESUBMIT REVIEWED AS NOTED NOT ACCEPTED Checking is only for conformance with the design concept of the project and compliance with the information given in the contract documents. The Contractor is responsible for dimensions to be confirmed and correlated at the job site. For information that pertains solely to the fabrication processes or to techniques of construction and for coordination of the work of all trades. DATE: BY: TMM COMMENTS: THE FOLLOWING COMMENTS HAVE NOT BEEN MARKED ON THE ATTACHED SHOP DRAWINGS: GENERAL ITEMS: 1. The SPD device for the designated T panelboards shall be provided with spare modules per Nameplate quantity and nomenclature is the responsibility of the contractor and as per Spec Section Provide arc flash labeling per Spec Section Shop drawing # and #

2 Shelby New 9-12 High School Resub Spec Section Surge Protection Devices Approval Drawing Package Factory Order #: Distributor: N/A Contractor / Installer: N/A Consulting Engineer: N/A Steve Brubaker Sales Representative Simeone Dominijanni Project Manager North American Operating Division simeone.dominijanni@schneider-electric.com Make the most of your energy SM

3 2 of 17

4 3 of 17

5 4 of 17

6 5 of 17

7 6 of 17

8 7 of 17

9 8 of 17

10 9 of 17

11 10 of 17

12 11 of 17

13 Internal Modular SPDs Square D Internally Mounted Surge Protective Devices Square D TM brand Surgelogic TM internal modular Surge Protective Devices (SPDs) deliver specification grade performance for service entrance or critical branch panel applications. This multiphase system provides suppression for all critical modes inside electrical equipment and shorter lead lengths with superior SPD performance. TM 12 of 17

14 Internal Modular SPDs Features 02 Internal panel modular Surge Protective Devices (SPDs) provide superior design and service life for a wide variety of commercial, industrial, or institutional applications. Square D brand SurgeLogic SPDs offer first-rate performance and surge suppression for demanding service entrance applications or as part of a suppression network. The robust modular construction reduces possible down time and maintenance costs. Superior Performance Surgelogic SPDs utilize a high-energy suppression circuit that provides 10 modes of suppression from 120,000 to 480,000 peak Amps of surge current rating per phase. Modular SPDs feature circuity that provides not only transient surge suppression, but also noise filtration. Installation Integral solutions come professionally pre-wired into electrical gear and panels from the factory insuring short lead lengths and high performance. All units are tested at the factory before delivery to their final destination, maintaining Square D brand s high standard of quality. There is also no need for additional enclosures or installation labor costs. Warranty Surgelogic internal modular SPDs have a 10-year warranty. FEATURES ADVANTAGES BENEFITS Integral to electrical gear and panels 120,000 to 480,000 Amp Capacity (depending on model) SPDs are professionally installed inside electrical gear and panels Longer service life and suppression against high-energy lightning strikes Delivers high levels of SPD performance and saves on enclosure and installation expenses High performance surge suppression even in severe electrical conditions EMI/RFI Noise Rejection Increased transient suppression Improves surge suppression to the equipment Advanced Diagnostics Suppression Status Alarms Coordinated Fuse Technology Allows for online testing of the suppressor s functionality Allows multiple methods of alarm notification Coordinated fusing allows disconnection methods for thermal and high-current events Provides immediate response if suppressor is damaged Provides immediate notification through audible, visual and remote signaling if reduced suppression occurs Provides premium surge suppression while managing both thermal and high-current end-oflife events Schneider Electric USA, Inc S W., Salt Lake City, UT 84104, USA Telephone: (801) Fax: (801) Schneider Electric. All rights reserved. 13 of 17 Document Number C March 2011 bw

