Linx Continuous Ink Jet Printers Parts List

Transcription

1 Linx Continuous Ink Jet Printers Parts List Parts Only Edition 11 June 2013

2 Parts List Using This Parts and Prices List The information in this Parts List is to provide a distributor of Linx products with sufficient information to identify and order spare parts for the Linx range of Continuous Ink Jet Printers. Products and component parts described in this document are subject to continuous development, and reviews will be made periodically in further issues and amendments. To assist in identifying the relevant part number, numbered illustrations are provided where possible. For further information or help with Linx spare parts please contact: Linx Printing Technologies Ltd Burrel Road St Ives Cambridgeshire PE27 3LA UK Tel: (0) Fax: (0) Linx will be pleased to receive any correspondence relating to this Parts List and the parts described herein. Disclaimer and Copyright Information of a technical nature and particulars of the spare parts and their use are given by Linx in good faith. At all times, Linx Continuous Ink Jet Printers must be operated with Linx-approved spares. Linx cannot accept liability for any loss or damage caused by the fitting or use of unauthorized spare parts. The Parts List is intended to assist the distributor to maintain Linx products, and every care has been taken to be precise and accurate. However, Linx shall not be liable for any loss or damage arising from the use of any information herein, errors or omissions, or any incorrect use of the spare parts and products whatsoever. Neither whole nor part of the information contained in this manual, nor the products described, may be adapted or reproduced in any material form without prior written consent of Linx Printing Technologies Ltd. This Edition published 11 June Linx Printing Technologies Ltd LINX is a registered trademark of Linx Printing Technologies Ltd. Unauthorized use of the LINX trademark is strictly forbidden. In addition to our standard terms and conditions, you should note the following: 1. Where prices are shown: Price D is the price charged by Linx to a Distributor. Any general or specific discounts to this price are not shown. Where shown, Price L is the recommended List Price (advisory end user price). Packaging of spare parts is included in the price. 2. All Distributor prices quoted are ex-works Linx factory, St Ives, UK. 3. Availability, as quoted in the price list, is defined here: Ex-stock: X Weeks: Enquire: Last Stock: Items will be available for despatch within 3 working days of receipt of order. Items will be available for despatch within X weeks of receipt of order. Please contact Linx Sales office for advice on availability terms. Stocks of these spare parts are limited; supply is subject to availability. Orders for large quantities of single items may be subject to scheduled deliveries. If this happens, the first part delivery of any order will be despatched according to the terms defined above. Parts Only Edition (ii) 11 June 2013

3 Section 13 - Printheads - Mk3B Micro and Macro 1 Macro R/A Printhead Micro R/A Printhead 2 Macro Printhead Micro Printhead 3 Section 13 - Printheads - Mk3B Micro and Macro 4 FA21011 PRINTHEAD ASSY MICRO MK3B 2M 1 EX-STOCK Positive air should not be fitted to printers configured with the Mk3B Macro printhead. FA21013 PRINTHEAD ASSY MICRO MK3B 2M R/A 1 EX-STOCK FA21012 PRINTHEAD ASSY MICRO MK3B 4M 1 EX-STOCK FA21014 PRINTHEAD ASSY MICRO MK3B 4M R/A 1 EX-STOCK Parts Only Edition June 2013

4 Section 13 - Printheads - Mk3B Micro and Macro FA23011 PRINTHEAD ASSY MACRO MK3B 2M 1 EX-STOCK FA23012 PRINTHEAD ASSY MACRO MK3B 2M R/A 1 EX-STOCK 1 FA20009 PRINTHEAD THUMB SCREW - PACK 5 EX-STOCK 2 FA72040 PRINTHEAD COVER TUBE ASSY 1 EX-STOCK 3 FA72092 P/H COVER TUBE ASSY MILD STEEL 1 EX-STOCK For a magnetic conveyor in order to shield the printhead Hall effect switch. 4 FA74129 PRINTHEAD SPLASH COVER - PACK 20 EX-STOCK To protect printheads against water ingress during wash down. Parts Only Edition June 2013

