MITSUBISHI GENERAL-PURPOSE PROGRAMMABLE LOGIC CONTROLLER

Transcription

1 RUN ERR 1 2 SD RD DA DB DG SLD A80BD-J61BT11 BD808C083G51 BDNO. BDNO. HIGH LOW ADVANCED AND EVER ADVANCING MITSUBISHI ELECTRIC MITSUBISHI GENERAL-PURPOSE PROGRAMMABLE LOGIC CONTROLLER 2000 No.121E NEW PRODUCT RELEASE Type A80BDE-J61BT11 CC-Link System Master/Local Interface Board New!! Type A80BDE-J61BT11 CC-Link System Master/Local Interface Board You can now control each station in the CC-Link system using your IBM-PC/AT compatible personal computer as the master station. IBM-PC/AT compatible personal computer A80BDE-J61BT11 Master station A80BDE-J61BT11 Remote I/O station HIGH LOW Partner maker product Remote device station BD NO. Remote I/O station Local station Intelligent device station PLC CPU [Features] 1) An IBM-PC/AT compatible personal computer can be assembled into the CC-Link system. " By mounting the A80BDE-J61BT11 in a IBM-PC/AT compatible personal computer, the IBM-PC/AT compatible personal computer can be used as the master station, standby master station or local station. " By using the A80BDE-J61BT11 as the master station, the remote I/O station, remote device station, intelligent device station and local station can be controlled. 2) Drivers compatible with each OS are available. Various drivers are available so a system matching the user's environment can be easily structured. Compatible OS Usable functions Master station functions Local station functions Windows 95 (English Version) # Windows 98 (English Version) # Windows NT Workstation 4.0 (English Version) # # #: Compatible, : Incompatible

2 3) Bothersome switch settings are eliminated by incorporating the PCI bus. Initialization is automatically carried out by mounting onto the PCI bus. 4) Various CC-Link system settings can be used with the Utility. The various settings required for structuring the CC-Link system can be set on the CC-Link Utility. The CC-Link system parameter settings, test and monitor states can be set and displayed, so operations are easy. 5) Functions corresponding to user programming are available. By using the functions corresponding to Visual C++ and Visual Basic, the remote I/O station, remote device station, intelligent device station and local station can be remotely controlled, and the devices can be read and written. This allows user applications to be created easily. Example: Remote I/O station input X or output Y ON/OFF control Remote device station (analog module) analog voltage output control Intelligent device station (RS-232C module) communication control [Performance specifications] The performance specifications of the A80BDE-J61BT11 are shown below. Item Transmission speed Maximum transmission distance Maximum number of connected stations Number of occupied stations (for local stations) Maximum number of link points per system Number of link points per remote/local station Specifications Select from 156kbps, 625kbps, 2.5Mbps, 5Mbps or 10Mbps Deffers depending on the transmission speed. 64 modules Note that the following conditions must be satisfied. 1) {(1 a)+(2 b)+(3 c)+(4 d)} 64 a: Number of modules occupied by 1 station b: Number of modules occupied by 2 stations c: Number of modules occupied by 3 stations d: Number of modules occupied by 4 stations 2) {(16 A)+(54 B)+(88 C)} 2304 A: Number of remote I/O station modules 64 modules B: Number of remote device station modules 42 modules C: Number of local station, standby master station, intelligent device station modules 26 modules 1 station or 4 stations Remote input/output (RX, RY): 2048 points Remote register (RWw): 256 points (master station remote/local station) Remote register (RWr): 256 points (remote/local station master station) Remote input/output (RX, RY): 32 points (30 points for local station) Remote register (RWw): 4 points (master station remote/local station) Remote register (RWr): 4 points (remote/local station master station) Polling method Frame synchronous method NRZI method Bus (RS-485) Conforms to HDLC Communication method Synchronous method Encoding method Transmission path Transmission format Error control system CRC (X 16 + X 12 + X 5 +1) Connection cable CC-Link dedicated cable/cc-link dedicated high performance cable *1 Number of mountable modules Maximum 4 modules *2 Mounting slot IBM-PC/AT compatible personal computer PCI bus slot Number of occupied slots 1 slot 5VDC internal power consumption 0.4 A Weight 0.16 kg (0.35lb) *1: The CC-Link dedicated cable and CC-Link dedicated high performance cable cannot be used together. *2: The maximum number of used modules is the combination of the A80BDE-J61BT11 and A80BDE-J61BT13.