15 Internal Modular SPDs Features (continued) 03 NQ/NF Panelboard Internal SPDs NQ and NF panelboards are primarily used for lighting and power distribution up to 600 Amps. These panelboards, following the 2008 National Electric Code changes, provide electrical capacity up to 84 circuit breakers. Both types of panels are designed with 200% rated copper neutrals for non-linear loads. (NQ max volts 240 Vac, NF max volts 600/347 Vac) SPD available surge current ratings: 120, 160, 240 ka QED Switchboard Performance Surge Current Rating per Phase Up to 480kA Short Circuit Current Rating 200kA Modes of Protection 10 Fusing Individually fused MOVs Thermal Fusing Yes Ocercurrent Fusing Yes Filtering Yes Operating Frequency 50/60 Hz Mechanical Description Connection Method #10-#2 AWG Terminals Mounting Method/Circuit Type Parallel Operating Altitude Sea Level-12,000 (3,658 m) Storage Temperature -40 F (-40 C) to 149 F (65 C) Operating Temp. -4 F (-20 C) to 149 F (65 C) LCD Operating Temp. 32 F (0 C) to 149 F (65 C) Operating Humidity 0 to 95% non-condensing QED Switchboards are made for use as service entrance equipment or as distribution centers in commercial, institutional, and industrial applications. QEDs are extremely versatile providing front accessible load connections with multiple breaker and fusible switch options. QEDs enable easy access to power monitoring equipment such as products from our PowerLogic TM brand. (Max volts 600 Vac, max current 4,000 Amps) SPD available surge current ratings: 120, 160, 240, 320, 480 ka Diagnostics Push to test diagnostic switches, red and green status LEDs per phase (internal redundant status LEDs are green), module status LEDs per mode, dry contacts, audible alarm with disable switch, surge counter. Options Remote monitor Safety and Performance culus Listed per UL1449 3rd Edition Type 2 SPD, UL th Ed., and CAN/CSA C22.2 No. 8-M1986. Complies with UL 96A 12th Ed. Master Label requirements for Lighting Protection Systems Schneider Electric USA, Inc S W., Salt Lake City, UT 84104, USA Telephone: (801) Fax: (801) Schneider Electric. All rights reserved. 14 of 17 Document Number C March 2011 bw

16 Internal Modular SPDs Features (continued) 04 Power-Zone TM Switchgear QMB Panelboard The Square D brand Power-Zone 4 low voltage metal-enclosed drawout switchgear is designed to provide superior electrical distribution and power quality management. Power-Zone 4 switchgear is designed to deliver maximum uptime, system selectivity, and ease of maintenance. All of these features are packed into one of the smallest footprints available for low voltage drawout switchgear. (Max volts 600 Vac, max current 5,000 Amps) SPD available surge current ratings: 120, 160, 240, 320, and 480 ka When specifications or electrical codes call for a fusible panelboard, the QMB family offers superior performance and time-saving installation features. The reliability of the QMB panelboard makes it the product of choice for large commercial and industrial applications. (Max volts 600 Vac, max current 400 Amps) SPD available surge current ratings: 120, 160, 240 ka Motor Control Center Busway The feature-rich modular design minimizes space and maximizes ease-of-use and accessibility of motor control devices. The Model 6 MCC has integrated industry-leading components into the smallest and one of the most flexible footprints possible to meet industry s power, control, and automation needs. (Max volts 480 Vac, max current 2,500 Amps) SPD available surge current ratings: 120, 160, 240 ka Square D brand I-Line TM Busway is engineered to replace old cable and conduit systems. This nextgeneration power distribution system is loaded with exceptional features, including a 200% neutral and a 100% isolated ground path. (Max volts 600 Vac, max current 5,000 Amps) SPD available surge current ratings: 120, 160, 240 ka Schneider Electric USA, Inc S W., Salt Lake City, UT 84104, USA Telephone: (801) Fax: (801) Schneider Electric. All rights reserved. 15 of 17 Document Number C March 2011 bw