5 Section 13 - Printheads - Mk3B Micro and Macro Parts Section 13 - Printheads - Mk3B Micro and Macro Parts 1 FA73194 GUN COVER MICRO 1 EX-STOCK 2 FA73194 GUN COVER MICRO 1 EX-STOCK FA20011 NOZZLE O - RING - PACK 10 EX-STOCK Suitable for all printheads manufactured from August FA74046 NOZZLE CLEANING SERVICE ACCESSORY 1 EX-STOCK Refer to Manual for the Nozzle Cleaning Procedure. Parts Only Edition June

6 Section 13 - Printheads - Mk3B Micro and Macro Parts FA73051 SCREW M2 X 6 PAN POZ SS - PACK 100 EX-STOCK Nozzle screw. FA73052 WASHER SHAKEPROOF M2 SS - PACK 100 EX-STOCK Washer for nozzle & gun cover. FA73053 NUT FULL HEX M2 SS - PACK 100 EX-STOCK Gun cover nut. 3 FA73002 COVER TUBE MAGNET ASSY 1 EX-STOCK For Mk3B & Mk5 printheads only. 4 FA20006 BLIND GROMMET - PACK 10 EX-STOCK Fitted around printhead fluid pipes & around electrical wiring on TUV 6000 & CE FA CONN D-TYPE SHELL 15-WAY BLACK Obsolete FA D CONN FITTING TOOL Obsolete 6 FA20007 HEATSHRINK BOOT (MINI COAX) - PACK 3 EX-STOCK To fit mini coax plugs. 7 FA74028 MINI COAX CONN - PACK 5 EX-STOCK Part of cableform AS FA20008 INSULATED RECEPTACLE RED - PACK 20 EX-STOCK 9 FA WAY FLUID CONNECTOR 15 MICRON 1 EX-STOCK 10 FA74135 M3 X 28 CSK POZ SS SCREW - PACK 10 EX-STOCK 11 FA74136 GASKET: FLUID CONNECTOR 3-WAY - PACK 10 EX-STOCK 12 FA WAY CONNECTOR REPLACEMENT FILTER 15/25 MICRON 1 EX-STOCK For use with FA20110 connector. Includes insert/extract tool & gasket. 13 FA20005 RESTRICTOR TUBE & EAR CLIP - PACK Obsolete Micro & Midi printheads only. FA SOLVENT RESISTANT CLEANING BRUSH 1 EX-STOCK 14 FA65006 TOOLS 1/8 UNION FITTING 1 4 WEEKS Only for printheads fitted with 1/8 union fitting connectors. FA65007 BLANKING SET 1/8 UNION FITTING 3 4 WEEKS Only for printheads fitted with 1/8 union fitting connectors. FA65008 FERRULES 1/8 UNION FITTING - PACK 10 4 WEEKS Only for printheads fitted with 1/8 union fitting connectors. FA73048 PROTECTION CAP SILICONE - PACK Obsolete Parts Only Edition June 2013

7 Section 13 - Printheads - Mk5 Midi Section 13 - Printheads - Mk5 Midi FA22019 PRINTHEAD ASSY MIDI MK5 2M 1 EX-STOCK Printheads calibrated for Food Grade Inks add œ40 premium to the prices shown. FA22021 PRINTHEAD ASSY MIDI MK5 2M R/A 1 EX-STOCK FA22020 PRINTHEAD ASSY MIDI MK5 4M 1 EX-STOCK FA22022 PRINTHEAD ASSY MIDI MK5 4M R/A 1 EX-STOCK Parts Only Edition June 2013

8 Section 13 - Printheads - Mk5 Midi FA24019 PRINTHEAD ASSY 70 MICRON MK5 2M 1 EX-STOCK A table giving the offset codes is supplied with each printhead. FA24021 PRINTHEAD ASSY 70 MICRON MK5 2M R/A 1 EX-STOCK FA24020 PRINTHEAD ASSY 70 MICRON MK5 4M 1 EX-STOCK FA24022 PRINTHEAD ASSY 70 MICRON MK5 4M R/A 1 EX-STOCK 1 FA72040 PRINTHEAD COVER TUBE ASSY 1 EX-STOCK 1 FA72092 P/H COVER TUBE ASSY MILD STEEL 1 EX-STOCK For a magnetic conveyor in order to shield the printhead Hall effect switch. 2 FA72102 CUT-AWAY COVER TUBE ASSY 1 EX-STOCK Not fitted as Standard. For use with Mk5 Midi printhead only. 3 FA73181 PRINTHEAD THUMB SCREW - PACK 5 EX-STOCK Parts Only Edition June 2013

