POG 10 + DSL. Features
|
|
- Archibald Bradford
- 5 years ago
- Views:
Transcription
1 Features Freely programmable on and off switching speed Programming via included software (RS485 interface) TTL or HTL, EURO-flange and/or housing foot 3 / solid shaft ø11 mm DSL.R: 3 outputs speed controlled (independent transistor outputs) DSL.E: 2 outputs speed controlled and 1 control output Technical data - electrical ratings Consumption w/o load Sensing method.e Voltage supply.r Voltage supply 200 m Optical VDC VDC Technical data - electrical ratings (encoder) Pulses per revolution Phase shift 90 ±20 Scan ratio % Reference signal Zero pulse, width 90 Output frequency 120 khz,, + inverted Output stages HTL TTL/RS422 Technical data - electrical ratings (speed switches) Interface Switching accuracy Switching delay time.e Switching outputs Output switching capacity.r Switching outputs Output switching capacity RS485 ±2 % (or Digit) 40 ms 2 outputs, speed control 1 control output VC/VDC; m 3 outputs, speed control 12 VDC; 40 m 1 Optional Relay module DS 93 R (DSL.R version only) Technical data - mechanical design Size (flange) Shaft type dmitted shaft load Flange ø115 mm Protection DIN EN IP 66 ø11 mm solid shaft 300 N axial 450 N radial Housing foot 3 Speed (n) 6000 rpm Range of switching speed Pulses = 512: (ns) ± rpm Pulses = 1024: ± rpm Pulses = 2048: ± rpm Pulses = 2500: ± rpm Operating torque 2 Ncm Rotor moment of inertia 290 gcm² Materials Housing: aluminium Shaft: stainless steel Operating temperature C Resistance IEC Vibration 20 g, Hz IEC Shock 200 g, 6 ms Corrosion protection IEC Salt mist Complies to ISO :1998 Protective paint systems (C4) Explosion protection II 3 G Ex n IIC T4 Gc (gas) II 3 D Ex tc IIIC T135 C Dc (dust) Connection Terminal box Weight approx. 3.3 kg Interference immunity EN Emitted interference EN pproval CE
2 Part number Encoder with digital speed switch POG10 DN + DSL.E Encoder with digital speed switch POG10 DN + DSL.R Mounting type 3 Housing foot 3/ Housing foot + Mounting type 3 Housing foot 3/ Housing foot + I R Incremental output Output circuit HTL with inverted signals Output circuit TTL with inverted signals I R Incremental output Output circuit HTL with inverted signals Output circuit TTL with inverted signals Pulse number - see table DN,, Pulse number - see table DN,, Pulse number ccessories dapter US RS485 Connectors and cables HEK 8 Sensor cable for encoders Mounting accessories K 35 Spring washer coupling for solid shaft ø mm K 50 Spring washer coupling for solid shaft ø mm K 60 Spring washer coupling for solid shaft ø mm Diagnostic accessories nalyzer for encoders HENQ 1100 Relay module for.r Relay modul DS 93 R 2
3 t positive rotating direction Terminal assignment View - Connecting terminal in terminal box Zero pulse Zero pulse 90 (GND) +U Terminal significance Speed switch version DSL.R R1* Transistor switching output 1, R2* Transistor switching output 2, R3* Transistor switching output 3, GND* Ground connection RS 485 Interface for PC or Laptop (adapter required). Programming of the DSL via the included software. * Connection to relay module, for example DS 93 R (accessory) Speed switch version DSL.E R1 (+) Electronic relay output 1, V C/DC R2 (+) Electronic relay output 2, V C/DC C1 (+) Electronic relay output as a control output, m RS 485 Interface for PC or Laptop (adapter required). Programming of the DSL via the included software. View - Connecting terminal speed switch Version DSL.R R1 R2 R3 GND RS 485 View - Connecting terminal speed switch Version DSL.E R1 R2 C1 RS 485 3
4 lock circuit diagram Version with DSL.E C VDC Control C1- R1- R1- Encoder DSL.E R2- R2-, RS485 (PC/Laptop) Version with DSL.R VDC High = 12 V Low = 0 V R1 12 VDC (High) Switching characteristics Encoder DSL.R R2 R3, RS485 (PC/Laptop) R1, R2, R3 (Low) -n +n -ns (off) -ns (on) 0 +ns (on) +ns (off) n = speed ns (on) = adjusted switching on speed ns (off) = adjusted switching off speed 4
5 Dimensions with with housing foot 3 with and housing foot 3 5
Speed switches Programmable, digital speed switch With incremental encoder POG 10
Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) EURO-flange B10 / shaft ø11 mm DSL.R: 3 outputs speed
More informationSpeed switches Programmable, digital speed switch With incremental encoder HOG 10
Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) Combination with end shaft ø16 mm DSL.R: 3 outputs speed