3 [List of functions] The A80BDE-J61BT11 functions are shown below. Item Outline of function Communication with remote The ON/OFF information is exchanged with the remote I/O station. I/O station Communication with remote The ON/OFF information and numerical data is exchanged with the remote device device station station. Communication with intelligent Data is exchanged with the intelligent device station/local station using cyclic device station/local station transmission and transient transmission. Slave station separation The module disabled from the data link because of power ON/OFF, etc., is function separated, and the data link is continued with only the normal modules. When the module that has been disabled from the data link because of power Automatic return function ON/OFF, etc., is recovered to the normal state, it automatically participates in the data link. Setting of input state from data The input (reception) data state (clear/hold) is set from the station for which the data link fault station link is faulty due to power OFF, etc. Standby master station By switching to the standby master station when there is an error in the master function *1 station, the data link can be continued. Communication is carried out with all stations (remote station, local station, intelligent Remote net mode device station and standby master station). By setting a module to be connected in the future as the reserved station, it will not Reserved station function be handled as a data link fault station. If this is designated for a connected module, the data link will be disabled. Error invalid station setting By setting the module for which the power is turned OFF due to the system structure function in the network parameters, it will not be handled as a data link fault station. Data link stop/restart The data link can be stopped and restarted while executing the data link. Station No. duplication check This checks whether the same station No. is duplicated in the system. *1: The standby master station function can be used only when both the master station and standby master station are the A80BDE-J61BT11. [List of functions] The following functions can be used from the application software to access the data in the PLC. Function name Function Function name Function mdopen Opening communication line. mdinit Refreshing PLC device address. mdclose Closing communication line. mdbdrst Resetting the local board. mdsend Batch writing to a device. mdbdmodset Setting the mode of the local board. mdreceive Batch reading from a device. mdbdmodread Reading the mode of the local board. mdrandw Random writing to a device. mdbdledread Reading the states of LEDs on the mdrandr Random reading from a device. local board. mddevset Setting a bit device. mdbdswread Reading the states of switches on the mddevrst Resetting a bit device. local board. mdtyperead Reading PLC CPU type. mdbdverread Reading the version of the local board. mdcontrol Remote RUN/STOP/PAUSE.

4 [Utility] The CC-Link Utility has various utility functions to connect and monitor the A80BDE-J61BT11 to the CC-Link system. 1) CC-Link Utility Using the CC-Link Utility, the CRT can be used to confirm the A80BDE-J61BT11 state, various information and test the line. Information Board Information Version CC- Link Utility Network Monitor Network Test Station's Link Status Memory I/ O test Menu Information Board Information Network Monitor Station's Link Status Memory I/O Test Network Test Version Details Displays the information of the hardware set to the A80BDE-J61BT11. Displays and sets the various information regarding the mounted A80BDE-J61BT11. Monitors the line state of the local station. Displays the line state of the other stations. Diagnosis the 2-port memory and I/O port used by the A80BDE-J61BT11. Tests the mounted A80BDE-J61BT11. Displays the CC-Link Utility version.

5 2) Setting the parameters By selecting "Parameter Setting" on the Board Information screen, the following screen will appear, and the parameters can be set on the CC-Link Utility. (This can be selected only when the A80BDE-J61BT11 is the master station.) CC-Link Utility (Board Information) Parameter Setting screen Parameter Setting screen appears when clicked on. Click!! Menu Number of Connected modules Auxiliary Setting No. St. Occupy Staion Type Station Specify Intelligent Buffer Specify (Word) Details Set the number of modules connected to the CC-Link system. Set the various details. The number of modules set for the number of connected modules is displayed. The station No. is displayed. Set the number of occupied stations (1 to 4 stations). Set the station type (remote I/O station, remote device station, intelligent station). Set the module state (reserved station, error invalid station, no setting). Designate the transmission area, reception area and automatic update area (word unit) of the intelligent device station. [Working environment] The working environment of the A80BDE-J61BT11 is shown below. Item IBM-PC/AT compatible personal computer Basic software (OS) *2 Programming language PCI bus specifications Details IBM-PC/AT compatible personal computer running Windows 95, Windows 98 or Windows NT Workstation 4.0 with Pentium 133MHz or more and one or more PCI bus slot (half-size). *1 5VDC, 32-bit bus Basic clock: 33MHz Windows 95 (English Version), Windows 98 (English Version) or Windows NT Workstation 4.0 (English Version). Visual Basic 5.0 (English Version), Visual Basic 6.0 (English Version), Visual C (English Version), Visual C (English Version) 32MB or more 15MB or more Required memory size Open hard disk space Disk drive 3.5-inch (1.44MB) floppy disk drive (required for installing driver) *1: The multi-processor compatible IBM-PC/AT compatible personal computer is incompatible with the driver and cannot be used. *2: When using the A80BDE-J61BT11 as the master station, use the Windows NT Workstation 4.0 (English Version) as the OS. [Relation with conventional product] 1) Precaution for combining with A80BDE-J61BT13 " When using the A80BDE-J61BT11 with a IBM-PC/AT compatible personal computer in which A80BDE- J61BT13 is mounted, uninstall the SWnDNF-CCLINK enclosed with the A80BDE-J61BT13, and then install the SW3DNF-CCLINK enclosed with the A80BDE-J61BT11. 2) Compatibility " The user program EXE file generated using MDFUNC32.LIB enclosed with the A80BDE-J61BT13 SWnDNF-CCLINK must be relinked with the MDFUNC32.LIB enclosed with the new software package.