9 Section 13 - Printheads - Mk5 Midi Parts Section 13 - Printheads - Mk5 Midi Parts 1 FA74070 CALIBRATED NOZZLE ASSEMBLY 62 MICRON (NON-FOOD 1 EX-STOCK An offset code is supplied with each nozzle. GRADE INK) 1 FA74193 CALIBRATED NOZZLE ASSEMBLY 70 MICRON (NON-FOOD 1 EX-STOCK An offset code is supplied with each nozzle. GRADE INK) FA68012 CALIBRATED NOZZLE ASSY CASE 1 EX-STOCK Parts Only Edition June 2013

10 Section 13 - Printheads - Mk5 Midi Parts FA20012 PRINTHEAD CALIBRATION LABEL - PACK 5 EX-STOCK 1 FA73195 GUN COVER MIDI RFP - MOULDED 1 EX-STOCK FA73053 NUT FULL HEX M2 SS - PACK 100 EX-STOCK Gun cover nut. FA73051 SCREW M2 X 6 PAN POZ SS - PACK 100 EX-STOCK Nozzle screw. FA73052 WASHER SHAKEPROOF M2 SS - PACK 100 EX-STOCK Washer for nozzle & gun cover. FA20011 NOZZLE O - RING - PACK 10 EX-STOCK Suitable for all printheads manufactured from August FA74046 NOZZLE CLEANING SERVICE ACCESSORY 1 EX-STOCK Refer to Manual for the Nozzle Cleaning Procedure. 2 FA73002 COVER TUBE MAGNET ASSY 1 EX-STOCK For Mk3B & Mk5 printheads only. 3 FA74129 PRINTHEAD SPLASH COVER - PACK 20 EX-STOCK To protect printheads against water ingress during wash down. 4 FA20006 BLIND GROMMET - PACK 10 EX-STOCK Fitted around printhead fluid pipes & around electrical wiring on TUV 6000 & CE FA CONN D-TYPE SHELL 15-WAY BLACK Obsolete FA D CONN FITTING TOOL Obsolete 6 FA20007 HEATSHRINK BOOT (MINI COAX) - PACK 3 EX-STOCK To fit mini coax plugs. 7 FA74028 MINI COAX CONN - PACK 5 EX-STOCK Part of cableform AS FA20008 INSULATED RECEPTACLE RED - PACK 20 EX-STOCK 9 FA WAY FLUID CONNECTOR 15 MICRON 1 EX-STOCK 9 FA WAY FLUID CONNECTOR 35 MICRON 1 EX-STOCK All white body with white plastic filter. 10 FA74135 M3 X 28 CSK POZ SS SCREW - PACK 10 EX-STOCK 11 FA74136 GASKET: FLUID CONNECTOR 3-WAY - PACK 10 EX-STOCK 12 FA WAY CONNECTOR REPLACEMENT FILTER 15/25 MICRON 1 EX-STOCK For use with FA20110 connector. Includes insert/extract tool & gasket. 12 FA WAY CONNECTOR REPLACEMENT FILTER 35/50 MICRON 1 EX-STOCK White plastic filter. For use with FA20254 connector.has insert/extract tool & gasket. 13 FA69003 IN-LINE GUTTER CHECK VALVE 1 EX-STOCK Prevents ink siphoning if Phd is below printer Linx inks 1240 & FA20001 HIGH FLOW GUTTER RESTRICTOR ASSY 1 EX-STOCK Suitable for use on Midi printheads only. FA SOLVENT RESISTANT CLEANING BRUSH 1 EX-STOCK FA71071 CABLEFORM MK4 70 MICRON RED 1 EX-STOCK Fit between printhead D-connector & Amplifier PCB (refer to Service Bulletin SB0347). FA71072 CABLEFORM MK5 70 MICRON YELLOW 1 EX-STOCK Fit between printhead D-connector & Amplifier PCB (refer to Service Bulletin SB0347). 14 FA65006 TOOLS 1/8 UNION FITTING 1 4 WEEKS Only for printheads fitted with 1/8 union fitting connectors. FA65007 BLANKING SET 1/8 UNION FITTING 3 4 WEEKS Only for printheads fitted with 1/8 union fitting connectors. FA65008 FERRULES 1/8 UNION FITTING - PACK 10 4 WEEKS Only for printheads fitted with 1/8 union fitting connectors. FA73048 PROTECTION CAP SILICONE - PACK Obsolete Parts Only Edition June 2013