More informationAMG 11. Features. Optional. Additional incremental output (TTL / HTL) AMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit EURO-flange B10 / solid shaft ø11 mm Multiturn sensing with microgen
More informationIncremental encoders Solid shaft with EURO flange B pulses per revolution
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Features Size ø58 mm Precise optical sensing Output signal level TTL or HTL EURO flange B Connection axial,
More informationIncremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
More informationHMG 11. Features. Optional Additional incremental output (TTL / HTL) HMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn / SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit Blind or through hollow shaft or cone shaft ø16-0 mm Multiturn sensing
More informationAbsolute encoders - SSI
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics Counting direction input Available
More informationEncoders without bearings - incremental Magnetic sensing, through hollow shaft max. ø180 mm pulses or 128 sinewave cycles per turn
Features Sinewave or square-wave signals Robust and wearless High protection through fully encapsulated electronics Large tolerances: axial ±3 mm, radial max. 2.2 mm Very compact dimensions Simple mounting,
More informationAbsolute encoders - modular bus covers Solid shaft with clamping or synchro flange Optical single and multiturn encoders 13 bit ST / 16 bit MT
Features Encoder single- or multiturn / bus cover Optical sensing method Resolution: singleturn 13 bit, multiturn 16 bit Clamping or synchro flange CANopen /DeviceNet/EtherCAT/EtherNet-IP SAEJ1939/PROFINET/POWERLINK/Profibus/SSI
More informationSERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
More informationDelivery. Connection. C. AA+BB Helicoidal cable 2. Radial M12 8p CCW. 3. Radial M23 12p CCW
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
More informationMHAP HDmag. Features
Features MHP 200 - Version for axial screw mounting bsolute encoder with magnetic sensing and without bearings with integrated FPG signal processing bsolute resolution max. 17 bit singleturn dditional
More informationAbsolute encoders - bus interfaces Solid shaft with clamping or synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.15 Additional incremental signals High protection up to IP 67 High resistance to shock and vibrations
More informationAbsolute encoders - bus interfaces Solid shaft with clamping or synchro flange Optical multiturn encoders 13 bit ST / 12 bit MT, RS485
Optical multiturn encoders 1 bit ST / 12 bit MT, RS485 Features Encoder multiturn / RS485 Optical sensing method Resolution: singleturn 1 bit, multiturn 12 bit Clamping or synchro flange Fieldbus protocol
More informationAbsolute encoders - bus interfaces Solid shaft with synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
EAM60 - solid shaft CANopen - MAGRES Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up to IP 67 High
More informationAbsolute encoders - bus interfaces
Features Absolute encoder multiturn Optical sensing method Max. resolution: singleturn 18 bit, multiturn 16 bit LED status indicator PROFINET IO Maximum resistant against magnetic fields Optional EAL580
More informationRoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
More informationRotary Position Technology Incremental Encoders
-40 to 85 C IP Bearing-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit protected Reverse polarity protection Optical
More informationAbsolute Encoders Multiturn
The multiturn encoders 6 and 8, with interface and combined optical and magnetic sensor technology, offer a maximum resolution of 5 bits. These encoders are programmable via the Ezturn software. The hollow
More informationRotary Position Technology Incremental Encoders
-40 to 85 C IP Safety-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Optical sensor
More informationIncremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
More informationRotary Measuring Technology Absolute encoders, Singleturn, Profibus-DP
Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable Increased ability
More informationAbsolute encoders - bus interfaces Encoder kit Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Magnetic single- or multiturn encoders 1 bit ST / 18 bit MT Features single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up
More informationRotary Measuring Technology Absolute encoders, Multiturn, DeviceNet