17 Internal Modular SPDs Specifications 05 Voltage Surge Current per Phase Modes of Protection Configuration Model Number MCOV I n 208Y/120 series also applies to the following voltage 220Y/ Y/277 series also applies to the following voltages 380Y/220, 400Y/230, and 415Y/240 VPR L-N L-G L-L N-G 120/240V 120kA 6 1 Ø, 3-wire+G TVS1IMA12_ 150V 20kA 700V 800V 1200V 700V 208Y/120V 120kA 10 3 Ø, Wye, 4-wire+G TVS2IMA12_ 150V 20kA 700V 800V 1200V 700V 480Y/277V 120kA 10 3 Ø, Wye, 4-wire+G TVS4IMA12_ 320V 20kA 1200V 1200V 2000V 1200V 600Y/347V 120kA 10 3 Ø, Wye, 4-wire+G TVS8IMA12_ 420V 20kA 1500V 1500V 2500V 1500V 120/240V 160kA 6 1 Ø, 3-wire+G TVS1IMA16_ 150V 20kA 700V 800V 1200V 700V 208Y/120V 160kA 10 3 Ø, Wye, 4-wire+G TVS2IMA16_ 150V 20kA 700V 800V 1200V 700V 480Y/277V 160kA 10 3 Ø, Wye, 4-wire+G TVS4IMA16_ 320V 20kA 1200V 1200V 2000V 1200V 600Y/347V 160kA 10 3 Ø, Wye, 4-wire+G TVS8IMA16_ 420V 20kA 1500V 1500V 2500V 1500V 120/240V 240kA 6 1 Ø, 3-wire+G TVS1IMA24_ 150V 20kA 700V 800V 1200V 700V 208Y/120V 240kA 10 3 Ø, Wye, 4-wire+G TVS2IMA24_ 150V 20kA 700V 800V 1200V 700V 480Y/277V 240kA 10 3 Ø, Wye, 4-wire+G TVS4IMA24_ 320V 20kA 1200V 1200V 2000V 1200V 600Y/347V 240kA 10 3 Ø, Wye, 4-wire+G TVS8IMA24_ 420V 20kA 1500V 1500V 2500V 1500V 120/240V 320kA 6 1 Ø, 3-wire+G TVS1IMA32_ 150V 20kA 700V 800V 1200V 700V 208Y/120V 320kA 10 3 Ø, Wye, 4-wire+G TVS2IMA32_ 150V 20kA 700V 800V 1200V 700V 480Y/277V 320kA 10 3 Ø, Wye, 4-wire+G TVS4IMA32_ 320V 20kA 1200V 1200V 2000V 1200V 600Y/347V 320kA 10 3 Ø, Wye, 4-wire+G TVS8IMA32_ 420V 20kA 1500V 1500V 2500V 1500V 120/240V 480kA 6 1 Ø, 3-wire+G TVS1IMA48_ 150V 20kA 700V 800V 1200V 700V 208Y/120V 480kA 10 3 Ø, Wye, 4-wire+G TVS2IMA48_ 150V 20kA 700V 800V 1200V 700V 480Y/277V 480kA 10 3 Ø, Wye, 4-wire+G TVS4IMA48_ 320V 20kA 1200V 1200V 2000V 1200V 600Y/347V 480kA 10 3 Ø, Wye, 4-wire+G TVS8IMA48_ 420V 20kA 1500V 1500V 2500V 1500V Voltage Surge Current per Phase Modes of Protection Configuration Model Number MCOV I n VPR L-N H-N L-G H-G L-L H-L N-G 240/120HLD 120kA 10 3 Ø, HLD, 4-wire+G TVS3IMA12_ 150V 20kA 700V 1200V 800V 1200V 1200V 1500V 700V 240/120HLD 160kA 10 3 Ø, HLD, 4-wire+G TVS3IMA16_ 150V 20kA 700V 1200V 800V 1200V 1200V 1500V 700V 240/120HLD 240kA 10 3 Ø, HLD, 4-wire+G TVS3IMA24_ 150V 20kA 700V 1200V 800V 1200V 1200V 1500V 700V 240/120HLD 320kA 10 3 Ø, HLD, 4-wire+G TVS3IMA32_ 150V 20kA 700V 1200V 800V 1200V 1200V 1500V 700V 240/120HLD 480kA 10 3 Ø, HLD, 4-wire+G TVS3IMA48_ 150V 20kA 700V 1200V 800V 1200V 1200V 1500V 700V MODEL NUMBER SUFFIX CODES P B Z Q M O Model numbers not recognized as line items in Schneider Electric ordering system until a suffix code is applied HLD = High-leg delta NQ/NF panelboard (Not available in 320 and 480 ka) QED switchboard PZ3/PZ4 switchgear (Not available in TVS1 or TVS3) QMB switchboard (Not available in 320 and 480 ka) Motor Control Center (Not available in 320 and 480 ka) OEM kit (Not available in 320 and 480 ka) SPD OPTIONS Remote Monitor TVS12RMU Schneider Electric USA, Inc S W., Salt Lake City, UT 84104, USA Telephone: (801) Fax: (801) Schneider Electric. All rights reserved. 16 of 17 Document Number C March 2011 bw

18

19 APPROVAL DRAWING SUBMITTAL PACKAGE SUBMITTED AS EXTERNAL SPD UNIT FOR MSB. TO BE INSTALLED ON TOP OF SWITCH GEAR ON A 100A/3P SWITCH LOCATED IN THE TOP POSITION OF THE SWITCH GEAR SECTION NEAREST THE MAIN SWITCH. ROD MATNEY - CARTER ELECTRIC, INC. PROJECT Shelby High School PRODUCT Surge Protective Devices School District Shelby City Schools Shelby, OH Electrical Consulting Firm MKC Associates Inc Mansfield, OH Construction Management Barton Malow Company Columbus, OH Electrical Contractor Carter Electric Galion, OH Distributor Graybar Mansfield, OH Advanced Protection Technologies, Inc th Street N., Clearwater, FL (727) Fax (727) Toll Free (800) info@apttvss.com "Professionals Serving Professionals"

