ICX-CMOS-E-2006 Electrical / I&C Engineer PERSONAL DATA EDUCATION LANGUAGES COMPUTER SKILLS TRAINING COURSES AND CERTIFICATIONS

Transcription

1 ICX-CMOS-E-2006 Electrical / I&C Engineer Holds a B. Sc. in Electronics & Electrical Communications Engineering and has over 9 years hands-on experience working in I&C field. Has extensive experience on control system DCS ALSPA 320 and Mark VI control system. PERSONAL DATA Nationality : Egyptian Birth Date : 08/05/1984 Gender : Male Marital Status : Married Residence : Helwan, Cairo EDUCATION : B. Sc. in Electronics & Electrical Communications Engineering, Cairo University, 2006 LANGUAGES Arabic English : Native Language : Very Good COMPUTER SKILLS : Windows, MS Office, Internet TRAINING COURSES AND CERTIFICATIONS : Basic course of the Operation and Maintenance of Steam Power Stations in El-Kureimat Training Center (from Feb. till Jun. 2007). : MS9001FA gas turbine operations training by GE for 6 weeks. : MK VI training by GE for one week. : Maintenance of ALSPA P320 ES CELL C30 MODEL for one month. : Training at ALSTOM Company in France for 3 months (from Oct till Feb. 2009) in ALSPA P320-ES CELL C30 MODEL OF CENTRALOG STATIONS: System layout (DETAILED ARCHTECTURE). CONTROBLOCK ES type, how to: - Do maintenance for all hardware equipment (Controller C80-75, controller CE2000 and cubicle structures). - Troubleshooting. CENTRALOG, how to: - Control and monitor a power plant. Page 1 of 5 Updated: Dec. 2016

2 - Store and consult logs. - Store, retrieve and consult historical data. - Install, start and stop the centralog part of the system. - Download a new database version. - Download a new MIMIC version. CONTROCAD SOFTWARE, how to: - Generate or modify the hardware architecture of the project. - Generate or modify the control function application. - Generate or modify the control and supervision HMI. - Generate or modify the project documentation. - Backup and restore all or part of the system. - Use the tool as navigator to find variables. - Debug the control function diagram. - Use the component of business library. - Produce a complete control & supervision project on the basis of a Customer specification. CHRONOLOGICAL EXPERIENCE RECORD Dates Employer Project Job title Job Description : From Jul till now : PSP ELSWEDY : Beni Suef Power Plant 4800MW Combined Cycle Project (partner with Siemens) : Commissioning & Testing Engineer Electrical and I&C for GIS, MV and LV : Responsible for all Tests in main & auxiliary Transformer (Megger, Turns Ratio, Tan-Delta for winding and bushing, CT ratio and Vector Group). All tests related to GIS 500KV (loop check, CB s and DS Timing, Contact Resistance, control and interlock check, Function Check, Sensitivity for PD High Voltage and Stability Test). Relay setting test and function test (Siemens over current, distance, auto reclosure, breaker failure and cable differential). AC Panels Energizing / function test. Battery chargers Energizing / function test. DC panels Energizing / function test. CT and VT loop secondary Injection Test. CT and VT loop primary Injection Test (ratio, polarity and excitation). Battery charging and discharging to achieve the capacities for batteries. Dates : From May 2016 till Jul Employer : Smart Power Company (Subcontractor from Siemens) Project : Siemens Adaptation Project for 132/66/11 substation Job title : Site Project Manager Job Description : Preparation of I/O lists (DI/DO/AI) for substations. Preparation of existing C&R Panel Drawing and interfacing with SCADA System Cable schedule, MFM schedule and Drawing verification in Control & Relay panels. Erection, Commissioning and Power-up of RTU Panel, Interface Panel (IDF), Intelligent Electronics devices and Multi Function Meters Panel Substations. On site Testing: Availing Shutdown for the SCADA Digital output, Digital Page 2 of 5 Updated: Dec. 2016