High IP High shaft load capacity Shock/vibration resistant Short-circuit proof Reverse polarity protection Compact and Rugged: Minimal installation depth High shock and vibration values Very compact (only
More informationMultiturn absolute encoder
Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Galvanically isolated CAN interface DSP 406, CLASS 1 and 2 Servo or clamping flange 2 limit switches Description In addition to
More informationMultiturn absolute encoder
Release date: 207-0-2 :0 Date of issue: 207-0-2 t79_eng.xml Model Number Features Industrial standard housing Ø58 mm PROFINET IRT 0 Bit multiturn Servo or clamping flange Network loop through by means
More informationRotary Measuring Technology Absolute encoders, Multiturn, Profibus-DP
Mechanical drive Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Very small housing Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Description This absolute rotary encoder provides
More informationEAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Highly shock / vibration and soiling resistant Sturdy construction
More informationRotary Measuring Technology
Multiturn Type 8 Profibus-DP Very compact (only 87.8 mm installation depth); Ideal for dynamic applications thanks to its non-contact multiturn stage Solid shaft or blind hollow shaft Long service life
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 130 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft 0 Bit multiturn Free of wear magnetic sampling High resolution and accuracy Mechanical compatibility with all major encoders with fieldbus interface Status LEDs Description
More informationAbsolute Encoders Multiturn
The Sendix multiturn encoders 5868 and 5888 with CANopen or CANlift interface and optical sensor technology are the right encoders for all CANopen or CANlift applications. With a maximum resolution of
More informationRotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
More informationInclination sensors 2-dimensional, measuring range up to ±90
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
More informationPRELIMINARY EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER ORDERING CODE BIT PARALLEL
EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
More informationAbsolute encoders - modular bus covers
BMMH 58 flexible with blind hollow shaft Features Encoder single- or multiturn / bus cover Robust magnetic sensing Resolution: singleturn bit, multiturn 8 bit Modular fieldbus interfaces CANopen /DeviceNet/EtherCAT/EtherNet-IP
More informationABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit =,554,42
More informationRotary Measurement Technology Absolute Encoders, Singleturn
-20 to 85 C High rotational speed Temperature Shock/ vibration resistant Short-circuit proof Reverse polarity protection Rugged Highest shock resistance on the market: ( 200 g (2,500 m/s 2 )), 6 ms acc.
More informationRotary Measuring Technology Absolute encoders, Multiturn, optional with incremental track
Electronic multiturn gear with intelligent sensing technology (IST) Integrative Technology Max. 4 programmable outputs* for the SSI version Programmable parameters include*: code type, resolution per revolution,
More informationTECHNICAL DATASHEET Incremental Encoder RI 58-F
Incremental hollow shaft encoder Up to 10 000 ppr Through hollow shaft and hubshaft up to 12 mm (14 mm optional) Optimized stator coupling Applications: Feedback for asynchronous motors, industrial applications
More informationEXAG - Dual Output Profibus / Incremental
Explosion Proof Profibus / Incremental EXAG Dual Output Profibus / Incremental Electrical Specifications General Ex d Proof Shaft Encoder Shaft: Profibus DPV2 Functionality Absolute Resolution up to 30
More informationSSI GENERAL INFORMATION ABSOLUT AND PROGRAMMABLE ABSOLUT SSI ENCODERS
GENERAL INFORMA SSI ABSOLUT AND PROGRAMMABLE ABSOLUT SSI ENCODERS In many cases, the data transmitted from one system to another are subjected to magnetic fields and noise, by using standard interfaces,
More informationAbsolute Encoders Multiturn
The multiturn encoders 5868 and 5888 with interface and optical sensor technology are ideal for use in all applications with a interface. The encoder supports the isochronous (IRT) mode and is therefore
More informationEncoders Absolute Singleturn Encoder Types A58CS8
Types A58CS8 Sturdy design with hardened bearings High rotation speed -40...+80 C/-40...+76 F operating temperature range High shock and vibration resistance Magnetic field proof also available as explosion