20 APPROVAL DRAWING SUBMITTAL PACKAGE Shelby High School Table of Contents Products Item Qty Model Voltage Location 1 1 TE04XAS40E1X 480Y/277V 3ph, 4w +grd External to MSB Documents Included: Product Information Sheet TEXAS Cut Sheet TEXA Electrical Drawing TEXA K Mechanical Drawing TEXAS UL Letters Series ND Page 1 Warranty, 10 year Advanced Protection Technologies, Inc th Street N., Clearwater, FL (727) Fax (727) Toll Free (800) info@apttvss.com "Professionals Serving Professionals"

21 APPROVAL DRAWING SUBMITTAL PACKAGE Product Information for Item: 1 TE04XAS40E1X Product Features and Specifications: Options: Shelby High School UL rd Edition Listed UL 1283 Complimentary Listing UL 3rd Edition Inominal Rating: 20 ka UL 3rd Edition Type Rating: Type 1 Mode of Protection - L-N Mode of Protection - L-G Mode of Protection - N-G Surge Current Rating Per Phase: 400 ka Surge Current Rating - L-N: 200 ka Surge Current Rating - L-G: 200 ka Surge Current Rating - N-G: 200 ka Short Circuit Current Rating: 200kA per UL rd Edition (SCCR) UL rd Edition VPR (6kV, 3kA) - L-N: 1200 Volts UL rd Edition VPR (6kV, 3kA) - L-G: 1000 Volts UL rd Edition VPR (6kV, 3kA) - N-G: 1000 Volts UL rd Edition VPR (6kV, 3kA) - L-L: 1800 Volts EMI/RFI Filtering: Up to -50dB from 100kHz to 100MHz db MCOV: 320 Volts Suppression Technology: Large Block 50kA MOV Connection Method: Parallel Disconnect Method: Circuit breaker in panel Mounting Method: Surface Installation Method: External Overcurrent Protection Method: Individually Fused per MOV Thermal Cutout Circuit: For each MOV Module Connection Method: Bolted to backplane Enclosure Rating: NEMA 1/12/3R/4 Dimensions: 12X12X7 HxWxD" Typical Weight: 24 lbs. Audible Alarm Silence Switch for Audible Alarm Warranty Period: 10 Years Dry Contacts Surge Counter cul Listed Advanced Protection Technologies, Inc th Street N., Clearwater, FL (727) Fax (727) Toll Free (800) info@apttvss.com "Professionals Serving Professionals"

22 APPROVAL DRAWING SUBMITTAL PACKAGE Product Information for Item: 1 TE04XAS40E1X Shelby High School 40: Increase Surge Current to 400kA/phase E1: NEMA 1/12/3R/04 Steel Enclosure X: Surge Counter Advanced Protection Technologies, Inc th Street N., Clearwater, FL (727) Fax (727) Toll Free (800) info@apttvss.com "Professionals Serving Professionals"

23 TEXAS Series Type 1 Surge Protective Device/SPD/TVSS Features: All UL required OCP & Safety Coordination included inside Can be installed line-side or load-side of main disconnect Performance Specifications Surge Capacities L-N L-G N-G 100kA/phase 50kA 50kA 50kA 150kA/phase 100kA 50kA 50kA 200kA/phase 100kA 100kA 100kA 250kA/phase 150kA 100kA 100kA 300kA/phase 150kA 150kA 150kA 400kA/phase 200kA 200kA 200kA 500kA/phase 250kA 250kA 250kA UL 1449 Third Edition Listed, cul, UL 1283 R/C UL Type 1 SPD (cul Type 2 optional) UL tested Inominal: 20kA & 10kA UL tested SCCR: 200kA & 100kA UL Voltage Protection Ratings (VPRs): 208Y/120V: as low as 600V 480Y/277V: as low as 1000V Less than 1 nanosecond response time Repetitive Impulse: 5,000 hits AC Sinewave Tracking Filter with EMI/RFI Filtering up to -50dB from 10kHz to 100MHz Diagnostic Monitoring 100% monitoring Every MOV is monitored, incl. N-G Green LED Status indicator per phase Red LED service indicator Audible Alarm with Silence Switch Test Function: toggles red service LED, audible alarm & dry contact (if equipped) N-G overvoltage detection Phase Loss monitoring (toggles LED & dry contacts) Electrically isolated circuitry ensures surges do not damage diagnostics Form C Dry Contacts, 240V, 5A (two sets) Optional Surge Counter, six-digit LCD, with test function, reset & no-maintenance Eprom memory Design Features Designed, Manufactured & Tested consistent with: ANSI/IEEE C , C , and C NEMA LS-1 NEC Article 285 IEC High Energy Parallel Design for Category C3 & C-High applications For External Mounting next to Switchgear, Motor Controls Centers or Panelboards Individually Fused & Thermally Protected MOVs Large-Block, 34mm square, 50kA MOVs Replaceable Module Construction Solid State Bidirectional Operation Physical Specifications Relative Humidity Range: 0-95% non-condensing Operating Frequency: 47-63Hz Operating Temperature: -25 C (-15 F) to +60 C (140 F) Weight: 24 lbs (11 kg) Standard NEMA 1/12/3R/4 enclosure Standard size: 12 x 12 x 6.5 (305mm x 305mm x 165mm) Lug size: #2 - #14 AWG (w/opt. disconnect: #6 - #1/0) Typical connection: #6 AWG and 60A breaker Quality, Standards & Validation UL 1449 Third Edition, cul, UL 1283 R/C UL file: VZCA.E at RoHS-compliant IEC 61643, CE 10 year warranty (longer optional) Burn-In tested Prior to Shipment ISO 9001:2008 Quality Management System ISO 17025:2005 Laboratory Qualification Made in USA Advanced Protection Technologies th Street North Clearwater, Florida (800) (727) Fax (727) info@apttvss.com info@aptsurge.com