11 Section 13 - Printheads - Mk7 Ultima Mk7 Ultima Printhead Mk7 Ultima R/A Printhead Section 13 - Printheads - Mk7 Ultima FA22054 PRINTHEAD ASSY ULTIMA MK7 2M 1 EX-STOCK FA22058 PRINTHEAD ASSY ULTIMA MK7 2M R/A 1 EX-STOCK FA22056 PRINTHEAD ASSY ULTIMA MK7 4M 1 EX-STOCK FA22060 PRINTHEAD ASSY ULTIMA MK7 4M R/A 1 EX-STOCK FA25014 PRINTHEAD ASSY ULTIMA PLUS MK7 2M 1 EX-STOCK FA25022 PRINTHEAD ASSY ULTIMA PLUS MK7 2M R/A 1 EX-STOCK FA25016 PRINTHEAD A+D2523SSY ULTIMA PLUS MK7 4M 1 EX-STOCK Parts Only Edition June 2013

12 Section 13 - Printheads - Mk7 Ultima FA25020 PRINTHEAD ASSY ULTIMA PLUS MK7 4M R/A 1 EX-STOCK Parts Only Edition June 2013

13 Section 13 - Printheads - Mk7 Midi Mk7 MIDI Printhead Mk7 MIDI R/A Printhead Mk7 MIDI Short Reach R/A Printhead Section 13 - Printheads - Mk7 Midi FA22053 PRINTHEAD ASSY MIDI MK7 2M 1 EX-STOCK FA22057 PRINTHEAD ASSY MIDI MK7 2M R/A 1 EX-STOCK FA22055 PRINTHEAD ASSY MIDI MK7 4M 1 EX-STOCK FA22059 PRINTHEAD ASSY MIDI MK7 4M R/A 1 EX-STOCK Parts Only Edition June 2013

14 Section 13 - Printheads - Mk7 Midi FA25013 PRINTHEAD ASSY MIDI PLUS MK7 2M 1 EX-STOCK FA25021 PRINTHEAD ASSY MIDI PLUS MK7 2M R/A 1 EX-STOCK FA25015 PRINTHEAD ASSY MIDI PLUS MK7 4M 1 EX-STOCK FA25019 PRINTHEAD ASSY MIDI PLUS MK7 4M R/A 1 EX-STOCK FA22061 PRINTHEAD ASSEMBLY MK7 MIDI EC 1 EX-STOCK FA22063 MK7 ULTIMA A PRINTHEAD 2M STRAIGHT 1 EX-STOCK FA22064 MK7 ULTIMA A PRINTHEAD 4M STRAIGHT 1 EX-STOCK FA22065 MK7 ULTIMA A PRINTHEAD 2M R/A 1 EX-STOCK FA22066 MK7 ULTIMA A PRINTHEAD 4M R/A 1 EX-STOCK FA22250 PRINTHEAD ASSY MIDI MK7 SRRA 2M 1 EX-STOCK FA22251 PRINTHEAD ASSY MIDI MK7 SRRA 4M 1 EX-STOCK FA22252 MK7 PRINTHEAD MIDI A 2M 1 EX-STOCK FA22253 MK7 PRINTHEAD MIDI A 4M 1 EX-STOCK FA22254 MK7 PRINTHEAD MIDI A 2M R/A 1 EX-STOCK FA22255 MK7 PRINTHEAD MIDI A 4M R/A 1 EX-STOCK Parts Only Edition June 2013