More informationRotary Measurement Technology Absolute Encoders, Singleturn
-40 to 80 C IP Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
More informationRoHS. Shock / vibration resistant. Short circuit proof. Flexible. . XXXX e. . XXXX e
The Sendix multiturn encoders 5862 and 5882, with SSI or RS485 interface and combined optical and magnetic sensor technology, offer a maximum resolution of 25 bits. These encoders are programmable via
More informationInclination sensors 1-dimensional, measuring range
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The contactless sensor utilizes the orientation of a magnetic field for the determination of the measurement angle. The
More informationType SCA94DD. Wind Power / Direct Drive
Wind Power / Direct Drive Type SCA94DD Specifically made for measurement of Speed and Position on slow revolving Direct Drive Generators on Wind Turbines High Resolution of Speed and Position High Update
More informationDATA SHEET ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and Robust Industrial Model - Synchronous Serial Interface SSI (RS-422 / TTL) - Optional Incremental Output RS-422 or Push-Pull (TTL, HTL compatible) - Standard 59 mm Housing -
More informationMHAD 50 - HDmag. Features
MHAD 50 with cable Features Absolute encoder with magnetic sensing and without bearings Absolute resolution max. 16 bit singleturn Additional incremental signals Robust and wearless Protection IP 67 Large
More informationComplete Solutions from Specialists. Rotary encoders for geared motors: 5820 M-Line
Rotary encoders for geared motors: 5820 M-Line Complete Solutions from Specialists Stable: Even under the toughest of uses. Versatile mounting options with individual torque arm solutions. Economic: Can
More informationType EXAG - Profibus. Explosion Proof / Absolute. Ex d - Proof Hollow Shaft Encoder - Ø 78 mm
Explosion Proof / Absolute Type EXAG - Profibus Ex d - Proof Encoder - Ø 78 mm Hollow Bore: Ø 14 mm, Ø 16 mm and Ø 1 inch Profibus DPV2 Functionality Resolution up to 30 bits Removable End Cap for on-site
More informationRotary Position Technology Absolute Encoders, Singleturn
-20 to 85 C High rotational speed Temperature Shock/vibration resistant Short-circuit proof Reverse polarity protection Optical sensor Magnetic field proof Rugged Highest shock resistance on the market:
More informationShaft: Ø 10 mm or Ø 12 mm. Material: Weight: Bearing Life: Shaft Speed: Shaft Loads: Shock: Vibration: Bump:
Explosion Proof / Absolute Type EXAG - SSI Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm or Ø 12 mm Synchronous Serial Interface (SSI) (RS422/TTL) Resolution up to 30 bits Removable End Cap for on-site
More informationRotary Measuring Technology
--20 40... 60 + C 85 Temperature Shock/vibration resistant Short-circuit proof Reverse polarity protection One type for every situation: Version "flameproof-enclosure": approval zones 1, 2 and 21, 22 Zones
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - Profibus
Diagnostic LED Cable or M12 connector Output of speed, acceleration Programmable: Resolution, Preset, Direction, Operation time Option: Display "tico" Address via interface parameterizable (optional) hubshaft
More informationThe pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document.
The pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document. Rotary Encoder Solutions Limited Dutton Road Redwither Business
More informationOptical Absolute Encoder Singleturn or Multiturn with hollow shaft Profibus-DP, CAN, CANopen, DeviceNet GX, G1, G2AMH / GX, G1, G2MMH
TM Optical Absolute Encoder Singleturn or Multiturn with hollow shaft,, open, GX, G1, G2AMH / GX, G1, G2MMH Features Interfaces:,, open, Resolution: 13 bit singleturn, 29 bit multiturn Parameterizable
More informationEncoders IE Series. Magnetic Encoders 6,1 12, Features: 64 to 512 Lines per revolution 2 Channels Digital output
Encoders Magnetic Encoders Features: 64 to 52 Lines per revolution 2 Channels Digital output Series IE2 52 Lines per revolution Signal output, square wave Supply voltage Current consumption, typical (V
More informationMaterial: Weight: Shaft Loads: Cable: Connector:
Absolute Encoder Type 2RMHF-SSI Absolute Encoder - Ø 24 mm Blind Hollow Shaft - Ø 3 mm to Ø 1/4 inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting
More informationABSOLUTE ROTARY ENCODER ETHERNET/IP
Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824
More informationEncoder WDG 30A.