3 input, Analog input testing and C.T Connection, Coordinating with Maintenance team to troubleshoot the problems faced during testing. Dates : From Jan till May 2016 Project : SHARM EL-SHEIKH 6 x LM Hz SIMPLE CYCLE WITH THREE TRANSFORMERs (3 SWITHYARDs) Job title : Commissioning, Testing & Start-up Electrical Engineer Job Description : Loop check for all interconnections wiring between CB s Poles, switchgear and protection panel. Testing Differential and Distance protection relays (T60, D60) using ISA secondary injection. Perform tests on 220KV circuit breakers (contact resistance, timing and function test). Perform stability test and checking CT s and VT s polarity for power transformer. Access Differential and Distance protection relays using Unervista software. Perform transformer tests (mechanical and electrical). Loop check for all instrumentation related to Gas Turbine. Water treatment plant loop check, commissioning and start-up for all power and instrumentation equipment. Dates : From Jan till Jan Project : Sharm El-Sheikh 6x50MW Job Description : Design and Testing Engineer for Substation: - Excellent working with ELCAD software for drawing of high voltage substation from 11KV to 132KV. - Design, analyze and propose modification of Substation. - Reading electrical design specifications and technical drawings. - Preparation of Electrical Procedures for Installation, testing & commissioning of high voltage substation. - Preparing Cable schedule for substation equipment wiring and preparing all documents need for the project such as Terminal Diagram, parts list, circuit diagram etc. - Modify old substation to be connected with Dispatch center via SCADA system using ELCAD for drawing. - Attending meetings to solve any technical issues. - Estimation of materials required for Installation of Substation Equipments. - Transmission line testing. - Design and calculate relay setting for (transformer and line Differential protection, over current protection, over load and REF protection). Construction Engineer: - 220KV CB mechanism replacement. - Insulation resistance test for trip coil and close coil. Dates : From Jul till Jan Page 3 of 5 Updated: Dec. 2016

4 Job Description : I&C Maintenance Engineer for ALSPA P320 DCS (process, field equipment and engineering). Attend combustion inspection for Gas turbine GE Mark VI. Attend a major inspection for Gas turbine Siemens. Dates : From Jul till Jul Job title : I&C Commissioning & Maintenance Engineer Job Description : Loop check for all field instruments. Function checks for ALSPA P320 DCS control system for two HRSG. Follow up the interface (hardwired and soft link) between DCS and other systems (Gas turbine, steam turbine, auxiliaries of gas turbine and switchyard). Dates : From Oct till Jul Job title : I&C Construction Engineer Job Description : Responsible for "I&C drawings review" according to the contract specification requirements for two HRSG by CMI Company. UPPEC Representative, responsible for FAT (Factory Acceptance Test) for all termination cabinets of DCS and HRSG. Reviewing all spare parts related to HRSG & DCS. Follow up cable termination of the ALSTOM controller (ALSPA P320). Follow up cable termination of the auxiliaries marshalling cabinets and controller cabinets. Follow up cold loop checks of the HRSG instrumentation. Dates : From Mar till Oct Job title : I&C Commissioning Engineer Job Description : UPPEC Representative, responsible for commissioning of all I&C works in: Loop check for all field instruments. Function checks for MARK VI control system for two gas turbines (GE Frame 9FA). Siemens S7 400 PLC (for all auxiliaries of two gas turbines). Gas chromatograph for natural gas analysis. Follow up all construction issues. Dates : From Jun till Mar Job title : I&C Construction Engineer Page 4 of 5 Updated: Dec. 2016

5 Job Description : Responsible for "I&C drawings review" according to the contract specification for gas turbine and its axillaries (GE with control system MARV VI and TECHINT CIMIMONTUBI). Responsible for "I&C drawings review" according to the contract specification for HRSG and DCS (HRSG by CMI and DCS by ALSTOM with control system ALSPA P320). Responsible for "I&C drawings review" according to the contract specification for steam turbine (Alstom with control system ALSPA P320 TGC). Follow up cable termination of the GE Gas Turbine controller (MK VI). Follow up cable termination of the auxiliaries marshalling cabinets and controller cabinet (S7 400 Siemens PLC). Follow up cold loop checks of the Gas turbine instrumentation. Field of experience : My Job now with PSP ELSWEDY Electric in Beni Suef Power Plant 4800MW (Combined Cycle Project) as Electrical and I&C Engineer, commissioning and testing for GIS, MV and LV, this project is the largest one in Middle East. I worked in erection, tests and commissioning for Siemens adaptation projects in Upper Egypt for all 132/66/11KV substation as a Site Manager. My experience in Project in SHARM EL-SHEIKH 6 x LM Hz SIMPLE CYCLE as Electrical Construction, Commissioning and Testing Engineer, responsible for Switch Yard 1, 2 and 3 tests for protection relays (T60, D60) and commissioning, Commissioning and Testing of switchgear equipments i.e. CT (current transformer), PT (Potential Transformer), CB (GCB) etc., Commissioning and Testing of Power Transformers rated 120MVA, loop check for all instrumentation related to GT (Gas Turbine), loop check and start-up for water treatment plant. I have more than 9 years experience in Power Plant (750MW) including 2x250MW gas turbine GE 9FA and 250MW steam Turbine Alstom and Boiler HRSG as Instrumentation & Control Engineer. Extensive experience on control system DCS ALSPA 320 and Mark VI control system. I have a good knowledge of how DCS in construction phase and commissioning all interfaces with field instruments, control valves and switch gear and installation cards and testing all signal connected to the controller. Troubleshooting and maintenance by function logic test and calibration for measuring instruments for temperature, vibration, pressure, level, switches and flow. Help and support the operators to solve their problems to achieve better efficiency for the plant. Page 5 of 5 Updated: Dec. 2016