15 Section 13 - Printheads - Mk7 Midi and Ultima Parts Section 13 - Printheads - Mk7 Midi and Ultima Parts 1 FA WAY FLUID CONNECTOR 15 MICRON 1 EX-STOCK 1 FA WAY FLUID CONNECTOR 35 MICRON 1 EX-STOCK All white body with white plastic filter. 2 FA74135 M3 X 28 CSK POZ SS SCREW - PACK 10 EX-STOCK 3 FA74136 GASKET: FLUID CONNECTOR 3-WAY - PACK 10 EX-STOCK Parts Only Edition June 2013

16 Section 13 - Printheads - Mk7 Midi and Ultima Parts 4 FA WAY CONNECTOR REPLACEMENT FILTER 15/25 MICRON 1 EX-STOCK For use with FA20110 connector. Includes insert/extract tool & gasket. 4 FA WAY CONNECTOR REPLACEMENT FILTER 35/50 MICRON 1 EX-STOCK White plastic filter. For use with FA20254 connector.has insert/extract tool & gasket. 5 FA20008 INSULATED RECEPTACLE RED - PACK 20 EX-STOCK 6 FA20288 NRV MK7 PRINTHEAD 1 EX-STOCK 7 FA73181 PRINTHEAD THUMB SCREW - PACK 5 EX-STOCK 8 FA20115 GUN COVER ASSY MK7 1 EX-STOCK 9 FA74194 CALIBRATED NOZZLE ASSEMBLY 75 MICRON (NON-FOOD 1 EX-STOCK For MK7 plus printheads for spectrum & pigmented inks. GRADE INK) 9 FA74202 MK7 MIDI EC NOZZLE ASSY (FG INK 6100) 1 EX-STOCK For Ultima A; Midi A & Midi EC printheads. For Midi & Ultima printheads use FA FA74070 CALIBRATED NOZZLE ASSEMBLY 62 MICRON (NON-FOOD 1 EX-STOCK An offset code is supplied with each nozzle. GRADE INK) 9 FA20011 NOZZLE O - RING - PACK 10 EX-STOCK Suitable for all printheads manufactured from August FA68012 CALIBRATED NOZZLE ASSY CASE 1 EX-STOCK FA74046 NOZZLE CLEANING SERVICE ACCESSORY 1 EX-STOCK Refer to Manual for the Nozzle Cleaning Procedure. FA20012 PRINTHEAD CALIBRATION LABEL - PACK 5 EX-STOCK 10 FA74219 MK7 PRINTHEAD VALVE FILTER ASSEMBLY 15 MICRON 1 EX-STOCK Replacement filter for Mk7 Ultima & Mk7 Midi printhead valve assemblies. 10 FA74221 MK7 PRINTHEAD VALVE FILTER ASSEMBLY 35 MICRON 1 EX-STOCK 11 FA77120 O - RING PACK 10 EX-STOCK Used in Mk7 printhead filter assembly with Stainless Steel venturi. 12 FA74160 PRINTHEAD VALVE ASSEMBLY MK7 1 EX-STOCK 13 FA74129 PRINTHEAD SPLASH COVER - PACK 20 EX-STOCK To protect printheads against water ingress during wash down. 14 FA74159 COVER TUBE MAGNET ASSEMBLY 1 EX-STOCK 15 FA72134 MK7 COVER TUBE ASSY STRAIGHT 1 EX-STOCK Standard cover tube shipped with a printer that has a MK7 head. FA20334 MK7 MAGNETIC SCREENED REDUCED SLOT COVER ASSY 1 EX-STOCK To reduce chance of dust ingress in dusty environments. FA72147 MK7 MAGNETIC SCREEN COVER TUBE STRAIGHT 1 EX-STOCK Shields the Printhead Cover Hall Effect Sensor from magnetic fields. FA20335 MK7 REDUCED SLOT COVER ASSY 1 EX-STOCK To reduce chance of dust ingress in dusty environments. 16 FA72129 MK7 CUT-AWAY COVER TUBE ASSY 1 EX-STOCK 17 FA72162 COVER TUBE ASSEMBLY - SRRA 1 EX-STOCK FA20001 HIGH FLOW GUTTER RESTRICTOR ASSY 1 EX-STOCK Suitable for use on Midi printheads only. FA69003 IN-LINE GUTTER CHECK VALVE 1 EX-STOCK Prevents ink siphoning if Phd is below printer Linx inks 1240 & FA67050 POSITIVE AIR UPGRADE INTERNAL 1 EX-STOCK Positive air pump for Mk7 printhead. Used in harsh environmental conditions. Parts Only Edition June 2013