24 TEXAS MODEL NUMBER CONFIGURATOR & OPTIONS TE XAS... Voltage Code for Electrical System Surge Current Rating Options = = = = = = 15 = 254/127V Split Phase - 1Ø 3W+Grnd (Fig 1) 18 = 480/277V 2-Pole, (480/240V Split Phase) (Fig 1) 21 = 220Y/127V Wye - 3Ø 4W+Grnd (Fig 2) 41 = 520Y/300V Wye - 3Ø 4W+Grnd (Fig 2) 42 = 415Y/240V Wye - 3Ø 4W+Grnd (Fig 2) 43 = 400Y/230V Wye - 3Ø 4W+Grnd (Fig 2) 44 = 440Y/250V Wye - 3Ø 4W+Grnd (Fig 2) 51 = 480V B Corner Grnd Delta, 3Ø 3W+Grnd (Fig 6) (450kA replaces 400kA or 500kA) 06 = 240V Delta - 3Ø 3W+Grnd (Fig 4) (450kA replaces 400kA or 500kA) 61 = 240V B Corner Grnd Delta, 3Ø 3W+Grnd (Fig 6) (450kA replaces 400kA or 500kA) 07 = 380Y/220V Wye - 3Ø 4W+Grnd (Fig 2) 09 = 600V Delta - 3Ø 3W+Grnd (Fig 4) & HRG Wye (Available: 100kA, 150kA, 200kA, 250kA) 91 = 600V B Corner Grnd Delta, 3Ø 3W+Grnd (Fig 6) (Available: 100kA, 150kA, 200kA, 250kA) 11 = 120V Single Phase (Fig 5) 12 = 240V Single Phase (Fig 5) - Not split phase 13 = 127V Single Phase (Fig 5) 14 = 300V Single Phase (Fig 5) 16 = 277V Single Phase (Fig 5) 17 = 480V Single Phase (1 Hot, 1 Neu, 1 Grnd) (Fig 5) = = = = = = = (Voltage Codes 05, 51, 06 & 61) = Enclosure Rating X E = Surge Counter, six-digit LCD counter includes maintenance-free Eprom memory backup = Remote Locatable Display on 4 ft Cable custom cable lengths available F = Noise Filtering - Extended Range & Attenuation (available on 400kA & 500kA models) D = Rotary Disconnect Switch, Bussmann, UL98 T = Thru-Door Rotary Disconnect Switch, Bussmann, UL98, E1 enclosure only (Consult factory for other disconnect switch options) 2 = Type 2 SPD Bearing cul Mark Delete Options - Consult Factory for Order Code Delete L-N Protection (reduces ka rating) Delete L-G Protection (reduces ka rating) Delete N-G Protection (reduces ka rating) Delete Noise Filtering Available Accessory (order separately) RM = Remote Monitor = = (polycarbonate, display inside clear front door) = (display inside door) = = (Optional rotary disconnect increases enclosure sizes to 16 x 14 x 6 on models > 300kA) Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 } } V V Hot (BLK) Phase A (BLK) A B Phase B (BLK) Neutral (WHT) Neutral (WHT) N Hot (BLK) V } Phase C (BLK) Ground (GRN) C Ground (GRN) Phase A (BLK) Phase B (ORNG) Phase B (BLK) }VV Phase C (BLK) Neutral (WHT) Ground (GRN) Phase A (BLK) Hot (BLK) A (BLK) }VPhase }V } Phase C (BLK) Neutral (WHT) Phase C (BLK) Ground (GRN) Ground (GRN) Ground (GRN) SPLIT 2 Hots, 1 Neu, 1 Grnd Performance Data WYE 3 Hots, 1 Neu, 1 Grnd Common North American Systems HI-LEG DELTA (B High) 3 Hots, (B HIGH), 1 Neu, 1 Grnd UL 1449 THIRD Edition (Sept 2009) Test Data Voltage Protection Ratings (VPR - 3kA) L-N L-G N-G L-L 01 = 240/120V Split Phase (<300kA) Type 1 20kA 100kA = 240/120V Split Phase (=>300kA) Type 1 20kA 100kA = 208Y/120V 3Ø Wye (<300kA) Type 1 20kA 200kA = 208Y/120V 3Ø Wye (=>300kA) Type 1 20kA 200kA = 240Y/120V B High Leg Delta 700/ / Type 1 20kA 200kA 150 / = 480Y/277V 3Ø Wye (<300kA) Type 1 20kA 200kA = 480Y/277V 3Ø Wye (=>300kA) Type 1 20kA 200kA = 480V 3Ø Delta (<300kA) Type 1 10kA 200kA = 480V 3Ø Delta (=>450kA) Type 1 20kA 200kA = 380Y/220V 3Ø Wye (<300kA) Type 1 20kA 200kA = 600Y/347V 3Ø Wye (<300kA) Type 1 10kA 200kA = 600Y/347V 3Ø Wye (=>300kA) Type 1 20kA 200kA 420 Other Available Systems: Please see supplementary data sheet, contact us at info@apttvss.com, or confirm at using CCN of VZCA Optional disconnect switch may increase VPRs DELTA & HRG WYE 3 Hots, 1 Grnd SINGLE POLE 1 Hot, 1 Neu, 1 Grnd CORNER GROUND DELTA (B grounded) 2 Hots, 1 Grnd Advanced Protection Technologies th Street North Clearwater, Florida (800) (727) Fax (727) info@apttvss.com #8386