Encoder WDG 30A www.wachendorffautomation.com/wdg30a Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationType EXME - DeviceNet
Explosion Proof - Mining / Absolute Type EXME - DeviceNet Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm DeviceNet communication protocol Resolution up to 30 bits Removable End Cap for on-site modifications
More informationRotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
More informationABSOLUTE ROTARY ENCODER MIDI CANOPEN
Main Features - Compact and heavy-duty industrial design - Interface: CANopen / CAN - Housing: 58 mm Ø - Solid / hollow shaft: 6 or 10 mm Ø / 15 mm Ø - Max. 6556 steps per revolution (16 Bit) - Code: Binary
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - SUCOnet
Compact design SUCOnet or Hengstler-G1-Protocol Parameterizable: preset, direction, scaling factor, resolution PC communication via RS 485 with Hengstler-G1-Protocol Clamping flange TECHNICAL DATA mechanical
More informationRotary Measuring Technology Absolute singleturn encoder shaft version
Highest shock resistance on the market ( 2500 m/s 2, 6 ms acc. to DIN IEC 68-2-27) SSI, parallel or current (4... 20 ma) interface Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 65 Various
More informationShaft Speed: Shock: Vibration: Bump:
Explosion Proof / Absolute Type EXAG - CANopen Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm CANopen communication profile according to DS 301; Programmable according to Class 2 Resolution up to
More informationENCODER. Profibus Multiturn. Series , Key-Features:
ENCODER Profibus Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Technical Data Profibus Interface Connection Technical Drawing......3...4...4...5 - Solid shaft: maximum diameter 0 mm
More informationENC-CKP58-H-PROG-ZCW-4-06-A-L1
IP58/IP58S/CKP58 Programmable Incremental Encoders FEATURES Programmable Incremental Encoder Resolution from 1 to 65536 PPR Voltage 5 VDC or 10-30 VDC Push-Pull and Line Driver Compatible Output IP 65
More informationStandard PROFINET IO. RoHS. High shaft load capacity. High protection level. Flexible
The encoders Sendix 5868 and 5888 with PROFINET interface and optical sensor technology are ideal for use in all applications with PROFINET technology. The encoder supports the isochronous (IRT) mode and
More informationAbsolute encoder TBD/TRD with PROFIBUS-DP interface
with PROFIBUS-DP interface Document no.: TRD 11868 LE Date: 15.02.2016 Singleturn and multiturn versions Contactless, wear-free sensor system according to the Hall principle High vibration and shock resistance
More informationEncoder WDG 40A.
Encoder WDG 0 www.wachendorffautomation.com/wdg0a Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationEncoder WDG 40A.
Encoder WDG 0 www.wachendorffautomation.com/wdg0a Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationShaft Speed: Shock: Vibration: Bump:
Explosion Proof / Absolute Type EXAG - Profibus Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm Profibus DPV2 Functionality Resolution up to 30 bits Removable End Cap for on-site modifications ATEX,
More informationNOVOTURN Multiturn-Sensor non-contacting. Series RSM2800 digital SSI, SPI
NOVOTURN Multiturn-Sensor non-contacting Series RSM2800 digital SSI, SPI Special features True Power On System: counts turns even when not powered. Patented non-volatile technology does not require gears
More informationABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K3 (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit = 33,554,432
More informationEncoder WDG 40E.
Encoder WDG 0E www.wachendorffautomation.com/wdg0e Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationABSOLUTE ROTARY ENCODER SINGLE-TURN BIT PARALLEL
ABSOUTE ROTARY ENCODER Main Features - Compact and Heavy-Duty Industrial Model - Interface: Bit-parallel, Push Pull Short Circuit Proof - Housing: 58 mm - Shaft: 6 or 10 mm, Hub- 15 mm - Resolution: max.
More informationEncoder WDG 58A.