17 Section 13 - Printheads - Mk7 Mini and Micro Mini Mk7 Printhead Mini Mk7 R/A Printhead Section 13 - Printheads - Mk7 Mini and Micro FA26001 PRINTHEAD ASSY MINI MK7 2M 1 EX-STOCK FA26002 PRINTHEAD ASSY MINI MK7 4M 1 EX-STOCK FA26003 PRINTHEAD ASSY MINI MK7 2M R/A 1 EX-STOCK FA26004 PRINTHEAD ASSY MINI MK7 4M R/A 1 EX-STOCK Parts Only Edition June 2013

18 Section 13 - Printheads - Mk7 Mini and Micro FA28001 PRINTHEAD ASSY MICRO MK7 2M 1 EX-STOCK FA28002 PRINTHEAD ASSY MICRO MK7 4M 1 EX-STOCK FA28003 PRINTHEAD ASSY MICRO MK7 2M R/A 1 EX-STOCK FA28004 PRINTHEAD ASSY MICRO MK7 4M R/A 1 EX-STOCK Parts Only Edition June 2013

19 Section 13 - Printheads - Mk7 Mini and Micro Parts Section 13 - Printheads - Mk7 Mini and Micro Parts 1 FA WAY FLUID CONNECTOR 15 MICRON 1 EX-STOCK 2 FA74135 M3 X 28 CSK POZ SS SCREW - PACK 10 EX-STOCK 3 FA74136 GASKET: FLUID CONNECTOR 3-WAY - PACK 10 EX-STOCK 4 FA WAY CONNECTOR REPLACEMENT FILTER 15/25 MICRON 1 EX-STOCK For use with FA20110 connector. Includes insert/extract tool & gasket. Parts Only Edition June

20 Section 13 - Printheads - Mk7 Mini and Micro Parts 5 FA20008 INSULATED RECEPTACLE RED - PACK 20 EX-STOCK 6 FA74218 NOZZLE ASSY 50UM 1 EX-STOCK For Mk7 Mini printhead. An offset code is supplied with each nozzle. FA74241 CALIBRATED NOZZLE ASSEMBLY 40 MICRON 1 EX-STOCK An offset code is supplied with each nozzle. FA68012 CALIBRATED NOZZLE ASSY CASE 1 EX-STOCK FA74046 NOZZLE CLEANING SERVICE ACCESSORY 1 EX-STOCK Refer to Manual for the Nozzle Cleaning Procedure. FA20011 NOZZLE O - RING - PACK 10 EX-STOCK Suitable for all printheads manufactured from August FA73181 PRINTHEAD THUMB SCREW - PACK 5 EX-STOCK 8 FA74219 MK7 PRINTHEAD VALVE FILTER ASSEMBLY 15 MICRON 1 EX-STOCK Replacement filter for Mk7 Ultima & Mk7 Midi printhead valve assemblies. 9 FA77120 O - RING PACK 10 EX-STOCK Used in Mk7 printhead filter assembly with Stainless Steel venturi. 10 FA74160 PRINTHEAD VALVE ASSEMBLY MK7 1 EX-STOCK FA20012 PRINTHEAD CALIBRATION LABEL - PACK 5 EX-STOCK 11 FA74129 PRINTHEAD SPLASH COVER - PACK 20 EX-STOCK To protect printheads against water ingress during wash down. 12 FA74159 COVER TUBE MAGNET ASSEMBLY 1 EX-STOCK 13 FA72134 MK7 COVER TUBE ASSY STRAIGHT 1 EX-STOCK Standard cover tube shipped with a printer that has a MK7 head. FA20288 NRV MK7 PRINTHEAD 1 EX-STOCK Parts Only Edition June 2013