25

26

27 File E Project 09CA32494 September 17, 2009 REPORT On SURGE PROTECTION DEVICES (VZCA, VZCA7) ADVANCED PROTECTION TECHNOLOGIES Clearwater, FL The information contained in this document is an excerpt taken from the APT s UL File referenced above. The complete UL file is extremely lengthy but can be provided upon request. If you would like a copy of the complete UL File, please contact Customer Service at (800) Copyright 2009 Underwriters Laboratories Inc. Underwriters Laboratories Inc. authorizes the above-named company to reproduce this report provided it is reproduced in its entirety.

28 File E Vol. 1 Sec. 1 Page 1 Issued: and Report DESCRIPTION PRODUCT COVERED: USL - Surge Protection Devices, Type 1 SPD, Models TE or ST, followed by 01, 11, 12, 13, 14, 15, 16 17, 18, 02, 21, 03, 04, 41, 42, 43, 44, 05, 51, 06, 61, 07, 08, 09, or 91, followed by XA followed by S or L, followed by 05, 10, 15, 20, 25, 30, 31, 40, 45 or 50, followed by blank or options X, Y, Z, E, D, T, K, S, L, G, N, F, J, or P. USL, CNL Surge Protection Devices, Type 2 SPD, Models TE or ST followed by 01, 11, 12, 13, 14, 15, 16 17, 18, 02, 21, 03, 04, 41, 42, 43, 44, 05, 51, 06, 61, 07, 08, 09, or 91, followed by XA followed by S or L, followed by 05, 10, 15, 20, 25, 30, 31, 40, 45 or 50, followed by blank or options X, Y, Z, E, D, T, K, S, L, G, N, F, J, or P, followed by required option 2. NOMENCLATURE: TE 02 XA S 31 E1 X 2 I II III IV V VI VII VIII I. Prefix TE APT model number prefix ST SurgTec model number prefix (APT trademark)