6

7 [Product Configuration] Product name Type Type code Remarks Type A80BDE-J61BT11 CC-Link System Master/Local Interface Board [Manuals] A80BDE-J61BT11 1W5003 A80BDE-J61BT11 1 set FD (SW3DNF-CCLINK) 1 set Manual 1 set Terminator (two types) 1 set Software Agreement 1 Manual name Manual shipment state IB/SH No. Type code Type A80BDE-J61BT11 CC-Link System Master/Local Interface Board User s Manual Enclosed with product IB JR14 Microsoft Windows, Microsoft Windows NT, Microsoft Visual Basic and Microsoft Visual C++ are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. Other company names and products names appearing in this document are the registered trademarks or trademarks of the respective company. Country/Region Sales office Tel/Fax U.S.A Mitsubishi Electric Automation Inc. Tel : Corporate Woods Parkway Vernon Hills, IL FAX : Brazil Germany U.K South Africa Hong Kong China Taiwan Korea Singapore Thailand Indonesia India Australia MELCO-TEC Rep. Com.e Assessoria Tecnica Ltda. Av. Rio Branco, ,and S/1507, Rio de Janeiro, RJ CEP , Brazil Mitsubishi Electric Europe B.V. German Branch Gothaer Strasse 8 D Ratingen, GERMANY Mitsubishi Electric Europe B.V. UK Branch Travellers Lane, Hatfield, Herts., AL10 8XB,UK MSA Manufacturing (Pty) Ltd. P O Box Bramley Johannesburg, South Africa Ryoden International Ltd. 10th Floor, Manulife Tower, 169 Electric Road, North Point, HongKong Ryoden International Shanghai Ltd. 3F Block5 Building Automation Instrumentation Plaza 103 Cao Bao Rd. Shanghai China Setsuyo Enterprise Co., Ltd. 6F., No.105 Wu-Kung 3rd.RD, Wu-Ku Hsiang, Taipei Hsine, Taiwan R.O.C. STC Techno Seoul Co., Ltd. 1F Dong Seo Game Channel Bldg., ,Deungchon-dong Kangsec-ku, Seoul, Korea Mitsubishi Electric Asia Pte, Ltd. 307 ALEXANDRA ROAD #05-01/02, MITSUBISHI ELECTRIC BUILDING SINGAPORE F. A. Tech Co.,Ltd. 1138/33-34 Rama 3 Road, Yannawa, Bangkok 10120, Thailand P.T. Autoteknindo SUMBER MAKMUR Kompleks Agung Sedayu Propertindo (Harco Mangga Dua) Blok H No.4 JI Mangga Dua Raya Jakarta Pusat Indonesia. Messung Systems Put,Ltd. Electronic Sadan NO:111 Unit No15, M.I.D.C BHOSARI,PUNE Mitsubishi Electric Australia Pty. Ltd. 348 Victoria Road, PostalBag, No 2, Rydalmere, N.S.W 2116, Australia Tel : FAX : Tel : FAX : Tel : FAX : Tel : FAX : Tel : FAX : Tel : FAX : Tel : FAX : Tel : Fax : Tel : FAX : Tel : FAX : Tel : FAX : Tel : FAX : Tel : FAX : HEAD OFFICE:MITSUBISHI DENKI BLDG MARUNOUCHI TOKYO TELEX:J24532 CABLE MELCO TOKYO 2000 (MEE) Specifications subject to change without notice. Printed in Japan on recycled paper.