Encoder WDG www.wachendorffautomation.com/wdga Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions Maximum
More informationMaterial: Weight: Bearing Life: Shaft Speed: Shaft Loads: Shock: Vibration: Bump:
Encoder Description EXAG SSI / Hollow Shaft EXAG SSI Hollow Shaft Encoder - Ø 78 mm Hollow Bore: Ø 14 mm and Ø 16 mm Synchronous Serial Interface (SSI) (RS422/TTL) Resolution up to 30 bits for on-site
More informationARS - ARC ROTARY ENCODERS. Series. Incremental INDUSTRIAL ROTARY ENCODERS UP TO PULSE VARIOS RESOLUTIONS VARIOUS SOLID SHAFT AND BODY DIAMETERS
ARS - ARC Series Incremental ROTARY ENCODERS INDUSTRIAL ROTARY ENCODERS UP TO 20.000 PULSE VARIOS RESOLUTIONS VARIOUS SOLID SHAFT AND BODY DIAMETERS CUSTOM DESIGNS Shaft Models Hollow Shaft Models Tel:
More informationShaft: Ø 10 mm and ø 12 mm. Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Shaft Loads: Shock: Vibration: Bump:
Explosion Proof / Absolute Type EXAG - Ethernet Non removable end cap delivered with cable Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm and ø 12 mm Ethernet - TCP/IP and MODBUS TCP communication
More informationAbsolute multiturn encoder TRK/S3 with EtherCAT FSoE interface
Absolute multiturn encoder TRK/S3 with EtherCAT FSoE interface Document no.: TRK 13348 BE Date: 13.11.2015 Contactless, wear-free sensor system according to the Hall principle High vibration and shock
More informationABSOLUTE ROTARY ENCODER INTERBUS LOOP2
Main Features - Compact and heavy duty industrial model - Interface: INTERBUS Loop2 (Local-Bus) - ENCOM-Profile: K (programmable) - Housing: 58 mm - Resolution: max. 25 Bit =,554,42 steps over 4,096 revolutions
More informationENC-IQ58S-H-PROG-ZCW-4-06-A-L1
IQ58/ IQ58S/ CKQ58 Hollow Shaft Magnetic Encoder Series FEATURES Programmable Incremental Encoder Resolution from 1 to 16384 PPR Selectable Index length 90 or 180 el. Push-Pull and Line Driver Compatible
More informationAbsolute encoders multiturn
PROFIBUS P The multiturn encoders Sendix 5868 and 5888 with Profibus interface and optical sensor technology are the ideal solution for all Profibus applications. With a maximum resolution of 8 bits these
More informationEncoder WDG 115T - Discontinued product
Encoder WDG T Discontinued product www.wachendorffautomation.com/wdgt Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
More informationILA1F572PB1A0 integrated drive ILA with servo motor V - CANopen - PCB connector
Characteristics integrated drive ILA with servo motor - 24..36 V - CANopen - PCB connector Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Network number
More informationMHK5 SERIES PROFINET ABSOLUTE MULTI -TURN ENCODER
MHK5 SERIES PROFINET ABSOLUTE MULTI -TURN ENCODER Features Robust and compact design Blind shaft version. 15mm standard ID with options down to 6mm ID Precision ball bearings with sealing flange High temperature
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft: 6 or 10 mm / 15 mm
More informationENCODER. CANopen Multiturn. Series , Key-Features:
ENCOER CANopen Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Solid Shaft... Order Code Blind Hollow Shaft... Technical ata... CANopen Interface...5 Connection...6 Technical drawing...7
More informationPROFIsafe over PROFINET
PROFIsafe over PROFINET Specifications Contactless, wear-free sensor system according to the Hall principle High vibration and shock resistance thanks to the robust mechanical design SIL2 and Performance
More informationEncoder WDG 115T.
Encoder WDG T www.wachendorffautomation.com/wdgt Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationTECHNICAL DATASHEET Absolute Motorfeedback Series AD 34
For brushless servo motors Light duty encoder Unique mounting concept: Save installation time and cost Mounting Depth: 25 mm (ST), 34 mm (MT) Up to 9 Bit ST - resolution + 2 Bit MT - resolution +20 C operating
More informationAbsolute Rotary Encoder EXAG Explosion Proof. Profibus-DP
PROCESS FIELD BUS Main Features - Approval II 2 G/D EEx d II C T6 - Heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: - DPV2-Functionality - max. 65536 steps per revolution
More informationThe pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document.
The pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document. Rotary Encoder Solutions Limited Dutton Road Redwither Business
More informationDATA SHEET ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and Robust Industrial Model - Synchronous Serial Interface SSI (RS-422 / TTL) - Optional Incremental Output RS-422 or Push-Pull (TTL, HTL compatible) - Standard 59 mm Housing -
More information