29 File E Vol. 1 Sec. 1 Page 2 Issued: and Report II. System Voltage /120V 1Ø, 3W Plus Ground, ( 2 Lines, 1 Neutral, 1 Ground) /127V 1Ø, 3W Plus Ground, ( 2 Lines, 1 Neutral, 1 Ground) /277V 1Ø, 3W Plus Ground, ( 2 Lines, 1 Neutral, 1 Ground) Y/120V 3Ø, 4W Plus Ground ( 3 Lines, 1 Neutral, 1 Ground) Y/127V 3Ø, 4W Plus Ground ( 3 Lines, 1 Neutral, 1 Ground) /120V 3Ø, 4W Plus Ground High Leg Delta ( 3 Lines, 1 Neutral, 1 Ground) Y/277V 3Ø, 4W Plus Ground ( 3 Lines, 1 Neutral, 1 Ground) /300V 3Ø, 4W Plus Ground ( 3 Lines, 1 Neutral, 1 Ground) Y/240V 3Ø, 4W Plus Ground ( 3 Lines, 1 Neutral, 1 Ground Y/230V 3Ø, 4W Plus Ground ( 3 Lines, 1 Neutral, 1 Ground) Y/250V 3Ø, 4W Plus Ground ( 3 Lines, 1 Neutral, 1 Ground) V 3Ø, 3W Plus Ground ( 3 Lines, 1 Ground) V 3Ø, 3W Plus Ground Corner Grounded, Delta ( 2 Lines, 1 Ground) V 3Ø, 3W Plus Ground ( 3 Lines, 1 Ground) V 3Ø, 3W Plus Ground Corner Grounded, Delta ( 2 Lines, 1 Ground) Y/220V 3Ø, 4W Plus Ground ( 3 Lines, 1 Neutral, 1 Ground) Y/347V 3Ø, 4W Plus Ground ( 3 Lines, 1 Neutral, 1 Ground) V 3Ø, 3W Plus Ground ( 3 Lines, 1 Ground) V 3Ø, 3W Plus Ground Corner Grounded, Delta ( 2 Lines, 1 Ground) V Single Phase ( 1 Line, 1 Neutral, 1 Ground) V Single Phase ( 1 Line, 1 Neutral, 1 Ground) V Single Phase ( 1 Line, 1 Neutral, 1 Ground) V Single Phase ( 1 Line, 1 Neutral, 1 Ground) V Single Phase ( 1 Line, 1 Neutral, 1 Ground) V Single Phase ( 1 Line, 1 Neutral, 1 Ground) III. Model Number Series XA

30 File E Vol. 1 Sec. 1 Page 3 Issued: and Report IV. Configuration S Standard Configuration (L-N, L-G, N-G) L 10 mode Configuration (L-L, L-N, L-G, N-G) V. Manufacturer Declared Surge Current Rating (Not verified by UL) per phase (XR modules; not available with L configuration) kA per phase (XR modules; available with L configuration) kA per phase (XR modules; not available with L configuration) kA per phase (XR modules; not available with L configuration) kA per phase (XR modules; available with L configuration) kA per phase (XW modules; available with L configuration) kA per phase (XW modules; not available with L configuration) kA per phase (XW modules; available with L configuration) kA per phase (XW modules; not available with L configuration) VI. Enclosure Ratings E1 Type 1/12/3R/04 4X Type 4X Non Metallic 4S Type 4X Stainless Steel UE Type 1 U10/E10 Size 16.9 by 10.0 by 5.7 in. with Display on Module P1 Type 1 Screw Cover Pull Box with Extended Display FM Type 1 Flush Mount VII. Options VIII. Type Blank Dry Contacts (Two sets Normally Open, Common, Normally Closed) X Surge Counter Y External Surge Counter Signal Z Combines options X & Y E Extended Display (remotely mounted) D Internal Rotary Disconnect - Bussmmann (UL98) T - Internal Rotary Disconnect - Bussmmann (UL98) with thru door handle; this option only available with Type 1, 12, and 3R Enclosures K Internal Rotary Disconnect - Katko (UL508) S - Internal Rotary Disconnect - Katko (UL508) with thru door handle L Deletes L-N protection (not available with G option) G Deletes L-G protection (not available with L option) N Deletes N-G protection F Extended range capacitor(only available with 31, 40, 45, 50kA) J Deletes capacitor P Any alphanumeric character not used above which indicate marketing text changes to any non-ul marking labels. Blank Type 1 SPD (USL covered only) 2 Type 2 SPD (USL and CNL covered)

31 File E Vol. 1 Sec. 1 Page 4 Issued: and Report ELECTRICAL AND VOLTAGE PROTECTION RATINGS: [7 mode, no disconnect, XR modules] Intended Rated MCOV Freq VPR In SCCR End-Use Cat. No. Voltage Phase Mode (V (Hz) (Vpk) (ka) (ka) SPD (V ac) ac) Type L-N TE01XAS## L-G / S 20 ST01XAS## N-G L-L TE15XAS## ST15XAS## 254/127 TE18XAS## ST18XAS## 480/ TE02XAS## ST02XAS## 208/ TE21XAS## ST21XAS## TE03XAS## ST03XAS## 60 S S Y 220/ Y 240/ H TE04XAS## ST04XAS## 480/ TE41XAS## ST41XAS## TE42XAS## ST42XAS## TE43XAS## ST43XAS## Y 520/ Y 415/ Y 400/ Y ## - May be replaced by 10, 15, 20, 25 or Not available with option L. - Not available with option G. - Not available with option N. L-N L-G N-G L-L L-N L-G N-G L-L L-N L-G N-G L-L L-N L-G N-G L-L L-N HL-N L-G HL-G N-G L-L HL-L L-N L-G N-G L-L L-N L-G N-G L-L L-N L-G N-G L-L L-N L-G N-G L-L

32 File E Vol. 1 Sec. 1 Page 19 Issued: and Report ELECTRICAL AND VOLTAGE PROTECTION RATINGS: (CONT D) [7 mode, no disconnect, XW modules] Intended Rated MCOV Freq VPR In SCCR End-Use Cat. No. Voltage Phase Mode (V (Hz) (Vpk) (ka) (ka) SPD (V ac) ac) Type L-N TE01XAS## L-G / S 20 ST01XAS## N-G L-L TE15XAS## ST15XAS## 254/127 TE18XAS## ST18XAS## 480/ TE02XAS## ST02XAS## 208/ TE21XAS## ST21XAS## TE03XAS## ST03XAS## 60 S S Y 220/ Y 240/ H TE04XAS## ST04XAS## 480/ TE41XAS## ST41XAS## TE42XAS## ST42XAS## TE43XAS## ST43XAS## Y 520/ Y 415/ Y 400/ Y ## - May be replaced by 31, 40, 45 or Not available with option L. - Not available with option G. - Not available with option N. L-N L-G N-G L-L L-N L-G N-G L-L L-N L-G N-G L-L L-N L-G N-G L-L L-N HL-N L-G HL-G N-G L-L HL-L L-N L-G N-G L-L L-N L-G N-G L-L L-N L-G N-G L-L L-N L-G N-G L-L

33 File E Vol. 1 Sec. 1 Page 34 Issued: and Report Additional Details Regarding Electrical Ratings: PHASE: Y Wye, H Hi-Leg Delta, D Delta, S Split AMPERAGE: NA Not Applicable for One Port SPDs not intended to carry load current. Mode(s) Refers to the pair of electrical connections where the VPR applies. The term "ALL" indicates that the VPR applies to all combinations of pairs of electrical connections. In: Nominal Discharge Current Rating in amps or ka - for Type 1 and 2 SPDs. NA Not Applicable, Optional for Type 3 SPDs. Voltage Protection Rating (VPR) A rating (VPR) has been assigned to each mode of protection. The value of the VPR is determined as the nearest highest value taken from Table 63.1 in UL 1449 to the measured limiting voltage determined during the transient-voltage surge suppression test using the combination wave generator at a setting of 6 kv, 3 ka. MCOV: Maximum Continuous Operating Voltage Rating in volts - for Type 1 and 2 SPDs. SCCR: Short-Circuit Current Rating in amps or ka - for Type 1 and 2 SPDs. TECHNICAL CONSIDERATIONS (NOT FOR FIELD REPRESENTATIVE S USE): These surge protective devices have been investigated with respect to electrical, fire and shock hazards only. These surge protective devices been tested to verify that transient voltage surges are limited to maximum amplitudes specified by the manufacturer when subjected to a 1.2 by 50 s, 6 kv peak and an 8.0 by 20 s, 3 ka surge, and that they can withstand 15 impulses at 20 ka surge current and continue normal operation. These devices have been tested to withstand 200 ka or 100 ka (per Ratings Tables) of available RMS fault current. Type 1 SPD Permanently connected SPDs intended for installation between the secondary of the service transformer and the line side of the service equipment overcurrent device, as well as the load side, including watt-hour meter socket enclosures and intended to be installed without an external overcurrent protective device. Type 2 SPD Permanently connected SPDs intended for installation on the load side of the service equipment overcurrent device, including SPDs located at the branch panel.

34 10 YEAR LIMITED WARRANTY Advanced Protection Technologies, Inc. warrants panel protection products against defective workmanship and materials for 10 years. Liability is limited to the replacement of the defective product. A Return Authorization (RA#) must be given by the company prior to the return of any product. Returned products must be sent to the factory with transportation charges prepaid. In addition, the company also warrants unlimited replacements of modular and component parts within the warranty period previously described. The company specifically disclaims all other warranties, expressed or implied. Additionally, the company will not be responsible for incidental or consequential damages resulting from any defect in any product or component thereof. Advanced Protection Technologies, Inc. Clearwater, Florida Nov 10. RevB